Excellent Water Dispersibility Research Articles

Nitrogen-doped carbon dots as fluorescent probes for sensitive and selective determination of Fe3+

At present, the contamination of water resources by heavy metal ions has posed a significant threat to human survival. Therefore, it is particularly critical to develop low-cost, easy-to-use, and highly efficient heavy metal detection technologies. In this work, a fast and cost-effective fluorescent probe for nitrogen-doped carbon dots (N-CDs) was prepared using one-step hydrothermal method with citric acid (CA) as carbon source, and melamine as nitrogen source. The structural and optical characterizations of the resulting N-CDs were investigated in details. The results showed that the quantum yield of the prepared fluorescent probe was as high as 45 %, and an average fluorescence lifetime was about 7.80 ns. N-CDs have excellent water solubility and dispersibility, with an average size of 2.58 nm. N-CDs exhibited excellent specific responsiveness to Fe3+ and can be used as an effective method for detecting Fe3+ at low-concentrations (the concentrations of N-CDs as low as 0.24 μg/mL) using fluorescent probes. The linear response of the fluorescent probe N-CDs to Fe3+ was formed in the concentration range of 20–80 μM, and the detection limit was 3.18 μM. In addition, in the actual water samples analysis, the recovery rate reached 97.05–100.58 %. The prepared of N-CDs provide available Fe3+ fluorescent probes in the environment.

Yeast‐Controlled Double‐Shelled CaCO3/CaF2 Hollow Nanospheres with Hierarchically Porous for Sustained pH‐Sensitive Drug Release

Comprehensive SummaryHierarchically porous materials (HP materials) are believed one of the most hopeful matrix materials because of their distinctive multimodal pore structures and tremendous application potentials in the field of biomedicine. However, green and facile synthesis of hierarchically porous nanomaterials with beneficial water dispersibility and biocompatibility is still a great challenge. Herein, a novel biomimetic strategy is proposed to prepare the cell‐tailored double‐shelled HPCaCO3/CaF2 hollow nanospheres under the mediation of yeast cells. The biomolecules derived from the secretion of yeast cells are used as conditioning and stabilizing agents to control the biosynthesis of the HPCaCO3/CaF2 materials, which exhibit excellent water dispersibility and favorable biocompatibility. The double‐shelled CaCO3/CaF2 nanospheres hold hierarchically porous structure and have abundant pore channel and large specific surface area, showing high drug‐loading and a prolonged drug sustainable release profile by the pore‐by‐pore diffusion pattern of the hierarchical pores. Otherwise, the HPCaCO3 with pH‐sensitivity could controllably release drug doxorubicin hydrochloride (DOX) at the acidic tumor microenvironment. Both in vitro and in vivo results demonstrate that HPCaCO3/CaF2 has the sustainable pH‐sensitive drug release property, showing an enhanced therapeutic effect. Summarily, this study provides a biomimetic strategy to synthesize the hierarchically porous double‐shelled hollow nanomaterials for applying in sustainable drug delivery system.

“Turn ON-OFF-ON” photoluminescence detection of EDTA using Moringa oleifera gum-derived carbon dots

This study offers a simplistic approach to hydrothermally synthesizing photoluminescent carbon dots (CDs) using Moringa oleifera Gum (MOG) to detect and quantify EDTA. The as-synthesized Moringa oleifera Gum-derived CDs (MOG-CDs) exhibited an average size of 3.41±0.44 nm and are amorphous. They are naturally doped with calcium and sulphur. Functional groups linked with these heteroatoms and oxygenated linkers are responsible for excellent water dispersibility, good stability, and remarkable optical properties of MOG-CDs. The MOG-CDs demonstrated a high quantum yield of 27.53%. The PL intensity of MOG-CDs was selectively quenched by the introduction of Pb2+ ions, which were further used as a passivating agent for EDTA detection, i.e., the quenched PL can be restored by the addition of EDTA into MOG-CD+Pb2+ system. This Turn “ON-OFF-ON” strategy was used to quantify EDTA with a LOD of 2.6 ppb (8.9 nM). The practicality and viability of the proposed photoluminescent probe were validated by quantifying EDTA in actual samples. The results demonstrated favourable spiked recoveries ranging from 92.59% to 108.69%, indicating a high level of accuracy. Additionally, it displayed excellent reproducibility, as suggested by relative standard deviation (RSD) <5.51%. In parallel, an "IMPLICATION" Boolean logic gate was constructed by employing the PL restoration of the MOG-CD+Pb2+ sensing probe in the presence of EDTA.

