Evanescent Field Research Articles

Decoupled Dipole Arrays Empowered by Invisible Complex Poles in Epsilon‐Near‐Zero Metamaterials

AbstractEvanescent waves, characterized by an exponential decay in propagation, have witnessed significant advancements in far‐field imaging and near‐field sensing applications. However, incoming evanescent waves can excite guided resonance inside a dielectric slab, resulting in a rapid growth of transmission coefficient toward infinity at the pole points. Such evanescent‐wave excited resonance benefits super‐resolution applications yet causes severe crosstalk in highly integrated multi‐channel devices. Here, the invisible complex poles are discovered in the transmission spectra of epsilon‐near‐zero (ENZ) metamaterials and demonstrate the striking suppression of near‐field crosstalk enabled by the anomalous transmission beyond the critical angle. Equipped with an ENZ metamaterial spacer, collinear dipole arrays exhibit 9.2 dB improvement in near‐field isolation among interior dipoles at a distance of less than one wavelength. Experimental measurements show negligible influence on the intrinsic impedance matching and radiation patterns of the dipole antennas. The discovered field divergence effect from the disappearance of real‐valued pole singularity in ENZ metamaterials offers an alternative solution for highly compact arrays in full duplex communication and multiple‐input multiple‐output technology.

Detection of picometer scale vibration based on the microsphere near-field probe

We introduce an innovative vibration detection method utilizing a microsphere near-field probe, affixed to an optical fiber probe. Notably, when the microsphere probe is positioned at a distance of approximately 100 nm from the vibrating objects, it exhibits a substantial increase in detection sensitivity, enabling the detection vibration as small as 5 pm. This enhancement arises from the strong near-field interaction between the sample and probe, where the evanescent wave dominates. This effect is confirmed for the first-time through both theoretical analysis and experimental validation. This innovative probe has great potential for applications in cellular acoustics, vibrational detection of biomolecules and their complexes, in situ measurements, and imaging of microstructures and nanostructures.

Refractive index sensing characteristics of PCF-SPR based on dual-plasmon materials

Abstract In this paper, a photonic crystal fiber (PCF) refractive index sensor based on surface plasmon resonance (SPR) with dual plasmonic materials (indium tin oxide and gold) is proposed. We innovatively designed a dual-core PCF structure and pore arrangement effectively enhancing the coupling effect. Using two different plasma materials, phase matching is achieved at two different wavelengths for the evanescent and surface plasmon waves, resulting in dual resonance peaks. The refractive index sensing is accomplished by measuring the dual-peak resonance shift, which expands the detection wavelength and RI detection ranges. The sensor can detect analytes with refractive indices ranging from 1.32 to 1.43 at wavelengths between 0.4 um and 1.4 um. We optimized the photonic crystal fiber structure and studied the sensing performance of the sensor, improving its sensitivity. Simulation results indicate that the designed PCF sensor exhibits outstanding maximum dual-peak shift sensitivity (DPSS), reaching up to 28,000 RIU-1, along with maximum amplitude sensitivity (AS) and wavelength sensitivity (WS) of 18,500 RIU-1 and 34,500 RIU-1, respectively, in the direction of y-polarization. Furthermore, the sensor achieves high resolution, and the figure of merit (FOM) values can reach up to 5.134×10-7 and 2758. Consequently, the proposed sensor can provide high-precision and extensive-range measurements of solution refractive indices within the visible and infrared light spectrum, and it holds potential application prospects in numerous fields, such as food safety testing and chemical substance detection.

Toggling near-field directionality via manipulation of matter's anisotropy.

Near-field directional excitation of dipolar sources is crucial for many practical applications, such as quantum optics, photonic integrated circuits, and on-chip information processing. Based on theoretical analyses and numerical simulations, here we find that the near-field directionality of circularly polarized dipoles can be flexibly toggled by engineering the anisotropy of the surrounding matter, in which the dipolar source locates. To be specific, if the circularly polarized dipole is placed close to the interface between a hyperbolic matter and air, the main propagation direction of excited surface waves would be reversed when the location of the dipolar source is changed from the air region to the hyperbolic-matter region. The underlying mechanism is that the spatial-frequency spectrum of evanescent waves carried by the dipolar source in a homogeneous surrounding matter could be flexibly reshaped by the matter's anisotropy, especially when the isofrequency contour of the surrounding matter changes from the circular shape to the hyperbolic one.

Principles and Applications of ZnO Nanomaterials in Optical Biosensors and ZnO Nanomaterial-Enhanced Biodetection.

