Erbium Laser Research Articles

Clinical and Radiographic Evaluation of Diode and Er,Cr:YSGG Lasers as an Alternative to Formocresol and Sodium Hypochlorite for Pulpotomy Techniques in Primary Molars: A Randomized Controlled Clinical Trial.

Background Pulpotomy treatment is one of the vital pulp therapies that can play a major role in the preservation of primary teeth until their natural exfoliation. The objective of this current clinical trial was to assess the clinical and radiographical success of diode and Er,Cr:YSGG lasers as a viable alternative to formocresol (FC) and sodium hypochlorite in the primary molar pulpotomies. Materials and methods Sixty primary molars were selected and randomly allocated to four groups. All treatment groups followed the same clinical protocol, except for the techniques used for hemostasis of the pulpotomy sites. In group A, hemostasis was achieved by applying a 1:5 dilution of FC solution, whereas in group B, 3% sodium hypochlorite was applied to achieve hemostasis. In group C, exposure to a diode laser of 940 nm was performed, whereas for group D, erbium laser irradiation with Er,Cr:YSGG laser of 2,780 nm was employed to achieve hemostasis. Radicular pulp stamps were covered with a 2 mm layer of mineral trioxide aggregate (MTA) paste. Stainless steel crowns were utilized for the final restorations of the primary teeth. The clinical and radiographic outcomes were evaluated at the six- and 12-month follow-up intervals. The investigation was registered with the ClinicalTrials.gov Protocol and Registration System (ID: NCT06002646). Results The overall clinical and radiographic success rates of pulpotomy were 92.3% for FC, 89% for sodium hypochlorite, 98.3% for a diode laser, and 98.7% for Er,Cr:YSGG lasers. There were no statistically significant differences among the four groups (p > 0.05). Conclusions Both the diode and Er,Cr:YSGG lasers showed outcomes comparable to those of FC and sodium hypochlorite. Therefore, they could be promising alternatives to primary tooth pulpotomies.

Effect of Er:YAG laser on debonding zirconia and lithium disilicate crowns bonded with 2- and 1-bottle adhesive resin cements.

Erbium-doped yttrium-aluminum-garnet (Er:YAG) laser debonding of zirconia and lithium disilicate restorations is increasingly used for a range of clinical applications. Using rotary instruments to remove such restorations for any purpose has proven to be challenging. Erbium laser has been reported to be a conservative method for removing ceramic restorations. There is little data in the literature about the effect of adhesive resin cement type on the debonding time of the ceramic restoration using the Er:YAG laser. To evaluate and compare the time required for the Er:YAG laser to debond zirconia and lithium disilicate crowns bonded with a 2- and 1-bottle adhesive resin cement systems. Forty extracted premolar teeth were prepared and scanned for milled 40 CAD/CAM crowns. Teeth were randomly assigned into groups (n = 10 per group): 3 mol% yttria-partially stabilized zirconia crowns 3Y-PSZ (G1a) bonded with Panavia™ V5 (2-bottle adhesive resin cement), Zirconia 3Y-PSZ crowns (G1b) bonded with RelyX™ Ultimate (1-bottle adhesive resin cement), and for the lithium disilicate crowns bonded with the two types of cements (G2a, G2b). Each specimen was irradiated with an Er:YAG laser at 335 mJ, 15 Hz, 5.0 W, and 50-ms pulse duration (super short pulse mode). The irradiation time required for crowns to be successfully debonded was recorded for each specimen. Data were statistically analyzed using ANOVA and Tukey HSD post-hoc test (p < 0.05), at the 95 percent level of confidence. The intaglio surface of the debonded crown was analyzed using scanning electron microscopy (SEM). The mean ± standard deviation times needed for crown debonding were 5.75 ± 2.00 min for the G1a group, 4.79 ± 1.20 min for group G1b, 1.69 ± 0.49 min for group G2a, and 1.12 ± 0.17 for group G2b. There was no statistically significant difference in debonding time between the 2- and 1- bottle adhesive resin cement within the groups G1a and b (p = 0.2914), or between groups G2a b (p = 0.7116). A statistically significant difference (p < 0.05) was found between groups G1a and G2a and b and between groups G1b and G2a and b were SEM analysis showed no changes in the microstructure of the ceramic surface after Er:YAG laser irradiation. Zirconia and lithium disilicate restorations can be debonded using Er:YAG lasers in a safe and efficient manner. There is no significant difference in the debonding time between the 2- and 1- bottle adhesive resin cement systems used in this study. Retrieving zirconia and lithium disilicate ceramics can be a challenging process when using diamond rotary instruments. ER:YAG lasers may efficiently debond these ceramics from the tooth structure, independent of the bonding process used for bonding them.

