Environmental Chemistry Research Articles

Effect of Insecticide Exposure Across Multiple Generations of the Earthworm Eisenia andrei.

The toxicity of neonicotinoids and many of their replacement insecticides to nontarget soil invertebrates such as earthworms has previously been established. However, the long-term effects of these substances on these organisms are largely unknown. In the field of soil ecotoxicology, lumbricid earthworms such as Eisenia andrei are used extensively due to the availability of standardized test methods and their adaptability to laboratory culture and testing. Multigenerational studies have gained popularity and attention in recent years, with a shift toward the use of long-term assays and lower concentrations of test chemicals. The use of exposure concentrations that include those measured in a monitoring program carried out by the Government of Ontario presents a realistic exposure scenario that may not show significant effects in contemporary, shorter term studies. We used current standardized test methods as a basis for the development of multigenerational studies on E. andrei. The effects of exposure to a single application of the insecticides thiamethoxam and cyantraniliprole on the survival and reproduction of E. andrei were observed over three (thiamethoxam) or two (cyantraniliprole) generations using consecutive reproduction tests. No significant impacts on adult survival were reported in any generation for either insecticide, whereas reproduction decreased between the first and second generations in the thiamethoxam test, with median effective concentration (EC50) values of 0.022 mg/kg dry weight reported for the first generation compared with 0.002 mg/kg dry weight in the second generation. For cyantraniliprole, an EC50 of 0.064 was determined for the first generation compared with 0.016 mg/kg dry weight in the second generation. A third generation was completed for the thiamethoxam test, and a significant decrease in reproduction was observed in all treatments and controls compared with previous generations. No significant difference between thiamethoxam treatments and the control treatment was reported for the third generation. Collectively, these data indicate that exposure of oligochaetes to these two insecticides at concentrations representative of field conditions may result in long-term stresses. Environ Toxicol Chem 2024;43:2058-2070. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Bridging the Gap Between Human Toxicology and Ecotoxicology Under One Health Perspective by a Cross-Species Adverse Outcome Pathway Network for Reproductive Toxicity.

Although ecotoxicological and toxicological risk assessments are performed separately from each other, recent efforts have been made in both disciplines to reduce animal testing and develop predictive approaches instead, for example, via conserved molecular markers, and in vitro and in silico approaches. Among them, adverse outcome pathways (AOPs) have been proposed to facilitate the prediction of molecular toxic effects at larger biological scales. Thus, more toxicological data are used to inform on ecotoxicological risks and vice versa. An AOP has been previously developed to predict reproductive toxicity of silver nanoparticles via oxidative stress on the nematode Caenorhabditis elegans (AOPwiki ID 207). Following this previous study, our present study aims to extend the biologically plausible taxonomic domain of applicability (tDOA) of AOP 207. Various types of data, including in vitro human cells, in vivo, and molecular to individual, from previous studies have been collected and structured into a cross-species AOP network that can inform both human toxicology and ecotoxicology risk assessments. The first step was the collection and analysis of literature data to fit the AOP criteria and build a first AOP network. Then, key event relationships were assessed using a Bayesian network modeling approach, which gave more confidence in our overall AOP network. Finally, the biologically plausible tDOA was extended using in silico approaches (Genes-to-Pathways Species Conservation Analysis and Sequence Alignment to Predict Across Species Susceptibility), which led to the extrapolation of our AOP network across over 100 taxonomic groups. Our approach shows that various types of data can be integrated into an AOP framework, and thus facilitates access to knowledge and prediction of toxic mechanisms without the need for further animal testing. Environ Toxicol Chem 2024;00:1-14. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Synthesis of a perylene diimide functionalized Sb2S3 nanocomposites and its application as a peroxidase mimic for colorimetric detection of H2O2 and glucose

N, N’-di (L-glutamic amine)-perylene-3,4,9,10-tetracarboxylic diimide (GAPDI) functionalized Sb2S3 nanocomposites (GAPDI-Sb2S3) were fabricated using a hydrothermal method and characterized. GAPDI-Sb2S3 nanocomposites can catalyze the oxidation of 3,3′,5,5′- tetramethyl benzidine (TMB) by H2O2. The experimental conditions including pH and temperature were optimized. GAPDI-Sb2S3 nanocomposites showed a strong affinity for TMB substrates, and their catalytic activity followed the Michaelis–Menten kinetics. The experimental results showed that GAPDI-Sb2S3 nanocomposites exhibited a low detection limit (LOD = 0.39 μM) and high sensitivity for H2O2 detection and showed good response to glucose detection with a LOD of 0.42 μM over arrange of 2–10 μM. These findings suggest broad application prospects in the fields of environmental chemistry, biotechnology, and biomedicine.

