Expressed Protein Ligation Research Articles

Induction of innate and adaptive immunity by delivery of poly dA:dT to dendritic cells

Targeted delivery of antigens to dendritic cells (DCs) is a promising vaccination strategy. However, to ensure immunity, the approach depends on coadministration of an adjuvant. Here we ask whether targeting of both adjuvant and antigen to DCs is sufficient to induce immunity. Using a protein ligation method, we develop a general approach for linking the immune stimulant, poly dA:dT (pdA:dT), to a monoclonal antibody (mAb) specific for DEC205 (DEC). We show that DEC-specific mAbs deliver pdA:dT to DCs for the efficient production of type I interferon in human monocyte-derived DCs and in mice. Notably, adaptive T-cell immunity is elicited when mAbs specific for DEC-pdA:dT are used as the activation stimuli and are administered together with a DC-targeted antigen. Collectively, our studies indicate that DCs can integrate innate and adaptive immunity in vivo and suggest that dual delivery of antigen and adjuvant to DCs might be an efficient approach to vaccine development.

Recombinant expression of soluble murine prion protein for C-terminal modification

Membrane attachment of prion protein (PrP) via its glycosylphosphatidylinositol (GPI) anchor plays a key role during conversion of cellular PrPC into its pathogenic isoform PrPSc. Strategies to access homogenous lipidated PrP via expressed protein ligation (EPL) are required to fully decipher the effect of membrane attachment. Such strategies suffer from insoluble expression of PrP-intein fusion constructs and low folding efficiencies that severely limit the available amount of homogeneous lipidated PrP. Here, we describe an alternative method for expression of soluble PrP-intein fusion proteins in Escherichiacoli that provides access to natively folded PrP ready to use in EPL.

A redox trap to augment the intein toolbox

The unregulated activity of inteins during expression and consequent side reactions during work-up limits their widespread use in biotechnology and chemical biology. Therefore, we exploited a mechanism-based approach to regulate intein autocatalysis for biotechnological application. The system, inspired by our previous structural studies, is based on reversible trapping of the intein's catalytic cysteine residue through a disulfide bond. Using standard mutagenesis, the disulfide trap can be implemented to impart redox control over different inteins and for a variety of applications both in vitro and in Escherichia coli. Thereby, we first enhanced the output for bioconjugation in intein-mediated protein ligation, also referred to as expressed protein ligation, where precursor recovery and product yield were augmented fourfold to sixfold. Second, in bioseparation experiments, the redox trap boosted precursor recovery and product yield twofold. Finally, the disulfide-trap intein technology stimulated development of a novel bacterial redox sensor. This sensor reliably identified hyperoxic E. coli harboring mutations that disrupt the reductive pathways for thioredoxin and glutathione, against a background of wild-type cells.

Protein prosthesis: β‐peptides as reverse‐turn surrogates

The introduction of non-natural modules could provide unprecedented control over folding/unfolding behavior, conformational stability, and biological function of proteins. Success requires the interrogation of candidate modules in natural contexts. Here, expressed protein ligation is used to replace a reverse turn in bovine pancreatic ribonuclease (RNase A) with a synthetic β-dipeptide: β²-homoalanine-β³-homoalanine. This segment is known to adopt an unnatural reverse-turn conformation that contains a 10-membered ring hydrogen bond, but one with a donor-acceptor pattern opposite to that in the 10-membered rings of natural reverse turns. The RNase A variant has intact enzymatic activity, but unfolds more quickly and has diminished conformational stability relative to native RNase A. These data indicate that hydrogen-bonding pattern merits careful consideration in the selection of beneficial reverse-turn surrogates.

