Materials For Energy Conversion Research Articles

Modulating the Doping Effect for Carbon Nanotube-Based Thermoelectric Composites by Radical-Containing Naphthalene Diimides

Modulating the Doping Effect for Carbon Nanotube-Based Thermoelectric Composites by Radical-Containing Naphthalene Diimides

Facile and ecofriendly green synthesis of Co3O4/MgO-SiO2 composites towards efficient asymmetric supercapacitor and oxygen evolution reaction applications.

The development of low-cost, eco-friendly, and earth-friendly electrode materials for energy storage and conversion applications is a highly desirable but challenging task for strengthening the existing renewable energy systems. As part of this study, orange peel extract was utilized to synthesize a magnesium oxide-silicon dioxide hybrid substrate system (MgO-SiO2) for coating cobalt oxide nanostructures (Co3O4) via hydrothermal methods. A variety of MgO-SiO2 compositions were used to produce Co3O4 nanostructures. The purpose of using MgO-SiO2 substrates was to increase the porosity of the final hybrid material and enhance its compatibility with the electrode material. This study investigated the morphology, chemical composition, optical properties, and functional group properties. In hybrid materials, the shape structure is inherited from nanoparticles with uniform size distributions that are well compacted. A relative decrease in the optical band was observed for Co3O4 when deposited onto an MgO-SiO2 substrate. An improvement in the electrochemical properties of Co3O4/MgO-SiO2 composites was observed during the measurements of supercapacitors and oxygen evolution reaction (OER) in alkaline solutions. The Co3O4/MgO-SiO2 composite prepared on 0.4 g of the MgO-SiO2 substrate (sample 2) demonstrated excellent specific capacitance, high energy density, and recycling stability for 40 000 galvanic charge-discharge cycles. The assembled asymmetric supercapacitor (ASC) device demonstrated a specific capacitance of 243.94 F g-1 at a current density of 2 A g-1. Co3O4/MgO-SiO2 composites were found to be highly active towards the OER in 1 M KOH aqueous solution with an overpotential of 340 mV at 10 mA cm-2 and a Tafel slope of 88 mV dc-1. It was found that the stability and durability were highly satisfactory. Based on the use of orange peel extract, a roadmap was developed for the synthesis of porous hybrid substrates for the development of efficient electrode materials for energy storage and conversion.

Molecular Engineering for Future Thermoelectric Materials: The Role of Electrode and Metal Components in Molecular Junctions.

As global temperatures increase due to climate change, the accumulation of excess heat on Earth presents a valuable resource that can be harnessed for electricity generation using thermoelectric materials. However, the intricate structures of bulk thermoelectric materials pose significant challenges to their comprehensive understanding and limit performance. Additionally, their relatively high production costs present practical obstacles. A promising solution to these issues lies in molecular control and the use of molecular junctions. Molecules are predicted to surpass the performance of existing bulk materials in energy conversion because they can be chemically tuned to achieve high thermoelectric efficiencies. This review identifies the thermoelectric parameters that affect the performance of molecular junctions. It also explores various experimental platforms for measuring thermoelectric performance from single molecules to assemblies of hundreds of molecules. Finally, it highlights recent advancements in thermoelectric molecular junctions, focusing on the crucial roles of electrodes and metal components within the molecules, such as Ru complexes, metalloporphyrins, metallocenes, conjugated silane wires, and endohedral metallofullerenes. Ultimately, our review provides a comprehensive analysis of strategies to enhance the thermoelectric efficiency of molecular junctions.

