Energy Efficient Depth-Based Routing Research Articles

QTAR: A Q-learning-based topology-aware routing protocol for underwater wireless sensor networks

In this paper, an energy-efficient Q-learning-based routing protocol, called the Q-learning-based topology-aware routing (QTAR) protocol, is proposed for underwater wireless sensor networks. Unlike existing protocols, QTAR considers the network topology to determine the next-forwarder (NF) candidates along the routing path and adopts Q-learning to aid in the optimal global decision-making of an NF from the NF candidates. In addition, QTAR utilizes implicit cut-vertex recognition to optimize NF selection, alleviating the energy wastage that arises from forwarding data packets away from the sink. In our study, we evaluated the performance of QTAR by comparing it with the Q-learning-based energy-efficient and lifetime-aware routing protocol (QELAR), energy-efficient depth-based routing protocol (EEDBR), Q-learning-based delay-aware routing (QDAR), and reinforcement learning-based opportunistic routing protocol (RLOR) in terms of the energy consumption, latency, and network lifetime. Our results revealed that QTAR demonstrated the advantages of a lower energy consumption, shorter latency, and longer network lifetime in the percentage ranges of 26.08 to 70.12, 22.2 to 50, and 37.8 to 75, respectively, than QELAR, EEDBR, QDAR, and RLOR.

Analysis of CoDBR and CEEDBR Protocols in Underwater Wireless Sensor Networks

UWSNs (underwater wireless sensor networks) are essential for doing any type of task underwater. Huge broadcast lag, great error degree, small bandwidth, and restricted energy in Underwater Sensor Networks interest concentration of utmost investigators. In UWSNs, the efficient use of energy is one of the main problems, as the substitution of energy sources in this kind of location is extremely costly. UWSNs are utilized in many fields, like measuring pollution, issuing tsunami cautions, conducting offshore surveys, and strategic tracing. For numerous functions, the efficacy and dependability of network regarding prominent operation, energy preservation, small bit error rate, and decreased interruption are fundamental. Nevertheless, UWSN’s exclusive features like small bandwidth accessibility, large interruptions in broadcast, very vivacious network topology, and extreme possibility of error present numerous problems in the growth of effective and dependable communication procedures. As opposed to current deepness-based routing techniques, we are focusing on CoDBR (Cooperative Depth-based Routing) and CEEDBR (Cooperative Energy Efficient Depth-based Routing) procedures to improve network lifespan, energy efficacy, and amount.

Analysis of CoDBR and CEEDBR protocols in underwater wireless sensor networks

Underwater wireless sensor networks (UWSNs) are essential for doing any type of task underwater. Huge broadcast lag, great error degree, small bandwidth, and restricted energy in Underwater Sensor Networks interest concentration of utmost investigators. In UWSNs, the efficient use of energy is one of the main problems, as the substitution of energy sources in this kind of location is extremely costly. UWSNs are utilized in many fields, like measuring pollution, issuing tsunami cautions, conducting offshore surveys, and strategic tracing. For numerous functions, the efficacy and dependability of network regarding prominent operation, energy preservation, small bit error rate, and decreased interruption are fundamental. Nevertheless, UWSN’s exclusive features like small bandwidth accessibility, large interruptions in broadcast, very vivacious network topology, and extreme possibility of error present numerous problems in the growth of effective and dependable communication procedures. As opposed to current deepness-based routing techniques, we are focusing on CoDBR (Cooperative Depthbased Routing) and CEEDBR (Cooperative Energy Efficient Depth-based Routing) procedures to improve network lifespan, energy efficacy, and amount

A depth-controlled and energy-efficient routing protocol for underwater wireless sensor networks

