Ether-based Electrolyte Research Articles

Upgrading Electrolyte Antioxidant Chemistry by Constructing Potential Scaling Relationship.

Rational design of advanced electrolytes to improve the high-voltage capability has been attracting wide attention as one critical solution to enable next-generation high-energy-density batteries. However, the limited understanding of electrolyte antioxidant chemistry as well as the lack of valid quantization approaches have resulted in knowledge gap, which hinders the formulation of new electrolytes. Herein, we construct a standard curve based on representative solvation structures to quantify the oxidation stability of ether-based electrolytes, which reveals the linear correlation between the oxidation potential and the atomic charge of the least oxidation-resistant solvent. Dictated by the regularity between solvation composition and oxidation potential, a (Trifluoromethyl)cyclohexane-based localized high-concentration electrolyte dominated by anion-less solvation structures was designed to optimize the cycling performance of 4.5 V 30 μm-Li||3.8 mAh cm-2-LiCoO2 batteries, which maintained 80 % capacity retention even after 440 cycles. The consistency of experimental and computational results validates the proposed principles, offering a fundamental guideline to evaluate and design aggressive electrochemical systems.

Anion-Reinforced Solvation Structure Enables Stable Operation of Ether-Based Electrolyte in High-Voltage Potassium Metal Batteries.

Electrolytes with anion-dominated solvation are promising candidates to achieve dendrite-free and high-voltage potassium metal batteries. However, it's challenging to form anion-reinforced solvates at low salt concentrations. Herein, we construct an anion-reinforced solvation structure at a moderate concentration of 1.5 M with weakly coordinated cosolvent ethylene glycol dibutyl ether. The unique solvation structure accelerates the desolvation of K+, strengthens the oxidative stability to 4.94 V and facilitates the formation of inorganic-rich and stable electrode-electrolyte interface. These enable stable plating/stripping of K metal anode over 2200 h, high capacity retention of 83.0 % after 150 cycles with a high cut-off voltage of 4.5 V in K0.67MnO2//K cells, and even 91.5 % after 30 cycles under 4.7 V. This work provides insight into weakly coordinated cosolvent and opens new avenues for designing ether-based high-voltage electrolytes.

CoN//Co9S8 co-embedded in reduced graphene oxide as catalyst for catalytic conversion of polysulfides

Lithium-sulfur (Li–S) batteries with high theoretical specific capacity of 1675 mAh g−1 and energy density of 2600 Wh kg−1 are considered as a promising candidate for energy conversion and storage devices in future. However, some critical dilemmas such as low real energy density, high solubility of ether-based electrolytes and slow redox kinetics of long-chain polysulfides remain unsettled hindering their development. Here we design and propose a high-performance sulfur host material constructed by growing CoN/Co9S8 nanoparticles enclosed in reduced graphene oxide (RGO) and Co9S8 modified separator to enhance the electrochemical performance of Li–S batteries. The results of first principal calculations confirm that the calculated adsorption energies of Li2S8, Li2S6, Li2S4 and Li2S2 on the Co9S8 (111) surface are lower than that of the CoN (111) surface, indicating that the Co9S8 has stronger adsorbing effect with polysulfides. Furthermore, the catalytic effect in Li2S6 symmetric batteries and the nucleation of the Li2S tests display that the CoN/Co9S8@RGO has a fast conversion reaction kinetics and catalytic effect of polysulfides, thereby inhibiting the leakage of the polysulfides. Consequently, the S@CoN/Co9S8@RGO cathode with Co9S8 layer represents a high discharge capacity of 1367.7 mAh g−1 at 0.1C and a prolonged lifespan over 700 cycles at 1 C with an extremely low decay rate of 0.06 % per cycle and high cycling stability.

