Exponential Pulse Research Articles

Design and Implementation of an Automated Instrument for Battery Charging Experiments

Accurate and long-term measurements are essential in battery charging research and development, to evaluate and compare different techniques and their effectiveness. In such approaches, a very good control of certain charging parameters is also necessary, during several hours or even days. Thus, it became necessary to obtain an automatic instrument that could ensure the precision and repeatability of the experiments, but also the flexibility regarding the type and size of the b attery. This article presents the design, implementation and preliminary experimentation of an instrument for automation and monitoring of battery charge-discharge cycles. The tool adds exponential current pulses to the battery charging process, especially in the constant current phase. Such pulses are rarely addressed in the literature, although some studies suggest that they have the potential to improve batteries performance.

The Thermodynamic Responses of FG Conical/Cylindrical/Annular Panels with Circumferentially Variable Dimensions

This paper is the first to develop a meshless thermodynamic model with circumferentially variable dimensions to analyze the thermal-vibration mechanisms of typical functionally graded (FG) panel-type structures, mainly including conical, cylindrical, and annular panels. The longitudinal variation of the panel-type structure’s circumferential dimensions is taken into account according to specific rules. The Thin Plate Inverse Mapping (TPIM) meshless shape functions are introduced to characterize the displacement components associated with each substructure. Thermodynamic equations are formulated based on FSDT thermo-elastic theory as well as Hamilton’s principle. Rectangular and exponential pulse loads are taken into consideration for forced vibration analysis in this formulation. Numerical convergence and comparative cases are provided. Solutions from the literature and finite element simulation results are utilized for comparison, revealing that the percentage differences observed are all less than 0.025%. This confirms the reliability and accuracy of the developed analysis model. In conclusion, a detailed investigation is conducted on the influences of geometrical dimensions, boundary conditions, as well as thermal and external loads on the thermodynamic behaviors of FG panel-type structures with circumferentially variable dimensions.

Evaluation of the influence of the duration of the pause between the phases of depolarizing biphasic half-sinusoidal and truncated exponential defibrillation pulses on their energy efficiency

Evaluation of the influence of the duration of the pause between the phases of depolarizing biphasic half-sinusoidal and truncated exponential defibrillation pulses on their energy efficiency

An electroporation cytometry system for long-term, live cell cycle analysis.

Electric fields are used in biology to address a broad range of questions and through a variety of techniques, including electroporation, gene electrotransfer (GET), electrostimulation (ES), and electrochemotherapy. Each of these modalities requires specific conditions and has drastically different target outcomes on the cell. ES has demonstrated that non-pore forming electric fields alter cell cycle progression. However, pore forming electric fields such as with GET have not been as widely explored despite major clinical advancements. Additionally, the real-time visual analysis of electrical field effects on mammalian cell culture is currently lacking among most commercial systems. To facilitate investigations into these research areas, an electroporation cytometry system was developed including a custom chamber compatible with live cell imaging and exponential decay pulse generator for live cell analysis. The functionality of the system was demonstrated using a recombinant cell line using U-2 OS cells and FUCCI(CA)5 cell cycle reporter. The exposure of the cells to a 180 V pulse in both unsynchronized and synchronized populations revealed an effect on the cell cycle.

Investigation of electromagnetic pulse scattering for metallic object classification using machine learning

ABSTRACT This paper presents a metallic object classification method using various electromagnetic pulses. Each electromagnetic pulse irradiated eight metallic objects placed at increasing distances from 10 mm to 40 mm relative to the electromagnetic sensing system. The electromagnetic sensing system consisted of two RL circuits placed in close proximity. Objects were classified using linear (perceptron and multiclass logistic regression) and non-linear (neural network, 1D convolutional neural network (CNN) and 2D CNN) machine learning classifiers. The machine learning classifiers were trained on experimental data collected in an electromagnetically shielded laboratory. A 10-fold cross-validation mean classification accuracy of 99.4 ± 0.3% for the 1D CNN classifier, and 92.9 ± 1.2% for the 2D CNN classifier, was achieved using a rectangular chirp electromagnetic pulse. The rectangular chirp pulse outperformed two-sided decaying exponential, Gaussian, triangular, raised cosine, and rectangular pulses. All pulses had equal energy. While the rectangular chirp performed best overall, other pulses more accurately distinguished between some objects.