The effectiveness of erbium laser in the treatment of apical periodontitis: results of clinical observation.

This article demonstrates a clinical case of successful therapeutic treatment of a 43-year-old patient diagnosed with chronic granulomatous periodontitis of tooth 2.4 (K04.5). The patient voluntarily signed informed consent to treatment and publication of personal medical information. Repeated endodontic treatment was carried out, including the infilling of the tooth and the formation of the root canal with K-, H-files and the ProTaper system. Distilled water was used as an irrigant. An Er,Cr:YSGG laser with a wavelength of 2780 nm and a power of 1.5 W was used to disinfect the root canals. Clinical and radiological follow-up was carried out after 6 and 12 months based on CBCT data and the periapical COPI. As a result of a 12-month follow-up, complete restoration of the periapical tissues was achieved. Long-term results indicate the effectiveness of repeated endodontic treatment using an Er,Cr:YSGG laser with a wavelength of 2780 nm.

Clinical experience of using a high-intensity erbium laser for the treatment of chronic wounds

Chronic wounds are a common surgical pathology. Some types of laser radiation allow for eff ective debridement of wounds and stimulation of healing processes. High-intensity erbium laser can comprehensively aff ect tissues in all phases of the wound process, leading to accelerated healing of chronic wounds. The aim of the study was to evaluate the eff ectiveness of using high-intensity erbium laser for treating patients with chronic wounds of various origins compared to traditional treatment. Material and methods: An analysis of the treatment of 144 patients with chronic wounds was conducted in two groups. In the 1st group (n = 71), a high-intensity erbium laser and dressings with water-soluble ointments were used. In the 2nd group (n = 73), standard surgical treatment with similar dressings was performed. Results were evaluated using visual assessment of wound defects, planimetry, bacteriological and cytological studies, assessment of procedure tolerability, and pain intensity before and after treatment. Results: рatients in the 1st group showed signs of healing signifi cantly earlier and more frequently achieved complete epithelialization of wounds. Laser treatment contributed to more effective decontamination of wound defects, and signs of tissue regeneration were more frequently observed in cytological images. Patients tolerated erbium laser treatment better than surgical treatment, although pain intensity after treatment did not differ between groups. Conclusion: The study confi rmed the effectiveness of using high-intensity erbium laser for treating chronic wounds. This method can be recommended for use in surgical practice alongside other technical and pharmacological tools.

A regenerative approach for temporomandibular joint repair: An invitro and exvivo study.