Electrochemical active interlayer with porous architecture for reliable lithium–sulfur batteries

Although lithium–sulfur batteries have excellent theoretical specific capacity (1675 mAh g−1) and high energy density (2600 wh kg−1), their practical application is hampered by the severe “shuttle effect” of polysulfides in ether-based electrolytes. Soluble polysulfides can migrate across separator and react with lithium metal, resulting in a rapid capacity decay. In this study, we proposed an electrochemical active porous architecture (EPA) interlayer to address this tricky issue. Firstly, the porous architecture guarantees efficient electrolyte diffusion. Additionally, the catalytic vanadium nitride particles within the conductive skeleton can capture soluble polysulfides, accelerate their redox reaction, and suppress the “shuttle effect”, thereby further restraining the parasitic reaction between lithium metal anode and polysulfides. Therefore, integrating the EPA interlayer in the battery enables an initial capability of 1465.8 mAh g−1 at 0.1C and delivers a good rate performance at 2.0C (668.0 mAh g−1). The battery achieves an average capacity of 796.7 mAh g−1 within the first 500 cycles under 0.5C, with a high average Coulombic efficiency of 99.8 %, indicating the practical potential of EPA interlayer design for application in reliable lithium–sulfur batteries.

Revealing Lithium Nitrate-Mediated Solid-Electrolyte Interphase of Lithium Metal Anode via Cryogenic Transmission Electron Microscopy.

The cycle stability of lithium metal anode (LMA) largely depends on solid-electrolyte interphase (SEI). Electrolyte engineering is a common strategy to adjust SEI properties, yet understanding its impact is challenging due to limited knowledge on ultrafine SEI structures. Herein, using cryogenic transmission electron microscopy, we reveal the atomic-level SEI structure of LMA in ether-based electrolytes, focusing on the role of LiNO3 additives in SEI modulation at different temperature (25 and 50 °C). Poor cycle stability of LMA in the baseline electrolyte without LiNO3 additives stems from the Li2CO3-rich mosaic-type SEI. Increased LiNO3 content and elevated operating temperature enhance cyclic performance by forming bilayer or multilayer SEI structures via preferential LiNO3 decomposition, but may thicken the SEI, leading to reduced initial Coulombic efficiency and increased overpotential. The optimal SEI features a multilayer structure with Li2O-rich inner layer and closely packed grains in the outer layer, minimizing electrolyte decomposition or corrosion.

Tuning the End Alkyl Chain of the Ether Solvent to Stabilize the Electrode/Electrolyte Interfaces in the NCM-Li Battery.

Lithium metal batteries (LMBs) combined with a high-voltage nickel-rich cathode show great potential in meeting the growing need for high energy density. The lack of advanced electrolytes has been a major obstacle in the commercialization of high-voltage lithium metal batteries (LMBs), as these electrolytes need to effectively support both a stable lithium metal anode (LMA) and a high-voltage cathode (>4 V vs Li+/Li). In this work, by extending the two terminal methyl groups in DIGDME and TEGDME to n-butyl groups, we design a new weakly solvating electrolyte (2 M LIFSI+TEGDBE) that enables the stable cycling of NMC83 (LiNi0.83Co0.12Mn0.05O2) cathodes. The NMC83 cell exhibits a high and stable Coulombic efficiency (CE) of over 99%, as well as capacity retention of approximately 99.8% after 100 cycles at 0.3 C. X-ray photoelectron spectroscopy analysis (XPS) and high-resolution transmission electron microscope (HRTEM) images revealed that the anion species decomposed first, resulting in the formation of a cathode-electrolyte interface (CEI) film predominantly consisting of decomposition products from the anions on the positive electrode surface. This work links the functional group of solvents with the solvation structure and electrochemical performance of ether-based electrolytes, providing a distinctive sight to design advanced electrolytes for high-energy-density LMBs.

Unlocking the Power of Magnesium Batteries: Synergistic Effect of InSb-C Composites to Achieve Superior Electrochemical Performance.

