Aboveground Biomass Estimation Research Articles

Combining Sentinel-2 and diverse environmental data largely improved aboveground biomass estimation in China’s boreal forests

Combining Sentinel-2 and diverse environmental data largely improved aboveground biomass estimation in China’s boreal forests

Using UAV-based multispectral and RGB imagery to monitor above-ground biomass of oat-based diversified cropping

Timely access to crop above-ground biomass (AGB) information is crucial for estimating crop yields and managing water and fertilizer efficiently. Unmanned aerial vehicle (UAV) imagery offers promising avenues for AGB estimation due to its high efficiency and flexibility. However, the accuracy of these estimations can be influenced by various factors, including crop growth stages, the spectral resolution of UAV sensors, and flight altitudes. These factors need thorough investigation, especially in diversified cropping systems where crop diversity and growth stages interplay complexly, challenging the accuracy of AGB estimation. This study aims to estimate AGB of oats planted under different agricultural regimes—monoculture, crop rotation, and intercropping—at various growth stages (jointing, flowering, and grain-filling) and across all stages combined, using multispectral and RGB UAV images collected at different flight altitudes (25 m, 50 m, and 100 m). Three feature selection methods—maximal information coefficient (MIC), least absolute shrinkage and selection operator (LAS), and recursive feature elimination (RFE)—were tested. Four machine learning models—ridge regression (RR), multilayer perceptron (MLP), light gradient boosting machine (LGBM), and extreme gradient boosting (XGBoost)—were used for estimating AGB. Each feature selection method was combined with each machine learning model (e.g., MIC-RR, MIC-MLP, MIC-LGBM, MIC-XGBoost, LAS-RR) to evaluate their performance. Results revealed that the highest accuracy in AGB estimation was achieved with images acquired at a flight altitude of 25 m. The RFE-MLP model demonstrated superior results during the jointing stage (R² = 0.84, root mean squared error (RMSE) = 217.45 kg/ha, root mean squared logarithmic error (RMSLE) = 0.16, mean absolute percentage error (MAPE) = 4.15 %), the LAS-RR model excelled in the flowering stage (R² = 0.85, RMSE = 263.03 kg/ha, RMSLE = 0.05, MAPE = 14.44 %), and the RFE-XGBoost model was most effective during the grain-filling stage (R² = 0.68, RMSE = 865.03 kg/ha, RMSLE = 0.12, MAPE = 8.88 %). For cross-stage modelling, the RFE-MLP achieved remarkable results (R² = 0.93, RMSE = 680.44 kg/ha, RMSLE = 0.16, MAPE = 12.12 %). This study demonstrates the efficacy of combining feature selection methods with machine learning algorithms to enhance the accuracy of oat AGB estimations. The involvement of multiple cropping patterns enhances the generalizability of our findings, facilitating real-time and rapid monitoring of crop growth in future diversified cropping systems.

Leveraging SAR and Optical Remote Sensing for Enhanced Biomass Estimation in the Amazon with Random Forest and XGBoost Models

Abstract. This study addresses the challenge of estimating above-ground biomass (AGB) in the Amazon rainforest by developing a reference geographical database, which provides the ground truth, and comparing the relative importance of using Synthetic Aperture Radar (SAR) and optical remote sensing data to automatically infer AGB. In the experiments reported in this article, we assessed how those two remote sensing data sources impact the accuracy of AGB estimates produced by regression models built with Random Forest (RF) and Extreme Gradient Boosting (XGBoost). The research involved compiling a comprehensive database from many available forest inventories, integrating parcel- and tree-level data to enable precise biomass estimation. The methodology included setting up a spatial data analysis environment, standardizing data, and implementing an experimental protocol with feature selection and leave-one-out cross-validation. The results demonstrate that both kinds of data, i.e., SAR and optical, and their combination can be used for estimating AGB, providing valuable insights for forest management and climate change mitigation efforts. The reference database is available upon request to the corresponding authors.

