Essential Carboxyl Research Articles

Structure of ATP synthase from Paracoccus denitrificans determined by X-ray crystallography at 4.0 Å resolution

The structure of the intact ATP synthase from the α-proteobacterium Paracoccus denitrificans, inhibited by its natural regulatory ζ-protein, has been solved by X-ray crystallography at 4.0 Å resolution. The ζ-protein is bound via its N-terminal α-helix in a catalytic interface in the F1 domain. The bacterial F1 domain is attached to the membrane domain by peripheral and central stalks. The δ-subunit component of the peripheral stalk binds to the N-terminal regions of two α-subunits. The stalk extends via two parallel long α-helices, one in each of the related b and b' subunits, down a noncatalytic interface of the F1 domain and interacts in an unspecified way with the a-subunit in the membrane domain. The a-subunit lies close to a ring of 12 c-subunits attached to the central stalk in the F1 domain, and, together, the central stalk and c-ring form the enzyme's rotor. Rotation is driven by the transmembrane proton-motive force, by a mechanism where protons pass through the interface between the a-subunit and c-ring via two half-channels in the a-subunit. These half-channels are probably located in a bundle of four α-helices in the a-subunit that are tilted at ∼30° to the plane of the membrane. Conserved polar residues in the two α-helices closest to the c-ring probably line the proton inlet path to an essential carboxyl group in the c-subunit in the proton uptake site and a proton exit path from the proton release site. The structure has provided deep insights into the workings of this extraordinary molecular machine.

Mutation of Lysine 317 in the D2 Subunit of Photosystem II Alters Chloride Binding and Proton Transport

The role of chloride in photosystem II (PSII) is unclear. Using structural information from PSII and a careful comparison with other chloride-activated enzymes, we proposed a role for chloride at the D2-K317 site in PSII [Pokhrel, R., et al. (2011) Biochemistry 50, 2725-2734]. To probe the role of chloride at this site, the D2-K317R, D2-K317A, D2-K317Q, and D2-K317E mutations were created in the cyanobacterium Synechocystis sp. PCC 6803. Purified PSII from the mutants was probed with Fourier transform infrared difference spectroscopy, demonstrating that compared to PSII from wild-type Synechocystis, PSII from all four mutants exhibit changes in the conformations of the polypeptide backbone and carboxylate groups. However, D2-K317R PSII exhibits minor changes, whereas D2-K317A, D2-K317Q, and D2-K317E PSII exhibit more substantial changes in polypeptide conformations. Steady-state oxygen-evolution measurements of purified PSII core complexes show that the oxygen-evolution activity of D2-K317A is independent of chloride. This is consistent with the loss of the chloride requirement when the charged K residue is replaced with an uncharged residue that no longer binds to an essential carboxylate (D1-D61) in the absence of chloride, analogous to observations in other chloride-activated enzymes. In contrast, the oxygen-evolution activity of D2-K317R is sensitive to the chloride concentration in the assay buffer; the effective KD for chloride binding is higher in D2-K317R than in wild-type PSII, possibly because of a less optimal binding site in the mutant. The S2 states of wild-type, D2-K317A, and D2-K317R PSII were probed using electron paramagnetic resonance spectroscopy. A g = 2 multiline signal, similar to the wild-type signal, was observed for D2-K317A and D2-K317R. However, a g = 4 signal was also observed for D2-K317R. Measurements of flash-dependent O2 yields showed that D2-K317A and D2-K317R have a higher miss factor than wild-type PSII. The oxygen-release kinetics of D2-K317A and D2-K317R were slower than those of the wild type, in the following order: D2-K317A < D2-K317R < wild type. These results collectively suggest that proton transfer is inefficient in D2-K317A and D2-K317R, thereby giving rise to a higher miss factor and slower oxygen-release kinetics.

Active site characterization and molecular cloning of Tenebrio molitor midgut trehalase and comments on their insect homologs

