Osteogenesis-related Gene Expression Research Articles

Cebpb Regulates Skeletal Stem Cell Osteogenic Differentiation and Fracture Healing via the WNT/β-Catenin Pathway.

Fracture is the most common traumatic organ injury, and fracture nonunion is a critical clinical challenge. The research on the mechanisms of skeletal stem cell (SSC) differentiation and fracture healing may help develop new treatment strategies and improve the prognosis of patients at high risk of nonunion. Bioinformatic analysis of scRNA-seq data of mouse SSCs and mouse osteoprogenitors was applied to discover major transcription factors for the regulation of SSC differentiation. FACS was used to isolate SSCs prospectively. The expression of Cebpb, osteogenesis-related genes (Runx2, Sp7, and Bglap2), and markers for Notch, Hedgehog, MAPK, BMP2/SMAD, and WNT/β-catenin signaling pathways (Hes1, Gli1, p-Erk1/2, p-Smad1/5/9, and β-catenin) were detected in SSCs with qPCR or western blot, respectively. Alkaline phosphatase assay and alizarin red S staining were used to illustrate the osteogenic differentiation ability of SSCs in vitro. A WNT inhibitor, IWR-1, was further used to explore the mechanism of WNT signaling in the differentiation of SSCs. Micro-CT, mechanical testing, and immunohistochemistry of osteogenic and chondrogenic proteins (Sp7 and Col2α1) were used to demonstrate the capacity of Cebpb knockdown in promoting fracture healing in a monocortical defect model. We found that Cebpb was the crucial transcription factor regulating SSC differentiation. Inhibiting Cebpb in SSCs enhanced the expression of active β-catenin to promote the expression of WNT target genes, thus facilitating the osteogenic differentiation of SSCs. Bone mass, mechanical properties, and osteogenic protein expression were also increased in the Cebpb inhibition group compared to the group without Cebpb inhibition. Collectively, our results proved that Cebpb knockdown promotes SSC osteogenic differentiation and fracture healing via the WNT/β-catenin signaling pathway.

Polycrystalline particulates synthesized on zirconia for enhanced bioactivity: An in vitro study.

Zirconia is a promising material for dental implant with its excellent biocompatibility, good mechanical properties, and esthetic effect similar to natural teeth. To improve the bioactivity and osteogenic properties of zirconia, pre-sintered zirconia discs were divided into C, T3 , T5 , and T7 group. Group C was as control. T3 , T5 , and T7 groups were soaked in hydrofluoric acid (HF) for 30, 50, and 70 s, respectively. Then, they were placed into CaCl2 solution and heated in NaOH solution. After sintering, the samples were characterized by scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction, which confirmed the ZrO2 polycrystalline particulates in situ synthesized on the treated sample discs. The surface roughness of the treated samples was increased with the prolonged of acid treatment time (p < .05), while the three-point bending strength did not decrease significantly (p > .05). MC3T3-E1 cells were cultured on zirconia discs to evaluate the bioactivity and osteogenic effect of modified zirconia. The living&dead fluorescence staining and CCK-8 assay showed that the specimens were non-toxic and significantly promoted cell proliferation. In addition, the cell proliferation was enhanced with the increase of zirconia surface roughness. Polycrystalline particles modified zirconia were beneficial to cell spreading. After osteogenic induction, MC3T3-E1 cells inoculated on modified zirconia exhibited higher alkaline phosphatase activity, mineralization activity and up-regulated osteogenesis-related gene expression. Above all, in situ synthesized polycrystalline particulates significantly improve the biological activity of zirconia, which will promote the widespread application of zirconia implants.

Inactivation of Ihh in Sp7-Expressing Cells Inhibits Osteoblast Proliferation, Differentiation, and Bone Formation, Resulting in a Dwarfism Phenotype with Severe Skeletal Dysplasia in Mice.

