Excellent Thermal Stability Research Articles

Synthesis, optical characterization and electrical behavior of chitosan/MgO/Cr2O3 nanocomposite for electrical applications

Magnesium oxide nanoparticles (MgO NPs) are straightforward, cheap, biocompatible, and biodegradable, making them one of the most popular inexpensive and non-toxic nanoparticles. In addition, Nanosized chromic oxide (Cr2O3) is a significant transition metal oxide due to its numerous exceptional attributes, it finds application in several domains. It has good electrical conductivity, excellent thermal and chemical stability. It is utilized in several industries for its ability to resist oxidation at high temperatures, as well as its application in refractory materials and catalysts. In this study, we utilized a laser ablation approach to synthesize a ternary nanocomposite composed of MgO and Cr2O3 nanoparticles as it is considered a clean method for the preparation of nanoparticles. Subsequently, these nanoparticles were integrated into Chitosan (CS) solution to create polymer nanocomposite via casting route. XRD confirmed the formation of Cr2O3 nanocrystals with size of 61 nm dispersed in chitosan/MgO matrix. FTIR verified the interactions between chitosan, MgO, and Cr2O3 nanoparticles. The broadening and shifting of the OH and NH bands with increasing Cr2O3 content confirms the interaction and complexation between Cr2O3 and Chitosan/MgO. UV–Vis analysis revealed that incorporating 7 wt% Cr2O3 reduced optical band gap from 5.59 eV for chitosan to 3.91 eV. The band gap values decreased with increasing Cr2O3 content due to polaronic defects. TGA showed improved thermal stability, with the 7 wt% Cr2O3 nanocomposite exhibiting a residual mass of 47 % at 700 °C compared to 28 % for chitosan. Dielectric studies demonstrated high dielectric constant and conductivity (10−5 S/cm at 10 Hz) values for the 7 wt% Cr2O3 nanocomposite, attributed to interfacial polarization effects and nanocapacitor formation by the conductive nanofillers. The ternary chitosan/MgO/Cr2O3 nanocomposites with tunable optical, thermal and electrical properties show promising potential for electronic applications.

Spectral studies of thermally stable Dy3+/Sm3+ co-doped Li2Ba5W3O15 phosphors for warm white LEDs

In the current study, a series of Li2Ba5W3O15: RE3+ (RE = Dy, Sm) [LBW:Dy3+/Sm3+] phosphors were prepared using a high-temperature solid-state method. X-ray diffraction, Scanning electron microscopy with energy-dispersive x-ray analysis scans showed that the crystal form was consistent with the standard LBW and comprised small irregularly shaped particles. Diffuse reflectance spectral (DRS) data was utilized to calculate the band gaps. Fluorescence study shows that LBW material doped with Dy3+ and Sm3+ yield distinct colors at 496 nm (blue) for Dy3+ and 582 nm (green-yellow), 612 nm (yellow), and 669 nm (red) for Sm3+ when excited by near-ultraviolet (336 nm) light. The observation of energy transfer between Dy3+ and Sm3+ ions play a role in modifying the luminescence of LBW:Dy3+/Sm3+ co-doped phosphors. With a constant excitation wavelength (λ Ex), different levels of activator doping lead to a change in the emission colors from their neutral white light to a deep orange-red region for LBW:Dy3+/Sm3+ phosphors. The decay curves demonstrate a decrease in lifetime with an increase in the concentration of activator ions (Sm3+). For D3S5 phosphor, the temperature-dependent photoluminescence characteristics were analyzed under λ Ex = 336 nm excitation. The results indicate excellent luminescence thermal stability with an activation energy of 0.16 eV at λ Ex = 336 nm. With its low color-correlated temperature and good thermal stability, the prepared phosphor sample shows potential as a solid-state emitting phosphor that can be used with UV chip stimulation for warm white LED applications.

