Ethyl Glycidyl Ether Research Articles

2-(Benzylthio)ethyl Glycidyl Ether: A Gateway to Redox-Responsive Polyethers

2-(Benzylthio)ethyl Glycidyl Ether: A Gateway to Redox-Responsive Polyethers

Tailoring thermoresponsiveness of biocompatible polyethers: copolymers of linear glycerol and ethyl glycidyl ether.

Linear polyglycerol is known as a highly hydrophilic and biocompatible polymer that is currently considered for numerous medical applications. Derived from this well-known structure, the synthesis of highly biocompatible, thermoresponsive polyether copolymers via statistical anionic ring-opening copolymerization of ethyl glycidyl ether (EGE) and ethoxy ethyl glycidyl ether (EEGE) is described. Subsequent deprotection of the acetal groups of EEGE yields copolymers of linear glycerol (linG) and EGE, P(linG-co-EGE). These copolymers showed monomodal and narrow molecular weight distributions with dispersities Đ ≤ 1.07. The microstructure was investigated via in situ1H NMR kinetics experiments, revealing reactivity ratios of rEEGE = 1.787 ± 0.007 and rEGE = 0.560 ± 0.002, showing a slightly favored incorporation of EEGE over EGE. Due to the deliberate incorporation of rather hydrophobic EGE units into the water soluble linPG, tunable thermoresponsive behavior is achieved with cloud point temperatures Tcp between 9.0-71.4 °C. Besides the commonly utilized method turbidimetry, temperature-dependent 1H NMR measurements were used for more accurate and reproducible results. The change of the hydrodynamic radii rH of the copolymers and their aggregates upon reaching Tcp was investigated via DOSY NMR spectroscopy. To explore possible biomedical applications, as an example, the cell viability and immunology of an exemplary P(linG-co-EGE) copolymer sample was investigated. Since both, cell viability and immunology are comparable to the gold standard PEG, the herein presented copolymers show high potential as biocompatible and thermoresponsive alternatives to PEG for biomedical applications.

Acid-sensitive stable polymeric micelle-based oxidative stress nanoamplifier as immunostimulating anticancer nanomedicine.

Oxidative stress amplifying compounds could elicit selective killing of cancer cells with minimal toxicity to normal cells and also induce immunogenic cell death (ICD). However, compared to conventional anticancer drugs, oxidative stress amplifying compounds have inferior therapeutic efficacy. It can be postulated that the anticancer therapeutic efficacy and immunostimulating activity of oxidative stress amplifying hybrid prodrug (OSamp) could be fully maximized by employing ultrastable polymeric micelles as drug carriers. In this work, we developed tumour-targeted oxidative stress nanoamplifiers, composed of OSamp, amphiphilic poly(ethylene glycol) methyl ether-block-poly(cyclohexyloxy ethyl glycidyl ether)s (mPEG-PCHGE) and a lipopeptide containing Arg-Gly-Asp (RGD). Tumour targeted OSamp-loaded mPEG-PCHGE (T-POS) micelles exhibited excellent colloidal stability and significant cytotoxicity to cancer cells with the expression of DAMPs (damage-associated molecular patterns). In the syngeneic mouse tumour model, T-POS micelles induced significant apoptotic cell death to inhibit tumour growth without noticeable body weight changes. T-POS micelles also induced ICD and activated adaptive immune responses by increasing the populations of cytotoxic CD4+ and CD8+ T cells. Therefore, these results suggest that T-POS micelles hold great translational potential as immunostimulating anticancer nanomedicine.

Tailoring Rate and Temperature-Dependent Fracture of Polyether Networks with Organoaluminum Catalysts

Polyethers are ubiquitous in engineering and biomedical applications because their oxygen-rich backbone allows them to interact with a variety of polar small molecules such as ions, gases, and pharmaceuticals. These materials are also able to sustain large reversible deformations when cross-linked at the molecular scale, leading to an interesting combination of functional and mechanical properties. We synthesized two families of polyether networks by organoaluminum-catalyzed ring-opening copolymerization of ethyl glycidyl ether (EGE) monomer and 1,4-butanediol diglycidyl ether (BDGE) cross-linker and explored the relationship between network architecture and fracture properties. The key result is that living copolymerizations, as enabled by a chelate of triethylaluminum with dimethylaminoethanol, afford access to a critical cross-link density, νx ≈ 3 × 1025 chains/m3, and loss tangent, tan(δ) ≈ 0.09, at which fracture is dominated by chain scission rather than friction. Such control over the fracture resistance of polyether networks unveils the potential of living copolymerizations to design the functional and mechanical properties of soft materials.

