Excellent Activity Research Articles

Sago-shaped embedded nanolayers of WO3/NiO/gC3N4 nanohybrids for natural degradation of environmental pollutants: A photocatalytic sunlight mediated approach

In recent years the applicability of semiconductor nanomaterials is almost in every field of science and technology. In the current study, hybrid nanomaterials containing tungsten trioxide (WO3) and nickel oxide (NiO) supported on graphitic carbon nitride (gC3N4) were prepared by a simple hydrothermal technique. Synthesis was sequential requiring the individual preparation of gC3N4 and WO3 as preliminary. The desired composition of gC3N4, WO3, nickel nitrate, and a base was transferred to an autoclave and maintained at 180°C for 18h. The resulting inorganic/organic hybrid was filtered, washed, dried, and named as inorganic/organic hybrid nanocomposite (HNC). Various compositions of HNC were prepared and characterized by Fourier transform infrared spectrometer (FT-IR), Ultra Violet-Visible Diffuse reflectance spectrometer (UV-Vis-DRS), X-ray diffractometer (XRD), and Field emission scanning electron microscope (FE-SEM). The FE-SEM images showed a sago-shaped embedded particle in gC3N4 layers with a 40-60 nm particle size. The band gap energy was found to be 2.69 eV from UV-Vis-DRS analysis. This proves the promising activity of sago-shaped HNC under sunlight radiation. Various preliminary and kinetic studies were conducted, and HNC possessed excellent photocatalytic activity for the degradation of an organic dye under sunlight. The photocatalytic activity for the degradation of dye by the prepared HNC was found to be two-fold when compared to the activity of pristine gC3N4 under sunlight irradiation.

Binary-amplifying electrochemiluminescence sensor for sensitive assay of catechol and luteolin based on HKUST-1 derived CuO nanoneedles as a novel luminophore

Herein, a highly novel and effective electrochemiluminescence (ECL) sensor based on metal-organic framework (MOF, HKUST-1) derived CuO nanoneedles (HKUST-1 derived CuO NNs), gold nanoparticles (AuNPs) and TiO2 was developed for ultrasensitive detection of catechol and luteolin. The HKUST-1 derived CuO NNs were employed as luminophore for the first time, which were successfully fabricated by using HKUST-1 as precursor. The results revealed that the HKUST-1 derived CuO NNs exhibit excellent ECL activity ascribed to its abundant active site and the high specific surface area, thus obviously promoting the separation and transfer of charge and further improving the current density of ECL sensor. To binary-amplify the signal of the ECL sensor, the AuNPs and TiO2 nano-materials with good biocompatibility, great electron transport efficiency and high catalytic activity were used as co-reaction accelerators in the ECL process. Dependent on the above brilliant strategy, the proposed ECL sensor achieved wide linear ranges from 3 × 10−9 – 1 × 10−4 M for catechol and 1 × 10−8 – 2 × 10−4 M for luteolin, with the detection limits of 1.5 × 10−9 M for catechol and 5.3 × 10−9 M for luteolin, respectively. Furthermore, the ECL sensor exhibited outstanding selectivity, repeatability, stability and obtained great feedback on determination of catechol and luteolin in actual samples. The method not only filled a gap in the ECL application of MOF-derived materials but also provided a novel sight for design other highly efficient luminescent materials.

Exceptional stability of spinel Ni–MgAl2O4 catalyst with ordered mesoporous structure for dry reforming of methane

The dry reforming of methane reaction holds significant importance for the comprehensive utilization of CO2 and CH4, contributing to carbon neutrality. However, due to the high reaction temperatures, catalyst deactivation due to carbon deposition and sintering remains a challenge. In this study, a one-pot method was employed to improve the solvent evaporation self-assembly process for the preparation of Ni–MgAl2O4 catalysts. The impact of calcination temperature (600 °C, 800 °C, and 1000 °C) on the ordered mesoporous structure of the catalyst was investigated. Catalysts without an ordered mesoporous structure, such as Ni–MgAl2O4-1000, suffered deactivation due to carbon deposition caused by the large size of Ni grains, while Ni–MgAl2O4-600 deactivated due to sintering caused by the lack of confinement effect of the support on Ni. Conversely, Ni–MgAl2O4 catalysts with an ordered mesoporous structure exhibited confinement effects on Ni metal, resulting in excellent resistance to carbon deposition and sintering. Further investigation into the effect of different loading methods of Ni on methane dry reforming was conducted. A comparison was made between Ni–MgAl2O4 (800 °C) prepared by the one-pot method and Ni/MgAl2O4 (800 °C) prepared by the impregnation method. It was observed that Ni–MgAl2O4 catalysts, with Ni incorporated into the support, exhibited strong interaction between Ni and the support. During a 500-h long-term reaction, both CO2 and CH4 conversion rates remained at 90% for Ni–MgAl2O4 catalysts, with less carbon deposition and slower grain growth rate, demonstrating excellent reaction activity and stability. In contrast, the performance of Ni/MgAl2O4 catalysts gradually declined after 260 h. Ni–MgAl2O4 catalysts with ordered mesopores and strong interaction between Ni and the support displayed superior resistance to carbon deposition and sintering.

