Excimer State Research Articles

Intramolecular benzene excimer formation in 13,14-diphenyldibenzo[b,j][4,7]phenanthroline.

13,14-diphenyldibenzo[b,j][4,7]phenanthroline (DBP3) in various solvents was studied by time-resolved fluorescence and fs transient absorption (fs-TA) spectroscopy. An intramolecular benzene excimer is demonstrated to form within DBP3; it exhibits strong redshifted emission with maximum at 540-640nm. "Intrinsic" fluorescence from DBP3 is dramatically quenched down to τ = 50-400fs in all the solvents studied. Fs-TA and time-resolved fluorescence spectra have proved that relaxed intramolecular benzene excimer is formed from S1 state via hot excimer state with three lifetime components: 50fs, ∼3.5ps, and ∼25ps, which are of the inertial (electronic) and diffusive parts of the relaxation due to solute-solvent interaction. Formation of triplet states via intersystem crossing was observed directly from the upper excited electronic states of DBP3.

Illumination-Induced Solute Uptake in Liquid Crystal Droplets: The Role of 5CB Excimers.

This study investigates the phenomenon of solute uptake into liquid crystal (LC) droplets, illuminated under UV light, focusing on the role of 4-cyano-4'-pentylbiphenyl (5CB) excimer formation in this process. Our experiments reveal that upon UV irradiation solute molecules, including surfactants and dyes, are actively drawn into the LC phase, forming distinctive assemblies within the droplets. Contrary to previous assumptions that the uptake was driven by the direct photoreactivity of the solutes, we found that the 5CB excimer state plays a critical role for this phenomenon. This state, identifiable through its photoluminescence yet invisible to conventional UV/vis absorption spectroscopy, correlates strongly with the molecular assembly process inside of the droplets. Notably, this mechanism operates across a broad spectrum of solute molecules, from simple surfactants like sodium dodecyl sulfate (SDS) to complex dyes, demonstrating the generality of the excimer-induced solute uptake. The excimer's role is pivotal, facilitating solute incorporation without reliance on their inherent light-absorbing properties. This insight not only advances our understanding of LC behavior under light irradiation but also opens new avenues for designing light-responsive materials.

Gold Nanoparticles Modulate Excimer and Exciplex Dynamics of PDDCP-Conjugated Polymers.

How plasmonic nanostructures modulate the behavior of exciplexes and excimers within materials remains unclear. Thus, advanced knowledge is essential to bridge this gap for the development of optoelectronic devices that leverage the interplay between plasmonic and conjugated polymer hybrid materials. Herein, this work aims to explore the role of gold nanoparticles (AuNPs) in modulating exciplex and excimer states within the conjugated polymer poly(2,5-di(3,7-dimethyloctyloxy) cyanoterephthalylidene) (PDDCP), known for its photoluminescent and semi-conductive properties, aiming to create innovative composite materials with tailored optical features. The spectral analysis was conducted to investigate the effects of AuNPs on the PDDCP, varying AuNP volume percentages to measure changes in the absorption profile, molar extinction coefficient (ε), absorption cross-section (σa), and optical bandgap (Eg). Fluorescence spectra of the mixture at different volume ratios were also examined to assess exciplex formation, while amplified spontaneous emission (ASE) profiles were analyzed to study the behavior and photochemical stability of the polymer-NP hybrid material. Increasing AuNP volume induced both blue and red shifts in the absorption profile of the PDDCP. Higher AuNPs concentrations correlated with decreased ε and σa, inversely impacting Eg. The emission spectra obtained at varied AuNP volume ratios indicated significantly enhanced exciplex and excimer formations. The ASE profiles remained consistent but showed reduced intensity with increasing AuNPs concentrations, indicating their influence on hybrid material behavior and stability. The findings suggest that AuNPs affect PDDCP's optical characteristics, altering the absorption profile, bandgap, and fluorescence spectra. Furthermore, the observed reduction in ASE intensity highlights their influence on the behavior and photochemical stability of the hybrid material. These results contribute to a better understanding of the versatile applications of plasmonic-conjugated hybrid polymers.

Distinct vibrational motions promote disparate excited-state decay pathways in cofacial perylenediimide dimers.

