Ethylene Concentration Research Articles

Endophytic Pseudomonas fluorescens relieves intraspecific allelopathy of Atractylodes lancea by reducing ethylene transportation

BackgroundEndophytes play an important role in promoting plant growth. To date, although many reports provided insight into the function of endophytes in their hosts, few reports focus on their impact on nearby plants. Intraspecific allelopathy in plant community is common and presents a notable challenge to medicinal plant yield and productivity. Atractylodes lancea is a perennial herb that has relatively low yields due to intraspecific allelopathy. The bacterial endophyte Pseudomonas fluorescens ALEB7B has previously been found to increase essential oil content of A. lancea, but the role of ALEB7B in A. lancea allelopathy is still unknown.ResultsNoninoculated A. lancea exhibited growth retardation when it was grown in a community, which was related to ethylene-induced intraspecific allelopathy. Further experiment showed that exposing A. lancea to volatile from noninoculated A. lancea or same concentration of ethylene reduced growth of A. lancea. P. fluorescens-inoculated plants showed reduced ethylene emission and relieved growth retardation on neighboring noninoculated A. lancea. Moreover, P. fluorescens inoculation had little allelopathic effect when receivers were treated with ethylene receptor inhibitor or when emitters were treated with ethylene production inhibitor. Transcriptomic analysis revealed that endophyte ALEB7B altered transcriptional response associated with ethylene response and essential oil production in neighboring A. lancea.ConclusionsOur results demonstrated that the bacterial endophyte ALEB7B provides fitness benefits for both hosts and neighbors. The allelopathic effect on nearby plants can be alleviated by altering airborne signals, such as ethylene, in endophytic bacteria.

Surface Molding Hydrogel Film Initiated by ZIF-8 with Ethylene Adsorption Performance for Preserving Perishable Fruits.

The quality deterioration of postharvest fruits is greatly influenced by ethylene, leading to food wastage worldwide. Therefore, it is urgent to develop an efficient packaging strategy to reduce ethylene concentration and prolong the shelf life of perishable fruits. In this work, a surface-molding hydrogel film was created using ZIF-8 in combination with carboxymethyl starch (CMS) and carboxymethyl chitosan (CMCS). Specifically, ZIF-8 is first anchored on CMS and then rapidly cross-linked in situ with CMCS, forming ZIF-8@CC on the fruit surface (within 10 s). The perfect tight-fitting effects of ZIF-8@CC were observed on various fruit surfaces with different roughness (Ra: ranges from 102 to 308 nm). ZIF-8@CC could absorb 57.3% endogenous ethylene from bananas, and the interaction mechanism between ethylene and ZIF-8 was studied by molecular dynamics simulations, providing insights into the ethylene adsorption capacity of ZIF-8@CC. Moreover, ZIF-8@CC presented excellent antibacterial properties and achieved satisfactory ultralong preservation effects on both nonclimatic and climatic fruits (12 days for strawberries and 14 days for bananas) at room temperature. Importantly, ZIF-8@CC is easily removed, washed, and degradable. These findings offer an efficient and potential food packing material with multifunctional properties for preserving perishable fruits.

Time-dependent variations in desorbed gas composition: methodological analysis of asphaltite vein investigation results

In this study, a phenomenon that can have significant technical and economic impacts in the mining and unconventional gas production of hydrocarbon resources is discussed, change of gas composition during desorption period. The change is analyzed, related findings are obtained and engineering tools are forged. In this scope, a member of the Southeastern Turkey asphaltite’s gas content and composition character was examined. 12+1 samples were collected at equal intervals from an inclined drillhole that cut through the asphaltite vein. The United States Bureau of Mines (USBM) direct method was employed to determine the gas content. Gas composition analysis was performed on gas samples, which were collected four times throughout the desorption period. Residual gas composition is determined as well. During desorption period, methane and hydrogen ratios exhibited decreasing trends, while others have increasing trends. In evaluating of the collected data, the desorption order between gas compounds are revealed. Logarithmic trend functions are generated to estimate the concentrations of gas compounds at specific time points. With these functions and gas content measurement data, weighted average concentrations for gas compounds are determined. These concentration functions and the weighted average results are used to create engineering tools showing unit energy content of desorbed gas through desorption period both instantaneous and cumulative. Similarly, change in lower explosive limit and auto-ignition temperature during desoption period is shown. The weighted average gas concentrations obtained are used to interpret geological insights as they are the actual gas composition of the samples. In the study, gas content characteristic properties of Üçkardeşler asphaltite vein is comprehensively presented. Accordingly, the mean gas content, excluding one sample with a value of 2.78 m3/t at a location near a fault intersection, was found to be 1.66 m3/t. The average volumetric concentrations of methane, ethane, propane, and acetylene in the desorbed gas were determined as 61.6%, 24.5%, 10.7%, and 2.3%, respectively. The remaining part primarily consisted of heavier hydrocarbons, with low amounts of carbon dioxide and hydrogen.

