Sedimentation Equilibrium Experiments Research Articles

Methods for the Design and Analysis of Analytical Ultracentrifugation Experiments.

Analytical ultracentrifugation experiments play an integral role in the solution-phase characterization of biological macromolecules and their interactions. This unit discusses the design of sedimentation velocity and sedimentation equilibrium experiments performed with a Beckman Proteomelab XL-A or XL-I analytical ultracentrifuge and with a Beckman Optima AUC. Instrument settings and experimental design considerations are explained, and strategies for the analysis of experimental data with the UltraScan data analysis software package are presented. Special attention is paid to the strengths and weaknesses of the available detectors, and guidance is provided on how to extract maximum information from analytical ultracentrifugation experiments. © 2024 The Authors. Current Protocols published by Wiley Periodicals LLC.

The cytoplasmic N-terminal tail of Zika virus NS4A protein forms oligomers in the absence of detergent or lipids

The non-structural (NS) NS4A protein in flaviviruses has three predicted transmembrane domains, is critical for virulence and participates in membrane morphogenesis. In Dengue virus (DENV), both hydrophylic N-terminal tail and its first transmembrane domain participate in the formation of oligomers which are important for pathogenicity. However, the relative importance of the N-terminal domain in oligomerization has been under debate. In particular, since in the absence of detergent or lipids, this domain (residues 1–48) in both DENV and Zika virus (ZIKV) NS4A, was found to be disordered. Recently, however, we reported preliminary data that showed that peptide ZIKV NS4A 4–58 adopts a defined secondary structure in aqueous solution and forms oligomers, signaling its importance for full length NS4A oligomerization. Herein we have performed detailed analytical ultracentrifugation experiments to further characterize the oligomerization of this peptide and also a shorter variant (residues 4–44). In both cases, sedimentation velocity produced a single species with concentration-dependent sedimentation coefficient, consistent with a fast equilibrium between at least two species. Combining sedimentation velocity and equilibrium experiments, data is best fitted to a monomer–dimer–trimer equilibrium. Possible models of NS4A oligomers obtained with AlphaFold-2 predict the stabilizing role for residues in this N-terminal domain, such as Arg20, Asn27, Ala44 and Glu50, all at highly conserved positions in flavivirus NS4A proteins. Our results are thus consistent with N-terminal domain interactions acting as one of the driving forces for NS4A homo-oligomerization.

Systematic noise removal from analytical ultracentrifugation data with UltraScan.

A method for removing time- and radially invariant noise from sedimentation velocity and sedimentation equilibrium experiments performed in an analytical ultracentrifuge is presented. The method averages repeat radial incident light measurements as a function of the photomultiplier response at different wavelengths to remove the majority of the time-invariant noise contributions from intensity data measurements. The results of this method are compared to traditional absorbance data generated with a buffer reference and the Beckman Optima AUC data acquisition program, and with the standard UltraScan refinement workflow. The method avoids the amplification of stochastic noise inherent in the absorbance scan subtraction traditionally employed in sedimentation velocity and equilibrium data. In addition, the collection of intensity data frees up the reference channel for additional samples, doubling the capacity of the instrument. In comparison to absorbance data, the residual mean square deviation of a fitted sedimentation velocity experiment without additional noise correction by UltraScan was improved by a factor of 4.5 when using the new method. This improvement benefits sedimentation equilibrium experiments as well as analytical buoyant density equilibrium experiments where routine time-invariant noise correction calculations cannot be performed.

Polysaccharide valproates: Structure - property relationships in solution

Polysaccharides are promising macromolecular platforms for use in the life sciences. Here, bioactive cellulose, pullulan, and dextran valproates are characterized hydrodynamically by sedimentation velocity and thermodynamically by sedimentation equilibrium analytical ultracentrifugation. Using sedimentation-diffusion analysis of sedimentation velocity experiments by numerical solution of the Lamm equation enabled the calculation of sedimentation and diffusion coefficients, and consequently molar masses. Sedimentation equilibrium experiments were then also used to determine the average molar masses. The corresponding set of data, with independently performed self-diffusion measurements by nuclear magnetic resonance spectroscopy, and together with size exclusion chromatography molar masses by coupling to refractive index-, viscometric-, and multi-angle laser light scattering detection, were subsequently correlated to each other by the hydrodynamic invariant and sedimentation parameter. We assess statistically most relevant average values of the molar masses of these polysaccharide valproates with relevant macromolecular conformational characteristics.