Indian hedgehog (Ihh) is an indispensable paracrine factor for proper tissue patterning, skeletogenesis, and cellular proliferation. Recent genetic studies have revealed critical roles of chondrocyte-derived Ihh in regulating chondrocyte proliferation, hypertrophy and cartilage ossification. However, the functions of Sp7-expressing cell-derived Ihh in osteoblast differentiation and bone formation remain unclear. Sp7 is an essential transcription factor for osteoblast differentiation. In the current study, we generated Sp7-iCre; Ihhfl/fl mice, in which the Ihh gene was specifically deleted in Sp7-expressing cells to investigate the roles of Ihh. Ihh ablation in Sp7-expressing cells resulted in a dwarfism phenotype with severe skeletal dysplasia and lethality at birth, but with normal joint segmentation. Sp7-iCre; Ihhfl/fl mice had fewer osteoblasts, almost no cortical and trabecular bones, smaller skulls, and wider cranial sutures. Additionally, the levels of osteogenesis- and angiogenesis-related genes, and of major bone matrix protein genes were significantly reduced. These results demonstrated that Ihh regulates bone formation in Sp7-expressing cells. Ihh deficiency in primary osteoblasts cultured in vitro inhibited their proliferation, differentiation, and mineralization ability, and reduced the expression of osteogenesis-related genes. Moreover, the deletion of Ihh also attenuated the Bmp2/Smad/Runx2 pathway in E18.5 tibial and primary osteoblasts. The activity of primary osteoblasts in mutant mice was rescued after treatment with rhBMP2. In summary, our data revealed that Ihh in Sp7-expressing cells plays an indispensable role in osteoblast differentiation, mineralization, and embryonic osteogenesis, further implicated that its pro-osteogenic role may be mediated through the canonical Bmp2/Smad/Runx2 pathway.

Biological evaluation of polydopamine and chitosan composite coatings on the 3D printed porous biphasic calcium phosphate scaffold

A current, gradually growing trend is to use bioactive ceramics to develop new bone scaffolds to replace traditional bone implants. Biphasic calcium phosphate (BCP), a mixed material of hydroxyapatite and tricalcium phosphate, has limited osseointegration ability. Therefore, improving the bioactivity and osteoinductive ability of BCP scaffolds through various surface modification methods is an important issue. Polydopamine (PDA) coating, chitosan (CS) coating, and their composite coatings have been previously reported to individually possess a good ability to improve scaffold bioactivity, but few comparisons between them and the optimal coating sequence of PDA and CS have been reported. Herein, we fabricated a BCP scaffold by using a self-made 3D printer, sintered the scaffold, and then prepared PDA, CS, PDA/CS and CS/PDA coatings by solution immersion. Afterwards, the surface morphology, element composition and proportion, compressive strength and surface contact angle of the five groups of scaffolds were characterized. Finally, the adhesion, proliferation and osteogenesis-related gene expression levels of MC3T3-E1 on the five groups in vitro were evaluated in detail. The results showed that the five types of scaffolds were fabricated successfully and that the PDA/CS and CS/PDA coatings had different surface morphologies. The compressive strengths of the composite-coating groups were higher than those of the single-coating groups and the BCP group. The CCK-8 experiment revealed that the composite coatings can promote the initial adhesion and proliferation of cells. The detection results of three osteogenesis-related genes (OCN, COL-1 and Runx-2) proved that the composite coatings had a synergistic effect in promoting osteodifferentiation and that the CS/PDA coating had the greatest effect in improving cell viability and promoting osteogenic differentiation.

Preparation of a nanopearl powder/C-HA (chitosan-hyaluronic acid)/rhBMP-2 (recombinant human bone morphogenetic protein-2) composite artificial bone material and a preliminary study of its effects on MC3T3-E1 cells

ABSTRACT A nanopearl powder/C-HA (chitosan-hyaluronic acid)/rhBMP-2 (recombinant human bone morphogenetic protein-2) composite artificial bone material was prepared, and its biological properties were evaluated. The nanopearl powder/C-HA/rhBMP-2 composite porous artificial bone material was prepared using the freeze-drying method after the nanopearl powder was prepared using mechanical ball milling. The particle was measured with a transmission electron microscope, its surface morphology and pore size were observed under a scanning electron microscope. The porosity of the artificial bone was determined using pycnometry, a compression performance test was conducted with a universal testing machine, and XRD (X-ray diffraction) patterns were recorded to examine the crystal form of the pearl powder in the composite artificial bone. Finally, the artificial bone was cocultured with mouse MC3T3-E1 cells to investigate its effects on cell proliferation and differentiation and the expression of osteogenesis-related genes. The pearl powder prepared in this experiment had a particle size in the nanometer range. This nanopearl powder, along with C-HA and rhBMP-2, was compounded into the nanopearl powder/C-HA/rhBMP-2 composite artificial bone, showing pore sizes of 188.53 ± 15.32 μm, a porosity of 86.43 ± 2.78% and a compressive strength of 0.342 ± 0.024 MPa. Notably, rhBMP-2 was released from the artificial bone in a sustained manner. Moreover, this artificial bone promoted the adhesion, proliferation, and differentiation of MC3T3-E1 cells and upregulated the expression of ColαI (collagen α1), OCN (osteocalcin), OPN (osteopontin) and Runx2 (runt-related gene 2). Conclusively, this nanopearl powder/C-HA/rhBMP-2 composite artificial bone material showed good performance and cytocompatibility, suggesting that it can be used for bone tissue engineering.

