Error-prone PCR Research Articles

The inhibitory mechanism of Hal3 on the yeast Ppz1 phosphatase: A mutagenesis analysis

The Ser/Thr protein phosphatase (PPase) Ppz1 is an enzyme related to the ubiquitous type-1 PPases (PP1c) but found only in fungi. It is regulated by an inhibitory subunit, Hal3, which binds to its catalytic domain. Overexpression of Ppz1 is highly toxic for yeast cells, so its de-regulation has been proposed as a target for novel antifungal therapies. While modulation of PP1c by its many regulatory subunits has been extensively characterized, the manner by which Hal3 controls Ppz1 remains unknown. We have used error-prone PCR mutagenesis to construct a library of Ppz1 variants and developed a functional assay to identify mutations affecting the binding or/and the inhibitory capacity of Hal3. We have characterized diverse Ppz1 mutated versions in vivo and in vitro and found that, although they were clearly refractory to Hal3 inhibition, none of them exhibited significant reduction in Hal3 binding. Mapping the mutations strengthened the notion that Hal3 does not interact with Ppz1 through its RVxF-like motif (found in most PP1c regulators). In contrast, the most relevant mutations mapped to a conserved α-helix region used by mammalian Inhibitor-2 to regulate PP1c. Therefore, modulation of PP1c and Ppz1 by their subunits likely differs, but could share some structural features.

Improvement of enzyme activity and soluble expression of an alkaline protease isolated from oil-polluted mud flat metagenome by random mutagenesis.

A new protease gene (pro1437)was separated from an oil-polluted Mud flat metagenomic library. Pro1437 belongs to a peptidase M48 superfamily according to the results of sequence analysis, and it showed very low identities compared to other known proteases or peptidases. The error-prone PCR was used to introduce random mutations and improve the expression of pro1437. After two rounds of mutagenesis and screening, a mutant (Pro2T21) with a 6.6-fold higher activity and a 4.8-fold higher expression level than Pro1437 was obtained. Sequence analysis found three amino acid substitutions (A54V, L192H, F224L) in Pro2T21. 3D structure modelling analysis indicated A54V and L192H probably played a crucial role in the improvement of enzymatic activity and soluble expression level of Pro2T21. Furthermore, Pro2T21opti displayed a 5.8-fold higher expression level than the wild type under optimal pH 8.0 at 50°C after codon-optimization. Also, Pro2T21opti represented robust compatibility with several popular laundry detergents, and blood stains on white cloth pieces were completely washed away when endogenous protease-inactivated Tide and Pro2T21opti were used together. Therefore, Pro2T21opti has great potential for use as an additive in detergents after further study.

Genetic determinant of Bacillus pumilus lipase lethality and its application as positive selection cloning vector in Escherichia coli

Positive selection vectors carry genes that upon expression produce proteins that cause host cell deaths. Insertion of foreign DNA fragments within the ORF of the gene disrupts the lethal effect of the expressed protein. This study described the cloning of Family I.4 Bacillus pumilus lipase gene whose expressed protein is toxic and lethal to Escherichia coli JM109 (DE3) cells. The determinant of toxicity was identified through Error-prone PCR to be the nature of amino acid residue resident at position 28 of the mature lipase protein. The presence of Thr/Ser28 within the mature lipases of B. pumilus and B. licheniformis resulted in lethality to E. coli cells. However, the Thr28Ala or Thr28Gly mutations relieved the lethal phenotype of mature Family I.4 Bacillus lipases. The toxic effect of the expressed mature B. pumilus lipase protein was exploited in the development of a positive selection cloning vector. The B. pumilus lipase gene was synthesised to contain 13 unique silent restriction sites within the ORF, and placed under the regulation of T7 promoter of the pET expression system. Insertional inactivation of the gene's toxic protein was achieved by cloning DNA fragments of different sizes within the designed multiple cloning sites. The toxic effect of the lipase protein was disrupted indicating the potential of the gene for application in suicidal positive selection cloning vectors. The results revealed that protein expression and engineering studies aimed at optimal production of mature Family I.4 Bacillus lipases in E. coli should take into consideration the nature of amino acid 28 resident.