Five new eremophilane-type sesquiterpenes from the fresh roots of Rehmannia glutinosa

Five undescribed eremophilane-type sesquiterpenes, remophilanetriols E-I (1–5), along with seven known compounds (6–12) were isolated from the fresh roots of Rehmannia glutinosa. Their structures were characterized by extensive spectroscopic data analysis and their absolute configurations were determined by comparing their calculated electronic circular dichroism (ECD) spectra and experimental ECD spectra. The anti-pulmonary fibrosis activities of all compounds were evaluated in vitro by MTT methods, and compounds 2, 8, 10, and 12 exhibited excellent anti-pulmonary fibrosis activities. In addition, compound 2 can reduce the levels of ROS and apoptosis in TGF-β1-induced BEAS-2B cells.

Reconstruction of Fe sacrifice protective layer enables highly effective CoP catalyst for hydrogen evolution reaction at high current density

Under the background of “Green hydrogen,” the method of hydrogen production through coupling water electrolysis with renewable energy has raised heightened demands for fundamental hydrogen evolution catalysts. Recently, CoP-based catalysts have attracted much attention due to their excellent HER activity. However, the self-reconfiguration behavior of CoP in actual operation seriously affects its long-term hydrogen evolution stability. Herein, an in-situ reconstructed Fe sacrificial protective layer is proposed to inhibit the complete conversion of CoP in alkaline HER process and improve the stability of CoP-based catalysts. Through this sacrificial strategy, nearly 80 % of CoP is retained, forming a new Co(OH)2/COP as the active interface of HER. As result, the catalyst can maintain hydrogen evolution at high current density for more than 10 days, and show excellent dynamic response in start-stop experiment. In an Anionic Exchange Membrane electrode cell, a fully hydrolyzed water AEM cell needs only 1.9 V to drive 1 A cm−2 current density.

Investigating the Electrocatalytic Oxygen Evolution Reaction of Hydrothermally Synthesized NiFe2O4 Nanoparticles

In this study, nickel ferrite (NiFe2O4) nanoparticles were synthesized using the hydrothermal method at various pH values. The objective was to investigate the influence of pH variation on particle size and electrocatalytic activity. The formation of cubic phase nanoparticles was confirmed through X-ray diffraction (XRD) analysis. To characterize the electrochemical properties, the nickel ferrite nanoparticles were coated onto a stainless steel substrate using the doctor blade technique. The microstructural analysis was conducted using scanning electron microscopy (SEM). The samples were further analyzed using linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). The average crystallite size, determined from the XRD pattern, was approximately 40 nm. SEM images revealed a conversion from nanoplates to a granular morphology. The synthesized electrode exhibited an overpotential of 392 mV at 10 mA/cm2 and demonstrated good stability for 5 hours. These findings highlight the excellent electrocatalytic activity of nickel ferrite nanoparticles for the oxygen evolution reaction (OER).

1,2,4-Triazole-conjugated Fluoroquinolones as Potential Candidates for New Antibacterial Agents

Abstract: In this study, synthesis of 1,2,4 triazo1e-fluoroquino1one hybrid compounds was rea1ized. 7a-d hybrid compound was obtained as a result of mannich reaction with 6a-b triazole compounds norfloxacin and ciprofloxacin. 1H-NMR, 13C-NMR, Mass Spectrometry and Elemental Analysis confirmed the structures of a11 synthesized compounds. The antimicrobia1 activities of a11 compounds were investigated, and it was observed that 7a-d compounds, which are mannich bases, showed excellent activity.