Flexible Wearable Chemoresistive Ethylene Gas-Monitoring Device Utilizing Pd/Ti3C2Tx Nanocomposites for In Situ Nondestructive Monitoring of Kiwifruit Ripeness.

Kiwifruit, renowned for its antioxidant properties and nutritional richness, faces challenges in maintaining quality during transportation, often leading to suboptimal products reaching the market. To address this issue, a wireless transmission flexible ethylene monitoring device (WFEMD) was developed. This device comprises a flexible ethylene gas sensor and a signal transmission processing unit integrated with electronic components, enabling real-time monitoring capabilities. In this study, the catalytic activity of Pd and Pd/Ti heterojunctions was leveraged to enhance the ethylene gas sensing. The impact of Ti3C2Tx modified with varying masses of Pd nanoparticles on ethylene gas response levels was investigated. The signal transmission processing unit, fabricated by using the laser direct-writing method, was optimized to collect signals from the flexible ethylene gas sensor, convert them into corresponding ethylene concentrations, and transmit data via an antenna. By introducing a random forest (RF) classification algorithm, a remarkable 97.5% accuracy in predicting kiwifruit ripeness grades was achieved. The algorithm facilitated precise classification by collecting key parameters such as ethylene and CO2 during transportation. The WFEMD enables real-time acquisition of kiwifruit ethylene gas information, which is transmitted wirelessly for data visualization and traceability via mobile terminals. This empowers managers with timely insights into ethylene emissions and ripeness predictions, facilitating informed decision-making processes.

Dual‐mode sensing biopolymer membrane impregnated with molybdenum for ethylene detection and monitoring of fruits

AbstractIn this study, a dual‐mode sensing biopolymer membrane employing chitosan (CS), polyvinyl alcohol (PVA), and ammonium molybdate (AM) was developed for optical and electrochemical detection of ethylene. The biopolymer composite was characterized by X‐ray diffraction (XRD), Fourier transform infra‐red (FTIR), and scanning electron microscopy (SEM).The relationship between ethylene concentration and optical/electrochemical response was investigated. XRD analysis showed enhanced ionic conduction, supported by SEM images showing uniform pore distribution within the synthesized membrane, facilitating effective gas interaction with Molybdenum. The increased FTIR peak intensities with higher amount of molybdenum in the membrane indicates enhanced molecular interactions. Applied to a microelectrode chip, the membrane exhibits a measurable electrochemical response with oxidation peak appearing in cyclic voltammogram as Molybdenum ions undergo reduction upon ethylene exposure. Colorimetric measurements, based on CIELAB values, reveals visible color shift with increasing ethylene concentrations, particularly at 10% molybdenum impregnation. Ionic conductivity and total color difference exhibit parallel variation with ethylene concentrations. X‐ray photoelectron spectroscopy confirms molybdenum oxidation state shift from +6 to +5 in the membrane upon ethylene interaction. The inexpensive colorimetric method enables direct color change visualization in practical applications. The resulting dual‐functional biopolymer membrane shows adaptability and versatility by responding to both optical and electrochemical signals.

Nucleation mechanism of methane heterogeneous condensation under different driving forces

Clarifying alkane gas condensation characteristics is crucial to designing and optimizing liquefaction heat exchangers, which imposes higher demands on the microscopic understanding of alkane heterogeneous condensation. Thus, in this study, the condensation process of methane nucleation under different driving forces is investigated by molecular dynamics (MD) simulations. The dynamics characteristics of nucleation in methane heterogeneous condensation are analyzed by varying initial gas-phase pressure, cold wall temperature, and ethane content. The results showed that increasing the initial gas-phase pressure enhances intermolecular interactions, which alter the cluster formation path and significantly increase the methane gas nucleation rate from 1.997 × 1033/(m3·s) to 1.068 × 1034/(m3·s). While lowering the cold wall temperature promotes condensation by weakening the thermal motion of the gas molecules. Once condensation nuclei form in the system, the lower temperature conditions from lowering the cold wall temperature result in a higher growth rate of the clusters. Additionally, the addition of easily condensable component ethane can improve the condensation nucleation characteristics of low-saturated methane gas, facilitating the liquefaction of methane. This study aims to provide a microscopic understanding of the advancement of gas liquefaction technology by investigating the heterogeneous nucleation of alkane under different conditions from a microscopic perspective.