Pure magnesium anode used in rechargeable magnesium batteries (RMB) exhibits high theoretical capacity but has been challenged by the passivation issue with conventional electrolytes. Alloy-type anodes have the potential to surpass this issue and have attracted increasing attention. However, the kinetic performance and stabilities of conventional alloy anodes are still constrained. In this study, the InSb-10%C anode is synthesized by a two-step high-energy ball milling process. The InSb-10%C anode exhibits a remarkably high capacity of up to 448 mA h g-1, significantly improved cycle performance (234 mA h g-1 at 100 cycles) and rate performance (168 mA h g-1 at 500 mA g-1). The above-mentioned superior performance of the InSb-10%C anode for RMBs is attributed to the cellular graphitized amorphous carbon composite structure (CGA) which effectively refines the particle size and restricts the volume expansion. Additionally, the reduced surface electron density of InSb combined with the high conductivity resulting from graphitization enhances the Mg2+ diffusion performance. Notably, the InSb-10%C anode demonstrates good compatibility with conventional halogen-free salt ether-based electrolytes in the full battery configuration.

Non-Fluorinated Ethers to Mitigate Electrode Surface Reactivity in High-Voltage NCM811-Li Batteries.

Lithium (Li) metal batteries (LMBs) with nickel (Ni)-rich layered oxide cathodes exhibit twice the energy density of conventional Li-ion batteries. However, their lifespan is limited by severe side reactions caused by high electrode reactivity. Fluorinated solvent-based electrolytes can address this challenge, but they pose environmental and biological hazards. This work reports on the molecular engineering of fluorine (F)-free ethers to mitigate electrode surface reactivity in high-voltage Ni-rich LMBs. By merely extending the alkyl chains of traditional ethers, we effectively reduce the catalytic reactivity of the cathode towards the electrolyte at high voltages, which suppresses the oxidation decomposition of the electrolyte, microstructural defects and rock-salt phase formation in the cathode, and gas release issues. The high-voltage Ni-rich NCM811-Li battery delivers capacity retention of 80 % after 250 cycles with a high Coulombic efficiency of 99.85 %, even superior to that in carbonate electrolytes. Additionally, this strategy facilitates passivation of the Li anode by forming a robust solid-electrolyte interphase, boosting the Li reversibility to 99.11 % with a cycling life of 350 cycles, which outperforms conventional F-free ether electrolytes. Consequently, the lifespan of practical LMBs has been prolonged by over 100 % and 500 % compared to those in conventional carbonate- and ether-based electrolytes, respectively.

Empowering the Potassium-Sulfur Battery with Commendable Reaction Kinetics and Capacity Output by Localized High-Concentration Electrolytes.

Potassium-sulfur (K-S) batteries are one of the promising high-energy-density candidates beyond current lithium-ion batteries. Nevertheless, in practice, the utilization of K-S batteries is largely hindered due to the dissolution and shuttle effect of the cathode redox intermediates and the scarcity of an effective anode protection layer in conventional electrolytes. Herein, electrolyte engineering is applied to formulate an ether-based localized high-concentration electrolyte (LHCE) for the first time in a K-S cell with the mitigated parasitic effect of polysulfide dissolution and shuttle and the tuned anode-electrolyte interface property. A nonsolvating and polysulfide-stable fluoroether is sieved as a cosolvent in such an LHCE, which possesses the ultralow polysulfides solubility due to less roaming solvents and thus alleviates the polysulfides shuttle effect. The anion-derived solid electrolyte interphase enriched in inorganic components is constructed due to the strengthened cation-anion interplay in the primary solvation sheath and highlighted with accelerated interfacial kinetics in a K-S cell. It is validated that the proposed LHCE unlocks the theoretical capacity of the K-S cell based on the conversion between S and K2S3. It is further revealed that the lifespan is limited to the anode corrosion with severe cosolvent degradation caused by limited solvating solvent compatibility with metallic K, and the inevitable byproduct accumulation at the S cathode. The K-S cell based on the designed LHCE could achieve a prolonged lifespan with a reversible capacity of 448 mA h/gs after 80 cycles with an elaborate cathode design. This work shines a light on the electrolyte design perspective for full utilization and an in-depth mechanistic understanding of high-energy-density K-S batteries.