Influence of the Polymer Structure and its Crystallization on the Interface Resistance in Polymer-LATP and Polymer-LLZO Hybrid Electrolytes

For many years, composite electrolytes (CEs) consisting of a mixture of inorganic solid electrolytes (ISEs) and polymer electrolytes (PEs) have been investigated as promising materials for the scalable production of solid-state batteries (SSBs). It is believed that CEs can overcome limitations of the single components, namely the low room-temperature conductivity and lithium ion transference number of PEs and the poor mechanical properties and high temperature processing necessary for ISE ceramics. To facilitate ion transport in the CE between the electrodes a low and stable charge transfer resistance between PEs and ISEs is required. In this study, we investigate by means of electrochemical impedance spectroscopy (EIS) how polymer crystallinity influences the charge-transfer resistance of hetero-ionic interfaces between polyethylene oxide (PEO)-based electrolytes and Li1.5Al0.5Ti1.5(PO4)3 (LATP) as well as Li6.25Al0.25La3Zr2O12 (LLZO) as ISEs. Crystallization of PEO based electrolytes below their melting temperature leads to an increased charge-transfer resistance. On the other hand, electrolytes based on the amorphous poly[2-(2-(2-methoxyethoxy)ethoxy)ethyl glycidyl ether (PTG) do not show an increased charge transfer resistance. Finally, the conductivity of ISE-rich CEs is measured as a function of their temperature and composition for elucidating how the interface resistance influences charge transport in ISE-rich composite electrolytes.

End Group Functionality of 95-99%: Epoxide Functionalization of Polystyryl-Lithium Evaluated via Solvent Gradient Interaction Chromatography.

End group functionality is a key parameter of functional polymer chains. The end-capping efficiency of living polystyryl lithium with various epoxides, namely ethylene oxide (EO), ethoxy ethyl glycidyl ether (EEGE) and isopropylidene glyceryl glycidyl ether (IGG), is investigated with solvent gradient interaction chromatography (SGIC). Generally, end-capping efficiencies >95% are observed. Hydroxy functional polystyrene (PS-OH, PS-EEGE-OH, and PS-IGG-OH) with molar masses ranging from 13.8 to 15.0kgmol-1 are obtained, with dispersities of 1.05-1.06. Deprotection of the acetal (PS-EEGE-OH) and ketal protective group (PS-IGG-OH) is investigated. Nearly quantitative deprotection (>99%) resulting in the corresponding multihydroxy functional PS (PS-(OH)2 and PS-(OH)3 ) are observed via SGIC. Esterification of PS-OH with succinic anhydride shows a conversion of 98% to the corresponding ester. A detailed picture of side reactions during the carbanionic polymer synthesis subsequent epoxide termination is obtained, demonstrating 95-99% terminal functionality. Depending on the polarity of the end group, an elution order of PS-OH<PS-(OH)2 <PS-(OH)3 <PS-COOH is obtained in SGIC. The study demonstrates both the analytical power of SGIC and the exceptionally high terminal functionalization efficiency of anionic polymerization methods.

Controlling Architecture and Mechanical Properties of Polyether Networks with Organoaluminum Catalysts

Soft materials can sustain large, elastic, and reversible deformations, finding widespread use as elastomers and hydrogels. These materials constitute 3-D polymer networks and are typically synthesized by cross-linking polymer chains or copolymerizing monomer and cross-linker. Seminal investigations have enabled control over the network architecture by cross-linking chains of poly(dimethylsiloxane), poly(1,4-butadiene), or tetra-poly(ethylene glycol); however, as soft materials become attractive for robotics, electronics, and prosthetics, codesigning the network architecture, mechanical, and functional properties has become pressing. We investigate the relationship among reaction pathway, network architecture, and mechanical properties in poly(ethyl glycidyl ether) networks synthesized by epoxide ring-opening polymerization with two organoaluminum catalysts. The key result is that uncontrolled polymerizations yield loosely cross-linked, entangled, soft, and extensible networks, whereas more controlled polymerizations, instead, lead to highly cross-linked, stiff, and brittle networks. Such catalytic control over network architecture and mechanical properties could enable design of novel soft, tough, and functional materials.

