Environmental Issues Research Articles

Evaluating the deformation modulus at representative elementary volume using electrical resistivity tomography

The deformation modulus of rock mass is an essential parameter for evaluating the bearing capacity and deformations. A deformation modulus obtained through conventional approaches, including empirical equations and in situ tests, cannot present the deformation modulus at representative elementary volume (DREV) due to limited test coverage and technical difficulties in harsh geological or topographic conditions. This study utilized electrical resistivity (ER) tomography and numerical back-analysis to investigate DREV at the Asmari-Jahrum formation. We employed geoelectrical contrasts to detect proper locations for installing extensometers at excavated galleries. The deformations recorded by extensometer were used to back-calculate the DREV values by finite difference numerical modeling. We established a correlation between ER and DREV to predict DREV, which were 30–80 % more accurate than those obtained through conventional approaches at the study site. The tested area, anisotropy, creep, ER inaccuracies, and plastic deformations are evaluated as statistically significant factors that can influence DREV. Our methodology provides a systematical approach to assess DREV, which applies to geoengineering projects within the Asmari-Jahrum formation or similar sedimentary units (ER below 200 Ω⸱m). This methodology is also replicable for other geological formations with harsh geology or limited access without exposing an extreme financial burden or environmental issues.

Policy, innovation, market or behavior driven effects: energy green transition and environmental management in Chinese heterogeneous cities

Energy green transition (EGT) is currently one of the main measures for countries around the world to address the contradiction between economic growth and increasingly deteriorating environmental and climate issues. Cities are the center of energy consumption. The key to EGT lies in urban energy green transition. Therefore, the focus of this study is on the driving mechanism of urban EGT. Firstly, the spatial-temporal characteristic of EGT in Chinese heterogeneous cities is analyzed by using methods such as gravity model. Secondly, the possible paths includes policy driven, innovation driven, market driven, and behavior driven for urban EGT are discussed through theoretical analysis. Finally, combined with panel data of 236 Chinese cities in 2007-2022, this study empirically analyzes the complex driving mechanism of urban EGT. Results show that: (1) The EGT in Chinese cities is continuing. From the perspective of urban heterogeneous, EGT in 1-tier and 2-tier cities is significantly faster than that in 3-, 4-, and 5-tier cities. The EGT speed in eastern cities is the fastest, while that in northeastern cities is the slowest. The difficulty of EGT in energy resource-based cities is actually the greatest. From the perspective of spatial features, the spatial center of EGT in Chinese cities generally shows a changing trend from northwest to southeast. (2) Policy driven, innovation driven, market driven, and behavior driven constitute the complex driving mechanism of urban EGT, and policy driven is the primary driving force for this round of EGT. (3) Positive effect of economic development level and education level improvement on EGT in Chinese cities is significant while resource endowment and population agglomeration level exhibit significant inhibitory effects. (4) There are significant differences in the core driving force for EGT in heterogeneous cities. Both policy driven effect and market driven effect have the highest impact in 1- and 2-tier cities. Innovation driven effect, market driven effect, and behavior driven effect are only significant in eastern and central cities. In energy resource-based cities, innovation driven effect of green innovation is not significant. This study can assist government departments better in formulating relevant policies to support energy transition, promote technological innovation, design market mechanisms, and guide energy consumption behavior.

Synergistic Role of Indium Doping and g-C3N4 Reinforcement in Boosting the Visible Light-Triggered Rhodamine B and Diclofenac Sodium Salt Degradation over Rare Earth Molybdate