Above-ground bole biomass and carbon stock of recreational trees at Agodi Gardens, Oyo State, Nigeria

This study used allometric equations to evaluate the biomass and carbon stock of recreational trees at Agodi Gardens in Ibadan Metropolis. Stratified sampling technique was used to delineate 15 plots (25m x 25m). Six allometric equations were selected to estimate Aboveground Biomass (AB) of the tree species. Models selected were assessed based on highest adjusted coefficient of determination (AdjR2), significant F-ratio (P<0.05) and least Root Means Square Error (RSME). A total of 220 trees belonging to 18 species were encountered. The dominant Diameter at Breast Height (DBH) and Height (Ht) were 62.8cm and 39.1m, respectively for Alstonia bonnei and Elaeis guineensis. The mean AB/ha was 2.8006Kgha-1 and the highest carbon stock of 3.332147 x 10-4 was recorded for Khaya ivorensis. Equation C= 2.6 x 10-7+ln (AB) + lnDBH²+lnHt (AdjR²=99%), gave the best fit to estimate carbon stock in the study area. The study found a significant relationship between AB, DBH and Ht, with a high correlation between DBH and Ht (P-value=0.00). Hence, as the DBH increases, the Ht increases with an increase in AB. Most trees had low slenderness coefficients (<70). The developed allometric model improved the prediction of aboveground stem biomass and carbon stock, making it useful for future research.

Bamboo Forests: Unleashing the Potential for Carbon Abatement and Local Income Improvements

Bamboo forests exhibit a unique efficient growth pattern that makes them invaluable in reducing atmospheric CO2 levels. Additionally, bamboo forests offer a diverse range of products, thus holding the potential to bolster local income. Despite these benefits, the comprehensive assessment of bamboo forests’ potential in both carbon abatement and improving local income enhancement has been hindered by the absence of a detailed bamboo biomass map. In this study, we address this gap by amalgamating a bamboo aboveground biomass (AGB) map covering three prominent producing provinces in southern China, utilizing multi-source remote sensing datasets. The results not only demonstrate a satisfactory consistency with China’s Ninth National Forest Inventory but also provide a more detailed spatial distribution. Based on this AGB estimation, we project an approximately threefold potential increase in annual bamboo culm harvest from existing bamboo forests. This represents a significant opportunity for expanding carbon abatement efforts, elevating local income levels, and facilitating the production of bamboo-derived biofuels. Furthermore, the adoption of an optimized management strategy has the potential to further enhance bamboo production. This study generates the first high-resolution bamboo AGB map and underscores the substantial potential of China’s bamboo forests in contributing to carbon sequestration and improving local income. The favorable income generated for local residents can serve as a compelling incentive for the implementation of sustainable forest management practices, offering a promising pathway toward achieving carbon-related objectives within the forestry sector and providing necessary support for forestry designation projects.

Improving AGB estimations by integrating tree height and crown radius from multisource remote sensing.

Precise estimation of forest above ground biomass (AGB) is essential for assessing its ecological functions and determining forest carbon stocks. It is difficult to directly obtain diameter at breast height (DBH) based on remote sensing imagery. Therefore, it is crucial to accurately estimate the AGB with features extracted directly from RS. This paper demonstrates the feasibility of estimating AGB from crown radius (R) and tree height (H) features extracted from multi-source RS data. Accurate information on tree height (H), crown radius (R), and diameter at breast height (DBH) can be obtained through point clouds generated by airborne laser scanning (ALS) and terrestrial laser scanning (TLS), respectively. Nine allometric growth equations were used to fit coniferous forests (Larix principis-rupprechtii) and broadleaf forests (Fraxinus chinensis and Sophora japonica). The fitting performance of models constructed using only "H" or "R" was compared with that of models constructed using both combined. The results showed that the quadratic polynomial model constructed with "H+R" fitted the AGB estimation better in each vegetation type, especially in the scenario of mixed tall and short coniferous forests, in which the R2 and RMSE were 0.9282 and 25.30 kg (rRMSE 17.31%), respectively. Therefore, using high-resolution data to extract crown radius and tree height can achieve high-precision, global-scale estimation of forest above ground biomass.

