Envelope Correlation Research Articles

Mutual Coupling Reduction in Compact MIMO Antenna Operating on 28 GHz by Using Novel Decoupling Structure.

This article presents an antenna with compact and simple geometry and a low profile. Roger RT6002, with a 10 mm × 10 mm dimension, is utilized to engineer this work, offering a wideband and high gain. The antenna structure contains a patch of circular-shaped stubs and a circular stub and slot. These insertions are performed to improve the impedance bandwidth of the antenna. The antenna is investigated, and the results are analyzed in the commercially accessible electromagnetic (EM) software tool High Frequency Structure Simulator (HFSS). Afterwards, a two-port multiple-input-multiple-output (MIMO) antenna is engineered by orthogonalizing the second element to the first element. The antenna offers good value for mutual coupling of less than -20 dB. The decoupling structure or parasitic patch is placed between two MIMO elements for more refined mutual coupling of the proposed MIMO antenna. The resultant antenna offers mutual coupling of less than -32 dB. Moreover, other MIMO parameters like envelop correlation coefficient (ECC), mean effective gain (MEG), diversity gain (DG), and channel capacity loss (CCL) are also studied to recommend antennas for future applications. The hardware model is fabricated and tested to validate the results, which resembles software-generated results. Moreover, the comparison of outcomes and other important parameters is performed using published work. The outcome of this proposed work is performed using already published work. The outcomes and comparison make the presented design the best option for future 5G devices.

Quad-port MIMO antenna with high isolation characteristics for sub 6-GHz 5G NR communication

A four-port MIMO antenna with high isolation is presented. The antenna is primarily envisioned to cover the n48 band of Frequency Range-1 (FR-1) with TDD duplex mode. The engineered antenna has electrical dimensions of 90 × 90 × 1.57 mm3. The size miniaturization of a single antenna unit is achieved through an optimized placement of slots and extended arms. The quad-antennas are then placed orthogonally to achieve antenna diversity. The antenna resonates at 3.56 GHz and 5.28 GHz having 2:1 VSWR fractional bandwidth of 1.82% and 2.12%. The proposed resonator provides 88.34% and 79.28% efficiency at lower and upper bands, respectively. The antenna is an exceptional radiator regarding MIMO diversity performance owing to high inter-element isolation. The values of envelope correlation coefficient < 0.05, channel capacity loss is nearly 0.1 bits/sec/Hz, and total active reflection coefficient is − 24.26. The full ground plane profile aids in high directivity and cross-pol isolation. The antenna exhibits a gain of 4.2 dBi and 2.8 dBi, respectively, justifying intended application requirements. There is a good coherence between simulation and experimental results. The self-decoupled antenna poses its application in 5G and WLAN Communication Applications.

CSRR loaded multiband THz MIMO antenna for nano-communications and bio-sensing applications

In this paper, a multiband THz Multi-Input Multi-Output (MIMO) antenna is designed with dimensions of 80×100×10.8μm³. The antenna is made-up on a gold-plated Arlon AD410 substrate with a relative permittivity of 4.1.It operates at three resonant frequencies, namely 1.45THz, 2.25THz, and 3.25THz, achieved through the integration of Complementary Split-Ring Resonator (CSRR) and Substrate Integrated Waveguide (SIW) technologies. The two-element MIMO configuration of the antenna ensures exceptional performance, offering high throughput with data rates of 25.23Gbps for the Quadrature Phase Shift Keying (QPSK) scheme and 56.68Gbps for the 16-Quadrature Amplitude Modulation (QAM) scheme. It also exhibits remarkable channel capacity, approximately 8.2bps/Hz at Signal-to-Noise Ratio (SNR) = 20dB, surpassing the capabilities of single-element antennas. Moreover, it demonstrates excellent diversity performance for judging the MIMO antenna performance. This is evident through the following key metrics: Envelope Correlation Coefficient (ECC) < 0.02, indicating that less than 1 % of power is transferred from the excited antenna to the second 50Ω terminated antenna when antenna-1 is excited; Directive Gain (DG) >9.95dB; Total Active Reflection Coefficient (TARC) < -10dB, ensuring that a minimum of 90 % of the power is delivered to the patch port; and Channel Capacity Loss (CCL) < 0.35 bits/sec/Hz, guaranteeing reliable wireless communication. The antenna boasts peak gains of 3.83dBi, 4.06dBi, and 6.82dBi at 1.45THz, 2.25THz, and 3.25THz, respectively, along with a radiation efficiency of approximately 37, 58, and 51 % at the corresponding frequencies. Notably, the first two bands (1.34-1.51THz and 2.20-2.28THz) exhibit narrow bandwidths with quality factors above 80, making them particularly suitable for sensing applications in biomedical. Band-1 offers an average sensitivity of 3222.22 GHz/RIU and an FOM of 17.89, while Band-2 provides an average sensitivity of 2578.68 GHz/RIU and an FOM of 14.38. These characteristics make it well-suited for near-field Nano-communications and sensing applications.

