Enhancement Of Fluorescence Intensity Research Articles

Nitroquinolone Fused Salicyl and Naphthyl Hydrazone Fluorescent Probes for the Detection of Fe3+and Pb2+ Ions.

The application of quinolones stretches over a large umbrella of medicinal field as well as chemosensor due to the presence of privileged heterocyclic aromatic rig system. Salicyl and Naphthyl Hydrazide motifs are also established fluorophore groups. Therefore in this work, we have designed and synthesized Salicyl hydrazide (3a-c) and naphthyl hydrazide fused nitroquinolones (5a-c) investigated for their fluorescent behaviour. Preliminary UV- absorption studies were carried out and the metal selectivity were examined with various metal ion. Among them, it was found that compound 3a was selective towards Fe3+ ions (λex = 330nm, 1:1 DMF:H2O at pH = 7.4 in HEPES Buffer medium). 3a shows decrease emission intensity in presence of Fe3+ ions. Compound 5a shows enhancement in fluorescence intensity upon addition of Pb2+ ion (λex = 280nm, 1:1 DMF:H2O at pH = 7.4 in HEPES Buffer medium). Further, the concentration dependence, competitive binding and EDTA reversibility were studied for selected compounds towards the respective cations selectivity. Jobs plot analysis indicate that 1:1 binding of 3a with Fe3+ ion (Ka = 3.17 x104M-1 and Limit Of Detection (LOD) = 5.1 × 10-7 M) whereas 5a showed 1:2 binding mode with Pb2+ ions (Ka = 2.14 × 106M-1 and Limit Of Detection (LOD) = 2.613 × 10-9M). Density Function Theoretical studies were performed as support for the experimental results.

Water-soluble polymeric probe with tryptophan pendants for formaldehyde sensing

Formaldehyde (FA) is a grade-I carcinogen and the most reactive aldehyde in the carbonyl family, posing substantial health hazards. Herein, a water-soluble polymeric probe with side-chain tryptophan pendants is proposed that relies on an FA-induced Pictet-Spengler reaction for FA sensing in an aqueous medium. The polymeric probe shows cyan fluorescence in an aqueous medium after the interaction with FA due to the formation of a β-carboline derivative, confirmed by high-resolution mass spectrum analysis of the product from the model reaction between tryptophan methyl ester and FA. The copolymer’s sensitivity to FA in aqueous solutions at the nanomolar level is estimated using the fluorescence titration method, where ∼20-fold enhancement in fluorescence intensity is observed within 2 min when 200 µM FA is added to the aqueous solution of the copolymer. The probe can selectively detect FA using colorimetric and fluorometric methods with a detection limit as low as 25 nM. The FA-sensing mechanism is studied from the model reaction of tryptophan methyl ester (TME) with FA, and density functional theory (DFT).

Supramolecular Interaction of Atenolol and Propranolol with β-Cyclodextrin Spectroscopic Characterization and Analytical Application.

Atenolol (ATE) and propranolol (PRO) inclusion complexes with β-cyclodextrin have been investigated in aqueous solution. The aqueous solution was examined and characterized using UV-vis, fluorescence spectroscopy, and 1H NMR. The physical mixture was characterized using FTIR. The existence of inclusion complexes is confirmed by observing changes in spectroscopic properties. The ATE complex with β-CD exhibited an interaction as host and (β-CD) as a guest in a 1:1 ratio, with an inclusion constant K of 2.09 × 10-3 µM-1, as determined by the typical double-reciprocal graphs. Similarly, the PRO complex with β-CD exhibited an interaction as host and (β-CD) guest in 1:1 and 1:2 stoichiometry at the same time; the inclusion constants were K1 = 5.80 × 10-5 µM-1 and K2 = 4.67 × 10-8 µM-1, as determined by typical double-reciprocal graphs. The variables influencing the formation of the inclusion complexes were investigated and optimized. Based on the enhancement in fluorescence intensity due to the formation of inclusion complexes, spectrofluorometric methods were developed and validated for determination of each drug's pharmaceutical formulation. The quantification of the fluorescence intensity for ATE and PRO was conducted at λex/λem 226/302 nm and λex/λem 231/338 nm, respectively. Under the optimal reaction circumstances, linear relationships with good correlation coefficients of 0.9918 and 0.99 were found in the concentration ranges of 0.3-1.7 μM, and 0.1-1.1 μM for ATE and PRO, respectively. The limits of detection (LODs) were found to be 0.13 and 0.01 μM for ATE and PRO, respectively. The suggested approach was effectively applied to the analysis of both drugs' pharmaceutical formulations.