Semi-Synthesis of Labeled Proteins for Spectroscopic Applications

Since the introduction of SPPS by Merrifield in the 60s, peptide chemists have considered the possibility of preparing large proteins. The introduction of native chemical ligation in the 90s and then of expressed protein ligation have opened the way to the preparation of synthetic proteins without size limitations. This review focuses on semi-synthetic strategies useful to prepare proteins decorated with spectroscopic probes, like fluorescent labels and stable isotopes, and their biophysical applications. We show that expressed protein ligation, combining the advantages of organic chemistry with the easy and size limitless recombinant protein expression, is an excellent strategy for the chemical synthesis of labeled proteins, enabling a single protein to be functionalized at one or even more distinct positions with different probes.

Fluorescence Anisotropy in a Protein: DNA System Undergoing Inducible Assembly

Fluorescence anisotropy may be used as an indicator of homo-FRET making it an attractive reported of oligomer formation and aggregation. A model system was created consisting of a monomeric teal fluorescent protein peptide nucleic acid (mTFP-PNA) fusion. The mTFP-PNA monomer units produced by expressed protein ligation (EPL). An mTFP with a C-terminal thioester group was expressed with a modified intein and subsequently conjugated to a PNA with an N-terminal thiol group. This generates a native peptide bond at the ligation site. Addition of a complementary template DNA to solutions of mTFP-PNA monomer units resulted in template directed induced assembly. Assembly was confirmed by SDS-PAGE, mass spectrometry, and size exclusion HPLC.Fluorescence anisotropy was monitored over the course of a mTFP-PNA:DNA titration. Template coding for dimer formation was studied. The anisotropy showed a decreasing trend related to homo-FRET in the assembled forms. A maximal reduction (41%) was observed at a DNA to mTFP-PNA ratio of 1:2. Anisotropy, then increased steadily up to a 1:1 ratio.This study demonstrates an inducibly assembled homo-FRET system using expressed protein ligation which may be extended to study oligomerization and cluster formation in living systems.

Site-specific conjugation of RAFT polymers to proteins via expressed protein ligation

Site-specific protein conjugates with RAFT polymers were synthesized using expressed protein ligation. Stable micelles were formed from both linear block copolymer and Y-shaped conjugates.

Streamlined Expressed Protein Ligation Using Split Inteins

Chemically modified proteins are invaluable tools for studying the molecular details of biological processes, and they also hold great potential as new therapeutic agents. Several methods have been developed for the site-specific modification of proteins, one of the most widely used being expressed protein ligation (EPL) in which a recombinant α-thioester is ligated to an N-terminal Cys-containing peptide. Despite the widespread use of EPL, the generation and isolation of the required recombinant protein α-thioesters remain challenging. We describe here a new method for the preparation and purification of recombinant protein α-thioesters using engineered versions of naturally split DnaE inteins. This family of autoprocessing enzymes is closely related to the inteins currently used for protein α-thioester generation, but they feature faster kinetics and are split into two inactive polypeptides that need to associate to become active. Taking advantage of the strong affinity between the two split intein fragments, we devised a streamlined procedure for the purification and generation of protein α-thioesters from cell lysates and applied this strategy for the semisynthesis of a variety of proteins including an acetylated histone and a site-specifically modified monoclonal antibody.

Preparing semisynthetic and fully synthetic histones h3 and h4 to modify the nucleosome core.

The purpose of this chapter is to provide practical chemical ligation procedures to prepare histone proteins suitable for the reconstitution of nucleosomes with specific posttranslational modifications in the nucleosome core. Detailed methods are described for the efficient preparation of semisynthetic histones H3 and H4 with modifications near the C-terminus of the proteins by expressed protein ligation and desulfurization. Additionally, we present optimized protocols for solid phase peptide synthesis combined with sequential native chemical ligation to generate fully synthetic modified histone H3, here in the context of H3 lysine 56 acetylation (H3K56ac).