Significant research accomplishments have been made so far for the development and application of ZnO nanomaterials in enhanced optical biodetection. The unparalleled optical properties of ZnO nanomaterials and their reduced dimensionality have been successfully exploited to push the limits of conventional optical biosensors and optical biodetection platforms for a wide range of bioanalytes. ZnO nanomaterial-enabled advancements in optical biosensors have been demonstrated to improve key sensor performance characteristics such as the limit of detection and dynamic range. In addition, all nanomaterial forms of ZnO, ranging from 0-dimensional (0D) and 1D to 2D nanostructures, have been proven to be useful, ensuring their versatile fabrication into functional biosensors. The employment of ZnO as an essential biosensing element has been assessed not only for ensembles but also for individual nanomaterials, which is advantageous for the realization of high miniaturization and minimal invasiveness in biosensors and biodevices. Moreover, the nanomaterials' incorporations into biosensors have been shown to be useful and functional for a variety of optical detection modes, such as absorption, colorimetry, fluorescence, near-band-edge emission, deep-level emission, chemiluminescence, surface evanescent wave, whispering gallery mode, lossy-mode resonance, surface plasmon resonance, and surface-enhanced Raman scattering. The detection capabilities of these ZnO nanomaterial-based optical biosensors demonstrated so far are highly encouraging and, in some cases, permit quantitative analyses of ultra-trace level bioanalytes that cannot be measured by other means. Hence, steady research endeavors are expected in this burgeoning field, whose scientific and technological impacts will grow immensely in the future. This review provides a timely and much needed review of the research efforts made in the field of ZnO nanomaterial-based optical biosensors in a comprehensive and systematic manner. The topical discussions in this review are organized by the different modes of optical detection listed above and further grouped by the dimensionality of the ZnO nanostructures used in biosensors. Following an overview of a given optical detection mode, the unique properties of ZnO nanomaterials critical to enhanced biodetection are presented in detail. Subsequently, specific biosensing applications of ZnO nanomaterials are discussed for ~40 different bioanalytes, and the important roles that the ZnO nanomaterials play in bioanalyte detection are also identified.

Measurement of turbid media by total internal reflection with Goos-Hänchen angle displacement

Based on the Goos-Hänchen effect and the intensity attenuation of the evanescent wave penetrating and traveling, a new theoretical model of total internal reflection from the interface of turbid media is proposed and an analytical reflectance expression in a wide incident angle range is developed. The Goos-Hänchen angle displacement between the critical reflectance and the saturated reflectance is discovered. A sensor, for measuring the complex refractive index of turbid media in real-time, with divergent light source is designed. The captured images show that the light distribution reflected from the transparent medium has a sharp boundary, but for turbid media, the reflected light intensity attenuates during the transition from total to non-total internal reflection regions. It is successful and accurate that the new model fits the experimental data of the reflectance and the complex refractive index of turbid media is measured by our sensor. The results show that measuring has advantages in real-time, in situ, and with high accuracy.

Eliminating blowing-ups and evanescent waves when using the finite series technique in evaluating beam shape coefficients for some T-matrix approaches, with the example of Gaussian beams

When evaluating beam shape coefficients which encode the description of laser beams, for use in some T-matrix approaches such as generalized Lorenz-Mie theory or Extended Boundary Condition Method for structured beams, by using finite series, blowing-ups are observed. When numerical inaccuracies are ruled out, it has been firmly demonstrated that such blowing-ups correspond to genuine physical phenomena, namely they describe evanescent waves. We propose a method to eliminate these blowing-ups and the corresponding evanescent waves (at least most of them).

Linear pressure waves in mono- and poly-disperse bubbly liquids: Attenuation and propagation speed in slow and fast and evanescent modes

Using volumetric averaged equations from a two-fluid model, this study theoretically investigates linear pressure wave propagation in a quiescent liquid with many spherical gas bubbles. The speed and attenuation of sound are evaluated using the derived linear dispersion. Mono- and poly-disperse bubbly liquids are treated. To precisely describe the attenuation effect, some forms of bubble dynamics equations and temperature gradient models are employed. Focusing on the dissipative effect, we analyze the stop band that occurs in the linear dispersion relation. In the two-fluid model, even if the dissipation effect is considered, the inconvenience that the wavenumber diverges to infinity in the resonance frequency cannot be resolved. Additionally, the validity of terminating that wavenumber value in the middle of the frequency is demonstrated. To determine a linear dispersion relation that can exactly predict thermal conduction and acoustic radiation, wave propagation velocities and attenuation coefficients are compared with some experimental data and existing models. The results show that thermal conduction and acoustic radiation should be set appropriately to accurately predict the propagation velocity and attenuation except in the high frequency range, the phase velocity in the resonance frequency range, or the attenuation in the high frequency range.