A novel constructed SPT15 mutagenesis library of Saccharomyces cerevisiae by using gTME technique for enhanced ethanol production

During the last few years, the global transcription machinery engineering (gTME) technique has gained more attention as an effective approach for the construction of novel mutants. Genetic strategies (molecular biology methods) were utilized to get mutational for both genes (SPT15 and TAF23) basically existed in the Saccharomyces cerevisiae genome via screening the gTME approach in order to obtain a new mutant S. cerevisiae diploid strain. The vector pYX212 was utilized to transform these genes into the control diploid strain S. cerevisiae through the process of mating between haploids control strains S. cerevisiae (MAT-a [CICC 1374]) and (MAT-α [CICC 31144]), by using the oligonucleotide primers SPT15-EcoRI-FW/SPT15-SalI-RV and TAF23-SalI-FW/TAF23-NheI-RV, respectively. The resultant mutants were examined for a series of stability tests. This study showed how strong the effect of using strategic gTME with the importance of the modification we conducted in Error Prone PCR protocol by increasing MnCl2 concentration instead of MgCl2. More than ninety mutants we obtained in this study were distinguished by a high level production of bio-ethanol as compared to the diploid control strain.

Impacts of amino acid substitutions in fungal cytochrome P450 monooxygenase (CYP57B3) on the effective production of 3΄-hydroxygenistein.

Aspergillus oryzae cytochrome P450 monooxygenase (CYP57B3) is capable of catalyzing hydroxylation of genistein to produce 3΄-hydroxygenistein. Because hydroxylated derivatives of genistein, including 3΄-hydroxygenistein, exhibit various pharmacological activities, CYP57B3 would potentially be useful as a biocatalyst in the pharmaceutical field. We therefore performed random mutagenesis of CYP57B3 to improve its catalytic activities for genistein. Random mutations were introduced by error-prone PCR into CYP57B3, resulting in construction of a library of mutants. From 2000 mutants, we isolated one with a triple mutation in CYP57B3, resulting in three amino acid substitutions (V138I, S243N and V463F). The altered protein, designated CYP57B3-mut, had a high level of activity for the production of 3΄-hydroxygenistein from genistein. In bioconversion reactions, Saccharomyces cerevisiae expressing CYP57B3-mut showed 14-fold higher production of 3΄-hydroxygenistein than that of wild-type CYP57B3. In vitro kinetic analysis revealed that Km values of wild-type and CYP57B3-mut were 14.6× 103 ± 2.7× 103 μM and 15.7±1.0 μM, respectively. These results suggest that the affinity of CYP57B3 for genistein could be dramatically improved by the alterations of V138, S243 and V463 in CYP57B3.

Are Directed Evolution Approaches Efficient in Exploring Nature’s Potential to Stabilize a Lipase in Organic Cosolvents?

Despite the significant advances in the field of protein engineering, general design principles to improve organic cosolvent resistance of enzymes still remain undiscovered. Previous studies drew conclusions to engineer enzymes for their use in water-miscible organic solvents based on few amino acid substitutions. In this study, we conduct a comparison of a Bacillus subtilis lipase A (BSLA) library—covering the full natural diversity of single amino acid substitutions at all 181 positions of BSLA—with three state of the art random mutagenesis methods: error-prone PCR (epPCR) with low and high mutagenesis frequency (epPCR-low and high) as well as a transversion-enriched Sequence Saturation Mutagenesis (SeSaM-Tv P/P) method. Libraries were searched for amino acid substitutions that increase the enzyme’s resistance to the water-miscible organic cosolvents 1,4-dioxane (DOX), 2,2,2-trifluoroethanol (TFE), and dimethyl sulfoxide (DMSO). Our analysis revealed that 5%–11% of all possible single substitutions (BSLA site-saturation mutagenesis (SSM) library) contribute to improved cosolvent resistance. However, only a fraction of these substitutions (7%–12%) could be detected in the three random mutagenesis libraries. To our knowledge, this is the first study that quantifies the capability of these diversity generation methods generally employed in directed evolution campaigns and compares them to the entire natural diversity with a single substitution. Additionally, the investigation of the BSLA SSM library revealed only few common beneficial substitutions for all three cosolvents as well as the importance of introducing surface charges for organic cosolvent resistance—most likely due to a stronger attraction of water molecules.