Underwater wireless sensor network attracted massive attention from researchers. In underwater wireless sensor network, many sensor nodes are distributed at different depths in the sea. Due to its complex nature, updating their location or adding new devices is pretty challenging. Due to the constraints on energy storage of underwater wireless sensor network end devices and the complexity of repairing or recharging the device underwater, this is highly significant to strengthen the energy performance of underwater wireless sensor network. An imbalance in power consumption can cause poor performance and a limited network lifetime. To overcome these issues, we propose a depth controlled with energy-balanced routing protocol, which will be able to adjust the depth of lower energy nodes and be able to swap the lower energy nodes with higher energy nodes to ensure consistent energy utilization. The proposed energy-efficient routing protocol is based on an enhanced genetic algorithm and data fusion technique. In the proposed energy-efficient routing protocol, an existing genetic algorithm is enhanced by adding an encoding strategy, a crossover procedure, and an improved mutation operation that helps determine the nodes. The proposed model also utilized an enhanced back propagation neural network for data fusion operation, which is based on multi-hop system and also operates a highly optimized momentum technique, which helps to choose only optimum energy nodes and avoid duplicate selections that help to improve the overall energy and further reduce the quantity of data transmission. In the proposed energy-efficient routing protocol, an enhanced cluster head node is used to select a strategy that can analyze the remaining energy and directions of each participating node. In the simulation, the proposed model achieves 86.7% packet delivery ratio, 12.6% energy consumption, and 10.5% packet drop ratio over existing depth-based routing and energy-efficient depth-based routing methods for underwater wireless sensor network.

A Robust, Scalable, and Energy-Efficient Routing Strategy for UWSN Using a Novel Vector-Based Forwarding Routing Protocol

The Underwater Wireless Sensor Network (UWSN) is capable of supporting a wide range of low-data-rate acoustic sensor networks, as well as scalability and energy-efficient routing algorithms. Furthermore, because of the lower bandwidth and longer propagation delays, energy consumption is a major concern with underwater networks. Because radio transmissions are unstable in deep water, a UWSN often communicates via acoustic channels. UWSN features create constraints on data packet transmission and energy-efficient routing. The hardest challenge is creating an effective routing protocol for UWSNs that uses sensor node localization. There have been several routing algorithms reported for identifying nodes via a localization process. This paper proposes a novel vector-based forwarding (NVBF) and efficient depth-based routing (DBR) protocol to provide robust, scalable, and energy-efficient routing. Efficient DBR is a stochastic model that can survive even in acoustic channels with substantial transmission loss. An adjacent node table is created to decrease the energy consumption and end-to-end delay by limiting the adjacent node request generated every single time. The redundant packet transmission is reduced by creating a packet queue which also minimizes the energy. The NVBF algorithm uses a random waiting time to overcome the collision that occurs while sending the acknowledgment packets. Based on the previous sender’s depth and the depth of the own node, the DBR makes packet transmission decisions. The experiments are conducted using the NS3 simulator and the efficiency of the proposed approach is evaluated in terms of propagation delay, network lifetime, energy consumption, and delivery ratio. When compared to the existing techniques such as DBR, VBF, and energy-efficient DBR (EDBR), the proposed methodology offers improvement up to 40% and 30% in terms of propagation delay and delivery ratio.

EERBCR: Energy-efficient regional based cooperative routing protocol for underwater sensor networks with sink mobility

The balance energy consumption of nodes is a key factor to prolong network lifetime. A sensor node in Underwater Wireless Sensor Networks (UWSNs), has very limited power battery, therefore, utilizing the power battery in efficient manner is still a challenging task. To enhance network lifetime, we proposed an Energy-Efficient Regional base Cooperative Routing (EERBCR) protocol with sink mobility for UWSNs. In EERBCR, we divided the network field in 12 regions, three by four vertically and horizontally respectively. Total numbers of four mobile sinks are positioned, having equal distance to each other while 100 sensors nodes are deployed randomly. Each mobile sink travels on pre-defined straight path and covers 3 regions. All the sensor nodes are in sleeping mode, until the sink arrives to their region, upon the arrival of sink node to a region, it broadcasts a hello message. All the nodes in that region receive that message and activate themselves. When the sink is about to leave the region, it broadcasts another packet, informing the nodes about its departure so that the nodes go back into sleeping mode. The simulation results show the validity of EERBCR as it performed better than Depth-Based Routing (DBR), Energy Efficient Depth-Based Routing (EEDBR) and depth and energy-aware dominating set (DEADS) protocols.