A Novel Densely Packed 4 × 4 MIMO Antenna Design for UWB Wireless Applications.

In this article, a compact 4-port UWB (Ultra-Wide Band) MIMO (Multiple Input Multiple Output) antenna is proposed. A low profile FR-4 substrate is used as a dielectric material with the dimensions of 58 × 58 mm2 (0.52λ × 0.52λ) at 2.8 GHz and a standard thickness of 1.6 mm. The proposed design characterizes an impedance bandwidth starting from 2.8 to 12.1 GHz (124.1%). Each of the four elements of the proposed MIMO antenna configuration consists of a monopole antenna with PG (partial ground) that has a slot at its center. The corner of each patch (radiator) and ground slot are rounded for impedance matching. Each unit cell is in an orthogonal orientation, forming a quad-port MIMO antenna system. For reference, the partial ground of each unit cell is connected meticulously with the others. The simulated results of the proposed quad-port MIMO antenna design were configured and validated by fabrication and testing. The proposed Quad-port MIMO design has a 6.57 dBi peak gain and 97% radiation efficiency. The proposed design has good isolation below 15 dB in the lower frequency range and below 20 dB in the higher frequency range. The design has a measured ECC (Envelop Correlation Co-efficient) of 0.03 and DG (Diversity Gain) of 10 dB. The value of TARC (Total Active Reflection Coefficient) over the entire operating band is less than 10 dB. Moreover, the design maintained CCL (Channel Capacity Loss) < 0.4 bits/sec/Hz and MEG (Mean Effective Gain) < 3 dB. Based on the obtained results, the proposed design is suitable for the intended high data rate UWB wireless communication portable devices.

Design and Fabrication of a 2-Port Multiple Antenna System for mmWave Application

The next-generation wireless communication technology heading towards the mmWave band requires multiple antenna systems to achieve high diversity, high data rates, and reliability. The design of multiple antenna systems is always associated with the problem of mutual coupling between antenna elements. In order to achieve better system performance, the mutual coupling between the elements has to be minimized. This work basically aims to minimize the mutual interaction among the antenna elements. A 2-port multiple antenna system is presented, with the defected ground structure as a decoupling technique, in order to minimize the mutual coupling. The single microstrip patch antenna is initially designed to operate at 24 GHz; later, it is transformed into a 2-port multiple antenna system. The transformed 2-port multiple antenna is loaded with the defective ground structure. The designed antenna system is fabricated, and practical measurements are carried out. The isolation achieved with defective ground structure through simulation is −27dB, and the practical measured value is −40dB. The 2-port multiple antenna system performance is assessed through the following metrics: Envelope Correlation Coefficient(ECC), Diversity Gain(DG), and Channel Capacity Loss(CCL). For the proposed 2-port multiple antenna the obtained values of ECC, DG and CLL are 0.004, 9.99dB and 0.4 bit/s/Hz. The results of the simulated structure are in good agreement with the fabricated structure. The result shows that defective ground is the better technique to achieve isolation between the closely placed antennas. The defective ground structure is the simplest technique in comparison with other techniques, such as metamaterial, energy band gap etc. The major novelty of the work includes, the design of a 2-port multiple antenna system with single slot and achieving the isolation more than −47dB without affecting the antenna resonating frequency.