Estimation of above-ground biomass in dry temperate forests using Sentinel-2 data and random forest: a case study of the Swat area of Pakistan

Accurate mapping of above-ground biomass (AGB) is essential for carbon stock quantification and climate change impact assessment, particularly in mountainous areas. This study applies a random forest (RF) regression model to predict the spatial distribution of AGB in Usho (site A) and Utror (site B) forests located in the northern mountainous region of Pakistan. The predicted maps elucidate AGB variations across these sites, with non-forest areas excluded based on an normalized difference vegetation index (NDVI) threshold value of <0.4. Three different combinations of input datasets were used to predict the biomass, including spectral bands (SBs) only, vegetation indexes (VIs) only, and a combination of both spectral bands and vegetation indexes (SBVIs). Utilizing SBs, the biomass ranged between 150 and 286 mg/ha in site A and 99 and 376 mg/ha in site B. Meanwhile, using VIs indicated a biomass range of 163 Mg/ha–337 Mg/ha and 131–392 Mg/ha for sites A and B, respectively. The combination of spectral bands and vegetation indexes yielded AGB values of 145–290 Mg/ha in site A and 116–389 Mg/ha in site B. The northern and western regions of site A, characterized by higher altitudes and lower forest density, notably showed lower biomass values than other regions. Conversely, similar regions in site B, situated at lower latitudes, demonstrated different biomass ranges. The RF model exhibited robust accuracy, with R2 values of 0.74 and 0.83 for spectral bands and vegetation indexes, respectively. However, with a combination of both, an R2 of 0.79 was achieved. Furthermore, altitudinal gradients significantly influence the biomass distribution across both sites, with specific elevation ranges yielding optimal results. The AGB variation along the slope further corroborated these findings. In both sites, the western aspects showed the highest biomass across all combinations of input datasets. The variable importance analysis highlighted that ARVI8a, NDI45, Band12, Band11, TSAVI8, and ARVI8a are significant predictors in sites A and B. This comprehensive analysis enhances our understanding of AGB distribution in the mountainous forests of Pakistan, offering valuable insights for forest management and ecological studies.

Above ground biomass estimation in the upper Blue Nile basin forests, North-Western Ethiopia

Forest ecosystems play a decisive role in the global climatic condition, as well as, provides a wide range of societal benefits, including fuel-wood, tourism, and ecosystem services are considered as one of the major sources of livelihood for the local people in the upper Blue Nile Basin. Therefore, rapid and accurate estimation of forest biomass is crucial for greatly reducing the uncertainty in carbon stock assessments, and for designing strategic forest management plans. Because, above-ground biomass (AGB) estimation is important in determining the management, environmental, and economic roles of forests in the Blue Nile basin. The study was aimed at estimating above-ground biomass in the Upper Blue Nile Basin forests by integrating field-measured data with predictors from Sentinel-2 image. The relationship between measured AGB and sentinel-2 derived vegetation indices and biophysical parameters showed a good correlation result (r value ranging from 0.67 to 0.74). A stepwise regression analysis was carried out in order to develop AGB estimation model by identifying the most important variable. The result demonstrated that, green normalized difference vegetation index, leaf area index, fraction of absorbed photosynthetic active radiation and fractional vegetation cover achieved good performance in predicting AGB with R2 value > 0.5. AGB was estimated with a coefficient of determination (R2) of 0.59 adjusted R2 of 0.618 and root mean square error of (RMSE) 38.36 t/ha in comparison to field observations. The maximum AGB value of 268.32 t/ha was estimated in the Alemsaga natural forest, which is a highly protected dense forest stand from any entrance and disturbance. Generally, integrating field data with optical remote sensing data provides more reliable result for AGB estimation. Moreover, it is also recommended to employ RADAR and LiDAR remote sensing data products together in order to attain more precise estimate results of AGB with great potential for forest resource monitoring and management.