Thermal‐mechanical properties of bamboo charcoal/recycled low‐density polyethylene composites

AbstractBamboo fiber has garnered considerable attention owing to its high specific strength and renewability. However, the hydrophilic nature of the material must be carefully managed to create a bamboo composite with usable thermal‐mechanical properties. Herein, the NaOH‐treated bamboo fiber (particle size ≤200 μm) was used to produce bamboo charcoal (BC). Then, recycled low‐density polyethylene containing BC composites was fabricated by varying the BC composition (between 2 and 8 wt%). Effects of different BC wt% in the BC/recycled low‐density polyethylene composites (denoted as xBCPE, where x indicates BC wt% in the composites) were analyzed for tensile strength, morphology, and thermal properties. In addition, the water absorption capacities of the BCPE composites were compared. These xBCPE composites showed excellent thermal stability and low water absorption properties. Therefore, they are potential candidate materials for electrical device packaging with partial degradability.Highlights Bamboo charcoal (BC) was prepared via low‐temperature pyrolysis of alkaline‐treated bamboo fiber. BC displayed strong interfacial interaction with recycled low‐density polyethylene. Proportion of BC on the composite properties was investigated and furnished. The xBCPE composites demonstrate low water absorption and excellent thermal stability. The reinforced composite (4BCPE) shows great promise as a functional material.

Crystallization management and defect passivation via additive engineering for efficient and stable carbon-based CsPbI2Br perovskite solar cells

Inorganic CsPbI2Br perovskite solar cells (PSCs) have attracted enormous interest due to their excellent thermal stability and immense potential for application in tandem solar cells. However, the rambunctious crystallization and poor film quality of inorganic CsPbI2Br perovskite are the main factors limiting their performance improvement. Herein, dibenzoylmethane (DBM), containing electron-rich and dual CO functional groups, as an efficient precursor additive, is first introduced to regulate the crystallization of CsPbI2Br perovskite while passivating its associated defects. After DBM modification, nucleation is accelerated and the crystallinity of CsPbI2Br film is improved, thus promoting the phase stability. Additionally, DBM can passivate uncoordinated Pb2+ defects, thereby significantly reducing non-radiative recombination, and can also decrease the energy level difference between CsPbI2Br/Carbon. As a result, when DBM additive is incorporated in the CsPbI2Br, the power conversion efficiency (PCE) of the device with the fluorine doped tin oxide glass (FTO)/SnO2/CsPbI2Br/Carbon structure is significantly improved to 13.46 %, an increase of nearly 13 % compared to the control device (11.72 %). The unpackaged devices exhibit excellent air and thermal stability, still remaining over 90 % of its initial PCE after aging for 500 h under ambient conditions, or continuous heating at 65 °C in glovebox for 500 h, respectively.

3D Printed P(VdF‐HFP)/SBA‐15 composite‐based gel polymer electrolyte versus commercial celgard: A comparative investigation on thermal stability and electrochemical performance for lithium‐ion battery application

AbstractThe current work reports on tailoring of 3D printed gel polymer electrolyte (GPE) employing poly(vinylidene fluoride‐co‐hexafluoropropylene) P(VdF‐HFP) as the host matrix and mesoporous Santa Barbara Amorphous‐15 (SBA‐15) mesoporous sieve as ceramic filler. Further, this work envisages an investigation on its physicochemical properties, thermal shrinkage behavior, and electrochemical performance. An effort has been undertaken to formulate 3D printable P(VdF‐HFP)/SBA‐15 composite‐based GPE ink with suitable rheological properties. The breath figure method is followed to investigate the influence of 1‐methyl‐2‐pyrrolidinone (NMP)/tetrahydrofuran (THF) mixture as a solvent on the porosity of 3D printed GPE, through which enhanced porosity is evident from scanning electron microscopy (SEM) analysis. The morphological analysis further confirms the hybrid porous structure facilitated by the addition of SBA‐15 into the P(VdF‐HFP) matrix. The 3D printed P(VdF‐HFP)/SBA‐15 (10%) composite‐based GPE shows promising ionic conductivity in the order of 0.2 × 10−4 S/cm at room temperature and demonstrates excellent dimensional thermal stability up to 175°C. The electrochemical measurement of 3D printed GPE is tested separately using 3D printed cathode half‐cell (3D printed LFP vs. Li+) and 3D printed anode half cell (3D printed LTO vs. Li+) with GPE as separator. Further, also tested with conventionally prepared electrode and the coin cell studies show discharge capacity of 3D printed P(VdF‐HFP)/SBA‐15 (10%) composite‐based GPE is comparable to commercial celgard separator. All these features speculate that the 3D printed fabricated in the current work may find potential application in lithium‐ion battery.