High Isolation Wideband MIMO Antenna without Decoupling Technique for IoT Applications

This paper presents a method a high isolation wideband MIMO antenna without using any decoupling technique. This is achieved by transforming a strip line to a 1 ×2 MIMO antenna using Hilbert transform and Defected Ground structure is used in the antenna to resonate the antenna in for IOT and 5G sub-6 GHz bands. The proposed antenna has a size of 50 × 49.8 × 1.6 mm 3 and operates in the frequency band of 4.6 GHz to 5.94 GHz. The antenna simulated in ANSYS HFSS showed that its parameters Envelope correlation coefficient (ECC), Total Active Reflection Coefficient (TARC), Diversity gain (DG) and Channel Capacity Loss (CCL) are less than 0.04, -25 dB, 9.98 to 10 dB and less than 0.4 bits/s/Hz respectively. The radiation pattern of the antenna in both E-plane and H-plane has been simulated which the uniform distribution of power in the space.

Compact dual-port MIMO filtenna-based DMS with high isolation for C-band and X-band applications

A dual-port multiple-input multiple-output (MIMO) filtenna with minimal sizes of 80 × 45 mm2 is set up in this study. Each element in this MIMO filtenna is positioned orthogonally to the one next to it to improve isolation. For the MIMO element to achieve high-frequency selectivity and compact size, a frequency-reconfigurable filtenna that was created by fusing a band-pass filter and a monopole radiator was used. The suggested filtenna can switch between its C-band and X-band operating states with ease. On build the filtenna circuit, a band-pass filter based on defective microstrip structure is inserted to a circular monopole radiator. The developed filtenna operates in the C-band frequency range of 6.5–8 GHz and the X-band frequency range of 8–12 GHz. It is possible to use the X-band operating state for communication in a cognitive radio environment. Used as a decoupling structure, metamaterial structures can increase isolation to more than 40 dB across the bandwidth. The suggested MIMO filtenna system has an envelope correlation coefficient of 2.4e−6, a peak gain of 6 dBi, and an impedance bandwidth of 7.4–7.75 GHz. The MIMO filtenna is constructed and measured, and the findings of the measurement and simulation are in good agreement.

Analyzing the Performance of Millimeter Wave MIMO Antenna under Different Orientation of Unit Element.

In this paper, a compact and simplified geometry monopole antenna with high gain and wideband is introduced. The presented antenna incorporates a microstrip feedline and a circular patch with two circular rings of stubs, which are inserted into the reference circular patch antenna to enhance the bandwidth and return loss. Roger RT/Duroid 6002 is used as the material for the antenna, and has overall dimensions of WS × LS = 12 mm × 9 mm. Three designs of two-port MIMO configurations are derived from the reference unit element antenna. In the first design, the antenna element is placed parallel to the reference antenna, while in the second design, the element is placed orthogonal to the reference element of the antenna. In the third design, the antenna elements are adjusted to be opposite each other. In this study, we analyze the isolation between the MIMO elements with different arrangements of the elements. The MIMO configurations have dimensions of 15 mm × 26 mm for two of the cases and 15 mm × 28.75 mm for the third case. All three MIMO antennas are made using similar materials and have the same specifications as the single element antenna. Other significant MIMO parameters, including the envelope correlation coefficient (ECC), diversity gain (DG), channel capacity loss (CCL), and mean effective gain (MEG), are also researched. Additionally, the paper includes a table summarizing the assessment of this work in comparison to relevant literature. The results of this study indicate that the proposed antenna is well-suited for future millimeter wave applications operating at 28 GHz.

Design and performance analysis of 8‐port multi‐service quad‐band MIMO antenna for automotive communication

AbstractIn this paper, a low profile compact 8‐port multiband antenna with polarization diversity principle for automotive communication is proposed. The geometric of the proposed MIMO antenna is integrated with multiple stubs on substrate having a size of 0.94λg × 0.94λg. The proposed design resonates at multiple frequencies of 1.8, 2.4, 5.2, and 5.8 GHz, respectively for GSM, ISM bands and WLAN wireless services which covers the bandwidth of 2.8%, 5%, 5%, and 5.6%, respectively with S11 ≤ −10 dB. Besides, the measured results provide a peak gain of 4.3, 3.1, 4.5, and 4.2 dBi at 1.8, 2.4, 5.2, and 5.8 GHz, omni directional radiation pattern with more than 80% of efficiency in all operating bands. The MIMO structure provides a good isolation of greater than 20 dB without decoupling structure, envelope correlation coefficient of ≤0.1, diversity gain of ≥9.99 dB, mean effective gain of &lt;1 dB, total active reflection coefficient ≤−10 dB, channel capacity loss of ≤0.25 bits/s/Hz. Finally, the housing effect of MIMO antenna is analyzed in the vehicular environment which provides good performance for Vehicular to Intravehicular communication.