The soluble midgut trehalase from Tenebrio molitor (TmTre1) was purified after several chromatographic steps, resulting in an enzyme with 58 kDa and pH optimum 5.3 (ionizing active groups in the free enzyme: pKe1 = 3.8 ± 0.2 pKe2 = 7.4 ± 0.2). The purified enzyme corresponds to the deduced amino acid sequence of a cloned cDNA (TmTre1-cDNA), because a single cDNA coding a soluble trehalase was found in the T. molitor midgut transcriptome. Furthermore, the mass of the protein predicted to be coded by TmTre1-cDNA agrees with that of the purified enzyme. TmTre1 has the essential catalytic groups Asp 315 and Glu 513 and the essential Arg residues R164, R217, R282. Carbodiimide inactivation of the purified enzyme at different pH values reveals an essential carboxyl group with pKa = 3.5 ± 0.3. Phenylglyoxal modified a single Arg residue with pKa = 7.5 ± 0.2, as observed in the soluble trehalase from Spodoptera frugiperda (SfTre1). Diethylpyrocarbonate modified a His residue that resulted in a less active enzyme with pKe1 changed to 4.8 ± 0.2. In TmTre1 the modified His residue (putatively His 336) is more exposed than the His modified in SfTre1 (putatively His 210) and that affects the ionization of an Arg residue. The architecture of the active site of TmTre1 and SfTre1 is different, as shown by multiple inhibition analysis, the meaning of which demands further research. Trehalase sequences obtained from midgut transcriptomes (pyrosequencing and Illumina data) from 8 insects pertaining to 5 different orders were used in a cladogram, together with other representative sequences. The data suggest that the trehalase gene went duplication and divergence prior to the separation of the paraneopteran and holometabolan orders and that the soluble trehalase derived from the membrane-bound one by losing the C-terminal transmembrane loop.

Resolving the Negative Potential Side (n-side) Water-accessible Proton Pathway of F-type ATP Synthase by Molecular Dynamics Simulations

The rotation of F(1)F(o)-ATP synthase is powered by the proton motive force across the energy-transducing membrane. The protein complex functions like a turbine; the proton flow drives the rotation of the c-ring of the transmembrane F(o) domain, which is coupled to the ATP-producing F(1) domain. The hairpin-structured c-protomers transport the protons by reversible protonation/deprotonation of a conserved Asp/Glu at the outer transmembrane helix (TMH). An open question is the proton transfer pathway through the membrane at atomic resolution. The protons are thought to be transferred via two half-channels to and from the conserved cAsp/Glu in the middle of the membrane. By molecular dynamics simulations of c-ring structures in a lipid bilayer, we mapped a water channel as one of the half-channels. We also analyzed the suppressor mutant cP24D/E61G in which the functional carboxylate is shifted to the inner TMH of the c-protomers. Current models concentrating on the "locked" and "open" conformations of the conserved carboxylate side chain are unable to explain the molecular function of this mutant. Our molecular dynamics simulations revealed an extended water channel with additional water molecules bridging the distance of the outer to the inner TMH. We suggest that the geometry of the water channel is an important feature for the molecular function of the membrane part of F(1)F(o)-ATP synthase. The inclination of the proton pathway isolates the two half-channels and may contribute to a favorable clockwise rotation in ATP synthesis mode.

Kinetic Analysis of DNA Strand Joining by Chlorella Virus DNA Ligase and the Role of Nucleotidyltransferase Motif VI in Ligase Adenylylation

Chlorella virus DNA ligase (ChVLig) is an instructive model for mechanistic studies of the ATP-dependent DNA ligase family. ChVLig seals 3'-OH and 5'-PO(4) termini via three chemical steps: 1) ligase attacks the ATP α phosphorus to release PP(i) and form a covalent ligase-adenylate intermediate; 2) AMP is transferred to the nick 5'-phosphate to form DNA-adenylate; 3) the 3'-OH of the nick attacks DNA-adenylate to join the polynucleotides and release AMP. Each chemical step requires Mg(2+). Kinetic analysis of nick sealing by ChVLig-AMP revealed that the rate constant for phosphodiester synthesis (k(step3) = 25 s(-1)) exceeds that for DNA adenylylation (k(step2) = 2.4 s(-1)) and that Mg(2+) binds with similar affinity during step 2 (K(d) = 0.77 mM) and step 3 (K(d) = 0.87 mM). The rates of DNA adenylylation and phosphodiester synthesis respond differently to pH, such that step 3 becomes rate-limiting at pH ≤ 6.5. The pH profiles suggest involvement of one and two protonation-sensitive functional groups in catalysis of steps 2 and 3, respectively. We suggest that the 5'-phosphate of the nick is the relevant protonation-sensitive moiety and that a dianionic 5'-phosphate is necessary for productive step 2 catalysis. Motif VI, located at the C terminus of the OB-fold domain of ChVLig, is a conserved feature of ATP-dependent DNA ligases and GTP-dependent mRNA capping enzymes. Presteady state and burst kinetic analysis of the effects of deletion and missense mutations highlight the catalytic contributions of ChVLig motif VI, especially the Asp-297 carboxylate, exclusively during the ligase adenylylation step.