Colorless and transparent polyimide nanocomposites using organically modified montmorillonite and mica

In this study, we introduce a method for replacing the glass used in existing display electronic materials, lighting, and solar cells by synthesizing a colorless and transparent polyimide (CPI) film with excellent mechanical properties and thermal stability using a combination of new monomers. Poly(amic acid) (PAA) was synthesized using dianhydride 4,4′-biphthalic anhydride (BPA) and diamine 2,2-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (AHP). Various contents of organically modified montmorillonite (MMT) and mica were dispersed in PAA solution through solution intercalation, and then CPI hybrid films were prepared through multi-step thermal imidization. The organoclays synthesized to prepare CPI hybrid films were Cloisite 93A (CS-MMT) and hexadimethrine-mica (HM-Mica) based on MMT and mica, respectively. In particular, the diamine monomer AHP containing a –OH group was selected to increase the dispersibility and compatibility between the hydrophilic clays and the CPI matrix. To demonstrate the characteristics of CPI, the overall polymer structure was bent and a strong electron withdrawing –CF3 group was used as a substituent. The thermomechanical properties, morphology of clay dispersion, and optical transparency of the CPI hybrid films were investigated and compared according to the type and content of organoclays. Two types of organoclays, CS-MMT and HM-Mica, were dispersed in a CPI matrix at 1 to 7 wt%, respectively. In electron microscopy, most of the clays were uniformly dispersed in a plate-like shape of less than 20 nm at a certain critical content of the two types of organoclays, but agglomeration of the clays was observed when the content was higher than the critical content. Hybrids using HM-Mica had better thermomechanical properties and hybrids containing CS-MMT had better optical transparency.

Multi-phase shear thickening fluid based on ionic liquid dispersion medium for impact resistance and wear protection

Shear thickening fluids (STFs) have attracted increasing attention as smart materials with unique rheological properties. However, the preparation of STFs usually relies on a composite system of spherical nanoparticles with polyethylene glycol. In this work, novel multi-phase STFs (ILSTFs) were prepared in an ionic liquid by incorporating nanosized SiO2 and rod-shaped calcium metasilicate (CaSiO3) particles as a dispersed phase. Compared to traditional STFs, ILSTFs demonstrate excellent thermal stability. Rheological tests indicate that ILSTFs exhibit continuous shear thickening behavior, resulting in excellent energy absorption and impact wear resistance. In addition, ILSTFs can serve as a new type of lubricant. The tribological properties and impact resistance of ILSTFs were highly correlated with the shear thickening effect, with the multi-phase ILSTF system with CaSiO3 demonstrating superior impact wear resistance compared to the single-phase system. In this study, finite element analysis (FEA) is further utilized to investigate the local damage evolution and energy absorption rate of STF under impact loading, providing insights into the underlying mechanism. This ionic liquid-based STF holds promise for applications as a flexible filling component in the fields of lubrication technology and impact protection structures.

Diamond with Sp2-Sp3 composite phase for thermometry at Millikelvin temperatures

Temperature is one of the seven fundamental physical quantities. The ability to measure temperatures approaching absolute zero has driven numerous advances in low-temperature physics and quantum physics. Currently, millikelvin temperatures and below are measured through the characterization of a certain thermal state of the system as there is no traditional thermometer capable of measuring temperatures at such low levels. In this study, we develop a kind of diamond with sp2-sp3 composite phase to tackle this problem. The synthesized composite phase diamond (CPD) exhibits a negative temperature coefficient, providing an excellent fit across a broad temperature range, and reaching a temperature measurement limit of 1 mK. Additionally, the CPD demonstrates low magnetic field sensitivity and excellent thermal stability, and can be fabricated into probes down to 1 micron in diameter, making it a promising candidate for the manufacture of next-generation cryogenic temperature sensors. This development is significant for the low-temperature physics researches, and can help facilitate the transition of quantum computing, quantum simulation, and other related technologies from research to practical applications.

