Extensional Stress Research Articles

Hierarchical Structure of Polystyrene/Styrene–Butadiene Block Copolymer System Tailored by Extensional Stress and Its Relationship with Ductility–Stiffness Balance

Hierarchical Structure of Polystyrene/Styrene–Butadiene Block Copolymer System Tailored by Extensional Stress and Its Relationship with Ductility–Stiffness Balance

Paleogeographic implication of a titanosaur eggshell from the Neogene of the Entre Ríos Province, Argentina

The Lower Member of the Ituzaingó Formation (LMIF), fluvial in origin and assigned to the Upper Miocene, contains a conglomerate level known as “Mesopotamiense” or “Conglomerado osífero” that has yielded a rich fauna of vertebrates. The aim of this contribution is to describe a titanosaurian dinosaur eggshell fragment recovered from the LMIF at the locality of Toma Vieja (western Entre Ríos Province), discussing its paleogeographic history and implications. Fragments of eggshells referred to Titanosauria are frequent from litostratigraphic units of the Upper Cretaceous of western Uruguay (e.g., Guichón, Mercedes, and Queguay Formations). Besides, a fragment of eggshell recovered from the Puerto Yeruá Formation (Upper Cretaceous) at eastern Entre Ríos Province was described. Geophysical data from the Entre Ríos Province allow to propose the presence of a Lower Cretaceous field of extensional tectonic stresses that generated structural lineaments with a E-W and ENE-WSW trend. This ancient penetrative Cretaceous tectonic framework would have exerted control on the shape of the basin and sediment flow patterns and subsequent sedimentation, by promoting the generation of accommodation space over the late Paleogene and the Neogene. The phenomenon would have conditioned the deposition of the Fray Bentos Formation, the subsequent marine Paraná Formation, and the sedimentation of the LMIF, with source materials coming from the east. Thus, it is hypothesized that the fragment of eggshell of Titanosauria would come from the eastern area of the basin (western Uruguay) as a consequence of the existence of a paleohydric system with predominantly E-W and ENE-WSW directions. This late Neogene system would have been controlled by inherited Cretaceous structural lineaments with orientations similar to those that also govern the current fluvial systems of western Uruguay, developed on the Mesozoic substrate.

Inhomogeneous strain partitioning in the Cenozoic Bohai Bay Basin controlled by pre-existing crustal fabrics and oblique subduction: Insights from the Jizhong and Huanghua subbasins

The tectonic features and geodynamics of the Bohai Bay Basin (BBB) have been extensively studied over several decades. It is generally accepted that the Cenozoic BBB was subjected to a superimposed extensional and strike-slip stress field. However, the specific basin-forming mechanism remains ambiguous. Basin-scale studies with high spatial and temporal resolution reveal how strain migrates and localizes during multiphase rifting. Understanding these strain-related processes is crucial for deciphering the formation mechanisms and controlling factors of rift basins. This study investigates the rift-related evolution and strain partitioning in the Jizhong and Huanghua subbasins, the western half of the BBB. Using high-resolution 3D and 2D seismic datasets and well data, we present detailed geological sections, residual thickness maps, and fault systems, showing two distinct patterns of strain partitioning in the Cenozoic. In the Jizhong Subbasin, strain migrated inwards from the NE-trending boundary faults and finally became localized along the NE-trending rift axis; in the Huanghua Subbasin, strain migrated northeastwards from the southern part and then was largely localized along the near E–W-trending faults in the northeastern part. By integrating our results with previous studies of other subbasins, we identify two separate extensional domains within the Cenozoic BBB. The suborthogonal extensional domain in the Jizhong Subbasin is dominated by relatively stable NW–SE extension. In contrast, the extended areas to the east (i.e., the Huanghua, Bozhong, and Liaohe-Liaodongwan subbasins) comprise the oblique extensional domain, characterized by asymmetric transtensional pull-apart deformation and subjected to a clockwise-rotated extensional stress field from NW–SE to NNW–SSE. We suggest that the spatially inhomogeneous strain partitioning in the BBB has developed since the middle Eocene, and was controlled by the interaction of pre-existing crustal fabrics (e.g., the Tan-Lu Fault Zone) and the oblique subduction of the Pacific Plate. The boundary between the two domains may represent a transition zone where the margin-parallel residual velocity component of the oblique convergence decreased considerably landwards. Our study highlights the Cenozoic strain evolution and the associated geodynamics in the BBB, emphasizing the strain complexity within the back-arc rift basin under the oblique subduction background.