Geoinformatics and Modeling Approaches for Estimating Above-Ground Biomass in the Moist Deciduous Forests of Uttara Kannada, Karnataka, India

The present study aims to estimate Above-Ground Biomass (AGB) in the moist deciduous forests of Mundgod Taluk, Uttara Kannada district, Karnataka, India using a combination of field sampling and remote sensing techniques. AGB was assessed using Sentinel-2A satellite imagery with a spatial resolution of 10 meters. Field data were collected using the Point-Centered Quarter (PCQ) method, it includes measuring tree girth at breast height (GBH), tree height, and canopy density. AGB was calculated using artificial form factor and specific gravity of tree species and further modelled using the Normalized Difference Vegetation Index (NDVI) derived from satellite data. The results showed a significant correlation between canopy density and biomass, with very dense forests exhibiting the highest AGB values. The field-measured AGB was 436.96 t/ha for very dense forests, 259.89 t/ha for moderately dense forests, and 161.67 t/ha for open forests. A linear regression model developed between AGB and NDVI showed a high R² value of 0.91 for open forests, 0.87 for moderately dense forests, and 0.85 for very dense forests. The total area-weighted biomass for the study area was estimated at 8.87 million tons, with 4.79 million tons in very dense forests, 3.44 million tons in moderately dense forests, and 0.76 million tons in open forests. The regression model validation indicated low Root Mean Square Error (RMSE) values, with the moderately dense forests 8.81 t/ha and the in very dense forests 7.54 t/ha. This study highlights the effectiveness of integrating field measurements with remote sensing for rapid, reliable AGB estimation. The approach offers valuable insights into biomass distribution and carbon sequestration potential, providing a scalable method for carbon inventories at state and national levels, contributing to forest management and climate change mitigation efforts.

Estimation, Spatiotemporal Dynamics, and Driving Factors of Grassland Biomass Carbon Storage Based on Machine Learning Methods: A Case Study of the Hulunbuir Grassland

Precisely estimating the grassland biomass carbon storage is vital for evaluating grassland carbon sequestration potential and the monitoring and management of grassland resources. With the increasing intensity of climate change (CC) and human activities (HA), it is necessary to explore spatiotemporal variations in biomass carbon storage and its response to CC and HA. In this study, we focused on the Hulunbuir Grassland, utilizing sample plots data, MODIS data, environmental factors (terrain, soil, and climate), location factor, and texture characteristics to assess the performance of four machine learning algorithms: random forest, support vector machine, gradient boosting decision tree, and extreme gradient boosting in estimating grassland aboveground biomass (AGB). Based on the optimal model combined with root-shoot ratio data, grassland distribution data, and carbon content coefficients, the spatiotemporal characteristics and driving factors of biomass carbon storage from 2001–2022 were analyzed. The results showed that (1) the random forest achieved the highest prediction accuracy for grassland AGB, making it appropriate for AGB estimation in the Hulunbuir Grassland. (2) The spectral indices were the key variables of the grassland AGB, especially the enhanced vegetation index and difference vegetation index. (3) The 22-year average total biomass (TB) of the study area was 1037.10 gC/m2, of which the 22-year average AGB was 48.73 gC/m2 and 22-year average belowground biomass was 988.37 gC/m2, showing a spatial distribution feature of gradual increase from west to east. (4) From 2001–2022, TB carbon storage showed an insignificant growth trend (p > 0.05). The 22-year average carbon storage of TB was 72.34 ± 18.07 gC. (5) Climate factors were the main driving factors for the spatial pattern of grassland TB carbon density, while the combined effects of CC and HA were the main contributors to the interannual increase in grassland TB carbon density.

