End-member Model Research Articles

Reconstructing the late Quaternary soil erosion and dust deposition dynamics in the southern Loess Plateau: Insights from Lake Luyanghu sedimentary records

Investigating the history of wind-dust deposition and soil erosion is crucial for understanding the relationship between geomorphologic formation, monsoon evolution and the current state of soil erosion on the Loess Plateau. This study utilizes a 50-m sedimentary record from Lake Luyanghu (LYH) in the southern Loess Plateau. We developed a chronological framework using optically stimulated luminescence (OSL) dating and stratigraphic comparisons. By applying end-member modeling of grain size, we identified various sediment sources and quantitatively reconstructed the dust deposition fluxes and soil erosion modulus during the late Quaternary. Additionally, we examined the patterns of sediment source evolution with environmental changes at LYH. Our findings reveal that dust constitutes an average of 32.3% of the lake sediments, with an average deposition rate of 40.2 g/cm2/ka. Notably, after the Last Glacial period, dust deposition became the dominant component of the lake sediment. During the Marine Isotope Stages (MIS) 5b, 5d, 4 and 2, enhanced dry climatic conditions, decreased vegetation cover and composition, leading to significant soil erosion. Based on the results of this research, future studies should aim to reconstruct the watershed's erosion and deposition processes throughout geological periods by integrating aspects of lake evolution, such as water levels and developmental stages.

A Northgrippian sedimentary magnetic enhancement along the western margin of India

Sedimentary magnetic records of shelf region contains complex environmental evolution information, necessitating records from various global regions to accurately interpret its significance. A sediment core (SSD-39/GC-01) retrieved from the eastern Arabian Sea was analyzed to elucidate the geologic and climatic controls on the sediment rock magnetic and grain size properties. We report the first record of high energy sediment deposits linked with intense monsoon phases, sea level variations, and extreme natural events during the Northgrippian period (8.27 ka to 4.20 ka). The compilation of magnetic susceptibility profiles of six sediment cores from the western margin of India revealed the presence of multiple sedimentary intervals of enhanced magnetic susceptibility and most likely reflect periods of high sedimentation events controlled by the regional geologic and climatic processes. We identified two anomalous sedimentary magnetic zones (Z-II, Z-IV) marked by an elevated magnetite content and sediment grain size, which reflect the periods of high-sedimentation events on the shelf off Goa. A shift in the magnetic mineral composition, clastic grain size, calcium carbonate, and organic carbon content at ~1.8 ka (Z-I) indicate a abrupt change in monsoon intensity. The elevated organic content within Z-I indicate efficient preservation of labile organic matter which survived oxidation due to rapid sediment deposition. End-member modeling of rock magnetic and grain size properties enabled us to discriminate and quantify the contributions of terrigenous fluxes and post-depositional mineral phases to the bulk magnetic mineral assemblage. We demonstrate that rapid scanning of magnetic susceptibility of sediment cores has the potential to precisely detect the periods of increased continental (magnetic flux) inputs into the marine shelf system. The proposed magnetic mineralogical approach has wider scope to constrain the understanding of how shelf sedimentation responded to past geological and climatic conditions globally.

Hydrogeological structure of a seafloor hydrothermal system deduced from a pair of positive and negative self-potential anomalies observed at the Oomuro-dashi hydrothermal field in the Izu-Ogasawara Arc, south of Japan

This paper presents and interprets two new self-potential data measured over a hydrothermally active field associated with a Quaternary rhyolitic volcano, Oomuro-dashi, in the northern Izu-Ogasawara Arc, south of Japan. The measured data show a pair of positive and negative anomalies of the order of one millivolt at 5 m above the seafloor. The observation of a positive self-potential near a seafloor hydrothermal system is new, in spite that negative self-potential anomalies have been regularly reported in various studies for different locations. Determining the dominant mechanism(s) is therefore key to further understanding the subseafloor structure of seafloor hydrothermal systems. To this end, we also conducted long-term observations of subseafloor temperatures at two sites in the area of the self-potential anomaly to estimate the Darcy velocity. We found a downward fluid flow of the order of tens of metres per year at both sites. The flow in the area of the negative self-potential anomaly is stronger than in the area of the positive anomaly. Based on these observations, we propose two end-member models to explain the paired self-potential anomaly. The first model considers a horizontal geo-battery, in which part of a subhorizontal electrically conductive body is crossed by a subvertical redox front. In this model, the oxidised part of the geo-battery causes a negative self-potential anomaly, as in the previous observations, while the reduced counterpart of the geo-battery, which is normally buried, is exposed near the seafloor and causes a positive anomaly. In this case, a conductive body is expected to lie beneath both anomalies, and we could access the reduced part of the geo-battery. This model is consistent with the results of the Darcy velocity estimation if the strong hydrothermal circulation would cause the redox horizon to deepen. The second model is a combination of the thermal and streaming potentials causing both positive and negative self-potential anomalies. This model does not necessarily require a buried conductive body beneath the self-potential anomalies. These end-member models could be distinguished by resistivity imaging, which identifies the distribution of conductive bodies beneath self-potential anomalies, although they would overlap in natural systems.Graphical