Designing and fabricating cost-efficient and eco-friendly photocatalysts for removing organic pollutants from wastewater streams is a crucial research objective for effectively managing industrial effluents to tackle environmental sustainability issues. In this study, we prepared bare cerium molybdate (Ce2(MoO4)3, M1) and indium-doped cerium molybdate (In- Ce2(MoO4)3, M2) photocatalysts via a hydrothermal method. We then synthesized a nanocomposite of In- Ce2(MoO4)3 (M3) with the promising material graphitic carbon nitride (g-C3N4) using an ultrasonication approach. The synthesized photocatalysts were effectively applied to degrade the Rhodamine B dye and diclofenac sodium salt (a drug) from synthetic industrial wastewater through a photocatalysis approach. The impact of indium (In3+) doping on the bare (Ce2(MoO4)3 and the strong interaction between the (In-Ce2(MoO4)3 and g-C3N4 nanosheets were analyzed through physical and electrochemical techniques, including SEM, EDS, XRD, FTIR, UV-Vis spectroscopy, and EIS analysis. The comprehensive photocatalytic degradation of dye and the drug via first-order kinetic parameters under visible light irradiation for all the prepared catalyst samples was evaluated. The nanocomposite In-Ce2(MoO4)3/g-C3N4 exhibited excellent photocatalytic activity, degrading the maximum amount of RhB dye and drug (RhB:96%, drug:87%) in 90 minutes with a higher rate constant (k) compared to In-Ce2(MoO4)3 (RhB:69%, drug:56%) and Ce2(MoO4)3 (RhB:56%, drug:38%). Furthermore, the In-Ce2(MoO4)3/g-C3N4 samples produced a 7-fold and 3-fold increase in transient photogenerated current response compared to pristine Ce2(MoO4)3 and In-Ce2(MoO4)3 samples, respectively. These findings pave the way for synthesizing an economical, versatile, and efficient In-Ce2(MoO4)3/g-C3N4 photocatalyst to eliminate pollutants from industrial wastewater streams and boost environmental sustainability.

Investigation of serpentine entrainment reduction in pentlandite flotation using eco-friendly sodium alginate in suspension dispersion systems

Magnesium silicates pose severe environmental issues in hydrometallurgical processes. Copper-nickel sulfide ores are the primary source for nickel production, but their increasingly complex properties make separation difficult, causing slimy magnesium silicate minerals to be entrained into the concentrate with the foam, leading to magnesium contamination. Studies have found that sodium alginate (SA), as an environmentally friendly polymer reagent, can effectively inhibit serpentine. This work investigates the effect of SA on the flotation behavior of pentlandite and serpentine in a sodium hexametaphosphate (SHMP) system. Sedimentation tests show that only a low dosage of SA can effectively settle serpentine, while excessive SA disperses serpentine. Flotation tests indicate that SA can further increase the difference in recovery rates between pentlandite and serpentine based on SHMP. Results from artificial mixed ore tests demonstrate that the recovery rate of serpentine decreases from 51.22% to 37.37% with the addition of SA, with minimal impact on the recovery rate of pentlandite. To explain the impact of the SA adsorption process on the mineral states, the following tests and analyses were conducted: TOC and QCM-D results indicate that SA mainly adsorbs onto serpentine, forming rigid adsorption at low dosages and flexible adsorption at high dosages. Zeta potential tests reveal changes in the surface potential of the minerals, explaining the transition from electrostatic attraction to electrostatic repulsion between pentlandite and serpentine. FTIR and XPS results show that SA chemically reacts with the Mg and Si sites on the serpentine surface through its -COO- groups. In summary, in the SHMP system, the use of gel adsorption and the chemical interaction of SA to coagulate and depress serpentine reduces its entrainment into the concentrate, achieving efficient separation of pentlandite and serpentine. However, high dosages of SA do not yield satisfactory results.

Potencial bioindicador de mudas de Cedrela fissilis em áreas contaminadas por cobre

ABSTRACT Soil contamination with toxic metals brings along severe environmental issues. Among these metals, copper (Cu) is harmful to plant development when it reaches high contamination levels in the soil. Thus, identifying species capable of resisting this contamination type helps these sites’ revegetation and decontamination processes. Therefore, the present study aimed to investigate the tolerance of Cedrela fissilis plants to excess Cu through morphophysiological and biochemical variables. C. fissilis seedlings were subjected to five concentrations of Cu (0, 2, 4, 6, and 8 mg L-1). The experimental design was completely randomized, with five treatments and four repetitions. Morphophysiological (number of leaves, shoot height, root length, dry weight, morphological variables of the root system, and leaf area) and biochemical (antioxidant enzymes, lipid peroxidation, hydrogen peroxide concentration, and photosynthetic pigments) traits and Cu accumulated in roots and shoot were evaluated. High concentrations of Cu had a negative effect on the shoot and root dry weight, photosynthetic rate, stomatal conductance, and transpiration rate. Overall, Cu increased the activity of the antioxidant enzymes and lipid peroxidation. Therefore, Cu incidence in the nutrient solution has negatively influenced the biochemical and physiological traits of C. fissilis seedlings to the detriment of their growth. Thus, it was possible to identify sensitive behavior by the investigated species. Because of these features, C. fissilis seedlings can be used as markers for copper-contaminated areas.

