Esophageal Tissue Engineering Research Articles

Resveratrol promotes the differentiation of human umbilical cord mesenchymal stem cells into esophageal fibroblasts via AKT signaling pathway.

Objectives: Resveratrol has been implicated in the differentiation and development of human umbilical cord mesenchymal stem cells. The differentiation of into esophageal fibroblasts is a promising strategy for esophageal tissue engineering. However, the pharmacological effect and underlying mechanism of resveratrol on human umbilical cord mesenchymal stem cells differentiation are unknown. Here, we investigated the effects and mechanism of resveratrol on the differentiation of human umbilical cord mesenchymal stem cells. Methods: Using a transwell-membrane coculture system to culture human umbilical cord mesenchymal stem cells and esophageal fibroblasts, we examined how resveratrol act on the differentiation of human umbilical cord mesenchymal stem cells. Immunocytochemistry, Sirius red staining, quantitative real-time PCR, and Western blotting were performed to examine collagen synthesis and possible signaling pathways in human umbilical cord mesenchymal stem cells. Results: We found that resveratrol promoted collagen synthesis and AKT phosphorylation. However, co-treatment of cells with resveratrol and the PI3K inhibitor LY294002 inhibited collagen synthesis and AKT phosphorylation. We demonstrated that resveratrol down-regulated the expression of IL-6, TGF-β, caspase-9, and Bax by activating the AKT pathway in human umbilical cord mesenchymal stem cell. Furthermore, resveratrol inhibited phosphorylated NF-ĸB in human umbilical cord mesenchymal stem cells. Conclusion: Our data suggest that resveratrol promotes the differentiation of human umbilical cord mesenchymal stem cells into fibroblasts. The underlying mechanism is associated with the downregulation of IL-6 and TGF-β via the AKT pathway and by inhibiting the NF-ĸB pathway. Resveratrol may be useful for esophageal tissue engineering.

Assessment of Esophageal Reconstruction via Bioreactor Cultivation of a Synthetic Scaffold in a Canine Model.

Using tissue-engineered materials for esophageal reconstruction is a technically challenging task in animals that requires bioreactor training to enhance cellular reactivity. There have been many attempts at esophageal tissue engineering, but the success rate has been limited due to difficulty in initial epithelialization in the special environment of peristalsis. The purpose of this study was to evaluate the potential of an artificial esophagus that can enhance the regeneration of esophageal mucosa and muscle through the optimal combination of a double-layered polymeric scaffold and a custom-designed mesenchymal stem cell-based bioreactor system in a canine model. We fabricated a novel double-layered scaffold as a tissue-engineered esophagus using an electrospinning technique. Prior to transplantation, human-derived mesenchymal stem cells were seeded into the lumen of the scaffold, and bioreactor cultivation was performed to enhance cellular reactivity. After 3 days of cultivation using the bioreactor system, tissue-engineered artificial esophagus was transplanted into a partial esophageal defect (5×3 cm-long resection) in a canine model. Scanning electron microscopy (SEM) showed that the electrospun fibers in a tubular scaffold were randomly and circumferentially located toward the inner and outer surfaces. Complete recovery of the esophageal mucosa was confirmed by endoscopic analysis and SEM. Esophagogastroduodenoscopy and computed tomography also showed that there were no signs of leakage or stricture and that there was a normal lumen with complete epithelialization. Significant regeneration of the mucosal layer was observed by keratin-5 immunostaining. Alpha-smooth muscle actin immunostaining showed significantly greater esophageal muscle regeneration at 12 months than at 6 months. Custom-designed bioreactor cultured electrospun polyurethane scaffolds can be a promising approach for esophageal tissue engineering.

Development of Bio-artificial Esophageal Tissue Engineering Utilization for Circumferential Lesion Transplantation: A Narrative Review.