An Energy Efficient Routing Approach for IoT Enabled Underwater WSNs in Smart Cities.

Nowadays, there is a growing trend in smart cities. Therefore, Terrestrial and Internet of Things (IoT) enabled Underwater Wireless Sensor Networks (TWSNs and IoT-UWSNs) are mostly used for observing and communicating via smart technologies. For the sake of collecting the desired information from the underwater environment, multiple acoustic sensors are deployed with limited resources, such as memory, battery, processing power, transmission range, etc. The replacement of resources for a particular node is not feasible due to the harsh underwater environment. Thus, the resources held by the node needs to be used efficiently to improve the lifetime of a network. In this paper, to support smart city vision, a terrestrial based “Away Cluster Head with Adaptive Clustering Habit” (ACH) is examined in the specified three dimensional (3-D) region inside the water. Three different cases are considered, which are: single sink at the water surface, multiple sinks at water surface,, and sinks at both water surface and inside water. “Underwater (ACH)” (U-(ACH)) is evaluated in each case. We have used depth in our proposed U-(ACH) to examine the performance of (ACH) in the ocean environment. Moreover, a comparative analysis is performed with state of the art routing protocols, including: Depth-based Routing (DBR) and Energy Efficient Depth-based Routing (EEDBR) protocol. Among all of the scenarios followed by case 1 and case 3, the number of packets sent and received at sink node are maximum using DEEC-(ACH) protocol. The packets drop ratio using TEEN-(ACH) protocol is less when compared to other algorithms in all scenarios. Whereas, for dead nodes DEEC-(ACH), LEACH-(ACH), and SEP-(ACH) protocols’ performance is different for every considered scenario. The simulation results shows that the proposed protocols outperform the existing ones.

FLCEER

Underwater acoustic sensor networks (UASN) play a crucial role in various applications such as tsunami detection, surveillance of the ocean by the defense department, monitoring offshore oil, and identifying gas basins underwater. UASNs can be one of the supporting infrastructures for the Internet of Things (IoT). UASNs have the problems of long latency, high bit error rate, and low bandwidth. These pose various challenges such as high consumption of energy, low reliability, low packet retransmission, and high delay for UASNs. To overcome the shortcomings mentioned above, various approaches are suggested. This article proposes a multi-layer fuzzy logic cluster-based energy-efficient routing protocol for UASNs. It splits the network area into equal sized rings. The priority number (PRN) is utilized for all underwater cluster heads (UCHs). Based on the highest PRN, the UCH starts communicating among UCHs. Here, the PRN makes the task very selective avoiding collisions and also reducing propagation delays. The cluster formation is done by sending a message to all underwater cluster members (UCMs) and the selection of UCH and UCM are done. Each has a threshold value. The intra-ring clustering process splits a ring into equal-sized clusters. Additionally, inter-cluster routing applies the fuzzy logic metrics to choose the optimum data route in transferring the data from the underwater cluster head (UCH) to the sink node (SN). It is tested using Aqua-Sim simulation which is based on NS2. It is compared with an existing protocol such as multi-layer cluster energy efficient (MLCEE), depth-based routing (DBR), energy efficient DBR (EEDBR). The results prove that it has improved energy efficiency, packet delivery ratio, throughput, and the network's lifetime.

