Excessive Amounts Research Articles

Biological removal of nitrogenous waste compounds in the biofloc aquaculture system: a review

Abstract Aquaculture has experienced significant global expansion and is considered one of the fastest-growing sectors in food production. However, there exist additional challenges that restrict the capacity to achieve maximum efficiency in aquaculture systems, such as issues over water quality and shortages of appropriate live feeds. Intensive aquaculture systems involve the use of protein-rich prepared feed for feeding the cultured animals. This may give rise to the discharge of nitrogenous compounds into the water, which can pose a risk to the environment when present in excessive quantities beyond the acceptable levels. In recent years, an innovative method called biofloc technology (BFT) has become a practical solution to this issue. Undoubtedly, BFT offers a groundbreaking method for nutrient disposal that eradicates the requirement for excessive water use or equipment maintenance. Three primary types of microorganisms are crucial in alleviating the adverse impacts of nitrogen compounds in this technique. Photoautotrophs participate in the processes of removal and absorption, whereas chemoautotrophs promote nitrification and conversion. Heterotrophs contribute to the absorption process. Biofloc predominantly consists of heterotrophic bacteria, alongside algae, protozoa, rotifers, and nematodes. While there have been reviews carried out on multiple aspects of biofloc technology, there exists a lack of literature that tackles this particular field of research progress. This article discusses every aspect and techniques of biological management used for removing nitrogenous waste compounds in biofloc aquaculture systems.

Bovine serum albumin uptake and polypeptide disaggregation studies of hypoglycemic ruthenium(II) uracil Schiff-base complexes

Our prior studies have illustrated that the uracil ruthenium(II) diimino complex, [Ru(H3ucp)Cl(PPh3)] (1) (H4ucp = 2,6-bis-((6-amino-1,3-dimethyluracilimino)methylene)pyridine) displayed high hypoglycemic effects in diet-induced diabetic rats. To rationalize the anti-diabetic effects of 1, three new derivatives have been prepared, cis-[Ru(bpy)2(urdp)]Cl2 (2) (urdp = 2,6-bis-((uracilimino)methylene)pyridine), trans-[RuCl2(PPh3)(urdp)] (3), and cis-[Ru(bpy)2(H4ucp)](PF6)2 (4). Various physicochemical techniques were utilized to characterize the structures of the novel ruthenium compounds. Prior to biomolecular interactions or in vitro studies, the stabilities of 1–4 were monitored in anhydrous DMSO, aqueous phosphate buffer containing 2% DMSO, and dichloromethane (DCM) via UV–Vis spectrophotometry. Time-dependent stability studies showed ligand exchange between DMSO nucleophiles and chloride co-ligands of 1 and 3, which was suppressed in the presence of an excess amount of chloride ions. In addition, the metal complexes 1 and 3 are stable in both DCM and an aqueous phosphate buffer containing 2% DMSO. In the case of compounds 2 and 4 with no chloride co-ligands within their coordination spheres, high stability in aqueous phosphate buffer containing 2% DMSO was observed. Fluorescence emission titrations of the individual ruthenium compounds with bovine serum albumin (BSA) showed that the metal compounds interact non-discriminately within the protein's hydrophobic cavities as moderate to strong binders. The metal complexes were capable of disintegrating mature amylin amyloid fibrils. In vivo glucose metabolism studies in liver (Chang) cell lines confirmed enhanced glucose metabolism as evidenced by the increased glucose utilization and glycogen synthesis in liver cell lines in the presence of complexes 2–4.

Geochemical background and geopedological interactions of selenium in soils from Piauí state, Northeastern Brazil

ABSTRACT Although Selenium (Se) plays a role as a micronutrient for humans through vegetable consumption, it is also recognized as toxic when present in excessive quantities. Therefore, quantifying Se contents in soils can prevent diseases influenced by crop Se deficiency or excess. We aimed to measure background contents, establish quality reference values (QRV) for Se in soils from two Brazilian biomes (Cerrado and Caatinga), and assess how geopedological factors affect Se content and spatial variability. Two hundred and eight composite topsoil samples were analyzed for Se content, covering an area of about 251,578 km². Sampling sites were under the minimal anthropogenic influence to represent Se background contents. Selenium contents were determined by hydride generation atomic absorption spectroscopy (HGAAS), ranging from 0.002 to 4.78 mg kg -1 . Most soils had contents below the world average of 0.44 mg kg -1 but still above the soil content that causes human Se deficiency (0.125 mg kg -1 ). Soils from Cerrado and Caatinga biomes showed similar average contents of Se, 0.41 and 0.47 mg kg -1 , respectively. Organic carbon content and soil particle size (clay fraction) were the main factors governing Se content in the soils. Our results contribute to understanding the Se content and spatial distribution in tropical soils and the factors governing them. They also provide a tool for agriculture and environmental decision-makers to plan public policies regarding the management of Se levels in these and similar tropical soils in the world.