The esophagus is the gastrointestinal tract’s primary organ that transfers bolus into the stomach with peristaltic motion. Therefore, its lesions cause a significant disturbance in the nutrition and digestive system. Esophageal disease treatment sometimes requires surgical procedures that involve removal and circumferential full-thickness replacement. Unlike other organs, the esophagus has a limited regeneration ability and cannot be transplanted from donors. There are various methods of restoring the esophageal continuity; however, they are associated with certain flaws that lead to a non-functional recovery. As an exponentially growing science, tissue engineering has become a leading technique for the development of tissue replacement to repair damaged esophageal segments. Scaffold plays a significant role in the process of tissue engineering, as it acts as a template for the regeneration of growing tissue. A variety of scaffolds have been studied to replace the esophagus. Due to the many tissue quality challenges, the results are still inadequate and need to be improved. The success of esophageal tissue regeneration will finally depend on the scaffold’s capability to mimic natural tissue properties and provide a qualified environment for regeneration. Thereby, scaffold fabrication techniques are fundamental. This article reviews the recent developments in esophageal tissue engineering for the treatment of circumferential lesions based on scaffold biomaterial engineering approaches.

Fluid dynamics characterisation of a rotating bioreactor for tissue engineering.

Biological scaffolds composed of extracellular matrix (ECM) derived from decellularised tissue are increasingly used in regenerative medicine. In this project, a flow perfusion bioreactor (the rotary cell culture system (RCCS), commercially available from Synthecon (Houston, TX)) is used in order to obtain some esophageal extracellular matrix. A theoretical mechanical characterisation of this experimental set-up is provided. Due to the combination of rotation and perfusion, some spiral Poiseuille flow is created inside the tubular esophagus. In a transverse section, a particle (or cell) experiences simultaneously gravitational, Archimedes, centrifugal, Coriolis, and drag forces. In a frame of reference rotating with angular velocity ω, the particle follows a periodic nearly circular path in the clockwise direction, associated with a very slow centrifugal drift towards the esophagus wall. It appears that moderate perfusion rate and rotation speed (ω < 20 rpm and Q < 30 ml/min) are appropriate experimental conditions for esophagus tissue engineering using the RCCS Synthecon bioreactor.

Development and Prospect of Esophageal Tissue Engineering.

Currently, patients with esophageal cancer, especially advanced patients, usually use autologous tissue for esophageal alternative therapy. However, an alternative therapy is often accompanied by serious complications such as ischemia and leakage, which seriously affect the prognosis of patients. Tissue engineering has been widely studied as one of the ideal methods for the treatment of esophageal cancer. In view of the complex multi-layer structure of the natural esophagus, how to use the tissue engineering method to design the scaffold with structure and function matching with the natural tissue is the principle that the tissue engineering method must follow. This article will analyze and summarize the construction methods, with or without cells, and repair effects of single-layer scaffold and multi-layer scaffold. Especially in the repair of full-thickness and circumferential esophageal defects, the flexible design method and the binding force between the layers of the scaffold are very important. In short, esophageal tissue engineering technology has broad prospects and plays a more and more important role in the treatment of esophageal diseases.

Monitoring tissue engineered constructs and protocols with laboratory-based x-ray phase contrast tomography

Tissue engineering (TE) aims to generate bioengineered constructs which can offer a surgical treatment for many conditions involving tissue or organ loss. Construct generation must be guided by suitable assessment tools. However, most current tools (e.g. histology) are destructive, which restricts evaluation to a single-2D anatomical plane, and has no potential for assessing constructs prior to or following their implantation. An alternative can be provided by laboratory-based x-ray phase contrast computed tomography (PC-CT), which enables the extraction of 3D density maps of an organ's anatomy. In this work, we developed a semi-automated image processing pipeline dedicated to the analysis of PC-CT slices of oesophageal constructs. Visual and quantitative (density and morphological) information is extracted on a volumetric basis, enabling a comprehensive evaluation of the regenerated constructs. We believe the presented tools can enable the successful regeneration of patient-specific oesophagus, and bring comparable benefit to a wide range of TE applications. Statement of significancePhase contrast computed tomography (PC-CT) is an imaging modality which generates high resolution volumetric density maps of biological tissue. In this work, we demonstrate the use of PC-CT as a new tool for guiding the progression of an oesophageal tissue engineering (TE) protocol. Specifically, we developed a semi-automated image-processing pipeline which analyses the oesophageal PC-CT slices, extracting visual and quantitative (density and morphological) information. This information was proven key for performing a comprehensive evaluation of the regenerated constructs, and cannot be obtained through existing assessment tools primarily due to their destructive nature (e.g. histology). This work paves the way for using PC-CT in a wide range of TE applications which can be pivotal for unlocking the potential of this field.