Restructuring Electrolyte Solvation by a Partially and Weakly Solvating Cosolvent toward High-Performance Potassium-Ion Batteries.

Ether-based electrolytes are among the most important electrolytes for potassium-ion batteries (PIBs) due to their low polarization voltage and notable compatibility with potassium metal. However, their development is hindered by the strong binding between K+ and ether solvents, leading to [K+-solvent] cointercalation on graphite anodes. Herein, we propose a partially and weakly solvating electrolyte (PWSE) wherein the local solvation environment of the conventional 1,2-dimethoxyethane (DME)-based electrolyte is efficiently reconfigured by a partially and weakly solvating diethoxy methane (DEM) cosolvent. For the PWSE in particular, DEM partially participates in the solvation shell and weakens the chelation between K+ and DME, facilitating desolvation and suppressing cointercalation behavior. Notably, the solvation structure of the DME-based electrolyte is transformed into a more cation-anion-cluster-dominated structure, consequently promoting thin and stable solid-electrolyte interphase (SEI) generation. Benefiting from optimized solvation and SEI generation, the PWSE enables a graphite electrode with reversible K+ (de)intercalation (for over 1000 cycles) and K with reversible plating/stripping (the K||Cu cell with an average Coulombic efficiency of 98.72% over 400 cycles) and dendrite-free properties (the K||K cell operates over 1800 h). We demonstrate that rational PWSE design provides an approach to tailoring electrolytes toward stable PIBs.

Chloro-Functionalized Ether-Based Electrolyte for High-Voltage and Stable Potassium-Ion Batteries.

Ether-based electrolyte is beneficial to obtaining good low-temperature performance and high ionic conductivity in potassium ion batteries. However, the dilute ether-based electrolytes usually result in ion-solvent co-intercalation of graphite, poor cycling stability, and hard to withstand high voltage cathodes above 4.0 V. To address the aforementioned issues, an electron-withdrawing group (chloro-substitution) was introduced to regulate the solid-electrolyte interphase (SEI) and enhance the oxidative stability of ether-based electrolytes. The dilute (~0.91 M) chloro-functionalized ether-based electrolyte not only facilitates the formation of homogeneous dual halides-based SEI, but also effectively suppress aluminum corrosion at high voltage. Using this functionalized electrolyte, the K||graphite cell exhibits a stability of 700 cycles, the K||Prussian blue (PB) cell (4.3 V) delivers a stability of 500 cycles, and the PB||graphite full-cell reveals a long stability of 6000 cycles with a high average Coulombic efficiency of 99.98 %. Additionally, the PB||graphite full-cell can operate under a wide temperature range from -5 °C to 45 °C. This work highlights the positive impact of electrolyte functionalization on the electrochemical performance, providing a bright future of ether-based electrolytes application for long-lasting, wide-temperature, and high Coulombic efficiency PIBs and beyond.

Electrolyte solvent composition regulating endows CoSe2 hollow nanocage anode with stable potassium ion storage

Metal selenides are ideal anode materials for potassium-ion batteries (PIBs) due to their significant merits of favorable conductivity and ion transport property. However, the inevitable volume changes of metal selenides electrode during potassiation/depotassiation processes result in the fracture and reconstruction of the solid electrolyte interphase (SEI) layer, causing capacity decay and significantly limiting their practical applications. Reasonable morphology control accompanied by uniform and rigid SEI layer formation are key factors in improving the electrochemical cycling stability of metal selenides. In this paper, nano-hollow CoSe2 (CoSe2@CNC) anode materials are prepared using ZIF-67 as the precursor. The differences of electrochemical performances for CoSe2@CNC anode material in ester-based and ether-based electrolytes have been investigated in detail. Results demonstrate that the SEI layer formed in the ester-based electrolyte is loose and thick, leading to electrode pulverization and material detachment after several cycles, resulting in rapid degradation of cycle performance. In contrast, a thin and inorganic-rich SEI layer containing more inorganic components is formed in the ether-based electrolyte, effectively protecting the electrode from damage, facilitating electronic transfer at the electrode electrolyte interphase, and optimizing potassium ions storage performance.

