Transmission Electron Microscopy Experiments Research Articles

Mechanism of Electron-Beam-Induced Structural Degradation in ZIF-8 and its Electron Dose Tolerance.

Zeolitic-imidazolate frameworks (ZIFs) are crystalline microporous materials with promising potential for gas adsorption and catalysis application. Further research advances include studies on integrating ZIFs into nanodevice concepts. In detail for the application, e.g., electron-beam-assisted structural modifications or patterning, there is a need to understand potential structural degradation processes caused by such electron beams. Advanced transmission electron microscopy (TEM) has demonstrated its ability to study structures at the nanoscale. Here, we systematically investigated electron-beam-induced loss in crystallinity in ZIF-8 under various experimental conditions, using as measure the attenuation of the relative intensity and the relative displacement of electron diffraction Bragg planes with increasing cumulative electron dose. The {110} Bragg planes reflect the overall stability of the ZIF-8 unit-cell structure, while the {431} Bragg planes assess the stability of its micropore structure. We considered a relative loss of Bragg plane intensity of 37% as the threshold for determining the critical electron dose, which varied for different Bragg planes, with 35.6 ± 8.4 e-Å-2 for {110} and 11.4 ± 3.0 e-Å-2 for {431}. However, the critical dose per breakage of N-Zn bonds in a ZnN4 tetrahedra per different Bragg plane was found to be ∼3 e-Å-2, which indicates continuous, simultaneous breakage of N-Zn bonds throughout the crystal, confirming radiolysis as the dominant damage mechanism. In addition, we investigated the effects of TEM experiment parameters, including acceleration voltage, electron dose rate, cryogenic sample temperature, in situ sample drying, and change in conductivity of the sample substrate (e.g., graphene). Our results unravel the degradation mechanisms in ZIF-8 and provide threshold parameters for maximizing resolution in electron-beam-assisted experiments and processes.

Manipulating the decomposition kinetics of a mixed carbide through small compositional adjustments

Mixed (Ti,Zr)C offers significantly higher hardness compared to its monocarbide constituents owing to solid solution hardening. However, the (Ti,Zr)C system has a miscibility gap in which the carbide can decompose into TiC-rich and ZrC-rich phases at high temperature. This limits the utilization of (Ti,Zr)C, where structural stability at high temperatures is sought, but we here show, using in-situ neutron diffraction during aging at 1600 °C, how small additions of other carbides can significantly retard the decomposition. The effect on decomposition kinetics by addition of 1mol% HfC or NbC is shown and thermodynamics calculations and scanning transmission electron microscopy experiments aid to propose that the altered decomposition kinetics can stem from a narrower miscibility gap and altered interface chemistry. Although the decomposition morphology suggests that phase separation proceeds through discontinuous precipitation, we find that only the TiC-rich decomposition product nucleates with a composition far from equilibrium and evolves with time.

TCONS_00025035-miR-101-UROS is potentially involved in the regulation of heme synthesis pathway and influences mantle melanin deposition by targeting porphyrin in Manila clam (Ruditapes philippinarum)