Large-area enhancement of far-field directional fluorescence emission using hybrid photonic crystal grating structure optimized by genetic algorithm

Dielectric nanostructures have been widely used to enhance fluorescence intensity, but achieving large-area enhancement of far-field directional fluorescence emission remains a challenge. In this paper, a hybrid structure consisting of a photonic crystal cavity and a grating was designed with the aid of a genetic algorithm to achieve directional and high-ratio emission of near-infrared fluorescence. The resonant wavelength of the photonic crystal cavity was designed to match the excitation and emission wavelengths of fluorescence, while the emission distribution was controlled through the grating to achieve directional emission. The hybrid structure showed remarkable tolerance to the position of fluorescence emitters within the cavity. The emission angle of randomly distributed fluorescence emitters within the cavity was confined in a narrow range of 10°, while average enhancement of fluorescence achieved 120.36 times and the value of fluorescence ratio increases 14.13 times. The hybrid structures represented a viable approach to improve near-infrared ratiometric fluorescence sensing.

Revealing tumor cells and tissues with high selectivity through folic acid-targeted nanofluorescence probes responsive to acidic microenvironments.

Tumor-specific fluorescent probes must fulfill the dual requirements of targeted accumulation within tumors and high-resolution imaging capabilities. To achieve both tumor-targeted accumulation and high-resolution imaging performance, we developed a composite comprising an acid-responsive bodipy conjugated to amphiphilic PEG-b-PLA polymer, along with folic acid (FA)-modified PEG-b-PLA as a targeting moiety for active tumor-specific accumulation. Finally, a novel assembly of hybrid fluorescent nanoparticles was successfully synthesized by integrating these two components, demonstrating exceptional responsiveness to acidic conditions for fluorescence excitation and remarkable tumor-targeted accumulation capabilities. We conducted comprehensive in vitro and in vivo investigations employing techniques such as analysis of physicochemical properties, fluorescence-based probes detection at varying pH levels, assessment of in vitro cytotoxicity, evaluation of cellular uptake capacity, analysis of lysosomal co-localization imaging, examination of tumor fluorescence images in vivo, and investigation of biological distribution patterns. The results demonstrated that the acid-responsive nanofluorescence probe we designed and synthesized possesses desirable physical and chemical characteristics, including a small particle size and low cytotoxicity. Moreover, it exhibits rapid real-time response to acidic environments and displays enhanced fluorescence intensity, enabling the real-time tracking of probe entry into tumor cells as well as intracellular lysozyme accumulation. We achieved highly specific in vivo tumor visualization by combining nanoprobes targeting folate receptor. Through imaging cervical tumor mice, we demonstrated the precise imaging performance and high targeted accumulation of FA-targeted nanofluorescence probes in tumor tissue. Furthermore, we confirmed the in vivo safety of the FA-targeted nanofluorescence probe through biological distribution analysis. These findings highlight the potential widespread application of FA-targeted acid-responsive nanofluorescence probes for selective imaging of tumor cells and tissues.

Synthesis and Characterization of Multiple Stimuli-Responsive Fluorescent Polymer Hydrogels Based on Terpyridine and N-Isopropylacrylamide.

