Enzyme Stability Research Articles

Covalent Organic Frameworks Based Photoenzymatic Nano‐reactor for Asymmetric Dynamic Kinetic Resolution of Secondary Amines

AbstractBio‐catalysis represents a highly efficient and stereoselective method for the synthesis of valuable chiral compounds, however, the poor stability and limited reaction types of free enzymes restrict their wide application in industrial production. In this work, to overcome these problems, a multifunctional photoenzymatic nanoreactor CALB@COF‐Ir was developed through the encapsulation of Candida antarctica lipase B (CALB) in a photosensitive covalent organic framework COF‐Ir. This bio‐nanocluster serves as efficient catalysts in asymmetric dynamic kinetic resolution (DKR) of secondary amines to give a series of chiral amines in high yields (up to 99 %) and enantioselectivities (up to 99 % ee). The well‐designed COF‐Ir not only acts as safety cover to prevent CALB from deactivation but promotes racemization of secondary amines via photo‐induced hydrogen atom transfer (HAT) process. Photoelectric characterization and TDDFT calculation revealed that (ppy)2Ir units in COF‐Ir play crucial role in this photocatalytic system which enhance its photo‐redox properties through facilitating the separation between photoelectrons (e−) and holes (h+). Furthermore, the heterogeneous photoenzymatic nanoreactor could be recycled for five rounds with slight decline of catalytic reactivity.

2D Catalytic Nanozyme Enables Cascade Enzyodynamic Effect-Boosted and Ca2+ Overload-Induced Synergistic Ferroptosis/Apoptosis in Tumor.

The introduction of glucose oxidase, exhibiting characteristics of glucose consumption and H2O2 production, represents an emerging antineoplastic therapeutic approach that disrupts nutrient supply and promotes efficient generation of reactive oxygen species (ROS). However, the instability of natural enzymes and their low therapeutic efficacy significantly impede their broader application. In this context, 2D Ca2Mn8O16 nanosheets (CMO NSs) designed and engineered to serve as a high-performance nanozyme, enhancing the enzyodynamic effect for a ferroptosis-apoptosis synergistic tumor therapy, are presented. In addition to mimicking activities of glutathione peroxidase, catalase, oxidase, and peroxidase, the engineered CMO NSs exhibit glucose oxidase-mimicking activities. This feature contributes to their antitumor performance through cascade catalytic reactions, involving the disruption of glucose supply, self-supply of H2O2, and subsequent efficient ROS generation. The exogenous Ca2+ released from CMO NSs, along with the endogenous Ca2+ enrichment induced by ROS from the peroxidase- and oxidase-mimicking activities of CMO NSs, collectively mediate Ca2+ overload, leading to apoptosis. Importantly, the ferroptosis process is triggered synchronously through ROS output and glutathione consumption. The application of exogenous ultrasound stimulation further enhances the efficiency of ferroptosis-apoptosis synergistic tumor treatment. This work underscores the crucial role of enzyodynamic performance in ferroptosis-apoptosis synergistic therapy against tumors.

Enzymatic conversion of CO2 to formate: The potential of tungsten-containing formate dehydrogenase in flow reactor system

This study introduces a novel approach for CO2 reduction to formate using the recombinant formate dehydrogenase 1 (MeFDH1) from Methylorubrum extorquens AM1 as biocatalyst, addressing challenges in activity, productivity, and long-term stability of enzyme. We demonstrate that immobilized MeFDH1 supported by electrochemical reaction system enhances formate production and stability, achieving over 1.7 M concentration with an initial rate of 20 mM/h and near-unity Faradaic efficiency for over 200 hours. In further, the reusability of immobilized MeFDH1 was obtained without significant declination of productivity and selectivity. The electrochemical study of MeFDH1 found the product inhibition in continuous CO2 conversion. To overcome this challenge and build efficient process, the integration of a flow reactor system and in-situ separation unit further improved the system's performance and scalability. This advancement in enzymatic CO2 conversion suggests the potential of biocatalysis towards addressing global warming through sustainable chemical synthesis.