Estimation of aboveground biomass of Alfalfa using field robotics

Alfalfa is a high-yielding forage crop that is widely grown in the United States for grazing, hay and silage making. A proper maintenance of these grasslands is necessary to ensure optimum productivity and profits. The pre-harvest estimation of biomass yield helps in quantifying the profits and optimizing the forage allocation in advance. Most traditional methods of forage estimation are relatively laborious and time-consuming. Recent developments in contact and remote sensing technologies opened numerous paths for performing aboveground biomass estimation tasks with flexibility and easiness. This study focused on the development of crop height measurement systems for estimating the aboveground biomass yield of Alfalfa (Medicago sativa L.). Five different systems for measuring crop height were evaluated on their ability to estimate aboveground wet and dry biomass. The crop height measurement systems used in this study were Structure-from-Motion, Ultrasound Sensor and Ski, Inertial Measurement Unit and Ski, Inertial Measurement Units and Roller, and a Depth Camera. The results indicated that the system using the Inertial Measurement Unit sensor and ski (IMU-Ski) performed the best among ground-based methods (R2= 0.79; SeY= 3166 kg-wet/ha). The Structure-from-Motion (SfM) method using UAV also provided satisfactory results for biomass predictions (R2= 0.74; SeY= 2543 kg-wet/ha). The models based on IMU-Ski and UAV-based SfM methods were facilitated with vegetation coverage as an additional independent variable to evaluate their effect on biomass predictions. The results indicated that the vegetation coverage did not improve the predictions in any of these systems. Thus, the models based on only the crop height (IMU-Ski and UAV-SfM) were the recommended approaches for Alfalfa biomass estimations. The addition of data points for wide ranges of crop height and vegetation coverage is recommended for future studies to improve the results and ensure the adaptability of these systems in varying environmental conditions.

Estimation and Spatial Distribution of Individual Tree Aboveground Biomass in a Chinese Fir Plantation in the Dabieshan Mountains of Western Anhui, China

Understanding aboveground biomass (AGB) and its spatial distribution is key to evaluating the productivity and carbon sink effect of forest ecosystems. In this study, a 123-year-old Chinese fir forest in the Dabieshan Mountains of western Anhui Province was used as the research subject. Using AGB data calculated from field measurements of individual Chinese fir trees (diameter at breast height [DBH] and height) and spectral vegetation indices derived from unmanned aerial vehicle (UAV) remote sensing images, a random forest regression model was developed to predict individual tree AGB. This model was then used to estimate the AGB of individual Chinese fir trees. Combined with digital elevation model (DEM) data, the effects of topographic factors on the spatial distribution of AGB were analyzed. We found that remote sensing spectral vegetation indices obtained by UAVs can be used to predict the AGB of individual Chinese fir trees, with the normalized difference vegetation index (NDVI) and the optimized soil-adjusted vegetation index (OSAVI) being two important predictors. The estimated AGB of individual Chinese fir trees was 339.34 Mg·ha−1 with a coefficient of variation of 23.21%. At the local scale, under the influence of elevation, slope, and aspect, the AGB of individual Chinese fir trees showed a distribution pattern of decreasing from the middle to the northwest and southeast along the northeast-southwest trend. The effect of elevation on AGB was influenced by slope and aspect; AGB on steep slopes was higher than on gentle slopes, and the impact of slope on AGB was influenced by aspect. Additionally, AGB on north-facing slopes was higher than on south-facing slopes. Our results suggest that local environmental factors such as elevation, slope, and aspect should be considered in future Chinese fir plantation management and carbon sink assessments in the Dabieshan Mountains of western Anhui, China.

Canopy height uniformity: a new 3D phenotypic indicator linking individual plant to canopy

Canopy height uniformity (CHU) is a key indicator linking individual plants to populations. Determining CHU by the manual measurement of the height of individual plants is inefficient and subjective, making meeting the demand for a high-throughput assessment of CHU in high-yield crop management and variety selection challenging. Therefore, a high-throughput CHU estimation approach using unmanned aerial vehicle (UAV) light detection and ranging (LiDAR) data is proposed. First, individual plant point clouds were segmented by incorporating planting density, and the CHU was estimated based on the extracted plant heights (PHs). The CHU was then applied to quantify the effects of different cropping practices on maize canopy structure. In addition, 18 canopy structural parameters (SPs) were extracted from the canopy point cloud, and aboveground biomass (AGB) was estimated by combining these SPs with Pelican Optimization Algorithm (POA) machine learning models (POA-MLs). Finally, as an indicator of individual variability within the canopy, CHU was integrated into the training process to evaluate the accuracy of AGB estimation for different models and datasets. The results showed that the plant height extracted by the canopy population-individual plant segmentation was accurate, with R2 ranging from 0.85 to 0.93. The CHU was able to accurately quantify the effects of different cropping practices on canopy structure. An increase in applied nitrogen fertilizer and irrigation could significantly contribute to an increase in CHU and the formation of a clean and homogeneous canopy structure. Meanwhile, marginal effects can be accurately quantified through PHs estimation to further quantify the intra-canopy differences. In addition, the accuracy of the AGB estimation can be effectively improved by merging SPs, PH, and CHU. In this study, we demonstrated the efficacy of CHU as a phenotypic indicator for representing differences in canopy structure, thus providing practical phenotypic identification information for breeders and field managers.