Stability of Nucleosomes Containing Homogenously Ubiquitylated H2A and H2B Prepared Using Semisynthesis

Post-translational modifications (PTMs) of histones are an essential feature in the dynamic regulation of chromatin. One of these modifications, ubiquitylation, has been speculated to directly influence the stability of the nucleosome, which represents the basic building block of chromatin. Here we report a strategy for the semisynthesis of site-specifically ubiquitylated histone H2A (uH2A). This branched protein was generated through a three-piece expressed protein ligation approach including a traceless ligation at valine. uH2A could be efficiently incorporated into nucleosomes, thereby opening the way to detailed biochemical and biophysical studies on the function of this PTM. Accordingly, we used uH2A, as well as a previously generated ubiquitylated H2B, in chaperone-coupled nucleosome stability assays to demonstrate that the direct effect of ubiquitylated histones on nucleosomal stability is in fact modest.

Residue 75 of Interleukin‐8 is Crucial for its Interactions with Glycosaminoglycans

The interactions between regulatory proteins such as interleukin-8 (IL-8) and glycosaminoglycans are of great interest both for the general understanding of regulatory processes in biology and for the development of implant coatings and innovative materials that suppress undesired immune responses and improve wound healing. In previous work, a number of residues of IL-8 that interact strongly with several glycosaminoglycans (GAGs) have been identified. In particular, the negatively charged Glu75 was reported to be involved in interactions with charged GAGs. To improve understanding of the role of this residue, we generated a selectively (15)N-labeled E75K variant of IL-8(1-77) by expressed protein ligation. NMR and fluorescence spectroscopy in combination with molecular modeling were applied to evaluate the particular role of residue 75 in interactions with GAGs. Remarkably, more residues in the variant responded to GAG binding than in the wild-type. For the first time, we identified amino acids 34 to 36 as additional residues in the loop region of IL-8(1-77) that participate in the interactions with GAGs. These findings indicate that the N terminus of the E75K variant is more important as a second binding site for GAGs than that of the wild-type IL-8(1-77).

Characterization of Semisynthetic and Naturally Nα-Acetylated α-Synuclein in Vitro and in Intact Cells: IMPLICATIONS FOR AGGREGATION AND CELLULAR PROPERTIES OF α-SYNUCLEIN

N-terminal acetylation is a very common post-translational modification, although its role in regulating protein physical properties and function remains poorly understood. α-Synuclein (α-syn), a protein that has been linked to the pathogenesis of Parkinson disease, is constitutively N(α)-acetylated in vivo. Nevertheless, most of the biochemical and biophysical studies on the structure, aggregation, and function of α-syn in vitro utilize recombinant α-syn from Escherichia coli, which is not N-terminally acetylated. To elucidate the effect of N(α)-acetylation on the biophysical and biological properties of α-syn, we produced N(α)-acetylated α-syn first using a semisynthetic methodology based on expressed protein ligation (Berrade, L., and Camarero, J. A. (2009) Cell. Mol. Life Sci. 66, 3909-3922) and then a recombinant expression strategy, to compare its properties to unacetylated α-syn. We demonstrate that both WT and N(α)-acetylated α-syn share a similar secondary structure and oligomeric state using both purified protein preparations and in-cell NMR on E. coli overexpressing N(α)-acetylated α-syn. The two proteins have very close aggregation propensities as shown by thioflavin T binding and sedimentation assays. Furthermore, both N(α)-acetylated and WT α-syn exhibited similar ability to bind synaptosomal membranes in vitro and in HeLa cells, where both internalized proteins exhibited prominent cytosolic subcellular distribution. We then determined the effect of attenuating N(α)-acetylation in living cells, first by using a nonacetylable mutant and then by silencing the enzyme responsible for α-syn N(α)-acetylation. Both approaches revealed similar subcellular distribution and membrane binding for both the nonacetylable mutant and WT α-syn, suggesting that N-terminal acetylation does not significantly affect its structure in vitro and in intact cells.