Functionalized magnetic nanoparticles for Cellic Ctec2 cellulase immobilization: Allowing reusability of enzyme in the conversion of cellulosic biomass

The method of enzyme immobilization can ameliorate the overall stability and restoration of enzymes, hence facilitating their broader application in several sectors. This investigation utilized cellulase as a hydrolytic enzyme. In order to enhance the stability and performance of the cellulase enzyme, the research employed immobilization technology to secure the Cellic Ctec2 cellulase to the synthesized Cs@Fe3O4 nanocomposites. Fe3O4 nanoparticles (NPs) were coated with chitosan obtained from co-precipitation method that served as enzyme carrier. The NPs (Cs@ Fe3O4) were observed under XRD; VSM (vibrating-sample magnetometer) shows saturation magnetizations (Ms), UV–vis, field emission scanning electron microscopy (FESEM), and Fourier transform infrared spectroscopy (FT-IR). Response surface approach was applied to optimize the conditions for immobilization of cellulase. The optimum immobilization of cellulase reaches to 99.1% of loading efficiency and 69.7% of recovery activity with 2.5% of glutaraldehyde concentration. Furthermore, under ideal circumstances the immobilized enzyme’s thermostability, pH stability, temperature tolerance and reusability, were studied with respect to free cellulase. Higher relative activity of cellulase enzyme was observed at pH 5 with 50 °C temperature than free enzyme. One percent CMC hydrolysis is considered for reusability of free and immobilized enzyme and releases 222 mg glucose/g substrate at 24 h, showing great quiescence in cellulosic biomass conversion. Immobilized cellulase demonstrated high reusability by retaining almost 61.2% up to the 5th cycles and 51.2% of activity-maintained 10th cycle of hydrolysis. Reusability of cellulase enzyme can attain a gradual decrease in relative activity as number of repeats of the cycle increases to 10 during hydrolysis and increases in glucose yield after hydrolysis.

Assessment of the efficiency and stability of enzymatic membrane reaction utilizing lipase covalently immobilized on a functionalized hybrid membrane

Enzyme immobilization in membrane bioreactors has been considered as a practical approach to enhance the stability, reusability, and efficiency of enzymes. In this particular study, a new type of hybrid membrane reactor was created through the phase inversion method, utilizing hybrid of graphene oxide nanosheets (GON) and polyether sulfone (PES) in order to covalently immobilize the Candida rugosa lipase (CRL). The surface of hybrid membrane was initially modified by (3-Aminopropyl) triethoxysilane (APTES), before the use of glutaraldehyde (GLU), as a linker, through the imine bonds. The resulted enzymatic hybrid membrane reactors (EHMRs) were then thoroughly analyzed by using field-emission scanning electron microscopy (FE-SEM), contact angle goniometry, surface free energy analysis, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, attenuated total reflection (ATR), and energy-dispersive X-ray (EDX) spectroscopy. The study also looked into the impact of factors such as initial CRL concentration, storage conditions, and immobilization time on the EHMR's performance and activity, which were subsequently optimized. The results demonstrated that the CRLs covalently immobilized on the EHMRs displayed enhanced pH and thermal stability compared to those physically immobilized or free. These covalently immobilized CRLs could maintain over 60% of their activity even after 6 reaction cycles spanning 50 days. EHMRs are valuable biocatalysts in developing various industrial, environmental, and analytical processes.

Dual enzyme compartmentalization in a pH-responsive membrane: A way to tune enzymatic reactions in biocatalytic membranes

In this work, the use of a pH-responsive isoporous membrane allowed the compartmentalization of two different enzymes, one on the surface and the other in the pores of the membrane. This intensified and compartmentalized enzyme-loaded membrane system allowed the two enzymatic reactions to be modulated based on a pH shift. The chosen enzymes are pectinase and β-glucosidase, enzymes commonly used in biorefinery, whose optimum pH (3 and 6.5, respectively) is in the range where membrane pore closing (pH < 4) and opening is observed. Pectinase is covalently bound to the membrane surface at pH 3 while the pores are closed and is used to control the membrane fouling due to pectin accumulation during plant material processing. β-glucosidase is immobilized in the membrane pores at pH 6.5 (open pores) and is used to catalyze the reaction of oleuropein into the phytotherapeutic oleuropein aglycone. The different localization of the two enzymes was demonstrated by AFM, immunolocalization and SEM, confocal microscopy and XPS. In the open pore configuration, a very high conversion of pectin and oleuropein is simultaneously obtained (93% and 95%, in 165 h, respectively); whereas, in the closed pore configuration, an increased and exclusive conversion (95% in 24 h) of pectin was obtained. This innovative strategy of artificial ordered compartmentalization allows tuning the enzymatic reactions based on pH, preserving labile biomolecules (e.g.β-glucosidase) from deactivation at acidic pH and cleaning the membrane avoiding aggressive solvents. This makes it possible to increase the stability of enzymes, which is an obstacle to the development of biocatalytic membrane reactors, and proposes an unconventional and efficient way to synchronize the action of complementary enzymes in a case, or to selectively enhance the action of one of them by simply shifting the pH.