Design of Shrewd Underwater Routing Synergy Using Porous Energy Shells

During the course of ubiquitous data monitoring in the underwater environment, achieving sustainable communication links among the sensor nodes with astute link quality seems an ordeal challenge. Energy utilization has a direct impact because all active devices are battery dependent and no charging or replacement actions can be made when cost- effective data packet delivery has been set as the benchmark. Hop link inspection and the selection of a Shrewd link through a resurrecting link factor have been nothing short of a bleak challenge, and only possible after meticulous research to develop a shrewd underwater routing synergy using extra porous energy shells (SURS-PES) which has never been conducted before. After broadcasting packets, the sensor node conducts a link inspection phase, thereby, if any link is found to be less than or equal to 50% shaky, the destination receiving node adds its residual energy status and returns it to the source node which adds some unusable energy porous shell to strengthen the link from 5% to a maximum of 90% and sends it only to the targeted node, therefore, an unaltered data packet delivery is anticipated. Performance evaluation was carried out using an NS2 simulator and the obtained results were compared with depth-based routing (DBR) and energy efficient DBR (EEDBR) to observe the outcomes with results that confirmed the previously mentioned direction for research in this area.

Introducing robustness in DBR routing protocol

Exploration of advanced technologies employed for streamlining UWSN devices is a hot issue. Challenges faced by UWSN are high power consumption, increased propagation latency and dynamic topology of nodes. Depth-based routing protocols are designed to cope these challenges that use depth information to forward data toward surface sink. Depth-based routing and energy efficient depth-based routing are widely used routing protocols in UWSN. DBR has low stability period due to un-necessary data forwarding and high load on mid and low-depth nodes. In DBR quick energy consumption of nodes creates large holes in the network. The path connectivity hole leads retransmission of packets that consumes excessive energy, route-update cost and end-to-end delay. In this paper, the proposed robust depth-based routing protocol is used to overcome deficiencies of DBR by limiting number of forwarding nodes considering variation in depth-threshold, holding-time and distance-differences to minimise end-to-end delay.

Monitoring square and circular fields with sensors using energy-efficient cluster-based routing for underwater wireless sensor networks

In this article, to monitor the fields with square and circular geometries, three energy-efficient routing protocols are proposed for underwater wireless sensor networks. First one is sparsity-aware energy-efficient clustering, second one is circular sparsity-aware energy-efficient clustering, and the third one is circular depth–based sparsity-aware energy-efficient clustering routing protocol. All three protocols are proposed to minimize the energy consumption of sparse regions, whereas sparsity search algorithm is proposed to find sparse regions and density search algorithm is used to find dense regions of the network field. Moreover, clustering is performed in dense regions to minimize redundant transmissions of a data packet, while sink mobility is exploited to collect data from sensor nodes with an objective of minimum energy consumption. A depth threshold [Formula: see text] value is also used to minimize number of hops between source and destination for less energy consumption. Simulation results show that our schemes perform better than their counter-part schemes (depth-based routing and energy-efficient depth-based routing) in terms of energy efficiency.

On energy efficiency in underwater wireless sensor networks with cooperative routing

In this paper, we exploit cooperative communication for designing an energy-efficient routing algorithm in underwater wireless sensor networks (UWSNs). Each network node is equipped with a single omnidirectional antenna and multiple node coordinates while taking advantage of spatial diversity. This research work is limited in scope to amplify-and-forward (AF) scheme at the relay node and fixed ratio combining (FRC) strategy at the receiver node. Cooperative diversity at the physical layer and multi-hop routing at the network layer enable us to formulate minimum energy routing as a joint optimization of the transmission power at physical layer and link selection at the network layer. Simulations results show that our proposed cooperative energy-efficient routing for UWSN (Co-EEUWSN) performs better than the selected non-cooperative routing protocols (depth-based routing (DBR) and energy-efficient DBR (EEDBR)) and cooperative DBR (Co-DBR) in terms of packet delivery ratio, end-to-end delay, and energy efficiency.