Biomimetic-Mineralization-Assisted Self-Activation Creates a Delicate Porous Structure in Carbon Material for High-Rate Sodium Storage.

Porous carbons have shown their potential in sodium-ion batteries (SIBs), but the undesirable initial Coulombic efficiency (ICE) and rate capability hinder their practical application. Herein, learning from nature, we report an efficient method for fabricating a carbon framework (CK) with delicate porous structural regulation by biomimetic mineralization-assisted self-activation. The abundant pores and defects of the CK anode can improve the ICE and rate performance of SIBs in ether-based electrolytes, whereas they are confined in carbonate ester-based electrolytes. Notably, ether-based electrolytes enable CK anode to possess excellent ICE (82.9%) and high-rate capability (111.2 mAh g-1 at 50 A g-1). Even after 5500 cycles at a large current density of 10 A g-1, the capacity retention can still be maintained at 73.1%. More importantly, the full cell consisting of the CK anode and Na3V2(PO4)3 cathode delivers a high energy density of 204.4 Wh kg-1, with a power density of 2828.2 W kg-1. Such outstanding performance of the CK anode is attributed to (1) hierarchical pores, oxygen doping, and defects that pave the way for the transportation and storage of Na+, further enhancing ICE; (2) a high-proportion NaF-based solid-electrolyte-interphase (SEI) layer that facilitates Na+ storage kinetics in ether-based electrolytes; and (3) ether-based electrolytes that determine Na+ storage kinetics further to dominate the performance of SIBs. These results provide compelling evidence for the promising potential of our synthetic strategy in the development of carbon-based materials and ether-based electrolytes for electrochemical energy storage.

Sulfur vacancies and heterogeneous interfaces promote high performance sodium storage of bimetallic chalcogenide hollow nanospheres

Transition metal sulfides have high theoretical capacities and are considered as potential anode materials for sodium-ion batteries. However, due to low inherent conductivity and significant volume expansion, the electrochemical performance is greatly limited. In this study, a nickel/manganese sulfide material (Ni0.96Sx/MnSy-NC) with adjustable sulfur vacancies and heterogeneous hollow spheres was prepared using a simple method. The introduction of a concentration-adjustable sulfur vacancy enables the generation of a heterogeneous interface between bimetallic sulfide and sulfur vacancies. This interface collectively creates an internal electric field, improving the mobility of electrons and ions, increasing the number of electrochemically active sites, and further optimizing the performance of Na+ storage. The direction of electron flow is confirmed by Density functional theory (DFT) calculations. The hollow nano-spherical material provides a buffer for expansion, facilitating rapid transfer kinetics. Our innovative discovery involves the interaction between the ether-based electrolyte and copper foil, leading to the formation of Cu9S5, which grafts the active material and copper current collector, reinforcing mechanical supporting. This results in a new heterostructure of Cu9S5 with Ni0.96Sx/MnSy, contributing to the stabilization of structural integrity for long-cycle performance. Therefore, Ni0.96Sx/MnSy-NC exhibits excellent electrochemical properties following our modification route. Regarding stability performance, Ni0.96Sx/MnSy-NC demonstrates an average decay rate of 0.00944% after 10,000 cycles at an extremely high current density of 10000 mA g−1. A full cell with a high capacity of 304.2 mA h g−1 was also successfully assembled by using Na3V2(PO4)3/C as the cathode. This study explores a novel strategy for interface/vacancy co-modification in the fabrication of high-performance sodium-ion batteries electrode.