Effect of poly(styrene sulfonate) treatment on the structural evolution and sonodynamic performance of PCN-224 nanoparticles

Porphyrin based nanosize metal-organic frameworks (MOFs), such as PCN-224, are promising sonosensitizers for the sonodynamic therapy (SDT) due to their high porphyrin loading capacity and excellent water dispersity. However, the limited pore size of PCN-224 and the close proximity between porphyrins may impede the generation and diffusion of reactive oxygen species (ROS). In this study, a facile ligand exchange method is developed to regulate the structure and the content of tetrakis(carboxyphenyl)-porphyrin (TCPP) in the treated PCN-224 nanoparticles (NPs). Through simple incubation of PCN-224 NPs in poly(styrene sulfonate) (PSS) solution, the ligand exchange between PSS and TCPP happens and a part of TCPP is released to the solution. The ligand exchange results in the transformation of the crystalline structure to amorphous structure of PCN-224, the formation of larger pores and the decrease of surface area. The increased pore size can enhance the generation ability of 1O2 due to the favorable diffusion of substances. This effect can compensate the decreased amount of TCPP in the NPs until the incubation time reaches 8 h in a 2 mg/mL PSS. After balancing the two factors of structure change and TCPP content in the treated PCN-224 NPs, one can achieve their optimal SDT performance. Through a ligand exchange process, this work provides a facile method to regulate the structure of MOFs-based sonosensitizers and their SDT performance.

Investigation of the Application and Mechanism of Nitrogen and Phosphorus Co-doped Carbon Dots for Mercury Ion Detection.

In this paper, we obtained nitrogen and phosphorus co-doped carbon dots through a hydrothermal method using o-phenylenediamine and citric acid in a 40% phosphoric acid environment. The carbon dots emitted fluorescence at 476nm under excitation at 408nm and exhibited good selectivity and high sensitivity towards mercury ions. These carbon dots showed excellent dispersibility in water and maintained stable fluorescence even in high concentration salt environments. The interaction between mercury ions and functional groups on the carbon dots surface through electrostatic interaction resulted in static quenching. Simultaneously, by detecting the lifetime and transient absorption spectra of the carbon dots, we observed that the coordination of mercury ions with the carbon dots broadened the band structure of the carbon dots, and the existing photoinduced electron transfer process increased the non-radiative transition channel. The combined effect of dynamic quenching and static quenching significantly reduced the fluorescence intensity of the carbon dots at 476nm. The carbon dots exhibited linear detection of mercury ions in the range of 0.01-1 µM, with a detection limit as low as 0.0245 µM. In terms of practical water environmental detection applications, these carbon dots were able to effectively detect mercury ions in tap water and lake water, demonstrating their broad application prospects in the field of environmental metal analysis.

Ferroptosis boosted oral cancer photodynamic therapy by carrier-free Sorafenib-Ce6 self-assembly nanoparticles

Oral cancer is a disease with high morbidity and mortality worldwide and greatly impacts the quality of life, especially in patients with advanced stages. Photodynamic therapy (PDT) is one of the most effective clinical treatments for oral cancers. However, most clinically applied photosensitizers have several deficiencies, including oxygen dependence, poor aqueous solubility, and a lack of tumor-targeting ability. Herein, the carrier-free multifunctional Sorafenib (Sor), chlorin e6 (Ce6), and Fe3+ self-assembly co-delivery nanoparticles (Sor-Ce6 NPs) were constructed via combining a ferroptosis inducer Sor and a photosensitizer Ce6 for synergetic therapy. The as-synthesized Sor-Ce6 NPs presented excellent colloidal stability and water dispersity with good in vivo tumor-targeting ability. More significantly, the low dose of Sor-Ce6 NPs had little dark toxicity but produced significantly enhanced ROS and supplied O2 sustainably to increase phototoxicity through ferroptosis pathway. Notably, the Sor-Ce6 NPs showed significantly higher in vitro and in vivo anti-tumor efficacy than the Sor/Ce6 mixture due to the improvement of cellular uptake and the incorporation of foreign Fe ions in the system, which also confer the T1 magnetic resonance-guided imaging ability to the formed Sor-Ce6 NPs. Our study demonstrates a promising self-assembled strategy for overcoming hypoxia-related PDT resistance for oral cancer treatment.

Ionized water-soluble organic nanosheets with light/ultrasound dual excitation channels for efficient killing of multidrug-resistant bacteria.