Synthesis, characterization and antimicrobial evaluation of quaternary ammonium compounds from natural oils

Quaternary ammonium salts refer to any class of salt derived from ammonium in which the nitrogen atom is attached to four organic groups covalently, as in benzalkonium chloride (R4N+). Quaternary ammonium compounds were synthesized from Canola oil (Brasssicanapus) and Coconut oil (Cocos nucifera) extracts by reacting the oils with N,N-diethylethylenediamine in the presence of potassium tertiary butoxide as catalyst. Fourier Transform Infrared (FTIR) Spectrometric analyses of the starting materials, the intermediates and the final products were conducted, the results showed a disappearance of the carbonyl (C=O) stretch of an ester (the oil) at 1744cm-1 and appearance of N-H band of an amide at 3433cm-1, which resulted from the quaternization of benzyl chloride with the intermediates for both oils. Other functional groups such as C=C and C-H stretch of aromatic compound, C=O stretch of an amide were also observed.Mass spectrometric analysis of the final products were conducted and results showed the Molecular Ion peak (M+) which is the molecular weights of the products. Vital fragments such as base peaks were observed for both quats, other fragmented radical cations were observed.Antimicrobial activity of the synthesized Quaternary ammonium compounds (QACs) exhibited excellent anti-bacterial activity covering a diameter of 22 mm and 28 mm of E. coli for QACs from Cocos nucifera and Brassic anapus oils respectively as compared to the standard antibiotic (Ampillicin).

Increased Antibacterial Activity of Zinc-Silver Doped Hydroxyapatite Synthesized via Ultrasonic in Combination with Sol-Gel Technique using Glutinous Rice as a Template

T his work aims to synthesize Zn-Ag doped hydroxyapatite using glutinous rice (Zn-Ag doped GRHA) as a template through ultrasonic irradiation coupled with sol-gel technique. The prepared materials are referred to as Ca9.0Zn1.0-xAgx(PO4)6(OH)2 which consist of Zn2+ and Ag+ varying molar ratios (x= 0.0, 0.25, 0.50, 0.75 and 1.0). The synthesized samples were characterized by various techniques. XRD results revealed that Zn2+ and Ag+ were incorporated into a hexagonal framework of HA. FT-IR analysis showed that the main functional groups were hydroxyl and phosphate groups. SEM images showed a rough surface morphology, which consists of very small spherical particles. TEM images revealed the homogeneous distribution of Zn2+ and Ag+ in the synthesized samples. Antibacterial activity of the Zn-Ag doped GRHA against five strains of bacteria including S. aureus, B. cereus, B. subtilis, P. aeruginosa and E. coli was investigated. Zn0.75Ag0.25 doped GRHA showed excellent antibacterial activity against all strains except P. aeruginosa.

A novel Cu-containing TiZrNb-based medium entropy alloy with excellent mechanical properties, antibacterial activity and biocompatibility

Bacterial infection and stress shielding remain significant challenges in the field of orthopedic implant applications. Therefore, it is imperative to develop novel medical implant materials that possess exceptional mechanical properties, antibacterial efficacy, and biocompatibility. The current study reports a novel Ti1.2Zr1.2Nb0.6Cu0.15 medium entropy alloy (MEA) with an optimal combination of mechanical properties, antibacterial activity and biocompatibility. In the Ti1.2Zr1.2Nb0.6Cu0.15 MEA, bits of copper-enriched phases were uniformly dispersed within the body-centered cubic matrix phase. The MEA exhibited good strength-ductility combination with the yield strength of 906 MPa and the fracture elongation of 17.4%. It is noteworthy that the MEA had a significantly lower elastic modulus (∼67GPa) compared to pure titanium and Ti6Al4V (∼110GPa) thus mitigating stress shielding. Meanwhile, the Cu ions released by the alloy resulted in remarkable antibacterial efficacy with an antibacterial rate of 99% against Escherichia coli. Furthermore, this alloy displayed corrosion resistance and biocompatibility comparable to those of the Ti6Al4V alloy. These findings provide novel insights for designing antibacterial implant materials with excellent comprehensive performance.