Abstract 737: Arrays of 3D ECM-embedded fibroblast clusters for characterization of ECM remodeling by primary cancer associated fibroblasts and for evaluation of drugs attenuating fibrotic ECM remodeling

Abstract Chronic fibrosis can lead to organ failure and is also associated with cancer, where the tumor is interpreted as a chronic wound, and the fibrotic tumor environment drives disease progression. Fibrosis occurs in an inflammatory environment where macrophages are activated, and fibroblasts transdifferentiate into myofibroblasts. Activated macrophages stimulate the myofibroblasts to produce excessive amounts of collagen-rich ECM. Changes in proteolytic activity and high contractile forces that myofibroblasts apply onto their tissue environment, further lead to extensive remodeling of the healthy tissue matrix into a scar matrix. Similar activity is displayed by cancer-associated fibroblasts (CAFs) in tumors. Intervening with the excessive ECM remodeling by activated fibroblasts represents a candidate therapeutic strategy to normalize the architecture of fibrotic and malignant tissues. We developed a screening platform using an assay based on automated image guided injection of clusters of fibroblasts in wells of multi-well plates preloaded with a collagen-rich ECM network. The identical x-y-z position, spacing, and size of the ECM-embedded fibroblast clusters in each well facilitates automated real time confocal microscopy and quantitative image analysis algorithms. We use this setup for automated quantitative analysis of ECM remodeling activity of CAFs obtained from early-stage colorectal cancer patients. We find that CAFs from these early-stage lesions display increased ECM remodeling capacity as compared to patient matched normal fibroblasts. We then use the same setup to screen a series of compounds for their ability to attenuate ECM remodeling triggered by TGFb-activated primary human fibroblasts. We detect known and novel pathways, and we identify small molecule inhibitors with a promising efficacy versus toxicity profile. Lastly, we detect a previously unknown concentration-dependent side effect of ALK5 inhibitors that leads to the identification of a novel profibrotic pathway and indicates that caution is warranted for the clinical application of ALK5 inhibitors. Citation Format: Erik H. J. Danen. Arrays of 3D ECM-embedded fibroblast clusters for characterization of ECM remodeling by primary cancer associated fibroblasts and for evaluation of drugs attenuating fibrotic ECM remodeling [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 737.

An electrochemical tool for food additive: A nanoengineered sustainable approach on the preparation of t-LaVO4 rods decorated on g-carbon nitride nanocomposite for determination of theobromine

The dimethylxanthine alkaloid of theobromine (TB) naturally occurs in plants and their products. Derivatives of methylxanthine can potentially induce detrimental impacts on human health if ingested in excessive quantities or by individuals who are particularly susceptible to their effects. Therefore, a differential pulse voltammetry (DPV) method utilizing an electrode modified with a nanocomposite was proposed as an analytical approach for determining TB. Herein, the rare earth metal vanadate (REVO4) has recently played a key role in its use as an electrocatalyst in electrochemical sensors. REVO4's electronic characteristics enable electrochemical, optical, or impedance-based signal transduction and sensitive analyte detection. Due to these characteristics, REVO4 boosts sensing target analyte signals, enhancing sensor system sensitivity. In this paper, we constructed a sensor with nanostructured g-C3N4 entrapped LaVO4 nanomaterial successfully combined to make a nanocomposite to detect food analyte. Various voltammetric and spectroscopic techniques characterized the successfully prepared material LaVO4@g-C3N4 and its electrochemical behaviors. The electrochemical detection of TB, differential pulse voltammetric response was obtained in the wide linear range of 0.001–365 μM, the limit of detection (LOD) is 8 nM and the sensitivity of 4.03 μA μM−1 cm−2. The sensing platform of the electrochemical sensor successfully detected the extract of food samples such as water and chocolate milk samples and exhibited good recovery values of ±98.6–99.0%. The constructed sensor provides a robust means for monitoring alkaloids in complex matrices and a promising opportunity to develop sensitive and selective electrode materials with good reusability.

