Extended Culture Periods Research Articles

The effect of surface morphology on endothelial and smooth muscle cells growth on blow-spun fibrous scaffolds

This study aimed to analyze the growth of two types of blood vessel building cells: endothelial cells (ECs) and smooth muscle cells (SMCs) on surfaces with different morphology. Two types of materials, differing in morphology, were produced by the solution blow spinning technique. One-layer materials consisted of one fibrous layer with two fibrous surfaces. Bi-layer materials consisted of one fibrous-solid layer and one fibrous layer, resulting in two different surfaces. Additionally, materials with different average fiber diameters (about 200, 500, and 900 nm) were produced for each group. It has been shown that it is possible to obtain structures with a given morphology by changing the selected process parameters (working distance and polymer solution concentration). Both morphology (solid versus fibrous) and average fiber diameter (submicron fibers versus microfibers) of scaffolds influenced the growth of ECs. However, this effect was only visible after an extended period of culture (6 days). In the case of SMCs, it was proved that the best growth of SMCs is obtained for micron fibers (with an average diameter close to 900 nm) compared to the submicron fibers (with an average diameter below 900 nm).

Preservation of T-Cell Stemness with a Novel Expansionless CAR-T Manufacturing Process, Which Reduces Manufacturing Time to Less Than Two Days, Drives Enhanced CAR-T Cell Efficacy

Preservation of T-Cell Stemness with a Novel Expansionless CAR-T Manufacturing Process, Which Reduces Manufacturing Time to Less Than Two Days, Drives Enhanced CAR-T Cell Efficacy

Affinity-bound growth factor within sulfated interpenetrating network bioinks for bioprinting cartilaginous tissues

3D bioprinting has emerged as a promising technology in the field of tissue engineering and regenerative medicine due to its ability to create anatomically complex tissue substitutes. However, it still remains challenging to develop bioactive bioinks that provide appropriate and permissive environments to instruct and guide the regenerative process in vitro and in vivo. In this study alginate sulfate, a sulfated glycosaminoglycan (sGAG) mimic, was used to functionalize an alginate-gelatin methacryloyl (GelMA) interpenetrating network (IPN) bioink to enable the bioprinting of cartilaginous tissues. The inclusion of alginate sulfate had a limited influence on the viscosity, shear-thinning and thixotropic properties of the IPN bioink, enabling high-fidelity bioprinting and supporting mesenchymal stem cell (MSC) viability post-printing. The stiffness of printed IPN constructs greatly exceeded that achieved by printing alginate or GelMA alone, while maintaining resilience and toughness. Furthermore, given the high affinity of alginate sulfate to heparin-binding growth factors, the sulfated IPN bioink supported the sustained release of transforming growth factor-β3 (TGF-β3), providing an environment that supported robust chondrogenesis in vitro, with little evidence of hypertrophy or mineralization over extended culture periods. Such bioprinted constructs also supported chondrogenesis in vivo, with the controlled release of TGF-β3 promoting significantly higher levels of cartilage-specific extracellular matrix deposition. Altogether, these results demonstrate the potential of bioprinting sulfated bioinks as part of a ‘single-stage’ or ‘point-of-care’ strategy for regenerating cartilaginous tissues. Statement of significanceThis study highlights the potential of using sulfated interpenetrating network (IPN) bioink to support the regeneration of phenotypically stable articular cartilage. Construction of interpenetrating networks in the bioink enables unique high-fidelity bioprinting and provides synergistic increases in mechanical properties. The presence of alginate sulfate enables the capacity of high affinity-binding of TGF-β3, which promoted robust chondrogenesis in vitro and in vivo.

Conformal single cell hydrogel coating with electrically induced tip streaming of an AC cone.