Coordination structures and stabilities of Am(III) adsorption complexes at kaolinite(0 0 1)-water interface

Understanding the structures and stabilities of actinide species is crucial for comprehending the sorption mechanisms at mineral–water interfaces. However, the relevant molecular-level fundamental aspects of actinide coordination chemistry at the mineral–water interface remain unclear. We herein conduct a systematic theoretical study of coordination structures and adsorption energies of Am3+ and Am(OH)2+ sorption complexes at the kaolinite(001)-water interface by integrating static density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations. Computational results show that stable outer- and inner-sphere adsorption complexes are respectively formed through hydrogen bonding and coordinate bonding with surface aluminol groups. The most stable inner-sphere species are predicted to be tridentate surface complexes with an eight-folded coordination structure in the first coordination sphere of Am(III). This work deepens the understanding of Am(III) adsorption and complexation behaviors at the mineral–water interface, providing essential insights for actinide migration in natural environments and nuclear waste disposal. The synergy between static DFT calculations for initial screening and AIMD simulations for comprehensive dynamic analysis in this work enhances the efficiency and accuracy of theoretical predictions for actinide environmental chemistry and can be helpful for the broader research fields of geochemistry and environmental science.

Progress in the environmental risk assessment of plant protection products in Brazil: An overview of birds and mammals and soil organisms proposals.

Since 2019, the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA) has actively developed pesticide environmental risk assessment (ERA) frameworks adapted to Brazil's specific ecological contexts. This initiative, supported by funding from the Brazilian Ministry of Justice and in partnership with academic institutions, has led to a concerted effort to establish ERA protocols for various taxa, including birds and mammals, soil organisms, aquatic organisms, and reptiles and amphibians. The outcomes of this initiative were disseminated in two distinct workshops held in February and November of 2023, where the agency showcased its research to the technical-regulatory community. This article synthesizes the proposals for birds and mammals and soil organisms. First, we summarize the agency's proposals for both focal and generic species to be incorporated into the ERA and the methodologies for calculating exposure of these taxa to pesticides through agricultural practices, encompassing seed treatment and foliar applications. On this occasion, IBAMA also disclosed the risk assessment tool that the agency is developing for birds and mammals. IBAMA highlighted the knowledge gaps that must be bridged to progress from preliminary (lower-tier) to more comprehensive (higher-tier) assessments. Regarding soil organisms, during the workshop, the presenters shared findings on the most prevalent species of earthworms and enchytraeids in Brazil. They emphasized the need for additional data collection on a regional scale. The agency has also proposed methods for estimating soil organism exposure to pesticides at a screening level and identified specific data gaps that could be addressed to refine assessments at higher tiers. In summary, the workshop communicated the progress in establishing ERA guidelines, which we encapsulate here to benefit the technical-regulatory community. Integr Environ Assess Manag 2024;20:1793-1799. © 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

A Review of Machine Learning and QSAR/QSPR Predictions for Complexes of Organic Molecules with Cyclodextrins.

Cyclodextrins are macrocyclic rings composed of glucose residues. Due to their remarkable structural properties, they can form host-guest inclusion complexes, which is why they are frequently used in the pharmaceutical, cosmetic, and food industries, as well as in environmental and analytical chemistry. This review presents the reports from 2011 to 2023 on the quantitative structure-activity/property relationship (QSAR/QSPR) approach, which is primarily employed to predict the thermodynamic stability of inclusion complexes. This article extensively discusses the significant developments related to the size of available experimental data, the available sets of descriptors, and the machine learning (ML) algorithms used, such as support vector machines, random forests, artificial neural networks, and gradient boosting. As QSAR/QPR analysis only requires molecular structures of guests and experimental values of stability constants, this approach may be particularly useful for predicting these values for complexes with randomly substituted cyclodextrins, as well as for estimating their dependence on pH. This work proposes solutions on how to effectively use this knowledge, which is especially important for researchers who will deal with this topic in the future. This review also presents other applications of ML in relation to CD complexes, including the prediction of physicochemical properties of CD complexes, the development of analytical methods based on complexation with CDs, and the optimisation of experimental conditions for the preparation of the complexes.