A complex interplay of structural, electronic, and vibrational degrees of freedom underpins the fate of molecular excited states. Organic assemblies exhibit a myriad of excited-state decay processes, such as symmetry-breaking charge separation (SB-CS), excimer (EX) formation, singlet fission, and energy transfer. Recent studies of cofacial and slip-stacked perylene-3,4:9,10-bis(dicarboximide) (PDI) multimers demonstrate that slight variations in core substituents and H- or J-type aggregation can determine whether the system follows an SB-CS pathway or an EX one. However, questions regarding the relative importance of structural properties and molecular vibrations in driving the excited-state dynamics remain. Here, we use a combination of two-dimensional electronic spectroscopy, femtosecond stimulated Raman spectroscopy, and quantum chemistry computations to compare the photophysics of two PDI dimers. The dimer with 1,7-bis(pyrrolidin-1'-yl) substituents (5PDI2) undergoes ultrafast SB-CS from a photoexcited mixed state, while the dimer with bis-1,7-(3',5'-di-t-butylphenoxy) substituents (PPDI2) rapidly forms an EX state. Examination of their quantum beating features reveals that SB-CS in 5PDI2 is driven by the collective vibronic coupling of two or more excited-state vibrations. In contrast, we observe signatures of low-frequency vibrational coherence transfer during EX formation by PPDI2, which aligns with several previous studies. We conclude that key electronic and structural differences between 5PDI2 and PPDI2 determine their markedly different photophysics.

Dual Fluorescence and Phosphorescence Emissions from Dye-Modified (NCN)-Bismuth Pincer Thiolate Complexes.

We report the synthesis, characterization, and photophysical properties of four new dye-modified (NCN)Bi pincer complexes with two mercaptocoumarin or mercaptopyrene ligands. Their photophysical properties were probed by UV/vis spectroscopy, photoluminescence (PL) studies, and time-dependent density functional theory (TD-DFT) calculations. Absorption spectra of the complexes are dominated by mixed pyrene or coumarin π → π*/n(pS) → pyrene or coumarin π* transitions. While unstable toward reductive elimination of the corresponding disulfide under irradiation at room temperature, the complexes provide stable emissions at 77 K. Under these conditions, coumarin complexes 2 and 4 exhibit exclusively green phosphorescence at 508 nm. In contrast, the emissive properties of pyrene complexes 1 and 3 depend on the excitation wavelength and on sample concentration. Irradiation into the lowest-energy absorption band exclusively triggers red phosphorescence from the pyrenyl residues at 640 nm. At concentrations c < 1 μM, excitation into higher excited electronic states results in blue pyrene fluorescence. With increasing c (1-100 μM), the emission profile changes to dual fluorescence and phosphorescence emission, with a steady increase of the phosphorescence intensity, until at c ≥ 1 mM only red phosphorescence ensues. Progressive red-shifts and broadening of steady-state excitation spectra with increasing sample concentration suggest the presence of static excimers, as we observe it for concentrated solutions of pyrene. Crystalline and powdered samples of 1 indeed show intermolecular association through π-stacking. TD-DFT calculations on model dimers and a tetramer of 1 support the idea of aggregation-induced intersystem crossing (AI-ISC) as the underlying reason for this behavior.

Magnetic fields reveal signatures of triplet-pair multi-exciton photoluminescence in singlet fission

The photophysical processes of singlet fission and triplet fusion have numerous emerging applications. They involve the separation of a photo-generated singlet exciton into two dark triplet excitons and the fusion of two dark triplet excitons into an emissive singlet exciton, respectively. The role of the excimer state and the nature of the triplet-pair state in these processes have been a matter of contention. Here we analyse the room temperature time-resolved emission of a neat liquid singlet fission chromophore and show that it exhibits three spectral components: two that correspond to the bright singlet and excimer states and a third component that becomes more prominent during triplet fusion. This spectrum is enhanced by magnetic fields, confirming its origins in the recombination of weakly coupled triplet pairs. It is thus attributed to a strongly coupled triplet pair state. These observations unite the view that there is an emissive intermediate in singlet fission and triplet fusion, distinct from the broad, unstructured excimer emission.