Wetting property of Fe‐S melt in solid core: Implication for the core crystallization process in planetesimals

AbstractIn differentiated planetesimals, the liquid core starts to crystallize during secular cooling, followed by the separation of liquid–solid phases in the core. The wetting property between liquid and solid iron alloys determines whether the core melts are trapped in the solid core or they can separate from the solid core during core crystallization. In this study, we performed high‐pressure experiments under the conditions of the interior of small bodies (0.5–3.0 GPa) to study the wetting property (dihedral angle) between solid Fe and liquid Fe‐S as a function of pressure and duration. The measured dihedral angles are approximately constant after 2 h and decrease with increasing pressure. The dihedral angles range from 30° to 48°, which are below the percolation threshold of 60° at 0.5–3.0 GPa. The oxygen content in the melt decreases with increasing pressure and there are strong positive correlations between the S + O or O content and the dihedral angle. Therefore, the change in the dihedral angle is likely controlled by the O content of the Fe‐S melt, and the dihedral angle tends to decrease with decreasing O content in the Fe‐S melt. Consequently, the Fe‐S melt can form interconnected networks in the solid core. In the obtained range of the dihedral angle, a certain amount of the Fe‐S melt can stably coexist with solid Fe, which would correspond to the “trapped melt” in iron meteorites. Excess amounts of the melt would migrate from the solid core over a long period of core crystallization in planetesimals.

Phase Equilibrium Study of Rare Earth Oxide–Fluoride Salt System: A Review

The applications of rare earth metals and alloys are becoming increasingly widespread and there is a strong market demand. Currently, most of the production enterprises adopt the fluoride–oxide system for electrolytic preparation of rare earth metals and alloys. The solubility of rare earth oxides in molten salt directly affects the selection of operational parameters in the electrolysis process. When the added amount of RE2O3 is less than its solubility, it leads to a decreased electrolytic efficiency. Conversely, an excessive amount of oxide is prone to settle at the bottom of the electrolytic cell, impeding smooth production. The RE2O3 solubility in the fluoride salt can be represented by the phase equilibrium of the RE2O3-REF3-LiF system. The isothermal lines in the primary phase field of rare earth oxide represent the solubility of the oxide in the fluoride salt at the corresponding temperature. This paper outlines the research methods and experimental results on the phase equilibria of the RE2O3-REF3-LiF system. The characteristics and existing problems in the current phase equilibrium study are analyzed. The solubility data of RE2O3 are expressed in the forms of ternary and pseudo-binary phase diagrams of the RE2O3-REF3-LiF system, providing theoretical guidance for the establishment of an accurate and reliable rare earth electrolysis system database and the optimization of electrolytic processes.

Tuning Catalytic Activity of Palladium in Direct C−H Arylation of Biologically Active Xanthines using Silver Additive.

AbstractWe describe an efficient and versatile method for the direct C−H arylation of xanthines with aryl halides using Pd/P(o‐tolyl)3 as catalyst and Ag2O as an additive. Silver salts have been frequently used as an additive in the Pd‐catalyzed C−H bond activation reactions albeit in excessive amounts (2 to 4 eq.). Herein, we use of a stoichiometric amount (0.1 to 1 eq.) of Ag2O to obtain the optimum yields of C‐8 arylated products. This method exhibits broad substrate scope and enables synthesis of a wide range of xanthine derivatives by variation of aryl component at the C‐8 position. A key advantage of silver additive is that it reduces the catalyst loading and time required for the completion of reactions. Although kinetic experiments show that the inclusion of silver salt accelerates the rate of reaction, catalytic role of silver salt could not be conceived since the C−H bond cleavage is not a rate determining step. Silver salt presumably act as a terminal oxidant in the catalytic cycle and assist the regeneration of Pd catalyst. Moreover, preliminary assessment of biological activities of xanthines demonstrates that the C‐8 arylated xanthines derivatives efficiently inhibit the α‐Synuclein fibrillation, a key factor behind Parkinson's disease.

Liver fibrosis pathologies and potentials of RNA based therapeutics modalities.