A novel ionized heavy-atom-free two-dimensional organic nanosheet was prepared and exhibited highly selective generation of singlet oxygen under both light and ultrasound excitation. These ionized nanosheets displayed excellent dispersibility in water and enhanced singlet oxygen production efficiency compared to their non-assembled monomers. Antimicrobial experiments have revealed their potent bactericidal effects on drug-resistant E. coli and S. aureus under both visible light and ultrasound irradiation.

The influence of the polyol solvents on the continuous growth of water-dispersible iron oxide nanoparticles

Magnetic nanoparticles have continued to gain significant attention due to their unique magnetic properties and potential applications. However, it is still challenging to directly synthesize water-dispersible magnetic nanoparticles with controlled size for biomedical applications. This study investigates the influence of solvents on the continuous growth of magnetic nanoparticles, aiming to achieve controlled size and excellent water dispersibility via thermal decomposition in polyol solvents. The size of the nanoparticles gradually increases with longer polyol chain solvents. The increase in nanoparticles size is more significant under a higher reaction temperature (220 °C) compared to a lower temperature (190 °C). These monodispersed nanoparticles exhibit strong superparamagnetic properties, improving with longer solvent chain lengths at the same size. Magnetic resonance imaging (MRI) studies reveal higher relaxivities for magnetic nanoparticles synthesized in longer-chain polyols. This research offers valuable insights for synthesizing magnetic nanoparticles with precise sizes, magnetic properties, and biomedical applications.Graphical abstract

One-step synthesis of cyclodextrin-based fluorescent hyperbranched polymer as type I photosensitizer for effective photodynamic therapy

Photodynamic therapy (PDT) is a promising treatment regime for cancer therapy with some advantages such as minimal invasiveness, high spatiotemporal selectivity, and negligible drug resistance. Developing Type I photosensitizer (PS) is a viable strategy to overcome the limitations of conventional O2-dependent Type Ⅱ PS, whereas there are still significant challenges. Herein, we report the synthesis of β-cyclodextrin-based fluorescent hyperbranched polymer (β-CD-HPG-DEP) through a one-step anionic ring-opening polymerization between β-cyclodextrin (β-CD), glycidol and a fluorescent molecule DEP. The potential utilization of β-CD-HPG-DEP as the agent for cancer phototheranostics was also investigated in detail. The results demonstrated that β-CD-HPG-DEP possesses excellent water dispersibility, good biocompatibility, high reactive oxygen species (ROS) generation efficiency mainly via Type I mechanism, and extraordinary fluorescence imaging capability. Meanwhile, β-CD-HPG-DEP has great potential to serve as drug delivery vehicle since the cyclodextrin unit has many hydroxyl groups, thus providing a promising strategy for designing and fabrication of multifunctional theranostics. Considering the simple synthesis route, ready designability and multifunctional potential of anionic ring-opening polymerization, as well as good biocompatibility of resultant polymer, we believe the strategy developed in this work could also be a rational route to synthesize multifunctional composites for various biomedical applications.

Fabrication of three-dimension hierarchical structure CuO nanoflowers and their antifungal mechanism against Bipolaris sorokiniana

Nanomaterials are widely investigated in sustainable agriculture owing to their unique physicochemical properties, especially Cu-based nanomaterial with eco-friendliness and essential for plant. However, the effect of CuO nanomaterial on Bipolaris sorokiniana (B. sorokiniana) is yet to be systematically understood. In this study, a three-dimension hierarchical structure CuO nanoflower (CuO NF) with ultrathin petals and excellent dispersibility in water was constructed and proved to have outstanding antifungal activity against B. sorokiniana with the inhibition rate of 86 % in mycelial growth, 74 % in mycelial dry weight and 75 % in conidial germination. Furthermore, the antifungal mechanism was assigned to the production of reactive oxygen species in intracellular caused by antioxidant mimicking activity of CuO NF to damage of cell membrane integrity and result cellular leakage. Additionally, the good control effect of CuO NF on wheat diseases caused by B. sorokiniana was demonstrated through pot experiment. This article firstly reveals the antifungal activity and mechanism of CuO NF on B. sorokiniana, and establishes the relationship between enzyme-like activity of CuO NF and its antifungal activity, which provides a promising application of Cu-based nanomaterial as nanofungicide in plant protection and a theoretical foundation for structure design of nanomaterials to improve their antifungal activities.