Characteristic Analysis and Health Risk Assessment of PM2.5 and VOCs in Tianjin Based on High-Resolution Online Data.

This study leveraged 2019 online data of particulate matter (PM2.5) and volatile organic compounds (VOCs) in Tianjin to analyze atmospheric pollution characteristics. PM2.5 was found to be primarily composed of water-soluble ions, with nitrates as the dominant component, while VOCs were predominantly alkanes, followed by alkenes and aromatic hydrocarbons, with notable concentrations of propane, ethane, ethylene, toluene, and benzene. The receptor model identified six major sources of PM2.5 and seven major sources of VOCs. The secondary source is the main contribution source, while motor vehicles and coal burning are important primary contribution sources in PM2.5. And, industrial processes and natural gas volatilization were considered major contributors for VOCs. A health risk assessment indicated negligible non-carcinogenic risks but potential carcinogenic risks from trace metals As and Cr, and benzene within VOCs, underscoring the necessity for focused public health measures. A risk attribution analysis attributed As and Cr in PM to coal combustion and vehicular emissions. Benzene in VOCs primarily originates from fuel evaporation, and industrial and vehicular emissions. These findings underscore the potential for reducing health risks from PM and VOCs through enhanced regulation of emissions in coal, industry, and transportation. Such strategies are vital for advancing air quality management and safeguarding public health.

Sensitivity Analysis of Atmospheric Ozone and Source Apportionment of Volatile Organic Compounds in Yinchuan City

Based on the observation data of O3 concentration in Yinchuan in 2022, the monthly variation characteristics of O3 concentrations were analyzed. Further, based on the observation data of meteorological elements, conventional pollutants, and volatile organic compounds （VOCs） concentrations at an urban site in Yinchuan from May to July, the difference in meteorological elements and precursor concentrations between the polluted days and the non-polluted days were compared. Then, the O3 sensitivity and the VOCs sources were discussed using the Framework for 0-D Atmospheric Modeling （F0AM） and positive matrix factorization （PMF） model, respectively. The results showed that： ① The O3 pollution occurred from May to July in 2022, and the concentrations of O3-8h-90per were 156 μg·m-3, 170 μg·m-3, and 174 μg·m-3, respectively, with exceeding standard rates of 9.7%, 26.7%, and 29.0%, respectively. ② Compared with those on the non-polluted days, the hourly mean values of temperature, total solar radiation, and concentrations of various precursors on the O3-polluted days increased, including the volume concentrations of propane, isobutane, ethane, n-butane, and dichloromethane, which increased significantly by 33.1%, 29.1%, 25.0%, 22.7%, and 21.3%, respectively. The results showed that the combined increase in pollutant emissions and adverse meteorological conditions contributed to the formation of O3. ③ From May to July 2022, the top five VOCs species in terms of ozone formation potential （OFP） value on whole, non-polluted, and polluted days were the same. They were acetaldehyde, m/p-xylene, ethylene, isoprene, and toluene, mainly from solvent use sources, natural sources, and chemical industry emissions. ④ The local O3 production was mostly controlled by VOCs, and the relative incremental reactivity （RIR） results revealed that O3 production showed strong positive sensitivity to alkene and aromatic hydrocarbon but showed negative sensitivity to NOx on both polluted and non-polluted days. The relative contributions of active species such as acetone, ethylene, and isobutane to O3 production were high, and the implementation of an emission reduction scheme with the ratio of VOCs to NOx emission reduction much greater than 1 could effectively reduce the local O3 concentration. ⑤ The main sources of atmospheric VOCs in Yinchuan were motor vehicle emission sources （32.3%）, process sources （20.7%）, combustion sources （19.2%）, solvent use sources （12.7%）, gasoline volatile sources （9.1%）, and natural sources （6%）, and the contribution rate of motor vehicle emission sources on polluted days increased by 4.6% compared with that on non-polluted days, indicating that the motor vehicle emission source was an important object of summer VOCs control in Yinchuan.