Crustal seismicity and updated stress mapping in the Bolivian Orocline, Central Andes

The Central Andes region, with significant seismic activity, has distinct faulting mechanisms across its varied topography. Notably, the sub-Andean province predominantly features reverse faulting, whereas the high Andean plateau shows a predominance of normal and strike-slip faults. Despite the importance of this extensive orogenic plateau, Bolivia remains under-documented in seismic studies. We used data from recently installed seismic stations in Bolivia and regional stations in Brazil to determine 13 new focal mechanisms of shallow crustal earthquakes in Bolivia, some of them felt in major cities. Employing probabilistic full waveform moment tensor inversion and P-wave polarities, we mapped the stress distribution across the Central Andes. The main patterns of faulting mechanisms were: reverse faulting along the NW-SE trending sub-Andean belt north of the Orocline (north of Cochabamba) with NE-SW compression; reverse faulting along the N-S trending sub-Andean belt south of the Orocline (south of Santa Cruz) with ∼ E-W oriented compression; strike-slip faulting within the Eastern Cordillera with NE-SW P axes. The results indicate that the sub-Andean belt experiences compressional forces perpendicular to the front of the Andean plateau, arising from both the spreading stresses of the plateau and the broader plate-wide compression. On the other hand, the high plateau (Altiplano) is characterized by normal and strike-slip mechanisms, suggesting a dynamic equilibrium between local extensional gravitational stresses and regional compressional forces due to the Nazca plate convergence.

Recent and active faulting along the exposed front of the Northern Apennines (Italy): New insights from field and geochronological constraints

Establishing genetic links between active shallow faulting and deep seismogenic sources is challenging, especially in areas where seismogenic faults lack clear and readily interpretable geological evidence at the surface. The architecture of the Pedeapenninic margin of the Northern Apennines (Italy) reflects a regional-scale and complex NE-verging blind thrust system, which is dissected by transpressive/transtensive faults resulting from active NE-SW orogenic compression. The local geological framework is defined by allochthonous ocean-derived units resting atop Pliocene-to-present successions exposed along the Northern Apennines margin and to the NE of it, while the innermost chain sector mostly contains Adria-related units. We present results from field structural-geological investigations to identify and characterize potential active faults along the margin. There, the Pliocene-to-present units are faulted and folded, indicating that tectonic activity is still on-going, thus contributing to the local seismic hazard. Top-to-the NE and SW normal faults are common in the area and deform the Pliocene-to-present succession together with NE-SW strike-slip and transpressional/transtensional faults. Based on field evidence, we define four potentially active thrust segments affecting Middle Pleistocene to Holocene deposits exposed along the margin. Calcite U-Th dating on samples from faults extend the most recent datable tectonic activity back to the Middle Pleistocene. Paleostress analysis from inversion of fault-slip data from the most recent identified striated fault planes constrains a NE-SW shortening direction parallel to the Apennines regional migration direction. A distinct but coaxial extensional stress regime, recorded by structures measured within Plio-Pleistocene formations, was also identified. Our results offer a sound starting point for future investigations aimed at improving our understanding of active and seismogenic faulting in the area, so as to create robust Probabilistic Seismic and Fault Displacement Hazard Assessment (PSHA and PFDHA) models that can implement refined seismic hazard maps benefitting from structural-geological deterministic inputs in addition to the classic seismological constraints.

Dynamic changes of gravity field before the Luding MS6.8 earthquake and its crustal material migration characteristics