Encapsulation of single cells in a thin hydrogel provides a more precise control of stem cell niches and better molecular transport. Despite the recent advances in microfluidic technologies to allow encapsulation of single cells, existing methods rely on special crosslinking agents that are pre-coated on the cell surface and subject to the variation of the cell membrane, which limits their widespread adoption. This work reports a high-throughput single-cell encapsulation method based on the "tip streaming" mode of alternating current (AC) electrospray, with encapsulation efficiencies over 80% after tuned centrifugation. Dripping with multiple cells is curtailed due to gating by the sharp conic meniscus of the tip streaming mode that only allows one cell to be ejected at a time. Moreover, the method can be universally applied to both natural and synthetic hydrogels, as well as various cell types, including human multipotent mesenchymal stromal cells (hMSCs). Encapsulated hMSCs maintain good cell viability over an extended culture period and exhibit robust differentiation potential into osteoblasts and adipocytes. Collectively, electrically induced tip streaming enables high-throughput encapsulation of single cells with high efficiency and universality, which is applicable for various applications in cell therapy, pharmacokinetic studies, and regenerative medicine.

Establishing an Adult Mouse Brain Hippocampal Organotypic Slice Culture System that Allows for Tracing and Pharmacological Manipulation of ex vivo Neurogenesis.

The function of the hippocampus depends on the process of adult hippocampal neurogenesis which underpins the exceptional neural plasticity of this structure, and is also frequently affected in CNS pathologies. Thus, manipulation of this process represents an important therapeutic goal. To identify potential strategies, organotypic adult brain slices are emerging as a valuable tool. Over the recent years, this methodology has been refined and here we present a combined protocol that brings together these refinements to enable long-term culture of adult hippocampal slices. We employ a sectioning technique that retains essential afferent inputs onto the hippocampus as well as serum-free culture conditions, so allowing an extended culture period. To sustain the neurogenic potential in the slices, we utilize the gliogenesis-inhibitor Indomethacin. Using EdU retention analysis enables us to assess the effects of pharmacological intervention on neurogenesis. With these improvements, we have established an easy and reliable method to study the effects of small molecules/drugs on proliferation and neuron formation ex vivo which will facilitate future discovery driven drug screenings.

THER-03. IN VITRO EVALUATION OF THE EFFECT OF CANNABIDIOL ON PAEDIATRIC BRAIN TUMOUR CELL LINES USING A PULSED TREATMENT REGIME

Paediatric brain tumours are the second most common cancer after haematological malignancies. Intermittent dosing regimens are typical for chemotherapy drugs in order to avoid excessive damage to organs and avoid the onset of late effects. Cannabidiol (CBD) has been shown to have cytotoxic properties on paediatric brain tumour cell lines. Although CBD is far less toxic and damaging than the classical chemotherapy options which are currently available to children suffering with brain tumours, there are some possible side effects. Given that the half-life of the drug is 24 hours, it was important to establish the nature of the effect of cumulative dosing on top of the remaining drug in the system. The pHGG cell line, SF188 was cultured in different concentrations of CBD with either 1, 2 or 3 doses being given on consecutive days. 24 hours after the last dose the cells were analysed using the resazurin assay. It was observed that the amount of drug required for an EC50 to be obtained decreased; 17.6µM (1 dose), 8µM (2 doses), 5µM (3 doses) and that cell survival was reduced to nearly 0% in those cells which received multiple does of CBD at 17.6µM. In order to mimic the intermittent dosing regime, the cells were returned to the incubator for 4 days before the resazurin assay was repeated. The decrease in viability was maintained over the extended culture period meaning that the ability of even the apparent “healthy” cells to proliferate had been permanently affected.

CGG Repeat Expansion, and Elevated Fmr1 Transcription and Mitochondrial Copy Number in a New Fragile X PM Mouse Embryonic Stem Cell Model.