Biochemical and structural analyses reveal that the tumor suppressor neurofibromin (NF1) forms a high-affinity dimer

Biochemical and structural analyses reveal that the tumor suppressor neurofibromin (NF1) forms a high-affinity dimer

Characterisation of the molecular properties of scleroglucan as an alternative rigid rod molecule to xanthan gum for oropharyngeal dysphagia

Scleroglucan, a neutral β(1–3) glucan with β(1–6) glucan branches every third residue, is being considered as an alternative rod-like, shear thinning high molecular weight β-glucan based polysaccharide to xanthan gum for the management of patients with oropharyngeal dysphagia. It is therefore important to understand more fully its hydrodynamic properties in solution, in particular heterogeneity, molecular weight distribution and its behaviour in the presence of mucin glycoproteins. A commercially purified scleroglucan preparation produced by fermentation of the filamentous fungus Sclerotium rolfsii was analysed in deionised distilled water with 0.02% added azide. Sedimentation velocity in the analytical ultracentrifuge showed the scleroglucan preparation to be unimodal at concentrations >0.75 mg/ml which resolved into two components at lower concentration and with partial reversibility between the components. Sedimentation coefficient versus concentration plots showed significant hydrodynamic non-ideality. Self-association behaviour was confirmed by sedimentation equilibrium experiments with molecular weights between ~3 × 106 g/mol to ~5 × 106 g/mol after correcting for thermodynamic non-ideality. SEC-MALS-viscosity experiments showed a transition between a rod-shape at lower molar masses to a more flexible structure at higher masses consistent with previous observations. Sedimentation velocity experiments also showed no evidence for potentially problematic interactions with submaxillary mucin.

Characterisation of high molecular weight hop proanthocyanidins using Analytical Ultracentrifugation

We report the novel application of Analytical Ultracentrifugation (AUCF) to characterise the polymeric proanthocyanidin fraction of hops. Extraction of hop samples with 70% acetone (aq) followed by a C-18 Solid Phase Extraction yielded polyphenolic fractions for AUCF analysis. Sedimentation velocity experiments demonstrated the presence of discrete molecular weight bands of proanthocyanidins, as opposed to a continuous distribution of molecular weights. There were 4 such bands for Saaz hop (0.15, 1.1, 2.7 and 4.4S) and 3 bands for Magnum (0.15, 1.6 and 3.0S). The method resulted in a reproducible size (sedimentation coefficient) distribution for replicate runs of the same extract and for extracts prepared from different samples of the same hop variety. Sedimentation equilibrium experiments were then used to fit molecular weight distributions using the new SEDFIT-MSTAR method for the same samples. Thus we report for the first time polymeric proanthocyanidins in hops with molecular weights of up to 100 kDa in Saaz hop (or up to 56 kDa in Magnum). This represents the first application of AUCF to characterise complex fractions of polyphenolics extracted from botanical sources and the methodology developed should find wider application in the study of this diverse and bioactive class of compounds.

A Comprehensive Brownian Dynamics Approach for the Determination of Non-ideality Parameters from Analytical Ultracentrifugation.

Brownian dynamics (BD) has been applied as a comprehensive tool to model sedimentation and diffusion of nanoparticles in analytical ultracentrifugation (AUC) experiments. In this article, we extend the BD algorithm by considering space-dependent diffusion and solvent compressibility. With this, the changes in the sedimentation and diffusion coefficient from altered solvent properties at increased pressures are accurately taken into account. Moreover, it is demonstrated how the concept of space-dependent diffusion is employed to describe concentration-dependent sedimentation and diffusion coefficients, in particular, through the Gralen coefficient and the second virial coefficient. The influence of thermodynamic nonideality on diffusional properties can be accurately simulated and agree with well-known evaluation tools. BD simulations for sedimentation equilibrium and sedimentation velocity (SV) AUC experiments including effects of hydrodynamic and thermodynamic nonideality are validated by global evaluation in SEDANAL. The interplay of solvent compressibility and retrieved nonideality parameters can be studied utilizing BD. Finally, the second virial coefficient is determined for lysozyme from SV AUC experiments and BD simulations and compared to membrane osmometry. These results are in line with DLVO theory. In summary, BD simulations are established for the validation of nonideal sedimentation in AUC providing a sound basis for the evaluation of complex interactions even in polydisperse systems.