Esophagus tissue engineering: from decellularization to in vivo recellularization in two sites

To produce an esophageal scaffold with suitable features and evaluate the result of in vivo cell seeding after its implantation in the omentum and near its original anatomical position in the rat model. The esophagus of twelve rats were resected, cannulated, and decellularized via a peristaltic pump. After confirmation of decellularization and preservation of extracellular matrix, decellularized scaffolds were implanted either in the abdominal cavity (group I, n = 6) or cervical area (group II, n = 6). Histological evaluations were performed after 3 and 6months of implantation. The results of histological evaluations, scanning electron microscopy, and the tensile test confirmed the maintenance of extracellular matrix and removal of all cellular constituents. At the time of biopsy, no evidence of inflammation was detected and the implanted scaffolds appeared normal. Histopathological evaluations of implanted tissues revealed that undifferentiated cells were seen in scaffolds of all follow-ups in both groups. Epithelial cell seeding was more advanced in biopsies of group II obtained after 6months of operation and was accompanied by angiogenesis in surrounding adventitia. It seems that the implantation of scaffold near its original place may have an important role in further cell seeding. This method may be surpassing in comparison with traditional implantation techniques for perfecting esophageal transplantation.

3D Electrospun Synthetic Extracellular Matrix for Tissue Regeneration

Electrospinning is considered the most versatile micro‐/nanofiber fabrication technology. The electrospun fibers hold high surface area, desired mechanical properties, controlled topography, as well as the ease of biochemical functionalization. The 3D electrospun fibrous structures closely mimic the hierarchical architecture and fibrous features of the extracellular matrices (ECM), which greatly contribute to biomaterials design to stimulate tissue regeneration. Herein, the recent advances in electrospinning technology for 3D production of ECM‐mimicking biomaterial scaffolds are systematically summarized and the applications in neural, cardiac, bone, skin, and vascularized tissue regeneration are thoroughly discussed. Challenges and future scopes related to each field of tissue regeneration are discussed after each subsection. A few examples of liver, kidney, esophageal tissue engineering are also discussed. Finally, the key challenge in the cost‐effective upscale of the electrospinning technique to mature and prevalent industrial applications is outlined. Herein, a systematic, thorough summary of the recent evolutions in electrospinning and its emerging applications for a broad range of tissue regenerations is provided.

A narrative review of esophageal tissue engineering and replacement: where are we?

Long-gap esophageal defects, whether congenital or acquired, are very difficult to manage. Any significant surgical peri-esophageal dissection that is performed to allow for potential stretching of two ends of a defect interrupts the esophageal blood supply and leads to complications such as leak and stricture, even in the youngest, healthiest patients. The term “congenital” applied to these defects refers mainly to long-gap esophageal atresia (LGA). Causes of acquired long-segment esophageal disruption include recurrent leaks and fistulae after primary repair, refractory GERD, caustic ingestions, cancer, and strictures. 5,000–10,000 patients per year in the US require esophageal replacement. Gastric, colonic, and jejunal pull-up surgeries are fraught with high rates of both short and long term complications thus creating a space for a better option. Since the 1970’s many groups around the world have been unsuccessfully attempting esophageal replacement with tissue-engineered grafts in various animal models. But, recent advances in these models are now combining novel technologic advances in materials bioscience, stem-cell therapies, and transplantation and are showing increasing promise to human translational application. Transplantation has been heretofore unsuccessful, but given modern improvements in transplant microsurgery and immunosuppressive medications, pioneering trials in animal models are being undertaken now. These rapidly evolving medical innovations will be reviewed here.

Esophagus Decellularization.