Ligand-assisted synthesis of novel π-SnS tetrahedrons for enhanced photocatalytic H2 evolution from water

Tin sulfide (SnS) is a potentially promising chalcogenide material for efficient solar energy conversion. In this study, pure π-SnS particles with a novel cubic phase were successfully synthesized by a simple one-pot solvothermal reaction method. The effects of solvothermal reaction time and amount of the ligand, hexamethyldisilazane (HMDS), on physical and photocatalytic properties were investigated. Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and X-ray diffraction revealed that the obtained π-SnS consisted of tetrahedral particles with a high degree of crystallinity and exhibited a cubic phase. UV-Vis transmission spectra and photoluminescence (PL) revealed that the bandgap of π-SnS particles was about 1.62 eV. Importantly, the H2 evolution capacity of π-SnS particles prepared with Tin-HMDS complexes was dramatically improved. About 12-fold and 23-fold larger amounts of H2 were produced than the amounts produced by π-SnS particles prepared without HMDS and α-SnS particles with similar size, respectively. Post-annealing treatment further confirmed the existence of surface ligands and their importance for the photocatalytic activity of particles. X-ray photoelectron spectroscopy (XPS) revealed HMDS ligands instead of oleylamine molecules interacted with π-SnS particles.

T-Shaped-N-Doped Polycyclic Aromatic Hydrocarbons: A New Concept of Dopant-Free Organic Hole-Transporting Materials for Perovskite Solar Cells.

Although metal halide perovskites are positioned as the most powerful light-harvesting materials for sustainable energy conversion, there is a need for a thorough understanding of molecular design principles that would guide better engineering of organic hole-transporting materials, which are vital for boosting the performance and stability of perovskite solar cells. To address this formidable challenge, here, we developed a new design strategy based on the curved N-doped polycyclic aromatic hydrocarbon merged with T-shaped phenazines being decorated with (phenyl)-di-p-methoxyphenylamine (OMeTAD)─N-PAH23/24 and -3,6-ditertbutyl carbazole (TBCz)─N-PAH25/26. As N-PAH23/24 exhibited satisfying thermal stability, the comparative studies performed with various experimental and simulation methods revealed a pronounced correlation between the depth of the central cyclazine core and the form of the T-shape units. This proved to be a crucial factor in controlling their π-π intermolecular interaction as well as self-assembly behavior with the perovskite layer, leading to enhanced humidity resistance, operational stability, and a maximum power conversion efficiency of 20.39% denoted for N-PAH23, which is superior to the benchmarked device with doped spiro-OMeTAD (19.23%). These studies not only resulted in optimized stability and device performance but also opened a conceptually new chemical space in the photovoltaic technology.

Molecular ladder polymer network enables scalable and robust solar water oxidation

Organic polymers with tunable band structures and light absorption properties offer a versatile alternative to inorganic materials for solar energy conversion. However, advancing organic polymers for efficient solar water oxidation has been hindered by challenges in charge separation and transport. Here we develop a molecular strategy to achieve an apparent quantum yield of 22 % for solar water oxidation by using a ladder polymer network coupled with a FeNi catalyst. Solar irradiation of the photocatalytic network produces high-flux excited states capable for catalyst activation, generating persistent charge-separated states available for water oxidation. The network exhibits high robustness during 125-hour solar water oxidation, showing negligible decrease in the photocatalytic activity. Owing to improved charge transport, the photocatalytic network is scaled up from 1.0 cm2 to 25 cm2 without sacrificing the quantum efficiency. Our findings herald the potential of ladder polymer networks toward scalable manufacturing of high-efficiency and cost-effective organic photocatalysts.

Research Progress of Cobalt-Based Metal Organic Frameworks and Their Derivatives in Energy Storage and Conversion.

With the rapid development of modern society, the efficient development and utilization of new energy have become more and more important. The development of high-performance energy storage and conversion devices has a decisive impact on the sustainable and efficient use of energy. In the foreseeable future, the exploration of high-quality functional materials for energy storage and conversion will continue to be the main goal pursued by the scientific and application fields. Metal organic frameworks (MOFs) have the merits of adjustable porosity and a stable structure. Moreover, the metal elements in the MOFs could play a role as active sites during the electrochemical process. Thus, various kinds of MOFs and their derivatives have been prepared and used as functional materials for energy storage and conversion. In this work, the applications and potentials of cobalt-based MOFs (Co-MOFs) and their derivatives in supercapacitors, advanced batteries, and electrochemical catalysts have been reviewed and summarized. The electrochemical properties, energy storage and conversion mechanisms, and the effects on performance were described in depth. A large number of Co-MOFs with unique structures, as well as numerous Co-MOF derivatives and composites, have been developed, and excellent application performance has been achieved, which have already become some of the most advantageous functional materials in the energy storage and conversion field. In addition, the current research status, difficulties, and prospects of Co-based MOFs and their derivatives as energy storage and conversion functional materials were comprehensively summarized at the end of this study.