Field tests of square and double exponential pulses for transient resistivity measurements using Wenner arrays and hemispheres

Models of frequency-dependent soil resistivity ρ(f) suggest the dual concept of time-dependent resistivity ρ(t) that, for high resistivity soil, increases from 100 ns to 100 μs, a range of time relevant for lightning backflashover performance calculations. Measurements of ρ(t) can be made by impressing impulse or step current and monitoring voltage rise. Time-dependent resistivity can be established with Wenner or Schlumberger probe arrays and also with oblique fall-of-potential measurements from buried hemispheres. Tests show that rectangular and double-exponential pulse currents both have value. Specialized evaluation using “Drained Net Charge” concepts may yield estimates of low-frequency resistivity ρo.

A multiphysics SET modeling method based on machine learning

AbstractWith continuous downscaling of transistor sizes, the sensitivity to single event effect (SET) has become one of the most important reliability issues for aerospace integrated circuits. Besides the SET, integrated circuits will be affected by multiphysics such as temperature and voltage when working in space. Currently, the commonly used modeling methods are based on physical mechanisms and the double exponential pulse current. However, both methods are hard to build an accurate SET current model when various variables are considered. In this article, a novel machine learning modeling method of multiphysics SET is proposed, using intelligent algorithms to optimize the network also. With this method, we can obtain a reasonable and accurate multiphysics SET model based on neural network with single hidden layer, and there is no need to consider complex physical mechanisms. The model data is collected from TCAD simulation. Ant colony algorithm was used to optimize the initial values of the network. The RMS (root mean square error) of modeling result is less than 2%.

Intermittent Kac's flights and the generalized telegrapher's equation.

A generalized one-dimensional telegrapher equationassociated with an intermittent change of sign in the velocity of a Kac's flight has been proposed. To solve this random differential equation, we used the enlarged master equationapproach to obtain the exact differential equationfor the evolution of a normalized positive distribution. This distribution is associated with a generalized finite-velocity diffusionlike process. We studied the robustness of the ballistic regime, the cutoff of its domain, and the time-dependent Gaussian convergence. The second moment for the evolution of the profile has been studied as a function of non-Poisson statistics (possibly intermittent) for the time intervals Δ_{ij} in the Kac's flight. Numerical results for the evolution of sharp and wide initial profiles have also been presented. In addition, for comparison with a non-Gaussian process at all times, we have revisited the non-Markov Poisson's flight with exponential pulses. A theory for generalized random flights with intermittent stochastic velocity and in the presence of a force is also presented, and the stationary distribution for two classes of potential has been obtained.

Response Characteristics of a ZnO Arrester Under Nanosecond Electromagnetic Pulse

Zinc oxide arresters, a major type of overvoltage protection equipment in power systems, can suppress transient lightning overvoltage, operation overvoltage, and other types of power surges. However, the response characteristics and protection effects under nanosecond pulses, such as those in a high-altitude electromagnetic pulse conduction region, remain unclear. Therefore, the surge protection performance of arresters should be properly understood, and high-performance arresters should be developed. In this study, critical parameters, including overshoot peak voltage, residual voltage, response time, and voltammetry characteristics of a representative 10 kV ZnO arrester under nanosecond pulses, were obtained using a double exponential pulse current injection source. The overshoot peak voltage of this arrester under a nanosecond pulse is 2.19 times of lightning impulse residual voltage, and the residual voltage ratio under a nanosecond pulse is 4.31. The average response time is approximately 45 ns, and the response time is independent of the nanosecond pulse amplitude. Furthermore, an electromagnetic transient model of this type of lightning arrester is established based on the CIGRE guidelines, as well as a method to determine the key parameters. The model can simultaneously account for the response characteristics of the small current region and the conduction region of the arrester, which properly agrees with the experimental results.

Novel Curve Fitting Analysis of NDVI Data to Describe Turf Fertilizer Response

Evaluating the effectiveness of fertilizers on crops without traditional yield is difficult, as clipping collection is time-consuming and not indicative of the desired response to the fertilizer. Remote sensing techniques, like the normalized difference vegetation index (NDVI), have emerged as an effective tool to combat these issues. Canopy reflectance, measured by NDVI, is commonly used to differentiate turfgrass response to nitrogen (N) fertilization treatments; however, advancements in data processing are needed for greater differentiation between treatments and better testing of the effects of fertilizer responses. Presented here is an advancement in the processing of NDVI data by applying a compound exponential (pulse peak) function to changes in NDVI over time, relative to a control. This method’s effectiveness in differentiating between fertilizers was evaluated by applying polymer-coated urea (PCU), an enhanced efficiency fertilizer (EEF), and urea on turfgrass to show the usefulness of the novel curve fitting in highlighting differences in fertilizer response. The field study was carried out on an established Kentucky bluegrass (Poa pratensis L.) blend on a sandy loam soil rootzone maintained with a typical home lawn maintenance regime. Ratios of PCU to urea ranging from 100% urea to 100% PCU with increments of 20% of PCU were used to observe a continuum of response between the two fertilizer types. The N rate for all blends was 73 kg ha−1, with unfertilized plots used as a control to set baseline measurements for the curve fitting. Turfgrass response to N fertilization treatments was assessed through visual turfgrass quality ratings, dry matter yield, and canopy reflectance, where higher urea content resulted in the shortest time to maximum ∆NDVI (24 days), while 100% EEF reached maximum ∆NDVI at 56 days. The novel curve fitting analysis of the NDVI data allowed for differentiation between treatments, provided a measure of fertilizer effects, and differentiated between urea and enhanced efficiency fertilizers.