Whole Genome Analysis and Assessment of the Metabolic Potential of Streptomyces carpaticus SCPM-O-B-9993, a Promising Phytostimulant and Antiviral Agent

This work aimed to study the genome organization and the metabolic potential of Streptomyces carpaticus strain SCPM-O-B-9993, a promising plant-protecting and plant-stimulating strain isolated from brown semi-desert soils with very high salinity. The strain genome contains a linear chromosome 5,968,715 bp long and has no plasmids. The genome contains 5331 coding sequences among which 2139 (40.1%) are functionally annotated. Biosynthetic gene clusters (BGCs) of secondary metabolites exhibiting antimicrobial properties (ohmyungsamycin, pellasoren, naringenin, and ansamycin) were identified in the genome. The most efficient period of SCPM-O-B-9993 strain cultivation was 72 h: during this period, the culture went from the exponential to the stationary growth phase as well as exhibited excellent phytostimulatory properties and antiviral activity against the cucumber mosaic virus in tomatoes under laboratory conditions. The Streptomyces carpaticus SCPM-OB-9993 strain is a biotechnologically promising producer of secondary metabolites exhibiting antiviral and phytostimulatory properties.

Tree Species-Dependent Inactivation of Coronaviruses and Enteroviruses on Solid Wood Surfaces.

The ongoing challenge of viral transmission, exemplified by the Covid pandemic and recurrent viral outbreaks, necessitates the exploration of sustainable antiviral solutions. This study investigates the underexplored antiviral potential of wooden surfaces. We evaluated the antiviral efficacy of various wood types, including coniferous and deciduous trees, against enveloped coronaviruses and nonenveloped enteroviruses like coxsackie virus A9. Our findings revealed excellent antiviral activity manifesting already within 10 to 15 min in Scots pine and Norway spruce, particularly against enveloped viruses. In contrast, other hardwoods displayed varied efficacy, with oak showing effectiveness against the enterovirus. This antiviral activity was consistently observed across a spectrum of humidity levels (20 to 90 RH%), while the antiviral efficacy manifested itself more rapidly at 37 °C vs 21 °C. Key to our findings is the chemical composition of these woods. Resin acids and terpenes were prevalent in pine and spruce, correlating with their antiviral performance, while oak's high phenolic content mirrored its efficacy against enterovirus. The pine surface absorbed a higher fraction of the coronavirus in contrast to oak, whereas enteroviruses were not absorbed on those surfaces. Thermal treatment of wood or mixing wood with plastic, such as in wood-plastic composites, strongly compromised the antiviral functionality of wood materials. This study highlights the role of bioactive chemicals in the antiviral action of wood and opens new avenues for employing wood surfaces as a natural and sustainable barrier against viral transmissions.

Preparation, Characterization, In silico and In vitro Antimicrobial Studies of Phenothiazine-3-sulphonamide Derivatives

The antibacterial activities of phenothiazine and sulphonamide derivatives have attracted so much interest. In this study, the synthesis and characterization of phenothiazine-3-sulphonamide derivatives and evaluation of their antimicrobial activity against the following pathogenic microorganisms is reported. Two Gram-positive bacteria; (Staphylococcus aureus (ATCC: 6538) and Streptococcus pyogenes (ATCC: 27853)), two Gram-negative bacteria; (Escherichia coli(ATCC: 3008), and Salmonella typhi (ATCC: 25175)) as well as one fungus (Aspergillus fumigatus (ATCC: 10231)) were used while ciprofloxacin, gentamycin and ketoconazole served as standard drugs. The synthesis of the derivatives was achieved through a base catalyzed the reaction of 4-chloroaniline with 1-naphthylamine to form 1-(naphthalen-1-yl)benzene-1,4-diamine. This intermediate was then treated with sulphur and iodine to yield the phenothiazine derivative while subsequent treatment of the phenothiazine compound with sulphonyl chlorides gave the final products. The synthesized compounds were characterized via proton nuclear magnetic resonance (1H-NMR), carbon-13 nuclear magnetic resonance (13C-NMR) and Fourier-transform infrared (FTIR) spectroscopic techniques. The minimum inhibitory concentration (MIC) of each compound was then determined using the agar well diffusion method. To predict the binding energies and patterns of the synthesized compounds with target proteins of the above-mentioned microorganisms, molecular docking simulations were run using Autodock Vina software (version 4.2). The spectra data of the compounds for FTIR, 1H-NMR and 13C-NMR spectral data were consistent with the assigned structures of the synthesized compounds. The binding energies (kcal/mol) for in silico antimicrobial studies were in the range -5.1 to -7.6 kcal/mol. The MIC values were in the range 3.5 to 1.0 mg/L. The results of the in vitro test revealed that the synthesized compounds exhibit promising antimicrobial activity and showed excellent bactericidal and fungicidal activities. The results obtained showed that the synthesized compounds possess drug-like properties and are good starting materials for drug production.