Salinity drives niche differentiation of soil bacteria and archaea in Hetao Plain, China

Soil salinization is a critical environmental issue that limits plant productivity and disrupts ecosystem functions. As important indicators of soil environment, soil microbes play essential roles in driving nutrient cycling and sustaining ecosystem services. Therefore, understanding how microbial communities and their functional potentials respond to varying levels of soil salinization across different land use types is crucial for the restoration and management of salt-affected ecosystems. In this study, we randomly selected 63 sites across the Hetao Plain, covering an area of ∼2500 km2. Our results showed that both salinity- and fertility-related soil parameters were significantly correlated with bacterial and archaeal diversities, with soil salinity emerging as the stronger predictor of prokaryotic diversity. Intriguingly, bacterial and archaeal communities were tightly interlinked but displayed opposite trends in response to environmental factors, indicating a clear microbial niche differentiation driven by soil salinity. Moreover, the generalist functions of bacteria and archaea (e.g., chemoheterotrophy) exhibited contrasting responses to environmental parameters, while their specialist functions (e.g., nitrification) responded consistently. These findings highlight the pivotal role of soil salinity in shaping the niche differentiation of bacterial and archaeal communities in saline soils, providing insights to guide salinity-centered restoration strategies for effective marginal land management.

Polymer Nanocomposites: A Review on Recent Advances in the Field of Green Polymer Nanocomposites

Abstract: In order to address environmental issues, polymer nanocomposites are becoming more and more popular because of their remarkable functionality. Their use in various fields is highlighted by their special physicochemical features (i.e., stability, high reactivity, robustness, regenerability, etc.), conductivity, electronic compatibility, quick interfacial contacts, simplicity of functionalization, simplicity of synthesis, interface-to-volume ratio, and low cost. Green polymer nanocomposites have drawn a lot of attention for use in a variety of applications to preserve the environment. Because they are made of eco-friendly materials, they are frequently utilised in the automobile, building, packaging, and medical industries. Eco-friendly solutions to the problems caused by plastic trash are biodegradable polymers produced from renewable sources (microbes, plants, and animals). Plant fibres and natural resins are combined to create green composite materials. These fibres and resins used in green composites can be broken down by bacteria. The mixing of natural fillers and organic polymers results in green polymer nanocomposites with distinct characteristics. This review is anticipated to be comprehensive, compelling, and practical for the scientists and business professionals who collaborate to address a variety of environmental problems on a global scale using green polymer nanocomposites.

Mass flow and ecological risk of heavy metals in anaerobic digestion of food waste

Conversion of food waste (FW) to bioenergy via anaerobic digestion (AD) has become a topic of worldwide research interest. However, the content, distribution, and speciation of heavy metals (HMs) in feedstock and digestate samples throughout the AD process are currently unknown. Especially, the potential ecological risk (PER) of solid digestate with potential of land application was vague. Mass flow of HMs (Cr, Cu, Mn, Ni, Zn, As, Cd, Hg, and Pb) were estimated in a two-stage wet AD of FW plant in Shenzhen, China. Furthermore, the PER of the HMs in solid digestate (SD) was studied. The findings revealed that the variation in the HM contents of the intermediates, as well as the comparatively high HM contents of the SD, were mostly influenced by the total solid contents of the samples, since HMs tend to adhere to the solid matrix. As per mass balance, the Cr and Ni contents of the digestate samples were 4.7 and 5.5 times higher than in the feedstock samples, respectively. The remaining metals were within the range of 82.2126.1%. Furthermore, the enrichment of HMs in SD must be resolved before reclamation. Moreover, the PER of the HMs in SD was 279.6, considered as a considerable risk level, of which Hg and Cd contributed 46.3% and 33.6%, respectively. This research presents a case study for quantitatively assessing the distribution of typical pollutants throughout the AD process, and it offers preliminary data for potential environmental issues caused by digestion product recycling.

Incorporating perovskites in photovoltaic-powered electrochemical cells for a sustainable future: An inclusive review

Due to the escalating demand for energy across all sectors, traditional energy sources are proving insufficient to meet our requirements. Moreover, their extensive use is exacerbating environmental issues. Consequently, solar energy has garnered significant attention due to its affordability, cleanliness, and abundance. This review presents an analysis of various solar cell systems, comparing their efficiency, cost, and stability based on literature spanning the past decade. While perovskite-based solar cells have demonstrated promising performance in laboratory settings, challenges with stability hinder their industrial-scale implementation. On the other hand, perovskites exhibit favorable catalytic properties, making them suitable for the electrochemical reduction of CO2. To address stability concerns, this review proposes structural engineering approaches aimed at maximizing electricity generation from solar energy to power electrochemical cells for CO2 reduction in the environment.