A Compact High-Stability Nanosecond Pulse Test System Using Corona-Stabilized Switch and Coaxial Resistance Divider

Due to the lack of a standard nanosecond high-voltage pulse generator for sensor calibration, a high-stability nanosecond high-voltage pulse test system was developed in terms of circuit analysis, structural design, and performance test. By establishing the equivalent circuit model of the nanosecond pulse generator, the circuit component parameters of the five-stage Marx loop and the one-stage compression steepening unit were simulated. The influence of the action performance of the steepening gap on the characteristics of output nanosecond pulse was analyzed. The nanosecond pulse test system was established through the structural design of the nanosecond pulse-generating circuit, the development of a high-performance corona-stabilized switch, and the measurement of a fast-response resistance divider made of metal oxide thin-film resistors. The nanosecond pulse test system has the capability to output a double exponential nanosecond pulse voltages in the amplitude range of 10–60 kV with a rise time of 2.3 ± 0.5 ns and a half-peak time of 23 ± 5 ns. In addition, the output pulse voltage has a high consistency and stability in the full amplitude range. The maximum relative standard deviation of the peak value is 1.517%, and the relative standard uncertainty is less than 5‰.

A Modeling and Design Methodology of Double Exponential Pulse Generator for Simulation-Based Conducted Disturbance Immunity Testing

In this paper, an equivalent circuit model of a double-exponential pulse generator is proposed for use as a time-domain noise source in high-altitude electromagnetic pulse (HEMP) conducted disturbance immunity testing. The analytic relationship between the proposed equivalent circuit model and the source pulse requirements expressed by the test standards is derived. Based on this relationship, a design methodology for the equivalent circuit model is proposed to extract the circuit components that satisfy the source pulse requirements, particularly in the form of source impedance and pulse waveform requirements. The proposed design methodology is applied to design an equivalent circuit model of the double exponential pulse generator with various test modes in the conducted disturbance immunity test. The designed double exponential pulse generator is applied to a simulation-based conductive disturbance immunity testing platform based on the International Electrotechnical Commission (IEC) 61000-4-24 standard to validate the effectiveness of the proposed equivalent circuit model and design methodology.

Impact of pulsed electric fields (PEF) treatment on the peeling ability of tomatoes and kiwi fruits

Peeling is a standard food processing operation that removes the outer layer of fruits and vegetables. It can improve the appearance and texture of many fruits and vegetables and is often necessary for further food preparation. Developing new and innovative peeling methods to minimise losses and enhance product quality is an area of active research in the food industry. The objective of this study was to evaluate how PEF affects the peeling ability of tomatoes and kiwi fruits, as well as the chemical and physical characteristics of the resulting peeled products. In detail, monopolar exponential decay pulses were applied, with an electric field strength of 1.0 kV/cm and a resulting total energy input in the range of 0.6 and 5.0 kJ/kg for tomatoes and 1.2 and 12.6 kJ/kg for kiwi fruits. Two methods were used to compare the effectiveness of PEF treatments with traditional peeling methods: hot-water blanching (98°C for 60 s) and lye peeling (98°C for 45 s, in 2% NaOH solution). The peeling efficiency was evaluated through manual and mechanical methods as well as measuring weight loss. The quality of the final peeled product was assessed by mechanical properties of the pericarp, colour (L*, a*, b* scale), ascorbic acid content, chlorophyll a and b, carotenoids, total polyphenols content and antioxidant activity. The PEF treatment applied to whole red tomatoes (1.0 kV/cm, 5.0 kJ/kg) and whole kiwi fruits (1.0 kV/cm, 12.6 kJ/kg) resulted in a significant decrease (p≤ 0.05) of up to 43% and 83% in the force required for mechanical peeling, respectively. The PEF treatment showed comparable or superior peeling ability and significantly reduced product losses compared to hot-water blanching and lye peeling methods. However, the softening and the weight losses tend to increase by increasing the pulses for both investigated matrices. Moreover, by applying PEF instead of blanching or lye peeling, the chemical quality and the colour were better preserved (ΔE < 2). This study proved that PEF could be a promising non-thermal technology to better peel tomatoes and kiwi fruits without affecting their final quality. Consequently, applying PEF as a treatment to facilitate peeling has remarkable potential as an industrial application to reduce energy consumption and issues related to wastewater management typically occurring during the peeling with lye agents.

