Endothelial Cell Spreading Research Articles

Human Salivary Histatin-1 Is More Efficacious in Promoting Acute Skin Wound Healing Than Acellular Dermal Matrix Paste.

A rapid wound healing is beneficial for not only recovering esthetics but also reducing pain, complications and healthcare burdens. For such a purpose, continuous efforts have been taken to develop viable dressing material. Acellular dermal matrix (ADM) paste has been used to repair burn wounds and is shown to promote angiogenesis as well as fibroblast attachment and migration. However, its efficacy still needs to be significantly improved to meet clinical demands for accelerating acute skin wound healing. To approach this problem, we studied the added value of a human salivary peptide — Histatin 1 (Hst1). Hst1 was chosen because of its potency to promote the adhesion, spreading, migration, metabolic activity and cell-cell junction of major skin cells and endothelial cells. In this study, we hypothesized that ADM paste and Hst1 showed a better effect on the healing of surgically created acute skin wounds in mice since ADM paste may act as a slow release system for Hst1. Our results showed that the healing efficacy of 10 μM topically administrated Hst1 was significantly higher compared to the control (no Hst1, no ADM) from day 3 to day 10 post-surgery. In contrast, ADM alone failed in our system at all time points. Also, the combination of ADM paste and Hst1 did not show a better effect on percentage of wound healing. Histological analysis showed that 10 μM Hst1 was associated with maximal thickness of newly formed epidermal layer on day 7 as well as the largest collagen area on day 14. In addition, immunohistochemical staining showed that the number of CD31-positive blood vessels in the group of 10 μM Hst1 was 2.3 times compared to the control. The vascular endothelial growth factor (VEGF) expression in the groups of 10 μM Hst1 group and ADM + 10 μM Hst1 group was significantly higher compared with the control group. Furthermore, 10 μM Hst1 group was associated with significantly lower levels of CD68-positive macrophage number, interleukin-1β (IL-1β) expression and C-reactive protein (CRP) expression than those of the other groups (control, ADM alone and ADM + 10 μM Hst1). In contrast, ADM was only associated with significantly lower CD68-positive macrophage number and IL-1β expression in comparison with the control. The co-administration of Hst1 and ADM paste did not yield more beneficial effects than Hst1 alone. In conclusion, the topically administrated of 10 μM Hst1 could be a promising alternative dressing in managing acute wound healing.

Developing an Injectable Nanofibrous Extracellular Matrix Hydrogel With an Integrin αvβ3 Ligand to Improve Endothelial Cell Survival, Engraftment and Vascularization.

Endothelial cell (EC) transplantation via injectable collagen hydrogel has received much attention as a potential treatment for various vascular diseases. However, the therapeutic effect of transplanted ECs is limited by their poor viability, which partially occurs as a result of cellular apoptosis triggered by the insufficient cell-extracellular matrix (ECM) engagement. Integrin binding to the ECM is crucial for cell anchorage to the surrounding matrix, cell spreading and migration, and further activation of intracellular signaling pathways. Although collagen contains several different types of integrin binding sites, it still lacks sufficient specific binding sites for ECs. Previously, using one-bead one-compound (OBOC) combinatorial technology, we identified LXW7, an integrin αvβ3 ligand, which possessed a strong binding affinity to and enhanced functionality of ECs. In this study, to improve the EC-matrix interaction, we developed an approach to molecularly conjugate LXW7 to the collagen backbone, via a collagen binding peptide SILY, in order to increase EC specific integrin binding sites on the collagen hydrogel. Results showed that in the in vitro 2-dimensional (2D) culture model, the LXW7-treated collagen surface significantly improved EC attachment and survival and decreased caspase 3 activity in an ischemic-mimicking environment. In the in vitro 3-dimensional (3D) culture model, LXW7-modified collagen hydrogel significantly improved EC spreading, proliferation, and survival. In a mouse subcutaneous implantation model, LXW7-modified collagen hydrogel improved the engraftment of transplanted ECs and supported ECs to form vascular network structures. Therefore, LXW7-functionalized collagen hydrogel has shown promising potential to improve vascularization in tissue regeneration and may be used as a novel tool for EC delivery and the treatment of vascular diseases.