Enzymes as indispensable markers in disease diagnosis.

Enzymes have been usedfor disease diagnosis for many decades; however, advancements in technology like ELISA and flow cytometry-based detection havesignificantlyincreased their use and have increased the sensitivity of detection. Technological advancements in recombinant enzyme production haveincreased enzymatic stability,and the use ofcolorimetric-based and florescence-based assays has led to their increased use as biomarkers for disease detection. Enzymes like acid phosphatase, cathepsin, lactate dehydrogenase, thymidine kinaseand creatine kinase are indispensable markers for diagnosing cancer, cardiovasculardiseasesand others. This minireview summarizes various enzymes used in disease diagnosis, their metabolic role, market valueand potential as disease markers across various metabolic and other disorders.

Ligand-induced protein transition state stabilization switches the binding pathway from conformational selection to induced fit

Protein-ligand complex formation is fundamental to biological function. A central question is whether proteins spontaneously adopt binding-competent conformations to which ligands bind conformational selection (CS) or whether ligands induce the binding-competent conformation induced fit (IF). Here, we resolve the CS and IF binding pathways by characterizing protein conformational dynamics over a wide range of ligand concentrations using NMR relaxation dispersion. We determined the relative flux through the two pathways using a four-state binding model that includes both CS and IF. Experiments conducted without ligand show that galectin-3 exchanges between the ground-state conformation and a high-energy conformation similar to the ligand-bound conformation, demonstrating that CS is a plausible pathway. Near-identical crystal structures of the apo and ligand-bound states suggest that the high-energy conformation in solution corresponds to the apo crystal structure. Stepwise additions of the ligand lactose induce progressive changes in the relaxation dispersions that we fit collectively to the four-state model, yielding all microscopic rate constants and binding affinities. The ligand affinity is higher for the bound-like conformation than for the ground state, as expected for CS. Nonetheless, the IF pathway contributes greater than 70% of the total flux even at low ligand concentrations. The higher flux through the IF pathway is explained by considerably higher rates of exchange between the two protein conformations in the ligand-associated state. Thus, the ligand acts to decrease the activation barrier between protein conformations in a manner reciprocal to enzymatic transition-state stabilization of reactions involving ligand transformation.

De novo missense variants in exon 9 of SEPHS1 cause a neurodevelopmental condition with developmental delay, poor growth, hypotonia, and dysmorphic features

Selenophosphate synthetase (SEPHS) plays an essential role in selenium metabolism. Two mammalian SEPHS paralogues, SEPHS1 and SEPHS2, share high sequence identity and structural homology with SEPHS. Here, we report nine individuals from eight families with developmental delay, growth and feeding problems, hypotonia, and dysmorphic features, all with heterozygous missense variants in SEPHS1. Eight of these individuals had a recurrent variant at amino acid position 371 of SEPHS1 (p.Arg371Trp, p.Arg371Gln, and p.Arg371Gly); seven of these variants were known to be de novo. Structural modeling and biochemical assays were used to understand the effect of these variants on SEPHS1 function. We found that a variant at residue Trp352 results in local structural changes of the C-terminal region of SEPHS1 that decrease the overall thermal stability of the enzyme. In contrast, variants of a solvent-exposed residue Arg371 do not impact enzyme stability and folding but could modulate direct protein-protein interactions of SEPSH1 with cellular factors in promoting cell proliferation and development. In neuronal SH-SY5Y cells, we assessed the impact of SEPHS1 variants on cell proliferation and ROS production and investigated the mRNA expression levels of genes encoding stress-related selenoproteins. Our findings provided evidence that the identified SEPHS1 variants enhance cell proliferation by modulating ROS homeostasis. Our study supports the hypothesis that SEPHS1 plays a critical role during human development and provides a basis for further investigation into the molecular mechanisms employed by SEPHS1. Furthermore, our data suggest that variants in SEPHS1 are associated with a neurodevelopmental disorder.