Longitudinal resting-state EEG in amyloid-positive patients along the Alzheimer’s disease continuum: considerations for clinical trials

BackgroundTo enable successful inclusion of electroencephalography (EEG) outcome measures in Alzheimer’s disease (AD) clinical trials, we retrospectively mapped the progression of resting-state EEG measures over time in amyloid-positive patients with mild cognitive impairment (MCI) or dementia due to AD.MethodsResting-state 21-channel EEG was recorded in 148 amyloid-positive AD patients (MCI, n = 88; dementia due to AD, n = 60). Two or more EEG recordings were available for all subjects. We computed whole-brain and regional relative power (i.e., theta (4-8 Hz), alpha1 (8-10 Hz), alpha2 (10-13 Hz), beta (13-30 Hz)), peak frequency, signal variability (i.e., theta permutation entropy), and functional connectivity values (i.e., alpha and beta corrected amplitude envelope correlation, theta phase lag index, weighted symbolic mutual information, inverted joint permutation entropy). Whole-group linear mixed effects models were used to model the development of EEG measures over time. Group-wise analysis was performed to investigate potential differences in change trajectories between the MCI and dementia subgroups. Finally, we estimated the minimum sample size required to detect different treatment effects (i.e., 50% less deterioration, stabilization, or 50% improvement) on the development of EEG measures over time, in hypothetical clinical trials of 1- or 2-year duration.ResultsWhole-group analysis revealed significant regional and global oscillatory slowing over time (i.e., increased relative theta power, decreased beta power), with strongest effects for temporal and parieto-occipital regions. Disease severity at baseline influenced the EEG measures’ rates of change, with fastest deterioration reported in MCI patients. Only AD dementia patients displayed a significant decrease of the parieto-occipital peak frequency and theta signal variability over time. We estimate that 2-year trials, focusing on amyloid-positive MCI patients, require 36 subjects per arm (2 arms, 1:1 randomization, 80% power) to detect a stabilizing treatment effect on temporal relative theta power.ConclusionsResting-state EEG measures could facilitate early detection of treatment effects on neuronal function in AD patients. Their sensitivity depends on the region-of-interest and disease severity of the study population. Conventional spectral measures, particularly recorded from temporal regions, present sensitive AD treatment monitoring markers.

A Four Element Stringray-Shaped MIMO Antenna System for UWB Applications.

This paper presents a CoPlanar-Waveguide (CPW)-fed stingray-shaped Ultra-WideBand (UWB) Multiple-Input-Multiple-Output (MIMO) antenna system designed for microwave imaging applications. Featuring a diagonal square with four inner lines and a vertical line at the center from toe to tip with a CPW feed line, the unit antenna element looks like a stingray fish skeleton and is, therefore, named as a stingray-shaped antenna. It offers a bandwidth spanning from 3.8 to 12.7 GHz. Fabricated on a 31mil RO5880 RF teflon substrate with a relative permittivity of 2.2, the proposed antenna has dimensions of 26 × 29 × 0.787 mm3. The maximum realized gain achieved is 3.5 dBi with stable omnidirectional radiation patterns. The antenna element is used in a four-antenna MIMO configuration with an isolation-improving structure at the center. The MIMO system has dimensions of 58 × 58 × 0.787 mm3 with a maximum realized gain of 5.3 dBi. The antenna's performance in terms of MIMO parameters like Envelope Correlation Coefficient (ECC) and Diversity Gain (DG) is within satisfactory limits for medical imaging applications. Time domain analysis also yields positive results, allowing its integration into a breast phantom tumor detection simulation. The simulation and measurement results demonstrate excellent agreement, making this antenna a promising candidate for microwave imaging and biomedical applications.