Microbial electrochemical Cr(VI) reduction in a soil continuous flow system.

Microbial electrochemical technologies represent innovative approaches to contaminated soil and groundwater remediation and provide a flexible framework for removing organic and inorganic contaminants by integrating electrochemical and biological techniques. To simulate in situ microbial electrochemical treatment of groundwater plumes, this study investigates Cr(VI) reduction within a bioelectrochemical continuous flow (BECF) system equipped with soil-buried electrodes, comparing it to abiotic and open-circuit controls. Continuous-flow systems were tested with two chromium-contaminated solutions (20-50 mg Cr(VI)/L). Additional nutrients, buffers, or organic substrates were introduced during the tests in the systems. With an initial Cr(VI) concentration of 20 mg/L, 1.00 mg Cr(VI)/(L day) bioelectrochemical removal rate in the BECF system was observed, corresponding to 99.5% removal within nine days. At the end of the test with 50 mg Cr(VI)/L (156 days), the residual Cr(VI) dissolved concentration was two orders of magnitude lower than that in the open circuit control, achieving 99.9% bioelectrochemical removal in the BECF. Bacteria belonging to the orders Solirubrobacteriales, Gaiellales, Bacillales, Gemmatimonadales, and Propionibacteriales characterized the bacterial communities identified in soil samples; differently, Burkholderiales, Mycobacteriales, Cytophagales, Rhizobiales, and Caulobacterales characterized the planktonic bacterial communities. The complexity of the microbial community structure suggests the involvement of different microorganisms and strategies in the bioelectrochemical removal of chromium. In the absence of organic carbon, microbial electrochemical removal of hexavalent chromium was found to be the most efficient way to remove Cr(VI), and it may represent an innovative and sustainable approach for soil and groundwater remediation. Integr Environ Assess Manag 2024;20:2033-2049.© 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Application of Abraham's solvation parameter model to extractables and leachables studies in pharmaceutical and medical device industries: A tutorial

The Abraham's solvation parameter model is an important tool to model and predict distribution properties of compounds in numerous partitioning systems in chemistry, environmental chemistry, medicine, and biology. The evaluation of the distribution properties in extractables and leachables (E&L) studies in pharmaceutical and medical device industries is another major application of this model. This tutorial is aimed at illustrating the applications of the model in E&L studies. Specific examples of the application illustrated in this tutorial include: (a) establishment of equivalent or similar solvents; (b) determination of polarity of solvents, biological tissues, and materials; (c) development of drug product simulating solvents; (d) understanding solvent extraction power for a material; (e) selection of solvent and standards in pretreatment of extraction samples; and (f) chromatography retention prediction for E&L.

ADVANCEMENTS AND INNOVATIONS IN PM2.5 MONITORING: A COMPREHENSIVE REVIEW OF EMERGING TECHNOLOGIES

This comprehensive review examines the evolving landscape of PM2.5 monitoring, emphasizing its critical role in environmental chemistry, public health and electrical/electronic engineering. Traditional methods, including manual sampling, gravimetric analysis, and the Federal Reference Method (FRM), have long been relied upon for PM2.5 measurement but are hindered by limitations in spatial coverage, temporal resolution, and cost. In response, emerging technologies such as wireless sensor networks, low-cost sensor technologies, remote sensing techniques, and machine learning algorithms offer promising solutions to overcome these challenges. Through an analysis of case studies and applications in various environmental settings, including urban areas, industrial zones, and indoor environments, the review highlights the effectiveness of monitoring networks in enhancing spatial and temporal resolution, as well as the need for community engagement and real-time monitoring solutions. Furthermore, technological innovations such as sensor fusion, data analytics, and artificial intelligence hold great promise for improving the accuracy, reliability, and accessibility of PM2.5 monitoring data. Regulatory agencies and policymakers play a crucial role in advancing PM2.5 monitoring by harmonizing monitoring standards, strengthening quality assurance measures, and developing evidence-based regulations to mitigate air pollution and protect public health. In conclusion, international cooperation and collaboration are essential for addressing transboundary air pollution and global environmental challenges. Regional monitoring networks and international agreements provide frameworks for data sharing, standardization of monitoring practices, and collaborative research efforts. To this end, stakeholders can leverage PM2.5 monitoring by adopting new technologies, improving data quality, and supporting evidence-based actions to safeguard public health, the environment, and sustainability