ENSO modulates soil organic carbon retention and deposition in the East China Sea

Accurately quantifying the contribution of terrestrial soil organic carbon (SOC) in marine environment is still a challenge. Moreover, reassessing the effect of climate change on SOC variability is necessary, with the increasing variability of El Niño under greenhouse warming. Here, we present new insights from bacterial 3-hydroxy fatty acids (3-OH-FAs) by systematically analyzing the distributions of 3-OH-FA in soils, lake/river sediments and marine sediments, and propose a novel proxy (RIA, the ratio of odd carbon number iso to anteiso 3-OH-FAs) to quantificationally evaluate the contribution of OC from different components. The reliability of the RIA proxy is tested by using a three end-member model and Monte Carlo simulations along a transect from the Yangtze River estuary to the ECS shelf. Then the RIA proxy is applied to a core in the East China Sea covering the past 700 years, and the results reveal that El Niño (La Niña) induced more (less) precipitation and increased (decreased) SOC deposition. This study provides a novel approach for quantifying terrigenous OC inputs and burial in marginal seas and shows the impact of El Niño-Southern Oscillation (ENSO) modes on SOC loss and burial in marginal seas under global warming.

Study on Holocene environmental evolution based on grain size end-member model: A case study of two outcrop sections in Salawusu River Basin

Study on Holocene environmental evolution based on grain size end-member model: A case study of two outcrop sections in Salawusu River Basin

Sedimentological and geochemical proxies reveal changes in the South Atlantic Convergence Zone in Southeast South America during the Late-Holocene

Today, the South Atlantic Convergence Zone (SACZ), a convective band that extends across central Brazil to the western South Atlantic Ocean, modulates Southern Hemisphere summer rainfall in Southeastern Brazil. During the Holocene, however, the role of the SACZ over the rainfall regime in this part of South America is still under debate. This study aims to provide new insights into the SACZ Late-Holocene variability through analysis of the geochemical (XRF-based bulk sediment Metal/Metal ratios) and sedimentological (grain size and end-member modeling) variations along four cores retrieved in a coastal area (24–49 m water depth) located in the core of modern SACZ. Our records show an increase in Ti/Ca ratios, suggesting increased rainfall and that the terrigenous input to the Brazilian southeastern inner shelf changed in the Late-Holocene (last 4200 years). These changes are also followed by a decrease in the K/Ti ratio, indicative of an increase in chemical weathering in the sediment source, and an increase in the Mn/Ti, suggesting an increase in oxidation. Additionally, decadal-scale variability with periodicities of 25 and 55 years obtained by a time-series (Redfit) analysis highlights a potential role of the Pacific Decadal Oscillation and the Atlantic Multidecadal Oscillation, respectively, as drivers of the SACZ variability over the last 4200 years.

Active and passive salt diapirs: a numerical study

Summary Salt diapirs dominate the structure in many sedimentary basins and control the preservation and migration of hydrocarbon. The formation of salt diapirs generally falls into two endmember models: active (up-building) and passive (down-building) diapirism. In the active model, salt diapirs rise from salt buoyancy to pierce through the sedimentary overburden, whereas in the passive model, salt diapirs result from differential loading of sediments during deposition. These endmember models are mostly conceptual or kinematic, the mechanics of active and passive diapirism, and their relative roles and interactions in the formation of salt diapirs, remain uncertain. Here, we use two-dimensional high-resolution numerical models to investigate the primary factors and critical conditions for active and passive diapirism. Our results indicate that it is improper to use driving mechanisms to classify salt diapirs, because the buoyancy-driven active salt diapirism involves differential loading, while the passive diapirism requires salt buoyancy. The rise of salt diapirs is more sensitive to the effective viscosity of the overburden than to the salt viscosity. Stiff overburdens could prevent the rise of salt diapirs, but they could be pierced by salt diapirs if plastic yield of the overburden is allowed. During deposition, the coupled salt-sediment deformation, driven by both salt buoyancy and differential loading of sediments, can lead to various diapiric salt structures and minibasins. Regional tectonic stress generally promotes salt diapirism by enhancing strain weakening of salts and overburdens. We suggest that the classification of active and passive salt diapirism is an oversimplification in most cases. We propose a general model of the formation of salt diapirs that usually begins with dome initiation driven by salt buoyancy, followed by syndepositional down-building controlled by sedimentation and differential loading, and ends with canopy formation when sedimentation stops.