Polyethers Based on Short-Chain Alkyl Glycidyl Ethers: Thermoresponsive and Highly Biocompatible Materials.

The polymerization of short-chain alkyl glycidyl ethers (SCAGEs) enables the synthesis of biocompatible polyethers with finely tunable hydrophilicity. Aliphatic polyethers, most prominently poly(ethylene glycol) (PEG), are utilized in manifold biomedical applications due to their excellent biocompatibility and aqueous solubility. By incorporation of short hydrophobic side-chains at linear polyglycerol, control of aqueous solubility and the respective lower critical solution temperature (LCST) in aqueous solution is feasible. Concurrently, the chemically inert character in analogy to PEG is maintained, as no further functional groups are introduced at the polyether structure. Adjustment of the hydrophilicity and the thermoresponsive behavior of the resulting poly(glycidyl ether)s in a broad temperature range is achieved either by the combination of the different SCAGEs or with PEG as a hydrophilic block. Homopolymers of methyl and ethyl glycidyl ether (PGME, PEGE) are soluble in aqueous solution at room temperature. In contrast, n-propyl glycidyl ether and iso-propyl glycidyl ether lead to hydrophobic polyethers. The use of a variety of ring-opening polymerization techniques allows for controlled polymerization, while simultaneously determining the resulting microstructures. Atactic as well as isotactic polymers are accessible by utilization of the respective racemic or enantiomerically pure monomers. Polymer architectures varying from statistical copolymers, di- and triblock structures to star-shaped architectures, in combination with PEG, have been applied in various thermoresponsive hydrogel formulations or polymeric surface coatings for cell sheet engineering. Materials responding to stimuli are of increasing importance for "smart" biomedical systems, making thermoresponsive polyethers with short-alkyl ether side chains promising candidates for future biomaterials.

Precise Synthesis and Thermoresponsive Property of Poly(ethyl glycidyl ether) and Its Block and Statistic Copolymers with Poly(glycidol).

In this paper, we describe a comprehensive study of the thermoresponsive properties of statistic copolymers and multiblock copolymers synthesized by poly(glycidol)s (PG) and poly(ethyl glycidyl ether) (PEGE) with different copolymerization methods. These copolymers were first synthesized by ring-opening polymerization (ROP), which was initiated by tert-butylbenzyl alcohol (tBBA) and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris(dimethylamino)phosphoranylidenamino]-2Λ5,4Λ5-catenadi(phosphazene) (t-Bu-P4) as the catalyst, and then the inherent protective groups were removed to obtain the copolymers without any specific chain end groups. The thermoresponsive property of the statistic copolymer PGx-stat-PEGEy was compared with the diblock copolymer PGx-b-PEGEy, and the triblock copolymers were compared with the pentablock copolymers. Among them, PG-stat-PEGE, PG-b-PEGE-b-PG-b-PEGE-b-PG, and PEGE-b-PG-b-PEGE-b-PG-b-PEGE, and even the specific ratio of PEGE-b-PG-b-PEGE, exhibited LCST-type phase transitions in water, which were characterized by cloud point (Tcp). Although the ratio of x to y affected the value of the Tcp of PGx-stat-PEGEy, we found that the disorder of the copolymer has a decisive effect on the phase-transition behavior. The phase-transition behaviors of PG-b-PEGE, part of PEGE-b-PG-b-PEGE, and PG-b-PEGE-b-PG copolymers in water present a two-stage phase transition, that is, firstly LCST-type and then the upper critical solution temperature (UCST)-like phase transition. In addition, we have extended the research on the thermoresponsive properties of EGE homopolymers without specific α-chain ends.

Highly Ordered Nanoscale Film Morphologies of Block Copolymers Governed by Nonlinear Topologies.