The generation mechanism of deep natural gas in Tabei uplift, Tarim Basin, Northwest China: insights from instantaneous and accumulative effects

The natural gas heavy carbon isotope and high dryness coefficients genesis in Tabei uplift, Tarim Basin has been highly controversial. To investigate the generation mechanisms of natural gas in the Tabei Uplift. Natural gas chemical composition, carbon isotopes were used to analyze the genesis of natural gas, source rock maturity, and basin modeling were conducted to reconstruct the natural gas generation process, and the influences of instantaneous and cumulative effects on natural gas properties was discussed. The results show that the dryness coefficients of natural gas range from 0.62 to 0.99 (average: 0.92), the methane contents range from 30.42% to 96.4% (average: 85.10%), ethane contents from 0.43% to 15.58% (average: 3.39%), propane contents from 0.11% to 11.43% (average: 1.78%), and the methane carbon isotopes range from −47.30‰ to −33.80‰ (average: −36.96‰), ethane carbon isotopes range from −39.60‰ to −33.20‰ (average: −35.57‰), propane carbon isotopes range from −36.90‰ to −28.50‰ (average: −35.49‰). Compared with the actual regional thermal evolution of the source rock (Ro% range from 1.4%∼1.7%), the natural gas exhibits excessively high dryness coefficients and heavy methane carbon isotope characteristics. The natural gas is primary cracking gas and sourced from marine type II kerogen. The dryness coefficient, methane carbon isotopes, and source rock maturity gradually increases from the west to the east. Instantaneous effects and leakage led to the dry gas and relative heavy methane carbon isotopes generated at a low maturity level. The current natural gas in the Ordovician reservoirs was all generated during the Himalayan orogeny. Long period pause of the gas generation between the two hydrocarbon generation phases is the main cause for the instantaneous effects.

Revising VOC emissions speciation improves the simulation of global background ethane and propane.

Non-Methane Volatile Organic Compounds (NMVOCs) generate ozone (O3) when they are oxidized in the presence of oxides of nitrogen, modulate the oxidative capacity of the atmosphere and can lead to the formation of aerosol. Here, we assess the capability of a chemical transport model (GEOS-Chem) to simulate NMVOC concentrations by comparing ethane, propane and higher alkane observations in remote regions from the NOAA Flask Network and the World Meteorological Organization's Global Atmosphere Watch (GAW) network. Using the Community Emissions Data System (CEDS) inventory we find a significant underestimate in the simulated concentration of both ethane (35%) and propane (64%), consistent with previous studies. We run a new simulation where the total mass of anthropogenic NMVOC emitted in a grid box is the same as that used in CEDS, but with the NMVOC speciation derived from regional inventories. For US emissions we use the National Emissions Inventory (NEI), for Europe we use the UK National Atmospheric Emissions Inventory (NAEI), and for China, the Multi-resolution Emission Inventory for China (MEIC). These changes lead to a large increase in the modelled concentrations of ethane, improving the mean model bias from -35% to -4%. Simulated propane also improves (from -64% to -48% mean model bias), but there remains a substantial model underestimate. There were relatively minor changes to other NMVOCs. The low bias in simulated global ethane concentration is essentially removed, resolving one long-term issue in global simulations. Propane concentrations are improved but remain significantly underestimated, suggesting the potential for a missing global propane source. The change in the NMVOC emission speciation results in only minor changes in tropospheric O3 and OH concentrations.

Kinetic modeling of the effect of the conditions of conjugate oxidation of propane and ethylene on the yield of propylene

The study of the oxidation of propane-ethylene mixtures by numerical kinetic modeling allowed us to establish that in the range of 400–600 oC with an increase in the conversion of propane with an increase in temperature, the selectivity of propylene formation passes through a maximum, the position of which depends on the concentration of ethylene in the initial mixture. The addition of ethylene to the initial mixture leads to a reduction in propane consumption and an increase in the selectivity of propylene formation. The conditions under which ethylene introduced into the initial mixture is not consumed during the process are determined, so formally it can be considered as a catalyst, and the process of propane oxidation as proceeding in a pseudo-catalytic regime.

