Eutectic Research Articles

Purification and components identification of ‘Ziyan’ anthocyanins

The new tea cultivar ‘Ziyan’ has high anthocyanin content. To explore its potential, the anthocyanin components were separated and prepared using the purple leaves of ‘Ziyan’ as raw materials. A deep eutectic solvent system was prepared for efficient extraction, replacing traditional solvents and achieving higher anthocyanin yield. The extraction parameters were optimized using response surface test and the yield of ‘Ziyan’ anthocyanin reached 5.06 ± 0.04 mg/g (dry weight) at a temperature of 65 °C, solvent moisture content of 29 %, solid-liquid ratio of 1:25 mg/mL and time of 39 min. The DM301 resin was preferred to recover anthocyanins from deep eutectic solvents, resulting in anthocyanin powder with a purity of 6.02 % and a color value of 29.1. It means ‘Ziyan’ anthocyanin has the potential to be developed as a food colorant. The enriched anthocyanins were analyzed using High Performance Liquid Chromatography-Diode Array Detection-Electrospray Tandem-Mass Spectrometry (HPLC-DAD-ESI-MS/MS), identifying 16 anthocyanin derivatives, including 5 acylated components. Petunidin and malvidin were found for the first time in ‘Ziyan’ tea cultivar. This study provided an important basis for the development of ‘Ziyan’ anthocyanins as a natural food and nutraceutical pigment.

Performance evaluation and thermal stabilization of photovoltaic panels using phase-change materials

Photovoltaic (PV) is a widely used technology that generates power from solar energy. The solar radiations reaching PV panels are converted into electrical energy and heat, however the panel temperature increases, leading to a decrease in performance. This issue can be resolved using cooling methods. Phase-change materials (PCMs) are utilized in passive cooling methods, which do not consume energy, store the heat from the panel and cool them. In this study, sodium acetate trihydrate (PCM-1), palmitic acid (PCM-2), and a eutectic mixture of stearic acid and palmitic acid (PCM-3) were placed in a container and integrated into monocrystalline and polycrystalline PV panels to examine the impact of PCM on various performance metrics including power output, energy efficiency, and PV panel surface temperature. The experiments are carried out in Izmir, which has a hot climate condition in summer months. The solar irradiance of Izmir city and standard test condition of 1000 W/m2 were applied to the panels in the experiments. Results showed that the maximum temperature decreased, compared to the reference panel (without PCM), by 22.84 % and 14.4 %, respectively, when using PCM-1 and eutectic mixture in the monocrystal panel at 1000 W/m2 in August. The power and efficiency increased by 24.97 % and 24.95 %, respectively, for the polycrystalline panel in July. These results indicate that PCMs enhanced the cooling and increased the performance of the PV panels with high surface temperatures due to intense solar irradiation.

A Review Article on Transdermal Drug Delivery System

When compared to more conventional drug delivery methods, transdermal administration has many benefits. High bioavailability, the lack of first pass hepatic metabolism, stable medication plasma concentrations, and the non-invasive nature of therapy are a few of these. The stratum corneum, the skin's topmost layer, is the main barrier to medication molecules penetrating it. The study of how to get beyond this layer and improve transdermal drug delivery (TDD) is therefore of great interest. The purpose of this review article is to offer a remark on the most current developments in TDD enhancement methods. Techniques to increase skin penetration have been developed to boost bioavailability and broaden the range of medications for which topical and transdermal distribution is an effective alternative. These approaches include drug selection, prodrugs and ion pairs, supersaturated drug solutions, eutectic systems, complexation, liposomes, vesicles, and particles. These enhancement strategies are centered on optimizing the interaction between the drug and the vehicle. Enhancement through hydration-induced stratum corneum change, chemical enhancers that affect the stratum corneum's lipid and keratin composition, and effects on partitioning and solubility are also covered. It is discussed how penetration enhancers and retarders work and how they could be used in therapeutic settings.