Covalent Self-Assembly of PEG and Heparin Improves Biological Performance of Electrospun Vascular Grafts for Carotid Artery Replacement

Rapid endothelialization of small-diameter vascular grafts remains a significant challenge in clinical practice. In addition, compliance mismatch causes intimal hyperplasia and finally leads to graft failure. To achieve compliance match and rapid endothelialization, we synthesized low-initial-modulus poly(ester-urethane)urea (PEUU) elastomer and prepared it into electrospun tubular grafts and then functionalized the grafts with poly(ethylene glycol) (PEG) and heparin via covalent self-assembly. The PEG- and heparin-functionalized PEUU (PEUU@PEG-Hep) graft had comparable mechanical properties with the native blood vessel. In vitro data demonstrated that the grafts are of great cytocompatibility and blood compatibility. Covalent self-assembly of PEG and heparin significantly promoted the adhesion, spreading, and proliferation of human umbilical vein endothelial cells (HUVECs) and upregulated the expression of vascular endothelial cell-related genes, as well as increased the capability of grafts in preventing platelet deposition. In vivo assessments indicated good biocompatibility of the PEUU@PEG-Hep graft as it did not induce severe immune responses. Replacement of resected carotid artery with the PEUU@PEG-Hep graft in a rabbit model showed that the graft was capable of rapid endothelialization, initiated vascular remodeling, and maintained patency. This study demonstrates the synergistic effects of compliance match and efficacious antithrombosis of synthetic grafts for blood vessel regeneration.

Long-Term Evaluation of Dip-Coated PCL-Blend-PEG Coatings in Simulated Conditions.

Our study focused on the long-term degradation under simulated conditions of coatings based on different compositions of polycaprolactone-polyethylene glycol blends (PCL-blend-PEG), fabricated for titanium implants by a dip-coating technique. The degradation behavior of polymeric coatings was evaluated by polymer mass loss measurements of the PCL-blend-PEG during immersion in SBF up to 16 weeks and correlated with those yielded from electrochemical experiments. The results are thoroughly supported by extensive compositional and surface analyses (FTIR, GIXRD, SEM, and wettability investigations). We found that the degradation behavior of PCL-blend-PEG coatings is governed by the properties of the main polymer constituents: the PEG solubilizes fast, immediately after the immersion, while the PCL degrades slowly over the whole period of time. Furthermore, the results evidence that the alteration of blend coatings is strongly enhanced by the increase in PEG content. The biological assessment unveiled the beneficial influence of PCL-blend-PEG coatings for the adhesion and spreading of both human-derived mesenchymal stem cells and endothelial cells.

Decreased Jagged1 expression in vascular smooth muscle cells delays endothelial regeneration in arteriovenous graft.

It is well-established that endothelial dysfunction promotes activation of vascular smooth muscle cell (VSMC). Whether decreased accumulation of VSMCs affects endothelial regeneration and functions in arteriovenous graft (AVG) remodelling has not been studied. We sought to identify mechanisms by which the Notch ligand, Jagged1, in VSMCs regulates endothelial cell (EC) functions in AVGs. AVGs were created in transgenic mice bearing VSMC-specific knockout (KO) or overexpression of Jagged1. VSMC migration, EC regeneration, and its barrier functions as well as AVG remodelling were evaluated. Jagged1 expression was induced in VSMCs of neointima in the AVGs. Jagged1 KO in VSMCs inhibited the accumulation of extracellular matrix as well as VSMC migration. Fewer α-SMA-positive VSMCs were found in AVGs created in VSMC-specific Jagged1 KO mice (VSMCJagged1 KO mice) vs. in WT mice. Decreased VSMCs in AVGs were associated with deterioration of EC functions. In AVGs created in transgenic mice bearing Jagged1 KO in VSMCs exhibited delayed EC regeneration and impaired EC barrier function. Barrier dysfunction of ECs increased inflammatory cell infiltration and dysregulation of AVG remodelling and arterialization. The increased expression of IL-1β in macrophages was associated with expression of adhesion markers in ECs in AVGs created in VSMCJagged1 KO mice. In contrast, AVGs created in mice with overexpression of Jagged1 in VSMCs exhibited improved EC regeneration plus decreased macrophage infiltration. This led to AVG remodelling and arterialization. In co-cultures of ECs and VSMCs, Jagged1 deficiency in VSMCs suppressed N-cadherin and integrin β3 expression in ECs. Inhibition of integrin β3 activation delayed EC spreading and migration. Notably, Jagged1 overexpression in VSMCs or treatment with recombinant Jagged1 stimulated the expression of N-cadherin and integrin β3 in ECs. Jagged1-induced responses were blocked by inhibition of Notch signalling. Jagged1 expression in VSMCs maintains EC barrier functions and blocks infiltration of macrophages. These responses promote remodelling and arterialization of AVGs.