On September 5, 2022, an earthquake of magnitude MS6.8 occurred in Luding County, Sichuan Province. This earthquake occurred at the key part of the southeast-clockwise extrusion of material on the eastern margin of the Qinghai–Xizang Plateau, the Y-shaped confluence of the Xianshuihe, Longmenshan and Anninghe fault zones. In this study, the three-dimensional dynamic crustal density changes in the earthquake area are obtained by the typical gravity change data from 2019 to 2022 before the earthquake and gravity inversion by growing bodies. The results indicate that gravity changes presented an obvious four-quadrant and gradient belt distribution in the Luding area before the earthquake. The three-dimensional density horizontal slices show that small density changes occurred at the epicenter in the mid-to-upper crust between 2019.9 - 2020.9 and 2019.9–2021.9. At the same time, the surrounding areas exhibited a positive and negative quadrant distribution. These observations indicate that the source region was likely in a stable locked state, with locking-in shear forces oriented in the NW and NE directions. From 2021.9 to 2022.8, the epicentral region showed negative density changes, indicating that the source region was in the expansion stage, approaching a near-seismic state. The three-dimensional density vertical slices reveal a southeastward migration of positive and negative densities near the epicenter and on the western of the Xianshuihe Fault Zone, indicating that the material is flowing out to the southeast. The observed local negative density changes at the epicenter along the Longmenshan Fault Zone are likely associated with the NE-oriented extensional stress shown by the seismic source mechanism. The above results can provide a basis for interpreting pre-earthquake gravity and density changes, thereby contributing to the advancement of earthquake precursor theory.

Fluid flow in the Katanga Supergroup: From Lufilian brittle tectonic stages to the post-Lufilian period (Democratic Republic of Congo)

The metasedimentary rock succession of the Neoproterozoic-Cambrian Katanga Supergroup in the Central Africa Copperbelt shows evidence of several complex tectonic events. The deformation of this supergroup started from the tectonic inversion at about 570 Ma and lasted up to today, but reached paroxysm at ∼550 Ma. This long period was characterized by folding and faulting throughout multiple compressive and extensional events, which controlled the regional fluid flow on the one hand, and played an important role during formation of the stratiform to stratabound Cu-Co (Ni, U) deposits and the polymetallic Cu-Zn-Pb (Ag, Ge, Mo, Cd) vein type deposits on the other hand. Based on the structural analysis and paleostress reconstruction, coupled with fluid inclusion characterization from mineralized structures in rocks from the Nguba, Kundelungu and Biano Groups, this study demonstrates that the composition of hydrothermal fluids changed during brittle tectonic deformation during the Lufilian orogeny and subsequent uplift and post-Lufilian faulting.During early brittle tectonic deformation along strike slip faults with sinistral and dextral movement related to a NE-SW transpression, the Cu-mineralizing fluid was hypersaline (27.9–31.1 eq. wt% NaCl) with moderate temperatures (Th = 128–216 °C). The subsequent Cu or Cu (Zn, Pb) mineralization formed within an E-W extensional stress regime, related to the late Lufilian orogenic collapse. The fluid inclusions present in the gangue minerals associated with this latter mineralization show a large range in Th (50–264 °C) and salinity (26.7–36.0 eq. wt% NaCl). The decrease in temperature is interpreted to be due to migration of the fluids at shallower depth in the subsurface after uplift and erosion of the orogen. The increased salinity of the fluid is related to the dissolution of evaporites, mainly NaCl. A second H2O-NaCl-CaCl2 fluid with a homogenization temperature below 55 °C has also been found associated with this brittle stage and mineralization phase, but only in rocks belonging to the Kundelungu Group. A third mineralization phase, also characterized by Cu or Cu (Zn, Pb), formed during the post-Lufilian period within a NW-SE transpressional inversion regime. The fluid inclusion in the gangue minerals of this mineralization phase have a smaller range in homogenization temperature (Th = 37–172 °C) and the largest range in salinity (0.71–30 eq. wt% NaCl), compared to the earlier fluid inclusions generations. This large range in salinity may be explained by the mixing of a high salinity fluid, already present during the earlier tectonic stages in the sedimentary basin, with meteoric water. During the more recent rift-related extension, a fluid with again a large and higher range in homogenization temperatures (Th = 47–257 °C) and with a typical low salinity (<10 eq. wt% NaCl) has been recognized in minerals filling NNE-SSW to NE-SW oriented faults and fractures. The upward migration of a relatively low-salinity fluid from deeper parts in the subsurface explains the variation in the temperatures observed with this tectonic event.