The Fragile-X related disorders (FXDs) are Repeat Expansion Diseases (REDs) that result from expansion of a CGG-repeat tract located at the 5′ end of the FMR1 gene. While expansion affects transmission risk and can also affect disease risk and severity, the underlying molecular mechanism responsible is unknown. Despite the fact that expanded alleles can be seen both in humans and mouse models in vivo, existing patient-derived cells do not show significant repeat expansions even after extended periods in culture. In order to develop a good tissue culture model for studying expansions we tested whether mouse embryonic stem cells (mESCs) carrying an expanded CGG repeat tract in the endogenous Fmr1 gene are permissive for expansion. We show here that these mESCs have a very high frequency of expansion that allows changes in the repeat number to be seen within a matter of days. CRISPR-Cas9 gene editing of these cells suggests that this may be due in part to the fact that non-homologous end-joining (NHEJ), which is able to protect against expansions in some cell types, is not effective in mESCs. CRISPR-Cas9 gene editing also shows that these expansions are MSH2-dependent, consistent with those seen in vivo. While comparable human Genome Wide Association (GWA) studies are not available for the FXDs, such studies have implicated MSH2 in expansion in other REDs. The shared unusual requirement for MSH2 for this type of microsatellite instability suggests that this new cell-based system is relevant for understanding the mechanism responsible for this peculiar type of mutation in humans. The high frequency of expansions and the ease of gene editing these cells should expedite the identification of factors that affect expansion risk. Additionally, we found that, as with cells from human premutation (PM) carriers, these cell lines have elevated mitochondrial copy numbers and Fmr1 hyperexpression, that we show here is O2-sensitive. Thus, this new stem cell model should facilitate studies of both repeat expansion and the consequences of expansion during early embryonic development.

Engineering anisotropic human stem cell-derived three-dimensional cardiac tissue on-a-chip

Despite significant efforts in the study of cardiovascular diseases (CVDs), they persist as the leading cause of mortality worldwide. Considerable research into human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) has highlighted their immense potential in the development of in vitro human cardiac tissues for broad mechanistic, therapeutic, and patient-specific disease modeling studies in the pursuit of CVD research. However, the relatively immature state of hPSC-CMs remains an obstacle in enhancing clinical relevance ofengineered cardiac tissue models. In this study, we describe development of a microfluidic platform for 3D modeling of cardiac tissues, derived from both rat cells and hPSC-CMs, to better recapitulate the native myocardium through co-culture with interstitial cells (specifically cardiac fibroblasts), biomimetic collagen hydrogel encapsulation, and induction of highly anisotropic tissue architecture. The presented platform is precisely engineered through incorporation of surface topography in the form of staggered microposts to enable long-term culture and maturation of cardiac cells, resulting in formation of physiologically relevant cardiac tissues with anisotropy that mimics native myocardium. After two weeks of culture, hPSC-derived cardiac tissues exhibited well-defined sarcomeric striations, highly synchronous contractions, and upregulation of several maturation genes, including HCN1, KCNQ1, CAV1.2, CAV3.1, PLN, and RYR2. These findings demonstrate the ability of the proposed engineered platform to mature animal- as well as human stem cell-derived cardiac tissues over an extended period of culture, providing a novel microfluidic chip with the capability for cardiac disease modeling and therapeutic testing.

Is This Rapid Destructive Hip Osteoarthritis ?

Rapid destructive hip osteoarthritis is a diagnosis by exclusion. It should be differentiated from septic arthritis, osteonecrosis, neuropathic arthritis and other aetiologies causing rapid bone resorption or destruction around the hip. The present study aims to review the incidence of rapid destructive hip osteoarthritis among those patients who request total hip arthroplasty for end stage arthrosis.A retrospective review of radiographs of all patients who scheduled for total hip arthroplasty from January 2010 to March 2019 were analysed by 3 orthopaedic fellows. Of 174 hips of 146 patients, 35 hips of 29 patients were considered by at least 2 orthopaedic fellows to have rapid destructive hip osteoarthritis based on radiographic criteria of rapid joint space narrowing or rapid destruction of femoral head with or without acetabular involvement. Clinical history and physical finding, blood biochemistry, cultures and pathology with or without frozen section are reviewed.Early total hip arthroplasty, rather than routine operation in the long waiting list, is recommended for rapid destructive hip osteoarthritis to prevent technical difficulty in dealing with the bone loss or defect associated with rapid destructive hip osteoarthritis. However, one must exclude septic arthritis before proceeding to total hip arthroplasty. In clinically highly suspected cases, staged total hip arthroplasty was done despite of normal initial blood investigationsand negative hip aspiration with equivocal frozen section on table. In one such patient, the culture was initially negative, but became positive only after extended period of culture. On the other hand, rapid destruction of acetabulum requiring impaction bone grafting and acetabular augmentation for total hip arthroplasty was needed in one patient. Malignancy was suspected in another patient, but there was no evidence of malignancy or infection in the femoral head and tissue obtained by excisional arthroplasty of hip. One patient with hip pain and bilateral hip involvement was found to have Charcot joint.Rapid destruction hip osteoarthritis represents an uncommon subset of arthrosis with rapid progression. A delicate balance between correct diagnosis and timely early operation should be exercised to prevent rapid loss of bone stock making delayed total hip arthroplasty become technical difficult with possible compromised outcomes.

