Energy Spread Research Articles

The measurement of photocathode transverse energy distribution curves (TEDCs) using the transverse energy spread spectrometer (TESS) experimental system.

The minimum achievable particle beam emittance in an electron accelerator depends strongly on the intrinsic emittance of the photocathode electron source. This is measurable as the mean longitudinal and transverse energy spreads in the photoemitted electron beam (MLE and MTE respectively); consequently, MLE and MTE are notable figures of merit for photocathodes used as electron sources in particle accelerators. The overall energy spread is defined by the sum of the MTE and the MLE, and the minimization of MTE is crucial to reduce emittance and thus generate a high-brightness electron beam. Reducing the electron beam emittance in an accelerator that drives a Free-Electron Laser (FEL) delivers a significant reduction in the saturation length for an x-ray FEL, thus reducing the machine's construction footprint and operating costs while increasing the x-ray beam brightness. The ability to measure the transverse energy distribution curve of photoelectrons emitted from a photocathode is a key enabler in photocathode research and development that has prompted the Accelerator Science and Technology Centre (ASTeC) at the STFC Daresbury Laboratory to develop the Transverse Energy Spread Spectrometer to make these crucial measurements. We present details of the design for the upgraded TESS instrument with measured data for copper (100), (110), and (111) single-crystal photocathodes illuminated at UV wavelengths around 266nm.

Can Digital Finance Promote Peak Carbon Dioxide Emissions? Evidence from China.

This paper uses Chinese provincial panel data from 2011 to 2019, measures CO2 emissions of provinces in China using the IPCC method, and explores the impact of digital finance on CO2 emissions through the SAR model and SDM. Empirical study shows that digital finance significantly reduces CO2 emissions. Digital finance reduces CO2 emissions by promoting energy industrial structure transformation and spreads to surrounding areas through spillover effects, contributes to increasing green patents granted and thus reduces regional CO2 emissions, advances the green technological progress and therefore inhibits CO2 emissions, but reduces the green technological progress in surrounding areas and increases CO2 emissions due to the siphon effect. With the development of digital finance itself, the higher the level of financial regulation, green development and the green finance index, the better the effect of digital finance on CO2 emission reduction. Additionally, digital finance significantly reduces CO2 emissions in the south of China.

Adsorption structure deteriorating negative electron affinity under the H2O environment

Photocathodes with negative electron affinity (NEA) characteristics have various advantages, such as small energy spread, high spin polarization, and ultrashort pulsing. Nitride semiconductors, such as GaN and InGaN, are promising materials for NEA photocathodes because their lifetimes are longer than those of other materials. In order to further prolong the lifetime, it is important to better understand the deterioration of NEA characteristics. The adsorption of residual gases and back-bombardment by ionized residual gases shorten the lifetime. Among the adsorbed residual gases, H2O has a significant influence. However, the adsorption structures produced by the reaction with H2O are not comprehensively studied so far. In this study, we investigated adsorption structures that deteriorated the NEA characteristics by exposing InGaN and GaAs to an H2O environment and discussed the differences in their lifetimes. By comparing the temperature-programmed desorption curves with and without H2O exposure, the generation of CsOH was confirmed. The desorption of CsOH demonstrated different photoemission behaviors between InGaN and GaAs results. InGaN recovered its NEA characteristics, whereas GaAs did not. Considering the Cs desorption spectra, it is difficult for an NEA surface on InGaN to change chemically, whereas that for GaAs changes easily. The chemical reactivity of the NEA surface is different for InGaN and GaAs, which contributes to the duration of photoemission. We have attempted to prolong the lifetime of InGaN by recovering its NEA characteristics. We found that InGaN with NEA characteristics can be reused easily without thermal treatment at high temperatures.