In pathologies of the esophagus such as esophageal atresia, cancers and caustic injuries, methods for full thickness esophageal replacement require the sacrifice of healthy intra-abdominal organs such as the stomach and the colon. These methods are associated with high morbidity, mortality and poor functional results. The reconstruction of an esophageal segment by tissue engineering (TE) could answer this problem. For esophageal TE, this approach has been explored mainly by a combination of matrices and cells. In this chapter, we will discuss the studies on full organ esophageal decellularization, including the animal models, the methods of decellularization and recellularization.

Evaluation of Bilayer Silk Fibroin Grafts for Tubular Esophagoplasty in a Porcine Defect Model.

Surgical reconstruction of tubular esophageal defects with autologous gastrointestinal segments is the gold standard treatment to replace damaged or diseased esophageal tissues. Unfortunately, this approach is associated with adverse complications, including dysphagia, donor-site morbidity, and in some cases patient death. Bilayer silk fibroin (BLSF) scaffolds were investigated as alternative, acellular grafts for tubular esophagoplasty in a porcine defect model for 3 months of implantation. Adult Yucatan mini-swine (n = 5) were subjected to esophageal reconstruction with tubular BLSF grafts (2 cm in length) in combination with transient esophageal stenting for 2 months followed by a 1-month period, where the graft site was unstented. All animals receiving BLSF grafts survived and were capable of solid food consumption, however strictures were noted at graft regions in 60% of the experimental cohort between 2 and 3 months postop and required balloon dilation. In addition, fluoroscopic analysis showed peristaltic function in only 1/5 neotissues. Following swine harvest at 3 months, ex vivo tissue bath evaluations revealed that neoconduits exhibited contractile responses to carbachol, electric field stimulation, and KCl, whereas sodium nitroprusside and isoproterenol induced relaxation effects. Histological (Masson's Trichrome) and immunohistochemical analyses of regenerated tissue conduits showed a stratified, squamous epithelium expressing pan-cytokeratins buttressed by a vascularized lamina propria containing a smooth muscle-rich muscularis mucosa surrounded by a muscularis externa. Neuronal density, characterized by the presence of synaptophysin-positive boutons, was significantly lower in neotissues in comparison to nonsurgical controls. BLSF scaffolds represent a promising platform for the repair of tubular esophageal defects, however improvements in scaffold design are needed to reduce the rate of complications and improve the extent of constructive tissue remodeling. Impact statement The search for a superior "off-the-shelf" scaffold capable of repairing tubularesophageal defects as well as overcoming limitations associated with conventional autologous gastrointestinal segments remains elusive. The purpose of this study was to investigate the performance of an acellular, bilayer silk fibroin graft (BLSF) for tubular esophagoplasty in a porcine model. Our results demonstrated that BLSF scaffolds supported the formation of tubular neotissues with innervated, vascularized epithelial and muscular components capable of contractile and relaxation responses. BLSF scaffolds represent a promising platform for esophageal tissue engineering.

Esophageal regenerative therapy using cell sheet technology.

We have been conducting research on esophageal regenerative therapy using cell sheet technology. In particular, in the endoscopic field, we have pushed forward clinical research on endoscopic transplantation of cultured autologous oral mucosal epithelial cell sheets to esophageal ulcer after endoscopic submucosal dissection (ESD). We started research in this direction using animal models in 2004 and performed clinical research in 2012 in collaboration with Nagasaki University and Karolinska Institute. Although in full-circumferential cases it was difficult to prevent esophageal stricture after ESD, there were no complications and stricture could be suppressed. The cell sheet technology is still in its infancy. However, we are convinced that it has a high potential for application in various areas of gastrointestinal science. In this review, we focus on the pre-clinical and clinical trial results obtained and on the theoretical aspects of (1) stricture prevention, (2) esophageal tissue engineering research, and (3) endoscopic transplantation, and review the esophageal regenerative therapy by cell sheet technology.

Tissue-Engineered Graft for Circumferential Esophageal Reconstruction in Rats.