Balancing the pretreatment effect of deep eutectic solvents on biomass and the activity of β-glucosidase originating from Paenibacillus sp. LLZ1

The two major impediments to biomass resourcing are the catalytic efficiency of enzymes and the effectiveness of biomass pretreatment. In this study, six genes encoding β-Glucosidases (BGLs) derived from Paenibacillus sp. LLZ1 were cloned and expressed. The activity of BGL-F, which had the highest enzyme activity, was 24.1 U/mg, which was 39.8–83.7% higher than that of the other BGLs. Molecular docking and surface charge analyses showed that the binding energy of BGL-F to cellobiose and its electronegative ligand-binding pocket were greater than those of other BGLs. On the other hand, by calculating and comparing the Kamlet–Taft (KT) values of deep eutectic solvent (DES) composed of different hydrogen bond donors (HBD) and hydrogen bond acceptors (HDA), it was found that DES composed of betaine and glycerol had the highest α value of 0.97, meaning that it could provide the highest hydrogen bonding capacity, and thus it had the best pretreatment effect on biomass. Analysis by circular dichroism (CD) spectroscopy revealed a decrease in α-helix and an increase in β-strand in the secondary structure of the DES-treated BGL-F, implying an increase in enzyme activity and stability. This result was also confirmed experimentally by the fact that the Km and Vmax of the enzyme in the DES system increased by 13.2% and 57.9%, respectively, and the inactivation rate (kd) decreased by 21.4%. The results of this study showed that DES consisting of glycerol-betaine achieved a better balance between the promotion of enzyme activity and biomass pretreatment.

The Use of Immobilised Enzymes for Lipid and Dairy Processing and Their Waste Products: A Review of Current Progress

The use of edible oils and fats in dairy products is becoming increasingly important in the food industry because of their complementary functional properties. Most of these products are produced using food-grade enzymes as processing aids because processes involving enzymes are considered mild and environmentally friendly for regulatory purposes. The poor stability and recovery of enzymes in their native state limit their performance, and to enhance their activity, stability, and reusability, enzymes are often immobilised—a process that involves attaching them to a solid support. Additionally, immobilisation enables enzymes to selectively target specific substrates or products, making them highly efficient. These features have led to the increased use of immobilised enzymes in dairy and lipid processing and enzymes have been used to produce a broad range of products such as whey protein concentrates and isolates, peptide–lipid conjugates, lipid concentrates, structured lipids, and human milk fat substitutes. Therefore, this article reviews the current progress on different enzyme preparations and their use in lipid and dairy processing. It also summarises opportunities in enzyme-catalysed valorisation of dairy and lipid waste streams with the ultimate goals of sustainable food production and reductions in waste.

Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized.

Enhancing Alkaline Protease Stability through Enzyme-Catalyzed Crosslinking and Its Application in Detergents

Enzymatic additives, particularly alkaline proteases, play a crucial role in enhancing detergent effectiveness against protein-based stains. Despite advancements in enzyme stabilization techniques, there is a need for innovative strategies to further improve protease stability in laundry detergents. However, research exploring the utilization of substrate imprinting technology to achieve this objective remains limited. Therefore, this study aims to enhance the stability of alkaline proteases in laundry detergents by employing casein as an imprinting substrate and utilizing transglutaminase-mediated (TGase) crosslinking to modify proteases 102 and 306. The optimal temperature, pH, and thermal stability of the modified alkaline proteases 102 and 306 showed no significant changes. However, these two modified alkaline proteases exhibited varying degrees of improvement in stability among the 14 detergent additives tested. Under 40 °C incubation for 24 h, the relative enzyme activity of modified alkaline protease 102 increased approximately 1.4–15-fold in AEO-9, BS-12, CMI, APG, FMEE, and SOE, while the relative enzyme activity of modified alkaline protease 306 increased approximately 1.2–3.7-fold across different additives (FMEE, AEO-9, BS-12, SOE, FAA, and AEC-9Na). These modified proteases demonstrated improved stability and wider applicability across commercial detergent formulations available. Integrated into standard laundry detergent at a 1:7 ratio before and after modification, they effectively removed protein stains from the cotton fabric after 24 h of 40 °C incubation. These findings provide insights into more effective stain-removal techniques.