Estimation of the Aboveground Biomass of Forests in Complex Mountainous Areas Using Regression Kriging

The forest area in China’s plateaus and mountainous regions accounts for as much as 43% of the country’s total forest area. Accurately estimating the aboveground biomass (AGB) in these plateau and mountain forests is significant for global carbon sink assessment and climate change. However, the complexity of the natural environment poses significant challenges to the accurate estimation of forests’ aboveground biomass (AGB), and the accuracy of both AGB estimation and spatial mapping needs further improvement. This study utilized support vector regression, backpropagation neural networks, and random forests to predict trends in AGB and establish an optimal original model for forest AGB estimation. Further calibration was performed using regression kriging on the optimal model. The results indicated that (1) random forests achieved the highest coefficient of determination (R2 for cypress = 0.63, R2 for fir = 0.66, R2 for cryptomeria = 0.64, and R2 for mixed forest = 0.54), showing greater potential in predicting AGB in complex mountainous mixed forests; (2) the residual kriging method significantly improved the estimation accuracy, increasing the R2 values of the original RF model by 25%, 24%, and 22%, and improving the accuracy of mixed plot estimates from 54% to 81%; and (3) the residual kriging method effectively addressed the underestimation of high values and overestimation of low values in AGB estimates, broadening the range of AGB values and allowing for a more detailed spatial distribution of forests’ aboveground biomass.

Design and performance of the Climate Change Initiative Biomass global retrieval algorithm

The increase in Earth observations from space in recent years supports improved quantification of carbon storage by terrestrial vegetation and fosters studies that relate satellite measurements to biomass retrieval algorithms. However, satellite observations are only indirectly related to the carbon stored by vegetation. While ground surveys provide biomass stock measurements to act as reference for training the models, they are sparsely distributed. Here, we addressed this problem by designing an algorithm that harnesses the interplay of satellite observations, modeling frameworks and field measurements, and generated global estimates of above-ground biomass (AGB) density that meet the requirements of the scientific community in terms of accuracy, spatial and temporal resolution. The design was adapted to the amount, type and spatial distribution of satellite data available around the year 2020. The retrieval algorithm estimated AGB annually by merging estimates derived from C- and L-band Synthetic Aperture Radar (SAR) backscatter observations with a Water Cloud type of model and does not rely on AGB reference data at the same spatial scale as the SAR data. This model is integrated with functions relating to forest structural variables that were trained on spaceborne LiDAR observations and sub-national AGB statistics. The yearly estimates of AGB were successively harmonized using a cost function that minimizes spurious fluctuations arising from the moderate-to-weak sensitivity of the SAR backscatter to AGB. The spatial distribution of the AGB estimates was correctly reproduced when the retrieval model was correctly set. Over-predictions occasionally occurred in the low AGB range (<50 Mg ha−1) and under-predictions in the high AGB range (>300 Mg ha−1). These errors were a consequence of sometimes too strong generalizations made within the modeling framework to allow reliable retrieval worldwide at the expense of accuracy. The precision of the estimates was mostly between 30% and 80% relative to the estimated value. While the framework is well founded, it could be improved by incorporating additional satellite observations that capture structural properties of vegetation (e.g., from SAR interferometry, low-frequency SAR, or high-resolution observations), a dense network of regularly monitored high-quality forest biomass reference sites, and spatially more detailed characterization of all model parameters estimates to better reflect regional differences.