Dual-Band (28/38 GHz) Compact MIMO Antenna System for Millimeter-Wave Applications

The present work proposes a novel design of a dual-band-printed antenna for operation at the millimeter-wave frequencies 28 and 38 GHz that are utilized for the modern and future generations of mobile communications. The antenna is composed of two radiating elements. The first element is the main patch that is fed through a microstrip line with inset feed, and the second element is a parasitic element that is fed through capacitive coupling with the main patch. The design parameters of the proposed antenna are optimized through a complete parametric study to give excellent impedance matching at 28 GHz over the band 27.7–28.3 GHz and at 38 GHz over the band 37.7–38.3 GHz. The surface current distributions at the two operational frequencies are investigated. The designed antenna is used to construct a four-port efficient multi–input–multi–output (MIMO) system. The MIMO system performance is investigated regarding the envelope correlation coefficient (ECC), diversity gain (DG), and the channel capacity loss (CCL) showing very good performance. The single-element antenna and the MIMO are fabricated and experimentally evaluated showing excellent impedance matching over the lower and higher frequency bands, which come in agreement with the simulation results. It is shown that the antenna produces maximum gain of 7.4 and 8.1 dBi at 28 and 38 GHz, respectively. The average radiation efficiencies of the proposed antenna are 88% and 88.8% over the lower and higher frequency bands, respectively. In addition, the coupling coefficients between the MIMO antenna systems are measured experimentally showing very low coupling values resulting in an efficient MIMO system that is suitable for future millimeter-wave (mm-wave) applications.

Neural correlation of speech envelope tracking for background noise in normal hearing.

Everyday speech communication often occurs in environments with background noise, and the impact of noise on speech recognition can vary depending on factors such as noise type, noise intensity, and the listener's hearing ability. However, the extent to which neural mechanisms in speech understanding are influenced by different types and levels of noise remains unknown. This study aims to investigate whether individuals exhibit distinct neural responses and attention strategies depending on noise conditions. We recorded electroencephalography (EEG) data from 20 participants with normal hearing (13 males) and evaluated both neural tracking of speech envelopes and behavioral performance in speech understanding in the presence of varying types of background noise. Participants engaged in an EEG experiment consisting of two separate sessions. The first session involved listening to a 12-min story presented binaurally without any background noise. In the second session, speech understanding scores were measured using matrix sentences presented under speech-shaped noise (SSN) and Story noise background noise conditions at noise levels corresponding to sentence recognitions score (SRS). We observed differences in neural envelope correlation depending on noise type but not on its level. Interestingly, the impact of noise type on the variation in envelope tracking was more significant among participants with higher speech perception scores, while those with lower scores exhibited similarities in envelope correlation regardless of the noise condition. The findings suggest that even individuals with normal hearing could adopt different strategies to understand speech in challenging listening environments, depending on the type of noise.

Design of High-Gain and Low-Mutual-Coupling Multiple-Input–Multiple-Output Antennas Based on PRS for 28 GHz Applications

In this paper, a high-gain and low-mutual-coupling four-port Multiple Input Multiple Output (MIMO) antenna based on a Partially Reflective Surface (PRS) for 28 GHz applications is proposed. The antenna radiator is a circular-shaped patch with a circular slot and a pair of vias to secure a wide bandwidth ranging from 24.29 GHz to 28.45 GHz (15.77%). The targeted band has been allocated for several countries such as Korea, Europe, the United States, China, and Japan. The optimized antenna offers a peak gain of 8.77 dBi at 24.29 GHz with a gain of 6.78 dBi. A novel PRS is designed and loaded on the antenna for broadband and high-gain characteristics. With the PRS, the antenna offers a wide bandwidth from 23.67 GHz to 29 GHz (21%), and the gain is improved up to 11.4 dBi, showing an overall increase of about 3 dBi. A 2 × 2 MIMO system is designed using the single-element antenna, which offers a bandwidth of 23.5 to 29 GHz (20%), and a maximum gain of 11.4 dBi. The MIMO antenna also exhibits a low mutual coupling of −35 dB along with a low Envelope Correlation Coefficient and Channel Capacity Loss, making it a suitable candidate for future compact-sized mmWave MIMO systems.

