Exciton Utilization Research Articles

Pure room temperature phosphorescence emission in nondoped OLEDs: adjustable oxidation states and excited-state modulation.

Purely organic room temperature phosphorescence (RTP) materials are a new kind of triplet emitter, which can harvest both singlet and triplet excitons in theory, thus showing great application potential for organic light-emitting diodes (OLEDs). However, nondoped OLEDs based on RTP emitters have been rarely explored owing to challenges in realizing efficient phosphorescence in single-component systems. Herein, three donor-acceptor-type luminogens were designed and synthesized in which phenothiazine, with different oxidation degrees, acted as the electron donor and acetophenone as the acceptor. The adjustable oxidation states of phenothiazine enabled the modulation of excited states, facilitating the transition from dual RTP and thermally activated delayed fluorescence emissions to pure RTP. A nondoped OLED device was then fabricated based on the pure RTP emitter, achieving a high exciton utilization efficiency of 86%, clearly demonstrating the enhancement of electroluminescence performance through RTP properties.

Efficient Triplet Harvesting via Hot Exciton Utilization in Solution Processed OLEDs Employing Tetraphenyl Buta‐1,3‐Diene Based AIE Emitters

AbstractHigh photoluminescence quantum yield (PLQY) especially in solid‐state together with harvesting radiative triplet excitons are essential to achieve efficient organic light‐emitting diodes (OLEDs). Herein, the aggregation induced emission (AIE) active tetraphenyl buta‐1,3‐diene (TPB) moiety has been employed and tactfully modified to obtain orthogonally oriented donor‐acceptor (D‐A‐π‐A‐D) type derivatives (namely, TPB‐CHO‐TPA and TPB‐CN‐TPA) which possess additionally the hybridized local and charge transfer (HLCT) type excited‐state. Moreover, computational studies have revealed the possibility of triplet harvesting through hot exciton mechanism in these designed emitters. These key features along with excellent solubility in most of the organic solvents have encouraged to utilize these as light emitting materials for solution processed non‐doped and doped OLED devices. The optimal OLED device using TPB‐CHO‐TPA exhibits yellow light emission (ELmax = 572 nm and CIEx,y = 0.48, 0.51) having maximum external quantum efficiency (EQEmax) of 7.6% with power and current efficiency of 6.1 lm W−1 and 8.9 cd A−1 where the calculated exciton utilization efficiency (EUE) approaches to 97%, indicating efficient triplet harvesting in electroluminescence process. This work signifies a novel design strategy for AIE‐based HLCT type emitters having efficient hot exciton utilization which can pave the way for future development of TPB based highly efficient OLED devices.

Achieving Efficient X-ray Scintillation of Purely Organic Phosphorescent Materials by Chromophore Confinement.

Scintillators have attracted significant attention due to their wide-ranging applications in both industrial and medical fields. However, one of the ongoing challenges is the efficient utilization of triplet excitons to achieve high radioluminescence efficiency. Here, a series of purely organic phosphors is presented for X-ray scintillation, employing a combined rigid and flexible host-guest doping strategy. The doped crystals exhibit a remarkable maximum phosphorescence efficiency of 99.4% under UV excitation. Furthermore, upon X-ray irradiation, the radioluminescence intensities of the doped phosphors are markedly higher compared to their single-component crystal counterparts. Through systematic investigations, it is demonstrated the crucial role of confining isolated chromophores in enhancing scintillation efficiency. Additionally, a transparent scintillator screen fabricated with the doped phosphor exhibits excellent X-ray imaging performance, achieving a high spatial resolution of 18.0 lpmm-1. This work not only offers valuable insights into suppressing non-radiative transitions of triplet excitons during scintillation but also opens a new avenue for designing highly efficient purely organic phosphorescent scintillators.

Non-fused nonfullerene acceptors withasymmetric benzo[1,2-b:3,4-b', 6,5-b"]trithiophene (BTT) central donor core and different acceptor terminal units for organic solar cells.