Grain-size distribution characteristics of sediments in coastal shallow waters from Van Don to Tien Yen - Ha Coi, Northwest Gulf of Tonkin, Vietnam, according to End-member modelling analysis

The study involved the collection of eighteen surface sediment samples from the coastal shallow water area from Van Don to Tien Yen - Ha Coi in the Northwestern section of the Gulf of Tonkin to analyze their particle size composition. Utilizing the EMMAgeo end-member analysis model, four characteristic particle sizes (4EM) of 0.34, 7.7, 130, and 230 µm, corresponding to clay, fine silt, and fine sand of varying sizes were identified. In conjunction with the sedimentary environment, the spatial distribution analysis of these end members allowed a detailed determination of the formation conditions and distribution of the sediment components. Clay deposits (EM1) are primarily intercalated between the islands. At the same time, fine silt (EM2) is concentrated in the northern part of the study area, transported by flows, and deposited in a low-energy environment. Fine sand sediments (EM3 and EM4) are distributed along the coast of the Van Don peninsula in the Southern part of the study area and likely formed in association with tidal-wave processes under higher energy conditions compared to the North.

Deciphering quaternary sediment dynamics: a synthesis of X-ray CT imaging and grain size endmember modeling

Deciphering quaternary sediment dynamics: a synthesis of X-ray CT imaging and grain size endmember modeling

Post-glaciation depositional changes in Wijdefjorden, northern Svalbard, using grain-size end-member modelling

Grain-size end-member (EM) modelling is a robust statistical approach for identifying and quantifying dominant grain-size distributions. This approach provides a novel perspective for understanding the impact of interactions between depositional processes in complex sedimentary environments. This study examines grain-size distributions of six glacimarine sediment cores collected along an NS transect from the continental shelf to the Wijdefjorden system in northern Svalbard. In addition, we integrate grain-size EMs with lithologic and acoustic facies, allowing us to identify three distinct groups of EMs (EM1–3), each closely associated with specific depositional processes: turbid meltwater discharge (EM1), sediment winnowing by bottom currents (EM2), and the deposition of ice-rafted debris in glacimarine conditions and subglacial till (EM3). An analysis of the three EM groups reveals that the glacial retreat during the last deglaciation and the Atlantic Water inflow significantly impacted depositional changes within the Wijdefjorden system. In contrast, a decrease in the Atlantic Water inflow during the late Holocene corresponds to glacial re-advance, resulting in shifts in the depositional environment. This study demonstrates the utility of EM modelling in deciphering complex grain-size distributions and reconstructing different climate-driven depositional processes in glacimarine sediments in Svalbard fjords. This integrated approach enhances our understanding of the intricate interplay among climate change, glacier dynamics, and oceanic forcing in polar fjord environments.

Controls on terrigenous sediment supply to northwestern South China Sea based on a sediment trap record at Xisha Trough

The South China Sea (SCS) is the largest marginal sea in the western Pacific and comprises an ideal natural laboratory for studying deep-sea processes. Previous investigations in the region have primarily focused on surface currents and to a lesser extent on intermediate currents, while observations of bottom currents are scarce, hindering our understanding of deep ocean sediment transport and deposition mechanisms. Here, we carried out grain size measurement and end-member modelling analysis (EMMA) on samples collected by a sediment trap at a water depth of 1500 m in the Xisha Trough in the northwestern South China Sea. Grain size data shows that terrigenous material has particle sizes ranging from 0.3 μm to 745.9 μm and a peak at 4–11 μm. The EMMA result suggests that finer sediment accounting for an average of 48.2% of the sediment represents material transported by deep water currents (End-member 1; EM1), and this is primary sediment source in the region. Coarser sediment contributing to 32.9% of the sediment is the second most significant source (EM3), representing the deposits of surface currents influenced by monsoons and deposited close to the source. A third sediment type (EM2) constituting approximately 18.9% of the sediment exhibits a wide range of grain sizes and rapid changes, indicating transport in the bottom nepheloid layer triggered by anticyclonic eddies. Our study identifies three primary sediment transport mechanisms to the northwestern SCS, bridging present-day observations with paleoceanography and providing a crucial basis for future research on paleoceanographic reconstructions.