Thermoplastic polyimide with good comprehensive performance based on carbazole groups and short flexible linkages

AbstractThermoplastic polyimides (TPIs) can meet the requirements of advanced electronic packaging such as flexible copper clad laminate (FCCL) applied under extreme conditions, attributed to their excellent thermal stability, mechanical properties, electrical insulation and chemical resistance. With the increasing demands for electronic devices, such as applications in high‐frequency communication, it is highly desirable to develop high‐performance TPI with good thermoplasticity, thermal stability, mechanical properties and dielectric properties. However, there is a trade‐off between thermoplasticity and other properties. Herein, we introduce an effective strategy to afford TPIs with good performance by copolymerization of a diamine monomer consisted of a coplanar aromatic carbazole group and a short flexible linkage methylene group. On the one hand, short flexible linkages help improve the flexibility of polymer chains and are not too much to enable small‐scale molecular motions below Tg. On the other hand, coplanar aromatic donor groups benefit to strong charge transfer complex (CTC) interaction and π‐π stacking interaction. Based on this strategy, the resultant TPI possesses good thermoplasticity with a proper Tg of 348 °C. Meanwhile, it preserves a low coefficient thermal expansion of 48 ppm K−1, low dielectric constant/dielectric loss factor of 3.27/0.0073 at 10 GHz, and tensile strength of ca. 78 MPa.

Synthesis and chromatographic isolation of blue, green, and orange emissive carbon dots with high quantum yields from Taraxacum

Carbon dots (CDs) have emerged as a novel class of fluorescent nanomaterials with superior optical properties and biocompatibility compared to traditional quantum dots. This study demonstrates a facile approach for synthesizing high quantum yield tricolor CDs from the natural precursor dandelion via a one-step solvothermal treatment. Chromatographic separation successfully yielded blue, green, and orange emissive CDs with emission peaks at 481 nm, 530 nm, and 587 nm respectively. Structural and optical characterization revealed the CDs possess excellent photostability, salt resistance, and thermal stability, alongside high quantum yields, measured at 43.8 %, 32.9 %, and 48.1 % for B-CDs, G-CDs, and O-CDs, respectively. Taking advantage of the unique properties of the tricolor CDs, their application in analytical sensing was explored using metal ion detection. The CDs displayed selective quenching responses towards Fe3+, Pb2+, and Sn4+ respectively, with strong anti-interference capabilities. This work provides a sustainable and efficient strategy for producing high-performance multicolor CDs, holding significant implications for reducing the synthesis cost of carbon dots and expanding their application spectrum.

Improved interfacial adhesion of carbon fiber‐reinforced polydicyclopentadiene layered composite material by modification of norbornene derivatives

AbstractSurface chemical grafting modifications of carbon fibers (CFs) using 5‐(triethoxysilyl)norbornene (TOS), norbornene carboxylic acid tert‐butyl ester (NB‐TBE), and 5‐norbornene‐2,3‐dicarboxylic anhydride (NA) improved interfacial interactions between CFs and poly(dicyclopentadiene) (PDCPD) resin. The ring‐opening metathesis polymerization (ROMP) of DCPD, catalyzed by Grubbs catalyst II, enabled the fabrication of PDCPD/CF layered composite materials with resin and fibers tightly adhered. The optimal composite exhibited remarkable mechanical properties, with a tensile strength of 654.6 MPa and flexural strength of 510.7 MPa. Excellent thermal stability with a maximum weight loss rate in temperatures above 450°C and good chemical resistance with a weight change of about 1% in both acidic and alkaline media highlight the promising potential of these materials for use in harsh environments. The simple yet efficient approach of TOS, NB‐TBE, and NA‐enhanced layered CF shows great promise as advanced composite materials for industrial applications.Highlights Norbornene derivatives such as TOS, NB‐TBE, and NA are suitable modifiers for CF. ROMP of DCPD and norbornene group onto CFs, fabrication of PDCPD/CF composite materials. The composite exhibited remarkable interfacial adhesion and mechanical properties.