PLLA/POSS Nanofibers Loaded with Multitargeted pANG Composite Nanoparticles for Promotion of Vascularization in Shear Flow

In vitro prevascularization is particularly important for the clinical application of tissue engineering scaffolds that require vascularization. The principal challenge is simulating the dynamic in vivo environment to promote the continuous growth of blood vessels. In this study, two targeting polypeptides are linked to the two ends of an amphiphilic block copolymer, polyethyleneimine-b-poly(lactide-co-3(S)-methyl-morpholine-2,5-dione)-b-polyethyleneimine (PEI-PLMD-PEI), and self-assembled to form positively charged nanoparticles (NPs), which can bind to negatively charged pANG through electrostatic interactions; the polypeptides are finally loaded into PLLA/polyhedral oligomeric silsesquioxane (POSS) porous fibers to prepare untargeted nanofibers (unTFs), targeted porous nanofibers (TFBs), and targeted nanofiber bundles. The effects of the porous nanofibers on human umbilical vein endothelial cell (HUVEC) transfection, spreading, proliferation, morphology, and expression of related factors are investigated under the action of shear flow force. The results show that the PLLA/POSS nanofibers can maintain stable release of multitargeted NPs for nearly 45 days. Both the dual-targeted porous NPs and shear flow improve the pANG transfection efficiency and promote cell proliferation, and they have a good synergistic effect. These results provide a potential strategy for designing HUVEC-specific gene carriers and using shear flow to enhance endothelialization.

Enhanced endothelial cell activity induced by incorporation of nano-thick tantalum layer in artificial vascular grafts

Expanded polytetrafluoroethylene (ePTFE) has been successfully used as an artificial vascular graft material owing to its unique merits of fibrous structure, chemical stability, physical robustness, and nontoxicity. However, its insufficient endothelial cell affinity arising from its highly hydrophobic surface nature induces early thrombus formation and development of neointimal hyperplasia, leading to poor long-term patency rates. In this study, we demonstrate a novel rapid surface modification technique, termed as sputtering-based plasma immersion ion implantation (S-PIII), to elicit favorable vascular responses on the ePTFE surface. This technique enables rapid ion implantation of biologically compatible tantalum (Ta) into ePTFE surfaces, generating a nano-thick Ta-rich surface layer (<30 at.%) without any structural defects or loss of ePTFE’s fibrous morphology. Surface properties of ePTFE, such as its biologically inert chemical structure and strong hydrophobicity, are ameliorated considerably after the S-PIII treatment, which is more favorable for endothelial cell (EC) adherence, spreading, and proliferation. In particular, compared to a bare ePTFE surface, Ta-implanted ePTFE possesses an antithrombogenic property, suppressing platelet adhesion and activation on its surface. From an in vivo pilot study with a canine aortic bypass model, Ta-implanted ePTFE demonstrates substantially suppressed early thrombosis with rapid formation of EC monolayers covering the luminal surface.

Cu and Si co-doped microporous TiO2 coating for osseointegration by the coordinated stimulus action

Biocompatible implant materials with enhanced antibacterial activity, osteogenic and angiogenic capacity are beneficial to osseointegration. Based on the outstanding antimicrobial activity of copper (Cu) and bone-related element silicon (Si), the microporous TiO2 coatings (M-Ti) doped with Cu2+ (M-Cu) and different doses of Si2+ (M-CuSi) were directly fabricated via the simple one-step micro-arc oxidation (MAO). M-Cu causes obvious toxicity towards osteoblasts (OBs) and endothelial cells (ECs) while maintaining excellent antimicrobial activity. By doping Si, it is able to compensate the cytotoxicity of Cu and simultaneously further enhance the activity of OBs and ECs by the synergic stimulatory effects with Cu2+, thus forming a balance between the antibacterial property and biocompatibility. In vitro experiments indicated that the M-CuSi5 coating not only shows good antibacterial properties towards Staphylococcus aureus (S. aureus), but also promotes attachment, spreading, proliferation and differentiation of both OBs and ECs. The most suitable release amount of Cu2+ and Si2+ from M-CuSi5 coating can cause distinctly synergistic stimulatory effects on osteogenesis and angiogenesis by facilitating the osteogenic-related genes and angiogenic-related genes expression. In vivo Micro-CT evaluation and histological observations further mirror that the M-CuSi5 coating results in ameliorative osseointegration, thus being attractive candidate as the bone implant material.