Here in, we have designed two new unfused non-fullerene small molecules based on asymmetric benzo[1,2-b:3.4-b', 6,5-b"]trithiophene (BTT) central donor core and different terminal units, i.e. 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (NFA-4) and 1,3-diethyl-2-thioxodi hydropyrimidine-4,6(1H,5H)-dione (NFA-5) and their optical and electrochemical properties were investigated. Employing a wide band-gap copolymer D18, the binary D18: NFA-4 and D18:NFA-5 bulk heterojunction-based organic solar cells realized an overall power conversion efficiency of about 17.07% and 11.27 %, respectively. The higher value of power conversion efficiency for the NFA-4-based organic solar cells, as compared to the NFA-5 counterpart, is attributed to the enhanced values of short circuit current, open circuit voltage, and fill factor. After the incorporation of NFA-5 into the binary bulk heterojunction D18:NFA-4, the ternary organic solar cells attained a power conversion efficiency of 18.05 %, which is higher than that for the binary counterparts and attributed to the increased values of short circuit current, fill factor, and open circuit voltage. The increased value of short circuit current is associated with the effective utilization of excitons through the energy transfer from the NFA-5 to NFA-4 as the NFA-4 exhibits a more significant dipole moment than the NFA-5 and is effectively dissociated into a free charge carrier.

Dendritic Oligomers‐Based Exciplex Emitters Realizing Solution‐Processed Organic Light‐Emitting Diodes with Nearly 30% External Quantum Efficiency

AbstractDue to the feature of the strong intermolecular interactions causing aggregation‐caused excitons quenching (ACQ) of solution process, realizing high‐performance solution‐processed organic light‐emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) emitters remains a formidable challenge nowadays. To address this issue, herein, a novel strategy is proposed to construct solution‐processable ternary exciplex emitters by utilizing the dendritic oligomer as the substrate, simultaneously realizing excellent solution‐process adaptability, good dispersibility to restrain harmful ACQ, and improved exciton utilization with multiple reverse intersystem crossing channels. Accordingly, dendritic oligomer‐based exciplex systems are constructed by combining small‐molecule donor and acceptor components with the multi‐carbazole‐substituted tetraphenylsilane‐core analog as substrate. And their film morphologies, photoluminescence quantum yields (ΦPLs), and non‐radiative decay rates of triplet excitons (knrTs) are significantly improved. Among them, DMAC‐DPS:PO‐T2T:SimCP3 exhibits the highest ΦPL of 97.5% and the lowest knrT of 1.0 × 103 s−1, and realizes the best maximum external quantum efficiency of 29.7% in solution‐processed OLED, which is comparable with the highest electroluminescence efficiencies of all solution‐processable emitters. Therefore, this work will provide a prospective pathway to develop efficient solution‐processable exciplex emitters and promote the progress of solution‐processed OLEDs.

An efficient thermally activated delayed fluorophore featuring an oxygen-locked azaryl ketone acceptor

Thermally activated delayed fluorescence (TADF) dyes are promising for applications like bioimaging, sensing, and optoelectronic devices due to their efficient exciton utilization without noble metals, making them ideal for organic light-emitting diodes (OLEDs). In this contribution, we introduce a new TADF emitter, 3-(9,9-dimethylacridin-10(9H)-yl)-12H-chromeno[2,3-b]quinolin-12-one (CQLO-DMAC), which incorporates an intramolecular oxygen-locked azaryl ketone acceptor, CQLO. This design enhances molecular rigidity and electron-accepting strength. The CQLO-DMAC compound, featuring a bulky donor, shows significant intramolecular charge transfer and TADF emission. Comprehensive analyses, including spectroscopic studies and theoretical calculations, reveal high luminescence efficiency and reduced non-radiative losses. Utilizing CQLO-DMAC in OLEDs, we achieved a green-yellow emission peak at 548 nm and a maximum external quantum efficiency of 17.4%. The findings highlight the potential of CQLQ as a highly effective acceptor in designing of TADF electroluminescent dyes.

Insights into the Structural Modification of Selenium-Doped Derivatives with Narrowband Emissions: A Theory Study.