Low-intensity pulsed ultrasound enhances immunomodulation and facilitates osteogenesis of human periodontal ligament stem cells by inhibiting the NF-κB pathway.

Human periodontal ligament stem cells (hPDLSCs) are vital in cellular regeneration and tissue repair due to their multilineage differentiation potential. Low intensity pulsed ultrasound (LIPUS) has been applied for treating bone and cartilage defects. This study explored the role of LIPUS in the immunomodulation and osteogenesis of hPDLSCs. hPDLSCs were cultured in vitro, and the effect of different intensities of LIPUS (30, 60, and 90 mW/cm2) on hPDLSC viability was measured. hPDLSCs irradiated by LIPUS and stimulated by lipopolysaccharide (LPS) and LIPUS (90 mW/cm2) were co-cultured with peripheral blood mononuclear cells (PBMCs). Levels of immunomodulatory factors in hPDLSCs and inflammatory factors in PBMCs were estimated, along with determination of osteogenesis-related gene expression in LIPUS-irradiated hPDLSCs. The mineralized nodules and alkaline phosphatase (ALP) activity of hPDLSCs and levels of IκBα, p-IκBα, and p65 subunits of NF-κB were determined. hPDLSC viability was increased as LIPUS intensity increased. Immunomodulatory factors were elevated in LIPUS-irradiated hPDLSCs, and inflammatory factors were reduced in PBMCs. Osteogenesis-related genes, mineralized nodules, and ALP activity were promoted in LIPUS-irradiated hPDLSCs. The cytoplasm of hPDLSCs showed increased IκBα and p65 and decreased p-IκBα at increased LIPUS intensity. After LPS and LIPUS treatment, the inhibitory effect of LIPUS irradiation on the NF-κB pathway was partially reversed, and the immunoregulation and osteogenic differentiation of hPDLSCs were decreased. LIPUS irradiation enhanced immunomodulation and osteogenic differentiation abilities of hPDLSCs by inhibiting the NF-κB pathway, and the effect is dose-dependent. This study may offer novel insights relevant to periodontal tissue engineering.Graphical

Super-Enhancer-Associated Long Non-Coding RNA LINC01485 Promotes Osteogenic Differentiation of Human Bone Marrow Mesenchymal Stem Cells by Regulating MiR-619-5p/RUNX2 Axis