Effect of soil properties on phosphate desorption from some cultivated soils in arid region

<p><span lang="EN-US">Kinetics of soil chemical processes is one of the most important areas in environmental chemistry for metals availability in soils and mechanisms of desorption. Phosphorus (P) is one of the most important macronutrients that control plant growth and crop production. The present study aims to evaluate the influences of soil properties of Alluvial (<em>Typic torrerets</em>) and calcareous (<em>Typic calcids</em>) on the Kinetics of P desorption using batch and anion exchange resin techniques used for P adsorption, which is highly correlated with P uptake by growing plants. Results indicated that P desorption was best described by empirical modified Freundlich (power function) and Elovich equations and, to a lesser degree, by theoretical diffusion and first-order equations. The rate of P desorption from the alluvial soils was positively and highly correlated and largely controlled by clay content (r=0.96<sup>**</sup>) and surface area (r=0.87<sup>**</sup>), as indicated by the simple correlation coefficient and R<sup>2 </sup>in the multiple stepwise regression analysis. These soil properties largely controlled the variations in the kinetic parameters that describe the rate of P desorption and P intensity in the four tested kinetic models. On the other hand, calcium phosphate and active CaCO<sub>3</sub> contents in the calcareous soils were negatively correlated. They largely controlled the variations in the rate and intensity parameters of the kinetic models. These results suggest that surface precipitation on the CaCO<sub>3</sub> surface controls P desorption in calcareous soils, while reversibly, phosphate adsorption on the clay surface controls P desorption in the alluvial soils, which decreases in both cases, crop production.</span></p>

Occurrence and fate of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in an urban aquifer located at the Besòs River Delta (Spain)

Urban aquifers are at risk of contamination from persistent and mobile organic compounds (PMOCs), especially per- and polyfluoroalkyl substances (PFAS), which are artificial organic substances widely used across various industrial sectors. PFAS are considered toxic, mobile and persistent, and have therefore gained significant attention in environmental chemistry. Moreover, precursors could transform into more recalcitrant products under natural conditions. However, there is limited information about the processes which affect their behaviour in groundwater at the field-scale. In this context, the aim of this study is to assess the presence of PFAS in an urban aquifer in Barcelona, and identify processes that control their evolution along the groundwater flow. 21 groundwater and 6 river samples were collected revealing the presence of 16 PFAS products and 3 novel PFAS. Short and ultra-short chain PFAS were found to be ubiquitous, with the highest concentrations detected for perfluorobutanesulfonic acid (PFBS), trifluoroacetic acid (TFA) and trifluoromethanesulfonic acid (TFSA). Long chain PFAS and novel PFAS were found to be present in very low concentrations (<50 ng/L). It was observed that redox conditions influence the behaviour of a number of PFAS controlling their attenuation or recalcitrant behaviour. Most substances showed accumulation, possibly explained by sorption/desorption processes or transformation processes, highlighting the challenges associated with PFAS remediation. In addition, the removal processes of different intensities for three PFAS were revealed. Our results help to establish the principles of the evolution of PFAS along the groundwater flow, which are important for the development of conceptual models used to plan and adopt site specific groundwater management activities (e.g., Managed Aquifer Recharge).

Bacterial toxicity of Acetaminophen and Edaravone, and their binary mixtures: experimental and predicted values using traditional and novel Van Laar-based models

In recent years, the presence of Pharmaceutical Active Compounds (PhACs) in ecosystems has become a serious environmental problem due to their capacity to induce harmful effects at extremely low concentrations in both humans and wildlife. Water treatment plants have not been designed to remove these types of compounds efficiently. Thus, the detection of these pollutants is essential to evaluate their negative impacts and is one of the emerging issues in environmental chemistry. The main objective of this study is to determine the bacterial toxicity of two PhACs (both individually and as a mixture) through the quantification of bioluminescence inhibition in the marine bacteria Aliivibrio fischeri, a commonly used method in short-term toxicity tests. In this work, Acetaminophen and Edaravone, two drugs approved by the Food and Drug Administration, have been studied. The acute toxicity of these PhACs has been tested at two exposure times (5 and 15 min) and different concentrations, by estimation of the median effective concentration (EC50) for each individual compound or in combination at different concentrations. Moreover, the EC50 of the binary mixtures Acetaminophen/Edaravone have been forecast using two traditional predictive models, Concentration Addition and Independent Action. The results show that toxicity decreases with exposure time and depends on the concentration tested. Furthermore, a novel semi-empirical Van Laar-based model has been proposed and validated with the experimental data from this study and literature data, obtaining satisfactory estimations of the EC50 for binary mixtures.