Highly water-dispersible methylpyridinium salt functionalized reduced graphene oxide and poly(vinyl alcohol) composites

The main issues with developing graphene as a reinforcement are its mono-dispersive properties and strong interfacial bonding between matrix and graphene. In this study, we synthesized reduced graphene oxide (rGO) that is mono-dispersive in polar solvents, by designing structural isomers (-para and -meta) for poly(vinyl alcohol) (PVA) nanocomposites. The hydrazine-methylpyridine synthesized with different structural isomers was used to reduce and functionalize graphene oxide (GO). The -meta structural isomers showed a higher reduction rate and functional groups on GO than -para due to the difference in electrophilic strain. In particular, the prepared rGO reduced by meta-hydrazine-methylpyridine (m-Py-rGO) exhibited excellent mono dispersive characteristics in water solvents as well as in PVA matrix. As a result, nanocomposites containing 1 wt % m-Py-rGO increased in tensile strength and modulus by 48 % (85.95 MPa) and 82 % (4.27 GPa), respectively, compared to pristine PVA. In this study, a method for manufacturing rGO with excellent dispersibility in water, an inexpensive solvent, and its application method are presented.

High dispersibility ratiometric fluorescence sensor designed by functionalized mesoporous silica nanopraticles for sensing and imaging of hydrogen peroxide

Herein, a mesoporous silica nanoparticle (MSN) based ratiometric fluorescence nanosensor (MSN-BA-SiCD) with improved performance was designed for monitoring hydrogen peroxide (H2O2). Specifically, H2O2 response molecule (BA) with AIE feature was synthesized and encapsulated into MSN channel as the fluoresent recognition site. Afterwards, silane-modified carbon dot (SiCD) was covalently connected to the MSN surface which can effectively prevent the leakage of BA and improve the water dispersibility of the nanosensor. The presence of H2O2 could result in a “turn-on” fluorescence of BA as well as concurrent variation in the fluorescence resonance energy transfer (FRET) signal between SiCD and BA. MSN-BA-SiCD displays a specific blue-to-green resolved emission change in response to H2O2 and the detection limit can be as low as 4.78 × 10−6 M. In addition, the nanosensor exhibited enhanced photostability due to the protection of the material framework. Moreover, the nanosensing system was successfully applied to detect H2O2 in beer, orange juice and living cells. The excellent water dispersibility and photostability of the nanosensor, together with high specificity and biocompatibility, constituted an advanced set of characteristics among existing MSNs, which was expected to further promote the development of H2O2 sensors in the environmental and biological fields.

Functionalized magnetic metal organic framework nanocomposites for high throughput automation extraction and sensitive detection of antipsychotic drugs in serum samples

Due to the complexity of biological sample matrix, the automated and high-throughput pretreatment technology is urgently needed for monitoring the antipsychotic drugs for mental patients. In this study, functionalized magnetic zirconium-based organic framework nanocomposites (Fe3O4@SiO2@Zr-MOFs) were successfully designed and synthesized by the layer-by-layer growth. Among them, Fe3O4@SiO2@UiO-67-COOH showed the best adsorption performance, and at the same time it exhibited excellent water dispersibility, high thermal stability, chemical stability and high hydrophobicity. Results of adsorption kinetics, isotherm and FT-IR showed that the adsorption process was dominated by chemical adsorption (hydrogen bond, electrostatic interaction, π-π interaction) and monolayer adsorption. Moreover, the smaller pore size improved the protein exclusion rate which reached 98.9–99.8%. Based on the above result, the synthesized magnetic nanoparticles were introduced to 96-well automatic extractor, antipsychotic drugs in 96 serum samples were automatically extracted within 9 min, which most greatly saved the time and labor costs and avoided artificial errors. By further integrating with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), antipsychotic drugs can be detected in the range of 0.2–3.0 ng mL−1 with a quantitative limit of 0.06–0.9 ng mL−1. The recoveries of antipsychotic drugs and their metabolites in serum ranged from 95.7% to 112.3% within 1.4–6.5% of RSD. These features indicate that the proposed method is promising for high throughput and sensitively monitoring of drugs and other hazardous substances.