Quad-Element MIMO Antenna System Using Half-Cut Miniaturized UWB Antenna for IoT-Based Smart Home Digital Entertainment Network

This work presents a miniaturized quad-element multi-input multi-output (MIMO) antenna with low mutual coupling, inherent isolation, and easy upgradability for an Internet of Things (IoT) based high-speed smart digital entertainment network using ultra-wideband (UWB) technology. Ultra Wideband (UWB) technology is anticipated to play a significant role in the future IoT based smart systems due to its ability to provide high precision location information, low power consumption, high data rates and secure communication. An elliptical quadrant-shaped radiator with a C-shaped protuberant ground plane is conceptualized as a quasi-monopole UWB antenna following the half-cut miniaturization approach with very compact dimensions of 18W11 mm2. The elliptical quadrant radiator in combination with C-shaped ground plane introduces multi-resonance characteristic in addition to providing better impedance matching with miniaturization and inherent high isolation for MIMO configuration. The single element antenna is then organized in an orthogonal arrangement with an edge-to-edge distance of 5 mm to develop a quad-element MIMO antenna system. The MIMO antenna structure realizes a wide bandwidth of 3.14-11.23 GHz (center frequency at 7.19 GHz), peak gain of 7.2 dBi, and radiation efficiency of above 60% with good isolation (>-20 dB) between the adjacent elements without employing any dedicated decoupling structure. The diversity performances of the proposed MIMO antenna are relatively good, with a very low envelope correlation coefficient (ECC) of less than 0.35 and diversity gain (DG) nearly at 10. Further, the total active reflection coefficient (TARC) <-10 dB and channel capacity loss (CCL) <0.4 bit/s/Hz, parameters are witnessed to be within acceptable limits. The simulated and measured results agree well, testifying that the proposed four-element MIMO antenna is suitable for UWB applications.

Wideband 4-port MIMO antenna array using fractal and complimentary split-ring structure for Ku-band appliances

This article presents the wideband compact 4-port fractal MIMO antenna array for Ku-band applications. It incorporates the Koch snowflake fractal in combination with a complementary split-ring resonator (CSRR) to achieve both miniaturization and a broad bandwidth. Further, to improve the effectiveness of the single-driven element, the 2-element linear array is constructed, fabricated, and tested. The single-driven element and the constructed array give good performance results. For pattern diversity, a 4-port MIMO configuration is developed and tested. The proposed MIMO array geometry realizes a wide bandwidth of 13.6−17.5 GHz, fractional bandwidth of 25.08%, a maximum gain of 6.95 dBi, and radiation efficiency of beyond 90% with superior isolation (>−30 dB). It provides better diversity performance parameters (Envelope correlation coefficient <0.001) over the resonating band. Also, channel capacity loss (CCL) <0.11 bit/s/Hz and the total active reflection coefficient (TARC) <−10 dB, parameters are perceived to be within adequate range. Therefore, the designed compact fractal antenna, 2-element array, and 4-port MIMO array are applicable for wide Ku-band applications.

Miniaturized and high gain circularly slotted 4×4 MIMO antenna with diversity performance analysis for 5G/Wi-Fi/WLAN wireless communication applications

A miniaturized with a high gain four port Multiple-Input Multiple-Output (MIMO) is presented in the manuscript. The presented design contains four radiating patch elements with a Defected Ground Structure (DGS). The shape of the radiating element is identified after the analysis of three stages. The design optimization is performed by changing the diameter of the circle loaded in the patch region and changing the length of the ground layer. The design is investigated for L, S, C, and X frequency band regions. The structure is designed using flame-retardant glass-reinforced epoxy laminate material (FR4) substrate material. The physical size of the four-port structure is 78x50 mm2. Three resonating frequency bands are observed at 2.02 GHz, 5.87 GHz and 11.19 GHz. The structure provides minimum return loss of −10.27 dB, −18.51 dB and −18.59 dB. The proposed design achieves a peak bandwidth of 3.94 GHz, and a maximum gain of 10.03 dBi, Various diversity parameters, including Total active reflection coefficient (TARC), Envelope Correlation Coefficient (ECC), mean effective gain (MEG), Diversity Gain (DG), and channel capacity loss (CCL), have been thoroughly analyzed. The measured and simulated outcomes are compared and analyzed. All performance indicators meet the allowed limits, demonstrating the suitability of the design for 5G, Wi-Fi and WLAN wireless communication applications.