Molecular underpinnings of integrin binding to collagen-mimetic peptides containing vascular Ehlers–Danlos syndrome–associated substitutions

Collagens carry out critical extracellular matrix (ECM) functions by interacting with numerous cell receptors and ECM components. Single glycine substitutions in collagen III, which predominates in vascular walls, result in vascular Ehlers-Danlos syndrome (vEDS), leading to arterial, uterine, and intestinal rupture and an average life expectancy of <50 years. Collagen interactions with integrin α2β1 are vital for platelet adhesion and activation; however, how these interactions are impacted by vEDS-associated mutations and by specific amino acid substitutions is unclear. Here, we designed collagen-mimetic peptides (CMPs) with previously reported Gly → Xaa (Xaa = Ala, Arg, or Val) vEDS substitutions within a high-affinity integrin α2β1-binding motif, GROGER. We used these peptides to investigate, at atomic-level resolution, how these amino acid substitutions affect the collagen III-integrin α2β1 interaction. Using a multitiered approach combining biological adhesion assays, CD, NMR, and molecular dynamics (MD) simulations, we found that these substitutions differentially impede human mesenchymal stem cell spreading and integrin α2-inserted (α2I) domain binding to the CMPs and were associated with triple-helix destabilization. Although an Ala substitution locally destabilized hydrogen bonding and enhanced mobility, it did not significantly reduce the CMP-integrin interactions. MD simulations suggested that bulkier Gly → Xaa substitutions differentially disrupt the CMP-α2I interaction. The Gly → Arg substitution destabilized CMP-α2I side-chain interactions, and the Gly → Val change broke the essential Mg2+ coordination. The relationship between the loss of functional binding and the type of vEDS substitution provides a foundation for developing potential therapies for managing collagen disorders.

Enhanced angiogenesis by the hyaluronic acid hydrogels immobilized with a VEGF mimetic peptide in a traumatic brain injury model in rats.

Angiogenesis plays an important role in brain injury repair, which contributes to the reconstruction of regenerative neurovascular niche for promoting axonal regeneration in the lesion area. As a major component of developing brain extracellular matrix, hyaluronic acid (HA) has attracted more attention as a supporting matrix for brain repair. In the present study, HA-KLT hydrogel was developed via modifying HA with a VEGF mimetic peptide of KLT (KLTWQELYQLKYKGI). The characterization of the hydrogel shows that it could provide a porous, three-dimensional scaffold structure, which has a large specific surface area available for cell adhesion and interaction. Compared with the unmodified HA hydrogel, the HA-KLT hydrogel could effectively promote the attachment, spreading and proliferation of endothelial cells in vitro. Furthermore, the pro-angiogenic ability of hydrogels in vivo was evaluated by implanting them into the lesion cavities in the injured rat brain. Our results showed that the hydrogels could form a permissive interface with the host tissues at 4 weeks after implantation. Moreover, they could efficiently inhibit the formation of glial scars at the injured sites. The HA-KLT hydrogel could significantly increase the expression of endoglin/CD105 and promote the formation of blood vessels, suggesting that HA-KLT hydrogel promoted angiogenesis in vivo. Collectively, the HA-KLT hydrogel has the potential to repair brain defects by promoting angiogenesis and inhibiting the formation of glial-derived scar tissue.

Mast Cell Protease 7 Promotes Angiogenesis by Degradation of Integrin Subunits.