Excimer‐Induced Efficient Luminescence by Discrete Intermolecular π–π Stacking of Naphthalimide‐Based Dimer

π–π stacking interactions are generally thought to reduce the luminescence of materials. Here, a systematic investigation is conducted using a π–π stacking dimer with varying steric hindrance substituents as a model to illustrate how π–π stacking structure affects the luminescence efficiency of materials. Four naphthalimide (NI) derivative molecules were designed and synthesized by incorporating sterically hindered unilateral groups to achieve NIPH, NIP1C, NIP2C, and NIP3C. It was figured out that side group modification did affect their crystal packing structures and luminescent properties. On the one hand, the excimer state formed by strongly interacted π−π NI‐based dimer (NIPH and NIP3C) enhances luminescence efficiency compared to the monomer state based on weakly interacted π−π NI‐based dimers (NIP1C and NIP2C). On the other hand, the discrete stacking of NI‐based dimers (NIP3C) further promotes luminescence efficiency compared to the nondiscrete stacking of NI‐based dimers (NIPH). Among these four compounds, NIP3C exhibits discrete stacking of π−π NI‐based dimer due to the large steric hindrance generated by propyl benzene, resulting in the highest photoluminescence quantum efficiency of the NIP3C crystal. This work will provide further insight into the underlying mechanisms behind the high luminescence efficiency induced by π–π dimer stacking.

Unraveling the Origin of Multichannel Circularly Polarized Luminescence in a Pyrene-Functionalized Topologically Chiral [2]Catenane.

Mechanically interlocked molecules (MIMs) are promising platforms for developing functionalized artificial molecular machines. The construction of chiral MIMs with appealing circularly polarized luminescence (CPL) properties has boosted their potential application in biomedicine and the optical industry. However, there is currently little knowledge about the CPL emission mechanism or the emission dynamics of these related MIMs. Herein, we demonstrate that time-resolved circularly polarized luminescence (TRCPL) spectroscopy combined with transient absorption (TA) spectroscopy offers a feasible approach to elucidate the origins of CPL emission in pyrene-functionalized topologically chiral [2]catenane as well as in a series of pyrene-functionalized chiral molecules. For the first time, direct evidence differentiating the chiroptical signals originating from either topological (local state emission) or Euclidean chirality (excimer state emission) in these pyrene-functionalized chiral molecules has been discovered. Our work not only establishes a novel and ideal approach to study CPL mechanism, but also provides a theoretical foundation for the rational design of novel chiral materials in the future.

Unraveling the Origin of Multichannel Circularly Polarized Luminescence in a Pyrene‐Functionalized Topologically Chiral [2]Catenane

AbstractMechanically interlocked molecules (MIMs) are promising platforms for developing functionalized artificial molecular machines. The construction of chiral MIMs with appealing circularly polarized luminescence (CPL) properties has boosted their potential application in biomedicine and the optical industry. However, there is currently little knowledge about the CPL emission mechanism or the emission dynamics of these related MIMs. Herein, we demonstrate that time‐resolved circularly polarized luminescence (TRCPL) spectroscopy combined with transient absorption (TA) spectroscopy offers a feasible approach to elucidate the origins of CPL emission in pyrene‐functionalized topologically chiral [2]catenane as well as in a series of pyrene‐functionalized chiral molecules. For the first time, direct evidence differentiating the chiroptical signals originating from either topological (local state emission) or Euclidean chirality (excimer state emission) in these pyrene‐functionalized chiral molecules has been discovered. Our work not only establishes a novel and ideal approach to study CPL mechanism, but also provides a theoretical foundation for the rational design of novel chiral materials in the future.

Ultrafast Super-Resolution Imaging Exploiting Spontaneous Blinking of Static Excimer Aggregates.

Single-molecule localization methods have been popularly exploited to obtain super-resolved images of biological structures. However, the low blinking frequency of randomly switching emission states of individual fluorophores greatly limits the imaging speed of single-molecule localization microscopy (SMLM). Here we present an ultrafast SMLM technique exploiting spontaneous fluorescence blinking of cyanine dye aggregates confined to DNA framework nanostructures. The DNA template guides the formation of static excimer aggregates as a "light-harvesting nanoantenna", whereas intermolecular excitation energy transfer (EET) between static excimers causes collective ultrafast fluorescence blinking of fluorophore aggregates. This DNA framework-based strategy enables the imaging of DNA nanostructures with 12.5-fold improvement in speed compared to conventional SMLM. Further, we demonstrate the use of this strategy to track the movement of super-resolved DNA nanostructures for over 20 min in a microfluidic system. Thus, this ultrafast SMLM holds great potential for revealing the dynamic processes of biomacromolecules in living cells.