Comparison of Localization Free Routing Protocols in Underwater Wireless Sensor Networks

Underwater Wireless Sensor Network (UWSN) is newly developed branch of Wireless Sensor network (WSN). UWSN is used for exploration of underwater resources, oceanographic data collection, flood or disaster prevention, tactical surveillance system and unmanned underwater vehicles. UWSN uses sensors of small size with a limited energy, memory and allows limited range for communication. Due to multiple differences from terrestrial sensor network, radio waves cannot be used over here. Acoustic channel are used for communication in deep water, which has many limitations like low bandwidth, high end to end delay and path loss. With the above limitations while using acoustic waves, it is very important to develop energy efficient and reliable protocols. Energy efficient communication in underwater networks has become uttermost need of UWSN technology. The main aim nowadays is to operate sensor with smaller battery for a longer time. This paper will analyse various routing protocols in the area of UWSN through simulation. This paper will analyse Depth Based Routing (DBR), Energy Efficient Depth Based Routing (EEDBR) and Hop by Hop Dynamic Addressing Based (H2-DAB) protocol through simulation. This comparison is carried out on the basis of total consumed energy, end to end delay, path loss and data delivery ratio.

Co-UWSN: Cooperative Energy-Efficient Protocol for Underwater WSNs

Sensor networks feature low-cost sensor devices with wireless network capability, limited transmit power, resource constraints, and limited battery energy. Cooperative routing exploits the broadcast nature of wireless medium and transmits cooperatively using nearby sensor nodes as relays. It is a promising technique that utilizes cooperative communication to improve the communication quality of single-antenna sensor nodes. In this paper, we propose a cooperative transmission scheme for underwater sensor networks (UWSNs) to enhance the network performance. Cooperative diversity has been introduced to combat fading. Cooperative UWSN (Co-UWSN) is proposed, which is a reliable, energy-efficient, and high throughput routing protocol for UWSN. Destination and potential relays are selected that utilize distance and signal-to-noise ratio computation of the channel conditions as cost functions. This contributes to sufficient decrease in path losses occurring in the links and transferring of data with much reduced path loss. Simulation results show that Co-UWSN protocol performs better in terms of end-to-end delay, energy consumption, and network lifetime. Selected protocols for comparison are energy-efficient depth-based routing (EEDBR), improved adaptive mobility of courier nodes in threshold-optimized depth-based routing (iAMCTD), cooperative routing protocol for UWSN, and cooperative partner node selection criteria for cooperative routing Coop (Re and dth).

Delay-Sensitive Routing Schemes for Underwater Acoustic Sensor Networks

Underwater Acoustic Sensor Networks (UASNs) offer their practicable applications in seismic monitoring, sea mine detection, and disaster prevention. In these networks, fundamental difference between operational methodologies of routing schemes arises due to the requirement of time-critical applications; therefore, there is a need for the design of delay-sensitive techniques. In this paper, Delay-Sensitive Depth-Based Routing (DSDBR), Delay-Sensitive Energy Efficient Depth-Based Routing (DSEEDBR), and Delay-Sensitive Adaptive Mobility of Courier nodes in Threshold-optimized Depth-based routing (DSAMCTD) protocols are proposed to empower the depth-based routing schemes. The performance of the proposed schemes is validated in UASNs. All of the three schemes formulate delay-efficient Priority Factors (PF) and Delay-Sensitive Holding time ([Formula: see text]) to minimize end-to-end delay with a small decrease in network throughput. These schemes also employ an optimal weight function ([Formula: see text]) for the computation of transmission loss and speed of received signal. Furthermore, solution for delay lies in efficient data forwarding, minimal relative transmissions in low-depth region, and better forwarder selection. Simulations are performed to assess the proposed protocols and the results indicate that the three schemes largely minimize end-to-end delay along with improving the transmission loss of network.