Liver fibrosis (LF) occurs when the liver tissue responds to injury or inflammation by producing excessive amounts of scar tissue, known as the extracellular matrix. This buildup stiffens the liver tissue, hinders blood flow, and ultimately impairs liver function. Various factors can trigger this process, including bloodborne pathogens, genetic predisposition, alcohol abuse, non-steroidal anti-inflammatory drugs, non-alcoholic steatohepatitis, and non-alcoholic fatty liver disease. While some existing small-molecule therapies offer limited benefits, there is a pressing need for more effective treatments that can truly cure LF. RNA therapeutics have emerged as a promising approach, as they can potentially downregulate cytokine levels in cells responsible for liver fibrosis. Researchers are actively exploring various RNA-based therapeutics, such as mRNA, siRNA, miRNA, lncRNA, and oligonucleotides, to assess their efficacy in animal models. Furthermore, targeted drug delivery systems hold immense potential in this field. By utilizing lipid nanoparticles, exosomes, nanocomplexes, micelles, and polymeric nanoparticles, researchers aim to deliver therapeutic agents directly to specific biomarkers or cytokines within the fibrotic liver, increasing their effectiveness and reducing side effects. In conclusion, this review highlights the complex nature of liver fibrosis, its underlying causes, and the promising potential of RNA-based therapeutics and targeted delivery systems. Continued research in these areas could lead to the development of more effective and personalized treatment options for LF patients.

Will Nigella sativa oil protect parotid glands of rats against cranium gamma irradiation? Histological and immunohistochemical evaluation

BackgroundRadiation plays an essential role in treating malignancies. Radiation exposure of salivary glands often results in permanent loss of their functions; therefore, their protection against radiation is crucial. Nigella sativa oil (NSO) is a useful antioxidant against free radicals. The purpose of this study was to investigate the radio-protective effect of NSO on oxidative injury of parotid glands of gamma-irradiated rats. Methods: Twenty-eight male albino rats were divided into four groups (n = 7): Group 1: Neither NSO nor radiation, Group 2: Rats received NSO 400 mg/kg, Group 3: Rats received 15 Gy cranium gamma irradiation & Group 4: Rats received gamma irradiation and NSO. Rats were sacrificed two weeks after the last NSO dose. Histological sections of parotid glands were stained with H&E, Masson’s trichrome and anti-TGF-β antibodies. Area percentage of Masson’s trichrome and TGF-β expression was morphometrically examined. Results: Parotid glands of control and NSO groups revealed normal morphology. Gamma-irradiated glands showed loss of normal acinar architecture and slight acinar shrinkage. NSO treatment of gamma-irradiated glands preserved acinar outline and architecture. Masson’s trichrome stained samples revealed trace amounts of collagen fibers in control and NSO groups, and excessive amounts of collagen fibers in gamma-irradiated group, in addition to few collagen fibers for gamma-irradiated glands treated with NSO. Additionally, control and NSO groups showed negative TGF-β expression. Gamma-irradiated group showed high TGF-β expression, while NSO treated gamma-irradiated group showed moderate TGF-β expression. Conclusions: Gamma-irradiation adversely affected parotid glands, and in contrast, NSO seemed to positively counteract this adverse effect.

Fundamental Experiment and Numerical Simulation of Ne/Xe Plasma Magnetohydrodynamic Electrical Power Generation

We conducted experiments in a shock-tube facility to test magnetohydrodynamic (MHD) electrical power generation with Xe-seeded Ne plasma. The performance and plasma behavior of the experimental generator were examined using time-dependent r-θ two-dimensional numerical simulations. In the experiment, an enthalpy extraction ratio of about 5.0% was obtained using a disk-shaped MHD generator with radio frequency pre-ionization. The numerical simulations show that the enthalpy extraction ratio is improved by adding small amounts of Xe to Ne, but also that adding excessive amounts of Xe deteriorates the generator performance. When an appropriate inlet electron temperature is assumed in the simulations, 5900–6450 K (inlet ionization degree of 0.25×10−4–0.72×10−4) for a seed fraction (mole % of Xe) of 0.1%, 6050–6280 K (1.08×10−4–1.70×10−4) for a seed fraction of 1.0%, and 5750–5950 K (1.27×10−4–1.97×10−4) for a seed fraction of 5.0%, the plasma structure almost becomes similar to the nonuniform plasma structure observed in the experiment, as too does the enthalpy extraction ratio. The simulations suggest that achieving an inlet ionization degree above 5–6×10−4 when using Ne/Xe with a seed fraction of 0.1–1.0% as the working gas should enable an enthalpy extraction ratio above 20%, which is expected to surpass that for pure Ar.