ObjectiveTo investigate the mechanisms of super-enhancer-associated LINC01485/miR-619-5p/RUNX2 signaling axis involvement in osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs).MethodsOsteogenic differentiation of hBMSCs was induced in vitro. The expression levels of LINC01485 and miR-619-5p during osteogenesis were measured using quantitative real-time polymerase chain reaction (qRT-PCR). Osteogenic differentiation was examined by qRT-PCR, western blot, alkaline phosphatase (ALP) staining, ALP activity measurement, and Alizarin Red S (ARS) staining assays. Thereafter, the effects of LINC01485 and miR-619-5p on osteogenic differentiation of hBMSCs were evaluated by performing loss- and gain-of-function experiments. Subsequently, a fluorescence in situ hybridization (FISH) assay was employed to determine the cellular localization of LINC01485. Bioinformatics analysis, RNA antisense purification (RAP) assay, and dual-luciferase reporter assays were conducted to analyze the interactions of LINC01485, miR-619-5p, and RUNX2. Rescue experiments were performed to further delineate the role of the competitive endogenous RNA (ceRNA) signaling axis consisting of LINC01485/miR-619-5p/RUNX2 in osteogenic differentiation of hBMSCs.ResultsThe expression of LINC01485 was up-regulated during osteogenic differentiation of hBMSCs. The overexpression of LINC01485 promoted osteogenic differentiation of hBMSCs by up-regulating the expression of osteogenesis-related genes [e.g., runt-related transcription factor 2 (RUNX2), osterix (OSX), collagen type 1 alpha 1 (COL1A1), osteocalcin (OCN), and osteopontin (OPN)], and increasing the activity of ALP. ALP staining and ARS staining were also found to be increased upon overexpression of LINC01485. The opposing results were obtained upon LINC01485 interference in hBMSCs. miR-619-5p was found to inhibit osteogenic differentiation. FISH assay displayed that LINC01485 was mainly localized in the cytoplasm. RAP assay results showed that LINC01485 bound to miR-619-5p, and dual-luciferase reporter assay verified that LINC01485 bound to miR-619-5p, while miR-619-5p and RUNX2 bound to each other. Rescue experiments illustrated that LINC01485 could promote osteogenesis by increasing RUNX2 expression by sponging miR-619-5p.ConclusionLINC01485 could influence RUNX2 expression by acting as a ceRNA of miR-619-5p, thereby promoting osteogenic differentiation of hBMSCs. The LINC01485/miR-619-5p/RUNX2 axis might comprise a novel target in the bone tissue engineering field.

Fabrication and evaluation of bone morphogenetic protein-2 microspheres coated black phosphorus nanosheets@polylactic-glycolic acid copolymers scaffold: A multifunctional antibacterial photothermal scaffold for bone regeneration

Clinical bone defects are often caused by high energy injury and are easily complicated by bacterial infection. An ideal bone repair material should promote bone regeneration and prevent bacterial infection. In this study, a multifunctional photothermal scaffold was developed: bone morphogenetic protein-2 (BMP-2)/polylactic-glycolic acid copolymers (PLGA) microspheres were prepared by a double emulsion method and then coated on the scaffolds prepared using a mixture of black phosphorus nanosheets (BPs) and PLGA, to form BMP-2@BPs scaffolds. The structural and photothermal properties of the composite scaffolds were characterized. The BMP-2@BPs scaffolds demonstrated good biocompatibility in both in vitro and in vivo experiments. The BMP-2@BPs scaffolds promoted osteogenic differentiation through a combination of BMP-2 release and upregulation of the expression of heat shock proteins by the radiation of near-infrared (NIR) light, which further upregulated the expression of osteogenesis-related genes. In addition, BPs demonstrated antibacterial effects under the mediation of NIR, which is beneficial for the prevention of clinical bacterial infections. In summary, the BMP-2@BPs scaffold was a multifunctional photothermal scaffold that could accelerate bone regeneration and act against bacteria. This study provides a new perspective for the treatment of bone defects and infectious bone defects.

Decellularized Periosteum-Derived Hydrogels Promote the Proliferation, Migration and Osteogenic Differentiation of Human Umbilical Cord Mesenchymal Stem Cells.

Human umbilical cord mesenchymal stem cells (hUCMSCs) are promising for bone tissue engineering, which have a non-invasive harvesting process, high cell yield, favorable proliferation capacity, and low immunogenicity. However, the osteogenic efficacy of hUCMSCs is relatively lower than that of bone marrow mesenchymal stem cells (BMSCs). Hydrogels from decellularized extracellular matrix (dECM) preserve the biological compositions and functions of natural ECM, which can provide tissue-specific cues to regulate phenotypic expression and cell fate. It is unknown, however, whether hydrogels from periosteum can serve as pro-osteogenic carriers of hUCMSCs. Herein, a decellularized periosteum-derived hydrogel (dPH) was fabricated to reveal the effects of periosteum-specific cues on the bioactivities of hUCMSCs. A widely used non-bone/periosteum-derived ECM hydrogel product, Matrigel, was used as the control group. After decellularization, the absence of nuclei in the histological analysis indicated a successful removal of cellular components, which was also confirmed by DNA content quantification. The storage modulus of dPH increased (from 164.49 ± 29.92 Pa to 855.20 ± 20.67 Pa) with increasing concentration (from 0.5% to 1%). With a highly porous, fibrous microstructure, dPH had a more hydrophilic surface than Matrigel, of which the water contact angle reduced 62.62 ± 0.04%. Furthermore, dPH prominently promoted the initial cellular spreading with a significantly higher cell surface area (1.47-fold), cell spreading length (1.45-fold) and proliferation (approximately 1.05–1.13-fold) of hUCMSCs than those of Matrigel. Additionally, dPH was conducive to cell migration, whereas no cells migrated to Matrigel in the Transwell model. Compared with those of the Matrigel group, the osteogenesis-related genes expression levels (runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), osteopontin (OPN), and osteocalcin (OCN)) and mineralized matrix formation (9.74-fold) of the hUCMSCs significantly increased in the dPH group. Our study indicated that dPH could provide a pro-osteogenic microenvironment for hUCMSCs, thereby revealing a promising application potential to repair bone defects.