Effect of thermal treatments on the surface electrical conductivity of AlSi7Mg produced by laser powder bed fusion

In the last years, the production of hypoeutectic Al-Si waveguide components by metal additive manufacturing has gained increasing attention in the telecommunications industry. The performances of waveguide components are influenced primarily by dimensional tolerances, surface electrical conductivity, surface roughness, and dimensional accuracy. Among these properties, electrical conductivity is known to be strongly influenced by the structural and microstructural characteristics of the alloys.In this work, microstructural and structural properties of an hypoeutectic Al-Si alloy, namely the AlSi7Mg alloy, were studied using FESEM, DSC, and XRD to understand how different thermal treatments (stress relieving, T5, and T6) affect the surface electrical conductivity. In the end, the most suitable thermal treatment to be applied to this alloy to maximize its electrical conductivity and, therefore, its appeal for microwave waveguide components is identified.

Advanced NADES-based extraction processes for the recovery of phenolic compounds from Hass avocado residues: A sustainable valorization strategy

Natural Deep Eutectic Solvents (NADES) are eco-friendly solvents with considerable potential for extracting bioactive compounds. In this study, we aimed to extract phenolic compounds from Hass avocado residues (epicarp and seed) using NADES in combination with ultrasound-assisted extraction (UAE) and pressurized liquid extraction (PLE) as advanced processes. Ten eutectic mixtures, consisting of choline chloride (ChCl) or betaine as hydrogen bond acceptors (HBA), as well as fructose (Fru), glucose, lactic acid (Lac), citric acid, or glycerol as hydrogen bond donors (HBD), were prepared through stirring and heating. The estimated values for total phenol content (TPC), proanthocyanidin content (PAC), monomeric anthocyanin content (MAC), and antioxidant capacity of the extracts demonstrated a noticeable influence of these solvents. The PLE process significantly enhanced the extraction of phenolic compounds from the epicarp, as evidenced by TPC (185 ± 9 mg gallic acid equivalent/g dry sample) and PAC (77.8 ± 6 mg proanthocyanidin B2/g dry sample) values. Phytochemical characterization conducted via HPLC-QTOF-MS/MS revealed the great extraction capacity of ChCl:Fru and ChCl:Lac, and the improvement of extraction efficiency through PLE. The results suggest that employing these innovative solvents along with advanced extraction processes, especially under high pressures, provides a sustainable approach to recover extracts with high content of phenolic compounds from Hass avocado agro-industrial waste, thus enabling their valorization.

"Dissolve-on-Demand" 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels.

Solvent-free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N-isopropylacrylamide (NIPAM), acrylamide (AAm) and 2-hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures is evaluated via in situ photo-DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)-based 3D printing resin. Due to the hydrogen-bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents.

Diving into Natural Solvents: A Comprehensive Analysis of Deep Eutectic Systems Based on Terpenes and Flavonoids

Diving into Natural Solvents: A Comprehensive Analysis of Deep Eutectic Systems Based on Terpenes and Flavonoids

High heat flux ablation behaviors of Ir-Hf coatings in wind tunnel tests up to 6.6 MW/m²

The Ir-Hf coatings have good resistance to oxidative ablation, in order to investigate the ablation resistance limit and ablation failure mechanism of the Ir-Hf coatings, graphite/Re/Ir/Ir-Hf samples were prepared by an optimized pack cementation method. The Ir-Hf coating samples were tested for anti-ablation properties under stepwise and constant working conditions in a high-frequency plasma wind tunnel, respectively. The results showed that the Ir-Hf coating passed the high-frequency plasma wind tunnel test at a heat flux of 5.7 MW/m2 for 650 s without defects. And the heat flux limit of the Ir-Hf coating was about 6.6 MW/m2 in the plasma wind tunnel with a lifetime no less than 400 s and a surface temperature of about 2200℃, exceeding most of the reported heat flux limits for non-ablative materials, such as SiC, ZrB2 and HfC. The failure mechanism of the Ir-Hf coating is as follows: when the surface temperature reaches a certain level, the interface temperature between Ir and the oxide layer will exceed its low eutectic point and a liquid phase will appear, triggering failure. The Ir-Hf coatings have the advantages of high heat flux resistance, zero ablation, low thermal response and good protection of the graphite substrate, which makes them promising as the thermal protection coatings in ultra-high temperature (over 2000 °C) aerospace applications.

Formulation of Ascorbic Acid and Betaine-based Therapeutic Deep Eutectic System for Enhanced Transdermal Delivery of Ascorbic Acid.