Current clinical approaches to regenerate temporomandibular joint (TMJ) articulating cartilage defects only treat the symptoms (i.e. pain and dysfunction) and do not seek to restore joint integrity for long-term relief. Therefore, we investigated a novel self-assembling tissue-engineered cartilage to overcome this significant clinical issue for TMJ regenerative purposes. Examine the maturation of dynamic self-regenerating cartilage (dSRC) using auricular chondrocytes and evaluate a novel combinatorial approach with fractional laser treatment and dSRC implantation for TMJ cartilage repair. A suspension of 107 freshly harvested rabbit ear chondrocytes was cultured under a continuous reciprocating motion to form the dSRC. After 2, 4 and 8 weeks of culture, dSRC samples were stained with H&E, Safranin-O and Toluidine Blue. Immunohistochemistry (IHC) was performed for collagens type I and II. Channels (300-500 μm diameter and 1.2-1.5 mm depth) were created in six freshly harvested condyles using a fractional Erbium laser. Two groups were tested: dSRC in a laser-ablated lesion (experimental) and an empty laser-ablated channel (control). TMJ condyles were cultured for up to 8 weeks and analysed as described above. H&E staining showed a high cell density in dSRC compared to native cartilage. All dSRC groups demonstrated intense Safranin-O staining, indicating high glycosaminoglycan (GAG) production and intense Toluidine Blue staining showed high proteoglycan content. IHC confirmed that dSRC consisted predominantly of collagen type II. The experimental group showed improved cartilage repair at both time points compared to the empty channels. dSRC viability and successful matrix formation were demonstrated invitro. The combination of fractional laser ablation and dSRC implantation enhanced cartilage repair.

The Effect of the Water Flow Rate During Laser Irradiation on the Bond Strength of Glass Fiber Posts

Objective: This study aimed to investigate the effect of the water flow rate during laser irradiation on the bond strength of GFRC posts. Background: Due to the ablation mechanism, water molecules must be present in the target tissue for effective results with erbium lasers. Materials and methods: Sixty glass fiber posts were divided into six equal groups: control groups, sandblasting with 30 μm Al2O3 particles, 9.5% hydrofluoric acid (HF), and three different flow rates (1%, 50%, and 100%) laser groups (n = 10). Resin cement was applied to the surfaces of the fiber posts. Then, 1 mm thick sections were taken from each specimen and micro tensile bond strength test was applied. The data obtained were statistically analyzed by a one-way analysis of variance and Tukey’s HSD test. Results: According to the statistical analysis results, there was a significant difference between the bond strength values of all the groups (P &lt; 0.001). The highest bonding value was obtained in the sandblasted group (12.25 ± 0.38) and the lowest in the control group (5.64 ± 0.6). After sandblasting, the highest value was observed in the laser applied group (10.57 ± 0.64) at 100% flow rate. Conclusions: As the water flow rate decreases in laser applications, the bond strength between the fiber post and resin cement decreases.

Innovative decision making tools using discrete mathematics for stress urinary incontinence treatment.

In this study, we applied graph theory to clinical decision-making for Stress Urinary Incontinence (SUI) treatment. Utilizing discrete mathematics, we developed a system to visually understand the shortest path to the desired treatment outcomes by considering various patient variables. Focusing on women aged 35-50, we examined the effectiveness of Tension-free Vaginal Tape (TVT) surgery and Vaginal Erbium Laser (VEL) treatment for over 15years. The TVT group consisted of 102 patients who underwent surgery using either the Advantage Fit mid-urethral sling system (Boston Scientific Co., MA, USA) or the GYNECARE TVT retropubic system (Ethicon Inc., NJ, USA). The VEL group included 113 patients treated with a non-ablative Erbium: YAG laser (FotonaSmooth™ XS; Fotona d.o.o., Ljubljana, Slovenia), and there were 112 patients in the control group. We constructed a network diagram analyzing the correlations between health, demographic factors, treatment methods, and patient outcomes. By calculating the shortest path using heuristic functions, we identified significant correlations and treatment effects. This approach supports patient decision making by choosing between TVT and VEL treatments based on individual objectives. Our findings provide new insights into SUI treatment, highlighting the value of a data-driven personalized approach for clinical decision-making. This interdisciplinary study bridges the gap between mathematics and medicine, demonstrating the importance of a data-centric approach in clinical decisions.

The Potential of Non-ablative Erbium (YAG) Laser Treatment for Complications After Midurethral Sling Surgery: A Narrative Review.