The research on boron/nitrogen (B/N)-based multiresonance thermally activated delayed fluorescence (MR-TADF) emitters has been a prominent topic due to their narrowband emission and high luminous efficiency. However, devices derived from the common types of narrowband TADF materials often experience an efficiency roll-off, which could be ascribed to their relatively slow triplet-singlet exciton interconversion. Since inserting the heavy Se atom into the B/N scheme has been a proven strategy to address the abovementioned issues, herein, extensive density functional theory (DFT) and time-dependent DFT (TD-DFT) simulations have been employed to explore the effects of the structural modification on a series of structurally modified selenium-doped derivatives. Furthermore, the two-layered ONIOM (QM/MM) model has been employed to study the pressure effects on the crystal structure and photophysical properties of the pristine CzBSe. The theoretical results found that the introduced tert-butyl units in Cz-BSeN could result in a shorter charge transfer distance and smaller reorganization energy than the parent CzBSe. In contrast to directly incorporating the o-carborane (Cb) unit to CzBSe, incorporating the bridged phenyl units is important in order to achieve narrowband emissions and high luminous efficiency. The lowest three triplet excited states of CzBSe, Cz-BSeN and PhCb-BSeN all contribute to their triplet-singlet exciton conversions, resulting in a high utilization of triplet excitons. The pressure has an evident influence on the photophysical properties of the aggregated CzBSe and is favored for obtaining narrowband emissions. Our work is promised to provide a feasible strategy for designing selenium-doped derivatives with narrowband emissions and rapid triplet-singlet exciton interconversions.

Constructing Organic Phosphorescent Scintillators with Enhanced Triplet Exciton Utilization Through Multi‐Mode Radioluminescence for Efficient X‐Ray Imaging

AbstractThe development of organic phosphorescent scintillators with high exciton utilization efficiency has attracted significant attention but remains a difficult challenge because of the inherent spin‐forbidden feature of X‐ray‐induced triplet excitons. Herein, a design strategy is proposed to develop organic phosphorescent scintillators through thermally activated exciton release to convert stabilized spin‐forbidden triplet excitons to spin‐allowed singlet excitons, which enables singlet exciton‐dominated multi‐mode emission simultaneously from the lowest singlet, triplet, and stabilized triplet states. The resultant scintillators demonstrate a maximum photoluminescence efficiency of 65.8% and a minimum X‐ray radiation detection limit of 110 nGy s−1; this allows efficient radiography imaging with a spatial resolution of ≈10.0 lp mm−1. This study advances the fundamental understanding of exciton dynamics under X‐ray excitation, significantly broadening the practical use of phosphorescent materials for safety‐critical industries and medical diagnostics.

Efficient metal free organic radical scintillators

The development of high-performance metal-free organic X-ray scintillators (OXSTs), characterized by a synergistic combination of robust X-ray absorption, efficient exciton utilization, and short luminescence lifetimes, poses a considerable challenge. Here we present an effective strategy for achieving augmented X-ray scintillation through the utilization of halogenated open-shell organic radical scintillators. Our experimental results demonstrate that the synthesized scintillators exhibit strong X-ray absorption derived from halogen atoms, display efficacious X-ray stability, and theoretically achieve 100% exciton utilization efficiency with a short lifetime (∼18 ns) due to spin-allowed doublet transitions. The superior X-ray scintillation performance exhibited by these organic radicals is not only exploitable in X-ray radiography for contrast imaging of various objects but also applicable in a medical high-resolution micro-computer-tomography system for the clear visualization of fibrous veins within a bamboo stick. Our study substantiates the promise of organic radicals as prospective candidates for OXSTs, offering valuable insights and a roadmap for the development of advanced organic radical scintillators geared towards achieving high-quality X-ray radiography.

High Efficiency Non‐Doped Organic Light Emitting Diodes Based on Pure Organic Room Temperature Phosphorescence by High‐Lying Singlet Exciton Fission

AbstractHeavy‐metal‐free pure organic room temperature phosphorescence (ORTP) holds great potential in the field of organic optoelectronic devices owing to low economic cost, simple preparation techniques, and high exciton utilization. However, it is still filled with challenges in realizing high efficiency organic light‐emitting diodes (OLEDs) and exploring the internal physical mechanism based on these ORTP molecules. Here, a high‐performance OLED induced by an unexpected interfacial spin‐mixing process between the ORTP molecule and interlayers is demonstrated, and the high efficiency electroluminescence (EL) mechanism is studied through magneto–electroluminescence (MEL) and magneto–photoluminescence (MPL) measurements. The steady‐state and transient PL properties imply that the interfacial effect is related to a high‐lying singlet fission (HLSF) process in the ORTP molecule itself. Further, the HLSF process and the corresponding energy level position are confirmed by the incident wavelength‐ and temperature‐dependent PL spectra and the magnetic‐field‐dependent transient PL. Finally, by optimizing the interfacial material adjacent to the emissive layer to utilize this interfacial spin mixing effect, a high‐efficiency non‐doped ORTP‐OLED with external quantum efficiency of 16% and CIE coordinates of (0.27, 0.49) is developed. The proposed mechanism during the EL process will give insight to produce more efficient OLEDs based on ORTP materials in the future.