Two closely spaced microstrip patches with high isolation for full-duplex/MIMO applications.

This paper shows an effective method to significantly enhance the isolation of a closely spaced two-port patch antenna, which can be deployed for full-duplex transceivers as well as multiple-input-multiple-output (MIMO) systems. Two rectangular microstrip patches are arranged in the E-plane configuration. To achieve high isolation, a grounded stub is positioned between the radiating patches. For validation of the proposed concept, an antenna prototype is fabricated for measurements. The measured data demonstrates that the port-to-port mutual coupling can be suppressed to -50 dB, which is useful in self-interference cancellation for full-duplex communication systems. Compared with the coupled design, the isolation is significantly enhanced by 43 dB with an inter-element spacing of 0.034λc, where λc is a free-space wavelength at the center operating frequency. Regarding MIMO metrics, the antenna also shows good MIMO diversity performance based on an envelope correlation coefficient and a diversity gain.

Test-retest reliability of the human connectome: An OPM-MEG study

Abstract Magnetoencephalography with optically pumped magnetometers (OPM-MEG) offers a new way to record electrophysiological brain function, with significant advantages over conventional MEG, including adaptability to head shape/size, free movement during scanning, increased signal amplitude, and no reliance on cryogenics. However, OPM-MEG remains in its infancy, with significant questions to be answered regarding the optimal system design. Here, we present an open-source dataset acquired using a newly constructed OPM-MEG system with a triaxial sensor design, 168 channels, OPM-optimised magnetic shielding, and active background field control. We measure the test-retest reliability of the human connectome, which was computed using amplitude envelope correlation to measure whole-brain (parcellated) functional connectivity, in 10 individuals while they watch a 600 s move clip. Our results show high repeatability between experimental runs at the group level, with a correlation coefficient of 0.81 in the θ, 0.93 in α, and 0.94 in β frequency ranges. At the individual subject level, we found marked differences between individuals, but high within-subject robustness (correlations of 0.56 ± 0.25, 0.72 ± 0.15, and 0.78 ± 0.13 in α, θ, and β respectively). These results compare well to previous findings using conventional MEG and show that OPM-MEG is a viable way to robustly characterise connectivity.

A dual operating (27/38 GHz) high performance 2 × 4 MIMO antenna array for 5G new radio applications

This article presents an unique configuration of Multiple-Input Multiple-Output (MIMO) antenna array for functioning at 27/38 GHz millimeter-wave 5G new radio (NR) frequency bands applications. The suggested antenna is constructed with four MIMO elements, containing total of eight identical patches arranged in a 2 × 4 array configuration. The array also includes a separate non-connected rectangular ground plane with an overall dimension of 32.4 × 32.8 × 0.8 mm3. The single radiating patch elements are designed using spline resonator with H-shaped structures. The prototype model is realized using low cost FR-4 substrate and the obtained measurement results validate the analyzed simulated results. The suggested MIMO array antenna offers dual band operation with an impedance bandwidth of 8400 MHz covering 22 to 30.4 GHz and 8500 MHz ranging from 36.1 to 44.6 GHz. The proposed antenna achieves a peak gain of 8.75 dBi when operating at 27 GHz and 18.59 dBi at 38.1 GHz. Furthermore, it shows circular polarization characteristics by offering the axial ratio values significantly lower than 3 dB at 27 GHz and 38.1 GHz frequency bands. Additionally, the results indicate the favourable values of the diversity performance parameters with reference to Mean effective gain (MEG), Envelope correlation coefficient (ECC), Diversity gain (DG), Total active reflection coefficient (TARC), and Channel capacity loss (CCL). Moreover, it demonstrates high isolation (<−20 dB) within the desired bandwidth. These superior characteristics make it compatible for 5G NR frequency bands N257(26.5-29.5 GHz), N258 (24.5-27.5 GHz), N259 (39.5-43.5 GHz) and N260 (37-40 GHz), enabling its use in various countries including the China, European Union, Sweden, Korea, Japan, United States of America, Canada and Australia.