Hybrid-Electrolytes System Established by Dual Super-lyophobic Membrane Enabling High-Voltage Aqueous Lithium Metal Batteries.

Aqueous electrolytes and related aqueous rechargeable batteries own unique advantage on safety and environmental friendliness, but coupling high energy density Li-metal batteries with aqueous electrolyte still represent challenging and not yet reported. Here, this work makes a breakthrough in "high-voltage aqueous Li-metal batteries" (HVALMBs) by adopting a brilliant hybrid-electrolytes strategy. Concentrated ternary-salts ether-based electrolyte (CTE) acts as the anolyte to ensure the stability and reversibility of Li-metal plating/stripping. Eco-friendly water-in-salt (WiS) electrolyte acts as catholyte to support the healthy operation of high-voltage cathodes. Most importantly, the aqueous catholyte and non-aqueous anolyte are isolated in each independent chamber without any crosstalk. Aqueous catholyte permeation toward Li anode can be completely prohibited without proton-induced corrosion, which is enabled by the introduction of under-liquid dual super-lyophobic membrane-based separator, which can realize the segregation of the most effective immiscible electrolytes with a surface tension difference as small as 6 mJ m-2. As a result, the aqueous electrolyte can be successfully coupled with Li-metal anode and achieve the fabrication of HVALMBs (hybrid-electrolytes system), which presents long-term cycle stability with a capacity retention of 81.0% after 300 cycles (LiNi0.8Mn0.1Co0.1O2 || Li (limited) cell) and high energy density (682Whkg-1).

Behavior of NO3−-Based Electrolyte Additive in Lithium Metal Batteries

While lithium metal is highly desired as a next-generation battery material due to its theoretically highest capacity and lowest electrode potential, its practical application has been impeded by stability issues such as dendrite formation and short cycle life. Ongoing research aims to enhance the stability of lithium metal batteries for commercialization. Among the studies, research on N-based electrolyte additives, which can stabilize the solid electrolyte interface (SEI) layer and provide stability to the lithium metal surface, holds great promise. The NO3− anion in the N-based electrolyte additive causes the SEI layer on the lithium metal surface to contain compounds such as Li3N and Li2O, which not only facilitates the conduction of Li+ ions in the SEI layer but also increases its mechanical strength. However, due to challenges with the solubility of N-based electrolyte additives in carbonate-based electrolytes, extensive research has been conducted on electrolytes based on ethers. Nonetheless, the low oxidative stability of ether-based electrolytes hinders their practical application. Hence, a strategy is needed to incorporate N-based electrolyte additives into carbonate-based electrolytes. In this review, we address the challenges of lithium metal batteries and propose practical approaches for the application and development of N-based electrolyte additives.

Ether-Based High-Voltage Lithium Metal Batteries: The Road to Commercialization.

Ether-based high-voltage lithium metal batteries (HV-LMBs) are drawing growing interest due to their high compatibility with the Li metal anode. However, the commercialization of ether-based HV-LMBs still faces many challenges, including short cycle life, limited safety, and complex failure mechanisms. In this Review, we discuss recent progress achieved in ether-based electrolytes for HV-LMBs and propose a systematic design principle for the electrolyte based on three important parameters: electrochemical performance, safety, and industrial scalability. Finally, we summarize the challenges for the commercial application of ether-based HV-LMBs and suggest a roadmap for future development.

Deciphering the Performance Enhancement, Cell Failure Mechanism, and Amelioration Strategy of Sodium Storage in Metal Chalcogenides-Based Andes.