Partial melting of arclogite and petrogenesis of alkaline-silicate complexes

Magmatic processing in the lower crust of thick-crusted (>40 km) arcs generates garnet-rich clinopyroxenite residues (arclogites) that are denser than the underlying mantle and therefore susceptible to foundering. Arclogites, which can contain substantial amphibole, may undergo partial melting as they sink into the subarc mantle. To constrain the geochemical composition of arclogite-derived melts and the role of arclogite in magmagenesis, we conducted partial melting experiments on average amphibole-bearing arclogite ARC15 at 2 GPa from 1040 to 1300 °C. At subsolidus conditions, garnet and clinopyroxene coexist with lesser amounts of amphibole, ilmenite, and biotite. Hydrous ARC15 begins melting between 1040 and 1080 °C. Once amphibole and biotite are exhausted by 1140 and 1190 °C, respectively, garnet becomes the primary melting phase according to the reaction 0.8 Garnet + 0.2 Clinopyroxene = 1 Melt. At 1300 °C, ARC15 yields 18 wt.% melt, indicating an anomalously low melt productivity of 0.12%/°C and rendering it the least melt-productive of all experimental pyroxenites investigated at 2 GPa. Geochemically, melts sourced from ARC15 are predominantly basanitic with low SiO2 (43–52 wt.%) and high FeO (10–17 wt.%), TiO2 (2.5–3.7 wt.%), and alkali (Na2O + K2O = 3–6.5 wt.%) contents. Such compositions do not resemble magmas erupted at thick-crusted arcs, indicating that arclogites are not a dominant source of magmatism in these settings. Rather, the compositions of ARC15 melts more closely match those of magmas emplaced at post-collisional alkaline-silicate complexes, which form as a result of orogenic collapse and subsequent continental rifting and are common hosts of economic rare-earth element (REE) deposits. Trace element modeling further indicates derivation of alkaline-silicate magmas from variably metasomatized, light REE-enriched arclogite. Our results suggest a geodynamic model in which subduction beneath thickened crust leads to arclogite formation, foundering, and metasomatism as the material descends through the subduction-influenced mantle. During this stage, partial melts sourced from arclogite are likely modified by subduction-related secondary processes which dilute their diagnostic geochemical signatures. Subsequent collision and orogenic collapse induce extensional stresses that facilitate asthenospheric upwelling, leading to partial melting of the arclogite-bearing mantle and efficient extraction of primitive arclogite melts to the surface to form alkaline-silicate complexes and associated REE deposits.

An analysis of the interaction between surface and basal crevasses in ice shelves

Abstract. The prescription of a simple and robust parameterization for calving is one of the most significant open problems in ice sheet modelling. One common approach to the modelling of crevasse propagation in calving in ice shelves is to view crevasse growth as an example of linear elastic fracture mechanics. Prior work has, however, focused on highly idealized crack geometries, with a single fracture incised into a parallel-sided slab of ice. In this paper, we study how fractures growing from opposite sides of such an ice slab interact with each other, focusing on different simple crack arrangements: we consider either perfectly aligned cracks or periodic arrays of laterally offset cracks. We visualize the dynamics of crack growth using simple tools from dynamical systems theory and find that aligned cracks tend to impede each other's growth due to the torques generated by normal stresses on the crack faces, while periodically offset cracks facilitate simultaneous growth of bottom and top cracks. For periodic cracks, the presence of multiple cracks on one side of the ice slab, however, also generates torques that slow crack growth, with widely spaced cracks favouring calving at lower extensional stresses than closely spaced cracks.

Multiphase growth and basin control of main faults on Northern sub-basin, Beibuwan basin, Northwestern South China sea

The basement-involved faults and multiphase extension control the three-dimensional (3-D) fault geometries and kinematics, producing different fault growth models in continental rift basins. In this paper, we apply qualitative and quantitative fault analysis techniques to 3D high-resolution seismic data from the Northern sub-basin of Beibuwan basin, building the tectonic-stratigraphic framework and proposing the evolutionary meachanisms of main normal faults. The results suggest that extensional stress changed from NW-SE direction during Paleocene-Middle Eocene to N-S direction in Late Eocene-Oligocene, leading to the ENE or E-W directed propagation of fault networks together with lateral and vertical linkage of fault segments. This includes three conceptual models: (1) F1 originated from propagation, interaction, linkage and failure of initial seven ENE-directed isolated faults, and grows following isolated fault growth model; (2) F2 nucleated as a normal fault before buried in Late Eocene, and reactivated as dextral strike-slip fault in Oligocene, therefore experienced vertical segmentation and linkage; (3) F3 activated as a long-term constant-length fault with generally increased displacement in Paleogene. Our study proposes that the T83 interface (the top of the second member of the Liushagang Formation) is a tectonic stress transition interface, while the T60 interface is both a tectonic inversion interface and a post-rift unconformity interface. Furthermore, the growth of extensional faults commonly accompanied single breached, transfer-fault breached or double breached relay ramps and fault-related folds, thereby exerting a significant influence on the basin architecture and sediment distribution.