Evaluation of large-scale poultry manure-derived biochar for efficient cadmium removal in zinc smelter wastewater

Cadmium (Cd), a carcinogen, is released from industrial activities like metal refineries and battery runoff, with significant contamination reported near zinc smelters in Korea. This study addresses the issue using an efficient, economical adsorption process with waste-derived biochar-based adsorbents known for high Cd removal. Poultry manure (PM), typically used as fertilizer, can lead to environmental pollution if mismanaged; therefore, it was pyrolyzed to produce biochar. The resulting poultry manure biochar (PMBC) was produced on a large scale (15 ton/day), demonstrating feasibility for large-scale implementation. The effectiveness of PMBC as an adsorbent for Cd was evaluated using wastewater discharged from a zinc smelter. The Cd adsorption capacity of PMBC (60.39 mg/g) was lower than that (302.0 mg/g) of hen manure biochar produced at a laboratory scale in our previous study but was comparable to other biochars reported in the literature. Response surface methodology analysis indicated that reaction time, dose, and agitation significantly influenced Cd removal by PMBC, whereas pH had a negligible impact. Notable contributions to Cd adsorption include the release of K+ from PMBC and the presence of O-containing functional groups. Under continuous flow conditions with real wastewater, Cd was not detected in the effluent for the initial 8 h, and PMBC sustained a removal efficiency of 40.77% until saturation was reached. The results from wastewater treatment and large-scale biochar production offer valuable insights into the potential of biochar as a medium for addressing environmental issues in real-world applications.

Moment Curvature and P-M Interaction Analysis of Steel and GFRP Reinforced Concrete Column

This research explores the use of Glass Fiber Reinforced Polymer (GFRP) bars and GFRP circular sections as longitudinal reinforcement in Reinforced Concrete (RC) columns, specifically to mitigate corrosion issues in harsh coastal environments. Twelve concrete specimens were prepared and tested under various loading conditions to evaluate the performance of GFRP as a substitute for conventional steel reinforcement. The experimental findings indicated that GFRP-RC columns displayed slightly lower axial load and bending moment capacities compared to steel-RC columns, though the ductility of both types was found to be similar. The study also highlights the significance of considering the role of GFRP bars in compression, supported by experimental results. This research offers valuable insights into the behavior and performance of both steel and GFRP-reinforced concrete columns, particularly in environments vulnerable to corrosion, with assessments conducted at 28 and 60-day intervals. A comparison of the outcomes from these timeframes reveals the effectiveness of GFRP as a reinforcement option in corrosive conditions

Mobile-Controlled River Cleaning Robot: A Review

This project focuses more on "Remote Controlled Unmanned River Cleaning Bot". In India water pollution is increasing day by day, Water pollution is a significant environmental issue, with rivers often acting as the primary carriers of waste materials such as plastics, debris, and other pollutants. Current manual cleaning methods are inefficient, costly, and other pollutants. Current manual cleaning methods are inefficient, costly, and unable to access certain areas of the water. This paper presents the development of a mobile-controlled river cleaning robot designed to tackle these challenges. The robot can be remotely operated via a mobile application, allowing for precise control of its navigation and cleaning operations. It is equipped with waste collection mechanisms and sensors to detect and remove debris from the river’s surface. The study covers the design, hardware and software components, and testing of the robot in real-world conditions. Results indicate that the mobile-controlled robot offers an effective, cost-effcient, and environmentally sustainable solution for maintaining cleaner waterways. This innovation has the potential to revolutionize river cleaning processes and significantly reduce water pollution.