A series of stimuli-responsive fluorescent hydrogels were successfully synthesized via micelle radical copolymerization of hydrophilic acrylamide (AM), hydrophobic chromophore terpyridine-based monomer (TPY), and N-isopropylacrylamide (NIPAM). These hydrogels presented blue emissions (423-440 nm) under room temperature, which is caused by the π-π* transition of the conjugated structures. Once the ambient temperature was increased to 55 °C, the fluorescence color changed from blue (430 nm) to pink (575 nm) within 10 min, subsequently to yellow (535 nm), and eventually back to pink. The thermal-responsive properties are attributed to the transition of the TPY units from unimer to dimer aggregation via the intermolecular charge transfer complex at high temperatures. The hydrogels showed pH-responsive properties. The emission peak of the hydrogel exhibited a blue shift of ~54 nm from neuter conditions to acidic conditions, while a 6 nm red shift to an alkaline environment was observed. The hydrogels demonstrated an obvious change in fluorescence intensity and wavelength upon adding different metal ions, which is caused by the coordination between the terpyridine units incorporated on the backbones and the metal ions. As a consequence, the hydrogels presented a sharp quenching fluorescence interaction with Fe2+, Fe3+, Cu2+, Hg2+, Ni2+, and Co2+, while it exhibited an enhanced fluorescence intensity interaction with Sn2+, Cd2+, and Zn2+. The microstructural, mechanical, and rheological properties of these luminescent hydrogels have been systematically investigated.

Reinforcing Carrier‐Free Photothermal Nanodrugs Through Flavonol‐Driven Assembly

AbstractCarrier‐free nanodrugs that integrate chemodrugs and other therapeutic agents demonstrate good efficacy and minimized side effects, showing promise for combined therapy. However, a key challenge lies in enhancing the bioavailability and therapeutic potential of the nanodrugs through a controllable assembly process. Herein, a carrier‐free photothermal nanodrug (ZPQ NPs) is constructed through flavonol‐driven assembly with amine‐substituted perylene diimide for enhanced chemo‐photothermal combined cancer therapy. The flavonol, particularly quercetin, facilitates J‐aggregation of perylene diimide derivatives within the nanodrug and contributes to multiple improvements, including red‐shifted absorption, enhanced fluorescence intensity, improved photothermal conversion efficiency as well as excellent photostability. Moreover, the nanodrug also demonstrates enhanced cellular uptake and intracellular reactive oxygen species scavenging capability. The combination of quercetin and photothermal effect effectively kills cancer cells, as well as alleviates inflammation following photothermal therapy. Guided by in vivo fluorescence imaging, the application of ZPQ NPs results in complete tumor elimination and effectively inhibits tumor recurrence through chemo‐photothermal combined therapy. This work presents a straightforward strategy for constructing carrier‐free nanodrugs that exhibit simultaneous enhancements in both photophysical properties and biological activity.

Thiourea Functionalised Receptor for Selective Detection of Mercury Ions and its Application in Serum Sample.

A thiourea functionalised fluorescent probe 1-phenyl-3-(pyridin-4-yl)thiourea was synthesized and utilised as a fluorescent turn-on chemosensor for the selective recognition of Hg2+ ion over competitive metal ions including Na+, Mn2+, Li+, Cr2+, Ni2+, Ca2+, Cd2+, Mg2+, K+, Co2+, Cu2+, Zn2+, Al3+ and Fe2+ ions based on the inter-molecular charge transfer (ICT). Intriguingly, the receptor demonstrated unique sensing capabilities for Hg2+ in DMSO: H2O (10:90, v/v). The addition of Hg2+ ions to the sensor resulted in a blue shift in the absorption intensity and also enhancement in fluorescence intensity at 435nm. Fluorescence emission intensity increased linearly with Hg2+ concentration ranging from 0 to 80 µL. The detection limit and binding constant were determined as 0.134 × 10-6M and 1.733 × 107M-1, respectively. The sensing behavior of Hg2+ was further examined using DLS, SEM and FTIR. The probe could detect Hg2+ ions across a wide pH range. Furthermore, the receptor L demonstrated good sensing performance for Hg2+ in bovine serum albumin and actual water samples.

Graphene Oxide-Induced Prototropism and Enhancement of Fluorescence Yield of Organic Molecules in Solutions: Recent Advances.