Engineering a Bacterial DyP-Type Peroxidase for Enhanced Oxidation of Lignin-Related Phenolics at Alkaline pH

Dye-decolorizing peroxidases (DyPs) are a family of microbial heme-containing peroxidases that show important properties for lignocellulose biorefineries due to their ability to oxidize lignin-related compounds. Directed evolution was used to improve the efficiency of the bacterial PpDyP from Pseudomonas putida MET94 for phenolic compounds. Three rounds of random mutagenesis by error-prone PCR of the ppDyP gene followed by high-throughput screening allow identification of the 6E10 variant showing a 100-fold enhanced catalytic efficiency (kcat/Km) for 2,6-dimethoxyphenol (DMP), similar to that exhibited by fungal lignin peroxidases (∼105 M–1 s–1). The evolved variant showed additional improved efficiency for a number of syringyl-type phenolics, guaiacol, aromatic amines, Kraft lignin, and the lignin phenolic model dimer guaiacylglycerol-β-guaiacyl ether. Importantly, variant 6E10 displayed optimal pH at 8.5, an upshift of 4 units in comparison to the wild type, showed resistance to hydrogen peroxide inacti...

Characterization of a metagenome-derived protease from contaminated agricultural soil microorganisms and its random mutagenesis.

Proteases are typical key enzymes that hydrolyze proteins into amino acids and peptides. Numerous proteases have been studied, but the discovery of metagenome-derived proteases is still significant for both commercial applications and basic research. An unexplored protease gene sep1A was identified by function-based screening from a plasmid metagenomic library derived from uncultured contaminated agricultural soil microorganisms. The putative protease gene was subcloned into pET-32a (+) vector and overexpressed in E. coli BL21(DE3) pLysS, then the recombinant protein was purified to homogeneity. The detailed biochemical characterization of the Sep1A protein was performed, including its molecular characterization, specific activity, pH-activity profile, metal ion-activity profile, and enzyme kinetic assays. Furthermore, the protein engineering approach of random mutagenesis via error-prone PCR was applied on the original Sep1A protein. Biochemical characterization demonstrated that the purified recombinant Ep48 protein could hydrolyze casein. Compared with the original Sep1A protein, the best variant of Ep48 in the random mutagenesis library, with the Gln307Leu and Asp391Gly changes, exhibited 2.62-fold activity at the optimal reaction conditions of 50°C and pH9.0. These results are the first step toward a better understanding of the properties of Sep1A protein. Protein engineering with error-prone PCR paves the way toward the metagenome-derived genes for biotechnological applications.

Inhibition of virulence-promoting disulfide bond formation enzyme DsbB is blocked by mutating residues in two distinct regions

Disulfide bonds contribute to protein stability, activity, and folding in a variety of proteins, including many involved in bacterial virulence such as toxins, adhesins, flagella, and pili, among others. Therefore, inhibitors of disulfide bond formation enzymes could have profound effects on pathogen virulence. In the Escherichia coli disulfide bond formation pathway, the periplasmic protein DsbA introduces disulfide bonds into substrates, and then the cytoplasmic membrane protein DsbB reoxidizes DsbA's cysteines regenerating its activity. Thus, DsbB generates a protein disulfide bond de novo by transferring electrons to the quinone pool. We previously identified an effective pyridazinone-related inhibitor of DsbB enzymes from several Gram-negative bacteria. To map the protein residues that are important for the interaction with this inhibitor, we randomly mutagenized by error-prone PCR the E. coli dsbB gene and selected dsbB mutants that confer resistance to this drug using two approaches. We characterized in vivo and in vitro some of these mutants that map to two areas in the structure of DsbB, one located between the two first transmembrane segments where the quinone ring binds and the other located in the second periplasmic loop of DsbB, which interacts with DsbA. In addition, we show that a mutant version of a protein involved in lipopolysaccharide assembly, lptD4213, is synthetically lethal with the deletion of dsbB as well as with DsbB inhibitors. This finding suggests that drugs decreasing LptD assembly may be synthetically lethal with inhibitors of the Dsb pathway, potentiating the antibiotic effects.

Establishment and application of a modified membrane-blot assay for Rhizomucor miehei lipases aimed at improving their methanol tolerance and thermostability.