Ultrafast Protein Splicing is Common among Cyanobacterial Split Inteins: Implications for Protein Engineering

We describe the first systematic study of a family of inteins, the split DnaE inteins from cyanobacteria. By measuring in vivo splicing efficiencies and in vitro kinetics, we demonstrate that several inteins can catalyze protein trans-splicing in tens of seconds rather than hours, as is commonly observed for this autoprocessing protein family. Furthermore, we show that when artificially fused, these inteins can be used for rapid generation of protein α-thioesters for expressed protein ligation. This comprehensive survey of split inteins provides indispensable information for the development and improvement of intein-based tools for chemical biology.

Segmental isotopic labeling of a 140 kDa dimeric multi-domain protein CheA from Escherichia coli by expressed protein ligation and protein trans-splicing

Segmental isotopic labeling is a powerful labeling tool to facilitate NMR studies of larger proteins by not only alleviating the signal overlap problem but also retaining features of uniform isotopic labeling. Although two approaches, expressed protein ligation (EPL) and protein trans-splicing (PTS), have been mainly used for segmental isotopic labeling, there has been no single example in which both approaches have been directly used with an identical protein. Here we applied both EPL and PTS methods to a 140 kDa dimeric multi-domain protein E. coli CheA, and successfully produced the ligated CheA dimer by both approaches. In EPL approach, extensive optimization of the ligation sites and the conditions were required to obtain sufficient amount for an NMR sample of CheA, because CheA contains a dimer forming domain and it was not possible to achieve high reactant concentrations (1–5 mM) of CheA fragments for the ideal EPL condition, thereby resulting in the low yield of segmentally labelled CheA dimer. PTS approach sufficiently produced segmentally labeled ligated CheA in vivo as well as in vitro without extensive optimizations. This is presumably because CheA has self-contained domains connected with long linkers, accommodating a seven-residue mutation without loss of the function, which was introduced by PTS to achieve the high yield. PTS approach was less laborious than EPL approach for the routine preparation of segmentally-isotope labeled CheA dimer. Both approaches remain to be further developed for facilitating preparations of segmental isotope-labelled samples without extensive optimizations for ligation.Electronic supplementary materialThe online version of this article (doi:10.1007/s10858-012-9628-3) contains supplementary material, which is available to authorized users.

Effect of ligand density, receptor density, and nanoparticle size on cell targeting

It is generally accepted that the presentation of multiple ligands on a nanoparticle (NP) surface can improve cell targeting; however, little work has been done to determine whether an optimal ligand density exists. We have recently developed a site-specific bioconjugation strategy that allows for distinct control of ligand density on a NP through the combined utilization of expressed protein ligation (EPL) and copper-free click chemistry. This EPL-Click conjugation strategy was applied to create superparamagnetic iron oxide (SPIO) NPs labeled with HER2/neu targeting affibodies at differing ligand densities. It was discovered that an intermediate ligand density provided statistically significant improvements in cell binding in comparison with higher and lower ligand densities. This intermediate optimal ligand density was conserved across NPs with differing hydrodynamic diameters, different HER2/neu targeting ligands and also to cells with lower receptor densities. Additionally, an intermediate optimal ligand density was also evident when NPs were labeled with folic acid. From the Clinical EditorThe authors of this study investigated optimal ligand density with SPIO-based labeling and concluded that intermediate density appears to have the most optimal labeling properties from the standpoint of its T2* shortening effect.

A chemical method for investigating disulfide‐coupled peptide and protein folding

Investigations of protein folding have largely involved studies using disulfide-containing proteins, as disulfide-coupled folding of proteins permits the folding intermediates to be trapped and their conformations determined. Over the last decade, a combination of new biotechnical and chemical methodology has resulted in a remarkable acceleration in our understanding of the mechanism of disulfide-coupled protein folding. In particular, expressed protein ligation, a combination of native chemical ligation and an intein-based approach, permits specifically labeled proteins to be easily produced for studies of protein folding using biophysical methods, such as NMR spectroscopy and X-ray crystallography. A method for regio-selective formation of disulfide bonds using chemical procedures has also been established. This strategy is particularly relevant for the study of disulfide-coupled protein folding, and provides us not only with the native conformation, but also the kinetically trapped topological isomer with native disulfide bonds. Here we review recent developments and applications of biotechnical and chemical methods to investigations of disulfide-coupled peptide and protein folding. Chemical additives designed to accelerate correct protein folding and to avoid non-specific aggregation are also discussed.