Till date, humankind has mainly acknowledged the quenching phenomenon of graphene oxide (GO). From a fundamental science standpoint, the unique and dynamic prospects of graphene oxide have been showcased in a brief but concise manner. Worldwide research studies have proven that graphene oxide has tremendous potentiality in showcasing breakthroughs in the fields of both basic science and innovative applications. In this Perspective, the fact that, apart from the very common fluorescence quenching phenomenon, graphene oxide can also enhance fluorescence intensity, promote prototropism, demonstrate aggregation-induced emission, and itself exhibit photoluminescence properties in nonaqueous media has been highlighted. It draws attention to the fact regarding unveiling the unknown properties of graphene oxide that might be useful to scientific communities in upcoming years.

Coumarin Derivative and Gold Nanoparticle Conjugate as a Selective Fluorescent Sensor for Mercury Ion in Real Sample.

A biphenyl based coumarin fluorescent molecule, N,N'-bis(7-diethylamino-2-oxo-2H-chromen-3-yl)methylene)biphenyl-2-2'-dicarbohydrazide (molecule 1) has been synthesized and characterised. Photophysical studies of 1 exhibit solvent polarity dependent absorption and emission maxima. Citrate capped gold nanoparticles (AuNPs) have been mixed with molecule 1 for the preparation of AuNPs/1 conjugate. The association constant of the AuNPs/1 conjugate has been calculated to 4.54 × 104 M- 1. The AuNPs/1 conjugate has been found to detect Hg2+ ion selectively by fluorescence enhancement. While addition of molecule 1 into the solution of AuNPs, fluorescence intensity of 1 quenched. On addition of several monovalent, divalent and trivalent metal ion into the solution of AuNPs/1 conjugate separately, there was no change in fluorescence intensity of 1 has been observed. However, upon addition of Hg2+ ion into the solution of AuNPs/1 conjugate, the fluorescence intensity enhancement occurred, indicating released of 1 from the surface of AuNPs and probably aggregation of AuNPs took place in presence of Hg2+ ion. The AuNPs/1 conjugate has been found to have a detection limit of 2.3 × 10- 9 M for Hg2+ ion in aqueous solvent. Meanwhile, the AuNPs/1 conjugate have also been successfully applied for the determination of Hg2+ in real water samples.

A novel triaminopyridine fluorescent probe based on AIE effect with high selectivity under solvent shielding effect

A new fluorescent probe TPA-DAP with aggregation-induced emission (AIE) characteristic based on 2,6-pyridinedicarboxylic acid was synthesized for the detection of paramagnetic ions (Cu2+, Co2+, Ni2+). In the DMF/PBS (5:95, v/v, pH = 7.40) solvent mixture, the fluorescence intensity exhibited a notable enhancement of over 3-fold when compared to DMF alone. Concurrently, fluorescence quenching phenomena were observed in the presence of Cu2+, Co2+, and Ni2+, with corresponding detection limits measured at 56.4 nM, 22.4 nM, and 26.5 nM, respectively. These detection limits were found to be lower than the prescribed thresholds for Cu2+ in Class I groundwater and Co2+, Ni2+ in Class III groundwater, multi-functional detection was possible. The coordination constants were 9.07 × 105, 3.63 × 105 and 5.69 × 105, respectively. However, in the DMSO system, the probe will be highly selective in the presence of solvent shielding effects. The probe showed more than 10-fold enhancement of fluorescence intensity in DMSO/Tris-HCl (5:95, v/v, pH = 7.00) compared to DMSO and specific detection of Cu2+ with a detection limit of 36.7 nM and a coordination constant of 4.35 × 105, and was cyclically detectable in the presence of EDTA. TPA-DAP was applied for the detection of Cu2+ in actual water samples and showed good biocompatibility and recyclability, making it suitable for water testing and test paper experiments, and also for a wide range of applications in the identification of Cu2+, Co2+, Ni2+ and other bioassays in cells and zebrafish. Solvents could be selected according to actual test requirements.