Intermolecular π-π interactions-induced aggregation based on bispyrene for ultrasensitive detection of picric acid (PA) and 2,4-dinitrophenol (DNP)

It was still important to explore excimer emission-based fluorescence probes for nitroaromatics detection by formation or destruction of pyrene excimer with strong emission change. In this work, we have synthesized a simple bis(pyrene) derivative (BisPyH) and studied its optical behavior by using UV–vis and fluorescent spectroscopy. In pure DMSO solution, it emitted a weak blue fluorescence due to the formation of excimer states, on the contrary, the BisPyH in the DMSO/H2O (v/v, 1:1) mixture solution was self-assembled to form aggregates via intermolecular π-π interactions among pyrene units, giving almost 10-fold fluorescence enhancement compared to that in pure DMSO solution. The formed aggregates just offered a perfect platform for the selective detection PA and DNP explosives by quenching the bright green intermolecular-excimer emission in competitive environment. BisPyH exhibited a limit of detection (LOD) towards PA, and DNP as low as 7.32 × 10−8, and 8.11 × 10−8 M, respectively. Subsequently, the fluorescence quenching mechanism was demonstrated by the density functional theory (DFT), UV–vis and fluorescence spectra, SEM, and the quenching constants. Furthermore, filter paper strips and thin-layer chromatography (TLC) plates coated with BisPyH were able to detect PA and DNP in the practical application.

Excimer Fluorescence of Acriflavine Dye in Glycerol and Ethylene Glycol.

This research investigates the excimerisation of acriflavine dye in ethylene glycol and glycerol solvents. Acriflavine, a member of the acridine dye family, exhibits unique fluorescence properties with applications in various fields, including cellular nucleus observation, nucleic acid analysis, and dye laser active media etc. The study explores the impact of solvent and concentration on acriflavine's emission properties, with a focus on excimer formation, which can influence its suitability as a dye laser active medium. UV-Visible absorption spectroscopy reveals concentration-dependent absorption profiles, with distinctive monomer bands. Steady-state fluorescence studies demonstrate the emergence of red-shifted excimer fluorescence bands as concentrations increase in both solvents. Temperature-dependent fluorescence studies reveal the dynamics of excimer formation, suggesting dynamic diffusion as the excimerisation mechanism. Time-resolved fluorescence spectroscopy confirms the singlet character of both monomer and excimer states, providing insights into the excimerisation process. Critical concentration values are determined, representing the equilibrium between monomeric and excimeric forms. The study also explores pH-induced spectral shifts, highlighting the influence of acidity on fluorescence properties. Overall, this research deepens our understanding of acriflavine's excimerisation in ethylene glycol and glycerol, offering insights that can enhance its diverse applications, especially in laser technologies.

Revisiting the benzene excimer using [2,2] paracyclophane model system: Experiment and theory.

We report high-level calculations of the excited states of [2,2]-paracyclophane (PCP), which was recently investigated experimentally by ultrafast pump-probe experiments on oriented single crystals [Haggag et al., ChemPhotoChem 6 e202200181 (2022)]. PCP, in which the orientation of the two benzene rings and their range of motion are constrained, serves as a model for studying benzene excimer formation. The character of the excimer state and the state responsible for the brightest transition are similar to those of the benzene dimer. The constrained structure of PCP allows one to focus on the most important degree of freedom, the inter-ring distance. The calculations explain the main features of the transient absorption spectral evolution. This brightest transition of the excimer is polarized along the inter-fragment axis. The absorption of the light polarized in the plane of the rings reveals the presence of other absorbing states of Rydberg character, with much weaker intensities. We also report new transient absorption data obtained by a broadband 8fs pump, which time-resolve strong modulations of the excimer absorption. The combination of theory and experiment provides a detailed picture of the evolution of the electronic structure of the PCP excimer in the course of a single molecular vibration.

Thermo-Chemical Cues-Mediated Strategy to Control Peptide Self-Assembly and Charge Transfer Complexation.