Activation and friction in enzymatic loop opening and closing dynamics

Protein loop dynamics have recently been recognized as central to enzymatic activity, specificity and stability. However, the factors controlling loop opening and closing kinetics have remained elusive. Here, we combine molecular dynamics simulations with string-method determination of complex reaction coordinates to elucidate the molecular mechanism and rate-limiting step for WPD-loop dynamics in the PTP1B enzyme. While protein conformational dynamics is often represented as diffusive motion hindered by solvent viscosity and internal friction, we demonstrate that loop opening and closing is activated. It is governed by torsional rearrangement around a single loop peptide group and by significant friction caused by backbone adjustments, which can dynamically trap the loop. Considering both torsional barrier and time-dependent friction, our calculated rate constants exhibit very good agreement with experimental measurements, reproducing the change in loop opening kinetics between proteins. Furthermore, we demonstrate the applicability of our results to other enzymatic loops, including the M20 DHFR loop, thereby offering prospects for loop engineering potentially leading to enhanced designs.

Evaluation of the operational conditions of the glucose oxidase and catalase multienzymatic system through enzyme co-immobilization on amino hierarchical porous silica

Hexaric acids have attracted attention lately because they are platform chemicals for synthesizing pharmaceuticals. In particular, gluconic acid is one of the most studied because it is readily available in nature. In this work, operational conditions like temperature and pH were evaluated for the enzymatic production of gluconic acid. For this purpose, glucose oxidase (GOx) and catalase (CAT) were individually immobilized and co-immobilized using amino-silica as support. The catalytic performance of the enzymes both as separate biocatalysts (GOx or CAT) and as an enzymatic complex (GOx-CAT) was assessed in terms of enzymatic activity and stability at temperatures 45 °C and 50 °C and pH 6 to 8. The results show that CAT is a key enzyme for gluconic acid production as it prevents GOx from being inhibited by H2O2. However, CAT was found to be less stable than GOx. Therefore, different GOx to CAT enzymatic ratios were studied, and a ratio of 1–3 was determined to be the best. The highest glucose conversion conditions were 45 °C and pH 7.0 for 24 h. Regarding the biocatalyst reuse, GOx-CAT retained more than 70% of its activity after 6 reaction cycles. These results contribute to further knowledge and application of oxidases for hexaric acid production and shed greater light on the role of the glucose oxidase/catalase pair in better catalytic performance. Both enzymes were immobilized in one pot, which is relevant for their potential use in industry; an enzyme system was obtained in a single step.

Molecular Insights into the Enhanced Activity and/or Thermostability of PET Hydrolase by D186 Mutations.

PETase exhibits a high degradation activity for polyethylene terephthalate (PET) plastic under moderate temperatures. However, the effect of non-active site residues in the second shell of PETase on the catalytic performance remains unclear. Herein, we proposed a crystal structure- and sequence-based strategy to identify the key non-active site residue. D186 in the second shell of PETase was found to be capable of modulating the enzyme activity and stability. The most active PETaseD186N improved both the activity and thermostability with an increase in Tm by 8.89 °C. The PET degradation product concentrations were 1.86 and 3.69 times higher than those obtained with PETaseWT at 30 and 40 °C, respectively. The most stable PETaseD186V showed an increase in Tm of 12.91 °C over PETaseWT. Molecular dynamics (MD) simulations revealed that the D186 mutations could elevate the substrate binding free energy and change substrate binding mode, and/or rigidify the flexible Loop 10, and lock Loop 10 and Helix 6 by hydrogen bonding, leading to the enhanced activity and/or thermostability of PETase variants. This work unraveled the contribution of the key second-shell residue in PETase in influencing the enzyme activity and stability, which would benefit in the rational design of efficient and thermostable PETase.