Improving Both Energy and Time Efficiency of Depth-Based Routing for Underwater Sensor Networks

Underwater Sensor Network (UWSN) is a representative three-dimensional wireless sensor network. Due to the unique characteristics of underwater acoustic communication, providing energy-efficient and low-latency routing protocols for UWSNs is challenging. Major challenges are water currents, limited resources, and long acoustic propagation delay. Network topology of UWSNs is dynamic and complex as sensors have always been moving with currents. Some proposed protocols adopt geographic routing to address this problem, but three-dimensional localization is hard to obtain in underwater environment. As depth-based routing protocol (DBR) uses depth information only which is much more easier to obtain, it is more practical for UWSNs. However, depth information is not enough to restrict packets to be forwarded within a particular area. Packets may be forwarded through multiple paths which might cause energy waste and increase end-to-end delay. In this paper, we introduce underwater time of arrival (ToA) ranging technique to address the problem above. To maintain all the original advantages of DBR, we make the following contributions: energy-efficient depth-based routing protocol that reduces redundancy energy cost in some blind zones; low-latency depth-based routing protocol that is able to deliver a packet through an optimal path. The proposed protocols are validated through extensive simulations.

Forwarding Nodes Constraint based DBR (CDBR) and EEDBR (CEEDBR) in Underwater WSNs

Underwater Sensor Networks (UWSN) has recently become an important field due to the importance of underwater exploration. The unique characteristics of underwater environment make the designing of routing protocol a challenging task. It is difficult to replace the batteries, therefore, it is very important to design a routing protocol that gives maximum network lifetime. Depth Based Routing (DBR) and Energy Efficient Depth Based Routing (EEDBR) are two such routing protocols which give very good performance in underwater environment. In DBR and EEDBR while forwarding the data all the neighboring nodes receive the data. In our work by limiting the number of forwarding nodes, we have extended the network lifetime and energy consumption of DBR and EEDBR. Extensive simulations have been conducted in which show considerable improvement in terms of network lifetime and energy consumption.

Towards Delay-sensitive Routing in Underwater Wireless Sensor Networks

In Underwater Acoustic Sensor Networks (UASNs), fundamental difference between operational methodologies of routing schemes arises due to the requirement of time-critical applications therefore, there is a need for the design of delay-sensitive techniques. In this paper, Delay-Sensitive Depth-Based Routing (DSDBR), Delay-Sensitive Energy Efficient Depth-Based Routing (DSEEDBR) and Delay-Sensitive Adaptive Mobility of Courier nodes in Threshold-optimized Depth-based routing (DSAMCTD) protocols are proposed to empower the depth-based routing schemes. The proposed approaches formulate delay-efficient Priority Factors (PF) and Delay-Sensitive Holding time (DS HT) to minimize end-to-end delay with a small decrease in network throughput. These schemes also employ an optimal weight function WF for the computation of transmission loss and speed of received signal. Furthermore, solution for delay lies in efficient data forwarding, minimal relative transmissions in low-depth region and better forwarder selection. Simulations are performed to assess the proposed protocols and the results indicate that the three schemes largely minimize end-to-end delay of network.

An Energy Efficient Localization-Free Routing Protocol for Underwater Wireless Sensor Networks

Recently, underwater wireless sensor networks (UWSNs) have attracted much research attention from both academia and industry, in order to explore the vast underwater environment. UWSNs have peculiar characteristics; that is, they have large propagation delay, high error rate, low bandwidth, and limited energy. Therefore, designing network/routing protocols for UWSNs is very challenging. Also, in UWSNs, improving the energy efficiency is one of the most important issues since the replacement of the batteries of underwater sensor nodes is very expensive due to the unpleasant underwater environment. In this paper, we therefore propose an energy efficient routing protocol, named (energy-efficient depth-based routing protocol) EEDBR for UWSNs. EEDBR utilizes the depth of sensor nodes for forwarding data packets. Furthermore, the residual energy of sensor nodes is also taken into account in order to improve the network lifetime. Based on the comprehensive simulation using NS2, we observe that EEDBR contributes to the performance improvements in terms of the network lifetime, energy consumption, and end-to-end delay. A previous version of this paper was accepted in AST-2011 conference.