Shell color is an important economic trait and one of the target traits in breeding and production. Non-coding RNA (ncRNA) refers to RNA molecules transcribed from the genome and do not encoding proteins, which can regulate the expression of target genes after transcription and participate in the regulation of many important traits, such as the formation of shell color and body color. In this study, we detected the porphyrins in the shells of three Manila clams with different shell colors, explored the expression pattern and function of Uroporphyrinogen III synthetase (UROS) in the shell color pigmentation of Ruditapes philippinarum, and found that it might be involved in the synthesis of porphyrins and potentially in the synthesis of melanin. The results showed that the expression levels of heme synthesis-related genes such as UROS, Uroporphyrinogen decarboxylase (UROD), Ferrochelatase (FECH), Hephaestin (HEPH), and pigment synthesis-related genes (Peroxidasin PXDN) in the positive group were significantly reduced compared with the control group after injection of UROS dsRNA, indicating that UROS plays a crucial role in the porphyrin synthesis pathway. Additionally, transmission electron microscopy and melanin extraction experiments also proved that it might participate in the synthesis of melanin. We further explored and verified the relationship between TCONS_00025035-miR-101-UROS and identified the changes in the expression level of UROS through RNA interference and injection of miR-101 antagomir, respectively. Our results imply that miR-101 antagonists affect the expression of UROS. Furthermore, dual-luciferase reporter gene experiments confirmed the relationship between TCON_00025035, miR-101, and UROS. The regulatory relationship between TCONS_00025035 and miR-101 is negative, and the regulatory relationship between miR-101 and UROS is also negative. In summary, we verified the function of UROS through RNA interference, qPCR, in situ hybridization, and melanin content detection. We speculated that there was a negative relationship between miR-101 and UROS, and there was also a negative relationship between TCONS_00025035 and miR-101. TCONS_00025035 might regulate UROS through the regulation of miR-101, and UROS might also regulate other pigmentation-related genes and affect the formation of pigments, thereby influencing porphyrin and melanin formation in Manila clam.

Accurate quantification of dislocation loops in complex functional alloys enabled by deep learning image analysis

In-depth statistics of individual defects observed during transmission electron microscopy (TEM) experiments are essential for the thorough characterization of materials. In this study, we aim to quantitatively characterize the population of dislocation loops in ion-irradiated CrFeMnNi alloys. To this end, we propose an efficient guideline to prepare TEM micrographs dataset for deep learning analysis, adapted for accurate characterization of microstructures produced by thousands of overlapping defects, a very common situation in TEM images, unfeasible by previous existing methods. To reduce human effort, we annotate only a few images and complement the database through a two-step process: initially, singular value decomposition to normalize image background, followed by a controlled data augmentation. The performed analysis provides precise quantitative information about the number of loops of different types, as well as their spatial distribution, their size, and the inter-object distances. These characteristics provide insights into the nucleation, mobility, and growth of dislocation loops, as well as the elastic anisotropy of the material. Our results emphasize how accurate analysis of complex microstructures can provide insights into the physical properties of materials and open up many perspectives for attaining quantitative information on materials properties based solely on their image analysis.

Effect of heat treatment on wear resistance of cold-sprayed Ti-diamond composite coating

In order to enhance the wear resistance of cold-sprayed Ti coatings, Ti-diamond (Ti-MD) composite coatings were fabricated, followed by heat treatment at different temperatures. The effects of heat treatment temperature on the wear resistance of the composite coatings were assessed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), microhardness testing, and wear resistance experiments. The results show that the composite coating undergo no phase transformation after heat treatment, and exhibits higher microhardness and improved wear resistance. The porosity results showed that the porosity of the coating decreased as the heat treatment temperature increases. TEM results showed that stable TiC (about 10 nm) was formed at the interface between the titanium and diamond particles after heat treatment at 800 °C, and nanoindentation results showed that the heat-treated coating had higher deformation resistance. Specifically, when the heat-treated temperature rose to 800 °C, the composite coating exhibits an 80 % reduction in wear rate, primarily attributable to the decreased porosity of the coating and the enhanced adhesion between Ti and diamond particles. The wear mechanisms of the heat-treated coatings are predominantly reduced oxidative and abrasive wear.

Two novel antimicrobial peptides P33-57 and mP168-187 from zebrafish showing potent antibacterial activities

It is known that overuse or abuse of antibiotics has undoubtedly accelerated the global antibiotic resistance crisis, and long-time use of antibiotics may have adverse effects on the health of animal, human, and ecosystem. Therefore, it is necessary to find antibiotic alternatives that can be used in aquaculture and are non-toxic to the human. Here we clearly demonstrated that both the PH and FYVE domain of Plekhf2 in zebrafish have antibacterial properties and can interact with PGN in this study. Therefore, we screened four candidate peptides from the two domains. It was demonstrated that P152-172 and P168-187 had no obvious antibacterial activities, while P33-57 and mP168-187 had strong antibacterial activities, which may be used as antimicrobial peptides. Additionally, transmission electron microscopy experiment revealed that P33-57 and mP168-187 can destroy the cell wall of bacteria, thereby directly killing bacteria. Importantly, it was found that P33-57 and mP168-187 had no hemolysis to red blood cells and lacked cytotoxicity. In summary, P33-57 and mP168-187could be seen as antibacterial activity centers of PLEKHF2 and may be promising antimicrobial peptides to combat bacterial infections facing an antibiotic-resistance crisis.