Development of iodine based sustained release antimicrobial coatings for polyurethane voice prostheses.

Voice prostheses are known to fail in few weeks to several months of implantation due to the clogging mainly caused by microbial biofilm formation, which is a cause of concern. Iodine is a known broad-spectrum biocide and is reported to easily form complexes with various polymers. For long term device disinfection, strong iodine complexation that offers sustained iodine release for a prolonged period is essential. The present research work deals with the synthesis of a poly(methyl methacrylate-n-butyl acrylate-N-vinyl-2-pyrrolidone) (poly[MMA-BA-NVP]) tercopolymer through free radical polymerization for surface coating thermoplastic polyurethane (TPU) based voice prostheses. The NVP content in the tercopolymer was varied from 20% to 50% to optimise iodine loading and subsequent release. Base TPU coated with the tercopolymer was treated with 4% aqueous iodine solution at room temperature (28 ± 3 °C) for two hours. It was observed that the tercopolymer containing 35% N-vinyl-2-pyrrolidone (NVP), 32.5% methyl methacrylate (MMA) and 32.5% butyl acrylate (nBA) gave a stable coating on TPUs together with sustained iodine release for a prolonged period. Furthermore, the tercopolymer coated and iodine loaded TPUs exhibited excellent antimicrobial activity against Candida albicans, Staphylococcus aureus and Escherichia coli.

Atomic Engineering of 3D Self‐Supported Bifunctional Oxygen Electrodes for Rechargeable Zinc‐Air Batteries and Fuel Cell Applications

AbstractThe oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are cornerstone half reactions involved in many renewable energy technologies. High‐density single‐atom catalysts maximize the atom utilization and isolated active sites. Furthermore, introduction of pyri‐N into the carbon‐based nanostructures as an oxygen electrocatalyst creates an abundance of active sites. Here, an innovative strategy is reported based on atomic scale dispersion of Co atoms into the pyri‐N enriched carbon nanotube encapsulated Ni nanoparticles grown on 3D electrospun carbon nanofiber nano‐assemblies. Notably, the CoSANi‐NCNT/CNF electrocatalyst exhibited excellent OER and ORR activity in terms of low overpotentials and higher half‐wave potentials. The atomically distributed Co allows the maximum exposure of active sites on the pyri‐N dominated multidimensional carbon skeleton, and synergistic effects with Ni nanoparticles greatly reduced the delocalization around the metal centers and provided an ideal environment for interactions with oxygen intermediates, thus facilitating the 4e− pathway, as evidenced by the DFT calculations. Moreover, Zn‐air batteries using a CoSANi‐NCNT/CNF air cathode exhibited a high‐power density and admirable specific capacity. This studies may provide an avenue for the rational modulation of single‐atom catalysts and cost‐effective, large‐scale synthesis of bifunctional oxygen electrocatalysts for rechargeable Zn‐air batteries and anion exchange membrane fuel cell.

Ultrasonication-assisted synthesis of transition metal carbide of MXene: an efficient and promising material for photocatalytic organic dyes degradation of rhodamine B and methylene blue in wastewater.

Water pollutants of non-biodegradable toxic aromatic dye including Methylene blue (MB) and Rhodamine (RhB) are extremely carcinogenic thiazines used in various industries such asleather industry, paper industry, and the dyeing industry. The presence of dyes in wastewater causes severe threats to human health that are responsible for various harmful chronic or acute diseases and also shows an adverse impact on the environment as it reduces transparency and is harmful to water microorganisms. To overcome severe issues, many traditional techniques have been used to remove toxic pollutants, but thesemethods are insufficient to remove chemically stable dyes that remain in the treated wastewater. However, the photocatalytic degradation process is an efficient approach to degrade the dye up to the maximum extent with improved efficiency. Therefore, in this work, a new class of two-dimensional (2D) transition metal carbide of Titanium Carbide (Ti3C2Tx) MXene material was used for the organic dyes degradation such as MB and RhB using a photocatalytic process. A layered structure of hexagonal lattice symmetry of Ti3C2Tx MXene was successfully synthesized from the Titanium Aluminum Carbide ofTi3AlC2 bulk phase using an exfoliation process. Further, the XRD spectrum confirms the transformation of bulk MAX phase having (002) plane at 9.2° to Ti3C2Tx MXene of (002) plane at 8.88° confirms the successful removal of Al layer from MAX phase. A smooth, transparent, thin sheet-like morphology of Ti3C2Txnanosheet sizewere found to be in the range of 70 to 150nm evaluated fromTEM images. Also,no holes or damages in the thin sheets were foundafter the treatment with strong hydrofluoric acid confirms the formationTi3C2Tx layered sheets. The synthesized Ti3C2Tx MXene possesses excellent photocatalytic activity for the degradation of dyes MB, RhB, and mixtures of MB and RhB dyes. MB dye degraded with a degradation percentage efficiency of 99.32% in 30min, while RhB dye was degraded upto98.9% in 30min. Also, experiments were conducted for degradation ofmixture of MB and RhB dyes by UV light, and the degradationpercentage efficiency were found to be 98.9% and 99.75% for mixture of MB and RhB dyein 45min, respectively. Moreover, reaction rate constant (k) was determined for each dye of MB, RhB, and mixtures of MB and RhB and was found to be 0.0215min-1 and 0.0058min-1, and for mixtures, it was 0.0020min-1 and 0.009min-1, respectively.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions.