Structure of the c(10) ring of the yeast mitochondrial ATP synthase in the open conformation.

The proton pores of F1Fo-ATP synthases consist of a ring of c-subunits, which rotates driven by downhill proton diffusion. An essential carboxylate side chain in the c-subunit provides a proton-binding site. In all the structures of c-rings reported to date, these sites are in a closed, ion-locked state. Structures are presented of the c10 ring from Saccharomyces cerevisiae determined at pH 8.3, 6.1 and 5.5, at resolutions of 2.0 Å, 2.5 Å and 2.0 Å, respectively. The overall structure of this mitochondrial c-ring is similar to known homologues, except that the essential carboxylate, Glu59, adopts an open extended conformation. Molecular dynamics simulations reveal that opening of the essential carboxylate is a consequence of the amphiphilic nature of the crystallization buffer. We propose that this new structure represents the functionally open form of the c-subunit, which facilitates proton loading and release.

Crystal structure of leukotriene A 4 hydrolase in complex with kelatorphan, implications for design of zinc metallopeptidase inhibitors

Leukotriene A 4 hydrolase (LTA4H) is a key enzyme in the inflammatory process of mammals. It is an epoxide hydrolase and an aminopeptidase of the M1 family of the MA clan of Zn-metallopeptidases. We have solved the crystal structure of LTA4H in complex with N-[3( R)-[(hydroxyamino)carbonyl]-2-benzyl-1-oxopropyl]- L-alanine, a potent inhibitor of several Zn-metalloenzymes, both endopeptidases and aminopeptidases. The inhibitor binds along the sequence signature for M1 aminopeptidases, GXMEN. It exhibits bidentate chelation of the catalytic zinc and binds to LTA4H’s enzymatically essential carboxylate recognition site. The structure gives clues to the binding of this inhibitor to related enzymes and thereby identifies residues of their S1′ sub sites as well as strategies for design of inhibitors.

Structural basis for autoinhibition and activation of Auto, a virulence‐associated peptidoglycan hydrolase of Listeria monocytogenes

During a bacterial infection, each successive step is orchestrated by a dedicated set of virulence factors. In Gram-positive bacteria, the presentation or release of such factors is crucially dependent on the continual remodelling of the cell wall. We have investigated the autolysin or peptidoglycan hydrolase Auto (Lmo1076) from the human pathogen Listeria monocytogenes to structurally and biochemically underpin its role in host cell invasion. We demonstrate that Auto is an N-acetylglucosaminidase, that it is autoinhibited when newly secreted but activated by proteolytic cleavage, that it has an acidic pH optimum and that it preferentially cleaves acetylated over de-acetylated peptidoglycan. The crystal structure of Auto, the first for glycoside hydrolase family 73, and the first for a listerial autolysin, indicates that autoinhibition is due to an N-terminal alpha-helix unique to Auto that physically blocks the substrate-binding cleft. We identify Glu122 and Glu156 as the two catalytically essential carboxylate groups. The physical properties of Auto as well as its localization to lipoteichoic acid by its four C-terminal GW modules imply cell wall degradation by Auto to be highly co-ordinated. Its spatio-temporally controlled activation and localized activity in an acidified environment indicate that it facilitates remodelling of the cell wall and may be involved in co-ordinating the release of virulence factors at specific stages of an infection.

Novel features of the rotary catalytic mechanism revealed in the structure of yeast F1 ATPase

The crystal structure of yeast mitochondrial F(1) ATPase contains three independent copies of the complex, two of which have similar conformations while the third differs in the position of the central stalk relative to the alpha(3)beta(3) sub-assembly. All three copies display very similar asymmetric features to those observed for the bovine enzyme, but the yeast F(1) ATPase structures provide novel information. In particular, the active site that binds ADP in bovine F(1) ATPase has an ATP analog bound and therefore this structure does not represent the ADP-inhibited form. In addition, one of the complexes binds phosphate in the nucleotide-free catalytic site, and comparison with other structures provides a picture of the movement of the phosphate group during initial binding and subsequent catalysis. The shifts in position of the central stalk between two of the three copies of yeast F(1) ATPase and when these structures are compared to those of the bovine enzyme give new insight into the conformational changes that take place during rotational catalysis.

Antiviral properties of quinolone-based drugs.