High transformer ratio electron acceleration for CEPC plasma injector

The CEPC Plasma Injector is designed as the beam energy multiplier for avoiding the dipole magnet issue of the Circular Electron Positron Collider (CEPC) booster. Besides the final energy, other requirements including the energy stability, bunch charge and energy spread all make the injector design very challenging. With respect to the electron acceleration, a high transformer ratio plasma wakefield acceleration stage is necessary if we constrain the beam energy at the end of the linac and the plasma injector are 10[Formula: see text]GeV and 45.5[Formula: see text]GeV, respectively. In this work, we use the particle-in-cell code QuickPIC to design the electron acceleration stage. Based on the current conceptual design, a comprehensive analysis of single-parameter tolerance is performed. Through the tolerance studies, we obtain some useful guidance for the further optimization of the injector.

Model-independent determination of the dipole response of Zn66 using quasimonoenergetic and linearly polarized photon beams

[Background] Photon strength functions are an important ingredient in calculations relevant for the nucleosynthesis of heavy elements. The relation to the photoabsorption cross section allows to experimentally constrain photon strength functions by investigating the photo-response of atomic nuclei. [Purpose] We determine the photoresponse of $^{66}$Zn in the energy region of 5.6 MeV to 9.9 MeV and analyze the contribution of the "elastic" decay channel back to the ground state. In addition, for the elastic channel electric and magnetic dipole transitions were separated. [Methods] Nuclear resonance fluorescence experiments were performed using a linearly-polarized quasi-monoenergetic photon beam at the High Intensity $\gamma$-ray Source. Photon beam energies from 5.6 to 9.9 MeV with an energy spread of about 3% were selected in steps of 200-300 keV. Two High Purity Germanium detectors were used for the subsequent $\gamma$-ray spectroscopy. [Results] Full photoabsorption cross sections are extracted from the data making use of the monoenergetic character of the photon beam. For the ground-state decay channel, the average contribution of electric and magnetic dipole strengths is disentangled. The average branching ratio back to the ground state is determined as well. [Conclusions] The new results indicate lower cross sections when compared to the values extracted from a former experiment using bremsstrahlung on $^{66}$Zn. In the latter, the average branching ratio to the ground state is estimated from statistical-model calculations in order to analyze the data. Corresponding estimates from statistical-model calculations underestimate this branching ratio compared to the values extracted from the present analysis, which would partly explain the high cross sections determined from the bremsstrahlung data.

Bunched Proton Acceleration from a Laser-Irradiated Cone Target

Laser-driven ion acceleration is an attractive technique to generate compact high-energy ion sources. Currently, among various physical and technical issues to be solved, boosting the ion energy and reducing the energy spread represent the key challenges with this technique. Here we present a scheme to tackle these challenges by using a hundred-terawatt-class laser pulse irradiating a cone target. Three-dimensional particle-in-cell simulations show that a large number of electrons are dragged out of the cone walls and accelerated to hundreds of MeV by the laser fields inside the cone. When these energetic dense electron beams pass through the cone target tip into vacuum, a very high bunching acceleration field, up to tens of TV/m, quickly forms. Protons are accelerated and simultaneously bunched by this field, resulting in quasimonoenergetic proton beams with 100 MeV energy and low energy spread of about 2%. Results exploring the scaling of the proton beam energy with laser and target parameters are presented, indicating that the scheme is robust. This opens an efficient route for compact high-energy proton sources for fundamental research and biomedical applications.

Energy spread blowup by intrabeam scattering and microbunching at the SwissFEL injector

We present high-resolution measurements of the electron beam energy spread at the SwissFEL injector as a function of the electron bunch charge, the optics, and the longitudinal dispersion of the lattice. The measured values are in general an order of magnitude higher than what is predicted by standard simulation codes. The measured dependences indicate that the energy spread blowup is caused primarily by intrabeam scattering and microbunching instabilities, effects not covered in the conventional modeling of radio-frequency injectors. We present further a numerical model that qualitatively reproduces the experimental data and an approach to mitigate the energy spread deterioration. The work underlines the importance of considering the energy spread in the optimization and design of high-brightness electron beam sources and the need to develop new models to adequately understand and simulate the observed physics effects.