The carbon dots based on Nile red: The preparation and application to probe α-synuclein fibrils

The aggregation of α-synuclein often links to the occurrence and development of Parkinson’s disease (PD). It is crucial to detect the α-synuclein fibril or monitor the aggregation of monomer for pharmacological and pathological researches, drug development and clinical diagnosis, etc. In this study, the Nile red (NR)-based carbon dots (NR-CDs) were meticulously designed and prepared. The NR-CDs were sensitive to the microenvironment, exhibiting enhanced fluorescence intensity with the elevated viscosity and decreased polarity. Thus, the NR-CDs exhibited high affinity towards α-synuclein fibril with remarkable red fluorescence enhancement, but did not respond to its monomer. Hence, the NR-CDs were used as the turn-on fluorescence probe to detect and image α-synuclein fibrils both in vitro and in vivo, as well as to monitor the aggregation process of the amyloids. Superior to NR dye, NR-CDs were characteristic of lower toxicity, better water dispersibility and anti-photobleaching resistance. In addition, the NR-CDs were demonstrated to inhibit the aggregation of α-synuclein, holding the potential as the therapeutic agent. The present study provided an effective way of designing the CDs using the small molecular dye as the carbon source to improve the biocompatibility and detectability, while reserve the selective turn-on fluorescence towards amyloid aggregates. This strategy may be generalized to construct more fluorescence probes with desired properties.

Blue-Shifted and Broadened Fluorescence Enhancement by Visible and Mode-Selective Infrared Double Excitations.

Mode-selective vibrational excitations to modify the electronic states of fluorescein dianion in methanol solutions are carried out with a femtosecond visible pulse synchronized with a tunable high-power, narrow-band picosecond infrared (IR) pulse. In this work, simultaneous intensity enhancement, peak blueshift, and line width broadening of fluorescence are observed in the visible/IR double resonance experiments. Comprehensive investigations on the modulation mechanism with scanning the vibrational excitation frequencies, tuning the time delay between the two excitation pulses, theoretical calculations, and nonlinear and linear spectroscopic measurements suggest that the fluorescence intensity enhancement is caused by the increase of the Franck-Condon factor induced by the vibrational excitations at the electronic ground state. Various enhancement effects are observed as vibrations initially excited by the IR photons relax to populate the vibrational modes of lower frequencies. The peak blueshift and line width broadening are caused by both increasing the Franck-Condon factors among different subensembles because of IR pre-excitation and the long-lived processes induced by the initial IR excitation. The results demonstrate that the fluorescence from the visible/IR double resonance experiments is not a simple sum frequency effect, and vibrational relaxations can produce profound effects modifying luminescence.

One-pot, one-step, label-free miRNA detection method based on the structural transition of dumbbell probe

In this study, we present a one-pot, one-step, label-free miRNA detection method through a structural transition of a specially designed dumbbell-shape probe, initiating a rolling circle transition (RCT). In principle, target miRNA binds to right loop of the dumbbell probe (DP), which allows structural change of the DP to circular form, exposing a sequence complementary to the T7 promoter (T7p) previously hidden within the stem. This exposure allows T7 RNA polymerase to initiate RCT, producing a repetitive Mango aptamer sequence. TO1-biotin, fluorescent dye, binds to the aptamer, inducing a detectable enhancement of fluorescence intensity. Without miR-141, the DP stays closed, RCT is prevented, and the fluorescence intensity remains low. By employing this novel strategy, target miRNA was successfully identified with a detection of 73 pM and a dynamic linear range of 0–10 nM. Additionally, the method developed enables one-pot, one-step, and label-free detection of miRNA, demonstrating potential for point-of-care testing (POCT) applications. Furthermore, the practical application of the designed technique was demonstrated by reliably detecting the target miRNA in the human serum sample. We also believe that the conceived approach could be widely used to detect not only miRNAs but also diverse biomolecules by simply replacing the detection probe.