Transition metal chalcogenides (TMCs) emerge as promising anode materials for sodium-ion batteries (SIBs), heralding a new era of energy storage solutions. Despite their potential, the mechanisms underlying their performance enhancement and susceptibility to failure in ether-based electrolytes remain elusive. This study delves into these aspects, employing CoS2 electrodes as a case in point to elucidate the phenomena. The investigation reveals that CoS2 undergoes a unique irreversible and progressive solid-liquid-solid phase transition from its native state to sodium polysulfides (NaPSs), and ultimately to a Cu1.8S/Co composite, accompanied by a gradual morphological transformation from microspheres to a stable 3D porous architecture. This reconstructed 3D porous structure is pivotal for its exceptional Na+ diffusion kinetics and resilience to cycling-induced stress, being the main reason for ultrastable cycling and ultrahigh rate capability. Nonetheless, the CoS2 electrode suffers from an inevitable cycle life termination due to the microshort-circuit induced by Na metal corrosion and separator degradation. Through a comparative analysis of various TMCs, a predictive framework linking electrode longevity is established to electrode potential and Gibbs free energy. Finally, the cell failure issue is significantly mitigated at a material level (graphene encapsulation) and cell level (polypropylene membrane incorporation) by alleviating the NaPSs shuttling and microshort-circuit.

Strongly solvating triglyme-based electrolyte realizes stable lithium metal batteries at high-voltage and high-temperature

The electrolyte in lithium-metal batteries (LMBs) plays a pivotal role in stabilizing the surface of the lithium metal anode (LMA) and high-voltage cathode. However, currently widely studied ether-based electrolytes, although it has good compatibility with LMA due to their lower reactivity, are facing significant challenges related to poor oxidation resistance and cathode/electrolyte interface (CEI) instability when combined with the high-voltage cathode, particularly at elevated temperatures. Therefore, there is an urgent need to design advanced electrolytes capable of maintaining high stability under high-voltage and high-temperature conditions. Here, we have developed an ultra-stable localized high-concentration electrolyte (LHCE) by introducing triethylene glycol dimethyl ether (TG), which exhibits strong solvation ability. Computational and experimental results demonstrate that the designed TG-based dilute high-concentration electrolyte (TG-DHCE) possesses a stable solvation structure, high oxidation resistance, and thermal stability, making it ideal for LMBs. Furthermore, the unique solvation structure of TG-DHCE promotes the preferential decomposition of anions while facilitating the formation of stable, inorganic-rich electrode/electrolyte interfaces on the anode and cathode. Consequently, equipped with TG-DHCE, Li||Li cells (more than 1600 h) and Li||NCM523 cells (80.6%, 250 cycles) show superior stability and also demonstrate remarkable performance even at elevated temperatures (60 °C). Additionally, under the harsh conditions of ultrahigh loading NCM523 cathode (19.7 mg/cm2) and limited Li reservoir (twice excess Li was deposited on Cu, Li@Cu) (N/P = 2), Li@Cu||NCM523 cells still maintain stable operation. This work pioneers a new path by choosing strongly solvating solvents, effectively enhancing the cycle life of LMBs under high-voltage and high-temperature conditions.

Electrolyte-Induced Morphology Evolution to Boost Potassium Storage Performance of Perylene-3,4,9,10-tetracarboxylic Dianhydride.

Organic materials have attracted extensive attention for potassium-ion batteries due to their flexible structure designability and environmental friendliness. However, organic materials generally suffer from unavoidable dissolution in aprotic electrolytes, causing an unsatisfactory electrochemical performance. Herein, we designed a weakly solvating electrolyte to boost the potassium storage performance of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). The electrolyte induces an in situ morphology evolution and achieves a nanowire structure. The weakly dissolving capability of ethylene glycol diethyl ether-based electrolyte and unique nanowire structure effectively avoid the dissolution of PTCDA. As a result, PTCDA shows excellent cycling stability (a capacity retention of 89.1% after 2000 cycles) and good rate performance (70.3 mAh g-1 at 50C). In addition, experimental detail discloses that the sulfonyl group plays a key role in inducing morphology evolution during the charge/discharge process. This work opens up new opportunities in electrolyte design for organic electrodes and illuminates further developments of potassium-ion batteries.