Stochastic modeling of blob-like plasma filaments in the scrape-off layer: Theoretical foundation

A stochastic model for a superposition of uncorrelated pulses with a random distribution of amplitudes, sizes, and velocities is presented. The pulses are assumed to move radially with fixed shape and amplitudes decaying exponentially in time due to linear damping. The pulse velocities are taken to be time-independent but randomly distributed. The implications of a distribution of pulse amplitudes, sizes, and velocities are investigated. Closed-form expressions for the cumulants and probability density functions for the process are derived in the case of exponential pulses and a discrete uniform distribution of pulse velocities. The results describe many features of the boundary region of magnetically confined plasmas, such as high average particle densities, broad and flat radial profiles, and intermittent large-amplitude fluctuations. The stochastic model elucidates how these phenomena are related to the statistical properties of blob-like structures. In particular, the presence of fast pulses generally leads to flattened far scrape-off layer profiles and enhanced intermittency, which amplifies plasma–wall interactions.

A Test Method for Response Behavior of Metal-Oxide Arrester Subjected to Transient Electromagnetic Disturbances

Metal-oxide arresters (MOA) are widely used to protect equipment against transient electromagnetic disturbances (TED) like very fast transient overvoltage (VFTO), high-altitude electromagnetic pulse (HEMP), lightning pulse, <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">et al.</i> Researches on the performance of MOA under microsecond level rise-time TED are abundant, such as lightning pulse. However, when MOA is subjected to TED of rise-time at nanosecond level, the voltage/current responses of MOA are not fully studied due to the lack of a standardized and reliable test setup. In this paper, a test setup is proposed for acquiring the response behavior of MOA under nanosecond level pulse. The setup is comprised of a pulse generator, a two-branch transmission line system and a high voltage power divider. The generator can provide stable double exponential pulse with tunable rise-time ranging from 5 ns to 100 ns. The divider ensures an even distribution of voltage/current surge wave along the two-branch line. Through the numerical analysis, both impinging and residual surge waveforms could be retrieved from measurements. The proposed method has been applied to investigate response behavior of MOA subjected to nanosecond level rise-time pulses.

Mother Wavelet Performance Evaluation for Noise Removal in Partial Discharge Signals

This article aims to study the pattern of partial discharge (PD) signals occurring on the insulators of high-voltage systems. A mother wavelet comparison and wavelet decomposition are presented to detect and locate PD signals by dividing them into three processes: 1) Signal test generation, employing RC and RLC impedance circuits whereby the output voltage pulses in the RC impedance circuit are expressed as damped exponential pulses (DEPs) and those of the RLC as damped oscillatory pulses (DOPs). White Gaussian noise (AWGN) is then added, which mimics the effect of many random processes in measurement systems. The concept involves applying noise to the original signal and removing it with wavelet transform using various wavelet templates such as Daubechies, Coiflet, Symlet, and biorthogonal to separate the signal components. The experiment results are then compared, and a performance evaluation performed using mean square error (MSE) as in the first two signals. 2) DEPs and DOPs are added with a sine wave to simulate a virtual measurement from a measuring instrument according to the superposition principle using a band-pass filter with the frequency range specified by the two elements to determine the frequency of the resulting PD. 3). The results of the PD signal experiments developed in the laboratory are also evaluated for efficiency by subjective measurement by a PD signal specialist. Therefore, partial discharge denoizing is evaluated using the mother wavelet as a preprocessing step for feature extraction and classification.

Saturation Effect Produced by Laser Pulses: Karplus–Schwinger Approach versus Bloch Solution

The saturation effect during the excitation of a two-level system by laser pulses is investigated in the framework of two approaches: excitation probability based on Karplus–Schwinger spectral profile and exact solution of Bloch equations. Simple analytical expression for the excitation probability by exponential pulse is derived. The excitation spectra obtained using this expression were compared with the result of solving the Bloch equations for various values of the pulse duration and the Rabi frequency, which describes the strength of the electromagnetic interaction. It is shown that in the case of long pulses, there is a satisfactory correspondence between the two approaches, but in short-pulse limit and strong saturation, the probability description based on Karplus–Schwinger spectral profile and perturbation theory does not provide satisfactory results.