Oligomeric state of hypoxanthine−guanine phosphoribosyltransferase from Mycobacterium tuberculosis

Sedimentation equilibrium and size-exclusion chromatography experiments on Mycobacterium tuberculosis hypoxanthine-guanine phosphoribosyltransferase (MtHGPRT) have established the existence of this enzyme as a reversibly associating mixture of dimeric and tetrameric species in 0.1 M Tris-HCl−0.012 M MgCl2, pH 7.4. Displacement of the equilibrium position towards the larger oligomer by phosphate signifies the probable existence of MtHGPRT as a tetramer in the biological environment. These data thus add credibility to the relevance of considering enzyme function in the light of a published tetrameric structure deduced from X-ray crystallography. Failure of 5-phospho-α-d-ribosyl-1-pyrophosphate (PRib-PP) to perturb the dimer−tetramer equilibrium position indicates the equivalence and independence of binding for this substrate (the first to bind in an ordered sequential mechanism) to the two oligomers. By virtue of the displacement of the equilibrium position towards dimer that is affected by removing MgCl2 from the Tris-HCl buffer, it can be concluded that divalent metal ions, as well as phosphate, can affect the oligomerization. These characteristics of MtHGPRT in solution are correlated with published crystal structures of four enzyme−ligand complexes.

3D-Printing for Analytical Ultracentrifugation.

Analytical ultracentrifugation (AUC) is a classical technique of physical biochemistry providing information on size, shape, and interactions of macromolecules from the analysis of their migration in centrifugal fields while free in solution. A key mechanical element in AUC is the centerpiece, a component of the sample cell assembly that is mounted between the optical windows to allow imaging and to seal the sample solution column against high vacuum while exposed to gravitational forces in excess of 300,000 g. For sedimentation velocity it needs to be precisely sector-shaped to allow unimpeded radial macromolecular migration. During the history of AUC a great variety of centerpiece designs have been developed for different types of experiments. Here, we report that centerpieces can now be readily fabricated by 3D printing at low cost, from a variety of materials, and with customized designs. The new centerpieces can exhibit sufficient mechanical stability to withstand the gravitational forces at the highest rotor speeds and be sufficiently precise for sedimentation equilibrium and sedimentation velocity experiments. Sedimentation velocity experiments with bovine serum albumin as a reference molecule in 3D printed centerpieces with standard double-sector design result in sedimentation boundaries virtually indistinguishable from those in commercial double-sector epoxy centerpieces, with sedimentation coefficients well within the range of published values. The statistical error of the measurement is slightly above that obtained with commercial epoxy, but still below 1%. Facilitated by modern open-source design and fabrication paradigms, we believe 3D printed centerpieces and AUC accessories can spawn a variety of improvements in AUC experimental design, efficiency and resource allocation.

ID: 95: Quantitative characterisation of STAT2 dimerisation

Interferons (IFN) are released by cells as a response to microbial infection. They are best known for their antiviral and immunomodulatory functions. IFNs bind to cell surface receptors which then initiate a signalling cascade inside the cell, ultimately resulting in target gene transcription. Essential to this signalling cascade is the dimersation of signal transducer and activator of transcription proteins (STATs). The composition of these dimers determines the genes targeted. The STAT proteins, which are encoded by 7 different genes, can function as homodimers with the possible exception of STAT2. We will generate quanititative data on STAT2 homodimerisation to clarify this question. It is well known, in contrast, that STAT2 heterodimerises with STAT1. In fact, STAT1-STAT2 heterodimers are crucial for type I IFN signalling. STAT heterodimerisation is a commonly observed phenomenon that is nonetheless poorly understood. Our study will assess the interaction of STAT1 with STAT2 and thus for the first time generate quantitative data on the heterodimerisation of STAT proteins. We will utilise recombinant STAT1- and STAT2-proteins produced in insect cells, purified with affinity chromatography and gel filtration. Subsequently these proteins will be subject to sedimentation velocity and sedimentation equilibrium experiments using an analytical ultracentrifuge. These powerful methods allow quantitative characterisation of single- and multi-protein interactions, such as homodimer and heterodimer assembly respectively. These studies will further our understanding of STAT dimerisation and hence IFN signalling.

Effect of helix length on the stability of the Lac repressor antiparallel coiled coil.