Previous studies from our laboratory have shown that during angiogenesis in vitro, rmMCP-7 (recombinant mouse mast cell protease-7) stimulates endothelial cell spreading and induces their penetration into the matrix. The ability of rmMCP-7 to induce angiogenesis in vivo was assessed in the present study using a directed in vivo angiogenesis assay (DIVAA™). Vessel invasion of the angioreactor was observed in the presence of rmMCP-7 but was not seen in the control. Since integrins are involved in endothelial cell migration, the relationship between rmMCP-7 and integrins during angiogenesis was investigated. Incubation with rmMCP-7 resulted in a reduction in the levels of integrin subunits αv and β1 on SVEC4-10 endothelial cells during angiogenesis in vitro. Furthermore, the degradation of integrin subunits occurs both through the direct action of rmMCP-7 and indirectly via the ubiquitin/proteasome system. Even in the presence of a proteasome inhibitor, incubation of endothelial cells with rmMCP-7 induced cell migration and tube formation as well as the beginning of loop formation. These data indicate that the direct degradation of the integrin subunits by rmMCP-7 is sufficient to initiate angiogenesis. The results demonstrate, for the first time, that mMCP-7 acts in angiogenesis through integrin degradation.

Surface modification of polyvinyl alcohol (PVA)/polyacrylamide (PAAm) hydrogels with polydopamine and REDV for improved applicability.

Developing a small-diameter vascular graft with a satisfactory performance in terms of mechanical and biological properties remains a challenging issue because of comprehensive requirements from clinical applications. Polyvinyl alcohol (PVA)/polyacrylamide (PAAm) hydrogels exhibit many desirable characteristics for small-diameter vascular grafts because of their tunable mechanical properties, especially high compliance. However, poor cells adhesion hinders their application for endothelialization in situ. Therefore, in the present work, polydopamine (PDA) and tetrapeptide Arg-Glu-Asp-Val (REDV) were used to functionalize the hydrogels surface and improve cells adhesion. A series of characterizations were systematically conducted to examine the applicability of coated hydrogels to small-diameter vascular grafts. Results showed that bare and coated hydrogels have appropriate structural stability, and no significant differences in tensile properties could be found after being coated with PDA or PDA-REDV. The hydrophilicity of the hydrogels decreased with the coatings of PDA and especially PDA-REDV to improve protein adsorption, porcine iliac artery endothelial cells (PIECs) adhesion, viability, proliferation, and spreading on the hydrogels. Lower hemolysis percentages and higher blood clotting index values were attained for the hydrogels, suggesting their satisfactory hemocompatibility. Overall, the present work provided insights into the development of a novel hydrogel-based small-diameter vascular graft. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:117-127, 2020.

Enhanced angiogenesis of biodegradable iron-doped octacalcium phosphate/poly(lactic-co-glycolic acid) scaffold for potential cancerous bone regeneration

Metallic therapeutic agents have been widely used in cancer therapy. Iron-based phases that work in concert with porous grafts provide promising strategies for chemotherapy and bone repair after surgery. However, seldom are studies associated to the involvement of extrinsic iron ions in the essential angiogenesis of implantation. In this work, we fabricated a novel iron-loaded biocomposite scaffold with hierarchical channels toward unraveling the influence of Fe3+ release on the angiogenic response of bone grafts. Iron-doped octacalcium phosphate (Fe-OCP) as a viable controllable ferric agent was prepared by homogeneous precipitation through hydrolysis of carbamide. The intervention of Fe3+ altered the crystallochemical properties of OCP with preferential growth of plane (h00) and inhibition growth of plane (00l). Fe-OCP significantly promoted the affinity, viability, proliferation, and angiogenic differentiation of human umbilical vein endothelial cells. The poly(lactic-co-glycolic acid) scaffold with Fe-OCP showed enhanced deposition of bone-like apatites and sustained Fe3+ release under simulated physiological environment. The scaffold supported endothelial cells adhesion and spreading, and notably enhanced angiogenesis with more blood vessels formation and higher specific markers expression. Results suggest that Fe3+ can increase HIF-1α levels and VEGF expression, and promote NO secretion and eNOS production, thus mediating endothelial cells behaviors and angiogenesis. These findings illuminate the remarkable angiogenic capability of iron-loaded grafts for potential cancerous bone repair, which paves the way for developing functionalized bone grafts in therapeutic biomaterials applications.

Biofunctionalized Electrospun PCL-PIBMD/SF Vascular Grafts with PEG and Cell-Adhesive Peptides for Endothelialization.