The use of biocompatible materials for circumferential esophageal reconstruction is a technically challenging task in rats and requires an optimal implant technique with nutritional support. Recently, there have been many attempts at esophageal tissue engineering, but the success rate has been limited due to difficulty in early epithelization in the special environment of peristalsis. Here, we developed an artificial esophagus that can improve the regeneration of the esophageal mucosa and muscle layers through a two-layered tubular scaffold, a mesenchymal stem cell-based bioreactor system, and a bypass feeding technique with modified gastrostomy. The scaffold is made of polyurethane (PU) nanofibers in a cylindrical shape with a three-dimensional (3D) printed polycaprolactone strand wrapped around the outer wall. Prior to transplantation, human-derived mesenchymal stem cells were seeded into the lumen of the scaffold, and bioreactor cultivation was performed to enhance cellular reactivity. We improved the graft survival rate by applying surgical anastomosis and covering the implanted prosthesis with a thyroid gland flap, followed by temporary nonoral gastrostomy feeding. These grafts were able to recapitulate the findings of initial epithelialization and muscle regeneration around the implanted sites, as demonstrated by histological analysis. In addition, increased elastin fibers and neovascularization were observed in the periphery of the graft. Therefore, this model presents a potential new technique for circumferential esophageal reconstruction.

SIS/aligned fibre scaffold designed to meet layered oesophageal tissue complexity and properties

With donor organs not readily available, the need for a tissue-engineered oesophagus remains high, particularly for congenital childhood conditions such as atresia. Previous attempts have not been successful, and challenges remain. Small intestine submucosa (SIS) is an acellular matrix material with good biological properties; however, as is common with these types of materials, they demonstrate poor mechanical properties. In this work, electrospinning was performed to mechanically reinforce tubular SIS with polylactic-co-glycolic acid (PLGA) nanofibres. It was hypothesised that if attachment could be achieved between the two materials, then this would (i) improve the SIS mechanical properties, (ii) facilitate smooth muscle cell alignment to support directional growth of muscle cells and (iii) allow for the delivery of bioactive molecules (VEGF in this instance).Through a relatively simple multistage process, adhesion between the layers was achieved without chemically altering the SIS. It was also found that altering mandrel rotation speed affected the alignment of the PLGA nanofibres. SIS-PLGA scaffolds performed mechanically better than SIS alone; yield stress improvement was 200% and 400% along the longitudinal and circumferential directions, respectively. Smooth muscle cells cultured on the aligned fibres showed resultant unidirectional alignment. In vivo the SIS-PLGA scaffolds demonstrated limited foreign body reaction judged by the type and proportion of immune cells present and lack of fibrous encapsulation. The scaffolds remained intact at 4 weeks in vivo, and good cellular infiltration was observed. The incorporation of VEGF within SIS-PLGA scaffolds increased the blood vessel density of the surrounding tissues, highlighting the possible stimulation of endothelialisation by angiogenic factor delivery. Overall, the designed SIS-PLGA-VEGF hybrid scaffolds might be used as a potential matrix platform for oesophageal tissue engineering. In addition to this, achieving improved attachment between layers of acellular matrix materials and electrospun fibre layers offers the potential utility in other applications. Statement of SignificanceBecause of its multi-layered nature and complex structure, the oesophagus tissue poses several challenges for successful clinical grafting. Therefore, it is promising to utilise tissue engineering strategies to mimic and form structural compartments for its recovery. In this context, we investigated the use of tubular small intestine submucosa (SIS) reinforced with polylactic-co-glycolic acid (PLGA) nanofibres by using electrospinning and also, amongst other parameters, the integrity of the bilayered structure created. This was carried out to facilitate smooth muscle cell alignment, support directional growth of muscle cells and allow the delivery of bioactive molecules (VEGF in this study). We evaluated this approach by using in vitro and in vivo models to determine the efficacy of this new system.