Quinolones represent an important class of broad-spectrum antibacterials, the main structural features of which are a 1,4 dihydro-4-oxo-quinolinyl moiety bearing an essential carboxyl group at position 3. Quinolones inhibit prokaryotic type II topoisomerases, namely DNA gyrase and, in a few cases, topoisomerase IV, through direct binding to the bacterial chromosome. Based on the hypothesis that these drugs could also bind to the viral nucleic acids or nucleoprotein-complexes, several quinolone derivatives were tested for their antiviral activity. Indeed, antibacterial fluoroquinolones were shown to be effective against vaccinia virus and papovaviruses; these preliminary results prompted the synthesis of modified quinolones to optimize antiviral action and improve selectivity index. The introduction of an aryl group at the piperazine moiety of the fluoroquinolone shifted the activity from antibacterial to antiviral, with a specific action against HIV. The antiviral activity seemed to be related to an inhibitory effect at the transcriptional level, and further evidence suggested a mechanism of action mediated by inhibition of Tat functions. Substitution of the fluorine at position 6 with an amine group to give aryl-piperazinyl-6-amino-quinolones improved the activity and selectivity against HIV-1: the most potent compound of this series was shown to inhibit virus replication through interference with Tat-TAR interaction. A comprehensive SAR investigation was performed based on additional chemical intervention to the quinolone template moiety, such as the introduction of nucleoside derivative functions. The information gained so far will be useful for future rational drug design aimed at developing new compounds with optimized antiviral activity.

The Membrane Domain of the Na+-motive V-ATPase from Enterococcus hirae Contains a Heptameric Rotor

In F-ATPases, ATP hydrolysis is coupled to translocation of ions through membranes by rotation of a ring of c subunits in the membrane. The ring is attached to a central shaft that penetrates the catalytic domain, which has pseudo-3-fold symmetry. The ion translocation pathway lies between the external circumference of the ring and another hydrophobic protein. The H+ or Na+:ATP ratio depends upon the number of ring protomers, each of which has an essential carboxylate involved directly in ion translocation. This number and the ratio differ according to the source, and 10, 11, and 14 protomers have been found in various enzymes, with corresponding calculated H+ or Na+:ATP ratios of 3.3, 3.7, and 4.7. V-ATPases are related in structure and function to F-ATPases. Oligomers of subunit K from the Na+-motive V-ATPase of Enterococcus hirae also form membrane rings but, as reported here, with 7-fold symmetry. Each protomer has one essential carboxylate. Thus, hydrolysis of one ATP provides energy to extrude 2.3 sodium ions. Symmetry mismatch between the catalytic and membrane domains appears to be an intrinsic feature of both V- and F-ATPases.

Pharmacophore definition and three-dimensional quantitative structure-activity relationship study on structurally diverse prostacyclin receptor agonists.

Prostacyclin is an endogenous mediator that shows potent platelet inhibitory activity and powerful relaxation of peripheral resistance vessels. Prostacyclin receptor agonists are valuable drugs in the treatment of various vascular diseases spanning primary pulmonary hypertension to Raynaud's syndrome. Although agonists from various structural classes were synthesized, a common pharmacophore was never defined. Therefore, an attempt was made to integrate the different agonists into a single model. A dataset of structurally diverse prostacyclin receptor agonists was tested for its affinity to the human platelet prostacyclin receptor. The dataset included prostanoid and nonprostanoid ligands comprising iloprost, cicaprost, and BMY45778. Extensive conformational analyses were performed for both classes of compounds because of the absence of rigid templates. The search and superimposition procedure yielded a pharmacophore that aligns the essential carboxylate group of the agonists as well as demonstrates that different functional groups in prostanoid and nonprostanoid agonists can be arranged in a uniform conformation. A three-dimensional quantitative structure-activity relationship study was performed using the programs GRID and GOLPE. This analysis yielded a cross-validated correlation coefficient of 0.77. With this model, it is possible to predict the affinity of untested compounds.

Structure of Ala24/Asp61 --> Asp24/Asn61 substituted subunit c of Escherichia coli ATP synthase: implications for the mechanism of proton transport and rotary movement in the F0 complex.