Novel Soy Peptide CBP: Stimulation of Osteoblast Differentiation via TβRI-p38-MAPK-Depending RUNX2 Activation.

DEDEQIPSHPPR, the calcium-binding peptide (CBP) identified in soy yogurt, was proven to be a potential cofactor in osteoporosis prevention in our previous study, but the mechanism was unknown. In this study, the activity of alkaline phosphatase (ALP) and osteocalcin (OCN), the regulation of RUNX2, and the expression of TβRI were investigated to elucidate the underlying mechanism. The results show that CBP upregulated ALP activity and OCN concentration and increased the expression of RUNX2 and the activation of the MAPK signaling pathway. Similarly, the expression of osteogenesis-related genes in osteoblasts also increased upon CBP treatment. Moreover, the CBP-induced enhancement of ALP activity and phosphorylation levels in the p38 pathway was inhibited by treatment with a p38 inhibitor (SB203538) and TβRI inhibitor (SB431542), respectively, suggesting that p38 and TβRI were involved in the osteogenic action. Based on the signaling pathways, the intracellular calcium concentration was significantly elevated by CBP, which was correlated with the increased behavioral functions and the relative fluorescence intensity of the bone mass. These findings suggest that CBP stimulates osteoblast differentiation and bone mineralization through the activation of RUNX2 via mechanisms related to the TβRI-p38-MAPK signaling pathways, further highlighting CBP’s important potential for treating osteoporosis.

UiO-66 metal-organic framework as a double actor in chitosan scaffolds: Antibiotic carrier and osteogenesis promoter.

Metal-organic frameworks (MOFs) have recently emerged as a useful class of nanostructures with well-suited characteristics for drug delivery applications, due to the high surface area and pore size for efficient loading. Despite their use as a nano-carrier for controlled delivery of various types of drugs, the inherent osteo-conductive properties have stolen a great attention as a growing area of investigation. Here, we evaluated the double function of UiO-66 MOF structure as a carrier for fosfomycin antibiotic and also as an osteogenic differentiation promoter when introduced in 3D chitosan scaffolds, for the first time. Our results revealed that the wet-spun chitosan scaffolds containing fosfomycin loaded UiO-66 nanocrystals (CHI/UiO-66/FOS) possessed fiber mesh structure with integrated micro-scale fibers and increased mechanical strength. In vitro antibacterial studies indicated that CHI/UiO-66/FOS scaffolds showed bactericidal activity against Staphylococcus aureus. Moreover, the scaffolds were biocompatible to MC3T3-E1 pre-osteoblasts and significantly up-regulated the expression of osteogenesis-related genes and facilitated the extracellular matrix mineralization, in vitro. Taken together, our results demonstrate UiO-66 MOFs can present double functionality and CHI/UiO-66/FOS scaffolds hold a significant potential to be further explored as an alternative approach in treating infected bone defects like osteomyelitis.

3D bioprinted GelMA/GO composite induces osteoblastic differentiation.