Achieving Nickel-Catalyzed Reductive C(sp2)-B Coupling of Bromoboranes via Reversing the Activation Sequence.

Transition metal-catalyzed reductive cross-couplings to build C-C/Si bonds have been developed, but the reductive cross-coupling to create the C(sp2)-B bond has not been explored. Herein, we describe a nickel-catalyzed reductive cross-coupling between aryl halides and bromoboranes to construct a C(sp2)-B bond. This protocol offers a convenient approach for the synthesis of a wide range of aryl boronate esters, using readily available starting materials. Mechanistic studies indicate that the key to the success of the reaction is the activation of the B-Br bond of bromoboranes with a Lewis base such as 2-MeO-py. The activation ensures that bromoboranes will react with the active nickel(I) catalyst prior to aryl halides, which is different from the sequence of the general nickel-catalyzed reductive C(sp2)-C/Si cross-coupling, where the oxidative addition of an aryl halide proceeds first. Notably, this approach minimizes the production of undesired homocoupling byproduct without the requirement of excessive quantities of either substrate.

The Role of Glutathione in the Management of Cell-Mediated Immune Responses in Individuals with HIV.

Human immunodeficiency virus (HIV) is a major cause of death worldwide. Without appropriate antiretroviral therapy, the infection can develop into acquired immunodeficiency syndrome (AIDS). AIDS leads to the dysregulation of cell-mediated immunity resulting in increased susceptibility to opportunistic infections and excessive amounts of inflammatory cytokines. HIV-positive individuals also demonstrate diminished glutathione (GSH) levels which allows for increased viral replication and increased pro-inflammatory cytokine release, further contributing to the high rates of mortality seen in patients with HIV. Adequate GSH supplementation has reduced inflammation and slowed the decline of CD4+ T cell counts in HIV-positive individuals. We aim to review the current literature regarding the role of GSH in cell-mediated immune responses in individuals with HIV- and AIDS-defining illnesses.

Coal Mine Drainage as a Source of Drinking and Industrial Water—The Upper Silesian Coal Basin, Poland

Water is one of the most important resources found on Earth, essential for all forms of life. Both the quantity and quality of water resources are crucial for the health of the population and for economic sectors, making water a factor in determining a society’s standard of living. Mine water serves as an appealing source of both drinking and technological water. Regardless of the exploitation method, it must be pumped to the surface and, usually, treated to meet environmental standards. In most cases, it is discharged to rivers. In this article, we present a model of the use of mine water from three pumping stations of decommissioned coal mines in the Upper Silesian Coal Basin—Jan Kanty, Saturn, and Boże Dary. Water from these pumping stations is characterized by good qualitative and quantitative parameters. The results of the physico-chemical composition analyses carried out in the years 2012–2022 did not reveal any excessive amounts of toxic components or treatment difficulties. Given the long operational lifespan of these pumping stations and their existing water extraction infrastructure, they emerge as promising sources of both potable and industrial water supply, demanding minimal treatment efforts.

A hierarchical distributed trusted location service achieving location k-anonymity against the global observer

As widely known in the literature, location-based services can seriously threaten users’ privacy. Privacy-aware location-based services can be obtained by protecting the user’s identity, so that queries cannot be linked with users. A way to do this is to place a trusted third party, called Location Trusted Service, between the user and the service provider, with the role of mediating the queries coming from the users and proxying them to the provider. Before proxying the query, the Location Trusted Service builds a cloaking area that includes a sufficient number of users such that it can represent an anonymity set. This way, the identity of the user is protected against an untrusted service provider. Unfortunately, in wide-area scenarios, a centralized location-trusted service might represent a serious threat to security and privacy because the service represents a single point of failure that manages very critical and massive information. Moreover, privacy protection also against a global adversary capable to monitor the whole traffic, would result in an excessive amount of cover traffic in the network (being cover traffic necessary in this threat model).To overcome the above limitations we propose a hierarchical Location Trusted Service, whose implementation benefits from the edge–cloud paradigm. In our proposal, the territory is organized in hierarchical zones possibly managed by different autonomous organizations. Organizations that manage higher zones are involved when lower-level organizations are not able to satisfy the requests of the users. As only the lowest-level services manage exact location data, while the higher ones operate only on aggregate values, the risk associated with the single point of failure of the centralized solution is drastically reduced. Moreover, leveraging the edge–cloud implementation of the system, network traffic is better confined to the edge of the network, making the protection against the global observer feasible.A nice feature of our method is that it is parametric with respect to any existing cloaking area construction technique. However, as our method, for non-local queries, operates on aggregate data, a certain degree of approximation is introduced. To validate our proposal, we conducted an experimental campaign on a real-life map by applying our method on top of well-known cloaking area construction technique called Casper. The results turned out to be positive. For a wide range of sizes of the anonymity set, the approximation (expressed by the metric called effectiveness) is less than 10%. On the other hand, concerning the network performance, we have observed an improvement in latency and throughput ranging from 20% to 170% (depending on the size of the anonymity set). In the highest density distribution, we achieve a 66% saving in overall (non-local) traffic compared to the centralized approach.