The structure of the A24D/D61N substituted subunit c of Escherichia coli ATP synthase, in which the essential carboxylate has been switched from residue 61 of the second transmembrane helix (TMH) to residue 24 of the first TMH, has been determined by heteronuclear multidimensional NMR in a monophasic chloroform/methanol/water (4:4:1) solvent mixture. As in the case of the wild-type protein, A24D/D61N substituted subunit c forms a hairpin of two extended alpha-helices (residues 5-39 and 46-78), with residues 40-45 forming a connecting loop at the center of the protein. The structure was determined at pH 5, where Asp24 is fully protonated. The relative orientation of the two extended helices in the A24D/D61N structure is different from that in the protonated form of the wild-type protein, also determined at pH 5. The C-terminal helix is rotated by 150 degrees relative to the wild-type structure, and the N-terminal helix is rotated such that the essential Asp24 carboxyl group packs on the same side of the molecule as Asp61 in the wild-type protein. The changes in helix-helix orientation lead to a structure that is quite similar to that of the deprotonated form of wild-type subunit c, determined at pH 8. When a decameric ring of c subunits was modeled from the new structure, the Asp24 carboxyl group was found to pack in a cavity at the interface between two subunits that is similar to the cavity in which Asp61 of the wild-type protein is predicted to pack. The interacting faces of the packed subunits in this model are also similar to those in the wild-type model. The results provide further evidence that subunit c is likely to fold in at least two conformational states differing most notably in the orientation of the C-terminal helix. Based upon the structure, a mechanistic model is discussed that indicates how the wild-type and A24D/D61N subunits could utilize similar helical movements during H(+) transport-coupled rotation of the decameric c ring.

Chemical mechanism of β-xylosidase from Trichoderma reesei QM 9414: pH-dependence of kinetic parameters

The variation of kinetic parameters of β-xylosidase from Trichoderma reesei QM 9414 with pH was used to elucidate the chemical mechanism of the p-nitrophenyl β-D-xylopyranoside hydrolysis. The pH-dependence of V and V/K m showed that a group on the enzyme with a pK value of 3.20 must be unprotonated and a group with a pK value of 5.20 must be protonated for activity and both are involved in catalysis. Solvent-perturbation studies indicated that these groups are neutral acid type. Temperature dependence of kinetic parameters suggested the stickiness of the substrate at lower temperatures than the optimum and the calculated ionization enthalpies pointed to carboxyl groups as responsible for both pKs. Chemical modification with triethyloxonium tetrafluoroborate and protection with the substrate studies demonstrated essential carboxyl groups on the enzyme. Profiles of pK i for D-gluconic acid lactone indicated that a group with a pK value of 3.45 must be protonated for binding and it has been assigned to the carboxyl group of D-gluconic acid formed by lactone ring breakdown in solution.

Introduction of a carboxyl group in the first transmembrane helix of Escherichia coli F1Fo ATPase subunit c and cytoplasmic pH regulation.

The multicopy subunit c of the H(+)-transporting F1Fo ATP synthase of Escherichia coli folds across the membrane as a hairpin of two hydrophobic alpha helices. The subunits interact in a front-to-back fashion, forming an oligomeric ring with helix 1 packing in the interior and helix 2 at the periphery. A conserved carboxyl, Asp(61) in E. coli, centered in the second transmembrane helix is essential for H+ transport. A second carboxylic acid in the first transmembrane helix is found at a position equivalent to Ile28 in several bacteria, some the cause of serious infectious disease. This side chain has been predicted to pack proximal to the essential carboxyl in helix 2. It appears that in some of these bacteria the primary function of the enzyme is H+ pumping for cytoplasmic pH regulation. In this study, Ile28 was changed to Asp and Glu. Both mutants were functional. However, unlike the wild type, the mutants showed pH-dependent ATPase-coupled H+ pumping and passive H+ transport through Fo. The results indicate that the presence of a second carboxylate enables regulation of enzyme function in response to cytoplasmic pH and that the ion binding pocket is aqueous accessible. The presence of a single carboxyl at position 28, in mutants I28D/D61G and I28E/D61G, did not support growth on a succinate carbon source. However, I28E/D61G was functional in ATPase-coupled H+ transport. This result indicates that the side chain at position 28 is part of the ion binding pocket.

Essential carboxyl residues in the active site of a xylanase from Trichoderma longibrachiatum

Essential carboxyl residues were identified in the active site of an endo- β-1,4-xylanase isolated from Trichoderma longibrachiatum. Tryptophan residues were implicated in catalysis but were not essential for activity. Tyrosine residues were not involved in catalysis.