Robotically handled whole-tissue culture system for the screening of oral drug formulations.

Monolayers of cancer-derived cell lines are widely used in the modelling of the gastrointestinal (GI) absorption of drugs and in oral drug development. However, they do not generally predict drug absorption in vivo. Here, we report a robotically handled system that uses large porcine GI tissue explants that are functionally maintained for an extended period in culture for the high-throughput interrogation (several thousand samples per day) of whole segments of the GI tract. The automated culture system provided higher predictability of drug absorption in the human GI tract than a Caco-2 Transwell system (Spearman's correlation coefficients of 0.906 and 0.302, respectively). By using the culture system to analyse the intestinal absorption of 2,930 formulations of the peptide drug oxytocin, we discovered an absorption enhancer that resulted in a 11.3-fold increase in the oral bioavailability of oxytocin in pigs in the absence of cellular disruption of the intestinal tissue. The robotically handled whole-tissue culture system should help advance the development of oral drug formulations and might also be useful for drug screening applications.

Insights from In Vivo Studies of Cellular Senescence.

Cellular senescence is the dynamic process of durable cell-cycle arrest. Senescent cells remain metabolically active and often acquire a distinctive bioactive secretory phenotype. Much of our molecular understanding in senescent cell biology comes from studies using mammalian cell lines exposed to stress or extended culture periods. While less well understood mechanistically, senescence in vivo is becoming appreciated for its numerous biological implications, both in the context of beneficial processes, such as development, tumor suppression, and wound healing, and in detrimental conditions, where senescent cell accumulation has been shown to contribute to aging and age-related diseases. Importantly, clearance of senescent cells, through either genetic or pharmacological means, has been shown to not only extend the healthspan of prematurely and naturally aged mice but also attenuate pathology in mouse models of chronic disease. These observations have prompted an investigation of how and why senescent cells accumulate with aging and have renewed exploration into the characteristics of cellular senescence in vivo. Here, we highlight our molecular understanding of the dynamics that lead to a cellular arrest and how various effectors may explain the consequences of senescence in tissues. Lastly, we discuss how exploitation of strategies to eliminate senescent cells or their effects may have clinical utility.

Cellular considerations for optimizing bone cell culture and remodeling in a lab-on-a-chip platform.

Our lab has developed a lab-on-a-chip platform for bone remodeling that enables long-term culturing of bone cells out to 7weeks and serves as a foundation toward a multicellular organ-on-a-chip system. Here, we optimized culturing protocols for osteoblasts, osteoclasts and osteocytes within the lab-on-a-chip and performed functional activity assays for quantifying bone formation and resorption. We analyzed cell seeding densities, feeding schedules and time in culture as a basis for optimizing culturing protocols. Further, we addressed concerns of sterility, cytotoxicity and leakage during the extended culture period within the polydimethylsiloxane chip. This system provides a method for quantifying the soluble effects of mechanically stimulated osteocytes on bone remodeling (formation/resorption).