Pomegranate-like cobalt Phosphides@P-Doped carbon Nanostructures with controlled phase as anode materials for Lithium-Ion batteries

Transition metal phosphides (TMPs) have recently emerged as prominent energy conversion and storage materials owing to their unique physicochemical property. Nevertheless, it’s still a difficult task to obtain phase-control of TMPs owing to multiple energetically favorable stoichiometries. Herein, a phase-controllable cobalt phosphide@C with the pomegranate core–shell structure are successfully realized by employing Co-glycerate as precursors and phytic acid (PA) as P sources, etching and coordination agents. With the presence of six phosphoryl groups and the strong coordination ability, PA allows the self-phosphating of Co atoms and the P-doped carbon shell, as well as the confinement of the obtained nanoparticles Additionally, as an organic acid, PA can etch the Co-glycerate precursors with the formation of hollow structures. With different etching time, metal-rich phosphides Co2P@C and monophosphides CoP@C are successfully achieved. When applied as anode materials, CoP@C demonstrates superior lithium storage performance by delivering a prominent reversible capacity up to 1187 mAh/g at 0.1 A/g and shows no capacity loss at 1 A/g after 500 cycles. This work presents a simple protocol to obtain TMPs with tunable metal/phosphorus ratios, phase selectivity and interface engineering, which could be applied in the field of energy storage and electrocatalysis.

Exploring structural basis of photovoltaic dye materials to tune power conversion efficiencies: A DFT and ML analysis of Violanthrone

This study employs a systematic approach to modify Violanthrone (V) structures and analyze their impact on photovoltaic (PV) properties. We use cheminformatics based Python library based RDKit tool to calculate their structural descriptors for to correlate them with their PV parameters. Our analysis reveals a positive correlation for their Open-Circuit Voltage (Voc) and Fill Factor (FF) for indicating that their higher voltage output is associated for their efficient charge carrier mobilities. We also predict their Power Conversion Efficiency (PCE) by drawing their their Scharber diagram which achieves their promising efficiency of up to 15 %. To further enhance the reliability our work, we conduct an extensive literature survey of such organic materials to predict their PCEs by their Machine Learning (ML) after utilizing various ML models. Among five tested ML models, it identifies the Random Forecast (RF) model and Gradient Boosting (GB) models as as the optimal one (R-squared value: 0.82). Their feature importance reveals that their FF is the most significant feature to impact their PCEs (importance value: 10.9). Furthermore, we observe a negative correlation between orbital interaction strength (E(2)) values and orbital energy differences E(j)-E(i) which indicates that their stronger orbital interactions are associated with their smaller energy differences. Our study provides valuable insights for their structural basis to PV material designs for enabling their design for efficient materials in energy conversion.

Melanin and Light.

Melanin is responsible, in Nature, for photoprotection, for this reason it is expected to be poorly photoreactive. However, the photo-reactivity of melanin and related materials is well documented. Here we discuss some relevant recent examples to demonstrate that, indeed, the actual mechanism of interaction of melanin with light is complex and still not completely understood. Photochemical and photothermal processes are involved, giving a contribution that strongly depends on light wavelength and intensity. Moreover, some interesting experiments demonstrated that photochemical reactivity of melanin related compounds is likely to be indirect, in the sense that the effect of light is to increase the number of radical species rather than creating photoreactive excited state. These suggestions open-up new perspectives in the interpretation of the role of melanin in photoprotection and in the design of new melanin based photoactive materials for energy conversion, environmental remediation, and nanomedicine. Further complication is given by the role of atmospheric oxygen and humidity in the photoinduced processes. Beside this complexity of behavior makes it difficult a systematic understanding of the interaction of melanin with light, it surely strongly contributes to make the properties of melanin and related materials unique.