Structural and Functional Role of Tryptophan in Xylanase from an ExtremophilicBacillus:Assessment of the Active Site

Microenvironment and conformation of the active site of xylanase from an extremophilicBacilluswas deciphered for the first time using fluorescence spectroscopy. NBS modified enzyme showed complete inactivation and the kinetic analysis implicated the presence of an essential tryptophan at the active site of xylanase. Xylan (0.5%) protected the enzyme completely from inactivation with NBS, whereas it afforded 35% protection against the loss of fluorescence, suggesting that not all the tryptophans are involved at the substrate binding site. Quenching studies revealed that acrylamide was more efficient than KI and CsCl as indicated by the higher Stern–Volmer quenching constants (Ksv). The steric factor represented by the percentage accessibility of the tryptophan residues of XylII was higher with the positively charged Cs+(80) than with the negatively charged I−(10), suggesting that the tryptophan residues are located in a relatively electronegative environment. In the presence of 6 M Gdn HCl the fluorescence shifted to 350 nm with increased accessibility of the fluorophore to the quenchers. The proximity of the essential carboxyl groups with a high pKa value of 6.9 [Chauthaiwale and Rao (1994)Biochim. Biophys. Acta] probably contributes to the electronegative environment of the tryptophan residue. Our results on sequence analysis of the gene encoding for XylII (Accession Number U83602 in the GenBank database) have shown that Trp 61 is highly conserved and may play a role in the structure–function relationship of the enzyme.

Essential carboxyl and tryptophan residues in jack bean α- d-Mannosidase

α-Mannosidase from Canavalia ensiformis was chemically modified using carboxyl group-specific carbodiimides and tryptophan specific N-bromosuccinimide. Data consistent with the presence of one essential carboxyl residue and 4 tryptophan residues was obtained. N-terminal sequencing studies indicated that the enzyme exists as a dimer with subunit M r of 110,000.

Chemical Modification of Genypterus maculatus Arginase by Woodward's Reagent K and Diethyl Pyrocarbonate: Evidence for an Essential Carboxylate and a Nonessential, Albeit Important Histidine Residue

Liver arginase from Genypterus maculatus was completely inactivated by Woodward's reagent K (WRK) and partially inactivated by diethyl pyrocarbonate (DEPC). Borate protected against inactivation by DEPC and caused a nontotal inhibition of the enzyme. Inactivation by WRK (second order rate constant, 26.3 M−1 min−1) was associated to the chemical modification of a single residue with a pKa value of 6.5 at 25°C. Inactivation by DEPC (second order rate constant, 336 M−1 min−1) involved a single residue with a pKa of 6.8 at 25°C and it was reversed by hydroxylamine. A carboxylate residue associated to the action of a metal-bound hydroxyl as a nucleophile, and a histidine residue with a nonessential role in the catalytic mechanism of arginase, are considered.

Site-directed mutagenesis of putative active site residues of MunI restriction endonuclease: replacement of catalytically essential carboxylate residues triggers DNA binding specificity.

Mapping of the conserved sequence regions in the restriction endonucleases MunI (C/AATTG) and EcoRI (G/AATTC) to the known X-ray structure of EcoRI allowed us to identify the sequence motif 82PDX14EXK as the putative catalytic/Mg2+ ion binding site of MunI [Siksnys, V., Zareckaja, N., Vaisvila, R., Timinskas, A., Stakenas, P., Butkus, V., & Janulaitis, A. Gene (1994) 142, 1-8]. Site-directed mutagenesis was then used to test whether amino acids P82, D83, E98, and K100 were important for the catalytic activity of MunI. Mutation P82A generated only a marginal effect on the cleavage properties of the enzyme. Investigation of the cleavage properties of the D83, E98, and K100 substitution mutants, however, in vivo and in vitro, revealed either an absence of catalytic activity or markedly reduced catalytic activity. Interestingly, the deleterious effect of the E98Q replacement in vitro was partially overcome by replacement of the metal cofactor used. Though the catalytic activity of the E98Q mutant was only 0.4% of WT under standard conditions (in the presence of Mg2+ ions), the mutant exhibited 40% of WT catalytic activity in buffer supplemented with Mn2+ ions. Further, the DNA binding properties of these substitution mutants were analyzed using the gel shift assay technique. In the absence of Mg2+ ions, WT MunI bound both cognate DNA and noncognate sequences with similar low affinities. The D83A and E98A mutants, in contrast, in the absence of Mg2+ ions, exhibited significant specificity of binding to cognate DNA, suggesting that the substitutions made can simulate the effect of the Mg2+ ion in conferring specificity to the MunI restriction enzyme.