Midurethral sling (MUS) surgery, using tension-free vaginal tape and transobturator tape, has been widely adopted for the treatment of stress urinary incontinence (SUI). However, postoperative complications, including persistent urinary incontinence, mesh exposure, and pain, have become problematic, and surgical treatments for these complications face challenges, such as invasiveness, treatment-resistant cases, and recurrence. This review provides an overview of the current evidence regarding these complications and the potential of vaginal non-ablative erbium (YAG) laser (VEL) treatment as a minimally invasive option with low risk of complications. Studies have suggested the effectiveness of VEL treatment, performed using devices such as IncontiLase (SP Dynamis; Fotona d.o.o., Ljubljana, Slovenia), for persistent urinary incontinence after MUS surgery, pain following mesh removal, and asymptomatic mesh exposure. VEL treatment is expected to be a new treatment option for complications following MUS surgery; however, further large-scale comparative trials are required to verify its efficacy and safety and to establish criteria for its indications. Appropriate assessment of the indications and provision of sufficient information to patients is important when presenting VEL as a treatment option.

Pre-prosthetic atraumatic laser-assisted mandibular rehabilitation: Er,Cr:YSGG 2780 nm for alveoloplasty and mucocele removal. A case report

Lasers are a popular technology in many areas of dentistry due to their low invasiveness, quick tissue response, and rapid healing time. Mucoceles develop from minor salivary glands, whereas bony exostosis is a prosthodontic challenge that prevents optimal prosthetic management. Scarring, pain, and discomfort are common drawbacks of traditional surgical approaches, which are followed by prolonged postoperative healing. Laser-assisted mandibular rehabilitation is a promising approach with predictable results. The patient complained of severe pain during denture fabrication, as well as a small, painless swelling on the inner aspect of the lower lip. The patient was able to receive the planned complete dentures after undergoing atraumatic laser-assisted removal of mucocele and bone exostosis with an Er,Cr:YSGG (Erbium, chromium-doped, yttrium, scandium, gallium, and garnet) laser treatment at 2780 nm. Both procedures were completed quickly, and there were no postoperative complications to report. Blanching overlying both lesions quickly faded after healing and was replaced by a healthy pink mucosal color; both lesions were monitored until complete healing. The Er,Cr:YSGG effectively ablated and removed both soft and hard tissue lesions with minimal bleeding and pain.

Pre-prosthetic atraumatic laser-assisted mandibular rehabilitation: Er,Cr:YSGG 2780 nm for alveoloplasty and mucocele removal. A case report

Lasers are a popular technology in many areas of dentistry due to their low invasiveness, quick tissue response, and rapid healing time. Mucoceles develop from minor salivary glands, whereas bony exostosis is a prosthodontic challenge that prevents optimal prosthetic management. Scarring, pain, and discomfort are common drawbacks of traditional surgical approaches, which are followed by prolonged postoperative healing. Laser-assisted mandibular rehabilitation is a promising approach with predictable results. The patient complained of severe pain during denture fabrication, as well as a small, painless swelling on the inner aspect of the lower lip. The patient was able to receive the planned complete dentures after undergoing atraumatic laser-assisted removal of mucocele and bone exostosis with an Er,Cr:YSGG (Erbium, chromium-doped, yttrium, scandium, gallium, and garnet) laser treatment at 2780 nm. Both procedures were completed quickly, and there were no postoperative complications to report. Blanching overlying both lesions quickly faded after healing and was replaced by a healthy pink mucosal color; both lesions were monitored until complete healing. The Er,Cr:YSGG effectively ablated and removed both soft and hard tissue lesions with minimal bleeding and pain.

Safety and Efficacy of the Erbium Laser in Debonding Dental Accessories: A Narrative Review.