Electron beam energy slicing performance in laser wakefield acceleration

The first stage of electron acceleration, the plasma cathode, is a key part of LWFA. Output parameters of this stage such as beam charge, mean energy, energy spread, and emittance can be varied in a rather broad range depending on laser pulse and gas target conditions. These parameters are usually evaluated via particle-in-cell (PIC) simulations. However, if an essential improvement of the beam quality could be further performed with a conventional beamline, the selection of an acceleration regime, including laser pulse and gas target characteristics, should be done taking into account not only PIC simulations but also beam transport simulations. Here is shown that improvements of electron beam quality via energy slicing using magneto-optics (MO) may become an important step in developing full-optical electron accelerators and radiation devices. Since the typical energy of electrons presently achieves sub-GeV in a single acceleration stage, the elaboration of slicing techniques for quasi-mono-energetic, high density LWFA beams is of particular interest. Depending on the efficiency of beam slicing the reverse problem of initial beam energy distribution and, therefore, a proper acceleration regime can be solved. An efficient slicing may allow operation with broader beam energy spreads, higher charges, and getting better stability in contrast to narrower beam energy spreads requiring far more precise control over laser and gas target parameters. Even though this technique has been used in classical particle accelerators, its limitations have not been well studied in LWFA with their less stable beams. MO slicing is explored numerically with use of realistic LWFA electron beams obtained from 3D PIC simulations at various target parameters.

Self-stabilizing positron acceleration in a plasma column

Plasma accelerators sustain extreme field gradients, and potentially enable future compact linear colliders. Although tremendous progress has been achieved in accelerating electron beams in a plasma accelerator, positron acceleration with collider-relevant parameters is challenging. A recently proposed positron acceleration scheme relying on the wake generated by an electron drive beam in a plasma column has been shown to be able to accelerate positron witness beams with low emittance and low energy spread. However, since this scheme relies on cylindrical symmetry, it is possibly prone to transverse instabilities that could lead, ultimately, to beam break-up. In this article, we show that the witness beam itself is subject to various damping mechanisms and, therefore, this positron acceleration scheme is inherently stable towards misalignment of the drive and witness beams. This enables stable, high-quality plasma-based positron acceleration.

High efficiency uniform positron beam loading in a hollow channel plasma wakefield accelerator

We propose a novel positron beam loading regime in a hollow plasma channel that can efficiently accelerate $e^+$ beam with high gradient and narrow energy spread. In this regime, the $e^+$ beam coincides with the drive $e^-$ beam in time and space and their net current distribution determines the plasma wakefields. By precisely shaping the beam current profile and loading phase according to explicit expressions, three-dimensional Particle-in-Cell (PIC) simulations show that the acceleration for $e^+$ beam of $\sim$nC charge with $\sim$GV/m gradient, $\lesssim$0.5% induced energy spread and $\sim$50% energy transfer efficiency can be achieved simultaneously. Besides, only tailoring the current profile of the more tunable $e^-$ beam instead of the $e^+$ beam is enough to obtain such favorable results. A theoretical analysis considering both linear and nonlinear plasma responses in hollow plasma channels is proposed to quantify the beam loading effects. This theory agrees very well with the simulation results and verifies the robustness of this beam loading regime over a wide range of parameters.