Artificial small-caliber vascular grafts are still limited in clinical application because of thrombosis, restenosis, and occlusion. Herein, a small-caliber vascular graft (diameter 2mm) is fabricated from poly(ε-caprolactone)-b-poly(isobutyl-morpholine-2,5-dione) (PCL-PIBMD) and silk fibroin (SF) by electrospinning technology and then biofunctionalized with low-fouling poly(ethylene glycol) (PEG) and two cell-adhesive peptide sequences (CREDVW and CAGW) with the purpose of enhancing antithrombogenic activity and endothelialization. The successful grafting of PEG and peptide sequences is confirmed by X-ray photoelectron spectroscopy. The suitable surface wettability of the modified vascular graft is testified by water contact angle analysis. The surface hemocompatibility is verified by platelet adhesion assays and protein adsorption assays, and the results demonstrate that both platelet adhesion and protein adsorption on the biofunctionalized surface are significantly reduced. In vitro studies demonstrate that the biofunctionalized surface with suitable hydrophilicity and cell-adhesive peptides can selectively promote the adhesion, spreading, and proliferation of human umbilical vein endothelial cells. More importantly, compared with control groups, this biofunctionalized small-caliber vascular graft shows high long-term patency and endothelialization after 10 weeks of implantation. The biofunctionalization with PEG and two cell-adhesive peptide sequences is an effective method to improve the endothelialization and long-term performance of synthetic vascular grafts.

Inhibition of mTOR in head and neck cancer cells alters endothelial cell morphology in a paracrine fashion

Head and neck squamous cell carcinoma (HNSCC) represent aggressive classes of tumors with a high mortality rate. The mammalian target of rapamycin (mTOR) pathway is instrumental in their initiation and expansion. Although results from pre-clinical models promise mTOR targeting as a potent novel therapeutic approach, its impact on the tumor microenvironment, such as endothelial cells is only scarcely investigated. Here, we first confirmed the effects of mTOR pharmacological inhibition on cell viability, clonogenicity, and proliferation in HNSCC human cell lines, HN26, and HN30. While Everolimus and Torin1 potently blunted mTOR-based proliferation of HN26 and HN30 lines, endothelial cells were left intact. To further explore the possibility of a paracrine bystander action of HNSCC-treated cells on endothelial cells, conditioned medium from Everolimus- and Torin1-challenged HN26 and HN30 cells were collected and applied to naive human endothelial cells. Although endothelial cell viability was again not modified, morphology and mobility were changed. Indeed, spreading of endothelial cells was altered upon challenge with mTOR-pretreated tumor conditioned-media, as measured via cell impedance and imagery. Interestingly, this was associated with an augmentation of focal adhesion kinase (FAK) active phosphorylation and enhanced migratory behavior. From a molecular standpoint, the production of vascular endothelial growth factor was elevated in treated HNSCC cells and might contribute to FAK phosphorylation. Although mTOR inhibition in tumor cells did hinder their growth, it also favors the release of factors that subsequently enable endothelial cell migration. Further studies will address how this paracrine action may affect tumor-driven angiogenesis upon pharmacological treatments.

Real-time QCM-D monitoring of endothelial cells and macrophages adhering and spreading to SEMA4D/heparin surfaces.

In vitro evaluation techniques that address cellular interactions under dynamic circumstances are required for the development of advanced biomaterials. In this study, quartz crystal microbalance and dissipation (QCM-D) provided a surface sensitive technique that enabled real-time monitoring of the adhesion and spreading response of endothelial cells (ECs) and macrophages (MAs) to soluble-semaphoring 4D (SEMA4D)/heparin modified substratum. The high heparin and low SEMA4D of substratum promoted ECs adhering and spreading. However, surfaces with high SEMA4D and low heparin enhanced MA adhering and spreading. Furthermore, DF plots of QCM-D indicated that the adhering and spreading of MAs were mainly mediated via the ligand-receptor interaction of SEMA4D-CD72, while both adhering and spreading of ECs were mainly mediated via heparin-induced integrin binding. This study suggests that QCM-D combined with other appropriate methods can be utilized to explore the mechanisms for cellular interaction with biomaterial surfaces.