Directed evolution has been proved an effective way to improve the stability of proteins, but high throughput screening assays for directed evolution with simultaneous improvement of two or more properties are still rare. In this study, we aimed to establish a membrane-blot assay for use in the high-throughput screening of Rhizomucor miehei lipases (RMLs). With the assistance of the membrane-blot screening assay, a mutant E47K named G10 that showed improved thermal stability was detected in the first round of error-prone PCR. Using G10 as the parent, two variants G10-11 and G10-20 that showed improved thermal stability and methanol tolerance without loss of activity compared to the wild type RML were obtained. The T5060-value of G10-11 and G10-20 increased by 12°C and 6.5°C, respectively. After incubation for 1h, the remaining residual activity of G10-11 and G10-20 was 63.45% and 74.33%, respectively, in 50% methanol, and 15.98% and 30.22%, respectively, in 80% methanol. Thus, we successfully developed a membrane-blot assay that could be used for the high-throughput screening of RMLs with improved thermostability and methanol tolerance. Based on our findings, we believe that our newly developed membrane-blot assay will have potential applications in directed evolution in the future.

Modification of fatty acid selectivity of Candida antarctica lipase A by error-prone PCR

ObjectiveTo generate Candida antarctica lipase A (CAL-A) mutants with modified fatty acid selectivities and improved lipolytic activities using error-prone PCR (epPCR).ResultsA Candida antarctica lipase A mutant was obtained in three rounds of epPCR. This mutant showed a 14 times higher ability to hydrolyze triacylglycerols containing conjugated linoleic acids, and was 12 and 14 times more selective towards cis-9, trans-11 and trans-10, cis-12 isomers respectively, compared to native lipase. Lipolytic activities towards fatty acid esters were markedly improved, in particular towards butyric, lauric, stearic and palmitic esters.ConclusionDirected molecular evolution is an efficient method to generate lipases with desirable selectivity towards CLA isomers and improved lipolytic activities towards esters of fatty acids.

An Activity-Staining Method on Filtration Paper Enables High-Throughput Screening of Temperature-Sensitive and Inactive Mutations of Rice α-Amylase for Improvement of Rice Grain Quality.

α-Amylase is a starch-hydrolyzing enzyme (EC 3.2.1.1) indispensable for germination of cereal seeds, but it is also expressed during the ripening stage. Previous studies demonstrated that the enzyme is activated in developing rice seeds under extremely hot weather and triggers a loss of grain quality by hindering the accumulation of storage starch in the endosperm. Since inactive or, preferably, heat-labile α-amylases are preferable for breeding premium rice, we developed a method for rapid screening of inactive and temperature-sensitive mutants of the enzyme by combining the random mutagenesis by error-prone PCR and an on-filter activity test of the recombinant enzyme expressed by Escherichia coli. This technique was applied to a major α-amylase in the developing seed, Amy3D, and the activity of the isolated mutant enzymes was verified with both the bacteria-expressed recombinant proteins and the extract from the endosperm overexpressing each of them. Then, we identified several substitutions leading to loss of the activity of amino acid residues (Leu28, Asp112, Cys149, Trp201, Asp204, Gly295, Leu300 and Cys342), as well as a variety of heat-sensitive substitutions of Asp83, Asp187 and Glu252. Furthermore, variations of the heat-labile enzymes were created by combining these heat-sensitive mutations. The effects of the respective mutations and their relationship to the structure of the enzyme molecule are discussed.

Improvement of operational stability of Ogataea minuta carbonyl reductase for chiral alcohol production

Directed evolution of enantio-selective carbonyl reductase from Ogataea minuta was conducted to improve the operational stability of the enzyme. A mutant library was constructed by an error-prone PCR and screened using a newly developed colorimetric assay. The stability of a mutant with two amino acid substitutions was significantly higher than that of the wild type at 50°C in the presence of dimethyl sulfoxide. Site-directed mutagenesis analysis showed that the improved stability of the enzyme can be attributed to the amino acid substitution of V166A. The half-lives of the V166A mutant were 11- and 6.1-times longer than those of the wild type at 50°C in the presence and absence, respectively, of 20% (v/v) dimethyl sulfoxide. No significant differences in the substrate specificity and enantio-selectivity of the enzyme were observed. The mutant enzyme converted 60mM 2,2,2-trifluoroacetophenone to (R)-(-)-α-(trifluoromethyl)benzyl alcohol in a molar yield of 71% whereas the conversion yield with an equivalent concentration of the wild-type enzyme was 27%.