Characteristics and related mechanisms of the persistent extreme precipitation in August 2020 over Western China

The persistent heavy precipitation that occurred in most of West China (WC) during August 11–18, 2020, generated the highest rainfall record since recording began in 1961 and was selected as one of the top 10 worst national natural disasters of 2020 in China. Favorable circulation was sustained during August; WC was positioned between two anomalous high-pressure centers over the Tibetan Plateau and Sea of Japan and an anomalous low-pressure center over Mongolia located on its north side, which created a stable and long trough and formed a low-pressure center over WC. At 200 hPa, the subtropical westerly jet was much stronger than average and southward, and the South Asian High (SAH) was strong and extended eastward to 150°E. At 500 hPa, the western Pacific subtropical high (WPSH) was westward and exceptionally strong, which helped abundant water vapor reach the southeastern part of WC and provided favorable dynamic and thermodynamic conditions for precipitation in this region. In addition, the eastward extension of the SAH promotes the westward extension of WPSH, which collectively enhanced the precipitation in WC. At 850 hPa, the low-level jet corresponding to the west-extending subtropical high from the Sea of Japan to WC further enhanced and guided the water vapor transport to WC. In addition, the Mei-Yu front over the Yangtze River Basin in June and July strengthened the northwestward spread of diabatic heating, transient energy, and wave activity fluxes, which likely influenced the large-scale circulation factors and reinforced the precipitation in WC in August 2020.

Temperature evolution of dense gold and diamond heated by energetic laser-driven aluminum ions

Recent studies have shown that energetic laser-driven ions with some energy spread can heat small solid-density samples uniformly. The balance among the energy losses of the ions with different kinetic energies results in uniform heating. Although heating with an energetic laser-driven ion beam is completed within a nanosecond and is often considered sufficiently fast, it is not instantaneous. Here we present a theoretical study of the temporal evolution of the temperature of solid-density gold and diamond samples heated by a quasimonoenergetic aluminum ion beam. We calculate the temporal evolution of the predicted temperatures of the samples using the available stopping power data and the SESAME equation-of-state tables. We find that the temperature distribution is initially very uniform, which becomes less uniform during the heating process. Then, the temperature uniformity gradually improves, and a good temperature uniformity is obtained toward the end of the heating process.

Novel bunch compressor chicane: The five-bend chicane

Four dipole magnetic chicanes are typically used in high-performance accelerators to compress electron bunches to their final peak currents but subject the beam to emittance dilution due to the coherent synchrotron radiation (CSR) effect. In this paper, we present a new magnetic bunch compressor geometry designed to locally suppress the CSR-induced emittance degradation called the five-bend chicane. We will include a simulation study comparing a five-bend chicane to the nominal four-bend chicane of the LCLS-II-HE's second bunch compressor (BC2) beamline. The study will consist of emittance and energy spread growth due to CSR using a one-dimensional, elegant, and two-dimensional, csrtrack, CSR algorithm in free space, and the free-electron laser performance using genesis.

Heisenberg’s uncertainty principle in the PTOLEMY project: A theory update

We discuss the consequences of the quantum uncertainty on the spectrum of the electron emitted by the β-processes of a tritium atom bound to a graphene sheet. We analyze quantitatively the issue recently raised by Cheipesh, Cheianov, and Boyarsky [Phys. Rev. D 104, 116004 (2021)], and discuss the relevant timescales and the degrees of freedom that can contribute to the intrinsic spread in the electron energy. We perform careful calculations of the potential between tritium and graphene with different coverages and geometries. With this at hand, we propose possible avenues to mitigate the effect of the quantum uncertainty.Received 25 March 2022Accepted 8 August 2022DOI:https://doi.org/10.1103/PhysRevD.106.053002Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI. Funded by SCOAP3.Published by the American Physical SocietyPhysics Subject Headings (PhySH)Physical SystemsCarbon-based materialsGrapheneNeutrinosParticles & FieldsCondensed Matter, Materials & Applied PhysicsGravitation, Cosmology & Astrophysics

Injection induced by coaxial laser interference in laser wakefield accelerators

We propose a new injection scheme that can generate electron beams with simultaneously a few permille energy spread, submillimeter milliradian emittance, and more than a 100 pC charge in laser wakefield accelerators. In this scheme, a relatively loosely focused laser pulse drives the plasma wakefield, and a tightly focused laser pulse with similar intensity triggers an interference ring pattern that creates onion-like multisheaths in the plasma wakefield. Owing to the change in wavefront curvature after the focal position of the tightly focused laser, the innermost sheath of the wakefield expands, which slows down the effective phase velocity of the wakefield and triggers injection of plasma electrons. Both quasicylindrical and fully three-dimensional particle-in-cell simulations confirm the generation of beams with the above mentioned properties.