Graft substitute is a mature treatment tool in craniofacial bone repair. However, stress shielding and immutability of structure limit its use in patients with congenital defects. Therefore, a regenerative graft would be best suited for repair. Mesenchymal stem cells (MSCs) have been shown to be feasible in regenerative medicine and the clinical treatment of bone repair. The aim of this study was to propose a strategy that would directly blend graphene oxide (GO) and MSCs with gelatin methacrylate anhydride (GelMA), as bioink, to generate the scaffold for bone regenerative repair. The survival and osteogenic capacity of MSCs in the composite bioink were assessed by cell viability and proliferation assays, along with expression analysis of osteogenesis-related genes and proteins, and targeted immunofluorescence. The introduction of GO to the printing process had no influence on cell printing, viability, or printability of GelMa. However, the GO-involved structure exhibited a positive influence on MSC proliferation, without significantly affecting cell viability. Alkaline phosphatase was expressed more in cells cultured with GO than in those with pure GelMA. In addition, GO promoted the expression of osteogenesis-related genes and proteins, such as osteopontin, osteocalcin, and RUNX2. Collectively, the composite bioink enhanced cell proliferation and adhesion, as well as osteogenic differentiation properties, compared with pure GelMA.

Sphingosine-1-phosphate hinders the osteogenic differentiation of dental pulp stem cells in association with AKT signaling pathways

Sphingosine-1-phosphate (S1P) is an important lipid mediator that regulates a diverse range of intracellular cell signaling pathways that are relevant to tissue engineering and regenerative medicine. However, the precise function of S1P in dental pulp stem cells (DPSCs) and its osteogenic differentiation remains unclear. We here investigated the function of S1P/S1P receptor (S1PR)-mediated cellular signaling in the osteogenic differentiation of DPSCs and clarified the fundamental signaling pathway. Our results showed that S1P-treated DPSCs exhibited a low rate of differentiation toward the osteogenic phenotype in association with a marked reduction in osteogenesis-related gene expression and AKT activation. Of note, both S1PR1/S1PR3 and S1PR2 agonists significantly downregulated the expression of osteogenic genes and suppressed AKT activation, resulting in an attenuated osteogenic capacity of DPSCs. Most importantly, an AKT activator completely abrogated the S1P-mediated downregulation of osteoblastic markers and partially prevented S1P-mediated attenuation effects during osteogenesis. Intriguingly, the pro-inflammatory TNF-α cytokine promoted the infiltration of macrophages toward DPSCs and induced S1P production in both DPSCs and macrophages. Our findings indicate that the elevation of S1P under inflammatory conditions suppresses the osteogenic capacity of the DPSCs responsible for regenerative endodontics.

Beta-tricalcium phosphate enhanced mechanical and biological properties of 3D-printed polyhydroxyalkanoates scaffold for bone tissue engineering

Polyhydroxyalkanoates (PHA) is a naturally degradable polyester with good biocompatibility. However, several disadvantages including poor bioactivity and mechanical properties limit the biomedical application of PHA. To circumvent these drawbacks, PHA needs to be blended with other materials to improve performance. Beta-tricalcium phosphate (β-TCP) has emerged as one of the most promising bone repair materials due to its good biocompatibility, satisfactory mechanical properties, and excellent bone osteoconductivity. In this study, PHA filled with β-TCP in 0 wt%, 5 wt%, 10 wt%, 20 wt%, and 30 wt% of concentrations were produced using a twin-screw extruder. The extruded 3D filaments made with 20% β-TCP exhibited the maximum mechanical properties to manufacture 3D scaffolds for bone tissue engineering. We then prepared the 3D-printed PHA/β-TCP scaffolds by using the fused deposition modeling (FDM) technique. The compressive strength and the shore hardness of the PHA/20%β-TCP scaffold were 36.7 MPa and 81.1 HD. The produced scaffolds presented compressive strength compatible with natural bone. In addition, the scaffolds with a well-controlled design of pore shape and size provided sufficient space for cellular activity. In vitro studies demonstrated that the addition of β-TCP could significantly improve the proliferation, adhesion, and migration of MC3T3-E1 cells in the PHA/β-TCP scaffold. Moreover, the osteogenesis-related genes expression of the PHA/β-TCP scaffold was enhanced compared to the PHA scaffolds. Therefore, the 3D-printed PHA/β-TCP scaffold represents an effective strategy to promote mechanical and biological properties, showing huge potential for bone tissue engineering applications.

Bioinspired laminated bioceramics with high toughness for bone tissue engineering.