Attenuation of Lamb waves in coupled-resonator viscoelastic waveguide

Guidance of elastic waves is one of the main applications of artificial crystal structures. The attenuation of the guided waves is, however, often overlooked, as most of the proposed waveguides only comprise ideal elastic materials. In this work, we study the propagation of evanescent Lamb waves guided in coupled-resonator viscoelastic waveguide (CRVW), with special attention to attenuation. CRVW is defined by considering a linear chain of coupled defect cavities in a phononic plate made of epoxy. The viscoelastic behavior of epoxy is characterized numerically by the Kelvin–Voigt (K–V) model. Based on finite element analysis, the complex band structure and the spectrum of frequency response function (FRF) are obtained. Due to viscosity, guided Lamb waves are spatially damped. Two theoretical models are devised to predict the displacement distributions inside and outside a bandgap for guided waves, respectively, considering either the first or the first two least evanescent Bloch waves identified in the complex band structure. A CRVW sample is fabricated and characterized experimentally by laser vibrometry. Evanescent Lamb waves are observed to be strongly confined along the waveguide and at the same time to decay rapidly along the waveguide axis. Experiments and numerical simulations are found to be in fair agreement. The present work is expected to inspire practical applications of highly confined viscoelastic phononic waveguides.

Sensitivity and accuracy of single-mode fiber optic sensor for non-invasive glucose measurement

Abstract Routine glucose level monitoring is essential for diabetic patients. Standard measurement methods based on finger pricking are inconvenient and susceptible to infection risk. Therefore, simple and non-invasive measurements are urgently needed. Compared to other approaches, glucose level measurement using optical methods offers many advantages, such as set-up simplicity, high sensitivity, and high accuracy. We optimize the sensing performance of glucose level sensors based on a single-mode fiber optic. The fiber optic serves as a medium for light propagation from a diode laser to a photodiode and, at the same time, serves as an active sensing medium. In the sensing area, the fiber optic cladding is partly (i.e., 1 – 5 cm) stripped to allow direct contact, which leads to evanescent wave absorption by glucose molecules. The length of fiber optic stripping and bending radius, which determine the sensitivity and accuracy of the sensor, varied. Bent fiber optic sensors consistently show a higher sensitivity and accuracy than straight ones. Maximum sensitivity of 2.35 mV/(mg/dL) was attained for a 3 cm stripping length and 4.5 cm bending radius. The lowest sensitivity of the sensor, 0.453 mV/(mg/dL), was acquired at the stripping length of 5 cm for the straight fiber optic sensor. The highest accuracy of the developed sensor is 99% for bent fiber optic sensors.

High-sensitivity and wide-range refractive index sensing based on the envelope spectrum of the subwavelength grating waveguide racetrack microring resonator.

Integrated microring resonators (MRRs) on silicon on insulator (SOI) are attractive candidates for excellent performance sensing systems. In this work, a novel, to the best of our knowledge, subwavelength grating waveguide racetrack microring resonator (SWGW-RMRR) on SOI with high-sensitivity and wide-range refractive index (RI) sensing is proposed and demonstrated experimentally. Owing to the exceptional evanescence field of the Bloch mode for the SWGW, the SWGW-RMRR provides highly sensitive RI sensing. Meanwhile, the SWGW-RMRR makes the free of free spectral range (FSR) limitation on the detection range (DR) by monitoring the envelope spectrum. By combining the advantages of the evanescent field and envelope spectrum, a SWGW-RMRR sensor has been demonstrated with a RI sensitivity of 860.8 nm/RIU, a limit of the detection value of 1.9 × 10-5 RIU, and a wide range of detection range. The measured Q-factor of the SWGW-RMRRs with an 88.8 µm total cavity length is 6200. This work can successfully realize high-sensitivity and wide-range RI sensing, showing the promising applications of silicon photonics sensors on chips.

Zero-crosstalk silicon photonic refractive indexsensor with subwavelength gratings.