Novel Piperazine Based Compounds Target Alzheimer's Disease Relevant Amyloid β42 and Tau Derived Peptide AcPHF6, and the Lead Molecule Increases Viability in the Flies Expressing Human Tau Protein.

Alzheimer's disease (AD) is the leading form of dementia in the United States and the world. The pathophysiology of AD is complex and multifaceted. Accumulation of senile plaques and neurofibrillary tangles (NFTs) are hallmarks of AD. The aggregation of amyloid β (senile plaques) and tau tangles (NFTs) results in the death of neurons in the cortex and hippocampus, which manifests itself in cognitive decline and memory loss. Current therapies rely on conventional approaches that have only treated the underlying symptoms without disease modification. Data from clinical studies point to a complex role of amyloid β (Aβ) in a way that enhances the tau phenotype throughout the disease process. To address the co-pathogenic role of Aβ and tau, we undertook development of multitarget compounds aiming at both tau and Aβ to slow or stop disease progression and provide neuroprotection. Here, we demonstrate a dose-dependent effect of the novel test compounds that inhibit aggregation of AcPHF6 (a shorter version of tau protein) and Aβ1-42 peptides in thioflavin T fluorescent assays. The compounds were also shown to disaggregate preformed aggregates dose dependently. To further validate these findings, circular dichroism experiments were carried out to examine the nature of inhibition. Additionally, transmission electron microscopy experiments were carried out to gain insights into the morphologies of aggregates obtained from dose-dependent inhibition of AcPHF6 and Aβ1-42 as well as dissociation of preformed aggregates from these peptides. Compounds D-687 and D-688 reversed Aβ1-42 induced toxicity in SH-SH5Y cells, significantly demonstrating neuroprotective properties. Finally, in a study with Drosophila melanogaster expressing human tau protein isoform (2N4R) in all the neurons, compound D-688 significantly increased the survival of flies compared to vehicle treated controls. Future studies will further examine the neuroprotective properties of these lead compounds in various animal models.

Microheater Controlled Crystal Phase Engineering of Nanowires Using In Situ Transmission Electron Microscopy

AbstractCrystal Phase Quantum Dots (CPQDs) offer promising properties for quantum communication. How CPQDs can be formed in Au‐catalyzed GaAs nanowires using different precursor flows and temperatures by in situ environmental transmission electron microscopy (ETEM) experiments is studied. A III‐V gas supply system controls the precursor flow and custom‐built micro electro‐mechanical system (MEMS) chips with monocrystalline Si‐cantilevers are used for temperature control, forming a micrometer‐scale metal–organic vapor phase epitaxy (µMOVPE) system. The preferentially formed crystal phases are mapped at different precursor flows and temperatures to determine optimal growth parameters for either crystal phase. To control the position and length of CPQDs, the time scale for crystal phase change is investigated. The micrometer size of the cantilevers allows temperature shifts of more than 100 °C within 0.1 s at the nanowire growth temperature, which can be much faster than the growth time for a single lattice layer. For controlling the crystal phase, the temperature change is found to be superior to precursor flow, which takes tens of seconds for the crystal phase formation to react. This µMOVPE approach may ultimately provide faster temperature control than bulk MOVPE systems and hence enable engineering sequences of CPQDs with quantum dot lengths and positions defined with atomic precision.