Improving functional re-endothelialization of acellular liver scaffold using REDV cell-binding domain

Engineering of functional vascularized liver tissues holds great promise in addressing donor organ shortage for transplantation. Whole organ decellularization is a cell removal method that retains the native vascular structures of the organ such that it can be anastomosed with the recipient circulation after recellularization with healthy cells. However, a main hurdle to successful implantation of bioengineered organ is the inability to efficiently re-endothelialize the vasculature with a functional endothelium, resulting in blood clotting which is the primary cause of failure in early transplant studies. Here, we present an efficient approach for enhancing re-endothelialization of decellularized rat liver scaffolds by conjugating the REDV cell-binding domain to improve attachment of endothelial cells (EC) on vascular wall surfaces. In order to facilitate expression and purification of the peptide, REDV was fused with elastin-like peptide (ELP) that confers thermally triggered aggregation behavior to the fusion protein. After validating the adhesive properties of the REDV-ELP peptide, we covalently coupled REDV-ELP to the blood vasculature of decellularized rat livers and seeded EC using perfusion of the portal vein. We showed that REDV-ELP increased cell attachment, spreading and proliferation of EC within the construct resulting in uniform endothelial lining of the scaffold vasculature. We further observed that REDV-ELP conjugation dramatically reduced platelet adhesion and activation. Altogether, our results demonstrate that this method allowed functional re-endothelialization of liver scaffold and show great potential toward the generation of functional bioengineered liver for long-term transplantation. Statement of SignificanceThere is a critical need for novel organ replacement therapies as the grafts for transplantation fall short of demand. Recent advances in tissue engineering, through the use of decellularized scaffolds, have opened the possibility that engineered grafts could be used as substitutes for donor livers. However, successful implantation has been challenged by the inability to create a functional vasculature. Our research study reports a new strategy to increase efficiency of endothelialization by increasing the affinity of the vascular matrix for endothelial cells. We functionalized decellularized liver scaffold using elastin-like peptides grafted with REDV cell binding domain. We showed that REDV-ELP conjugation improve endothelial cell attachment and proliferation within the scaffold, demonstrating the feasibility of re-endothelializing a whole liver vasculature using our technique.

Abstract 2048: Interferon-γ triggers an anti-tumorigenic chain reaction in the tumor vessels of colorectal carcinoma

Abstract In colorectal carcinoma (CRC), a Th1-tumor microenvironment (TME) is associated with improved prognosis of the patients. The lead cytokine of the Th1-response is interferon (IFN)-γ. IFN-γ is predominantly regarded as an immunomodulatory cytokine. At present, its putative tumor blood vessel-directed anti-tumorigenic effects have not been investigated comprehensively. We demonstrate that the vascular effects of IFN-γ in CRC trigger a two-step anti-tumorigenic chain reaction. First, IFN-γ exerts direct angiostatic activity on endothelial cells. This was detected in vitro using primary endothelial cell cultures and in vivo in Th1-dominated inflammatory reactions of the colon using mouse models with specific deletion of the IFN-γ receptor-2 in endothelial cells and treatment with neutralizing anti-IFN-γ antibodies. Angiostatic IFN-γ effects could be validated in human CRC tissues using the cellular IFN-γ activation marker guanylate binding protein-1 which confirmed reduced angiogenic activity of vessels exposed to IFN-γ at that single cell level. IFN-γ-induced angiostasis was associated with a highly significantly improved cancer-related 5-year survival of the CRC patients (n=388). In a second step, angiostatic activity of IFN-γ resulted in the maintenance of mature tumor vessels in CRC tissues which expressed and secreted the anti-tumorigenic protein SPARCL1 in human CRC tissues (n = 42). This was significantly repressed in CRC tissues lacking a Th1 response. Functional analyses showed that SPARCL1 inhibited angiogenic activity of cultivated endothelial cells in different in vitro tests of angiogenesis (endothelial cell proliferation, migration, spreading, 3D-sprouting and capillary formation in matrigel), both after retrovirally triggered recombinant expression in endothelial cells or after adding the recombinantly purified human SPARCL1 protein. Interestingly, secreted SPARCL1 has also been shown to inhibit proliferation and migration of human CRC tumor cell lines. We could confirm the anti-tumor cell activity of soluble purified SPARCL1 using different tumor cell lines derived from mouse colon tumors (MC38) or mouse melanomas (B16F10), respectively. SPARCL1 inhibited proliferation and migration of both cell lines significantly. Using a mouse model system with a general knock out of the SPARCL1 gene, we obtained first evidence that the growth of metastatically spread MC38 cells in the lungs is repressed by SPARCL1 in vivo. Altogether our study demonstrates that the tumor vessel-directed effects of an IFN-γ-dominated tumor microenvironment in CRC trigger a two-step anti-tumorigenic chain reaction. This provides further insight into the potent anti-tumorigenic activity of a Th1-TME in CRC that may be of relevance for selection of patients' for anti-angiogenic therapy regiments. Moreover, our findings indicate novel pathways which may be prone to tumor immune evasion. Citation Format: Michael Stürzl, Victoria Langer, Daniela Regensburger, Clara Tenkerian, Annika Klingler, Maximilian Waldner, Christoph Becker, Valerie Meniel, Robert Grützmann, Carol-Immanuel Geppert, Nathalie Britzen-Laurent, Elisabeth Naschberger. Interferon-γ triggers an anti-tumorigenic chain reaction in the tumor vessels of colorectal carcinoma [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2018; 2018 Apr 14-18; Chicago, IL. Philadelphia (PA): AACR; Cancer Res 2018;78(13 Suppl):Abstract nr 2048.