A Mathematical Study of a Semiconducting Thermoelastic Rotating Solid Cylinder with Modified Moore–Gibson–Thompson Heat Transfer under the Hall Effect

This research aims to investigate photo-thermoelastic interactions in a rotating infinite semiconducting solid cylinder under a high magnetic field acting along its axis with the Hall current effect. The boundary surface is subjected to a variable heat flux generated by an exponential laser pulse. The governing equations are expressed using a new photo-thermoelastic model generalized in the Moore–Gibson–Thompson photo-thermal (MGTPT) heat transfer model for a semiconducting medium. The Moore–Gibson–Thompson (MGT) equation is obtained by introducing a thermal relaxation parameter into the Green–Naghdi (GN III) model. The Laplace transform is utilized to determine the mathematical expressions for the components of displacement, carrier density, temperature field, and thermal stresses in the transformed domain. The numerical inversion technique is used to obtain the expressions in the physical domain. The impacts of thermal relaxations, different theories of thermoelasticity, the Hall current, and rotation on the displacement, temperature, thermal stresses, and carrier density are represented graphically using MATLAB software.

Experiments on an AM Mode-Locked Laser as an Arbitrary Optical Function Generator

We show experimentally that various optical pulses can be generated from an AM mode-locked laser by employing a 10 GHz harmonically and regeneratively mode-locked erbium fiber laser. A software-controlled liquid crystal on silicon (LCoS) optical filter device, which can control the amplitude and phase of the input signal as a function of optical frequency, was employed to implement a specific filter function. The filter was characterized by the Fourier transformed spectral profile <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$A(\omega )$ </tex-math></inline-formula> of the output pulse <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$a(t)$ </tex-math></inline-formula> , <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$A(\omega +\Omega _{m}), $ </tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$A(\omega -\Omega _{m})$ </tex-math></inline-formula> . Here, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Omega _{m}$ </tex-math></inline-formula> is the AM modulation angular frequency. The filter resolution was set at 10 GHz. By installing a specific filter in the laser cavity, we succeeded in generating various pulses such as Gaussian, secant hyperbolic (sech), double-sided and single-sided exponential, parabolic, triangular, and Nyquist pulses with an arbitrary roll-off factor as with an optical function generator. It is interesting to note that we could experimentally generate very precise transform-limited (TL) optical pulses, which were originally designed by calculating the filter function. The generated spectral profile agreed well with the numerical results even below −40 dB, which also agreed with the theory. As we have shown theoretically, we could generate sech and parabolic pulses without fiber nonlinearity. An asymmetric single-sided pulse can also be generated by incorporating a complex filter function with phase information, where a small amount of phase rotation of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\sim \pi $ </tex-math></inline-formula> /60 in each round trip played an important role in generating the asymmetric pulse. Without the phase change, the pulse became symmetric and was no longer the designed pulse. A clean triangular pulse was difficult to generate since parabolic pulse shaping on the top of a sinusoidal intensity modulation is ineffective in creating a sharp peak.

Experiments on an FM Mode-Locked Laser as an Arbitrary Optical Function Generator

We describe experimentally that an FM mode-locked laser can generate various optical pulses such as Gaussian, secant hyperbolic (sech), double-sided exponential, rectangular, parabolic, triangular, and Nyquist pulses like an optical function generator. The experiments were carried out by employing a 10 GHz actively FM mode-locked erbium fiber laser, where a specific filter was installed in the laser cavity. The specific filter was characterized by the Fourier transformed spectrum <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$A(\omega )$ </tex-math></inline-formula> of an output pulse <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$a(t)$ </tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$A(\omega $ </tex-math></inline-formula> + <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$n\Omega _{m})$ </tex-math></inline-formula> with <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$n=- \infty \sim + \infty $ </tex-math></inline-formula> . Here, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Omega _{m}$ </tex-math></inline-formula> is the angular modulation frequency. We employed a software-controlled liquid crystal on silicon (LCoS) optical filter, which can control the amplitude and the phase of the input signal as a function of optical frequency. Therefore, we were able to generate various optical pulses by simply changing the filter shape using the software. The filter resolution was 10 GHz. The generated optical pulses agreed well with the theory, where the spectral profile even below −40 dB coincided well with the theoretical profile. We proved experimentally from the product of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\Delta \nu \Delta \tau $ </tex-math></inline-formula> at −3 dB that the output pulses have none of the frequency chirp that would inevitably occur with conventional FM mode-locking. It was not possible to generate an asymmetric single-sided pulse as we pointed out theoretically. We were also able to generate parabolic and triangular intensity pulses as we predicted in a previous paper. Finally, we compared the possibilities of generating various pulses with AM and FM mode-locking techniques.