Neuromolecular and behavioral effects of cannabidiol on depressive-associated behaviors and neuropathic pain conditions in mice

Background and aimsNeuropathic pain (NP) has a high incidence in the general population, is closely related to anxiety disorders, and has a negative impact on the quality of life. Cannabidiol (CBD), as a natural product, has been extensively studied for its potential therapeutic effects on symptoms such as pain and depression (DP). However, the mechanism of CBD in improving NP with depression is not fully understood. MethodsFirst, we used bioinformatics tools to deeply mine the intersection genes associated with NP, DP, and CBD. Secondly, the core targets were screened by Protein-protein interaction network, Gene Ontology, Kyoto Encyclopedia of Genes and Genomes analysis, molecular docking and molecular dynamics simulation. Next, the effects of CBD intervention on pain and depressive behaviors in the spinal nerve ligation (SNL) mouse model were evaluated using behavioral tests, and dose-response curves were plotted. After the optimal intervention dose was determined, the core targets were verified by Western blot (WB) and Quantitative Polymerase Chain Reaction (qPCR). Finally, we investigated the potential mechanism of CBD by Nissl staining, Immunofluorescence (IF) and Transmission Electron Microscopy (TEM). ResultsA total of five core genes of CBD most associated with NP and DP were screened by bioinformatics analysis, including PTGS2, GPR55, SOD1, CYP1A2 and NQO1. Behavioral test results showed that CBD by intraperitoneal administration 5 mg/kg can significantly improve the pain behavior and depressive state of SNL mice. WB, qPCR, IF, and TEM experiments further confirmed the regulatory effects of CBD on key molecules. ConclusionIn this study, we found five targets of CBD in the treatment of NP with DP. These findings provide further theoretical and experimental basis for CBD as a potential therapeutic agent.

Study on Friction Properties of CNTs/AlSi10Mg Composites

Abstract The purpose of this study was to explore the effect of eutectic silicon particle size on the properties of composites of carbon-nano tubes (CNTs) and AlSi10Mg prepared by powder metallurgy. The samples were studied using light microscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, friction tests and tensile experiments. The effects of short-term heat treatment (540 °C solid solution for 1 h 175 °C aging for 4, 5, and 6 h) on the microstructure, tribological properties and tensile properties of the CNTs/AlSi10Mg composites were investigated. The results showed that the composite material showed an obvious toughening effect after 1 h of solid solution treatment and 4 h of aging, and the elongation increased by 33 %. Adding CNTs can improve the friction performance of the material. The composite material has the best friction performance when aged for 5 h. After a short heat treatment, the eutectic silicon is homogenized in the α-Al matrix, and the eutectic network is broken. The eutectic silicon becomes rounded from the lath shape. The spheroidized structure reduces stress concentrations around silicon particles and improves the friction performance of the composite material.

Participation of strong charge-assisted hydrogen bonds in interactions of dissolved organic matter represented by Suwannee River Humic Acid

Terrestrial dissolved organic matter (DOM) plays critical roles in many biotic and abiotic environmental reactions as well as in water treatment. Its structure is therefore of great interest. We examined dissolved Suwannee River Humic Acid (HA) to probe the potential participation of exceptionally strong, negative charge-assisted hydrogen bonds, (−)CAHB, in DOM cohesion and interaction with small weak acids using high performance size exclusion chromatography (HPSEC), transmission electron microscopy, zeta-pH curves, and pH drift experiments. The results support a previously proposed two-tier state of aggregation, in which tightly-knit primary particles (≤ ∼10 kDa) form larger secondary aggregates (up to micrometer in size). Evidence for (−)CAHB is gained through zeta potential changes and pH drift experiments. The primary particles interact with (−)CAHB-capable solutes (simple carboxylic acids and phosphate) but not (−)CAHB-incapable solutes. We identified disruption of intra-segmental and inter-molecular (−)CAHB leading to swelling and disaggregation, as well as formation of nouveau (−)CAHB with free groups on HA. The effects were solute-concentration dependent and greater at pH 5 than pH 6, consistent with CAHB theory. Phosphate induced the greatest shifts in the HPSEC molecular size distribution curves. The shifts were unaffected by prior stripping of innate polyvalent metals. We conclude that the (−)CAHB contributes to the cohesion of DOM, affecting its size and charge, and provides a means by which weak acid pollutants, nutrients, and natural compounds can interact with DOM. Such interactions have implications for the behavior of DOM in the environment, the fate and transport of anthropogenic pollutants, and the roles DOM play in water treatment technologies.