Honeycomb-like triazine-based conjugated microporous polymers exhibiting simultaneous and ultrasensitive detection of fifteen polycyclic aromatic hydrocarbons using solid-phase microextraction technique

BackgroundSince the severe hazard to the ecosystem and widespread distribution through biological and man-made ways of polycyclic aromatic hydrocarbons (PAHs), it is very urgent to establish the ultrasensitive analytical method to quantitatively and directly monitor PAHs in real samples. However, because of the complicated environmental matrix and their trace concentration, the pre-concentration process is a necessary step to analyze of these compounds. In this study, solid phase microextraction (SPME) technique was proposed to separate and enrich fifteen trace PAHs from environmental samples. ResultsIn this work, a honeycomb-like triazine-based conjugated microporous polymers (T-CMPs) were prepared by Yamamoto reaction and firstly used as SPME coating material for the ultrasensitive direct-immersion-SPME of PAHs prior to high performance liquid chromatography-fluorescence detector (HPLC-FLD). The synthesized T-CMPs was characterized using various spectroscopy and electron microscopy techniques. The unique porous network of T-CMPs might deliver abundant adsorption sites for PAHs. Orthogonal experimental design (OED) was used to investigate the influence of four experimental parameters on the enrichment ability. Under optimal situation, a wide linear range (which lasted from 0.003 to 1000 μg L−1) with the coefficients of determination (R2) varying 0.9981 to 0.9993 was obtained. The limits of detection (LODs) for the analytes varied from 0.001 to 1.650 μg L−1, and the limits of quantification (LOQs) were between 0.003 and 4.960 μg L−1. The proposed method was effectively employed to the simultaneous and ultrasensitive detection of fifteen PAHs in industrial wastewaters. The relative recoveries for PAHs analysis varied from 74.6 % to 105 % with the relative standard deviations (RSD) of 0.1 %–7.5 % in real water samples. SignificanceThe prepared SPME coating material exhibited a simultaneous, high extraction and adsorption capacity for fifteen PAHs due to its honeycomb-like porous structure, ultra-large specific surface area, strong π-π stacking, and hydrophobic interactions. The present research developed a novel strategy for the construction of SPME fiber coating composites and demonstrated great application potential in the field of sample pretreatment and environmental analytical chemistry.

Analysis of Students' Understanding of the Carbon Cycle through the GCCDI Approach in Environmental Chemistry Education

This study aims to analyze the understanding of first and second-year Chemistry Education students about the global carbon cycle. The design of this research is descriptive research, using the Global Carbon Cycle Diagnostic Instrument (GCCDI) instrument with 11 questions. The subjects of this study were first- and second-year undergraduate students of Chemistry Education at Bengkulu University, with a total of 15 students in each group. The students' understanding was analyzed qualitatively through the survey method. The data were analyzed and categorized into four groups: understand, misconception, doubt, and do not understand for the GCCDI. The students' understanding was categorized into simple, medium, and complex schemes for the survey method. The results indicated that, for first- and second-year students, respectively, the category of understanding comprised 53.31% and 58% of responses, the misconception category accounted for 22.38% and 27.24%, the doubtful category represented 4.8% and 6.65%, and the category of "does not understand" comprised 19% and 7.85%. The survey method was employed to analyze the responses of first- and second-year students on three schemes: simple (40% and 20%), medium (26.6% and 33.3%), and complex (33.3% and 46.6%). The low level of understanding of the carbon cycle indicates the need for more effective learning approaches, such as in-depth curriculum development, the use of interactive learning methods, and the integration of technology to improve students' understanding of the carbon cycle concept in the broader context of science.

Environmental fate of monosodium methanearsonate (MSMA)-Part 2: Modeling sequestration and transformation.