The helix length dependence of the stability of antiparallel four-chain coiled coils is investigated using eight synthetic peptides (Lac21-Lac28) whose sequences are derived from the tetramerization domain of the Lac repressor protein. Previous studies using analytical ultracentrifugation sedimentation equilibrium experiments to characterize Lac21 and Lac28 justifies the use of a two state model to describe the unfolding behavior of these two peptides. Using circular dichroism spectropolarimetry as a measure of tetramer assembly, both chemical and thermal denaturation experiments were carried out to determine thermodynamic parameters. We found that the hydrophobic core residues provide the greatest impact on stability and, as a consequence, must reorganize the register of the antiparallel helices to accommodate the burial of the nonpolar amino acids. Addition of noncore residues appears to have only a minor effect on stability, and in some cases, show a slight destabilization.

Solution structure and properties of AlgH from Pseudomonas aeruginosa.

In Pseudomonas aeruginosa, the algH gene regulates the cellular concentrations of a number of enzymes and the production of several virulence factors, and is suggested to serve a global regulatory function. The precise mechanism by which the algH gene product, the AlgH protein, functions is unknown. The same is true for AlgH family members from other bacteria. In order to lay the groundwork for understanding the physical underpinnings of AlgH function, we examined the structure and physical properties of AlgH in solution. Under reducing conditions, results of NMR, electrophoretic mobility, and sedimentation equilibrium experiments indicate AlgH is predominantly monomeric and monodisperse in solution. Under nonreducing conditions intra and intermolecular disulfide bonds form, the latter promoting AlgH oligomerization. The high-resolution solution structure of AlgH reveals alpha/beta-sandwich architecture fashioned from ten beta strands and seven alpha helices. Comparison with available structures of orthologues indicates conservation of overall structural topology. The region of the protein most strongly conserved structurally also shows the highest amino acid sequence conservation and, as revealed by hydrogen-deuterium exchange studies, is also the most stable. In this region, evolutionary trace analysis identifies two clusters of amino acid residues with the highest evolutionary importance relative to all other AlgH residues. These frame a partially solvent exposed shallow hydrophobic cleft, perhaps identifying a site for intermolecular interactions. The results establish a physical foundation for understanding the structure and function of AlgH and AlgH family proteins and should be of general importance for further investigations of these and related proteins.

Molecular Basis of Tetramerization and pH-Gating in the KcsA Potassium Channel Cytoplasmic Domain

The intracellular C-terminal domain (CTD) of KcsA, a bacterial homotetrameric potassium channel, is a 40-residue long segment which natively adopts a helical bundle conformation with four-fold symmetry. A hallmark of KcsA behavior is a pH-induced conformational change which leads to opening of the channel at acidic pH. While crystal structures of full-length KcsA failed to observe a pH-effect upon the CTD, other biophysical methods have presented evidence to the contrary. We approached the question of CTD structure and its pH-dependence by studying the behavior of soluble peptides corresponding to residues 128-160 of the CTD (CTD34). A combination of NMR and sedimentation equilibrium experiments established CTD34 to be a tetramer with a KD of (2.0 ± 0.5) x 10−11 M3 at neutral pH, and this tetrameric species undergoes pH-dependent dissociation, rendering CTD34 fully monomeric below pH 5.0. The structural basis for this phenomenon is destabilization of the tetrameric CTD34 by protonation of residue H145 in the monomeric form of the peptide.Molecular factors contributing to CTD tetramerization were investigated by comparing the tetrameric stability of single alanine mutants as determined by NMR, SE and molecular dynamics. Single-residue contributions to tetramer stability were in the 0.5-3.5 kcal/mol range. Hydrophobic interactions between residues lining the tetramer core generally contributed more to formation of tetramer than the inter-subunit salt-bridges between R147 and D149/E152. A third class of residues outside the helical interface influenced tetramer stability via the tetramerization on-rate by changing the inherent helical propensity of CTD34 which promotes tetramer formation. We conclude that the CTD is an independent tetramerization domain modulated by pH, and tetramer formation is controlled by a combination of on- and off-rate effects which conform to current paradigms of protein folding.