Mechanically Exfoliated InP Thin Films for Solar Energy Conversion Devices

III‐V semiconductors are favoured photo absorber materials for solar energy conversion due to their ideal bandgap, yet their high‐cost hinders widespread adoption. Utilizing thin films of these semiconductors presents a viable way to address the cost‐related challenges. Here, a novel mechanical exfoliation technique is demonstrated, also known as controlled spalling, as a cost‐effective and facile way to obtain thin films of III‐V semiconductors. As a proof of concept, 15 μm thick InP films are successfully exfoliated from their original wafers. Thorough characterization using cathodoluminescence and photoluminescence spectroscopy confirms that the opto‐electronic properties of the exfoliated InP films remain unaffected. Utilizing these InP thin films, InP thin‐film heterojunction solar cells with efficiencies exceeding 13% are demonstrated. Additionally, InP photoanodes are fabricated by integrating NiFeOOH catalyst onto these InP thin‐film solar cells, achieving an impressive photocurrent density of 19.3 mA cm−2 at 1.23 V versus reversible hydrogen electrode, along with an applied bias photon‐to‐current efficiency of ≈4%. Overall, this study showcases the efficacy of controlled spalling in advancing economically viable and efficient III‐V semiconductor‐based solar energy conversion devices.

Nanoscale engineering of semiconductor photocatalysts boosting charge separation for solar-driven H2 production: Recent advances and future perspective

Abstract Photocatalytic hydrogen (H₂) production is regarded as an efficient method for generating renewable energy. Despite recent advancements in photocatalytic water splitting, the solar-to-hydrogen conversion efficiency of photocatalysts remains well below the 10% target needed for commercial viability due to ongoing scientific challenges. This review comprehensively analyzes recent advancements in nanoscale engineering of photocatalytic materials, emphasizing techniques to enhance photogenerated charge separation for efficient solar hydrogen production. Here we highlight the nanoscale engineering strategies for effective charge separation including crystal engineering, junction engineering, doping-induced charge separation, tailoring optoelectronic properties, hierarchical architecture, defects engineering, various types of heterojunctions, and polarity-induced charge separation, and discuss their unique properties including ferroelectric on spatial charge separation along with the fundamental principles of light-induced charge separation/transfer mechanisms, and the techniques for investigation. This study, critically assesses strategies for effective photogenerated charge separation to enhance photocatalytic hydrogen production and offers guidance for future research to design efficient energy materials for solar energy conversion.

Surface Corrosion‐Resistant and Multi‐Scenario MoNiP Electrode for Efficient Industrial‐Scale Seawater Splitting

AbstractThe construction of efficient and durable multifunctional electrodes for industrial‐scale hydrogen production presents a main challenge. Herein, molybdenum‐modulated phosphorus‐based catalytic electrodes (Mo‐NiP@NF) are prepared via mild electroless plating. Heteroatoms doping or heterostructures construction can reconfigure the intrinsic electronic structure of the pre‐catalyst and optimizes the key intermediates adsorption. Moreover, the (hypo/meta‐)phosphite anions (POxδ−) and molybdate ions (MoOxδ−) on the electrode surface of Mo‐NiP@NF afford resistance to chloride (Cl−) corrosion. Mo‐NiP@NF exhibits ultralow overpotentials of 278/550 and 282/590 mV at 1 A cm−2 during the hydrogen/oxygen evolution reaction (HER/OER) in alkaline simulated and real seawater, respectively, whereas catalytic overall seawater splitting (OWS) reach 1 A cm−2 at 1.96 and 1.97 Vcell. Remarkably, Mo‐NiP@NF maintains stable operation for 1500 h in OWS. The scalability of Mo‐NiP@NF allowing the assembly of proton exchange membrane (PEM) electrolyzer powered by photovoltaic energy, simulating a portable hydrogen‐oxygen respirator provides an oxygen/hydrogen flows of 160/320 mL min−1. Expanding further, the trace ruthenium‐loaded Mo‐NiP@NF catalyst sodium borohydride (NaBH4) hydrolysis achieving a hydrogen generation rate (HGR) of 11049.2 mL min−1 g−1. This work provides strategic innovations and optimization solutions for the economical and mild construction of multi‐scenario durable green energy conversion materials at industrial‐scale application.