Monosodium methanearsonate(MSMA), a sodium salt of monomethylarsonic acid (MMA),is a selective contact herbicide used for the control of a broad spectrum of weeds. In water, MSMA dissociates to ions of sodium (Na+) and monomethylarsonate (MMA-)thatis stable and does not transform abiotically. In soils characteristic of MSMA use, several simultaneous processes can occur: (1) microbial methylation of MMA to dimethylarsinic acid (DMA), (2) microbial demethylation of MMA to inorganic arsenic (iAs), (3) methylation of iAs to MMA, and (4) sorption and sequestration of MMA and its metabolites to soil minerals. Sequestered residues are residues that cannot be desorbed from soil in environmental conditions. Sequestration is rapid in the initial several days after MSMA application and continues at a progressively slower rate over time. Once sequestered, MMA and its metabolites are inaccessible to soil microorganisms and cannot be transformed. The rate and extent of the sorption and sequestration as well as the mobility of MMA and its metabolites depend on the local edaphic conditions. In typical MSMA use areas, the variability of the edaphic conditions is constrained. The goal of this research was to estimate the amount of iAs potentially added to drinking water as a result of the use of MSMA, with models and scenarios developed by the US Environmental Protection Agency for pesticide risk assessment. In this project, the estimated drinking water concentrations (EDWCs) for iAs were assessed as the average concentration in the reservoir over a 30-year simulation with annual applications of MSMA at maximum label rates. When the total area of suitable land was assumed to be treated, EDWCs ranged from <0.001 to 0.12 µg/L. When high estimates of actually treated acreage are considered, the EDWCs are below 0.06 µg/L across all scenarios. Integr Environ Assess Manag 2024;20:2076-2087. © 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Environmental fate of monosodium methanearsonate (MSMA)-Part 1: Conceptual model.

Monosodium methanearsonate (MSMA), the sodium salt of monomethylarsonic acid (MMA), is used as a selective, broad-spectrum contact herbicide to control weeds in cotton and a variety of turf. In water, MSMA dissociates into ions of sodium (Na+) and of MMA-, which is the herbicide's active component. Certain soil microorganisms can methylate MMA to dimethylarsinic acid (DMA) other microorganisms can demethylate MMA to inorganic arsenic (iAs). To predict the groundwater concentration of iAs that may result from MSMA application, the processes affecting the environmental behavior of MSMA must be quantified and modeled. There is an extensive body of literature regarding the environmental behavior of MSMA. There is a consensus among scientists that the fate of MMA in soil is controlled by microbial activity and sorption to solid surfaces and that iAs sorption is even more extensive than that of MMA. The sorption and transformation of MMA and its metabolites are affected by several factors including aeration condition, temperature, pH, and the availability of nutrients. The precise nature and extent of each of these processes vary depending on site-specific conditions; however, such variability is constrained in typical MSMA use areas that are highly managed. Monomethylarsonic acid is strongly sorbed on mineral surfaces and becomes sequestered into the soil matrix. Over time, a greater portion of MMA and iAs becomes immobile and unavailable to soil microorganisms and to leaching. This review synthesizes the results of studies that are relevant for the behavior of MSMA used as a herbicide to reliably predict the fate of MSMA in its use conditions. Integr Environ Assess Manag 2024;20:1859-1875. © 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Effect of Biofouling on the Sorption of Organic Contaminants by Microplastics.

Microplastics in the aquatic environment are susceptible to colonization by surrounding microorganisms, which form biofilms over the microplastic's surface. These biofilm-laden microplastics can then interact with a diverse array of contaminants. In the present study, biofilms were grown on microplastics in a laboratory setting using Pseudomonas aeruginosa as a model biofilm-forming bacterium for periods of 5 to 15 days. The sorption of three organic compounds representing different levels of hydrophobicity, namely methylene blue (MB), phenanthrol, and phenanthrene, was used to evaluate the effect of biofilm biomass on the adsorption of organic contaminants to microplastics. The sorption of MB and phenanthrol was found to increase with biofouling time, indicating affinity between these contaminants and the biofilm biomass on the particle. However, the presence of a biofilm did not influence the sorption of phenanthrene on the microplastics. These results suggest that the hydrophobicity of organic contaminants plays a major role in how biofouling of microplastics will influence contaminant sorption by microplastics. For some contaminants, biofilm can enhance the role of microplastics as contaminant vectors. These findings emphasize the need to understand the biomass load on environmental microplastics and the contaminants that associate with it for an accurate representation of the risk associated with microplastics in the environment. Environ Toxicol Chem 2024;43:1973-1981. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Far from Their Origins: A Transcriptomic Investigation on How 2,4-Di-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl) Phenol Affects Rainbow Trout Alevins.