Efficient Deep-Blue Organic Light-Emitting Diodes Employing Doublet Sensitization.

Fast and efficient exciton utilization is a crucial solution and highly desirable for achieving high-performance blue organic light-emitting diodes (OLEDs). However, the rate and efficiency of exciton utilization in traditional OLEDs, which employ fully closed-shell materials as emitters, are inevitably limited by spin statistical limitations and transition prohibition. Herein, a new sensitization strategy, namely doublet-sensitized fluorescence (DSF), is proposed to realize high-performance deep-blue electroluminescence. In the DSF-OLED, a doublet-emitting cerium(III) complex, Ce-2, is utilized as sensitizer for multi-resonance thermally activated delayed fluorescence emitter ν-DABNA. Experimental results reveal that holes and electrons predominantly recombine on Ce-2 to form doublet excitons, which subsequently transfer energy to the singlet state of ν-DABNA via exceptionally fast (over 108s-1) and efficient (≈100%) Förster resonance energy transfer for deep-blue emission. Due to the circumvention of spin-flip in the DSF mechanism, near-unit exciton utilization efficiency and remarkably short exciton residence time of 1.36µs are achieved in the proof-of-concept deep-blue DSF-OLED, which achieves a Commission Internationale de l'Eclairage coordinate of (0.13, 0.14), a high external quantum efficiency of 30.0%, and small efficiency roll-off of 14.7% at a luminance of 1000cdm-2. The DSF device exhibits significantly improved operational stability compared with unsensitized reference device.

Ultralow Roll-off Thermally Activated Delayed Fluorescent Light-Emitting Diodes Based on Furo[2,3-b]quinoxaline Emitters.

Herein, a Y-type compound (67dMeOTPA-FQ) and a T-type compound (58dMeOTPA-FQ) based on furo[2,3-b]quinoxaline were synthesized. The theory calculation shows the S1 and T1 of both compounds own a charge-transfer feature while their T2 states have a local excitation feature. The calculated kRISC(T2-S1) is one to 2 orders of magnitude larger than kRISC(T1-S1). Thus, the nonadiabatic spin-vibronic mechanism involved in the T2 state is suggested to be responsible for the thermally activated delayed fluorescence (TADF) feature. Meanwhile, when 2-methyl-9,10-bis(naphthalen-2-yl)anthracene is selected as host, the maximum luminance of the device based on 67dMeOTPA-FQ is up to 104215 cd·m-2, and the external quantum efficiency (EQE) keeps in the 8.2-8.0% range with the luminance changed from 55.0 cd·m-2 to 90000 cd·m-2, only 2.4% efficiency roll-off. As for 58dMeOTPA-FQ, a slightly lower EQE of 7.1-6.7% with the luminance range of 1-40000 cd·m-2 was achieved for orange-red emission. Both the reverse intersystem crossing (RISC) and triplet-triplet annihilation mechanisms are supposed to concurrently contribute to the utilization of triplet excitons and suppress the notorious efficiency roll-off observed in TADF-based devices.

Construction of Concentration Quenching‐Resistant Multi‐Resonance TADF Emitters via Positional Isomerization for OLEDs

AbstractMultiple resonance thermally activated delayed fluorescence (MR‐TADF) emitters are promising for high‐definition organic light‐emitting diodes (OLEDs) due to their high exciton utilization and color purity. However, strong interchromophore interactions cause most MR‐TADF emitters with planar structures to aggregate at high doping concentrations, leading to degraded efficiencies. Herein, using benzenesulfonyl‐functionalized dibenzothiophene sulfoximine with steric effects, three MR‐TADF emitters (2SBN, 3SBN, and 4SBN) are synthesized by coupling the classic DtBuCzB skeleton at different sites. Three emitters exhibit green or blue‐green emission with full width at half maximum (FWHM) values less than 29 nm and photoluminescence quantum yields exceeding 90%. OLEDs based on 2SBN, 3SBN, and 4SBN achieve high maximum external quantum efficiency (EQEmax) values of 30.1%, 27%, and 33.8%, respectively, at a 5 wt.% doping concentration. Notably, due to the distorted conformation of 4SBN and suppressed intermolecular interaction, the OLED remains high EQEmax of 28.9% at a doping concentration of 20 wt.%. These results demonstrate the feasibility of molecular design to modulate spatial conformations via positional isomerism to develop MR‐TADF emitters with reduced concentration quenching.