Unveiling the potential of cellulose, chitosan and polylactic acid as precursors for the production of green carbon nanofibers with controlled morphology and diameter

Carbon nanofibers (CNFs) are very promising materials with application in many fields, such as sensors, filtration systems, and energy storage devices. This study aims to explore the use of eco-friendly biopolymers for CNF production, finding novel, suitable and sustainable precursors and thus prioritising environmentally conscious processes and ecological compatibility.Polymeric nanofibers (PNFs) using cellulose acetate, polylactic acid, and chitosan as precursors were successfully prepared via electrospinning. Rheological testing was performed to determine suitable solution concentrations for the production of PNFs with controlled diameter and appropriate morphology. Their dimensions and structure were found to be significantly influenced by the solution concentration and electrospinning flow rate. Subsequently, the electrospun green nanofibers were subject to stabilisation and carbonisation to convert them into CNFs. Thermal behaviour and chemical/structural changes of the nanofibers during stabilisation were investigated by means of thermogravimetric analysis and Fourier-transform infrared spectroscopy, while the final morphology of the fibers after stabilisation and carbonisation was examined through scanning electron microscopy to determine the optimal stabilisation parameters. The optimal fabrication parameters for cellulose and chitosan-based CNFs with excellent morphology and thermal stability were successfully established, providing valuable insight and methods for the sustainable and environmentally friendly synthesis of these promising materials.

DEGRADATION ESTIMATION OF ROSUVASTATIN CALCIUM IN PHARMACEUTICAL TABLET FORMULATION

Objectives: The present objective was to undertaken the Rosuvastatin Calcium degradation in the tablets formulations with a rapid, economic, consistent, specific and simple analytical procedure. Methods: The analytical RP-HPLC was validated with mobile phase composition of methyl alcohol : cyanomethane : water (45:35:20,v/v). The detection was achieved with a flow 1.0 ml/min by using octylsilane column (250 x 4.6 mm, 5 µ), at 248 nm. Results: The established analytical procedure of Rosuvastatin Calcium was validated statistically for reproducibility, accuracy, specificity as per ICH-guideline. The correlation coefficient was 0.999 with the linearity concentration range 140-260 µg/ml. The percentage recovery was achieved 99.86 to 106.12 and RSD% of precision was 0.599. The specificity was confirmed by excellent photolytic and thermal stability of Rosuvastatin Calcium. The degradation statistical recovery of Rosuvastatin Calcium in dry, wet and thermal stage ware 99.25%, 99.52 % and 99.64% respectively validated. The developed peaks in the chromatograms of alkali, oxidation and acid decomposition of Rosuvastatin Calcium were confirmed by screening the degradation peaks and the recovery percentage were found 23.16 %, 85.59 % and 66.33 % respectively. Conclusions: The stress conditions of Rosuvastatin Calcium in degradation study is successfully developed and it is also important in stability to determined the highest lipid lowering agent in the body that block the manufacturing of cholesterol. The stress conditions like in aqueous acidic hydrolysis, oxidative, alkaline hydrolysis, thermal and photolytic degradation study was validated with a simple, cost efficient, linear, accurate, selective, specific, high performance liquid chromatography with a simple effortless mobile phase containing methyl alcohol, cyanomethane and water.

Synthesis, characterization, and optical studies of lead-free perovskite, Cs3M2Br9 (M = Bi, Sb) nanocrystals

In recent years, there has been a surge in research interest surrounding all inorganic lead perovskite nanocrystals (NCs) owing to their exceptional performance in various optoelectronic devices. Nevertheless, the presence of lead and concerns regarding its toxicity and stability have cast a shadow over their potential wide-ranging applications. In this study, we present the synthesis of two lead-free all-inorganic perovskite materials, Cs3M2Br9 (where M = Bi or Sb), in bulk form, using an aqueous halide acid medium. Additionally, we describe a top-down approach for the fabrication of two lead-free all-inorganic perovskite, Cs3M2Br9 (M = Bi or Sb) NCs. The Cs3Sb2Br9 NCs display a sheet-like morphology, while Cs3Bi2Br9 NCs exhibit a cubic structure. The PL spectra of Cs3Sb2Br9 and Cs3Bi2Br9 NCs exhibit distinct emission peaks at 476 nm and 472 nm, respectively, with relatively narrow full width at half maximum (FWHM) of 44 nm and 38 nm, respectively. Cs3Sb2Br9 and Cs3Bi2Br9 NCs demonstrate excellent thermal stability up to 320 °C and 470 °C, respectively. Notably, the high photoluminescence quantum yield (PLQY) of these NCs, Cs3Sb2Br9 NCs (31 %) and Cs3Bi2Br9 NCs (36 %) are highly beneficial for optoelectronic applications is observed.