Objective: This article aims to review the safety and efficacy of the Er:YAG laser in debonding dental accessories. Methods: This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Articles published between 2010 and 2022 on the removal of dental accessories using erbium laser were searched. The selected articles were then classified according to the accessories used: adhesives, brackets, restorations, or implant crowns. Enamel surface roughness, shear bond strength, adhesive remnant index, duration time (t), pulp chamber temperature (T), morphology (M), and other variables were then noted. Results: The dental accessories and adhesives used were described along with the laser parameters used, such as frequency, pulse width, irradiation time, scanning mode, water-air cooling, and other variables. Conclusions: Laser removal using Er:YAG laser of dental accessories such as brackets, crowns, and veneers is fundamentally safe, time-saving, and does not cause damage to the enamel nor the underlying dentin. However, there was no distinct advantage with laser removal seen, such as those residual adhesives of brackets on the tooth surface and temporary adhesives of restorations.

Erbium lasers in apical surgery: a literature overview followed by reporting of clinical findings

Erbium lasers in apical surgery: a literature overview followed by reporting of clinical findings

The Efficiency of Erbium Lasers in the Removal of Root Canal System and Surface Biofilms: A Systematic Review and Meta-Analysis.

Background: Studies have shown positive effects of erbium lasers in removal of biofilms. A review article was required with quantitative data for confirmation of their effects, but there is still no a comprehensive study reviewing their effects based on the root canal and implant surface. This systematic review and meta-analysis was conducted to evaluate the efficiency of erbium lasers in removal of the root canal system and surface biofilms. Methods: Studies were searched with keywords in databases of PubMed, Scopus, Europe PMC, Cochrane Central, Embase, and Web of Science and screened by referees. Data were included based on mean ± standard deviation and size of control and laser groups. Effect sizes were assessed as standardized mean differences and calculated for each study and for the root and dental surface. Laser characteristics and bacteria were considered as moderators. Results: Nineteen articles in the current study comprised 565 samples (283 control samples and 282 laser samples). The analyses showed the significant effects of erbium lasers on bacterial biofilms on the implant surface [-0.496, 95% confidence interval, CI (-0.720 to -0.273); I2 = 26.94; p = 0.029; Q = 13.28] and root canal [-0.551, 95% CI (-0.656 to -0.445); I2 = 23.89; p = 0.031; Q = 10.46]. Results showed that highest efficiency lasers were obtained at higher wavelengths of 2940 nm, 75-100 mJ energy, and 100-150 μsec and <50-Hz pulses. Conclusions: Erbium lasers can be used to remove biofilms on dental implant surfaces and root canal systems and are safe options for untouchable sites in the root canal.

Study on the effect of crystal changes on acid resistance of erbium laser etched enamel surface.

To investigate the mechanism underlying high acid resistance of enamel after erbium laser etching. Forty-five premolars were collected and assigned to three groups. A 4×4×1 mm enamel sample was prepared, the left side was the control side, the right side was the treated side, which was treated with different surface treatments, including 35% phosphoric acid etching, Er:YAG laser etching, and Er,Cr:YSGG laser etching. The hydroxyapatite crystal size on the enamel surface of the samples was observed. The contents of Ca, P, O, F, Cl, C, Mg were detected. The crystallinity of the hydroxyapatite crystal was analyzed. After erbium laser etching, the enamel surface had high hydroxyapatite crystal size, beneficial content of chemical elements and crystallinity. The morphological and composition changes of crystals in the enamel surface after erbium laser etching may be one of the crucial mechanisms underlying the enhancement of acid resistance of enamel after erbium laser etching.

Improved urinary incontinence outcomes following vaginal erbium laser treatment

Improved urinary incontinence outcomes following vaginal erbium laser treatment

A patient with severe acne: therapy perspectives

Acne is a common dermatological disease that peaks between 12 and 25. The tendency of inflammatory elements to appear on the skin, especially the face, leads to psycho-emotional imbalance and significantly reduces the patient’s quality of life. In 95% of cases, the outcome of acne is the formation of cicatricial deformities, the treatment of which often takes years. If inflammatory elements are present, treatment should be aimed at ensuring a long-term remission of the disease, including preventing the formation of new scars.&#x0D; This work aims to determine the efficacy and safety of acne treatment using systemic isotretinoin.&#x0D; The article presents the results of systemic isotretinoin use in severe forms of acne and acne that is resistant to standard treatments based on clinical cases. It was proved that the benefits obtained from isotretinoin usage are much more significant than the possible risk of side effects, especially if the patient’s skin tends to scar. The latest data on the etiology and pathogenesis of cicatricial deformities is presented. A review of modern techniques for the correction of post-acne cicatricial deformities was carried out.&#x0D; Isotretinoin is clinically proven to be highly effective and safety safe for both severe acne.&#x0D; The use of isotretinoin to treat acne is effective and reduces the risk of scarring.