Operando electrical biasing TEM experiments of Ge-rich GST thin films with FIB sample preparation

Ge-Sb-Te (GST) ternary alloy is the core material for phase-change memory (PCM). Compared with Ge2Sb2Te5 (GST-225), Ge-rich GST (GGST) has a higher crystallization temperature (about 400°C) and thereby an improved thermal stability. In this paper, we propose a methodology dedicated to studying the phase changes by operando transmission electron microscopy (TEM). The methodology combines focused ion beam (FIB) specimen preparation and injection of electrical pulses for in-situ studies. We show how the microstructure is correlated to the electrical switching dynamics in GGST nanobridges. The electrical pulse modification, the electrochemical migration, local current density, void formation and the corresponding switching mechanism are discussed.

Wafer-scale bonded GaN–AlN with high interface thermal conductance

Wide and ultrawide bandgap semiconductors, such as GaN, play a crucial role in high-power applications, yet their performance is often constrained by thermal management challenges. In this work, we introduce a high-quality interface between GaN and AlN, prepared through wafer-scale bonding and verified via high-resolution transmission electron microscopy and transport experiments. We experimentally measured the thermal boundary conductance of the GaN–AlN interface, achieving up to 320 MW/m2K at room temperature using an ultrafast optical technique and sensitivity examinations. Non-equilibrium atomistic Green's functions and density functional theory simulations were conducted to model the interface phonon modes and their contributions to thermal transport, demonstrating good agreement with the experimental results from 80 to 300 K. Additionally, we observed a size-dependent effect on the thermal boundary conductance related to the GaN film thickness from 180 to 450 nm, which we attributed to quasi-ballistic thermal transport through molecular dynamics simulations. Our study has demonstrated a scalable processing route for wafer-sized chip packaging and provides fundamental insights to mitigate near-junction thermal resistance. Further exploration of interface engineering could facilitate co-design strategies to advanced thermal management technologies.

Melatonin regulates microglial M1/M2 polarization via AMPKα2-mediated mitophagy in attenuating sepsis-associated encephalopathy

BackgroundSepsis-associated encephalopathy (SAE) is a disease characterized by neuroinflammation and cognitive dysfunction caused by systemic infection. Inflammation-induced microglial activation is closely associated with neuroinflammation in SAE. It is widely understood that melatonin has strong anti-inflammatory and immunomodulatory properties beneficial for sepsis-related brain damage. However, the mechanism of melatonin action in SAE has not been fully elucidated. MethodsThe SAE cell model and SAE mouse model were induced by lipopolysaccharide (LPS). Behavioral tests were performed to analyze cognitive function. Microglial markers and M1/M2 markers were measured by immunofluorescence. Mitophagy was assessed by western blot, mt-Keima and transmission electron microscopy experiments. Immunoprecipitation and co-immunoprecipitation assays investigated the interactions between AMP-activated protein kinase α2 (AMPKα2) and PTEN-induced putative kinase 1 (PINK1). ResultsMelatonin suppresses LPS-induced microglia M1 polarization by enhancing mitophagy, thereby attenuating LPS-induced neuroinflammation and behavioral deficits. However, inhibition or knockdown of AMPKα2 can inhibit the enhancement of melatonin on mitophagy, then weaken its promotion of microglia polarization towards M2 phenotype, and eliminate its protective effect on brain function. Furthermore, melatonin enhances mitophagy through activating AMPKα2, promotes PINK1 Ser495 site phosphorylation, and ultimately regulates microglial polarization from M1 to M2. ConclusionsOur findings demonstrate that melatonin facilitates microglia polarization towards M2 phenotype to alleviate LPS-induced neuroinflammation, primarily through AMPKα2-mediated enhancement of mitophagy.