Arsenic Trioxide-Coated Stent Is an Endothelium-Friendly Drug Eluting Stent.

An ideal vascular stent would both inhibit in-stent restenosis (ISR) and promote rapid re-endothelialization. In the current study, the performance of arsenic trioxide (ATO)-drug eluting stent (AES) is compared with the bare metal stent, poly-lactic-co-glycolic acid-coating metal stent, and rapamycin-drug eluting stent (RES). In vivo AES is shown to prevent neointimal hyperplasia more efficiently than the others when implanted into the carotid arteries of rabbits. Moreover, AES promotes endothelial cells proliferation and re-endothelialization more quickly than RES. In vitro ATO exposure significantly increases the viability, proliferation, adhesion, and spreading of primary porcine coronary artery endothelial cells (PCAECs), which are critical for endothelialization. However, ATO exposure reduces the viability of porcine coronary artery smooth muscle cells (PCASMCs). The evaluation of mitochondrial morphology, membrane potential, and function demonstrates that ATO at 2 µmol L-1 causes enlargement of the mitochondrion, enhancement of mitochondrial membrane potential, and adenosine triphosphate (ATP) production in PCAECs but not in PCASMCs. Thus, both in vivo and in vitro studies demonstrate that AES is an effective strategy for rapid re-endothelialization and inhibition of ISR.

Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs

Lithography-based three-dimensional (3D) printing technologies allow high spatial resolution that exceeds that of typical extrusion-based bioprinting approaches, allowing to better mimic the complex architecture of biological tissues. Additionally, lithographic printing via digital light processing (DLP) enables fabrication of free-form lattice and patterned structures which cannot be easily produced with other 3D printing approaches. While significant progress has been dedicated to the development of cell-laden bioinks for extrusion-based bioprinting, less attention has been directed towards the development of cyto-compatible bio-resins and their application in lithography-based biofabrication, limiting the advancement of this promising technology. In this study, we developed a new bio-resin based on methacrylated poly(vinyl alcohol) (PVA-MA), gelatin-methacryloyl (Gel-MA) and a transition metal-based visible light photoinitiator. The utilization of a visible light photo-initiating system displaying high molar absorptivity allowed the bioprinting of constructs with high resolution features, in the range of 25–50 μm. Biofunctionalization of the resin with 1 wt% Gel-MA allowed long term survival (>90%) of encapsulated cells up to 21 d, and enabled attachment and spreading of endothelial cells seeded on the printed hydrogels. Cell-laden hydrogel constructs of high resolution with complex and ordered architecture were successfully bioprinted, where the encapsulated cells remained viable, homogenously distributed and functional. Bone and cartilage tissue synthesis was confirmed by encapsulated stem cells, underlining the potential of these DLP-bioprinted hydrogels for tissue engineering and biofabrication. Overall, the PVA-MA/Gel-MA bio-resin is a promising material for biofabrication and provides important cues for the further development of lithography-based bioprinting of complex, free-form living tissue analogues.