Mechanism study of the molluscicide candidate PBQ on Pomacea canaliculata using a viscosity-sensitive fluorescent probe

PBQ [1-(4-chlorophenyl)-3-(pyridin-3-yl)urea], an enormous potent molluscicide, showed excellent Pomacea canaliculata (P. canaliculata) control activity and low toxicity for other aquatic organisms, but its snail-killing mechanisms are still not fully understood. We employed an optical method to elucidate PBQ action via a novel fluorescent viscosity probe, NCV. As the viscosity in the test solutions increased, compared with that in pure ethanol, a 54-fold fluorescence intensity enhancement of NCV was observed in 310 cP of 90% glycerol. Furthermore, NCV successfully exhibited a selective fluorescence response towards monensin-induced cellular viscosity changes in HepG2 cells. The liver, stomach, and foot plantar of the tested snails were frozen and sectioned for fluorescent imaging experiments after the treatment with different PBQ concentrations over various times. A significant fluorescent increase in the snail's liver was observed upon exposure to 0.75 mg/L PBQ for 72 h, which highlighted an increase in viscosity. Hematoxylin and eosin (HE) staining further supported PBQ-induced liver damage with a viscosity increase in P. canaliculata. Our study provides a new rapid optical visualization method to study the killing mechanisms of PBQ and may help discover new chemicals that control snail populations.

A highly sensitive micelle-sensitized spectrofluorimetric approach for analysis of montelukast in dosage forms and human plasma: Greenness assessment and application to content uniformity testing

In this work, a highly sensitive, rapid, affordable, and green micellar-enhanced spectrofluorimetric method was developed for the estimation of montelukast in its tablets and human plasma for the first time. After excitation at 224 nm, a micellar solution of cetrimide containing montelukast produced high native fluorescence emission at 404 nm. A 3-fold enhancement of the drug's fluorescence intensity and quantum yield, as well as the method's sensitivity, was produced using cetrimide as a micellar system. The experimental parameters influencing the spectrofluorimetric behavior of the studied drug were carefully investigated. The quantum yield of montelukast was also computed and found to be as high as 20 %. A straight-lined calibration plot was obtained over the concentration range of 50.0–1000.0 ng/mL. The proposed method showed high sensitivity down to the nanogram level with quantitation and detection limits of 34.68 and 11.45 ng/mL, respectively. The method was successfully applied for the analysis of the studied drug in its tablets with high % recoveries and low %RSD values. As the proposed fluorimetric method is highly sensitive and selective towards montelukast, it could successfully test the content uniformity of its tablets following the guidelines of the British Pharmacopoeia. Montelukast was also successfully determined in spiked human plasma samples due to the increased sensitivity of the method. The greenness profile and ecofriendliness of the proposed method were verified using two different green metrics, including AGREE and GAPI, which demonstrated the excellent greenness of the method. The developed method was validated according to ICH Q2 (R1) guidelines.

Host-functionalization of macrin nanoparticles to enable drug loading and control tumor-associated macrophage phenotype.

Macrophages are critical regulators of the tumor microenvironment and often present an immuno-suppressive phenotype, supporting tumor growth and immune evasion. Promoting a robust pro-inflammatory macrophage phenotype has emerged as a therapeutic modality that supports tumor clearance, including through synergy with immune checkpoint therapies. Polyglucose nanoparticles (macrins), which possess high macrophage affinity, are useful vehicles for delivering drugs to macrophages, potentially altering their phenotype. Here, we examine the potential of functionalized macrins, synthesized by crosslinking carboxymethyl dextran with L-lysine, as effective carriers of immuno-stimulatory drugs to tumor-associated macrophages (TAMs). Azide groups incorporated during particle synthesis provided a handle for click-coupling of propargyl-modified β-cyclodextrin to macrins under mild conditions. Fluorescence-based competitive binding assays revealed the ability of β-cyclodextrin to non-covalently bind to hydrophobic immuno-stimulatory drug candidates (Keq ~ 103 M-1), enabling drug loading within nanoparticles. Furthermore, transcriptional profiles of macrophages indicated robust pro-inflammatory reprogramming (elevated Nos2 and Il12; suppressed Arg1 and Mrc1 expression levels) for a subset of these immuno-stimulatory agents (UNC2025 and R848). Loading of R848 into the modified macrins improved the drug's effect on primary murine macrophages by three-fold in vitro. Intravital microscopy in IL-12-eYFP reporter mice (24h post-injection) revealed a two-fold enhancement in mean YFP fluorescence intensity in macrophages targeted with R848-loaded macrins, relative to vehicle controls, validating the desired pro-inflammatory reprogramming of TAMs in vivo by cell-targeted drug delivery. Finally, in an intradermal MC38 tumor model, cyclodextrin-modified macrin NPs loaded with immunostimulatory drugs significantly reduced tumor growth. Therefore, efficient and effective repolarization of tumor-associated macrophages to an M1-like phenotype-via drug-loaded macrins-inhibits tumor growth and may be useful as an adjuvant to existing immune checkpoint therapies.