Among many properties of cyclic block copolymers, the notable domain spacing (d-spacing) reduction offers nonlinear topology as an effective tool for developing block copolymers for nanolithography. However, the current consensus regarding the topology-morphology correlation is ambiguous and in need of more studies. Here we present the morphological investigation on nanoscale films of cyclic and tadpole-shaped poly(n-decyl glycidyl ether-block-2-(2-(2-methoxyethoxy)ethoxy)ethyl glycidyl ether)s and their linear counterpart via synchrotron grazing-incidence X-ray scattering. All copolymers form phase-separated nanostructures, in which only the nonlinear copolymers form highly ordered and unidirectional nanostructures. Additionally, d-spacings of cyclic and tadpole-shaped block copolymers are 49.3-53.7% and 25.0-32.5% shorter than that of their linear counterpart, respectively, exhibiting greater or comparable d-spacing reductions against the experimentally and theoretically achieved values from the literature. Overall, this study demonstrates that cyclic and tadpole topologies can be utilized in developing materials with miniaturized dimensions, high structural ordering, and unidirectional orientation for various nanotechnology applications.

PH-Responsive Amphiphilic Polyether Micelles with Superior Stability for Smart Drug Delivery.

Despite widespread interest in the amphiphilic polymeric micelles for drug delivery systems, it is highly desirable to achieve high loading capacity and high efficiency to reduce the side effects of therapeutic agents while maximizing their efficacy. Here, we present a novel hydrophobic epoxide monomer, cyclohexyloxy ethyl glycidyl ether (CHGE), containing an acetal group as a pH-responsive cleavable linkage. A series of its homopolymers, poly(cyclohexyloxy ethyl glycidyl ether)s (PCHGEs), and block copolymers, poly(ethylene glycol)-block-poly(cyclohexyloxy ethyl glycidyl ether)s (mPEG-b-PCHGE), were synthesized via anionic ring-opening polymerization in a controlled manner. Subsequently, the self-assembled polymeric micelles of mPEG-b-PCHGE demonstrated high loading capacity, excellent stability in biological media, tunable release efficiency, and high cell viability. Importantly, quantum mechanical calculations performed by considering prolonged hydrolysis of the acetal group in CHGE indicated that the CHGE monomer had higher hydrophobicity than three other functional epoxide monomer analogues developed. Furthermore, the preferential cellular uptake and in vivo therapeutic efficacy confirmed the enhanced stability and the pH-responsive degradation of the amphiphilic block copolymer micelles. This study provides a new platform for the development of versatile smart polymeric drug delivery systems with high loading efficiency and tailorable release profiles.

Regulating Dynamics of Polyether-Based Triblock Copolymer Hydrogels by End-Block Hydrophobicity

The relaxation dynamics of poly(ethyl glycidyl ether-co-isopropyl glycidyl ether-b-ethylene oxide-b-ethyl glycidyl ether-co-isopropyl glycidyl ether) triblock copolymer hydrogels were investigated as a function of the end-block hydrophobicity and temperature primarily using the oscillatory rheometer, which is crucial to understand the unique viscoelastic behaviors including injectability and self-healing property of the self-assembled hydrogels. Lower critical solution temperature behavior of the poly(alkyl glycidyl ether) end-blocks was harnessed by random copolymerization of poly(ethyl glycidyl ether) (EGE) and poly(isopropyl glycidyl ether) (iPGE), resulting in the remarkable temperature responsiveness of the hydrogel. As the fraction of hydrophilic monomer (i.e., EGE) increases, the sol-to-gel transition occurs at higher temperature and higher polymer concentration. The hydrogel relaxation measured by the oscillatory rheometer becomes faster with decreasing temperature and increasing fraction of hydrophilic monomers. In particular, we observed that a small increment of the hydrophilic monomer fraction significantly reduces the unfavorable interaction between the end-block and aqueous media, resulting in faster hydrogel relaxation dynamics. All polyether-based hydrogels showed biocompatibility and injectability, indicating promising soft materials for biological and biomedical applications. The results are discussed in terms of the current understanding of self-assembled triblock copolymer hydrogels, and particular attention is paid to the issue of chain dynamics.