Systematic uncertainties in integrated luminosity measurement at CEPC

The very forward region is one of the most challenging regions to instrument at a future e + e - collider. At CEPC, machine-detector interface includes, among others, a calorimeter dedicated for precision measurement of the integrated luminosity at a per mill level or better. Here we review a feasibility of such precision, from the point of view of systematic effects arising from luminometer mechanical precision and positioning, beam-related requirements and physics background from two-photon processes. The impact of the beam energy spread and its uncertainty on the integrated luminosity precision is also discussed, as well as the achievable beam energy spread precision with the post-CDR CEPC beams.

3D beam shaping methods for ultrashort‐pulsed laser material processing

AbstractUltrashort‐pulse (USP) lasers enable microlevel manipulation of material surfaces and work on the bulk of transparent materials with almost no thermal effects. One major bottleneck that is limiting the processing speed with USP lasers is the effective spreading of laser energy in the processed material. Diffractive optical elements (DOE) are a leading method of solving this bottleneck. In this article, we review the concept of 3D diffractive light shaping for USP lasers and show its usefulness in various industrial USP laser applications.

Energy Compression and Stabilization of Laser-Plasma Accelerators.

Laser-plasma accelerators outperform current radio frequency technology in acceleration strength by orders of magnitude. Yet, enabling them to deliver competitive beam quality for demanding applications, particularly in terms of energy spread and stability, remains a major challenge. In this Letter, we propose to combine bunch decompression and active plasma dechirping for drastically improving the energy profile and stability of beams from laser-plasma accelerators. Realistic start-to-end simulations demonstrate the potential of these postacceleration phase-space manipulations for simultaneously reducing an initial energy spread and energy jitter of ∼1-2% to ≲0.1%, closing the beam-quality gap to conventional acceleration schemes.

Technical note: Characteristics of the energy spread kernels of scattered radiation in an x-ray room.

To describe the scattered radiation spectra inside an x-ray room for different scatteringconditions. Monte Carlo simulations of an x-ray room using phantoms of different size, varying field sizes, and a range of mono-energetic beams were carried out. For each energy, the particle fluence spectrum of scattered photons was collected at different spherical zones to describe the radiation reaching the different boundaries of the x-ray room. The effect on the scattered spectrum of the room floor was alsoconsidered. The scattered spectra for mono-energetic primary beams at a given spherical zone give rise to oriented energy spread kernels (OESKs) that can be used to calculate the scattered spectrum for any poly-energetic beam at that zone. Despite the large differences, which can be seen in the OESKs when the scattering conditions vary, an important invariance is also observed: the position of the broad scatter peak for a given primary energy andzone. The result of breaking down the calculation of the scattered radiation spectrum into the different factors that influence it allows estimating the spectrum in a wide range of situations. The invariant position of the broad scatter peak can be used to estimate the highest energy of the scattered photons for a given primary energy and zone, which may determine radiation shieldingneeds.

Slice energy spread measurement in the low energy photoinjector

Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($\ensuremath{\ge}100\text{ }\text{ }\mathrm{MeV}$) photoinjectors at SwissFEL and European x-ray free electron laser (XFEL) have reported much higher slice energy spread than expected at their XFEL working points (200--250 pC). In this paper, a new method for measuring slice energy spread at lower beam energy ($\ensuremath{\sim}20\text{ }\text{ }\mathrm{MeV}$) is proposed and demonstrated at the PhotoInjector Test facility at DESY Zeuthen, and the results for 250 pC are much lower than those measured at high energy injectors.