Improvement of enzyme activity of β-1,3-1,4-glucanase from Paenibacillus sp. X4 by error-prone PCR and structural insights of mutated residues.

β-1,3-1,4-Glucanase (BGlc8H) from Paenibacillus sp. X4 was mutated by error-prone PCR or truncated using termination primers to improve its enzyme properties. The crystal structure of BGlc8H was determined at a resolution of 1.8Å to study the possible roles of mutated residues and truncated regions of the enzyme. In mutation experiments, three clones of EP 2-6, 2-10, and 5-28 were finally selected that exhibited higher specific activities than the wild type when measured using their crude extracts. Enzyme variants of BG2-6, BG2-10, and BG5-28 were mutated at two, two, and six amino acid residues, respectively. These enzymes were purified homogeneously by Hi-Trap Q and CHT-II chromatography. Specific activity of BG5-28 was 2.11-fold higher than that of wild-type BGwt, whereas those of BG2-6 and BG2-10 were 0.93- and 1.19-fold that of the wild type, respectively. The optimum pH values and temperatures of the variants were nearly the same as those of BGwt (pH 5.0 and 40°C, respectively). However, the half-life of the enzyme activity and catalytic efficiency (k cat/K m) of BG5-28 were 1.92- and 2.12-fold greater than those of BGwt at 40°C, respectively. The catalytic efficiency of BG5-28 increased to 3.09-fold that of BGwt at 60°C. These increases in the thermostability and catalytic efficiency of BG5-28 might be useful for the hydrolysis of β-glucans to produce fermentable sugars. Of the six mutated residues of BG5-28, five residues were present in mature BGlc8H protein, and two of them were located in the core scaffold of BGlc8H and the remaining three residues were in the substrate-binding pocket forming loop regions. In truncation experiments, three forms of C-terminal truncated BGlc8H were made, which comprised 360, 286, and 215 amino acid residues instead of the 409 residues of the wild type. No enzyme activity was observed for these truncated enzymes, suggesting the complete scaffold of the α6/α6-double-barrel structure is essential for enzyme activity.

Droplet-based microfluidic high-throughput screening of heterologous enzymes secreted by the yeast Yarrowia lipolytica

BackgroundDroplet-based microfluidics is becoming an increasingly attractive alternative to microtiter plate techniques for enzymatic high-throughput screening (HTS), especially for exploring large diversities with lower time and cost footprint. In this case, the assayed enzyme has to be accessible to the substrate within the water-in-oil droplet by being ideally extracellular or displayed at the cell surface. However, most of the enzymes screened to date are expressed within the cytoplasm of Escherichia coli cells, which means that a lysis step must take place inside the droplets for enzyme activity to be assayed. Here, we take advantage of the excellent secretion abilities of the yeast Yarrowia lipolytica to describe a highly efficient expression system particularly suitable for the droplet-based microfluidic HTS.ResultsFive hydrolytic genes from Aspergillus niger genome were chosen and the corresponding five Yarrowia lipolytica producing strains were constructed. Each enzyme (endo-β-1,4-xylanase B and C; 1,4-β-cellobiohydrolase A; endoglucanase A; aspartic protease) was successfully overexpressed and secreted in an active form in the crude supernatant. A droplet-based microfluidic HTS system was developed to (a) encapsulate single yeast cells; (b) grow yeast in droplets; (c) inject the relevant enzymatic substrate; (d) incubate droplets on chip; (e) detect enzymatic activity; and (f) sort droplets based on enzymatic activity. Combining this integrated microfluidic platform with gene expression in Y. lipolytica results in remarkably low variability in the enzymatic activity at the single cell level within a given monoclonal population (<5%). Xylanase, cellobiohydrolase and protease activities were successfully assayed using this system. We then used the system to screen for thermostable variants of endo-β-1,4-xylanase C in error-prone PCR libraries. Variants displaying higher thermostable xylanase activities compared to the wild-type were isolated (up to 4.7-fold improvement).Conclusions Yarrowia lipolytica was used to express fungal genes encoding hydrolytic enzymes of interest. We developed a successful droplet-based microfluidic platform for the high-throughput screening (105 strains/h) of Y. lipolytica based on enzyme secretion and activity. This approach provides highly efficient tools for the HTS of recombinant enzymatic activities. This should be extremely useful for discovering new biocatalysts via directed evolution or protein engineering approaches and should lead to major advances in microbial cell factory development.