Peptide amphiphiles (PAs) are known for their remarkable ability to undergo molecular self-assembly, a process that is highly responsive to the local microenvironment. Herein, we design a pyrene tethered peptide amphiphile Py-VFFAKK, 1 that exhibits pathway-driven self-assembly from metastable nanoparticles to kinetically controlled nanofibers and thermodynamically stable twisted bundles upon modulations in pH, temperature, and chemical cues. The presence of the pyrene moiety ensures donation of the electron to an electron acceptor, namely, 7,7,8,8-tetracyanoquinodimethane (TCNQ), to form a supramolecular charge transfer complex in aqueous solution that was studied in detail with microscopic and spectroscopic techniques. Excitation of the donor species in its excimer state facilitates electron donation to the acceptor moiety, paving away a long-lived charge-separated state that persists for over a nanosecond, as ascertained through transient absorption spectroscopy. Finally, the self-assembled charge transfer complex is explored toward antimicrobial properties with Escherichia coli while maintaining biocompatibility toward L929 mice fibroblast cells.

Eclipsed and Twisted Excimers of Pyrene and 2-Azapyrene: How Nitrogen Substitution Impacts Excimer Emission.

Due to their unique photophysical and electronic properties, pyrene and its analogues have been the subject of extensive research in recent decades. The propensity of pyrene and its derivatives to form excimers has found wide application in various fields. Nitrogen-substituted pyrene derivatives display similar photophysical properties, but for them, excimer emission has not been reported to date. Here, we use time-dependent density functional theory (TD-DFT) calculations to investigate the low-lying exciton states of dimers of pyrene and 2-azapyrene. The excimer equilibrium structures are determined and the contribution of charge transfer (CT) excitations and intermolecular interactions to the exciton states is disclosed using a diabatization procedure. The study reveals that the dimers formed by the two molecules have quite similar exciton-state patterns, in which the relevant CT contributions govern the formation of excimer states, along with the La/Lb state inversion. In contrast with pyrene, the dipole-dipole interactions in 2-azapyrene stabilize the dark eclipsed excimer structure and increase the barrier for conversion into a bright twisted excimer. It is suggested that these differences in the nitrogen-substituted derivative might influence the excimer emission properties.

Triplet Excimer Formation in a DNA Duplex with Silver Ion-Mediated Base Pairs.

The dynamics of excited electronic states in self-assembled structures formed between silver(I) ions and cytosine-containing DNA strands or monomeric cytosine derivatives were investigated by time-resolved infrared (TRIR) spectroscopy and quantum mechanical calculations. The steady-state and time-resolved spectra depend sensitively on the underlying structures, which change with pH and the nucleobase and silver ion concentrations. At pH ∼ 4 and low dC20 strand concentration, an intramolecularly folded i-motif is observed, in which protons, and not silver ions, mediate C-C base pairing. However, at the higher strand concentrations used in the TRIR measurements, dC20 strands associate pairwise to yield duplex structures containing C-Ag+-C base pairs with a high degree of propeller twisting. UV excitation of the silver ion-mediated duplex produces a long-lived excited state, which we assign to a triplet excimer state localized on a pair of stacked cytosines. The computational results indicate that the propeller-twisted motifs induced by metal-ion binding are responsible for the enhanced intersystem crossing that populates the triplet state and not a generic heavy atom effect. Although triplet excimer states have been discussed frequently as intermediates in the formation of cyclobutane pyrimidine dimers, we find neither computational nor experimental evidence for cytosine-cytosine photoproduct formation in the systems studied. These findings provide a rare demonstration of a long-lived triplet excited state that is formed in a significant yield in a DNA duplex, demonstrating that supramolecular structural changes induced by metal ion binding profoundly affect DNA photophysics.

Spontaneous-Symmetry-Breaking Charge Separation Induced by Pseudo-Jahn-Teller Distortion in Organic Photovoltaic Material.

The driving force of charge separation in the initial photovoltaic conversion process is theoretically investigated using ITIC, a nonfullerene acceptor material for organic photovoltaic devices. The density functional theory calculations show that the pseudo-Jahn-Teller (PJT) distortion of the S1 excimer state induces spontaneous symmetry-breaking charge separation between the identical ITIC molecules even without the asymmetry of the surrounding environment. The strong PJT effect arises from the vibronic coupling between the pseudodegenerate S1 and S2 excited states with different irreducible representations (irreps), i.e., Au for S1 and Ag for S2, via the asymmetric vibrational mode with the Au irrep. The vibrational mode responsible for the spontaneous polarization, which is opposite in one ITIC monomer and the other, is the intramolecular C-C stretching vibration between the core IT and terminal IC units. These results suggest that controlling the PJT effect can improve the charge separation efficiency of the initial photovoltaic conversion process.