Silicon photonic index sensors have received significant attention for label-free bio and gas-sensing applications, offering cost-effective and scalable solutions. Here, we introduce an ultra-compact silicon photonic refractive index sensor that leverages zero-crosstalk singularity responses enabled by subwavelength gratings. The subwavelength gratings are precisely engineered to achieve an anisotropic perturbation-led zero-crosstalk, resulting in a single transmission dip singularity in the spectrum that is independent of device length. The sensor is optimized for the transverse magnetic mode operation, where the subwavelength gratings are arranged perpendicular to the propagation direction to support a leaky-like mode and maximize the evanescent field interaction with the analyte space. Experimental results demonstrate a high wavelength sensitivity of - 410nm/RIU and an intensity sensitivity of 395dB/RIU, with a compact device footprint of approximately 82.8μm2. Distinct from other resonant and interferometric sensors, our approach provides an FSR-free single-dip spectral response on a small device footprint, overcoming common challenges faced by traditional sensors, such as signal/phase ambiguity, sensitivity fading, limited detection range, and the necessity for large device footprints. This makes our sensor ideal for simplified intensity interrogation. The proposed sensor holds promise for a range of on-chip refractive index sensing applications, from gas to biochemical detection, representing a significant step towards efficient and miniaturized photonic sensing solutions.

(Invited) Development of Fiber-Optic Hydrogen Sensor Using Platinum-Supported Tungsten Trioxide-Silica Composite Film

A fiber-optic hydrogen gas sensor using a platinum-supported tungsten oxide-silica composite film was fabricated. This sensor utilizes the absorption of the evanescent field interaction in the hydrogen sensitive clad which was composed of WO3 and SiO2, coated on a silica core with sol-gel process. As a first step, transmission spectra of sensing film itself were measured. The transmittance of the sensitive film decreased in the range of wavelengths above about 500 nm after exposure to pure hydrogen, and the change in transmittance at 1300 nm was greater than that at 850 nm. Then, fiber optic sensor device was fabricated, and the amount of propagating light was measured. In the case of using the light source with a wavelength of 1300 nm, the sensitivity with respect to the hydrogen response was nearly twice and the response speed was faster, compared with those at 850 nm.

Evanescent and inertial-like waves in rigidly rotating odd viscous liquids

Evanescent and inertial-like waves in rigidly rotating odd viscous liquids

Dispersion-free characterization of terahertz slab–waveguide modal confinement based on a metal Bragg grating structure

Photonic waveguide structures that use periodic metal grooves and periodically perforated metal slits (PPMSs) can laterally confine Sommerfeld and Zenneck surface waves of metals with the electric field accumulation among metal interspaces in the terahertz (THz) region, instead of the total internal reflection principle of dielectric slab media. For the efficiency enhancements of THz-wave coupling and slab–waveguide confinement, specific integrators with high refractive indices or specified for input angles of transverse magnetic polarized waves, such as prisms, metal blades, and waveguides, are requested to excite spoof surface plasmons in the THz region. However, the integrator-assembled slab–waveguides encounter challenges of THz pulse-wave communication in compact and low-distortion systems. A resonant waveguide grating structure based on PPMSs is experimentally demonstrated to confine THz lateral waves from the plane-wave radiation in free space. The open frame and periodic metal cavities of PPMSs can work as a slab–waveguide to transmit structural confined waveguide modes with forwarding evanescent waves of Fabry–Pérot resonance. For 0.1–1 THz waves, the short wavelengths that are both less than half the metal slit width and 3.75 times the metal thickness can lead to zero dispersion and the highest confinement factor in a slab–waveguide for PPMS-confined THz waves. This behavior is opposite to the high structural dispersion in confined THz waves of surface plasmonic devices.

Waveguide-Enhanced Nanoplasmonic Biosensor for Ultrasensitive and Rapid DNA Detection.

DNA is fundamental for storing and transmitting genetic information. Analyzing DNA or RNA base sequences enables the identification of genetic disorders, monitoring gene expression, and detecting pathogens. Traditional detection techniques like polymerase chain reaction (PCR) and next-generation sequencing (NGS) have limitations, including complexity, high cost, and the need for advanced computational skills. Therefore, there is a significant demand for enzyme-free and amplification-free strategies for rapid, low-cost, and sensitive DNA detection. DNA biosensors, especially those utilizing plasmonic nanomaterials, offer a promising solution. This study introduces a novel DNA-functionalized waveguide-enhanced nanoplasmonic optofluidic biosensor using a nanogold-linked sorbent assay for enzyme-free and amplification-free DNA detection. Integrating plasmonic gold nanoparticles (AuNPs) with a glass planar waveguide (WG) and a microfluidic channel, fabricated through cost-effective, vacuum-free methods, the biosensor achieves specific detection of complementary target DNA sequences. Utilizing a sandwich architecture, AuNPs labeled with detection DNA probes enhance sensitivity by altering evanescent wave distribution and inducing plasmon resonance modes. The biosensor demonstrated exceptional performance in DNA detection, achieving a limit of detection (LOD) of 33.1 fg/mL (4.36 fM) with a rapid response time of approximately 8 min. This ultrasensitive, rapid, and cost-effective biosensor exhibits minimal background nonspecific adsorption, making it highly suitable for clinical applications and early disease diagnosis. The innovative design and fabrication processes offer significant advantages for mass production, presenting a viable tool for precise disease diagnostics and improved clinical outcomes.