Affinity-Bound Growth Factor within Sulfated Interpenetrate Network Bioinks for Bioprinting Cartilaginous Tissues

3D bioprinting has emerged as a promising technology in the field of tissue engineering and regenerative medicine due to its ability to create anatomically complex tissue substitutes. However, it still remains challenging to develop bioactive bioinks that provide appropriate and permissive environments to instruct and guide the regenerative process in vitro and in vivo. In this study alginate sulfate, a sulfated glycosaminoglycan (sGAG) mimic, was used to functionalize an alginate-gelatin methacryloyl (GelMA) interpenetrating network (IPN) bioink to enable the bioprinting of cartilaginous tissues. The inclusion of alginate sulfate had a limited influence on the viscosity, shear-thinning and thixotropic properties of the IPN bioink, enabling high-fidelity bioprinting and supporting mesenchymal stem cell (MSC) viability post-printing. The stiffness of printed IPN constructs greatly exceeded that achieved by printing alginate or GelMA alone, while maintaining resilience and toughness. Furthermore, given the high affinity of alginate sulfate to heparin-binding growth factors, the sulfated IPN bioink supported the sustained release of transforming growth factor-β3 (TGF-β3), providing an environment that supported robust chondrogenesis in vitro, with little evidence of hypertrophy or mineralization over extended culture periods. Such bioprinted constructs also supported chondrogenesis in vivo, with the controlled release of TGF-β3 promoting significantly higher levels of cartilage-specific extracellular matrix deposition. Altogether, these results demonstrate the potential of bioprinting sulfated bioinks as part of a ‘single-stage’ or ‘point-of-care’ strategy for regenerating cartilaginous tissues.

An in vitro model mimics the contact of biomaterials to blood components and the reaction of surrounding soft tissue

The therapeutic efficacy of a medical product after implantation depends strongly on the host-initiated fibrotic response (foreign body reaction). For novel biomaterials, it is of high relevance to understand this fibrotic process. As an alternative to in vivo studies, in vitro models mimic parts of the whole foreign body reaction. Aim of this study was to develop a wound model with key cells and matrix proteins in coculture. This approach combined blood components such as primary macrophages in a plasma-derived fibrin hydrogel, directly exposed to reference biomaterials (PTFE, glass, titanium). The soft tissue reaction is resembled by integrating fibroblasts in a collagen or a fibrin matrix. Those two experimental setups were conducted to show whether a long-term in vitro culture of 13 days is feasible. The response to reference biomaterials was assessed by multi-parametric analyses, comprising molecular profiling (cytokines, collagen I and ß-actin) and tissue remodeling (cell adherence, histological structure, tissue deposition). Polytetrafluorethylene (PTFE) and titanium were tested as references to correlate the in vitro evaluation to previous in vivo studies. Most striking, both model setups evaluated references’ fibrotic characteristics as previously reported by in vivo studies. Statement of SignificanceWe present a test platform applied for assessments on the foreign body reaction to biomaterials. This test system consists of blood components – macrophages and plasma-derived fibrin - as well as fibroblasts and collagen, generating a three-dimensional wound microenvironment. By this modular approach, we achieved a suitable test for long-term studies and overcame the limited short-term stability of whole blood tests. In contrast to previous models, macrophages’ viability is maintained during the extended culture period and excels the quality of the model. The potential to evaluate a foreign body reaction in vitro was demonstrated with defined reference materials. This model system might be of high potential as a screening platform to identify novel biomaterial candidates.

Application of patient-derived liver cancer cells for phenotypic characterization and therapeutic target identification.

Primary liver cancer (PLC) ranks among the most lethal solid cancers worldwide due to lack of effective biomarkers for early detection and limited treatment options in advanced stages. Development of primary culture models that closely recapitulate phenotypic and molecular diversities of PLC is urgently needed to improve the patient outcome. Long-term cultures of 7 primary liver cancer cell lines of hepatocellular and cholangiocellular origin were established using defined culture conditions. Morphological and histological characteristics of obtained cell lines and xenograft tumors were analyzed and compared to original tumors. Time course analyses of transcriptomic and genomic changes were performed using next-generation sequencing (NGS). Key oncogenic alterations were identified by targeted NGS and cell lines carrying potentially actionable mutations were treated with corresponding specific inhibitors. PDCL fully resembled morphological features of the primary cancers in vitro and in vivo over extended period in culture. Genomic alterations as well as transcriptome profiles showed high similarity with primary tumors and remained stable during long-term culturing. Targeted-NGS confirmed that key oncogenic mutations such as TP53, KRAS, CTNNB1 as well as actionable mutations (e.g. MET, cKIT, KDR) were highly conserved in PDCL and amenable for individualized therapeutic approaches. Integrative genomic and transcriptomic approaches further demonstrated that PDCL more closely resemble molecular and prognostic features of PLC than established cell lines and are valuable tool for direct target evaluation. Our integrative analysis demonstrates that PDCL represents refined model for discovery of relevant molecular subgroups and exploration of precision medicine approaches for the treatment of this deadly disease.