L-ascorbic acid (AA), a potent antioxidant, is commonly used topically in the pharmaceutical and cosmetic fields. However, the incorporation of AA into topical formulations is difficult because of its highly unstable nature and relatively poor skin permeability. In this study, we propose an alternative strategy for improving the solubility and topical delivery of AA through its conversion to a therapeutic deep eutectic system (THEDES). AA and betaine (Bet)-based THEDESs were prepared at certain molar ratios and characterized using polarized optical microscopy, Fourier transform infrared spectroscopy, and differential scanning calorimetry. Solubility tests showed that AA in the form of THEDES was readily soluble in various polyols (glycerin, 1,3-butylene glycol, dipropylene glycol, and 1,3-propanediol) at a high concentration (approximately 40%). Furthermore, compared to AA alone or the physical mixture of AA and Bet, AA-based THEDES significantly enhanced AA delivery through porcine skin. In an in vivo human study, THEDES-containing serum reduced the markers of aging and induced an even skin tone. These findings indicate the utility of AA and Bet-based THEDES as novel transdermal delivery systems for AA. Furthermore, our approach also showed good extension to developing gluconolactone, a well-known natural antioxidant, and Bet-based THEDES, showing potential application in transdermal delivery systems.

The eutectic compositional space in Al-Cr-Fe-Ni system utilizing the high-throughput Calphad approach

Eutectic High-Entropy Alloys (EHEAs) show promise in balancing strength and ductility, along with excellent castability and chemical homogeneity. However, identifying optimal eutectic compositions in HEAs has been a persistent challenge, primarily due to the lacuna of multi-component phase diagrams. In addressing this challenge, the eutectic compositional space in Al-Cr-Fe-Ni is unveiled for the first time as a case study using the High-Throughput Calphad methodology. By integrating the Python application programming interface into Thermo-Calc, Latin Hypercube Sampling generated 100,000 compositions examined for eutectic formation based on thermodynamic parameters. This analysis revealed the significant correlation of valence electron concentration, enthalpy of mixing, and atomic size difference on eutectic formation. Moreover, the predictions of the proposed design methodology were compared with reported eutectic compositions, exhibiting excellent agreement. Further, a novel dual-phase eutectic alloy featuring an FCC+B2 combination predicted through the proposed design framework has been successfully cast, providing further experimental validation.

A simple model of the soil freezing characteristic curve for saline soils with two freezing stages

Soil freezing characteristic curve (SFCC) describes the relationship between unfrozen water and subzero temperature, which is of significance for the simulation of heat, water, salt migration in cold regions. There are two phase transition stages in some saline soils, which is often explained by the phase equilibrium of bulk solution. However, the second phase transition and chemical characteristic of solute are ignored in the current coupling numerical models for freezing-thawing soils. The newest SFCC methods considering abovementioned two items are not applicable to numerical models due to complex calculation or irregularly changeable parameters. To solve those problems, a simple model was proposed in this paper. Firstly, the complete phase diagram of pore solution at icing stage was speculated from published experimental SFCCs of saline soils. Then, the temperatures of saline soils at freezing and eutectic points were quantitative expressed with phase diagram of bulk solution and SFCC of nonsaline soil, and the criteria determining whether single icing stage or icing-eutectic stage occurs in saline soils was proposed. A synthetic index was used to describe the effects of soil matrix and initial solute concentration on the exponent. Only three constant parameters were introduced to reflect the soil matrix effect on phase transition points of pore solution and the influence of chemical characteristic of solute on pore water freezing process. Finally, the model was validated by the experimental data of saline soils and showed good results and ease of use compared to a widely used theorical model for saline soil with single freezing stage and other two models both considering two phase transitions. The work provides a deeper view of freezing process in saline soils and promote the improvement of numerical simulation effect for heat, water and salt migration in seasonal freezing-thawing areas.