A critical Review on Advanced Membrane Bioreactors for Wastewater Treatment: Fouling Reduction and Energy Demand

Objectives:Rapid industrialization has highlighted the importance of addressing environmental issues and the increasing demand for water supply. As a result, innovative solutions to improve water circulation management in both public and industrial sectors have been proposed, one of which is the introduction of Membrane Bioreactor (MBR) technology. This study aims to understand the mechanisms and characteristics of membrane fouling in MBR processes and compare the associated energy consumption, with the goal of improving process efficiency and energy performance.Methods:In this study, various factors influencing the MBR process were considered to analyze the mechanisms and characteristics of membrane fouling. The impact of fouling on the process was assessed, and energy consumption was compared. Specifically, the power consumption of flat-sheet and hollow-fiber MBRs was analyzed, focusing on the proportion of energy used for microbial treatment and membrane cleaning. The Specific Energy Demand (SED) was calculated to evaluate the energy consumption efficiency of different fouling control methods in MBRs.Results and Discussion:In typical MBR processes, 68.0% (flat-sheet) and 53.0% (hollow-fiber) of the power consumption is attributed to air scouring for microbial treatment and membrane cleaning. Notably, 57.0% (flat-sheet) and 36.0% (hollow-fiber) of the power is consumed to supply air for detaching adhered foulants to maintain filtration performance. These results indicate that aeration is a major energy consumer in MBR processes. SED is a critical indicator for assessing the energy consumption of specific fouling control methods, with typical MBR processes having an SED of 0.2-0.3kWh/m3. In contrast, using a non-aerated membrane module with reciprocating inertial force for fouling control reduces SED to 0.005-0.01 kWh/m3, representing a 20-60 fold decrease in energy consumption, highlighting the need for energy reduction.Conclusion:This study provides insights into fouling reduction characteristics in MBR processes, suggesting a new paradigm for enhancing the economic feasibility of MBR technology. Applying non-aerated membrane modules to reduce energy consumption can significantly improve MBR efficiency, contributing to energy reduction and environmentally friendly technology development. Therefore, strategies to maximize energy efficiency and minimize environmental impact in MBR processes are essential.

Analysing Amitav Ghosh’s <i>Gun Island</i> as a Climate Fiction: Transgressing ‘Borders’ and ‘Orders’ by the Humans and Nonhumans

Amitav Ghosh has a tendency to write literary pieces focusing on climate issues. This aspiration is also manifested in his novel Gun Island (2019). The author allegorizes the myth of Manasa Devi, which creates a wonderful connection between humans and natural environment in this novel. Gun Island (2019) explores the conviction of diversified environmental issues, such as environmental injustice, migrant ecologies, and climate refugees. Although natural disasters occur more or less everywhere in the world, the poor pay the highest price. The harsh reality is that the most affected are the most marginalized regions of underprivileged countries. Developed countries can still cope with its effects, but people in poor countries are persistently being displaced. The Sundarbans is one such magnificent instance in Gun Island. Overall, Ghosh has shown that migration of humans and nonhumans occurs simultaneously as a result of climate change. Humans and nonhumans transgress the precincts of ‘border’ as well as ‘order’ to migrate from one place to another eco-friendly place. His perplexing story of Gun Island is inexplicably mythical but contextually practical because it resonates with a group of Asian and African people’s own experiences, emotions and their yearning for migration to Europe due to climate change. This borderless migration cannot be stopped by any means of order.

Progress on Si‐based photoelectrodes for industrial production of green hydrogen by solar‐driven water splitting

AbstractSolar power has been regarded as the ultimate green‐energy source because of its inexhaustibility and eco‐friendliness. The solar‐driven water‐splitting technology for green hydrogen production is considered to be one of effective ways for solar energy harvesting and storage, which may provide solutions for the energy crisis and environmental issues. In the past decades, great progress has been achieved in this area. Photoelectrochemical (PEC) water splitting is especially promising for the production of solar fuels because of expected large‐scale industrial application. Silicon (Si), as an ideal candidate for the photoelectrode, is the most suitable material for the PEC device in industrial photocatalytic water splitting because of its abundance, mature fabrication technology, and suitable band gap. Here, we give a systematic review on the recent progress for Si‐based photoelectrodes for water splitting with a focus on the industrial application. Particularly, the strategies, such as band‐alignment control, morphology design, and surface engineering, are summarized to enhance the PEC performance and durability for practical application. Furthermore, the perspective for the design of commercial Si‐based PEC devices with high PEC performance, long‐term stability, large‐size, and low cost are given at the end, which shall guide the development of PEC water splitting for industrial application.

Biocatalytic Potential of Pseudomonas Species in the Degradation of Polycyclic Aromatic Hydrocarbons.