Distortion of protein analysis in primary neuronal cultures by serum albumin from culture medium: A methodological approach to improve target protein quantification

BackgroundPrimary neuronal cultures underpin diverse neuroscience experiments, including various protein analysis techniques, such as Western blotting, whereby protein extraction from cultured neurons is required. During immunoblotting experiments, we encountered problems due to a highly-abundant protein of 65–70 KDa present in the cell extracts, that interfered with total protein estimation, and immunodetection of target proteins of similar size. Previous research has suggested that serum proteins, specifically albumin, contained within commonly-used culture media, can bind to, or be adsorbed by, generic cell culture plasticware. This residual albumin may then be extracted along with cell proteins. New methodWe made simple modifications to wash steps of traditional cell lysis/extraction protocols. ResultsWe report that a substantial amount of albumin, accumulated from the standard culture media, is extracted from primary neuronal cultures along with the cellular contents. This contamination can be reduced, without changing the culture conditions, by modifying wash procedures. Comparison with existing methodsAccumulated albumin from neuronal culture media, in amounts equivalent to cellular contents, can distort data from total protein assays and from the immunoreactive signal from nearby bands on Western blots. By altering wash protocols during protein extraction, these problems can be ameliorated. ConclusionsWe suggest that the standard extended culture periods for primary neuronal cultures, coupled with the requirement for successive medium changes, may leave them particularly susceptible to cumulative albumin contamination from the culture media used. Finally, we propose the implementation of simple alterations to wash steps in protein extraction protocols which can ameliorate this interference.

Promotive Effect of Zinc Ions on the Vitality, Migration, and Osteogenic Differentiation of Human Dental Pulp Cells.

Zinc is an essential trace element for proper cellular function and bone formation. However, its exact role in the osteogenic differentiation of human dental pulp cells (hDPCs) has not been fully clarified before. Here, we speculated that zinc may be effective to regulate their growth and osteogenic differentiation properties. To test this hypothesis, different concentrations (1×10-5, 4×10-5, and 8×10-5M) of zinc ions (Zn2+) were added to the basic growth culture medium and osteogenic inductive medium. Cell viability and migration were measured by cell counting kit-8 (CCK-8) and transwell migration assay in the basic growth culture medium, respectively. The reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was used to detect the gene expression levels of selective osteogenic differentiation markers and zinc transporters. Alkaline phosphatase (ALP) activity analysis and alizarin red S staining were used to investigate the mineralization of hDPCs. Exposure of hDPCs to Zn2+ stimulated their viability and migration capacity in a dose- and time-dependent manner. RT-qPCR assay revealed elevated expression levels of osteogenic differentiation-related genes and zinc transporters genes in various degrees. ALP activity was also increased with elevated Zn2+ concentrations and extended culture periods, but enhanced matrix nodules formation were observed only in 4×10-5 and 8×10-5M Zn2+ groups. These findings suggest that specific concentrations of Zn2+ could potentiate the vitality, migration, and osteogenic differentiation of hDPCs. We may combine optimum zinc element into pulp capping materials to improve their biological performance.