Asymmetric Structural Engineering of Hot-Exciton Emitters Achieving a Breakthrough in Non-Doped BT.2020 Blue OLEDs with a Record 9.5% External Quantum Efficiency.

High-efficiency non-doped deep-blue organic light-emitting diodes (OLEDs) meeting the standard of BT.2020 color gamut is desired but rarely reported. Herein, an asymmetric structural engineering based on crossed long-short axis (CLSA) strategy is developed to obtain three new deep-blue emitters (BICZ, PHDPYCZ, and PHPYCZ) with a hot-exciton characteristic. Compared to 2BuCz-CNCz featuring a symmetric single hole-transport framework, these asymmetric emitters with the introduction of different electron-transport units show the enhancement of photoluminescence efficiency and improvement of bipolar charge transport capacity. Further combined with high radiative exciton utilization efficiency and light outcoupling efficiency, the non-doped OLED based on PHPYCZ exhibits the best performance with an excellent current efficiency of 3.49%, a record-high maximum external quantum efficiency of 9.5%, and a CIE y coordinate of 0.049 approaching the BT.2020 blue point. The breakthrough obtained in this work can inspire the molecular design of deep-blue emitters for high-performance non-doped BT.2020 blue OLEDs.

Rational Design of Organic Emitters with Inverted Singlet-Triplet Gaps for Enhanced Exciton Management.

In organic light-emitting diodes (OLEDs), the pursuit of efficient molecular emitters has led to the development of thermally activated delayed fluorescence (TADF) molecules. While TADF compounds have promising properties, they face challenges such as energy gap constraints and uphill exciton transfer. Inverted emitters (INVEST) offer a novel solution with an inverted singlet-triplet energy (ΔEST) gap, enabling efficient utilization of excitons. This study examines the design and computational analysis of an array of molecules, including 23 INVEST emitters and remaining with positive energy gaps. Within the STEOM-DLPNO-CCSD framework, we explore the role of various molecular fragments in determining ΔEST. We also assess the importance of dynamic spin-polarization (DSP) obtained via the Pariser-Parr-Pople (PPP) scheme in energy gap determination. Exciting trends emerged from our results, with pentalene-containing compounds consistently manifesting negative ΔEST values while their naphthalene counterparts exhibited contrasting behavior. Moreover, we observed a negative DSP correlates with inverted singlet-triplet gaps. Overall, this research advances OLED materials through molecular design and computational analysis, offering avenues for optimizing exciton management and enhancing device performance.

Deep-blue electroluminescence with orthogonal donor-acceptor structure: The role of charge-transfer excited state component in hybrid local and charge-transfer (HLCT) excited state

In this work, three orthogonally bonded phenanthroimidazole based donor-acceptor (D-A) structured blue-emissive materials N-SBPMCN, N-ABPMCN and N-TBPMCN with different donor moieties are designed synthesized. Theoretical combined experimental researches proved that the involving of weak donor (spiro-fluorene and anthracene) and strong donor triphenylamine can form different locally-emissive (LE) dominated hybrid local and charge-transfer (HLCT) excited state, which can contribute to their high photoluminescent quantum yield (PLQY), satisfied electroluminescence performance and blue purity. Specifically, N-TBPMCN with strong donor triphenylamine that possesses more CT excited state components demonstrates the best electroluminescence performance and blue purity among the three materials, revealing that the molecular design of orthogonal D-A structure is of great potential in blue-emissive functional materials. Additionally, we also discovered that intermolecular CT state can also contribute to high exciton utilization.

Hybrid Local and Charge-Transfer Material with Ultralong Room Temperature Phosphorescence for Efficient Organic Afterglow Light-Emitting Diodes.

Organic ultralong room temperature phosphorescence (OURTP) materials capable of combining various emission behaviors for diversified optoelectronic properties and applications have recently gained a vigorous development, but it remains a forbidden challenge in designing OURTP molecules with hybrid local and charge-transfer (HLCT) feature, possibly due to the elevated difficulties in simultaneously meeting the stringent requirements of both HLCT and OURTP emitters. Here, through introducing multiple heteroatoms into one-dimensional fused ring of coumarin with moderate charge transfer perturbation in donor-π-acceptor architecture, we demonstrate a HLCT-featured OURTP molecule showing both promoted fluorescence with a quantum yield of 77% in solution and long-lived OURTP with a lifetime of 251 ms in conventional host material used in electroluminescent device. Thus, efficient OURTP organic light-emitting diodes (OLEDs) were fabricated, exhibiting bright electroluminescence with an exciton utilization efficiency of 85% and yellow OURTP lasting over 2 s for afterglow. Impressively, the HLCT OURTP-OLEDs can be further optimized to reach an unprecedented total external quantum efficiency (EQE) of ~12% and OURTP EQE up to 3.11%, representing the highest performance among the reported OURTP-OLEDs. These impressive results highlight the significance to fuse HLCT and OURTP together in enriching OURTP materials and improving the afterglow OLED performances.