Response of Hydrothermal Conditions to the Saturation Values of Forest Aboveground Biomass Estimation by Remote Sensing in Yunnan Province, China

Identifying the key climate variables affecting optical saturation values (OSVs) in forest aboveground biomass (AGB) estimation using optical remote sensing is crucial for analyzing OSV changes. This can improve AGB estimation accuracy by addressing the uncertainties associated with optical saturation. In this study, Pinus yunnanensis forests and Landsat 8 OLI imagery from Yunnan were used as case studies to explain this issue. The spherical model was applied to determine the OSVs using specific spectral bands (Blue, Green, Red, Near-Infrared (NIR), and Short-Wave Infrared Band 2 (SWIR2)) derived from Landsat 8 OLI imagery. Canonical correlation analysis (CCA) uncovered the intricate relationships between climatic variables and OSV variations. The results reveal the following: (1) All Landsat 8 OLI spectral bands showed a negative correlation with the Pinus yunnanensis forest AGB, with OSVs ranging from 104.42 t/ha to 209.11 t/ha, peaking in the southwestern region and declining to the lowest levels in the southeastern region. (2) CCA effectively explained 93.2% of the OSV variations, identifying annual mean temperature (AMT) as the most influential climatic factor. Additionally, the mean temperature of the wettest quarter (MTQ) and annual precipitation (ANP) were significant secondary determinants, with higher OSV values observed in warmer, more humid areas. These findings offer important insights into climate-driven OSV variations, reducing uncertainty in forest AGB estimation and enhancing the precision of AGB estimations in future research.

Precision estimation of winter wheat crop height and above-ground biomass using unmanned aerial vehicle imagery and oblique photoghraphy point cloud data.

Crop height and above-ground biomass (AGB) serve as crucial indicators for monitoring crop growth and estimating grain yield. Timely and accurate acquisition of wheat crop height and AGB data is paramount for guiding agricultural production. However, traditional data acquisition methods suffer from drawbacks such as time-consuming, laborious and destructive sampling. The current approach to estimating AGB using unmanned aerial vehicles (UAVs) remote sensing relies solely on spectral data, resulting in low accuracy in estimation. This method fails to address the ill-posed inverse problem of mapping from two-dimensional to three-dimensional and issues related to spectral saturation. To overcome these challenges, RGB and multispectral sensors mounted on UAVs were employed to acquire spectral image data. The five-directional oblique photography technique was utilized to construct the three-dimensional point cloud for extracting crop height. This study comparatively analyzed the potential of the mean method and the Accumulated Incremental Height (AIH) method in crop height extraction. Utilizing Vegetation Indices (VIs), AIH and their feature combinations, models including Random Forest Regression (RFR), eXtreme Gradient Boosting (XGBoost), Gradient Boosting Regression Trees (GBRT), Support Vector Regression (SVR) and Ridge Regression (RR) were constructed to estimate winter wheat AGB. The research results indicated that the AIH method performed well in crop height extraction, with minimal differences between 95% AIH and measured crop height values were observed across various growth stages of wheat, yielding R2 ranging from 0.768 to 0.784. Compared to individual features, the combination of multiple features significantly improved the model's estimate accuracy. The incorporation of AIH features helps alleviate the effects of spectral saturation. Coupling VIs with AIH features, the model's R2 increases from 0.694-0.885 with only VIs features to 0.728-0.925. In comparing the performance of five machine learning algorithms, it was discovered that models constructed based on decision trees were superior to other machine learning algorithms. Among them, the RFR algorithm performed optimally, with R2 ranging from 0.9 to 0.93. In conclusion, leveraging multi-source remote sensing data from UAVs with machine learning algorithms overcomes the limitations of traditional crop monitoring methods, offering a technological reference for precision agriculture management and decision-making.