Transgene-free human induced pluripotent stem cell line (HS5-SV.hiPS) generated from cesarean scar-derived fibroblasts

Transgene-free human HS5-SV.hiPS line was generated from human cesarean scar-derived fibroblasts using temperature-sensitive Sendai virus vectors carrying Oct4, Sox2, cMyc and Klf4 exogenous transcriptional factors. The viral constructs were eliminated from HS5-SV.hiPS line through heat treatment. Transgene-free HS5-SV.hiPS cells expressed pluripotent associated transcription factors Oct4, Nanog, Sox2, Rex1 and surface markers SSEA-4, TRA-1-60 and OCT4. HS5-SV.hiPS cells formed embryoid bodies and differentiated into three embryonic germ layers in vivo. HS5-SV.hiPS cells maintained their normal karyotype (46, XX) after culture for extended period. HS5-SV.hiPS displayed the similar pattern of DNA fingerprinting to the parenteral scar-derived fibroblasts.

Lipid analysis of developing Camelina sativa seeds and cultured embryos

Camelina sativa is a cultivated oilseed rich in triacylglycerols containing oleic, linoleic, α-linolenic and eicosenoic acids. As it holds promise as a model species, its lipid synthesis was characterized in vivo and in culture. Lipid accumulates at a maximum rate of about 26μg/day/seed (11.5mglipid/day/g fresh seed weight), a rate comparable with other oilseeds. Noteworthy is a late stage surge in α-linolenic acid accumulation. Small amounts of unusual epoxy and hydroxy fatty acids are also present in the triacylglycerols. These include 15,16-epoxy- and 15-hydroxy-octadecadienoic acids and homologous series of ω7-hydroxy-alk-ω9-enoic and ω9/10-hydroxy-alkanoic acids. Mid-maturation embryos cultured in vitro have growth and lipid deposition rates and fatty acid compositions that closely match that of seeds, but extended culture periods allow these rates to rise and surpass those observed in planta. Optimized thin layer chromatography systems for characterization of labeled products from acetate or glycerol labeling are described. Glycerol label is only found in acylglycerols, largely as the intact glyceryl backbone, but acetate can label acyl groups and sterols, the latter to a much higher relative specific activity. This presumably occurs because mevalonic acid precursor is derived from the non-plastid pool of acetyl-CoA that is also the source for malonyl-CoA to drive FAE1-dependent chain elongation. Particular attention has been paid to the separation of sterols and diacylglycerols, and to hydrogenation of triacylglycerols to simplify their analysis. These improved methods will allow more accurate analyses of the fluxes of lipid metabolism in cultured plant embryos.

Production, Characterization and Potential Uses of a 3D Tissue-engineered Human Esophageal Mucosal Model.

The incidence of both esophageal adenocarcinoma and its precursor, Barrett's Metaplasia, are rising rapidly in the western world. Furthermore esophageal adenocarcinoma generally has a poor prognosis, with little improvement in survival rates in recent years. These are difficult conditions to study and there has been a lack of suitable experimental platforms to investigate disorders of the esophageal mucosa. A model of the human esophageal mucosa has been developed in the MacNeil laboratory which, unlike conventional 2D cell culture systems, recapitulates the cell-cell and cell-matrix interactions present in vivo and produces a mature, stratified epithelium similar to that of the normal human esophagus. Briefly, the model utilizes non-transformed normal primary human esophageal fibroblasts and epithelial cells grown within a porcine-derived acellular esophageal scaffold. Immunohistochemical characterization of this model by CK4, CK14, Ki67 and involucrin staining demonstrates appropriate recapitulation of the histology of the normal human esophageal mucosa. This model provides a robust, biologically relevant experimental model of the human esophageal mucosa. It can easily be manipulated to investigate a number of research questions including the effectiveness of pharmacological agents and the impact of exposure to environmental factors such as alcohol, toxins, high temperature or gastro-esophageal refluxate components. The model also facilitates extended culture periods not achievable with conventional 2D cell culture, enabling, inter alia, the study of the impact of repeated exposure of a mature epithelium to the agent of interest for up to 20 days. Furthermore, a variety of cell lines, such as those derived from esophageal tumors or Barrett's Metaplasia, can be incorporated into the model to investigate processes such as tumor invasion and drug responsiveness in a more biologically relevant environment.