Facile preparation of KNN thin film with high purity phase and excellent electrical properties

Obtaining high purity alkali niobate (K x Na1-x NbO3) thin films without secondary phase on metal coated traditional silicon (Si) substrates via sol–gel technique has remained great challenges until now. Herein, we report K0.5Na0.5NbO3 (KNN) thin films successfully deposited on Pt/Ti/SiO2/Si(100) substrates by a simply effective sol–gel process. A comprehensive and systematic investigation of processing conditions on the microstructures and electrical properties of spin-coated KNN films was presented. We have found that phase purity and microstructures of KNN films are strongly influenced by content of alkali excess and the annealing temperature. Thin films with an equal excess amount of 10% mol K and Na (KNN1) sintered at 650 °C show high crystallinity with a preferred (100)-orientation degree of 78%, and homogeneous and dense surface with columnar structure and large grain size up to 254 nm. The result of quantitative XPS analysis has proved that the composition of the film is close to the chemical stoichiometry. As a consequence, the obtained KNN1 films exhibit a large dielectric constant of 775 and low dielectric loss of ∼2% in the wide frequency range from 1kHz up to 10MHz as well as the best shape of P−E loops. Furthermore, leakage current density of the film is about 9.45 × 10−5 A cm−2 at E ≈100 kV cm−1.

Comprehensive environmental impact assessment and irrigation wastewater suitability of the Arab El-Madabegh wastewater treatment plant, ASSIUT CITY, EGYPT.

The presence of a wastewater treatment plant in the Arab El-Madabegh region, which discharges excessive amounts of raw effluent toward the nearby farming fields, is the area's main issue. Examining the harmful implications of raw effluent releases on groundwater quality, determining if treated wastewater effluent complies with regulations for discharge into the aquatic environment, and assessing irrigation appropriateness by the effluent are the main goals of this work. In order to accomplish these targets, twelve treated effluent samples from the Arab El-Madabegh wastewater treatment plant were gathered every two weeks starting in January 2012 and finishing in June 2012. They were tested to determine pH, Total Dissolved Solids (TDS), Total Suspended Solids (TSS), Temperature (Temp), Conductivity (EC), Turbidity (Turb.), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD), Total Organic Carbon (TOC), NO3-, SO42-, Cl-, Ca2+, PO43-, HCO3-, Na+, Mg2+, and heavy metals such as (Fe, Mn, K+, Cr, Pb, Zn, Ni, Cu, and Cd). The outcomes revealed that all Egyptian and Food and Agricultural Organization (FAO) standards for unrestricted irrigation were met by the treated effluents, except for COD, which exceeded than the Egyptian allowed limit. The evaluation indices of the effluent's EC, SAR, PI, MR, and MH were in the low-risk category according to indicators of water quality for irrigation, nevertheless, The SSP and RSC both showed slightly higher values (67.9% and 2.76, respectively). As well, The average values of heavy metals in treated wastewater effluent were found to be below permitted limits, with the exception of lead and phosphate, which exceeded permissible limits in Egypt. The environmental sustainability (ecological friendliness) of reusing and recycling tertiary treated wastewater can be achieved in agriculture to reduce the adverse impacts on the aquatic environment.

Changes in the Main Physicochemical Properties and Electrochemical Fingerprints in the Production of Sea Buckthorn Juice by Pectinase Treatment.