Cross-linked polymer nanocomposite networks coated nano sand light-weight proppants for hydraulic fracturing applications

Three-dimensionally cross-linked polymer nanocomposite networks coated nano sand light-weight proppants (LWPs) were successfully prepared via ball-milling the macro sand and subsequently modifying the resultant nano sand with sequential polymer nanocomposite coating. The modified nano sand proppants had good sphericity and roundness. Thermal analyses showed that the samples can withstand up to 411 ℃. Moreover, the proppant samples’ specific gravity (S.G.) was 1.02–1.10 g/cm3 with excellent water dispersibility. Therefore, cross-linked polymer nanocomposite networks coated nano sand particles can act as potential candidates as water-carrying proppants for hydraulic fracturing operations.

Kilogram-Scale Synthesis of Extremely Small Gadolinium Oxide Nanoparticles as a T1-Weighted Contrast Agent for Magnetic Resonance Imaging.

Magnetic resonance imaging contrast agents are frequently used in clinics to enhance the contrast between diseased and normal tissues. The previously reported poly(acrylic acid) stabilized exceedingly small gadolinium oxide nanoparticles (ES-GdON-PAA) overcame the problems of commercial Gd chelates, but limitations still exist, i.e., high r2/r1 ratio, long blood circulation half-life, and no data for large scale synthesis and formulation optimization. In this study, polymaleic acid (PMA) is found to be an ideal stabilizer to synthesize ES-GdONs. Compared with ES-GdON-PAA, the PMA-stabilized ES-GdON (ES-GdON-PMA) has a lower r2/r1 ratio (2.05, 7.0 T) and a lower blood circulation half-life (37.51min). The optimized ES-GdON-PMA-9 has an exceedingly small particle size (2.1nm), excellent water dispersibility, and stability. A facile, efficient, and environmental friendly synthetic method is developed for large-scale synthesis of the ES-GdONs-PMA. The weight of the optimized freeze-dried ES-GdON-PMA-26 synthesized in a 20L of reactor reaches the kilogram level. The formulation optimization is also finished, and the concentrated ES-GdON-PMA-26 formulation (CGd=100mm) after high-pressure steam sterilization possesses eligible physicochemical properties (i.e., pH value, osmolality, viscosity, and density) for investigational new drug application.

A food-grade and senescent cell-targeted fisetin delivery system based on whey protein isolate-galactooligosaccharides Maillard conjugate

Cellular senescence is the results of aging and age-related diseases, and the development of anti-aging methods may improve health and extend longevity. The natural flavonol fisetin has been shown to antagonize senescence in vitro and increases longevity in vivo, but has poor water solubility and limited bioavailability. In this study, a food-grade and senescent cell-targeted delivery system for fisetin was developed based on whey protein isolate-galactooligosaccharides (WPI-GOS) Maillard conjugate, which could recognize senescence associated β-galactosidase in senescent cells. The fisetin nanoparticles possessed a high encapsulation efficiency, excellent dispersibility in water, good storage stability and well biocompatibility. Moreover, they could effectively accumulate and retain in senescent cells with excellent senescent cell-targeting efficacy, and inhibit the oxidative stress-induced cellular senescence in vitro. Thus, this novel nanoparticle system based on WPI-GOS Maillard conjugate showed promise to deliver hydrophobic bioactive ingredients like fisetin to senescent cells to improve their bioavailability and anti-senescence effect.

Highly efficient color-tunable organic co-crystals unveiling polymorphism, isomerism, delayed fluorescence for optical waveguides and cell-imaging

Photofunctional co-crystal engineering strategies based on donor-acceptor π-conjugated system facilitates expedient molecular packing, consistent morphology, and switchable optical properties, conferring synergic ‘structure-property relationship’ for optoelectronic and biological functions. In this work, a series of organic co-crystals were formulated using a twisted aromatic hydrocarbon (TAH) donor and three diverse planar acceptors, resulting in color-tunable solid and aggregated state emission via variable packing and through-space charge-transfer interactions. While, adjusting the strength of acceptors, a structural transformation into hybrid stacking modes ultimately results in color-specific polymorphs, a configurational cis-isomer with very high photoluminescence quantum yield. The cis-isomeric co-crystal exhibits triplet-harvesting thermally activated delayed fluorescence (TADF) characteristics, presenting a key discovery in hydrocarbon-based multicomponent systems. Further, 1D-microrod-shaped co-crystal acts as an efficient photon-transducing optical waveguides, and their excellent dispersibility in water endows efficient cellular internalization with bright cell imaging performances. These salient approaches may open more avenues for the design and applications of TAH based co-crystals.

Aggregation-Induced Enhanced Electrochemiluminescence from Tris(bipyridine)ruthenium(II) Derivative Nanosheets for the Ultrasensitive Detection of Human Telomerase RNA.