For the research of biomaterials in bone tissue engineering, it is still a challenge to fabricate bioceramics that overcome brittleness while maintaining the great biological performance. Here, inspired by the toughness of natural materials with hierarchical laminated structure, we presented a directional assembly-sintering approach to fabricate laminated MXene/calcium silicate-based (L-M/CS) bioceramics. Benefiting from the orderly laminated structure, the L-M/CS bioceramics exhibited significantly enhanced toughness (2.23 MPa·m1/2) and high flexural strength (145 MPa), which were close to the mechanical properties of cortical bone. Furthermore, the L-M/CS bioceramics possessed more suitable degradability than traditional CaSiO3 bioceramics due to the newly formed CaTiSiO5 after sintering. Moreover, the L-M/CS bioceramics showed good biocompatibility and could stimulate the expression of osteogenesis-related genes. The mechanism of promoting osteogenic differentiation had been shown to be related to the Wnt signaling pathway. This work not only fabricated calcium silicate-based bioceramics with excellent mechanical and biological properties for bone tissue engineering but also provided a strategy for the combination of bionics and bioceramics.

Li-Doped Ti Surface for the Improvement of Osteointegration.

Aseptic loosening is the main factor that leads to the failure of orthopedic implants. Enhancing the early osteointegration of a bone implant can lower the risk of aseptic loosening. Here, a Li-doped surface was constructed on a Ti surface via plasma electrolytic oxidation (PEO) to improve osteointegration. The prepared Li-doped PEO coating showed a porous morphology and the sustained release of Li ions. In vitro results of rat bone marrow mesenchymal stem cell (rBMSC) culture studies suggested that the Li-doped Ti surface significantly favored cell adhesion. Moreover, it was found that the Li-doped surface enhanced alkaline phosphatase activity and extracellular matrix mineralization of rBMSCs. In addition, the surface improved the expression of osteogenesis-related genes. Furthermore, a bone implantation model indicated that the Li-doped Ti surface showed improved osteointegration. The incorporation of Li into a Ti surface is a promising method for orthopedic applications.

ZIF-8 modified multifunctional injectable photopolymerizable GelMA hydrogel for the treatment of periodontitis

Periodontitis is a chronic inflammatory disease caused by plaque that leads to alveolar bone resorption. In the treatment of periodontitis, it is necessary to reduce the bacterial load and promote alveolar bone regeneration. In this study, zeolitic imidazolate framework-8 (ZIF-8) is used in the treatment of periodontitis, and an injectable photopolymerizable ZIF-8/gelatin methacryloyl (GelMA) composite hydrogel (GelMA-Z) is constructed. We confirm that ZIF-8 nanoparticles are successfully loaded into GelMA, which demonstrates fluidity and photopolymerizability. GelMA-Z continuously releases Zn2+ and shows good cytocompatibility. In vitro, GelMA-Z can effectively upregulate the expression of osteogenesis-related genes and proteins, increase alkaline phosphatase activity, promote extracellular matrix mineralization by rat bone mesenchymal stem cells, and exert an obvious antibacterial effect against Porphyromonas gingivalis. In vivo, GelMA-Z reduces the bacterial load, relieves inflammation and promotes alveolar bone regeneration in a rat model. The above results show that GelMA-Z has potential prospects in the treatment of periodontitis. Statement of significanceVarious methods have been explored for the treatment of periodontitis. However, current regiments have difficulty achieving ideal alveolar bone regeneration. In this study, we constructed a zeolitic imidazolate framework-8 (ZIF-8)/gelatin methacryloyl (GelMA) composite hydrogel (GelMA-Z). (1) The injectable and photopolymerizable GelMA-Z showed biocompatibility in vitro and in vivo. (2) GelMA-Z continually released zinc ions to promote the osteogenic differentiation of bone mesenchymal stem cells and kill bacteria in vitro. (3) In a rat model, the GelMA-Z pregel solution was used to fill the periodontal pocket and then crosslinked by UV exposure. GelMA-Z can stably remain in the periodontal pocket to reduce the bacterial load, relieve inflammation and promote alveolar bone regeneration. In conclusion, GelMA-Z has great potential for use in the treatment of periodontitis, especially in promoting alveolar bone regeneration.

MicroRNA-203 mediates Porphyromonas gingivalis LPS-induced inflammation and differentiation of periodontal ligament cells.