Solvent free Potassium 3,5-dinitro-6-oxo-1,6-dihydropyrazin-2-olate 3D EMOF as thermally stable energetic material.

Heat-resistant explosives play a vital role in indispensable applications. For this, we have synthesized a novel, three-dimensional, solvent-free energetic metal-organic framework (EMOF) potassium 3,5-dinitro-6-oxo-1,6-dihydropyrazin-2-olate (KDNODP) straightforwardly. The synthesized EMOF was characterized through IR, NMR spectroscopy, elemental analysis, and differential scanning calorimetry studies. Furthermore, single-crystal X-ray diffraction provided a complete description of KDNODP. It exhibits a three-dimensional EMOF structure with remarkably balanced properties such as high density (2.11 g cm-3), excellent thermal stability (291 ℃), good detonation performance (8127 m s-1 and 26.94 GPa) and low mechanical sensitivity (IS = 35 J; FS = 360 N) than the commonly used heat-resistant explosives HNS (density = 1.74 g cm-3; VOD = 7164 m s-1, DP = 21.65 GPa, IS = 5 J) as well as the similar reported energetic potassium MOFs. To gain insights into the packing and intermolecular interactions, the Hirshfeld surface and a 2D fingerprint analysis were examined. Additionally, scanning electron microscopy was used to investigate the particle size and morphological characteristics of KDNODP. These outcomes highlight a successful method for creating 3D EMOF based on a six-membered heterocycle as a potential heat-resistant energetic material.

Low-Temperature Cross-Linked Hole Transport Layer for High-Performance Blue Quantum-Dot Light-Emitting Diodes.

Quantum-dot light-emitting diodes (QLEDs), a kind of promising optoelectronic device, demonstrate potential superiority in next-generation display technology. Thermal cross-linked hole transport materials (HTMs) have been employed in solution-processed QLEDs due to their excellent thermal stability and solvent resistance, whereas the unbalanced charge injection and high cross-linking temperature of cross-linked HTMs can inhibit the efficiency of QLEDs and limit their application. Herein, a low-temperature cross-linked HTM of 4,4'-bis(3-(((4-vinylbenzyl)oxy)methyl)-9H-carbazol-9-yl)-1,1'-biphenyl (DV-CBP) with a flexible styrene side chain is introduced, which reduces the cross-linking temperature to 150 °C and enhances the hole mobility up to 1.01 × 10-3 cm2 V-1 s-1. More importantly, the maximum external quantum efficiency of 21.35% is successfully obtained on the basis of the DV-CBP as a cross-linked hole transport layer (HTL) for blue QLEDs. The low-temperature cross-linked high-mobility HTL using flexible side chains could be an excellent alternative for future HTL development.

Two AIE-Ligand-Based 2-D Luminescent Metal-Organic Frameworks as Fe3+ Sensors.

The design and synthesis of high-performance sensors are very important but remain great challenges. In this work, a new aggregation-induced-emission (AIE) molecule 4,4'-(((9H-fluoren-9-ylidene)methylene)bis(4,1-phenylene))dipyridine (L) was successfully synthesized and first developed as a functional ligand to construct two isomorphic metal-organic frameworks (MOFs) [M(L)(OBBA)]n [M2+ = Cd2+ (1), Co2+ (2); H2OBBA = 4,4'-oxybisbenzoic acid]. They adopt [M2(COO)4] flywheel clusters, OBBA2- bridges, and terminal L ligands as building units to form isomorphic 2-D networks with Lewis base active cites (uncoordinated pyridyl N). Both 1 and 2 exhibit excellent water, pH, and thermal stabilities and extremely efficient Fe3+ sensing abilities in the water environment. The quenching constants and detection limits reach the best levels reported so far. The sensing mechanism of 1 and 2 toward Fe3+ is studied in depth, and the difference in their sensing performance is also explained.