Surface properties of the seas of Titan as revealed by Cassini mission bistatic radar experiments

Saturn’s moon Titan was explored by the Cassini spacecraft from 2004 to 2017. While Cassini revealed a lot about this Earth-like world, its radar observations could only provide limited information about Titan’s liquid hydrocarbons seas Kraken, Ligeia and Punga Mare. Here, we show the results of the analysis of the Cassini mission bistatic radar experiments data of Titan’s polar seas. The dual-polarized nature of bistatic radar observations allow independent estimates of effective relative dielectric constant and small-scale roughness of sea surface, which were not possible via monostatic radar data. We find statistically significant variations in effective dielectric constant (i.e., liquid composition), consistent with a latitudinal dependence in the methane-ethane mixing-ratio. The results on estuaries suggest lower values than the open seas, compatible with methane-rich rivers entering seas with higher ethane content. We estimate small-scale roughness of a few millimeters from the almost purely coherent scattering from the sea surface, hinting at the presence of capillary waves. This roughness is concentrated near estuaries and inter-basin straits, perhaps indicating active tidal currents.

An Innovative Prototype to Measure Carbon Dioxide, Ethylene, and Nitric and Nitrous Oxides in the Soil Air

ABSTRACT Agricultural intensification has increased the consumption of inputs, mainly fertilizers, which may increase emissions of greenhouse gases (GHG). The improvement of our knowledge on GHG dynamics in the soil is mandatory to optimize the use of fertilizers and reduce environmental impacts. We developed an electronic sensor prototype based on Arduino to monitor concentrations of carbon dioxide (CO2), ethylene (C2H4), ammonia (NH3), and nitrogen oxides (N2O/NOx) in the soil air in a greenhouse experiment with soybean (Glycine max L.) under two treatments: single inoculation (Bradyrhizobium spp.) or triple co-inoculation (Bradyrhizobium spp. Azospirillum brasilense and Pseudomonas fluorescens) in a completely randomized design. One-way analysis of variance, as well as correlation between plant traits at 35 days of emergence and the average daily concentration of gases in the soil air were performed. Although not affecting plant growth or yield-related traits, co-inoculation increased CO2, while decreased NOx concentrations compared with single inoculation, whereas C2H4 emission changed with the plant growth stage. Although co-inoculation increased respiration, decreased N losses by denitrification, mitigating the total emissions of GHG. The prototype showed to be efficient for monitoring GHG across the experiment at a low cost and easy use, contributing for monitoring GHG concentrations in the soil air.

High expression of ethylene response factor BcERF98 delays the flowering time of non-heading Chinese cabbage.

BcERF98 is induced by ethylene signaling and inhibits the expression of BcFT by interacting with BcNF-YA2 and BcEIP9, thereby inhibiting plant flowering. Several stresses trigger the accumulation of ethylene, which then transmits the signal to ethylene response factors (ERFs) to participate in the regulation of plant development to adapt to the environment. This study clarifies the function of BcERF98, a homolog of AtERF98, in the regulation of plant flowering time mediated by high concentrations of ethylene. Results indicate that BcERF98 is a nuclear and the cell membrane-localized transcription factor and highly responsive to ethylene signaling. BcERF98 inhibits the expression of BcFT by interacting with BcEIP9 and BcNF-YA2, which are related to flowering time regulation, thereby participating in ethylene-mediated plant late flowering regulation. The results have enriched the theoretical knowledge of flowering regulation in non-heading Chinese cabbage (NHCC), providing the scientific basis and gene reserves for cultivating new varieties of NHCC with different flowering times.

Eco-Friendly Transformation of Bioethanol into Ethylene over Bimetallic Nickel-Copper Catalysts.

The conversion of bioethanol to ethylene in gas phase and atmospheric pressure was investigated over γ-Al2O3 supported copper and nickel catalysts. These catalysts were prepared by co-precipitation and pre-treated with hydrogen at 450 °C. Six catalysts were studied at 450 °C under a nitrogen atmosphere. It was found that the monometallic Cu/γ-Al2O3 catalyst exhibited the highest ethylene concentration, with a selectivity of around 90 %. The bioethanol conversion obtained was between 57 %-86 %. Another catalyst that exhibited high concentration values was the NiCu1 : 7 bimetallic catalyst. The catalysts were characterised using XRD, SEM, EDS, TEM, TGA, FTIR, Raman, and N2-physisoption techniques. Furthermore, the Cu/γ-Al2O3 catalyst was studied under different reduction temperatures and gas flow conditions. It was found that the catalysts reduced at 350 °C and 35 ml/min N2 flow presented ethylene concentrations between (0.18-0.21) g/L. Moreover, the catalyst deactivation was identified to be first order and the equation of the Cu/γ-Al2O3 catalyst deactivation model was determined. Carbonaceous deposits over the used sample were not detected by Raman and FTIR. It was determined that the Cu/γ-Al2O3 catalyst deactivation could be mainly attributed to the blocking of the catalytic sites by strongly adsorbed compounds and hydroxylation of the catalyst surface.