The traditional tris(bipyridine)ruthenium(II) complex suffers from the notorious aggregation-caused quenching effect, which greatly compromises its electrochemiluminescence (ECL) efficiency, thus hindering further applications in biosensing and clinical diagnosis. Here, the ultrathin tetraphenylethylene-active tris(bipyridine)ruthenium(II) derivative nanosheets (abbreviated as Ru-TPE NSs) are synthesized through a protein-assisted self-assembly strategy for ultrasensitive ECL detection of human telomerase RNA (hTR) for the first time. The synthesized Ru-TPE NSs exhibit the aggregation-induced enhanced ECL behavior and excellent water-dispersion. Surprisingly, up to a 106.5-fold increase in the ECL efficiency of Ru-TPE NSs is demonstrated compared with the dispersed molecules in an organic solution. The restriction of intramolecular motions is confirmed to be responsible for the significant ECL enhancement. Therefore, this proposed ECL biosensor shows high sensitivity and excellent selectivity for hTR based on Ru-TPE NSs as efficient ECL beacons and the catalytic hairpin assembly as signal amplification, whose detection limit is as low as 8.0fm, which is far superior to the previously reported works. Here, a promising analytical method is provided for early clinical diagnosis and a new type of efficient ECL emitters with great application prospects is represented.

Bendable transparent films from cellulose nanocrystals–Study of surface and microstructure-property relationship

The presented work focuses on preparing transparent bendable films from nanocellulose. In comparison to cellulose nanofibrils and bacterial cellulose, nanocrystalline cellulose are shorter and have higher crystallinity (CI<95 %). Sulfated CNC (CNCIH-OSO3H) were prepared, and by changing their counter ions from H+ to Na+ and Et4N+ (Tetraethyl ammonium) flexible films were prepared with a strength of 70.5 MPa and 2.6 % elongation at break. The CNC suspensions showed excellent dispersibility in DI water with Zeta-potential (ζ) values > -35 mV. In the preparation of films, pre-sonication was key in improving the tensile strength and improved elongation (>30 % increase compared to films prepared without sonication) and hydrophobicity. The change of counter ion, H+ to Na+ or Et4N+, improved the thermal and mechanical properties of CNC films. The films were investigated with UV–Vis spectroscopy and optical polarized spectroscopy to explain the arrangement of nanocellulose crystals in correlation with the mechanical properties. The wettability of CNC samples was also studied and explained in detail. CNC from CelluForce was also studied as commercial reference samples. The modified CNC films have adequate properties for application in flexible electronics, energy storage, and biodegradable smart packaging.

Anticorrosive coatings made from polydopamine modified graphitic C3N4 composites with synergistic anticorrosion effects

Since uniform dispersion and robust interfacial compatibility of nanofiller with epoxy resin are the most critical parameters to improve the corrosion protection property, a new effective anticorrosion nanofiller [polydopamine (PDA)@g-C3N4-CeO2] is designed by stacking PDA modified g-C3N4 and nano-CeO2 with the help of a silane coupling agent. The structure and morphology of PDA@g-C3N4-CeO2 are characterized by FTIR, XRD, XPS, SEM, and TEM. Furthermore, the PDA@g-C3N4-CeO2 nanofiller is loaded within waterborne epoxy coating (WEC) and the corrosion resistance of the prepared nanocomposite coating is studied. It can be inferred from the dispersion test that g-C3N4 modified by PDA and nano-CeO2 exhibits excellent dispersion and compatibility in de-ionized water. The Electrochemical impedance spectroscope (EIS) results indicate that nanocomposite coating with PDA@g-C3N4-CeO2 exhibits the best corrosion resistance, and its low-frequency impedance (Zf=0.01Hz) is 1.78 × 109 Ω cm2, which is two orders of magnitude higher than that of pure WEC (4.27 × 107 Ω cm2). In the salt spray test, PDA@g-C3N4-CeO2/WEC also showed excellent long-term corrosion resistance with few corrosion products even after 600 h, which was consistent with the results of the EIS test. In addition, PDA@g-C3N4-CeO2/WEC also reflects the most fantastic adhesion strength (14.22 MPa), which is improved by 45.40% than that of pure WEC (9.78 MPa). Generally, the excellent protection properties of PDA@g-C3N4-CeO2/WEC are attributed to the presence of PDA and KH-550 modified nano-CeO2 on the surface of g-C3N4, which increase the compatibility and surface interactions between nanofillers and epoxy resin.