Exposure Assessment Component Research Articles

Using Water-Distribution System Modeling to Assist Epidemiologic Investigations

An epidemiologic study of childhood leukemia and central nervous system cancers that occurred in the period 1979 through 1996 in Dover Township, N.J., is being conducted. Because groundwater contamination has been documented historically in public- and private-supply wells, there is the possibility of exposure through this pathway. The Dover Township area has been primarily served by a public water supply that relies solely on groundwater; therefore, a protocol has been developed for using a water-distribution model such as EPANET as a tool to assist the exposure assessment component of epidemiologic investigation. The model is being used to investigate the question of human exposure to groundwater contaminants. Because of the unavailability of historical data, the model was calibrated to the present-day (1998) water-distribution system characteristics. Pressure data were gathered simultaneously at 25 hydrants throughout the distribution system using continuous recording pressure data loggers during 48 h tests in March and August 1998. Data for storage tank water levels, system demand, and pump and well status (on/off) were also obtained. Field data gathering procedures, calibration results, and water-quality simulation using a naturally occurring element (barium), as well as an analysis indicating the percent of water originating from points of entry to the water-distribution system for 1998 conditions, are presented.

The EPA health risk assessment of methylcyclopentadienyl manganese tricarbonyl (MMT).

This paper describes the U.S. Environmental Protection Agency's assessment of potential health risks associated with the possible widespread use of a manganese (Mn)-based fuel additive, methylcyclopentadienyl manganese tricarbonyl (MMT). This assessment was significant in several respects and may be instructive in identifying certain methodological issues of general relevance to risk assessment. A major feature of the inhalation health risk assessment was the derivation of Mn inhalation reference concentration (RfC) estimates using various statistical approaches, including benchmark dose and Bayesian analyses. The exposure assessment component used data from the Particle Total Exposure Assessment Methodology (PTEAM) study and other sources to estimate personal exposure levels of particulate Mn attributable to the permitted use of MMT in leaded gasoline in Riverside, CA, at the time of the PTEAM study; on this basis it was then possible to predict a distribution of possible future exposure levels associated with the use of MMT in all unleaded gasoline. Qualitative as well as quantitative aspects of the risk characterization are summarized, along with inherent uncertainties due to data limitations.

The biological exposure indices: a key component in protecting workers from toxic chemicals.

Biological monitoring of exposure to chemicals in the workplace is an important component of exposure assessment and prevention of adverse health effects. It should be employed in conjunction with ambient air monitoring to provide information on the absorbed dose of a chemical agent and the effect of all routes of exposure. Judgments regarding the acceptable level of a chemical or its metabolite in biological samples are facilitated by comparison to a reference value. The American Conference of Governmental Industrial Hygienists has established a series of recommended reference values called the Biological Exposure Indices (BEI). The history and characteristics of the BEI are reviewed, and their suitability for use by occupational health specialists is examined. A number of challenges and stimuli to the continued development and improvement of these reference values are described, and the impact of recent advances in macromolecular biology is assessed.

The Biological Exposure Indices: A Key Component in Protecting Workers from Toxic Chemicals

Abstract Biological monitoring of exposure to chemicals in the workplace is an important component of exposure assessment and prevention of adverse health effects. It should be employed in conjunction with ambient air monitoring to provide information on the absorbed dose of a chemical agent and the effect of all routes of exposure. Judgments regarding the acceptable level of a chemical or its metabolite in biological samples are facilitated by comparison to a reference value. The American Conference of Governmental Industrial Hygienists has established a series of recommended reference values called the Biological Exposure Indices (BEI). The history and characteristics of the BEI are reviewed, and their suitability for use by occupational health specialists is examined. A number of challenges and stimuli to the continued development and improvement of these reference values are described, and the impact of recent advances in macromolecular biology is assessed.

Exposure assessment: then, now, and quantum leaps in the future.

Health risk assessments have become so widely accepted in the United States that their conclusions are a major factor in many environmental decisions. Although the risk assessment paradigm is 10 years old, the basic risk assessment process has been used by certain regulatory agencies for nearly 40 years. Each of the four components of the paradigm has undergone significant refinements, particularly during the last 5 years. A recent step in the development of the exposure assessment component can be found in the 1992 EPA Guidelines for Exposure Assessment. Rather than assuming worst-case or hypothetical maximum exposures, these guidelines are designed to lead to an accurate characterization, making use of a number of scientific advances. Many exposure parameters have become better defined, and more sensitive techniques now exist for measuring concentrations of contaminants in the environment. Statistical procedures for characterizing variability, using Monte Carlo or similar approaches, eliminate the need to select point estimates for all individual exposure parameters. These probabilistic models can more accurately characterize the full range of exposures that may potentially be encountered by a given population at a particular site, reducing the need to select highly conservative values to account for this form of uncertainty in the exposure estimate. Lastly, our awareness of the uncertainties in the exposure assessment as well as our knowledge as to how best to characterize them will almost certainly provide evaluations that will be more credible and, therein, more useful to risk managers.(ABSTRACT TRUNCATED AT 250 WORDS)

Mortality studies of machining fluid exposure in the automobile industry I: A standardized mortality ratio analysis

Machining fluids are widely used in a variety of common industrial metalworking operations to lubricate and cool both the tool and the working surfaces. Previous studies have suggested elevated respiratory, digestive, and skin cancers in exposed populations. This cohort study was initiated to assess whether long-term exposure to machining fluids in the course of machining, grinding, and other cutting operations is associated with excess cancer mortality. The cohort includes more than 45,000 automobile production workers from 3 plants, almost 1 million years of follow-up, over 10,000 deaths, and an extensive exposure assessment component. Standardized mortality ratios (SMRs) have been estimated for each of the 3 plants, using both U.S. as well as local populations as reference. Relative risks of 1.2-3.1 have been observed for several specific respiratory and digestive cancers of a priori interest, including cancer of the stomach, large intestine, pancreas, lung, and larynx. In addition, elevated risks for leukemia and asthma were noted. Future exposure-response analyses will provide the opportunity to identify relatively modest excesses in cause-specific mortality risk associated with exposure to specific types (straight, soluble, or synthetic), additives, or components of machining fluids.