Polycyclic aromatic hydrocarbons (PAHs), one of the major environmental pollutants, produced from incomplete combustion of materials like coal, oil, gas, wood, and charbroiled meat, that contaminate the air, soil, and water, necessitating urgent remediation. Understanding the metabolic pathways for PAHs degradation is crucial to preventing environmental damage and health issues. Biological methods are gaining increasing interest due to their cost-effectiveness and environmental friendliness. These methods are particularly suitable for remediating PAHs contamination and mitigating associated risks. The paper also outlines the processes for biodegrading PAHs, emphasizing the function of Pseudomonas spp., a kind of bacterium recognized for its capacity to degrade PAHs. To eliminate PAHs from the environment and reduce threats to human health and the environment, Pseudomonas spp. is essential. Understanding the mechanism of PAH breakdown by means of microbes could lead to effective clean-up strategies. The review highlights the enzymatic capabilities, adaptability, and genetic versatility of the genes like nah and phn of Pseudomonas spp., which are involved in PAHs degradation pathways. Scientific evidence supports using Pseudomonas spp. as biocatalysts for PAHs clean-up, offering cost-effective and eco-friendly solutions.

Sustainable leadership: empowering green organizational citizenship behaviour through employee green value in the Indian healthcare sector

Purpose Leadership is crucial for promoting employees’ environmental behaviour, essential for implementing sustainability initiatives. Academics and practitioners emphasize the need for integrated top-to-bottom actions to address environmental issues effectively. Thus, the purpose of this study is to investigate how Environment-Specific Servant Leadership (ESSL), via Employee Green Value (EGV), promotes Green Organizational Citizenship Behaviour (GOCB). Design/methodology/approach The present study adopted a quantitative cross-sectional approach. Additionally, a total of 333 data points were collected from employees working in various hospitals in Ranchi, India. The data and hypothesized relationships were analysed using PLS-SEM with SmartPLS 4.0 software. Findings The present results indicate that ESSL has a notable direct effect on employees’ GOCB. Moreover, EGV was identified as a partial mediator in the relationship between ESSL and GOCB. Practical implications The findings imply that leaders who prioritize sustainability and exhibit environmentally responsible behaviour, along with employees who value and prioritize green initiatives, can create a workplace that value pro-environmental practices. In this workplace employees are also likely to demonstrate green organizational citizenship behaviour, therefore promoting sustainable practices and outcomes. Originality/value This study provides valuable insight into the individual psychological mechanisms that drive voluntary participation in environmental protection and conservation efforts. Furthermore, the study also highlighted the relationship between ESSL, EGV and GOCB in terms of their work environment as well as highlighting the potential for organizations to create a more sustainable and socially responsible workplace.

One Health in Europe: from concept to practice

Abstract The One Health concept is a comprehensive approach that highlights the interconnectedness of human, animal, and environmental health. Understanding these interrelationships is essential for effectively managing and mitigating emerging health threats. This approach emphasizes that health issues arise from a complex web of interactions involving humans, animals, and ecosystems. Emerging health threats, such as zoonotic diseases (e.g., mpox, Ebola, avian influenza), antibiotic resistance, and environmental degradation, pose significant risks to global health. Zoonotic diseases, which are transmitted between animals and humans, highlight the direct links between animal and human health. The increase in antibiotic resistance, driven by overuse in both human medicine and livestock farming, leads to the rise of resistant pathogens. Environmental issues like climate change, deforestation, and pollution further exacerbate these threats by altering habitats, disrupting ecosystems, and affecting disease vectors. Addressing these interconnected challenges requires a unified approach that integrates human, animal, and environmental considerations. For example, climate change can shift the distribution of disease vectors like mosquitoes, leading to the spread of diseases such as malaria and dengue fever. Likewise, deforestation can heighten the risk of zoonotic spillover by bringing humans into closer contact with wildlife. 1. To tackle these complex challenges, several measures are crucial: • Integrated surveillance systems Developing systems that monitor human, animal, and environmental health data collectively can improve early detection of outbreaks. Sharing information across sectors is a prerequisite for effective identification of emerging threats. • Strengthening veterinary and public health collaboration Joint research, surveillance, and outbreak management efforts can lead to a more coordinated approach to health emergencies. • Promoting One Health education and training Educating professionals in various fields fosters a collaborative approach to health issues. Training programmes can build a shared understanding of health interconnections. • Implementing sustainable environmental practices Adopting sustainable practices to address environmental degradation helps reduce risks associated with habitat destruction and pollution. • International collaboration and agreements facilitate resource sharing, information exchange, and best practices. 2. To enhance public health strategies within the One Health framework: • Enhance interdisciplinary research Promote research on the intersections of human, animal, and environmental health to understand how changes in one area affect others and to develop more effective interventions. • Foster community engagement Engage communities to improve the adoption of preventive measures and build resilience against health threats through public awareness and community-based programs. Leverage technology and innovation Innovations can offer valuable insights such as data analytics, remote sensing, and genomic surveillance. In our upcoming plenary session, experts from veterinary and public health sciences will present practical examples on One Health collaboration in Europe and discuss how to address challenges in implementing the approach. Moderator Ricardo Mexia Chair of the 17th EPH Conference 2024, President EUPHA Infectious diseases control section Keynote speaker Lorena Boix Deputy Director-General, Directorate General for Health and Food Safety (DG SANTE), European Commission Speakers/Panellists Stef Bronzwaer Cross-Agency One Health Task Force, European Food Safety Authority (EFSA) Barbara Häsler Royal Veterinary College, UK Susana Guedes Pombo Chief Veterinary Officer, Portugal, President World Organization for Animal Health (WOAH) Eva Zažímalová Member of European Commission's Group of Chief Scientific Advisors, Professor of Plant Anatomy and Physiology, Charles University, Czech Republic