Kinematic and dynamic fault slip analyses: Implications from the surface rupture of the 2023 Elbistan (Kahramanmaraş) (Mw7.6) earthquake, Türkiye

On 6 February 2023, the Elbistan (Kahramanmaraş) (Mw7.6) earthquake produced a strike-slip type coseismic surface rupture zone, involving the sinistral slip of the Doğanşehir Fault (DF) and Çardak Fault (ÇF). Fault slickenlines and seismic slickenlines were included in the inversion as part of the dynamic analysis. The inversion of fault slickenlines collected from nine outcrops along the surface rupture following the earthquake, many of which developed during the event and are referred to as coseismic slickenlines, reveals a strike-slip stress regime (σ2 = σv) characterized by a NE-SW (mean azimuth: N045°E) σ1 (maximum) axis. Relict slip planes adjacent to main slip surfaces were found to host slickenlines that appear much older than the most recent earthquake, referred to as paleoslip slickenlines. Inversion of the paleoslip slickenline collected from four outcrops reveals an extensional stress regime (σ1 = σv) characterized by a NE-SW σ3 (min) axis, consistent with previously published studies. To define a significant stress tensor concerning present-day faulting within the investigated area, the inversion method was applied to the seismic slickenlines of shallow earthquakes in the surface rupture area. The inversion of sixty selected nodal planes reveals a strike-slip stress regime (σ2 = σv) characterized by an NNE–SSW (N10°E) σ1 (max) axis. Besides, the moment tensor summation analysis using displacement vectors inferred from visible field markers offset during the earthquake was applied to the seismic slickenlines as part of the kinematic analysis. The shortening and extension results for the moment tensor summation are 044/36 and 307/11 indicating NE-SW compression. Results of the moment tensor summation (weighted by fault displacement) agree broadly with the inversion of seismic slickenlines results, indicating an NE orientation for shortening and an SE orientation for extension.

Tectonic Stress Analysis of Shivnath-Salena Area, Using Stress Response Structure

The geological mapping of the Shivnath-Salena area and structure analysis of the same area were conducted in the LesserHimalayan sequence, Far West Nepal, unveiling the characteristics of kinematics and the associated stress field in the region. Thearea comprises of the Salena Formation and Chachura Formation. The Salena Formation is sandwiched between the PachkoraThrust and Dudulakhan Thrust, and the Chachura Formation occurs between the North Dadeldhura Thrust and Pachkora Thrust.The Salena Formation is composed of light grey and white quartzite and black slates that are intensely deformed, with folds. The Malena Anticline and the Lamalek Syncline are the intraformational folds observed in the study area. Superimposed folding was also observed. The Chachura Formation comprises Paleocene to Late Eocene green sandstone, grey and purple shale, and approximately 1 m thick grey fossiliferous limestone. This study interprets stress-response structures to show the tectonic stress field in the Salena Formation. Twenty-seven fault slip data (slickenside) were collected in the field and used to determine the stress regime by applying the stress inversion technique. The direction of the maximum principal stress axes is interpreted as NE-SW. The average value of the stress index R' is about 0.30, indicating an extensional tectonic stress regime in the study area. As σ1 is vertical, R = R' in the study area suggests normal faulting in an extensional regime.

Slab steepening and rapid mantle wedge replacement during back-arc rifting in the New Hebrides

The effects of the composition and angle of the subducting slab and mantle wedge flow on tectonic and magmatic processes in island arcs and associated back-arcs are poorly understood. Here we analyse the ages and compositions of submarine lavas from the flanks and the floor of the back-arc Futuna Trough some 50 km east of Tanna Island in the New Hebrides arc front. Whereas >2.5 Ma-old back-arc lavas formed from an enriched mantle source strongly metasomatized by a slab component, the younger lavas show less slab input into a depleted mantle wedge. The input of the slab component decreased over the past 2.5 million years while the enriched mantle was replaced by depleted peridotite. The change of Futuna Trough lava compositions indicates rapid (10 s of km/million years) replacement of the mantle wedge by corner flow and slab steepening due to rollback, causing extensional stress and back-arc rifting in the past 2.5 million years.