Revisiting Structural Hieracrchy: A Fluorescence Investigation of Unfolding of an Oligomeric Protein

α-crystallin is a multimeric lens protein with chaperone-like function and is responsible for maintaining lens transparency. The structural stability and unfolding-refolding properties of this protein are believed to be important for its function. We undertook a multi-probe based fluorescence approach to explore the changes in the various levels of organization of α-crystallin at different urea concentration region. Steady-state fluorescence emission and quenching studies using extrinsic and intrinsic fluorescence probes reveal that at 0.6 M urea a compact structural intermediate is formed which has a native-like secondary structure with minimal yet detectable tertiary structure perturbation associated with enhanced surface exposure of hydrophobic groups, possibly arising from interfacial structure meltdown. At 2.8 M urea the tertiary interactions undergo almost complete collapse with partial disintegration of secondary and quaternary structure. Investigation of surface solvation with picosecond resolved fluorescence transients of acrylodan covalently tagged to α-crystallin reveals a dry native-like core of α-crystallin at 0.6 M urea compared to enhanced water penetration at 2.8 M urea and extensive solvation at 6 M urea. Temperature dependent subunit exchange kinetics reveal decrease of activation energy for the subunit exchange process by 22 kJ mol-1 on changing urea concentration from 0 to 0.6 M compared to over 75 kJ mol-1 on changing urea concentration from 0 to 2.8 M. Dynamic light scattering study indicates swelling at 0.6 M urea, however oligomerization is retained as observed from sedimentation equilibrium experiment. At 2.8 M urea the oligomeric size is reduced and a monomer is produced at 6 M urea. These data clearly demonstrates that tertiary structure dissolution precedes oligomeric degradation. Such non-hierarchical structure dissolution indicates the possibility of tertiary contact formation to be a rather later folding event in case of large oligomeric proteins likes α-Crystallin.

MultiSig: a new high-precision approach to the analysis of complex biomolecular systems

MultiSig is a newly developed mode of analysis of sedimentation equilibrium (SE) experiments in the analytical ultracentrifuge, having the capability of taking advantage of the remarkable precision (~0.1 % of signal) of the principal optical (fringe) system employed, thus supplanting existing methods of analysis through reducing the ‘noise’ level of certain important parameter estimates by up to orders of magnitude. Long-known limitations of the SE method, arising from lack of knowledge of the true fringe number in fringe optics and from the use of unstable numerical algorithms such as numerical differentiation, have been transcended. An approach to data analysis, akin to ‘spatial filtering’, has been developed, and shown by both simulation and practical application to be a powerful aid to the precision with which near-monodisperse systems can be analysed, potentially yielding information on protein-solvent interaction. For oligo- and poly-disperse systems the information returned includes precise average mass distributions over both cell radial and concentration ranges and mass-frequency histograms at fixed radial positions. The application of MultiSig analysis to various complex heterogenous systems and potentially multiply-interacting carbohydrate oligomers is described.

Analysis of high-affinity assembly for AMPA receptor amino-terminal domains

Analytical ultracentrifugation (AUC) and steady-state fluorescence anisotropy were used to measure the equilibrium dissociation constant (Kd) for formation of dimers by the amino-terminal domains (ATDs) of the GluA2 and GluA3 subtypes of AMPA receptor. Previous reports on GluA2 dimerization differed in their estimate of the monomer-dimer Kd by a 2,400-fold range, with no consensus on whether the ATD forms tetramers in solution. We find by sedimentation velocity (SV) analysis performed using absorbance detection a narrow range of monomer-dimer Kd values for GluA2, from 5 to 11 nM for six independent experiments, with no detectable formation of tetramers and no effect of glycosylation or the polypeptide linker connecting the ATD and ligand-binding domains; for GluA3, the monomer-dimer Kd was 5.6 µM, again with no detectable tetramer formation. For sedimentation equilibrium (SE) experiments, a wide range of Kd values was obtained for GluA2, from 13 to 284 nM, whereas for GluA3, the Kd of 3.1 µM was less than twofold different from the SV value. Analysis of cell contents after the ∼1-week centrifuge run by silver-stained gels revealed low molecular weight GluA2 breakdown products. Simulated data for SE runs demonstrate that the apparent Kd for GluA2 varies with the extent of proteolysis, leading to artificially high Kd values. SV experiments with fluorescence detection for GluA2 labeled with 5,6-carboxyfluorescein, and fluorescence anisotropy measurements for GluA2 labeled with DyLight405, yielded Kd values of 5 and 11 nM, consistent with those from SV with absorbance detection. However, the sedimentation coefficients measured by AUC using absorbance and fluorescence systems were strikingly different, and for the latter are not consistent with hydrodynamic protein models. Thus, for unknown reasons, the concentration dependence of sedimentation coefficients obtained with fluorescence detection SV may be unreliable, limiting the usefulness of this technique for quantitative analysis.