Characterization of camphor: thymol or dl-menthol eutectic mixtures; Structure, thermophysical properties, and lidocaine solubility

The low solubility of drugs in aqueous media is a major problem for the pharmaceutical industry. Among the solutions proposed, the use of eutectic mixtures can be highlighted. In them, the components used can also increase the therapeutic advantages of the active principle. In this work, we analyzed the solubility of lidocaine in mixtures of camphor + thymol or dl-menthol. These binary eutectic solvents were also characterized. For all this, several NMR techniques were used and different thermophysical properties (density, speed of sound, refraction index, isobaric molar heat capacity, surface tension, and kinematic viscosity) were measured. The results indicated that the interaction of camphor with thymol was stronger than with dl-menthol, providing a more compact fluid. On the contrary, the steric hindrance was greater in the mixture with dl-menthol, giving rise to a more viscous liquid. Furthermore, the lidocaine was significantly more soluble (up to 540 times) in these mixtures than in water. The lidocaine showed the strongest interactions with thymol molecules, somewhat weaker with dl-menthol, and the weakest were with camphor ones.

Research on NaCl-KCl High-Temperature Thermal Storage Composite Phase Change Material Based on Modified Blast Furnace Slag

The high-temperature composite phase change materials (HCPCMs) were prepared from solid waste blast furnace slag (BFS) and NaCl-KCl binary eutectic salt to achieve efficient and cost-effective utilization. To ensure good chemical compatibility with chlorine salt, modifier fly ash (FA) was incorporated and subjected to high-temperature treatment for the processing of industrial solid waste BFS, which possesses a complex chemical composition. The HCPCMs were synthesized through a three-step process involving static melting, solid waste modification, and mixing–cold pressing–sintering. Then, the influence of the modification method and the amount of SiC thermal conductivity reinforced material on chemical compatibility and thermodynamic performance was explored. The results demonstrate that the predominant phase of the modified solid waste is Ca2Al2SiO7, which exhibits excellent chemical compatibility with chlorine salt. HCPCMs containing less than 50 wt.% chloride content exhibit good morphological stability without any cracks, with a melting temperature of 661.76 °C and an enthalpy value of 108.73 J/g. Even after undergoing 60 thermal cycles, they maintain good chemical compatibility, with leakage rates for melting and solidification enthalpies being only 6.3% and 0.23%, respectively. The equilibrium was achieved when 40 wt.% of chloride salt was encapsulated upon the addition of 10% of SiC, and the incorporation of SiC resulted in an enhancement of thermal conductivity for HCPCMs to 2.959 W/(m·K) at room temperature and 2.400 W/(m·K) at 200 °C, with an average increase of about 2 times. The cost of the prepared HCPCMs experienced a significant reduction of 81.3%, demonstrating favorable economic performance and promising prospects for application. The research findings presented in this article can offer significant insights into the efficient utilization of solid waste.

Influence of Carboxymethyl Cellulose as a Thickening Agent for Glauber's Salt-Based Low Temperature PCM.

This work is focused on a novel, promising low temperature phase change material (PCM), based on the eutectic Glauber's salt composition. To allow phase transition within the refrigeration range of temperatures of +5 °C to +12 °C, combined with a high repeatability of melting-freezing processes, and minimized subcooling, the application of three variants of sodium carboxymethyl cellulose (Na-CMC) with distinct molecular weights (700,000, 250,000, and 90,000) is considered. The primary objective is to optimize the stabilization of this eutectic PCM formulation, while maintaining the desired enthalpy level. Preparation methods are refined to ensure repeatability in mixing components, thereby optimizing performance and stability. Additionally, the influence of Na-CMC molecular weight on stabilization is examined through differential scanning calorimetry (DSC), T-history, and rheology tests. The PCM formulation of interest builds upon prior research in which borax, ammonium chloride, and potassium chloride were used as additives to sodium sulfate decahydrate (Glauber's salt), prioritizing environmentally responsible materials. The results reveal that CMC with molecular weights of 250 kg/mol and 90 kg/mol effectively stabilize the PCM without phase separation issues, slowing crystallization kinetics. Conversely, CMC of 700 kg/mol proved ineffective due to the disruption of gel formation at its low gel point, hindering higher concentrations. Calculations of ionic concentration indicate higher Na ion content in PCM stabilized with 90 kg/mol CMC, suggesting increased ionic interactions and gel strength. A tradeoff is discovered between the faster crystallization in lower molecular weight CMC and the higher concentration required, which increases the amount of inert material that does not participate in the phase transition. After thermal cycling, the best formulation had a latent heat of 130 J/g with no supercooling, demonstrating excellent performance. This work advances PCM's reliability as a thermal energy storage solution for diverse applications and highlights the complex relationship between Na-CMC molecular weight and PCM stabilization.