Allometric Models of Aboveground Biomass in Mangroves Compared with Those of the Climate Action Reserve Standard Applied in the Carbon Market

The standardized methods used in carbon markets require measurement of the biomass and carbon stored in trees, which can be quantified through allometric equations. The objective of this study was to analyze aboveground biomass estimates with allometric models in three mangrove species and compare them with those used by the Climate Action Reserve (CAR) standard. The mangrove forest in Tabasco, Mexico, was certified with the Forest Protocol for Mexico Version 2.0 (FPM) of the CAR standard. Allometric equations for mangrove species were reviewed to determine the most suitable equation for the calculation of biomass. The predictions of the allometric equations of the FPM were analyzed with data from Tabasco from the National Forest and Soil Inventory 2015–2020, and the percentages of trees within the ranges of diameters of the FPM equations were determined. The FPM equations generated higher biomass values for Rhizophora mangle and lower values for Avicennia germinans than the seven equations with which they were compared. In the mangrove swamp of Ejido Úrsulo Galván, Tabasco, 81.8% of the biomass of A. germinans, 34.4% of Laguncularia racemosa and 24.0% of R. mangle were within the diameter range of the FPM equations, and in Tabasco, 28.5% of A. germinans, 16.7% of L. racemosa and 5.7% of R. mangle were within the diameter range. For A. germinans and R. mangle, we recommend using the equation that considers greater maximum diameters. The allometric equations of the FPM do not adequately predict a large percentage of the biomass.

Spatial pattern of forest aboveground biomass and its environmental influencing factors in Qinling-Daba Mountains, central China

Accurate estimation of forest aboveground biomass (AGB) is crucial for understanding and managing forest ecosystems in the context of global environmental change, and also provides a scientific basis for national and regional ecological planning and carbon emission reduction policies. In order to investigate the regional pattern of forest AGB and its influencing factors in central China, a total of 469 sample plots were measured along four sample transects and on six mountains in field survey. The results showed that: 1) Two longitudinal distribution patterns of forest AGB were found, and one was that the AGB in the Qinling Mountains and the Daba Moutains gradually decreased from east to west, and the other was that the AGB in the areas between the two mountains gradually increased from east to west. The latitudinal distribution pattern of the forest AGB showed an "increasing–decreasing-increasing–decreasing" trend from south to north. The altitudinal distribution pattern showed a "first increasing-then decreasing" pattern with increasing altitude. 2) The influence of each factor on the spatial pattern of forest AGB was manifested as temperature > precipitation > HAI > topography, indicating that the spatial pattern of forest AGB in central China was the result of the interaction of climate, human activities and natural factors.

Forage Height and Above-Ground Biomass Estimation by Comparing UAV-Based Multispectral and RGB Imagery.

Crop height and biomass are the two important phenotyping traits to screen forage population types at local and regional scales. This study aims to compare the performances of multispectral and RGB sensors onboard drones for quantitative retrievals of forage crop height and biomass at very high resolution. We acquired the unmanned aerial vehicle (UAV) multispectral images (MSIs) at 1.67 cm spatial resolution and visible data (RGB) at 0.31 cm resolution and measured the forage height and above-ground biomass over the alfalfa (Medicago sativa L.) breeding trials in the Canadian Prairies. (1) For height estimation, the digital surface model (DSM) and digital terrain model (DTM) were extracted from MSI and RGB data, respectively. As the resolution of the DTM is five times less than that of the DSM, we applied an aggregation algorithm to the DSM to constrain the same spatial resolution between DSM and DTM. The difference between DSM and DTM was computed as the canopy height model (CHM), which was at 8.35 cm and 1.55 cm for MSI and RGB data, respectively. (2) For biomass estimation, the normalized difference vegetation index (NDVI) from MSI data and excess green (ExG) index from RGB data were analyzed and regressed in terms of ground measurements, leading to empirical models. The results indicate better performance of MSI for above-ground biomass (AGB) retrievals at 1.67 cm resolution and better performance of RGB data for canopy height retrievals at 1.55 cm. Although the retrieved height was well correlated with the ground measurements, a significant underestimation was observed. Thus, we developed a bias correction function to match the retrieval with the ground measurements. This study provides insight into the optimal selection of sensor for specific targeted vegetation growth traits in a forage crop.