The Influence of Erbium Laser Pretreatment on Dentin Shear Bond Strength and Bond Failure Modes: A Systematic Review and Network Meta-Analysis.

To systematically review in-vitro studies that evaluated the influence of erbium laser pretreatment on dentin shear bond strength (SBS) and bond failure modes. Electronic databases (PubMed, Cochrane Central, Embase, and Web of Science) were searched. Only in-vitro studies involving erbium laser irradiation of the dentin surface and SBS testing of the bonded resin block were included. The three common modes of bond failure (1. adhesive, 2. cohesive, and 3. mixed) were observed and analyzed. The network meta-analysis (NMA) was performed by Stata 15.0 software, the risk of bias was evaluated, and the certainty of the evidence was assessed by the Confidence in Network Meta-analysis (CINeMA). Forty studies with nine pretreatments (1. blank group: BL; 2. phosphoric acid etch-and-rinse: ER; 3. self-etch adhesive: SE; 4. Er:YAG laser: EL; 5. Er,Cr:YSGG laser: ECL; 6. ER+EL; 7. ER+ECL; 8. SE+EL; 9. SE+ECL) were included in this analysis. The NMA of SBS showed that ER+EL [SMD = 0.32, 95% CI (0.11, 0.98)] had the highest SBS next to ER, especially when using one of the 3M ESPE adhesives, followed by EL, ECL, SE and SE+EL. The Ivoclar Vivadent adhesives significantly increased the SBS of the ECL [SMD = 0.37, 95% CI (0.16,0.90)] and was higher than ER+EL [SMD = 0.25,95% CI (0.07,0.85)]. Finally, the surface under the cumulative ranking curve (SUCRA) value indicated that ER+EL (SUCRA = 71.0%) and EL (SUCRA = 62.9%) were the best treatments for enhancing dentin SBS besides ER. ER+EL (SUCRA = 85.3%), ER (SUCRA = 83.7%) and ER (SUCRA = 84.3%) had the highest probability of occurring in adhesive, cohesive and mixed failure modes, respectively. Er:YAG and Er,Cr:YSGG lasers improved dentin SBS compared to the blank group, especially when the acid etch-and-rinse pretreatment was combined with Er:YAG laser. Shear bond strength and failure mode do not appear to be directly related.

Eradication of mature biofilm from the isthmus region using Er, Cr: YSGG Laser as an activator of 2% chlorhexidine gluconate.

Challenges in the root canal system, such as isthmus, may limit the action of endodontic equipment and irrigation solutions, so using laser agitation is recommended to upgrade the removal of microbial biofilm. The objective of this study is to assess the effectiveness of the laser in photon-induced photoacoustic streaming protocol agitation of 2% chlorohexidine gluconate in removing mature biofilm in complex root canal systems. Seventy-five mesial roots of the lower first and second molars were separated and cultivated with Enterococcus faecalis bacteria for 30 days (except for the negative control group samples). The samples were divided into four groups (n=15), one group acted as a positive control, other groups were irrigated with 2% chlorohexidine gluconate, some of them were agitated with a passive ultrasonic device, while the other samples were agitated by an Erbium, chromium-doped yttrium, scandium, gallium, and garnet laser in photon-induced photoacoustic streaming protocol. An atomic force microscope was used as a new method to get the results in the isthmus area; A scanning electron microscope was also used in the study to examine the samples before and after the treatment. Statistical Package for Social Sciences software was used to collect and analyze data, and two-way ANOVA was used to compare the means of the test groups. According to the atomic force microscope and scanning electron microscope analyses, Erbium laser and passive ultrasonic activation groups showed higher antimicrobial efficacy than the syringe irrigation group (p<0.05). According to the study's results, the agitation of chlorohexidine gluconate fluid by Erbium laser in photon-induced photoacoustic streaming at 0.75 W offers better Enterococcus faecalis biofilm removal in the difficult-to-reach areas of lower first and second molars. Key words:Atomic force microscope, 2% chlorhexidine gluconate, Enterococcus faecalis, Erbium, chromium-doped yttrium, scandium, gallium, garnet laser, passive ultrasonic.