Unified mechanistic understanding on CO2 sorption by Na-doped Li4SiO4: Experimental and DFT study

The addition of molten Na2CO3 can drastically accelerated the extremely slow sorption kinetics of Li4SiO4-based CO2 sorbents in the sorption enhanced reforming process. However, the lack of a unified consensus about the effect of doped Na2CO3 on the CO2 capture process, now delays the development of more-effective Li4SiO4 sorbents. Here, sorption tests, sturactural characterzations and periodic density functional theory calculations were combined to develop a better mechanistic understanding CO2 sorption on Na-doped Li4SiO4. The Na-doped Li4SiO4 exhibited a better CO2 capture performance than pure Li4SiO4 even below the melting point of any eutectic mixtures. Structural characterizations revealed that rather than generating physical favorable characteristics, the Na doping substituted at the Li site and created lithium–sodium orthosilicates (Li4-xNaxSiO4). Theoretical calculations agreeing with experimental results further demonstrated that Li4-xNaxSiO4 presented a weaker Na-O bond and generated more active phases (quasi Li2O groups) for larger sorption energies, more charge transfers and stronger CO32– bond formation, in turn providing more reactive sites for enhanced CO2 chemisorption as comparing with pure Li4SiO4. Finally, we propose a new and unified sorption mechanism independent of the traditional “melting layer” explanation.

Towards a greater understanding of the deep eutectic phenomenon through examination of the lidocaine-NSAID therapeutic deep eutectic systems

Therapeutic deep eutectic solvents (THEDES) have been attracting increasing attention in the pharmaceutical literature as a promising enabling technology capable of improving physicochemical and biopharmaceutical properties for difficult-to-deliver drug compounds. The current literature has explored amide local anaesthetics and carboxylic acid nonsteroidal anti-inflammatories (NSAIDs) as commonly used THEDES formers for their active hydrogen-bonding functionality. However, little is known about what happens within the “deep eutectic” region where a range of binary compositions present simply as a liquid with no melting events detectable across experimentally achievable conditions. There is also very limited understanding of how parent compounds’ physicochemical properties could impact upon the formation, interaction mechanism, and stability of the formed liquid systems, despite the significance of these information in dose adjustment, industrial handling, and scaling-up of these liquids.In the current work, we probed the “deep eutectic” phenomenon by investigating the formation and physicochemical behaviours of some chosen lidocaine-NSAID systems across a wide range of composition ratios. Our data revealed that successfully formed THEDES exhibited composition dependent Tg variations with strong positive deviations from predicted Tg values using the Gordon-Taylor theory, suggesting substantial interactions within the formed supramolecular structure. Interestingly, it was found that the parent compound’s glass forming ability had a noticeable impact upon such profound interaction and hence could dictate the success of THEDES formation. It has also been confirmed that all successful systems were formed based on charge-assisted hydrogen bonding within their THEDES network, affirming the significant role of partial protonisation on achieving a profound melting point depression. More importantly, the work found that within the “deep eutectic” region there was still an ideal, or thermodynamically preferrable “THEDES point”, which would exhibit excellent stability upon exposure to stress storage conditions.The discoveries of this study bring the literature one step closer to fully understanding the “therapeutic deep eutectic” phenomenon. Through correlation between parent reagents’ physicochemical properties and the synthesised products’ characteristics, we establish a more educated process for the prediction and engineering of THEDES.

Preservation of Bacillus subtilis' cellular liquid state at deep sub-zero temperatures in perchlorate brines.

Although a low temperature limit for life has not been established, it is thought that there exists a physical limit imposed by the onset of intracellular vitrification, typically occurring at ~-20 °C for unicellular organisms. Here, we show, through differential scanning calorimetry, that molar concentrations of magnesium perchlorate can depress the intracellular vitrification point of Bacillus subtilis cells to temperatures much lower than those previously reported. At 2.5 M Mg(ClO4)2, the peak vitrification temperature was lowered to -83 °C. Our results show that inorganic eutectic salts can in principle maintain liquid water in cells at much lower temperatures than those previously claimed as a lower limit to life, raising the prospects of active biochemical processes in low temperature natural settings. Our results may have implications for the habitability of Mars, where perchlorate salts are pervasive and potentially other terrestrial and extraterrestrial, cryosphere environments.