Fabrication and Characterization of a Modified Conjugated Molecule-Based Moderate-Temperature Curing Epoxy Resin System

2-methylimidazole derivative (EGE-2MI) was synthesized through the reaction of ethyl glycidyl ether (EGE) with conjugated molecule 2-methylimidazole (2-MI). The structure was confirmed by Fourier transform infrared spectroscopy (FTIR)、1H-nuclear magnetic resonance spectroscopy (1H-NMR) and differential scanning calorimeter (DSC). The synthesized EGE-2MI was applied in epoxy resin E-51 as latent curing agent. Kinetics of the curing reaction were studied by DSC method, optimum curing process parameters were determined, storage life of the resin system at room temperature was evaluated, mechanical properties of the moderate-temperature cured products were also tested and analyzed. The results revealed that epoxy resin system using EGE-2MI as curing agent can be efficiently cured at 110~120 °C, with an activation energy of 86.34 kJ/mol. The storage period of EGE-2MI/ Cyanate resin (CE) system can reach 14 days under ambient temperature. In addition, the cured mixture with EGE-2MI/CE has a tensile strength of 40 MPa and an Al-Al adhesion shear strength of 20.11 MPa.

A supramolecular interaction strategy enabling high-performance all solid state electrolyte of lithium metal batteries

In general, solid polymer electrolyte suffers from relatively low ionic conductivity and inferior oxidation stability. Herein, these issues can be effectively addressed by a supramolecular strategy based on the intermolecular interaction between a novel amorphous comb polymer of poly[propylene oxide-co-2-(2-methoxyethoxy)ethyl glycidyl ether] [P(PO/EM)] and highly fluorinated anion based lithium salt of lithium trifluoro(perfluoro-tert-butyloxyl)borate (LiTFPFB). The supramolecular solid state polymer electrolyte exhibits superior lithium ion transference number (0.59). It is noted that this polymer electrolyte presents enlarged electrochemical window up to 4.6 V (vs. Li/Li+ at 70 °C), which is resulted from the powerful supramolecular interaction between polymer skeleton and lithium salt. The supramolecular interaction was confirmed by Fourier transform infrared spectroscopy (FT-IR) analysis, solid state nuclear magnetic resonance (NMR) spectroscopy, stripping and self-healing tests. More bracingly, high voltage LiFe0.2Mn0.8PO4/Li cell based on this polymer electrolyte exhibits improved cycling performance (capacity retention is 88.7% after 100 cycles at 0.1C). Meanwhile, this well-designed electrolyte endows LiFe0.2Mn0.8PO4/Li cell pouch cell excellent safety characteristic even under deformation and truncation procedures. This supramolecular strategy paves a new way for boosting high energy density all solid state lithium metal batteries.

Preparation of carbon fibers coated with epoxy sizing agents containing degradable acetal linkages and synthesis of carbon fiber-reinforced plastics (CFRPs) for chemical recycling

New epoxy resins containing degradable acetal linkages were synthesized by the addition reaction of bisphenol-A (BA) and epoxy-functionalized vinyl ethers containing hydrophilic oxyethylene chains, 2-(vinyloxy)ethyl glycidyl ether (VEGE) and 2-[2-(vinyloxy)ethoxy]ethyl glycidyl ether (VEEGE). Carbon fibers were applied with the obtained degradable epoxy resin-based sizing agents (designated as BA-VEGE and BA-VEEGE) in ordinary (1.4 ~ 2.2 wt%) or excess (6.4 ~ 13.4 wt%) amounts. Interfacial adhesion between the carbon fibers applied with the degradable epoxy resin-based sizing agents and matrix resins (bisphenol-A-type epoxy resin) was evaluated by the microdroplet method. Carbon fibers with both degradable epoxy resins as a sizing agent showed improved adhesive properties compared with the desized carbon fibers. Using the degradable sizing agent-applied carbon fibers, carbon fiber-reinforced plastics (CFRPs) were prepared by laminating prepreg sheets and heating them under pressure. The tensile properties of the CFRPs with [0]50 lay-up did not depend on the structure of the sizing agents, but the tensile strength decreased as the amount of sizing agent used increased. On the other hand, the tensile properties of the CFRPs with [0/90]12S lay-up were not dependent on the structure or volume of sizing agents used. The impact toughness of the CFRPs was evaluated by the charpy impact test. When an ordinary volume of sizing agent was applied, the CFRPs with degradable epoxy resin-based sizing agents exhibited higher levels of impact strength than the commercial sizing agent-based CFRPs. However, applying an excessive volume of sizing agent to carbon fibers led to a decline in impact strength. The degradation reaction was conducted under acidic conditions by the treatment of HCl at room temperature or 70 °C. CFRPs with degradable epoxy resins as sizing agents in ordinary volumes were barely decomposed due to insufficient degradable regions in the CFRP components. However, the CFRPs applied with excess degradable sizing agents decomposed and carbon fibers were recovered. The new epoxy resins containing degradable acetal linkages were synthesized and used as sizing agents for carbon fibers. Using the degradable sizing agent-applied carbon fibers, the carbon fiber-reinforced plastics (CFRPs) were prepared via laminating prepreg sheets and heating them under pressure. The mechanical properties of the obtained CFRPs were comparable with those of the conventional CFRPs. With the treatment of acidic conditions, the CFRPs with the degradable sizing agents on carbon fiber surface were decomposed and the carbon fibers could be recovered.