Thermal Formation of Metathesis-Active Tungsten Alkylidene Complexes from Cyclohexene.

A 7-tungstabicyclo[4.3.0]nonane complex forms slowly upon addition of cyclohexene to the ethylene complex, W(NAr)(OSiPh3)2(C2H4), at 22 °C. A single-crystal X-ray study showed its structure to be closest to a square pyramid (τ = 0.23). At 22 °C, loss of cyclohexene or ring contraction of the 7-tungstabicyclo[4.3.0]nonane complex is slow. Above ∼80 °C, cyclohexene is ejected to give W(NAr)(OSiPh3)2(C2H4), but a sufficient amount of 7-tungstabicyclo[4.3.0]nonane complex remains in the presence of cyclohexene and the ring contracts to yield methylenecyclohexane and a methylidene complex or ethylene and a cyclohexylidene complex. Other complexes that have been observed include an 8-tungstabicyclo[4.3.0]nonane complex formed from 1,7-octadiene, a 7-tungstabicyclo[4.2.0]octane complex (formed from a methylidene complex and cyclohexene), and a methylenecyclohexane complex. 13C-Labeling studies show that the exo-methylene group in methylenecyclohexane and the α positions in the 8-tungstabicyclo[4.3.0]nonane come from ethylene. An alternative ring contraction of a tungstacyclopentane made from two molecules of cyclohexene cannot be excluded when concentrations of ethylene are low. A cyclohexylidene complex could also form from two cyclohexenes via a newly proposed "alkyl/allyl" mechanism. The results reported here are the first experimental confirmations that a tungstacyclopentane can ring-contract thermally at a substituted WCα position to form a tungstacyclobutane and therefore metathesis-active alkylidenes.

Hexa-Fe(III) Carboxylate Complexes Facilitate Aerobic Hydrocarbon Oxidative Functionalization: Rh Catalyzed Oxidative Coupling of Benzene and Ethylene to Form Styrene.

Fe(II) carboxylates react with dioxygen and carboxylic acid to form Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 (X = acetate or pivalate), which is an active oxidant for Rh-catalyzed arene alkenylation. Heating (150-200 °C) the catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2 with ethylene, benzene, Fe(II) carboxylate, and dioxygen yields styrene >30-fold faster than the reaction with dioxygen in the absence of the Fe(II) carboxylate additive. It is also demonstrated that Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 is an active oxidant under anaerobic conditions, and the reduced material can be reoxidized to Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 by dioxygen. At optimized conditions, a turnover frequency of ∼0.2 s-1 is achieved. Unlike analogous reactions with Cu(II) carboxylate oxidants, which undergo stoichiometric Cu(II)-mediated production of phenyl esters (e.g., phenyl acetate) as side products at temperatures ≥150 °C, no phenyl ester side product is observed when Fe carboxylate additives are used. Kinetic isotope effect experiments using C6H6 and C6D6 give k H/k D = 3.5(3), while the use of protio or monodeutero pivalic acid reveals a small KIE with k H/k D = 1.19(2). First-order dependencies on Fe(II) carboxylate and dioxygen concentration are observed in addition to complicated kinetic dependencies on the concentration of carboxylic acid and ethylene, both of which inhibit the reaction rate at a high concentration. Mechanistic studies are consistent with irreversible benzene C-H activation, ethylene insertion into the formed Rh-Ph bond, β-hydride elimination, and reaction of Rh-H with Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 to regenerate a Rh-carboxylate complex.

Coupling Nitrate-Dependent Anaerobic Ethane Degradation with Anaerobic Ammonium Oxidation.