Synthetic glycopeptides and glycoproteins with applications in biological research

Over the past few years, synthetic methods for the preparation of complex glycopeptides have been drastically improved. The need for homogenous glycopeptides and glycoproteins with defined chemical structures to study diverse biological phenomena further enhances the development of methodologies. Selected recent advances in synthesis and applications, in which glycopeptides or glycoproteins serve as tools for biological studies, are reviewed. The importance of specific antibodies directed to the glycan part, as well as the peptide backbone has been realized during the development of synthetic glycopeptide-based anti-tumor vaccines. The fine-tuning of native chemical ligation (NCL), expressed protein ligation (EPL), and chemoenzymatic glycosylation techniques have all together enabled the synthesis of functional glycoproteins. The synthesis of structurally defined, complex glycopeptides or glyco-clusters presented on natural peptide backbones, or mimics thereof, offer further possibilities to study protein-binding events.

Chemical Biology Techniques Unlock the Secrets of Casein Kinase 2 Regulation by Phosphorylation and Glycosylation

The key to understanding: The application of expressed protein ligation and protein microarrays enabled an unparalleled insight into the complex interaction of phosphorylation and glycosylation on casein kinase 2 and its biological outcome.

Expressed protein ligation-mediated template protein extension

Expressed protein ligation (EPL) was performed to investigate sequence requirements for a variant human apolipoprotein A-I (apoA-I) to adopt a folded structure. A C-terminal truncated apoA-I, corresponding to residues 1–172, was expressed and isolated from Escherichia coli. Compared to full length apoA-I (243 amino acids), apoA-I(1–172) displayed less α-helix secondary structure and lower stability in solution. To determine if extension of this polypeptide would confer secondary structure content and/or stability, 20 residues were added to the C-terminus of apoA-I(1–172) by EPL, creating apoA-IMilano(1–192). The EPL product displayed biophysical properties similar to full-length apoA-IMilano. The results provide a general protein engineering strategy to modify the length of a recombinant template polypeptide using synthetic peptides as well as a convenient, cost effective way to investigate the structure/function relations in apolipoprotein fragments or domains of different size.

Intein‐mediated peptide bond cleavage adjacent to aspargine or glutamine

Protein splicing is a post‐translational, self‐catalyzed process in which an intervening polypeptide, the intein, is self‐excised from the flanking polypeptides, or exteins. The intein that interrupts the DNA polymerase of Pyrococcus abyssi can facilitate protein splicing in a temperature‐dependent fashion. This intein has a Cterminal Gln, which facilitates the third step of splicing, side chain cyclization coupled to peptide bond cleavage. We plan to induce C‐terminal cleavage of an intein (uncoupled from splicing) to facilitate purification from a solid affinity resin. We have fused the intein with an N‐terminal affinity domain and a C‐terminal target protein for purification, such that C‐terminal cleavage of the intein via cyclization of Asn or Gln liberates the C‐terminal domain with an N‐terminal Cys. This fragment will serve as a substrate for expressed protein ligation. In addition, we will compare the rate of the cyclization between glutamine and asparagine in model peptides with an N‐terminal Abz fluorophore and a C‐terminal Lys‐DNP quencher, using a fluorescence assay to measure cleavage. We will determine the rate of cleavage as a function of temperature and pH.This material is based upon work supported by the National Science Foundation under grant MCB‐0950245 and by the Camille and Henry Dreyfus Foundation.