Benzotriazole ultraviolet stabilizers (BUVSs) are a group of widely used chemicals added to a variety of consumer (e.g., plastics) and industrial (e.g., metal coating) goods. Although detected globally as an environmentally persistent pollutant, BUVSs have received relatively little toxicological attention and only recently have been acknowledged to affect development and the endocrine system in vivo. In our previous study, altered behavior, indicative of potential neurotoxicity, was observed among rainbow trout alevins (day 14 posthatching) that were microinjected as embryos with a single environmentally relevant dose of 2,4-di-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl) phenol (UV-327). In the present follow-up study, we performed whole-transcriptome profiling (RNA sequencing) of newly hatched alevins from the same batch. The primary aim was to identify biomarkers related to behavior and neurology. Dose-specifically, 1 to 176 differentially expressed genes (DEGs) were identified. In the group presenting altered behavior (273.4 ng g-1), 176 DEGs were identified, yet only a fraction was related to neurological functions, including water, calcium, and potassium homeostasis; acetylcholine transmission and signaling; as well insulin and energy metabolism. The second objective was to estimate the transcriptomic point of departure (tPOD) and assess if point estimate(s) are protective of altered behavior. A tPOD was established at 35 to 94 ng UV-327 g-1 egg, making this tPOD protective of behavioral alterations. Holistically, these transcriptomic alterations provide a foundation for future research on how BUVSs can influence rainbow trout alevin development, while providing support to the hypothesis that UV-327 can influence neurogenesis and subsequent behavioral endpoints. The exact structural and functional changes caused by embryonic exposure to UV-327 remain enigmatic and will require extensive investigation before being deciphered and understood toxicologically. Environ Toxicol Chem 2024;43:2026-2038. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The Penetration of Environmental Awareness in Organic Chemistry Experiment Teaching

With the continuous development and progress of science and technology and society, the relationship between education and environmental protection is increasingly close, and people's attitude towards pollution is more and more serious, away from the formalism. We have the responsibility and obligation to implement this important measure of environmental awareness in chemistry teaching. Therefore, in this paper, the existing problems and pollution sources of organic chemistry experiments, the necessity and measures to achieve environmental chemistry are described.

N-glucuronidation and Excretion of Perfluoroalkyl Sulfonamides in Mice Following Ingestion of Aqueous Film-Forming Foam.

Perfluoroalkyl sulfonamides (FASAs) and other FASA-based per- and polyfluoroalkyl substances (PFASs) can transform into recalcitrant perfluoroalkyl sulfonates in vivo. We conducted high-resolution mass spectrometry suspect screening of urine and tissues (kidney and liver) from mice dosed with an electrochemically fluorinated aqueous film-forming foam (AFFF) to better understand the biological fate of AFFF-associated precursors. The B6C3F1 mice were dosed at five levels (0, 0.05, 0.5, 1, and 5 mg kg-1 day-1) based on perfluorooctane sulfonate and perfluorooctanoate content of the AFFF mixture. Dosing continued for 10 days followed by a 6-day depuration. Total oxidizable precursor assay of the AFFF suggested significant contributions from precursors with three to six perfluorinated carbons. We identified C4 to C6 FASAs and N-glucuronidated FASAs (FASA-N-glus) excreted in urine collected throughout dosing and depuration. Based on normalized relative abundance, FASA-N-glus accounted for up to 33% of the total excreted FASAs in mouse urine, highlighting the importance of phase II metabolic conjugation as a route of excretion. High-resolution mass spectrometry screening of liver and kidney tissue revealed accumulation of longer-chain (C7 and C8) FASAs not detected in urine. Chain-length-dependent conjugation of FASAs was also observed by incubating FASAs with mouse liver S9 fractions. Shorter-chain (C4) FASAs conjugated to a much greater extent over a 120-min incubation than longer-chain (C8) FASAs. Overall, this study highlights the significance of N-glucuronidation as an excretion mechanism for short-chain FASAs and suggests that monitoring urine for FASA-N-glus could contribute to a better understanding of PFAS exposure, as FASAs and their conjugates are often overlooked by traditional biomonitoring studies. Environ Toxicol Chem 2024;43:2274-2284. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.