In this study, we aimed to explore the effects of microRNA-203 (miR-203) on Porphyromonas gingivalis lipopolysaccharide (P.g. LPS)-stimulated periodontal ligament cells (PDLCs) and identify potential molecular targets for periodontitis treatment. Periodontal ligament cells were stimulated by P.g. LPS, followed by quantification of miR-203 and AP-1 expression. Next, loss- and gain-of-function experiments were applied in P.g. LPS-induced PDLCs. The proliferation, apoptosis, and differentiation of PDLCs were determined, and mineralized nodule numbers were counted. Functional assays were used to identify interactions among miR-203, activator protein-1 (AP-1), and intercellular adhesion molecule-1 (ICAM-1). In addition, expression of osteogenesis-related genes and release of proinflammatory factors were analyzed. miR-203 was found to be downregulated while AP-1 was upregulated in PDLCs stimulated by P.g. LPS. The overexpression of miR-203 promoted P.g. LPS-stimulated PDLC proliferation and differentiation, inhibited apoptosis, and increased the number of mineralized nodules. miR-203 was verified to downregulate AP-1/ICAM-1 axis. miR-203 overexpression reduced the secretion of proinflammatory factors while increasing the expression of osteogenesis-related genes in P.g. LPS-stimulated PDLCs, which was reversed by overexpressing AP-1 and ICAM-1. These experimental data demonstrated the potential inhibitory effects of overexpressed miR-203 on periodontitis development by promoting PDLC differentiation and suppressing inflammatory responses through AP-1/ICAM-1 axis.

Enhanced osseointegration of dental implants with reduced graphene oxide coating

BackgroundThe implants of pure titanium (Ti) and its alloys can lead to implant failure because of their poor interaction with bone-associated cells during bone regeneration. Surface modification over implants has achieved successful implants for enhanced osseointegration. Herein, we report a robust strategy to implement bioactive surface modification for implant interface enabled by the combinatorial system of reduced graphene oxide (rGO)-coated sandblasted, large-grit, and acid-etched (SLA) Ti to impart benefits to the implant.MethodsWe prepared SLA Ti (ST) implants with different surface modifications [i.e., rGO and recombinant human bone morphogenetic protein-2 (rhBMP-2)] and investigated their dental tissue regenerating ability in animal models. We performed comparative studies in surface property, in vitro cellular behaviors, and in vivo osseointegration activity among different groups, including ST (control), rhBMP-2-immobilized ST (BI-ST), rhBMP-2-treated ST (BT-ST), and rGO-coated ST (R-ST).ResultsSpectroscopic, diffractometric, and microscopic analyses confirmed that rGO was coated well around the surfaces of Ti discs (for cell study) and implant fixtures (for animal study). Furthermore, in vitro and in vivo studies revealed that the R-ST group showed significantly better effects in cell attachment and proliferation, alkaline phosphatase activity, matrix mineralization, expression of osteogenesis-related genes and protein, and osseointegration than the control (ST), BI-ST, and BT-ST groups.ConclusionHence, we suggest that the rGO-coated Ti can be a promising candidate for the application to dental or even orthopedic implants due to its ability to accelerate the healing rate with the high potential of osseointegration.

Fabrication of an ordered micro-/nanotextured titanium surface to improve osseointegration

Ordered microscale titanium (Ti) surface topography with homogeneous cell-sized microholes (20 µm in diameter) was fabricated using simple electrochemical etching. The as-prepared surface imposed with uniform titania nanotubes (TNTs, 70 nm in diameter) through electrochemical anodization showed no considerable change in the initial microscale morphology. Bone marrow mesenchymal stem cells (BMSCs) were used in evaluating the bioactivity. Compared with polished Ti and unordered microtextured Ti, the ordered microtextured Ti formed by electrochemical etching remarkably promoted cell attachment, alkaline phosphatase activity, collagen secretion, extracellular matrix mineralization, and osteogenesis-related gene expression but considerably inhibited cell proliferation. After TNTs were introduced to the ordered microtextured Ti, cell attachment and osteogenic differentiation indexes were further enhanced, and cell proliferation recovered over time. The ordered micro-/nanotextured Ti surface was more conducive to the cell attachment, proliferation, and osteogenesis of BMSCs than polished Ti with and without TNTs, unordered microtextured Ti with and without TNTs, and unitary ordered microtextured Ti. Thus, the novel ordered bio-inspired micro-/nanotextured structure composed of cell-sized microholes and TNTs on the Ti surface possessed a favorable interfacial environment that improved osseointegration, potentially optimizing Ti implant surface topography.