Enzymatic hydrolysis using pectinase is critical for producing high-yield and quality sea buckthorn juice. This study determined the optimal temperature, time, and enzyme dosage combinations to guide manufacturers. A temperature of 60 °C, hydrolysis time of 3 h, and 0.3% enzyme dosage gave 64.1% juice yield-25% higher than without enzymes. Furthermore, monitoring physicochemical properties reveals enzyme impacts on composition. Higher dosages increase soluble solids up to 15% and soluble fiber content by 35% through cell wall breakdown. However, excessive amounts over 0.3% decrease yields. Pectin concentration also declines dose-dependently, falling by 91% at 0.4%, improving juice stability but needing modulation to retain viscosity. Electrochemical fingerprinting successfully differentiates process conditions, offering a rapid quality control tool. Its potential for commercial inline use during enzymatic treatment requires exploration. Overall, connecting optimized parameters to measured effects provides actionable insights for manufacturers to boost yields, determine enzyme impacts on nutrition/functionality, and introduce novel process analytical technology. Further investigations of health properties using these conditions could expand sea buckthorn juice functionality.

The potential of N-fixing bacteria consortium inoculation and NPK application in increasing soil N-total, plant N uptake and tomato (Lycopersicum esculentum Mill.) yields in Andisol

Nitrogen is an essential nutrient for growing tomato plants (Lycopersicum esculentum Mill.) on Andisol soil order. However, many farmers tend to use an excessive amount of inorganic fertilizers, which can have adverse effects on both the environment and tomato yield. To combat this problem, an alternative solution is to replace the inorganic fertilizer through inoculation of Azotobacter as an N-fixing bacteria. An experiment was conducted to examine the combined effects of the N-fixing consortium with NPK on total soil N, N uptake, Azotobacter spp. population, growth and the tomato plants yield. The experiment was performed on Andisols, located roughly 1250 m above sea level in West Java Province. The experimental design used was a Randomized Block Design, in three replications, consisting of A (Control), B (N-fixing inoculation), C (N-fixing + ¼ NPK), D (N-fixing + ½ NPK), E (N-fixing + ¾ NPK), F (N-fixing + 1 NPK), and G (1 NPK). The experiment revealed that the Lembang Andisol had an acidic pH, moderate available N, and high P retention. Applying Azotobacter sp. and Azotobacter vinelandii (N-fixing consortium) combined with one dose of NPK increased plant height and the total soil N content. N-fixing inoculation combined with 1/4 NPK, ½ NP, and ¾ NPK increased plant N uptake. The inoculation of N-fixing + ¼ NPK increased fruit weight, the number of fruits, and the yield per hectare of tomatoes. Inoculating Azotobacter sp. and Azotobacter vinelandii in mixed culture can reduce NPK usage by 75%, resulting in higher tomato yield.

Dickson polynomial-based secure group authentication scheme for Internet of Things

Internet of Things (IoT) paves the way for the modern smart industrial applications and cities. Trusted Authority acts as a sole control in monitoring and maintaining the communications between the IoT devices and the infrastructure. The communication between the IoT devices happens from one trusted entity of an area to the other by way of generating security certificates. Establishing trust by way of generating security certificates for the IoT devices in a smart city application can be of high cost and expensive. In order to facilitate this, a secure group authentication scheme that creates trust amongst a group of IoT devices owned by several entities has been proposed. The majority of proposed authentication techniques are made for individual device authentication and are also utilized for group authentication; nevertheless, a unique solution for group authentication is the Dickson polynomial based secure group authentication scheme. The secret keys used in our proposed authentication technique are generated using the Dickson polynomial, which enables the group to authenticate without generating an excessive amount of network traffic overhead. IoT devices' group authentication has made use of the Dickson polynomial. Blockchain technology is employed to enable secure, efficient, and fast data transfer among the unique IoT devices of each group deployed at different places. Also, the proposed secure group authentication scheme developed based on Dickson polynomials is resistant to replay, man-in-the-middle, tampering, side channel and signature forgeries, impersonation, and ephemeral key secret leakage attacks. In order to accomplish this, we have implemented a hardware-based physically unclonable function. Implementation has been carried using python language and deployed and tested on Blockchain using Ethereum Goerli’s Testnet framework. Performance analysis has been carried out by choosing various benchmarks and found that the proposed framework outperforms its counterparts through various metrics. Different parameters are also utilized to assess the performance of the proposed blockchain framework and shows that it has better performance in terms of computation, communication, storage and latency.