Solid polymer electrolytes based on polystyrene‐polyether block copolymers having branched ether structure

To obtain solid polymer electrolytes (SPEs) having high ionic conductivity together with mechanical integrity, we have synthesized polystyrene (PSt)‐polyether (PE) diblock copolymers via one‐pot anionic polymerization. The PSt block is expected to aggregate to act as hard fillers in the SPE to enhance the mechanical property. The PE block consists of random copolymer (P(EO‐r‐MEEGE)) of ethylene oxide (EO) and 2‐(2‐methoxyethoxy) ethyl glycidyl ether (MEEGE) in different molar ratios ([EO]/[MEEGE] = 100/0, 86/14, 75/25, 68/32, and 41/59). The introduction of the MEEGE moiety in PEO reduced the crystallinity of PEO, and the fast motion of the MEEGE side chain caused plasticization of the PE block, thereby contributing to the fast ion transport. SPEs were fabricated by mixing the obtained diblock copolymer (PSEx) and lithium bis(trifluoromethanesulfonyl) amide (LiTFSA) with [Li]/[O] = 0.05. Ionic conductivity of the obtained SPEs was dependent on the molar ratio of EO in the PE block (x) as well as the weight fraction of PE block (fPE) in the block copolymer. PSE0.86 (fPE = 0.65) exhibited high ionic conductivity (3.3 × 10−5 S cm−1 at 30°C; 1.1 × 10−4 S cm−1 at 60°C) comparable with that of P(EO‐r‐MEEGE) (PE0.85; fPE = 1.00) (9.8 × 10−5 S cm−1 at 30°C; 4.0 × 10−4 S cm−1 at 60°C).

A Comparative Study of Dynamic Light and X-ray Scatterings on Micelles of Topological Polymer Amphiphiles.

Micelles were prepared in organic solvents by using three topological polymer amphiphiles: (i) cyclic poly(n-decyl glycidyl ether-block-2-(2-(2-methoxyethoxy)ethoxy)ethyl glycidyl ether) (c-PDGE-b-PTEGGE) and (ii) its linear analogue (l-PDGE-b-PTEGGE); (iii) linear poly(6-phosphorylcholinehexylthiopropyl glycidyl ether-block-n-dodecanoyl glycidyl ether) (l-PPCGE-b-PDDGE). For the individual micelle solutions, the size and distribution were determined by dynamic light scattering (DLS) and synchrotron X-ray scattering analyses. The synchrotron X-ray scattering analysis further found that c-PDGE-b-PTEGGE forms oblate ellipsoidal micelle in an ethanol/water mixture, l-PDGE-b-PTEGGE makes prolate ellipsoidal micelle in an ethanol/water mixture, and l-PPCGE-b-PDDGE forms cylindrical micelle in chloroform. This comparative study found that there are large differences in the size and distribution results extracted by DLS and X-ray scattering analyses. All possible factors to cause such large differences are discussed. Moreover, a better use of the DLS instrument with keeping its merits is proposed.