The effect of chemical modification using citraconic anhydride on the stability of α-amylase from Aspergillus fumigatus

Abstract The purpose of this research is to improve the stability of α-amylase from Aspergillus fumigatus by chemical modification with citraconic anhydride. The α-amylase was isolated using a centrifugation technique, followed by purification using precipitation and dialysis of ammonium sulfate salt. The experimental results demonstrate that the purity of purified α-amylase is 13.41 times higher than that of the crude extract. A significant increase in the optimum temperature was also achieved, in which the optimum temperature of 50 °C was found for native α-amylase, while for modified α-amylase, the optimum temperature of 60 °C was found. Similarly, an increase in half-life was also evident, which is 38.72 min found for the native enzyme to 256.67–330.00 min for modified α-amylase, depending on the volume of citraconic anhydride used. Modification also resulted in increased free energy values (ΔG i) from 104.348 for the native enzyme to 109.585–110.281 kJ mol−1 for modified α-amylase, indicating that modified α-amylase is stiffer than native α-amylase. The results obtained in this work demonstrate that citric anhydride is a very promising modifying agent to improve the stability and performance of α-amylase enzyme isolated from A. fumigatus. The findings of this study also offer an opportunity for the application of citric anhydride for other enzymes.

Covalent Organic Frameworks Based Photoenzymatic Nano-reactor for Asymmetric Dynamic Kinetic Resolution of Secondary Amines.

Bio-catalysis represents a highly efficient and stereoselective method for the synthesis of valuable chiral compounds, however, the poor stability and limited reaction types of free enzymes restrict their wide application in industrial production. In this work, to overcome these problems, a multifunctional photoenzymatic nanoreactor CALB@COF-Ir was developed through the encapsulation of Candida antarctica lipase B (CALB) in a photosensitive covalent organic framework COF-Ir. This bio-nanocluster serves as efficient catalysts in asymmetric dynamic kinetic resolution (DKR) of secondary amines to give a series of chiral amines in high yields (up to 99 %) and enantioselectivities (up to 99 % ee). The well-designed COF-Ir not only acts as safety cover to prevent CALB from deactivation but promotes racemization of secondary amines via photo-induced hydrogen atom transfer (HAT) process. Photoelectric characterization and TDDFT calculation revealed that (ppy)2Ir units in COF-Ir play crucial role in this photocatalytic system which enhance its photo-redox properties through facilitating the separation between photoelectrons (e-) and holes (h+). Furthermore, the heterogeneous photoenzymatic nanoreactor could be recycled for five rounds with slight decline of catalytic reactivity.

Nanomaterials for co‐immobilization of multiple enzymes

AbstractIn order to co‐immobilize multiple enzymes, a wide range of nanomaterials has been designed to achieve synergistic enzyme activity and enhance catalytic efficiency. Nanomaterials, as carriers for enzyme co‐immobilization, possess various advantages such as tunable morphology and size, high specific surface area, and abundant chemically active sites. They can significantly enhance enzyme stability, activity, and catalytic efficiency. We overview the commonly used methods and strategies of enzyme co‐immobilization. This review further summarizes the latest research advances in nanomaterials for enzyme co‐immobilization applications over the past 5 years. Meanwhile, the advantages and challenges of these nanomaterials used for enzyme co‐immobilization as well as some potential future directions are also discussed.

Green immobilization: Enhancing enzyme stability and reusability on eco-friendly support

In the current years of heightened focus on green chemistry and sustainable materials, this study delves into the untapped potential of hyaluronic acid (HA), chitin, and chitosan-prominent polysaccharides for groundbreaking applications. The primary aim is to effectively immobilize catalase enzymes onto matrices composed of chitosan, chitin, HA/chitin, and HA/chitosan. The rigorous investigation covers a spectrum of structural enhancements encompassing pH and temperature stability, thermal resilience, half-life extension, storage durability, reusability, and comprehensive FTIR analyses of the catalase immobilization. Notably, catalase activity demonstrated remarkable resilience on HA/chitin and HA/chitosan matrices, maintaining 73.80% and 79.55% efficacy even after 25 cycles. The introduction of covalent cross-linking between catalase and HA/chitin or HA/chitosan, facilitated by a cross-linking agent, significantly amplified stability and recycling efficiency. Consequently, the immobilized catalase showcases substantial promise across a spectrum of industrial applications, spanning from food and detergent production to bioremediation and diverse commercial processes. This underscores its pivotal role as a versatile and invaluable innovation in the realm of sustainable technologies.