Characterization of silver nanoparticle-modified decellularized rat esophagus for esophageal tissue engineering: Structural properties and biocompatibility

Decellularized esophageal matrices are ideal scaffolds for esophageal tissue engineering. Unfortunately, in order to improve transplantation possibilities, they require modification to reduce their degradation rate and immunogenicity. To date, no modifying agent has been approved to overcome these limitations. The objective of this study was to evaluate the ability of silver nanoparticles (AgNPs) to improve the structural stability and biocompatibility of decellularized rat esophagi. AgNPs have the advantage over currently used agents in that they bind with collagen fibers in a highly ordered manner, via non-covalent binding mechanisms forming multiple binding sites, while other agents provide only two-point connections between collagen molecules. Rat esophagi were decellularized, loaded with 5μg/mL of AgNPs (100nm), and then treated with an immobilization-complex buffer composed of ethyl carbodiimide hydrochloride and N-hydroxysuccinimide (EDC/NHS). Then, they were evaluated in terms of ultra-structural morphology, water uptake, invitro resistance to enzymatic and thermal degradation, indentation strength, invitro anti-calcification, cytocompatibility with rat bone marrow derived stromal cells (rat-BMSCs), angiogenic properties, and invivo biocompatibility, and compared to scaffolds modified using glutaraldehyde and EDC/NHS complex buffer alone. AgNP-modified scaffolds showed an improved ultrastructure, good water uptake, and considerable resistance against invitro degradation and indentation, and a high resistance against invitro calcification. Moreover, they were cytocompatible for allogeneic rat-BMSCs. Additionally, AgNPs did not alter the angiogenic properties of the modified scaffolds and decreased host immune responses after their subcutaneous implantation. The structural properties and biocompatibility of decellularized esophageal matrices could be improved by conjugation with AgNPs.

Biological properties of a bionic scaffold for esophageal tissue engineering research

Polyurethane is a good matrix material with wide application prospects in tissue engineering because of its adjustable and mechanical properties. A novel biodegradable crosslinked poly(ester urethane) (CPU) with flexible poly(caprolactone) (PCL) and hydrophilic poly(ethylene glycol) (PEG) components has been synthesized using a ferric iron catalyst in our laboratory. In the present study, to promote the interaction between the CPU material and cells, the material was superficially modified by silk fibroin (SF) grafting using an aminolysis and glutaraldehyde crosslinking method to achieve a biocompatible material, CPU-SF. Considering the esophageal-specific architecture, three types of scaffolds were fabricated. S1 was a CPU-SF channel (200 μm in diameter and 30 μm in depth with 30 μm of wall thickness) to support muscle regeneration; S2 was the decellularized matrix of the esophageal mucosa/submucosa obtained by enzyme treatment; and S3 was a combination of S1 and S2, aiming to promote esophageal regeneration with histological structure and function. The biological properties and functions of the materials and scaffolds were investigated by qualitative and quantitative analyses using scanning electron microscopy, immunofluorescence staining, cell adhesion and proliferation measurements, and western blotting technology. The results showed that esophageal smooth muscle cells (SMCs) and epithelial cells (ECs) were very well supported by the scaffolds. In particular, SMCs exhibited guided directional growth and ECs infiltrated the acellular mucosa with retained biological functions when co-cultured on the composite scaffold S3. These findings suggest that the composite bionic scaffold will be a good alternative for esophageal replacement.

A biologically inspired hierarchical PCL/F127 scaffold for esophagus tissue repair

Specific structures of esophagus play an important role in specific functions. However, current esophageal tissue engineering scaffolds replicate them poorly. To address this issue, the objective of this study is to fabricate a hierarchical PCL/F127 scaffold inspired by the natural esophageal structure. The hierarchical scaffold consists of aligned fibers in micro-size and thin film with nano-sized pores through combining E-jetting and E-spraying. The aligned fibers of scaffold guide the orientation and induce the elongation of fibroblasts, mimicking the uniformly oriented esophageal muscles. Furthermore, the film functioned as a protective barrier to replicate the esophageal mucosa. Meanwhile, the film also increases cell adhesion area, hence, improving cell proliferation. These two features of the fabricated hierarchical scaffold mimic the structure of natural esophagus. Moreover, fabricated hierarchical scaffold possesses comparable mechanical properties to natural esophagus. These results prove the potential of fabricated scaffold for esophagus tissue repair.