Performance and Phase Change Kinetic Investigations on Capric-Myristic Acid Eutectic Mixtures for Energy-Saving Construction

In the present study, capric acid and myrisic acid were first selected to prepare a capric acid-myrisic acid eutectic mixture using a compounding method. Then, the thermal properties, structural stability and weight loss of capric acid-myrisic acid eutectic mixtures were analyzed using differential scanning calorimetry, Fourier transform infrared and thermogravimetry. Finally, the activation energy and reaction order of the capric acid-myrisic acid eutectic mixture during solid-liquid transformation were calculated using the phase change kinetic methods of Kissinger and Ozawa. The results indicate that capric acid-myrisic acid eutectic mixtures have good thermal cycle stability and stable energy storage in practical applications. The activation energies of capric acid-myrisic acid eutectic mixtures were calculated using the phase change kinetic methods of Kissinger and Ozawa, with values of 345.6 KJ/mol and 333.3 KJ/mol, respectively, indicating that both phase change kinetic methods have good accuracy.

Novel Wide-Working-Temperature NaNO3-KNO3-Na2SO4 Molten Salt for Solar Thermal Energy Storage.

A novel ternary eutectic salt, NaNO3-KNO3-Na2SO4 (TMS), was designed and prepared for thermal energy storage (TES) to address the issues of the narrow temperature range and low specific heat of solar salt molten salt. The thermo-physical properties of TMS-2, such as melting point, decomposition temperature, fusion enthalpy, density, viscosity, specific heat capacity and volumetric thermal energy storage capacity (ETES), were determined. Furthermore, a comparison of the thermo-physical properties between commercial solar salt and TMS-2 was carried out. TMS-2 had a melting point 6.5 °C lower and a decomposition temperature 38.93 °C higher than those of solar salt. The use temperature range of TMS molten salt was 45.43 °C larger than that of solar salt, which had been widened about 13.17%. Within the testing temperature range, the average specific heat capacity of TMS-2 (1.69 J·K-1·g-1) was 9.03% higher than that of solar salt (1.55 J·K-1·g-1). TMS-2 also showed higher density, slightly higher viscosity and higher ETES. XRD, FTIR and Raman spectra SEM showed that the composition and structure of the synthesized new molten salt were different, which explained the specific heat capacity increasing. Molecular dynamic (MD) simulation was performed to explore the different macroscopic properties of solar salt and TMS at the molecular level. The MD simulation results suggested that cation-cation and cation-anion interactions became weaker as the temperature increased and the randomness of molecular motion increased, which revealed that the interaction between the cation cluster and anion cluster became loose. The stronger interaction between Na-SO4 cation-anion clusters indicated that TMS-2 molten salt had a higher specific heat capacity than solar salt. The result of the thermal stability analysis indicated that the weight losses of solar salt and TMS-2 at 550 °C were only 27% and 53%, respectively. Both the simulation and experimental study indicated that TMS-2 is a promising candidate fluid for solar power generation systems.

Transport property mechanism of semiconducting x MgO:(50-x) PbO:50V2O5 glasses

ABSTRACT The electrical properties of semiconducting Oxide glasses with composition x MgO(50-x) PbO:50V2O5 glasses have been investigated. The glasses were prepared by the normal melt quenching technique. The X-ray diffractograms of the present glass system show that the prepared glass samples are perfectly amorphous. The DSC patterns indicate that the MgO-substituted glass samples behave like the eutectic composition up to x = 15 mol%. The DC conductivity is measured in the temperature range of 300 to 500 K, and data are fitted with Mott’s and Schnakenberg models. The conductivity of all the glass compositions increases with increasing MgO content. The conduction mechanism of these glasses was non-adiabatic. The various parameters, such as activation energy, average site separation between transition metal ions and polaron radius, have been calculated and found consistent with Mott’s small polaron hopping non-adiabatically between different sites. The Hruby parameter (kg) for this glass system has been calculated and discussed.