Structural, electronic, optical and thermoelectric properties of FrSnI3-xClx (X=0, 1, 2, 3) perovskites using the TB-mBJ approach

Mixed halide inorganic perovskites represent a significant advance in energy conversion materials, with research on these materials paving the way for more sustainable and accessible energy solutions. In this work we investigated the effects of chlorine atom substitution on the structural, electronic, optical and thermoelectric properties of mixed halide perovskites FrSnI3-xClx (x = 0, 1, 2, 3). The FP-LAPW approach within the Wien2k package has been employed, using the modified Becke-Johnson potential (TB-mBJ) for the exchange correlation functionals. For FrSnI3 and FrSnCl3 the calculated lattice parameters are in good agreement with theoretical results.The formation energies calculated for FrSnI3-xClx (x = 0, 1, 2, 3) confirm the thermodynamic stability of all these materials. Analysis of the electronic properties, including partial density of states (PDOS), total density of states (TDOS) and band structures, indicates that these materials exhibit p-type semiconductor behaviour with direct band gaps ranging from 1.169 to 1.953 eV In terms of optical properties, the FrSnI3-xClx compounds exhibit high optical absorption (α(ω) > 104 cm−1) in the visible region. The broad absorption range extends from visible to ultraviolet energy. The low reflectivity values observed (below 30 %) and their minimal energy loss suggest potential applications in optoelectronic devices. The thermoelectric properties of these materials were also studied over a temperature range of 100 to 950 K. They exhibit high Seebeck coefficients, high electrical conductivity, and low thermal conductivity. Notably, at room temperature, FrSnI2Cl and FrSnICl2 show the highest figures of merit, reaching 1.31 and 0.61, respectively, demonstrating their high efficiency for thermoelectric devices

Kinetic analysis of the self-discharge of the NiOOH OER active phase in KOH electrolyte: insights from in-situ Raman and UV–Vis reflectance spectroscopies

NiOOH has been established as the active phase of NiO-based electrocatalysts in the alkaline Oxygen Evolution Reaction (OER). Here, we investigate the self-discharge behavior of NiOOH electrodes under open circuit potential (OCP) conditions in 1 M KOH electrolyte by monitoring phase changes via in-situ Raman and UV–Vis reflectance spectroscopies and performing kinetic analyses on the OCP and spectroscopic data. Our findings reveal a linear phase change from NiOOH to Ni(OH)2 over time, indicative of a 0th-order reduction reaction. Contrarily, the OCP evolution associated with this phase reduction displayed a combination of linear and exponential decay patterns as a result of various kinetics, including Faradaic processes and diffusion-controlled mechanisms, influencing the self-discharge potential over 1.25 V (vs RHE). An additional linear region at lower potentials (<1.25 V (vs RHE)) suggests that charge redistribution due to the phase change from α-Ni(OH)2 to β-Ni(OH)2 dominates the self-discharge, a behavior confirmed by in-situ UV–Vis reflectance spectroscopy. These findings highlight the effectiveness of combining in-situ Raman and UV–Vis spectroscopy with electrochemical data for real-time monitoring of electrochemical processes, here potential-dependent electrocatalyst phase changes, leading to a more detailed and accurate understanding of the dynamic behavior, phase change kinetics, and self-discharge behaviors of solid electrocatalysts that can guide the design of more efficient and durable energy storage and conversion materials.