Enhancement of thermostability of Bacillus subtilis endoglucanase by error-prone PCR and DNA shuffling

The Bacillus subtilis endo-β-1,4-glucanase gene (beg), which encodes the enzyme BEG that comprises 499 amino acid residues, was mutated by error-prone polymerase chain reaction and DNA shuffling to make variants with improved functionalities. The mutated DNAs were transformed into Escherichia coli DH5α, and among the 1370 transformants, a positive clone 8-20 was obtained finally based on a halo assay and thermostability and alkaline tolerance analyses. The mutated enzyme BEG8-20 of clone 8-20 was changed at seven amino acid residues compared to the wild-type enzyme BEGwt: K45E, I102Y, M112V, D226Y, D295E, L423S, and D460G. The optimum temperature and pH of BEG8-20 were nearly the same as those of BEGwt. However, the thermostability of BEG8-20 was increased 1.53-fold (21.4 min vs. 14.0 min) based on the half-life of the residual activity at 70 °C. This increase in enzyme thermostability is advantageous for the hydrolysis of lignocellulosic materials to produce fermentable sugars. In the activity staining experiment, only a truncated smaller enzyme was observed for BEG8-20, whereas two forms, a matured (52 kDa) and a truncated smaller (34.5 kDa) enzyme, were observed for BEGwt owing to proteolytic internal cleavage at the linker region between the 297th and 356th amino acid residues. These results indicate that amino acid substitutions in the mutant enzyme have rendered the protein prone to cleavage at the C-terminal region.

Error-prone PCR mutation of Ls-EPSPS gene from Liriope spicata conferring to its enhanced glyphosate-resistance

Liriope spicata (Thunb.) Lour has a unique LsEPSPS structure contributing to the highest-ever-recognized natural glyphosate tolerance. The transformed LsEPSPS confers increased glyphosate resistance to E. coli and A. thaliana. However, the increased glyphosate-resistance level is not high enough to be of commercial value. Therefore, LsEPSPS was subjected to error-prone PCR to screen mutant EPSPS genes capable of endowing higher resistance levels. A mutant designated as ELs-EPSPS having five mutated amino acids (37Val, 67Asn, 277Ser, 351Gly and 422Gly) was selected for its ability to confer improved resistance to glyphosate. Expression of ELs-EPSPS in recombinant E. coli BL21 (DE3) strains enhanced resistance to glyphosate in comparison to both the LsEPSPS-transformed and -untransformed controls. Furthermore, transgenic ELs-EPSPS A. thaliana was about 5.4 fold and 2-fold resistance to glyphosate compared with the wild-type and the Ls-EPSPS-transgenic plants, respectively. Therefore, the mutated ELs-EPSPS gene has potential value for has potential for the development of glyphosate-resistant crops.

Exploring the thermostable properties of halohydrin dehalogenase from Agrobacterium radiobacter AD1 by a combinatorial directed evolution strategy.

As a crucial factor for biocatalysts, protein thermostability often arises from a combination of factors that are often difficult to rationalize. In this work, the thermostable nature of halohydrin dehalogenase from Agrobacterium radiobacter AD1 (HheC) was systematically explored using a combinatorial directed evolution approach. For this, a mutagenesis library of HheC mutants was first constructed using error-prone PCR with low mutagenesis frequency. After screening approximately 2000 colonies, six mutants with eight mutation sites were obtained. Those mutation sites were subsequently combined by adopting several rounds of iterative saturation mutagenesis (ISM) approach. After four rounds of saturation mutagenesis, one best mutant ISM-4 with a 3400-fold improvement in half-life (t 1/2) inactivation at 65°C, 18°C increase in apparent T m value, and 20°C increase in optimum temperature was obtained, compared to wild-type HheC. To the best of our knowledge, the mutant represents the most thermostable HheC variant reported up to now. Moreover, the mutant was as active as wild-type enzyme for the substrate 1,3-dichloro-2-propanol, and they remained most enantioselectivity of wild-type enzyme in the kinetic resolution of rac-2-chloro-1-phenolethanol, exhibiting a great potential for industrial applications. Our structural investigation highlights that surface loop regions are hot spots for modulating the thermostability of HheC, the residues located at these regions contribute to the thermostability of HheC in a cooperative way, and protein rigidity and oligomeric interface connections contribute to the thermostability of HheC. All of these essential factors could be used for further design of an even more thermostable HheC, which, in turn, could greatly facilitate the application of the enzyme as a biocatalyst.