Probing phonon focusing, thermomechanical behavior, and moiré patterns in van der Waals architectures using surface acoustic waves

Surface acoustic waves (SAWs) propagate along solid-air, solid-liquid, and solid-solid interfaces. Their characteristics depend on the elastic properties of the solid. Combining transmission electron microscopy (TEM) experiments with molecular dynamics (MD) simulations, we probe atomic environments around intrinsic defects that generate SAWs in vertically stacked two-dimensional (2D) bilayers of MoS2. Our joint experimental-simulation study provides insights into SAW-induced structural and dynamical changes and thermomechanical responses of MoS2 bilayers. Using MD simulations, we compute mechanical properties from the SAW velocity and thermal conductivity from thermal diffusion of SAWs. The results for Young’s modulus and thermal conductivity of an MoS2 monolayer are in good agreement with experiments. The presence of defects, such as nanopores which generate SAWs, reduces the thermal conductivity of 2D-MoS2 by an order of magnitude. We also observe dramatic changes in moiré patterns, phonon focusing, and cuspidal structures on 2D-MoS2 layers.

Microstructural modifications induced by He implantation at elevated temperature in AlN

The elastic strain and damage build-ups induced by 50 keV He implantations at elevated temperature in (0001)AlN were studied using a combination of X-ray diffraction, transmission electron microscopy and elastic recoil detection analysis experiments. No long-range migration of He atoms occurs up to 700°C. The point defect recombination is found to be enhanced with the increase of implantation temperature. When He concentration exceeds a determined temperature-dependent threshold, the stabilization of vacancies through the formation of He-vacancy clusters of critical size strongly enhances the interstitial concentration and elastic strain in proportion with the local He concentration. Above this threshold, for a critical He concentration that decreases from several at% at room temperature to a few tenths of at% at 700°C, bubbles form and induce a strong increase of disorder. Specific features observed at 700°C, including the systematic superimposition of bubble clusters with basal stacking faults, suggest the triggering between 550 and 700°C of a mechanism promoting disorder, which is discussed.

Multiple semi-coherent particles strengthened ultra-fine-grained Al composites for neutron shielding materials

Neutron shielding materials face imbalanced behaviors among shielding, strength, and ductility properties. Based on the requirement of the high property shielding particles, a superior semi-coherent τ(Al4MgGd) phase was designed and predicted by cluster expansion (CE) method using density functional theory calculations. To realize its shielding property, the Powder Metallurgy-based routines (i.e., powder fabrication, spark plasma sintering, and hot extrusion techniques) are used to fabricate 6TiB2/Al-6Mg-5Gd (wt.%) composite with dispersed refined τ phases and homogenized TiB2 distribution. The atomic structure of ternary phase τ is examined by aberration-corrected high-angle annual dark-field (HAADF) scanning transmission electron microscope (STEM) and energy dispersive X-ray spectroscopy (EDXS) STEM experiments, which is well complied with the calculated compound (Al4MgGd). In detail, the τ(Al4MgGd) phase has a semi-coherent interface both with α-Al and TiB2, which is consistent with the prediction of interface relationships. With the optimized interfaces, the TiB2 and τ phases can effectively promote recrystallization and suppress grain growth, leading to the formation of ultra-fine grain structure. Then, the composite exhibits advanced shielding properties (Macroscopic transmission cross section ∼24.1 /cm, higher than 30 %B4C/Al) and optimized synergic mechanical properties (Ultimate tensile strength ∼506 MPa, elongation ∼12.9 %), which are far higher than available Al-based neutron shielding materials. Finally, the underlying strength-ductility mechanisms are discussed. Critically, the design and optimization of shielding particle interfaces are reliable strategies for developing novel structural-functional integrated materials.

Ferulic Acid Dimers as Potential Antiviral Agents by Inhibiting TMV Self-Assembly.