Redox-mediated synthesis of Cu2O/CuO/Mn3O4/C quaternary nanocomposites as an efficient electrode material for oxygen reduction reaction and supercapacitor application

Earth-abundant transition metal oxides (TMOs) hold significant promise as electroactive materials in various electrochemical energy conversion and storage applications, offering economic and environmental advantages over their less abundant counterparts. In this work, a simple and cost-effective redox-mediated reaction strategy under hydrothermal conditions has been adopted to synthesize the quaternary nanocomposites Cu2O/CuO/Mn3O4/C with variable amounts of carbon. The synthesized nanocomposites have been characterized using various analysis techniques, including powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Brunauer–Emmett–Teller (BET). The synthesized COM5 nanocomposite (Cu2O/CuO/Mn3O4/C-50), when used as an electrocatalyst for the oxygen reduction reaction (ORR), demonstrates a good limiting current density (JL), half-wave potential (E1/2), and onset potential (Eonset) of −5.50 mA/cm2, 0.75 V, and 0.95 V, respectively, as per the polarization curve. The COM5 nanocomposite exhibits a four-electron transfer mechanism, calculated using the Koutecky-Levich (K-L) equation. In an O2-saturated 0.1M KOH solution, the COM5 nanocomposite has shown a superior relative current durability of 84.46% over 14,000 s compared to the commercially available 10 wt% Pt/C, indicating its potential application in the ORR. However, for supercapacitor applications, the COM3 nanocomposite (Cu2O/CuO/Mn3O4/C-20) as active electrode material in galvanic charge-discharge (GCD) study shows superior performance (201 F/g at 1 A/g) compared to the COM2 nanocomposite (117 F/g at 1 A/g) in neutral aqueous electrolyte, possibly due to the lower charge transfer resistance (Rct) of 24.04 Ω compared to COM2 (34.63 Ω). In two-electrode studies, the COM3 nanocomposite exhibits a good energy density of 24.19 Wh/kg at 1 A/g and a 4.7 kW/kg power density at 5 A/g. Additionally, the COM3 nanocomposite shows excellent long-term durability (74% capacitance retention) at the current density of 5 A/g for 8000 cycles. The electrochemical findings indicate that the COM3 nanocomposite stands out as a superior electrode material for supercapacitors, while the COM5 nanocomposite proves to be an effective electrocatalyst for the oxygen reduction reaction.

A facile synthesis of N-doped carbon encapsulated multimetallic carbonitride as a robust electrocatalyst for oxygen evolution reaction

Electrocatalytic water splitting is a promising solution for generating clean hydrogen. Transition metal compounds are among the most extensively investigated catalysts developed to date for water oxidation in alkaline media, a process also known as the oxygen evolution reaction (OER). However, the application of these catalysts was constrained by insufficient stability arising from surface oxidation and metal dissolution under high OER potential. In this work, we developed a facile approach using urea-based gel as the precursor of preparing a series of multimetallic carbonitride particles which were encapsulated by N-doped carbon (NC). In particular, (MoCoFeNiZr)CN@NC core–shell structure delivered a low overpotential of 246 mV at a current density of 10 mA cm−2 in 1 M KOH during OER. Importantly, operando differential electrochemical mass spectrometry (DEMS), together with multiple microscopic and spectroscopic analyses, indicated that the NC shells effectively maintained the crystalline stability of carbonitride via suppressing the surface reconstruction during catalysis. The highly graphitic NC also demonstrates excellent stability against oxidation. This work shows a promising strategy of stabilizing electrocatalyst at high anodic potential, paving the way for the development of robust electrode materials for energy conversion.

α-Bi2Mo3O12: A Dual-Functional Material for Electrocatalytic Water Splitting and Supercapacitor Applications.