Coupled terahertz quantum cascade wire lasers

We present mutual optical coupling in terahertz (THz) quantum cascade wire laser arrays that are flip-chip bonded to a dielectric substrate. The mounting substrate is patterned for individual electrical contacting of each wire laser of the array. The resulting sandwich-like structure supports wire laser modes with a significant part propagating outside the cavity and mediates the long range coupling. The evanescent field part of the modes couples to the adjoining ridge, which, in turn, leads to mutual optical injection-locking between them. We demonstrate this effect for both geometrically similar and dissimilar wire lasers when biased in pulsed operation with temporally overlapping bias pulses. Finite element simulations confirm our measurement results. By applying time-shifted bias pulses to individual array elements, a controllable optical injection seeding of the wire cavity is achieved. We observe intensity modification of the laser modes with changing bias pulse overlap as a result of the injection locking. By choosing both the physical spacing of the laser ridges and the intensity of the seeding laser correctly, the relative intensities of the favored lasing modes are enhanced up to 95 percent. Understanding the coupling in THz wire laser arrays is important for future device improvements in terms of higher continuous-wave operating temperatures through better thermal dissipation, and higher output power and an improved far field due to controlled coupling of their modes.

Evanescent Electron Wave-Spin.

This study demonstrates the existence of an evanescent electron wave outside both finite and infinite quantum wells by solving the Dirac equation and ensuring the continuity of the spinor wavefunction at the boundaries. We show that this evanescent wave shares the spin characteristics of the wave confined within the well, as indicated by analytical expressions for the current density across all regions. Our findings suggest that the electron cannot be confined to a mathematical singularity and that quantum information, or quantum entropy, can leak through any quantum confinement. These results emphasize that the electron wave, fully characterized by Lorentz-invariant charge and current densities, should be considered the true and sole entity of the electron.

Ultrasonic waveguide based super resolution imaging using structured channel metamaterial lenses

The extension of metamaterial concepts to the ultrasonic domain is challenging because of the shorter wavelength, which necessitates the use of spatially narrow band receiving techniques to capture wavefields past fine features of the metamaterial. Currently, the Laser Doppler Vibrometer is the only option with several drawbacks hampering its widespread practical implementation, including cost and sensitivity to external disturbances. This paper proposes a novel waveguide based reception technique to capture the amplified evanescent fields transmitted through the subwavelength features of the metamaterials. Numerical simulations and experiments are carried out on a structured channel metamaterial and a thin stainless steel waveguide attached to a commercial transducer. A practical super resolution ultrasonic imaging down to a third of the operating wavelength is successfully demonstrated in comparison with a commercial laser receiver. The physics of the imaging and dispersion characteristics of the waveguide enabling the process are discussed. The promising results showcase broadband, low-cost, portable alternatives with important implications for high-resolution ultrasonic imaging in industrial and biomedical applications.

Plasmonic coupling dependent sensitivity in localized surface plasmon resonance based optical sensors

This paper investigates the impact of environmental changes on silver nanoparticles (AgNp) immobilized sensor probe within strong and weak plasmonic coupling regimes. To monitor these interaction regimes, evanescent wave absorption based on fiber optic and attenuated total reflection techniques have been employed. In the weak coupling regime, variations in refractive index (RI) primarily affect intensity rather than wavelength. Conversely, in the strong coupling regime, intensity decreases, while wavelength sensitivity increases with changes in RI. Our findings qualitatively agree with a theoretical framework based on the discrete dipole approximation (DDA) for two-particle interacting systems, providing valuable insights for optimizing plasmonic interactions to enhance sensitivity. This information will aid the scientific and industrial community in understanding the plasmonic interaction region for maximizing sensitivity of Localized surface plasmon resonance (LSPR) based photonic devices.