Surfactant-based supramolecular dye assembly: A highly selective and economically viable platform for quantification of heparin antidote

Herein, we have employed a supramolecular assembly of a cationic dye, LDS-698 and a common surfactant sodium dodecyl sulfate (SDS) as a turn-on fluorescent sensor for protamine (Pr) detection. Addition of cationic Pr to the solution of dye-surfactant complex brings negatively charged SDS molecules together through strong electrostatic interaction, assisting aggregation of SDS way before its critical micellar concentration (CMC). These aggregates encapsulate the dye molecules within their hydrophobic region, arresting non-radiative decay channels of the excited dye. Thus, the LDS-698•SDS assembly displays substantial enhancement in fluorescence intensity that follows a nice linear trend with Pr concentration, providing limit of detection (LOD) for Pr as low as 3.84(±0.11) nM in buffer, 124.4(±6.7) nM in 1% human serum and 28.3(±0.5) nM in 100% human urine. Furthermore, high selectivity, low background signal, large stokes shift, and emission in the biologically favorable deep-red region make the studied assembly a promising platform for Pr sensing. As of our knowledge it is the first ever Pr sensory platform, using a very common surfactant (SDS), which is economically affordable and very easily available in the market. This innovative approach can replace the expensive, exotic and specialized chemicals considered for the purpose and thus showcase its potential in practical applications.

A novel low-cytotoxicity fluorescent probe applied to monitor pH in vivo and in vitro

Environmental pH plays an irreplaceable role in both cellular processes and production, and anomalous pH changes within cells may lead to various diseases. To tackle this issue, we designed and synthesized the novel low-cytotoxicity fluorescent probe called NAP-MP. The probe incorporates 1,8-naphthalimide as the fluorescence emitter, 1-methylpiperazine as the pH-sensitive moiety, and utilizes 3-aminopropyltriethoxysilane to improve its biocompatibility. The fluorescence of NAP-MP inhibits the photoinduced electron transfer (PET) process with the protonation of 1-methylpiperazine, resulting in the enhancement of fluorescence intensity. Density functional theory calculations have also confirmed the fluorescence mechanism. The probe demonstrates high selectivity, photostability and recyclability. The hydrogel prepared by the probe can detect different concentrations of ammonia in the air. In addition, due to its low toxicity and good biocompatibility, this probe has been successfully employed to observe pH changes in living HeLa cells. Overall, the development of this probe offers significant potential in the field of pH sensing, allowing for precise monitoring of pH levels in both environmental and biological systems.

Remarkable emission enhancement of CsPbBr3 quantum dots based on an Ag nanoparticle-Ag film plasmonic coupling structure.

All-inorganic halide perovskite quantum dots (QDs) have recently received much attention due to their excellent optoelectronic properties. And their emission properties still need to be improved for further applications. Here, we demonstrated a remarkable emission enhancement of the CsPbBr3 QDs based on an Ag nanoparticle-Ag film plasmonic coupling structure. Through precise control of the gap distance between Ag nanoparticle and Ag film, the localized surface plasmon resonance (LSPR) peak was tuned to match the emission wavelength of the CsPbBr3 QDs. We achieved a 30-fold fluorescence intensity enhancement and a lower lasing threshold, which is 25% of that of the CsPbBr3 QDs without plasmonic coupling structure. It is attributed to that the plasmonic coupling structure exhibits an extremely strong local electric field owing to the coupling between LSPR of Ag nanoparticle and surface plasmon polariton of Ag film. This work provides an effective way to enhance the optical emission of perovskite QDs and promotes the further exploration of on-chip light source.