Preparation of high‐barrier performance paper‐based materials from biomass‐based silicone‐modified acrylic polymer emulsion

AbstractHigh‐barrier performance, especially under extreme working conditions, is the key to replacing other types of packaging materials with paper‐based materials. In this paper, two biomass‐based polymers, sodium alginate (SA), and chitosan, were used to form a barrier coating with silicone emulsions to prepare a high‐performance paper‐based barrier material. By double coating, the water and oilproof functions were superimposed. The two prepared coated papers were characterized by infrared spectroscopy analysis, contact angle test, and scanning electron microscopy analysis, while their water resistance, oil resistance, thermal oil resistance, and thermal stability were tested. The water and oil repellency were achieved by double coating. The Cobb value of the chitosan‐silicone emulsion‐coated paper reached 5.3 g/m2, with a Kit grade of Level 12, and could block the penetration of castor oil at 80°C within 24 h. The Cobb value of the sodium alginate‐silicone emulsion‐coated paper was 41.6 g/m2, much higher than that of the uncoated paper, with a Kit grade of up to Level 10, which could slow down the rate of castor oil penetration at 80°C within 24 h. The test results showed that there was no chemical reaction between the paper‐based coatings, and the coated paper surface had good film formation, while the double coating method increased the thermal decomposition temperature of the overall barrier coating, effectively improving the thermal stability of the coating and achieving high‐barrier performance at lower cost and under extreme working conditions.Highlights Water and oil resistance under extreme operating conditions. High‐performance paper‐based barrier materials. Dual‐layer coating method for water and oil repellency. High‐barrier performance at lower cost. Excellent hot oil resistance and thermal stability.

Self-floating and long-term stable Ti3C2TX/polyurethane composite membranes with highly efficient photothermal conversion performances for multiple applications

Photothermal conversion has emerged as a highly effective method for converting solar energy into thermal energy for a variety of applications. In this study, we developed Ti3C2TX/PU membranes with exceptional photothermal conversion performance using a simple casting process. The Ti3C2TX/PU membranes are flexible, self-floating, and possess suitable strength and hydrophilicity. Additionally, they exhibit enhanced sunlight absorption capability and excellent thermal stability. When these membranes were applied for solar-driven seawater evaporation, they achieved an evaporation rate of 1.35 kg∙m−2 h−1 and a conversion efficiency of 84.85 % under 1 sun. In real outdoor conditions, they also displayed satisfactory evaporation performance. Impressively, the Ti3C2TX/PU membranes exhibited stable salt resistance and remarkable self-desalting properties, which are crucial for practical seawater evaporation applications. Furthermore, we observed that the photothermal performance of the Ti3C2TX/PU membranes improved with a higher Ti3C2TX content. Particularly noteworthy is the significant reduction in ice melting time when these membranes are wrapped around power wires, demonstrating their excellent photothermal deicing capabilities. The Ti3C2TX/PU membranes also showed promising application potential in low-temperature photothermal therapy treatment. We believe that such efficient and stable photothermal membranes will provide a sustainable solution for addressing challenges related to human health, life, and survival.

Suppressing Self‐Oxidation of Eu2+ in Li2CaSiO4 for Full‐Spectrum Lighting and Accurate Temperature Sensing

AbstractEu2+‐doped phosphors have attracted the great attention of researchers in the past decade. However, Eu2+ dopant in inorganic hosts often suffers from the self‐oxidation effect, therefore causing the attenuated emission intensity and quantum efficiency. In this regard, developing Eu2+ doped phosphors with the prohibited self‐oxidation effect of Eu2+ and increased thermal stability is urgently required. Herein, an innovative cyan‐light emitting Li2CaSiO4:Eu2+/Eu3+, Lu3+ (LCSO) phosphor is designed. Both experimental results and theoretical calculations demonstrate that adding Lu3+ restricts the self‐oxidation of Eu2+ into Eu3+, thus improving the emission of Eu2+. Meanwhile, the Lu3+ introduction brings out excellent thermal stability. Finally, an efficient WLED with a color temperature (CCT) of 4573 K and a high color rendering index (Ra) of 84.2 is obtained using the as‐prepared phosphor due to the perfect compensation of the cyan light. As the introduction of Lu3+ improves the stability of Eu2+, a much greater difference in PL decay rate between Eu2+ and Eu3+ in LCSO is reached, thereby improving their sensitivity in temperature sensing. The strategy of Lu3+ introduction for prohibiting the self‐oxidation of Eu2+ for efficient and stable Eu2+ emission may stimulate some new ideas in designing high‐performance phosphors for more diverse applications.