Eco-anxiety: an additional burden for university students?

Abstract Background Eco-anxiety encompasses climate change anxiety, including global warming, as well as anxiety about a multiplicity of environmental disasters, which not be directly caused by climate change The objective is to assess eco-anxiety in healthcare and non healthcare students and investigate a relationship with health behaviour, mental health, and environmental opinion. Methods A cross-sectional study was conducted among voluntary university students in the Rouen University in Normandy, France. Volunteer healthcare students aged 18 years and older were included. Eco-anxiety was assessed with the Hogg Eco-Anxiety Scale (HEAS-13). Socio-demographics, health behavior, mental health and healthcare data were also collected. Results A total of 1,887 students were included with 74.3% of women and a mean age of 21.1 years (SD = 6.8). The HEAS-13 mean was 13.2 (SD = 2.6): affective symptoms 4.1 (SD = 2.7), eco-rumination 3.7 (SD = 2.4), behaviour 1.0 (SD = 1.5), and anxiety about one’s personal impact on the planet 4.4 (SD = 2.5). Respectively, 59.6% and 31.4% of students are moderately and very much involved in pro environmental-behaviour. 84.6% of students will consider environmental issues in their career choices. Eco-anxiety was associated with being a woman, being in curricula other than health, accommodation with roommates or in couple, use of cannabis, eating disorders, insomnia, emotional exhaustion, cynicism, depression, quality of life, and visiting a general practitioner for stress. Conclusions An high eco-anxiety was associated with impaired mental health and could be an additional burden for university students. Intervention options for those that do experience eco-anxiety and suffering can be as prescribing environmental action, mental health skills, and climate change resolution without imposing the burden of change solely on young people Key messages • A high eco-anxiety is prevalent among university. • The eco-anxiety impaired mental health that could be an additional burden for university students.

Application of Nitrate–Ammonium Nitrogen Fertilization Reduced Nitrogen Loss in Surface Runoff and Infiltration by Improving Root Morphology of Flue-Cured Tobacco

Nitrogen loss in water from farmland has become an environmental issue. Nitrogen fertilizer is the main cause of agricultural non-point source pollution in the Lake Basin, Yunnan. However, it is unclear how different nitrogen fertilizer forms affect water loss from farmland and how the root systems of crops respond. We established five nitrogen fertilizer treatments (100–0% [T1], 75–25% [T2], 50–50% [T3], 25–75% [T4], and 0–100% [(T5)] nitrate–ammonium) and performed an investigation to determine nitrogen loss in water and root morphological parameters of tobacco in Mile County and Chengjiang County. Compared with in the T1, T4, and T5 treatments, the total nitrogen loss in surface runoff was reduced by 4.67%, 11.85% and 9.56% in the T2 treatment and 27.32%, 23.20%, and 31.43% in the T3 treatment, respectively. Similar results were observed for the nitrogen loss due to infiltration. The root biomass was negatively correlated with nitrogen loss. There was greater root biomass, root surface area, and root spatial distribution in T2 and T3 compared with in T1, T4, and T5. These results indicate that 50–50% nitrate–ammonium nitrogen fertilizer can facilitate the root growth of tobacco and reduce nitrogen loss, which provides a reference for agricultural sustainable development.