The microbial oxidation of short-chain gaseous alkanes (SCGAs, consisting of ethane, propane, and butane) serves as an efficient sink to mitigate these gases' emission to the atmosphere, thus reducing their negative impacts on air quality and climate. "Candidatus Alkanivorans nitratireducens" are recently found to mediate nitrate-dependent anaerobic ethane oxidation (n-DAEO). In natural ecosystems, anaerobic ammonium-oxidizing (anammox) bacteria may consume nitrite generated from nitrate reduction by "Ca. A. nitratireducens", thereby alleviating the inhibition caused by nitrite accumulation on the metabolism of "Ca. A. nitratireducens". Here, we demonstrate the coupling of n-DAEO with anammox in a laboratory-scale model system to prevent nitrite accumulation. Our results suggest that a high concentration of ethane (6.9-7.9%) has acute inhibition on anammox activities, thus making the coupling process a significant challenge. By maintaining ethane concentrations within the range of 1.7-5.5%, stable ethane and ammonium oxidation, nitrate reduction, and dinitrogen gas generation without nitrite accumulation were finally achieved. After the accomplished coupling of n-DAEO with anammox, nitrate reduction rates increased by 8.1 times compared to the rate observed with n-DAEO alone. Microbial community profiling via 16S rRNA gene amplicon sequencing showed "Ca. A. nitratireducens" (6.6-12.9%) and anammox bacteria "Candidatus Kuenenia" (3.4-5.6%) were both dominant in the system, indicating they potentially form a syntrophic partnership to jointly contribute to nitrogen removal. Our findings offer insights into the cross-feeding interaction between "Ca. A. nitratireducens" and anammox bacteria in anoxic environments.

Ethylene Elimination Using Activated Carbons Obtained from Baru (Dipteryx alata vog.) Waste and Impregnated with Copper Oxide.

Ethylene is a plant hormone regulator that stimulates chlorophyll loss and promotes softening and aging, resulting in a deterioration and reduction in the post-harvest life of fruit. Commercial activated carbons have been used as ethylene scavengers during the storage and transportation of a great variety of agricultural commodities. In this work, the effect of the incorporation of copper oxide over activated carbons obtained from baru waste was assessed. Samples were characterized by X-ray diffraction (XRD), N2 adsorption-desorption at -196 °C, field-emission scanning electron microscopy (FESEM) coupled with energy-dispersive X-ray spectroscopy (EDS), and infrared (IR) spectroscopy. The results showed that the amount of ethylene removed using activated carbon obtained from baru waste and impregnated with copper oxide (1667 μg g-1) was significantly increased in comparison to the raw activated carbon (1111 μg g-1). In addition, carbon impregnated with copper oxide exhibited better adsorption performance at a low ethylene concentration. Activated carbons produced from baru waste are promising candidates to be used as adsorbents in the elimination of ethylene during the storage and transportation of agricultural commodities at a lower cost.

High ethane content enables efficient CO2 capture from natural gas by cryogenic distillation

Cryogenic CO2 capture technique is superior to other CO2 capture methods in terms of potential environmental protection, because it uses no chemical solvent or membrane materials that need regular replacement. However, the freezing problem of CO2 makes it difficult to achieve CO2 capture through simple gas–liquid separation, and the existing cryogenic CO2 capture techniques often require a specially designed separation equipment. In addition, cryogenic CO2 capture is generally considered a method with high energy consumption due to the need for refrigeration. This study proposes a cryogenic distillation-based CO2 capture method for natural gas with high ethane content, such as shale gas and oilfield associated gas. This method utilizes the azeotropic characteristics of CO2 and ethane to avoid CO2 freeze-out and the energy consumption for CO2 capture is minimized through process integration with natural gas liquefaction and ethane recovery. The proposed system uses the propane precooled mixed refrigerant process to provide the required refrigeration, and it is simulated in Aspen HYSYS and optimized by a combined method of a genetic algorithm and sequential optimization. The results show that the proposed process can remove up to 17 mol% of CO2 to less than 50 ppm. With extractive distillation, 99.50 % of the ethane in the feed gas is recovered with a purity of 99.50 mol%. The optimal results corresponding to the maximum allowable CO2 content to avoid its freeze-out (with a solubility margin of 500 ppm) show that when ethane content is 2–20 mol%, the specific power consumption of the system is about 0.43 kWh/Nm3(NG) with an exergy efficiency higher than 50 %. The proposed process achieves energy-saving and efficient CO2 capture method for natural gas with high ethane content.