SIS/Aligned Fibre Scaffold Designed to Meet Layered Oesophageal Tissue Complexity and Properties

With donor organs not readily available the need for a tissue engineered oesophagus remains high particularly for congenial childhood conditions such as atresia. Previous attempts have not been very successful and challenges remain to be overcome. Small intestine submucosa (SIS) is an a cellular matrix material with good biological properties though, as with these materials, demonstrably poor mechanical properties. In this work electrospinning was used to mechanically reinforce a unique tubular SIS with PLGA nanofibers. It was hypothesised that if attachment could be achieved between the two materials than this would (i) improve the SIS's mechanical properties, (ii) facilitate smooth muscle cell alignment to support directional growth of muscle cells and potentially restore contractility and (iii) allow for the delivery of bioactive molecules (VEGF in this instance). Through a multistage process adhesion between the layers was achieved without chemically altering the SIS. It was also found that altering mandrel rotational speed affected the alignment of the PLGA nanofibers.SIS-PLGA scaffolds performed mechanically better than SIS alone; yield stress improvement was 200% and 400% along the longitudinal and circumferential direction, respectively (greatest with highly aligned fibres produced at 5000 rpm). Smooth muscle cells cultured on the aligned fibres showed resultant unidirectional alignment. In vivo the SIS-PLGA scaffolds demonstrated relatively limited foreign body reaction judged by the type and proportion of immune cells present and lack of fibrous encapsulation. The scaffolds remained intact at 4 weeks which is required for a structural tissue engineering matrix and obtained good cellular infiltration. The incorporation of VEGF within SIS-PLGA scaffolds increased the blood vessel density of the surrounding tissues, highlighting the possible stimulation of endothelialisation by angiogenic factor delivery. Overall, the designed SIS-PLGA-VEGF hybrid scaffolds might be used as a potential matrix platform for oesophageal tissue engineering. In addition to this, achieving improved attachment between layers of a cellular matrix materials and electrospun fibres layers does possess the potential to be applied to other applications.

Pluronic F127 blended polycaprolactone scaffolds via e-jetting for esophageal tissue engineering.

Several attempts have been made to fabricate esophageal tissue engineering scaffolds. However, most of these scaffolds possess randomly oriented fibres and uncontrollable pore sizes. In order to mimic the native esophageal tissue structure, electro-hydrodynamic jetting (e-jetting) was used in this study to fabricate scaffolds with aligned fibres and controlled pore size. A hydrophilic additive, Pluronic F127 (F127), was blended with polycaprolactone (PCL) to improve the wettability of the scaffolds and hence the cell adhesion. PCL/F127 composite scaffolds with different weight ratios (0-12%) were fabricated. The wettability, phase composition, and the mechanical properties of the fabricated scaffolds were investigated. The results show that the e-jetted scaffolds have controllable fibres orientated in two perpendicular directions, which are similar to the human esophagus structure and suitable pore size for cell infiltration. In addition, the scaffolds with 8% F127 exhibited better wettability (contact angle of 14°) and an ultimate tensile strength (1.2 MPa) that mimics the native esophageal tissue. Furthermore, primary human esophageal fibroblasts were seeded on the e-jetted scaffolds. PCL/F127 scaffolds showed enhanced cell proliferation and expression of the vascular endothelial growth factor (VEGF) compared to pristine PCL scaffolds (1.5- and 25.8- fold increase, respectively; P < 0.001). An in vitro wound model made using the PCL/F127 scaffolds showed better cell migration than the PCL scaffolds. In summary, the PCL/F127 e-jetted scaffolds offer a promising strategy for the esophagus tissue repair.

Esophageal tissue engineering: from bench to bedside.

For various esophageal diseases, the search for alternative techniques for tissue repair has led to significant developments in basic and translational research in the field of tissue engineering. Applied to the esophagus, this concept is based on the in vitro combination of elements judged necessary for in vivo implantation to promote esophageal tissue remodeling. Different methods are currently being explored to develop substitutes using cells, scaffolds, or a combination of both, according to the severity of lesions to be treated. In this review, we discuss recent advances in (1) cell sheet technology for preventing stricture after extended esophageal mucosectomy and (2) full-thickness circumferential esophageal replacement using tissue-engineered substitutes.