Bioinspired Nanolayered Structure Tuned by Extensional Stress: A Scalable Way to High-Performance Biodegradable Polyesters.

The nacre-inspired multi-nanolayer structure offers a unique combination of advanced mechanical properties, such as strength and crack tolerance, making them highly versatile for various applications. Nevertheless, a significant challenge lies in the current fabrication methods, which is difficult to create a scalable manufacturing process with precise control of hierarchical structure. In this work, a novel strategy is presented to regulate nacre-like multi-nanolayer films with the balance mechanical properties of stiffness and toughness. By utilizing a co-continuous phase structure and an extensional stress field, the hierarchical nanolayers is successfully constructed with tunable sizes using a scalable processing technique. This strategic modification allows the robust phase to function as nacre-like platelets, while the soft phase acts as a ductile connection layer, resulting in exceptional comprehensive properties. The nanolayer-structured films demonstrate excellent isotropic properties, including a tensile strength of 113.5MPa in the machine direction and 106.3MPa in a transverse direction. More interestingly, these films unprecedentedly exhibit a remarkable puncture resistance at the same time, up to 324.8Nmm-1, surpassing the performance of other biodegradable films. The scalable fabrication strategy holds significant promise in designing advanced bioinspired materials for diverse applications.

Mapping paleostress trajectories by means of the clustering of reduced stress tensors determined from homogeneous and heterogeneous data sets

It is easy to draw stress trajectories to investigate the present stress field by interpolating stress orientations determined at control points. However, challenges arise when we deal with the trajectories of paleostresses, because neighboring control points may have the stress orientations of different tectonic phases. We must choose coeval stresses to draw the trajectories. Recent stress inversion techniques can separate stresses from heterogeneous data from fault, dilational fractures, etc. Natural data sets from those structures are often heterogeneous, and age data are usually not enough to classify the stresses by age. As a result, an unsupervised classification problem of the inversion results must be solved to draw the trajectories. Here, we propose a simple and heuristic procedure for this problem. We assume smooth trajectories during each of the phases. The smoothness makes density-based clustering adoptable to solve the problem. The heterogeneity of data sets allows the additional partition of the clusters. As a worked exercise for this technique, the trajectories of minimum horizontal stress orientations were drawn based on the paleostresses determined from the attitudes of felsic dikes and quartz veins formed in mid Cretaceous orogeny in the North Kitakami Terrain, northern Japan. The orogen-parallel and orogen-perpendicular extensional stress fields delineated by the present technique were probably the manifestations, respectively, of the gravitational collapse of the orogen and of regional extensional tectonics in the Far East.

Developing evolutionary models for deformation band formation in high-porosity suprasalt sandstones: An example from Paradox Basin, Utah

Pervasive deformation adjacent to salt diapirs can drive significant porosity and permeability reduction in potential reservoir units, yet predicting the intensity and spatial distribution of these subseismic-scale features has remained as a persistent challenge. Previously, Jurassic sandstones adjacent to salt-cored anticlines in the Paradox Basin, eastern Utah, have been used to characterize deformation banding formation. However, these host rocks have undergone significant structural and diagenetic modification following band formation, which adds significant complexity to analyses of this type. Here, we integrate detailed structural transect analysis, petrologic analysis of bands and host rocks, depth-compaction relationships, critical state deformation models, and regional burial evolution models to constrain the timing and conditions of band formation. This analysis demonstrates that bands in this region formed prior to pervasive cementation and are generally expressed as two plastic strain gradients; one characterized by distributed deformation bands across the crest of salt-cored anticlines and a second wherein deformation band density increases near mesoscale normal faults. Comparison of these results with numerical structural evolution models of similar structures indicates that band gradients may have formed as a result of outer-arc extensional stress induced by the rising diapir and are linked with normal faults. These results highlight that the integration of material behaviors with kinematic evolution can constrain models for deformation band formation and may provide a useful workflow for understanding the development of these features in geologically young petroleum systems like those of the Atlantic passive margin.