Phosphonium Iodide Featuring Blue Thermally Activated Delayed Fluorescence for Highly Efficient X-Ray Scintillator.

Organic scintillators are praised for their abundant element reserves, facile preparation procedures, and rich structures. However, the weak X-ray attenuation ability and low exciton utilization efficiency result in unsatisfactory scintillation performance. Herein, a new family of highly efficient organic phosphonium halide salts with thermally activated delayed fluorescence (TADF) are designed by innovatively adopting quaternary phosphonium as the electron acceptor, while dimethylamine group and halide anions (I-) serve as the electron donor. The prepared butyl(2-[2-(dimethylamino)phenyl]phenyl)diphenylphosphonium iodide (C4-I) exhibits bright blue emission and an ultra-high photoluminescence quantum yield (PLQY) of 100 %. Efficient charge transfer is realized through the unique n-π and anion-π stacking in solid-state C4-I. Photophysical studies of C4-I suggest that the incorporation of I accounts for high intersystem crossing rate (kISC) and reverse intersystem crossing rate (kRISC), suppressing the intrinsic prompt fluorescence and enabling near-pure TADF emission at room temperature. Benefitting from the large Stokes shift, high PLQY, efficient exciton utilization, and remarkable X-ray attenuation ability endowed by I, C4-I delivers an outstanding light yield of 80721 photons/MeV and a low limit of detection (LoD) of 22.79 nGy ⋅ s-1. This work would provide a rational design concept and open up an appealing road for developing efficient organic scintillators with tunable emission, strong X-ray attenuation ability, and excellent scintillator performance.

Achieving a solar-to-chemical efficiency of 3.6% in ambient conditions by inhibiting interlayer charges transport

Efficiently converting solar energy into chemical energy remains a formidable challenge in artificial photosynthetic systems. To date, rarely has an artificial photosynthetic system operating in the open air surpassed the highest solar-to-biomass conversion efficiency (1%) observed in plants. In this study, we present a three-dimension polymeric photocatalyst achieving a solar-to-H2O2 conversion efficiency of 3.6% under ambient conditions, including real water, open air, and room temperature. The impressive performance is attributed to the efficient storage of electrons inside materials via expeditious intramolecular charge transfer, and the fast extraction of the stored electrons by O2 that can diffuse into the internal pores of the self-supporting three-dimensional material. This construction strategy suppresses the interlayer transfer of excitons, polarizers and carriers, effectively increases the utilization of internal excitons to 82%. This breakthrough provides a perspective to substantially enhance photocatalytic performance and bear substantial implications for sustainable energy generation and environmental remediation.

Boosting External Quantum Efficiency to 12.0 % of an Ultraviolet OLED by Engineering the Horizontal Dipole Orientation of a Hot Exciton Emitter

AbstractCurrently, much research effort has been devoted to improving the exciton utilization efficiency and narrowing the emission spectra of ultraviolet (UV) fluorophores for organic light‐emitting diode (OLED) applications, while almost no attention has been paid to optimizing their light out‐coupling efficiency. Here, we developed a linear donor‐acceptor‐donor (D–A–D) triad, namely CDFDB, which possesses high‐lying reverse intersystem crossing (hRISC) property. Thanks to its integrated narrowband UV photoluminescence (PL) (λPL: 397 nm; FWHM: 48 nm), moderate PL quantum yield (ϕPL: 72 %, Tol), good triplet hot exciton (HE) conversion capability, and large horizontal dipole ratio (Θ//: 92 %), the OLEDs based on CDFDB not only can emit UV electroluminescence with relatively good color purity (λEL: 398 nm; CIEx,y: 0.161, 0.040), but also show a record maximum external quantum efficiency (EQEmax) of 12.0 %. This study highlights the important role of horizontal dipole orientation engineering in the molecular design of HE UV‐OLED fluorophores.