Monomer and Excimer Emission in Electrogenerated Chemiluminescence of Pyrene and 2,7-Di-tert-butylpyrene Associated with Electron Transfer Distance.

Electrogenerated chemiluminescence (ECL) is a light emission phenomenon caused by electrochemically generated radical anions (R•-) and cations (R•+), in which the ion annihilation results in the formation of a pair of excited (R*) and ground state (R) of a luminescent molecule. Here, the ECL properties of pyrene (Py) and 2,7-di-tert-butylpyrene (di-t-BuPy) are reported. It was found that at a commonly employed concentration (1 mM), the ECL spectra were time-dependent because of increasing the oligomer emission and increasing the concentration of R near R*, leading to an enhancement of the excimer emission. At a low concentration range (20-30 μM), the shape of the ECL spectra containing the monomer and excimer emission was determined by isolated pairs of R* and R, which were generated through ion annihilation of R•- and R•+. It was found that in the ECL of Py and di-t-BuPy originated from the isolated pairs of R•- and R•+, 58 and 48% of the excited states were the excimer states, respectively. Diffusion equation analysis indicates that the lower excimer formation in the case of di-t-BuPy is because of a farther initial separation distance between R* and R, i.e., a longer electron transfer distance between the radical ions. The Marcus model for the electron transfer kinetics suggests that the farther electron transfer distance is mainly caused by the larger molecular size, which resulted in a smaller reorganization energy of the solvent acetonitrile molecule. Taking advantage of the photophysical and electrochemical properties of Py and di-t-Bu Py, the monomer and excimer emission in ECL is discussed.

Excited state dynamics of bay and peri benzothienyl perylene to understand the excimer formation and its dissociation

Many planar acenes such as pyrene, perylene etc. are known to form dimeric complex of their ground and excited state (excimer formation). Relaxation of excimer, carrier mobility & exciton diffusion in the solid state, and even singlet fission depends on the interaction between ground and excited state molecules in excimer. The role of excimer in triplet formation can be understood by: S0↑↓+S1↑↓⇄{S1S01↑↓↑↓}⇄{T1T11↑↑↓↓}⇄T1↑↑+T1↓↓. Intermediate excimer (T1T1)1 formation i.e., (SnS0)1 → (T1T1)1, and its decay to triplets have been studied by several groups, however, reports on the dissociation of excimer are very few. In this work, we aimed to study the dynamics of excimer formation and its further dissociation using perylene derivatives. We synthesized two positional isomers of benzothienyl substituted perylene i.e., peri-BT and bay-BT, and studied their photophysical properties in solution, nanoaggregates, and thermally evaporated thin films. Excited state dynamics in thin films suggest the dissociation of 1(excimer) to a monomeric singlet excited state in a microsecond timescale. Transient absorption spectral characteristics suggest the formation of a charge transfer state within picoseconds, followed by decay to a long-lived (few microseconds) excimer state. The formation of CT is promoted by strong intermolecular interaction in the thin film.

A Single-Crystal Monomer to Single-Crystal Polymer Reaction Activated by a Triplet Excimer in a Zipper Mechanism.

A combined experimental and theoretical study focused on the elucidation of the polymerization mechanism of the crystal monomer to crystal polymer reaction of a bisindenedione compound in the solid state. The experimental description and characterization of the polymer product have been reported elsewhere and, in this article, we address the first detailed description of the polymerization process. This reaction pathway consists of the initial formation of a triplet excimer state that relaxes to an intermolecularly bonded triplet state that is the starting point of the propagation step of the polymerization. The overall process can be visualized in the monomer starting state as an open zipper in which a cursor or slider is formed by light absorption and the whole zipper is then closed by propagation of the cursor. To this end, variable-temperature electron spin resonance (ESR), femtosecond transient absorption spectroscopy, and vibrational Raman spectroscopic data have been implemented in combination with quantum chemical calculations. The presented mechanistic insight is of great value to understand the intricacies of such an important reaction and to envisage and diversify the products produced thereof.