A series of ferulic acid dimers were designed, synthesized, and evaluated for anti-TMV activity. Biological assays demonstrated that compounds A6, E3, and E5 displayed excellent inactivating against tobacco mosaic virus (TMV) with EC50 values of 62.8, 94.4, and 85.2 μg mL-1, respectively, which were superior to that of ningnanmycin (108.1 μg mL-1). Microscale thermophoresis indicated that compounds A6, E3, and E5 showed strong binding capacity to TMV coat protein with binding affinity values of 1.862, 3.439, and 2.926 μM, respectively. Molecular docking and molecular dynamics simulation revealed that compound A6 could firmly bind to the TMV coat protein through hydrogen and hydrophobic bonds. Transmission electron microscopy and self-assembly experiments indicated that compound A6 obviously destroyed the integrity of the TMV particles and blocked the virus from infecting the host. This study revealed that A6 can be used as a promising leading structure for the development of antiviral agents by inhibiting TMV self-assembly.

Defect-mediated structural phase transition in Ta2NiSe5 visualized via in situ TEM

Extensive experimental and theoretical efforts have been devoted to elucidating the origin of either structural or electronic instability in the formation of excitonic state in Ta2NiSe5, whereas the effects of lattice defects on actual structural phase transition in Ta2NiSe5 remain elusive. Here, we perform in situ transmission electron microscopy (TEM) experiments to investigate the structural phase transition of Ta2NiSe5 thin films, with a particular focus on the influence of microstructural features and lattice defects on the phase transition. In the cyclic in situ heating-cooling TEM experiments, we track the reversible orthorhombic to monoclinic (vice versa) phase transitions via twinning variant contrast in TEM images and via changes in reflection splitting in diffraction patterns. We further investigate the effects of dislocations and grain boundaries on the phase transition of Ta2NiSe5 thin films. Our findings reveal that individual dislocations can inhibit the transition from monoclinic to orthorhombic phases while simultaneously promoting the reverse transition from orthorhombic to monoclinic phases. Furthermore, we observe a phenomenon of metastable to stable phase transition within grain-boundary-confined regions of Ta2NiSe5 thin films. These in situ TEM observations offer a comprehensive microscopic perspective on defect-mediated phase transitions in Ta2NiSe5. This insight may extend to other varieties of transition-metal chalcogenides, thus implying a broader applicability.

Kuwanon C inhibits proliferation and induction of apoptosis via the intrinsic pathway in MDA-MB231 and T47D breast cancer cells

Breast cancer ranks as the most prevalent malignancy, presenting persistent therapeutic challenges encompassing issues such as drug resistance, recurrent occurrences, and metastatic progression. Therefore, there is a need for targeted drugs that are less toxic and more effective against breast cancer. Kuwanon C, an isoamylated flavonoid derived from mulberry resources, has shown promise as a potential candidate due to its strong cytotoxicity against cancer cells. The present study focused on investigating the anticancer activity of kuwanon C in two human breast cancer cell lines, MDA-MB231 and T47D cells. MTS assay results indicated a decrease in cell proliferation with increasing concentrations of kuwanon C. Furthermore, kuwanon C upregulated the expression levels of the cyclin-dependent kinase inhibitor p21 and effectively inhibited cell DNA replication and induced DNA damage. Flow cytometry confirmed that kuwanon C induced cell apoptosis and upregulated the expression levels of pro-apoptotic proteins (Bax and c-caspase3). Additionally, it stimulated the production of reactive oxygen species (ROS) in the cells. Transmission electron microscopy and Fluo-4 AM-calcium ion staining experiments provided insights into the endoplasmic reticulum (ER), revealing that kuwanon C induced ER stress. Kuwanon C upregulated the expression levels of unfolded protein response-related proteins (ATF4, GADD34, HSPA5, and DDIT3). Overall, the present findings suggested that kuwanon C exerts a potent inhibitory effect on breast cancer cell proliferation through modulating of the p21, induction of mitochondrial-mediated apoptosis, activation of ER stress and induction of DNA damage. These results position kuwanon C as a potential targeted therapeutic agent for breast cancer.