Fast and solvent‐free microwave‐assisted synthesis of thermoresponsive oligo(glycidyl ether)s

ABSTRACTLow‐molecular weight linear poly(glycidyl ether)s are typically synthesized via the “classical,” oxy‐anionic ring‐opening polymerization (ROP) of glycidyl ether monomers at elevated temperatures. To reduce reaction times, a fast process was developed to synthesize oligo(glycidyl ether)s (OGEs) in bulk at a gram‐scale utilizing microwave heating. Well‐defined thermoresponsive copolymers comprising glycidyl methyl ether and ethyl glycidyl ether with molecular weights of up to 3 kDa were synthesized via microwave‐assisted ROP with reaction times of approximately 10 min. The fast reaction kinetics were attributed to the rapid and uniform heating and high temperatures reached during the reaction. Consequently, no significant microwave‐specific acceleration of the oxy‐anionic ROP was observed. The temperature‐triggered phase transition of the OGEs in aqueous solution revealed cloud point temperatures that are highly dependent on the OGE molecular weight, concentration, and comonomer composition, which extends previously reported data. Furthermore, oligo(glycidyl ether) acrylates (OGEAs) with reactive, functional end groups were directly accessible via in situ quenching of the anionic, microwave‐assisted ROP with acrylic acid chloride. The obtained thermoresponsive OGEA macromonomers represent a promising material for the functionalization of surfaces via radical grafting methods to obtain functional, thermoresponsive coatings with potential application in cell culture. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 2496–2504

Synthesis of PEGylated alternating copolymer bearing thioether pendants for oxidation responsive drug delivery

Synthetic polymers that can change their physicochemical properties in response to physiological stimuli have attracted particular interest for constructing smart drug delivery systems. In the present work, a novel oxidation-responsive block copolymer bearing thioether pendants was designed and synthesized by ring-opening alternating copolymerization (ROAP) of phthalic anhydride (PA) and 2-(methylthio)ethyl glycidyl ether (MTG) monomer using mPEG-OH as the macroinitiator and a phosphazene base, t-BuP1, as the catalyst. The obtained mPEG-b-P(PA-alt-MTG) copolymer could self-assemble into spherical micelles in water with an average size of about 30 nm and a critical micelle concentration value of 7.44 × 10−3 mg/mL. 1H NMR results indicated that the hydrophobic thioether group can be selectively oxidized to hydrophilic sulfoxide by H2O2, leading to disassociation of the micelles as illustrated by the TEM observation. Nile Red, as a model drug, was loaded into the copolymer micelles. The intensity of the fluorescence emission decreased sharply after addition of H2O2, indicating an oxidation-triggered drug release. Moreover, the drug-loaded micelles could be effectively internalized into MCF-7 cells, as indicated by the confocal laser scanning microscopy (CLSM) and flow cytometry (FCM) studies. MTT assay further demonstrated that the synthesized copolymer showed good biocompatibility towards L929 cell, even at a concentration up to 0.5 mg/mL. In sum, this kind of copolymer may have great potential applications in oxidation responsive drug delivery.

Synthesis of μ-ABC Tricyclic Miktoarm Star Polymer via Intramolecular Click Cyclization.

Cyclic polymers exhibit unique physical and chemical properties because of the restricted chain mobility and absence of chain ends. Although many types of homopolymers and diblock copolymers possessing cyclic architectures have been synthesized to date, there are relatively few reports of cyclic triblock terpolymers because of their synthetic difficulties. In this study, a novel synthetic approach for μ-ABC tricyclic miktoarm star polymers involving t-Bu-P4-catalyzed ring-opening polymerization (ROP) of glycidyl ethers and intramolecular copper-catalyzed azido-alkyne cycloaddition (CuAAC) was developed. First, the t-Bu-P4-catalyzed ROP of decyl glycidyl ether, dec-9-enyl glycidyl ether, and 2-(2-(2-methoxyethoxy) ethoxy) ethyl glycidyl ether with the aid of functional initiators and terminators was employed for the preparation of a clickable linear triblock terpolymer precursor possessing three azido and three ethynyl groups at the selected positions. Next, the intramolecular CuAAC of the linear precursor successfully produced the well-defined tricyclic triblock terpolymer with narrow dispersity in a reasonable yield. The present strategy is useful for synthesizing model polymers for studying the topological effects on the triblock terpolymer self-assembly.