This study explores the functionality of α-Bi2Mo3O12 (BMO) as an electrocatalyst for water splitting and its suitability for supercapacitor applications. BMO was synthesized by the solvothermal method and characterized in pre-calcination [BMO (BC)], post-calcination [BMO (AC)], and base-etched forms [BMO (BE)]. Structural analysis confirmed the formation of α-Bi2Mo3O12 with well-defined crystallographic planes. Electrochemical analysis revealed that BMO (AC) exhibited the lowest overpotential for hydrogen evolution reactions (HER) and BMO (BC) exhibited the lowest overpotential for oxygen evolution reactions (OER), indicating its superior electrocatalytic activity. The Tafel slope and electrochemical impedance spectroscopy results confirmed the superior kinetics and charge transfer properties of BMO material. Furthermore, BMO samples demonstrated excellent stability during prolonged chronoamperometry (CA) testing for 12 h. For supercapacitor performances, the BMO (BE) exhibits a superior specific capacitance value of 398 F/g at 2.0 A/g. Thus, the BMO material delivers prominent electrocatalytic activity as well as supercapacitor performance. Overall, this study demonstrates the potentiality of α-Bi2Mo3O12 in different forms as a dual-functional material for efficient energy storage and conversion.

Vertically Fluorinated Graphene Encapsulated SiOx Anode for Enhanced Li+ Transport and Interfacial Stability in High-Energy-Density Lithium Batteries.

Achieving high energy density has always been the goal of lithium-ion batteries (LIBs). SiOx has emerged as a compelling candidate for use as a negative electrode material due to its remarkable capacity. However, the huge volume expansion and the unstable electrode interface during (de)lithiation, hinder its further development. Herein, we report a facile strategy for the synthesis of surface fluorinated SiOx (SiOx@vG-F), and investigate their influences on battery performance. Systematic experiments investigations indicate that the reaction between Li+ and fluorine groups promotes the in situ formation of stable LiF-rich solid electrolyte interface (SEI) on the surface of SiOx@vG-F anode, which effectively suppresses the pulverization of microsized SiOx particles during the charge and discharge cycle. As a result, the SiOx@vG-F enabled a higher capacity retention of 86.4 % over 200 cycles at 1.0 C in the SiOx@vG-F||LiNi0.8Co0.1Mn0.1O2 full cell. This approach will provide insights for the advancement of alternative electrode materials in diverse energy conversion and storage systems.

The Construction of Face-to-Face Combination between NiFe-layered Double Hydroxide Nanosheets and Monolayer rGO for Efficient Water Splitting and Oxygen Reduction.

Developing cost-effective and efficient electrocatalysts is essential for advancing a green energy future. Herein, a NiFe-layered double hydroxide loaded on reduced graphene oxide (NiFe-LDHs@rGO) hybrid was synthesized using a straightforward three-step process involving exfoliation tearing, electrostatic self-assembly, and chemical reduction. The face-to-face packing and ultrathin exfoliation enable strong heterogeneous interactions, fully harnessing the potential of these complementary two-dimensional counterparts. Consequently, the resultant catalyst displays outstanding oxygen evolution reaction (OER) catalytic activity and stability, whose overpotential is as low as 241 mV at 30 mA cm-2 and 255 mV at 50 mA cm-2 with a low Tafel slope of 62.1 mV dec-1. Both the experimental results and density functional theory (DFT) calculations reveal that the face-to-face assembly strengthens the electronic interactions between NiFe-LDHs and rGO, which effectively modulates the d-band center of Ni and Fesites and improves the reaction kinetics for OER. Moreover, the resultant NiFe-LDHs@rGO hybrids exhibit excellent multifunctional catalytic performance. Its hydrogen evolution reaction (HER) activity is endowed by Fe-site of NiFe-LDHs and defect states rGO and achieves a low voltage of 1.68 V to drive a current density of 10 mA cm-2 for overall water splitting. The face-to-face heteroassembly also imparts NiFe-LDHs@rGO with superior oxygen reduction reaction (ORR) activity, with a half-wave potential of 0.70 V and a limiting current density of 4.2 mA cm-2. Its ORR primarily follows a four-electron transfer pathway with a minor contribution from a two-electron process. This study establishes the groundwork for optimizing two-dimensional heterogeneous interfaces in LDH@carbon-based materials for advanced energy conversion.