A Single-Step "Breeding" Generated a Diagnostic Anti-cortisol Antibody Fragment with Over 30-Fold Enhanced Affinity.

Cortisol levels in bodily fluids represent a useful index for pituitary-adrenal function, and thus practical anti-cortisol antibodies are required. We have studied "antibody-breeding" approaches, which involve in vitro evolution of antibodies to improve their antigen-binding performances. Here, we produced an antibody fragment to measure serum cortisol levels with over 30-fold enhanced affinity after single mutagenesis and selection steps. A mouse anti-cortisol antibody, Ab-CS#3, with insufficient affinity for practical use, was chosen as the prototype antibody. A "wild-type" single-chain Fv fragment (wt-scFv; Ka, 3.4×108 M-1) was prepared by bacterial expression of a fusion gene combining the VH and VL genes for this antibody. Then, random point mutations were generated separately in VH or VL by error-prone PCR, and the resulting products were used to assemble scFv genes, which were displayed on filamentous phages. Repeated panning of the phage library identified a mutant scFv (scFv#m1-L10) with an over 30-fold enhanced affinity (Ka 1.2×1010 M-1). Three amino acid substitutions (Cys49Ser, Leu54Pro, and Ser63Gly) were observed in its VL sequence. In a competitive enzyme-linked immunosorbent assay (ELISA), the mutant scFv generated dose-response curves with measuring range ca. 0.03-0.6 ng/assay cortisol, midpoint of which (0.15 ng/assay) was 7.3-fold lower than that of wt-scFv. Although cortisone, 11-deoxycortisol, and prednisolone showed considerable cross-reactivity, the mutant scFv should enable sensitive routine cortisol assays, except for measurement after metyrapone or high-dose of prednisolone administrations. Actually, cortisol levels of control sera obtained with the scFv-based ELISA were in the reference range.

One-Shot In Vitro Evolution Generated an Antibody Fragment for Testing Urinary Cotinine with More Than 40-Fold Enhanced Affinity.

Immunoassays for cotinine, a major nicotine metabolite, in the urine are useful for monitoring the degree of tobacco smoke exposure. However, hybridoma-based anti-cotinine antibodies lack sufficient binding affinity to perform practically sensitive measurements, and thus most cotinine assays still rely on polyclonal antibodies. Here, we describe the generation of a mutant single-chain Fv fragment (scFv) that was used in an enzyme-linked immunosorbent assay (ELISA) to determine urinary cotinine levels in passive smokers. A "wild-type" scFv (scFv-wt) with a Ka value of 2.7 × 107 M-1 (at 4 °C) was prepared by linking the VH and VL domains in a mouse anti-cotinine antibody. "One-shot" random mutagenesis on the scFv-wt gene by error-prone PCR generated mutant scFv genes, which were expressed on phage particles. Repeated panning directed toward mutants with slower off-rates selected scFv clones that showed improved sensitivity in an ELISA system. One of these mutants (scFv#m1-54) with five amino acid substitutions showed more than a 40-fold enhanced Ka (1.2 × 109 M-1 at 4 °C) and, thus, was used to monitor human urinary cotinine. A limited amount of soluble scFv was reacted with urine specimens (or cotinine standards) at 4 °C for 120 min in microwells on which cotinine residues had been immobilized. The midpoint of the dose-response curves under optimized conditions (0.27 ng/assay) was more than 100-fold lower than the ELISA results obtained using scFv-wt. The limit of detection (8.4 pg/assay) corresponded to 0.17 ng/mL urinary cotinine, which was satisfactorily low for testing the threshold levels for passive smoke exposure. The assay values for volunteers correlated with the values determined using a commercial assay kit. This study evidently showed the potential of a molecular breeding approach, in which simple in vitro evolution might generate superior antibody reagents as cloned proteins, overcoming the limited molecular diversity inherent to conventional immunization-based antibodies.