Assessment of the Effect of Different Irrigation Protocols on the Penetration of Irrigation Solution into Simulated Lateral Canals (In Vitro Study).

To compare the effectiveness of lateral canal irrigation penetration by conventional needle, passive ultrasonic, sonic endo activator, and Erbium laser (2780nm). A total of 40 palatal roots of human maxillary first molars were collected and instrumented at a working length of 12 mm by an X1-X4 rotary Protaper Next system (Dentsply, Maillefer, Ballaigues, Switzerland) using the crown-down technique. Artificial lateral canals were made at 2, 4, and 6 mm from the apex on mesial and distal sides using an ISO rotary reamer (Dentsply, Maillefer, Ballaigues, Switzerland; #10 for mesial, #08 for distal). The samples were then cleared using methyl salicylate. A solution of black ink and normal saline was used as an irrigant for the root canal. The percentages of the penetration of the ink into the lateral canals were measured using a stereomicroscope (Q-Scope, Arnhem, The Netherlands) with the aid of program Image J. The Tukey test is used to assess the significant difference between intragroup and intergroup comparisons of different thirds, and the T-test is used to assess the significant difference between every two groups and for the mesial and distal sides of each group. The level of significance was set at 0.05. Results showed that none of the activation techniques used resulted in complete lateral canal penetrations; however, on both sides at all thirds, the Erbium laser (2780 nm) achieved the highest results with a highly significant statistical difference (p=0.05) with all other groups, and the least penetration was in the conventional needle group. The size of the lateral canal is a restricting factor for all activation methods; the best results can be achieved by laser. Conventional needles cannot be used alone to disinfect complex canal anatomy; however, passive ultrasonic and sonic endo activator activations can produce comparable results.

The effect of fractional microablative carbon dioxide laser therapy on vaginal atrophy in menopause women: A review

Vaginal atrophy is one of Genitourinary Syndrome of menopause. This condition occurs due to decreased estrogen levels during menopause. Epidemiological data obtained from several countries estimated that up to 50% of post-menopausal women experience symptoms of vaginal atrophy. This paper aims to conduct a systematic review, and this meta-analysis is to analyze the effect of micro ablative fractional CO2 laser therapy on vaginal atrophy in postmenopausal women. Data was collected online from Pubmed-MEDLINE, Scopus, EBSCO, Cambridge Core, ProQuest, Springer Link, Cochrane Library, and ClinicalTrials.gov databases. Tracking will be carried out in May-July 2023. The population of this study is the result of clinical trial research on the effect of microablative fractional CO2 laser therapy on vaginal atrophy in postmenopausal women. Meta-analysis showed that the VHI score was higher after therapy in the group that received micro ablative fractional CO2 laser compared to the group that received sham laser for vaginal atrophy in menopausal women. VAS scores were lower after administration in the group that received microablative fractional CO2 laser compared to the group that received sham laser for vaginal atrophy in menopausal women. The incidence of side effects in the CO2 laser group did not differ from the sham laser group. This study recommends an RCT study was conducted comparing micro ablative fractional CO2 laser compared to other energy-based devices such as erbium laser and radiofrequency on vaginal atrophy in postmenopausal women so that it can be used as a basis for further systematic review research and meta-analysis.