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.

Polyethylene glycol/melamine foam composite phase change materials modified by CdS/Ag exhibits high photothermal conversion performance

CdS has been shown to be an excellent photon trap with strong absorption of light at visible and near-infrared wavelengths. The use of CdS for phase change material (PCM) modification can significantly improve its photothermal conversion performance. However, due to the unique energy band structure of CdS, the difficulty in electron conduction leads to poor thermal conductivity. This problem can be improved by introducing high thermal conductivity nanometals for modification, however, the effective combination of CdS and nanometals has been challenging. In this study, a new preparation strategy is demonstrated, in which Ag nanoparticles (NPs) with similar lattice parameters and crystalline coordination to CdS is first introduced on the surface of carbonized melamine foam (CMF), followed by the introduction of CdS NPs. This similar structure helps to form a better interfacial bond between CdS and Ag. The resulting stabilized structure enables the composite phase change material (CPCM) to achieve 96.1 % PEG loading with an ultra-high photothermal conversion efficiency of 94.6 %, thermal conductivity of 0.61 W/m∙K, and excellent antimicrobial activity. This study provides valuable guidance for the engineering design of CPCM with high photothermal conversion performance and suggests its practical application value in seawater evaporation and thermal management of medical devices.

Green synthesis and characterization of silver anchored ZnO nanoparticle as the antimicrobial reinforcement for polylactide films

AbstractThe aqueous extract of endophytic fungi (Periconia sp.) was effectively used as a reducing agent to anchor Ag nanoparticles on the ZnO surface. The XRD, UV‐Vis, SEM‐EDX and TEM analyses were performed to ensure the formation of AgNP@ZnO architecture. TEM analysis confirmed that the 4–20 nm sized Ag nanoparticles were anchored evenly on the surface of ZnO with 16–78 nm in size. The antimicrobial study showed the superior performance of AgNP@ZnO functional nanoparticles than the pristine ZnO against pathogenic bacteria Staphylococcus aureus (gram‐positive) and Escherichia coli (gram‐negative). Hence, AgNP@ZnO functional particles were effectively explored as antimicrobial reinforcement for fabricating composite films using polylactic acid (PLA) as a matrix. The obtained nanocomposite films showed excellent antibacterial activity, which increases with increasing AgNP@ZnO loading.

FeCo‐oxalate Organic Framework as an Efficient Electrocatalyst for Oxygen Evolution Reaction

Developing nonprecious metallic electrocatalysts for water splitting is of vital importance for sustainable environment and energy technologies. As for oxygen evolution reaction (OER), FeCo‐based bimetallic catalysts have been found to act as promising candidates owing to their high intrinsic activity. Herein, a novel FeCo‐oxalate organic framework was grown on nickel foam (FeCo‐OA@NF) under mild conditions. The optimized electrocatalyst shows good OER performance with a low overpotential of 275 mV at the current density of 100 mA cm−2 in alkaline environment, comparable to that of commercial Ru‐based catalyst. Moreover, the quantification of produced oxygen by both gas chromatography and drainage method demonstrates nearly 100% Faradaic efficiency. Except for the contribution of Fe and Co species for the excellent OER catalytic activity, in‐situ Raman spectroscopy reveals that the positive effect of oxalate coordination also makes a difference, which can possibly reduce electron transport resistance and provide more active sites. This work provides a promising approach for the preparation of alkaline oxygen evolution electrocatalysts with low‐cost and high performance.