Structural and functional characterization of HP0377, a thioredoxin-fold protein fromHelicobacter pylori

Maturation of cytochrome c is carried out in the bacterial periplasm, where specialized thiol-disulfide oxidoreductases provide the correct reduction of oxidized apocytochrome c before covalent haem attachment. HP0377 from Helicobacter pylori is a thioredoxin-fold protein that has been implicated as a component of system II for cytochrome c assembly and shows limited sequence similarity to Escherichia coli DsbC, a disulfide-bond isomerase. To better understand the role of HP0377, its crystal structures have been determined in both reduced and partially oxidized states, which are highly similar to each other. Sedimentation-equilibrium experiments indicate that HP0377 is monomeric in solution. HP0377 adopts a thioredoxin fold but shows distinctive variations as in other thioredoxin-like bacterial periplasmic proteins. The active site of HP0377 closely resembles that of E. coli DsbC. A reductase assay suggests that HP0377 may play a role as a reductase in the biogenesis of holocytochrome c553 (HP1227). Binding experiments indicate that it can form a covalent complex with HP0518, a putative L,D-transpeptidase with a catalytic cysteine residue, via a disulfide bond. Furthermore, physicochemical properties of HP0377 and its R86A variant have been determined. These results suggest that HP0377 may perform multiple functions as a reductase in H. pylori.

Dynein and dynactin leverage their bivalent character to form a high-affinity interaction.

Cytoplasmic dynein and dynactin participate in retrograde transport of organelles, checkpoint signaling and cell division. The principal subunits that mediate this interaction are the dynein intermediate chain (IC) and the dynactin p150Glued; however, the interface and mechanism that regulates this interaction remains poorly defined. Herein, we use multiple methods to show the N-terminus of mammalian dynein IC, residues 10–44, is sufficient for binding p150Glued. Consistent with this mapping, monoclonal antibodies that antagonize the dynein-dynactin interaction also bind to this region of the IC. Furthermore, double and triple alanine point mutations spanning residues 6 to 19 in the yeast IC homolog, Pac11, produce significant defects in spindle positioning. Using the same methods we show residues 381 to 530 of p150Glued form a minimal fragment that binds to the dynein IC. Sedimentation equilibrium experiments indicate that these individual fragments are predominantly monomeric, but admixtures of the IC and p150Glued fragments produce a 2:2 complex. This tetrameric complex is sensitive to salt, temperature and pH, suggesting that the binding is dominated by electrostatic interactions. Finally, circular dichroism (CD) experiments indicate that the N-terminus of the IC is disordered and becomes ordered upon binding p150Glued. Taken together, the data indicate that the dynein-dynactin interaction proceeds through a disorder-to-order transition, leveraging its bivalent-bivalent character to form a high affinity, but readily reversible interaction.

Highly active β-xylosidases of glycoside hydrolase family 43 operating on natural and artificial substrates

The hemicellulose xylan constitutes a major portion of plant biomass, a renewable feedstock available for conversion to biofuels and other bioproducts. β-xylosidase operates in the deconstruction of the polysaccharide to fermentable sugars. Glycoside hydrolase family 43 is recognized as a source of highly active β-xylosidases, some of which could have practical applications. The biochemical details of four GH43 β-xylosidases (those from Alkaliphilus metalliredigens QYMF, Bacillus pumilus, Bacillus subtilis subsp. subtilis str. 168, and Lactobacillus brevis ATCC 367) are examined here. Sedimentation equilibrium experiments indicate that the quaternary states of three of the enzymes are mixtures of monomers and homodimers (B. pumilus) or mixtures of homodimers and homotetramers (B. subtilis and L. brevis). k cat and k cat/K m values of the four enzymes are higher for xylobiose than for xylotriose, suggesting that the enzyme active sites comprise two subsites, as has been demonstrated by the X-ray structures of other GH43 β-xylosidases. The K i values for D-glucose (83.3-357 mM) and D-xylose (15.6-70.0 mM) of the four enzymes are moderately high. The four enzymes display good temperature (K t (0.5) ∼ 45 °C) and pH stabilities (>4.6 to <10.3). At pH 6.0 and 25 °C, the enzyme from L. brevis ATCC 367 displays the highest reported k cat and k cat/K m on natural substrates xylobiose (407 s(-1), 138 s(-1) mM(-1)), xylotriose (235 s(-1), 80.8 s(-1) mM(-1)), and xylotetraose (146 s(-1), 32.6 s(-1) mM(-1)).