Complex Martinique Intermediate‐Depth Earthquake Reactivates Early Atlantic Break‐Up Structures

AbstractEarthquakes that rupture several faults occur frequently within the shallow lithosphere but are rarely observed for intermediate‐depth events (70–300 km). On 29 November 2007, the Mw7.4 Martinique earthquake struck the Lesser Antilles Island Arc near the deep end of the Wadati‐Benioff‐Zone. The sparse regional seismic network of 2007 previously hampered a detailed examination of this unusually complex event. Here, we combine seismic data from different studies with regional moment tensor inversion results and 3D full‐waveform modeling. We show that the earthquake is a doublet consisting of dip‐slip and strike‐slip motion along two oblique structures, both activated under extensional stress along the strike of the slab. Comparison with tectonic reconstructions suggests that the earthquake ruptured along a re‐activated ridge‐transform segment of the subducted Proto‐Caribbean spreading ridge. The unprecedented resolution of the source process highlights the influence of pre‐existing structures on localizing slab deformation also at intermediate‐depth.

From yield stress to elastic instabilities: Tuning the extensional behavior of elastoviscoplastic fluids.

In this study, we delve into the intricacies of elastoviscoplastic (EVP) fluids, particularly focusing on how polymer additives influence their extensional behavior. Our findings reveal that polymer additives significantly alter the extensional properties of the EVP fluids, such as relaxation time and extensional stresses while having negligible impact on the shear rheology. Interestingly, the modified fluids exhibit a transition from yield stress-like behavior to viscoelastic-like behavior under high extensional rates, ultimately leading to destabilization under extreme deformation. This research enhances the fundamental understanding of EVP fluids and highlights potential advancements in applications, especially in precision-demanding fields like 3D printing.

Tectonic activity in Gulf of Guinea and Sub-Sahara West Africa: A validation of Freeth (1977) using focal mechanism solutions

Fault plane solutions for a group of 104; 4.0 ≤ Mw ≤ 7.1 earthquakes between January 1979 and December 2016, extracted from the Global Centroid Moment Tensor Project catalog. Were used to investigate the regional tectonic stress regime of the Gulf of Guinea region. The idea is to validate the theory of membrane tectonics put forward by Freeth (1977)[1] in which the tectonic of the Gulf of Guinea and the sub-Sahara West Africa region were described based on Freeth (1977)[1]. The tectonic of the Gulf of Guinea and the sub-Sahara West Africa region are based on the movement of the African plate, we emphasized the use of rigorous statistical tests to decide on the quality and variability of the earthquake focal mechanisms (FMSs) utilized for the stress tensor inversion analysis. To constrain our analysis, we have applied both the Algorithm of Michael and Gauss technique in our stress tensor inversion analysis of FMS obtained from the region, and the results are found to be coherent and in good agreement with each other. Both Michael (1984)[2] and Zalohar and Vrabec (2007)[3] techniques show that the regional tectonic stress regime of the Gulf of Guinea and the sub-Sahara West Africa is extensional, which is in good agreement with the work of Freeth (1977)[1]. However, our investigation concluded that the orientation of the extensional stress regime is the same as the orientation of the movement of the African plate, which is towards the Euro-Asia plate.

Along-Strike Morphologic Variations of the Kyushu-Palau Ridge at 13°–17° N and Their Tectonic Implications

The paper provides a detailed description of the topographical distribution characteristics, along-strike morphologic variations, and tectonic implications of the Kyushu-Palau Ridge (KPR) in the 13°–17° N regions. The description is based on multibeam bathymetric data that was recently collected in the mid-southern segment of KPR and its surrounding areas. The findings indicate that the KPR in the studied region comprises several discontinuous seamounts and seamount chains. Along the ridge running from east to west, there is significant variation in the topography of the seafloor. Visible on this ridge are numerous deep-sea depressions and apparent topographical discontinuities. Geological tectonic processes such as plate subduction and seafloor spreading largely determine the topography of the seafloor. During the beginning of the Parece Vela Basin (PVB) spreading, the pre-existing volcanic arcs fractured under east-west extensional stress, resulting in the development of prominent seamounts, sharp ridges, relief alternations, and rift basins in the KPR. The east-west stress was subsequently transmitted to the weak and inactive mid-ocean ridge in the West Philippine Basin (WPB), which was reactivated and resulted in an episode of magma-poor spreading during 30–26 Ma. This episode caused the KPR to move eastward, stretched, and destroyed its pre-existing structure.