Remagnetization of magnetite-bearing rocks in the Eastern Qiangtang Terrane, Tibetan Plateau (China): Mechanism and diagnosis

Remagnetization is a common yet notorious phenomenon that interferes with paleogeographic reconstruction. Classical paleomagnetic field tests are helpful in detecting remagnetization but their diagnostic power is limited: remagnetization may occur before folding, the tilting age may be ambiguous, or protracted remagnetization may yield dual polarities. Rock magnetic information can provide other constraints on our understanding of the origin of natural remanent magnetization (NRM). Here we focus on the rock magnetic properties of acknowledged remagnetized limestones and unremagnetized rocks of the Zaduo area in the Eastern Qiangtang Terrane, Tibetan Plateau (China). Chemical remanent magnetization is suggested as a more frequent mechanism than the thermoviscous resetting of the NRM. The secondary NRM resides in authigenic magnetite of stable single domain and superparamagnetic (SP) size which grew during post-depositional burial processes. Both high-field and low-field thermomagnetic runs reveal the alteration of existing iron sulfides to magnetite in the remagnetized limestones. NRM decay curves show that the maximum unblocking temperature of the remagnetized samples is significantly lower than that of the unremagnetized samples. Component analysis of acquisition curves of the isothermal remanent magnetization (IRM) reveals a hard component that represents SP magnetite in remagnetized limestones. This component is absent in unremagnetized rocks. End-member modelling reveals a convex curve in the coefficient of determination versus the number of end-members plot for the unremagnetized limestones, whereas the remagnetized rocks exhibit both near-linear and convex shapes. In addition, quantitative analysis of the hysteresis loop shape for different lithologies indicates its validity in detecting remagnetization. Furthermore, we show the differences in the hysteresis data distributions of the two rock types on the Day plot, the Néel diagram, the Borradaile diagram, and the Fabian diagram. Our research emphasizes that rock magnetic properties can serve as tools to diagnose remagnetization in magnetite-dominated rocks. We recommend a comprehensive rock magnetic study to discriminate remagnetization, involving the Day plot, Fabian diagram, thermal demagnetization curves, IRM component analysis and end member modelling.

On the temperature sensitivity of near-surface seismic wave speeds: application to the Groningen region, the Netherlands

SUMMARY Subsurface temperature measurements play a crucial role, for instance, in optimizing geothermal power plants and monitoring heat-storage systems. Previous studies have demonstrated that time-lapse variations in temperature can be correlated with variations in seismic wave speeds, offering the potential for temperature monitoring via seismic surveys. However, an apparent discrepancy has emerged between field and laboratory experiments. Field studies predominantly report positive correlations between temperature and seismic wave speeds, while laboratory experiments often show anticorrelations. This inconsistency underscores the need for a more comprehensive, physics-based understanding of temperature-induced wave speed changes. In this study, we strive to bridge the gap between field and laboratory findings by examining several mechanisms governing temperature-induced seismic wave speed changes, namely the intrinsic temperature dependency of elastic parameters and thermally induced elasticity. We present a physics-based modelling approach to identify the primary mechanisms responsible for temperature-induced seismic wave speed changes. By considering several end-member models, we find that intrinsic temperature dependency of elastic parameters (negative correlation) compete with thermal pressure effects (positive correlation). The precise initial and boundary conditions and physical parameters of the system under consideration will determine the weight of both effects. Temperature-related dilatation does not seem to play an important role. We apply our approach to loosely consolidated sediments in the shallow subsurface of the Groningen region, where subsurface temperature fluctuations are driven by seasonal atmospheric temperature fluctuations roughly between −5 and $30\, ^\circ$C. For these models, we predict seasonal temperature-induced changes in body-wave speeds of up to 8 per cent in the first few metres of the subsurface, high-frequency (above 2 Hz) surface wave phase velocity variations in the range of 1–2 per cent, and relative changes in site amplification on the order of 4 per cent. These findings contribute to a more comprehensive understanding of the intricate relationship between temperature and near-surface seismic properties, offering insights for applications as subsurface temperature monitoring systems.

Level, distribution and sources of Np, Pu and Am isotopes in Peter the Great Bay of Japan sea

Transuranium elements such as Np, Pu and Am, are considered to be the most important radioactive elements in view of their biological toxicity and environmental impact. Concentrations of 237Np, Pu isotopes and 241Am in two sediment cores collected from Peter the Great Bay of Japan Sea were determined using radiochemical separation combined with inductively coupled plasma mass spectrometry (ICP-MS) measurement. The 239,240Pu and 241Am concentrations in all sediment samples range from 0.01 Bq/kg to 2.02 Bq/kg and from 0.01 Bq/kg to 1.11 Bq/kg, respectively, which are comparable to reported values in the investigated area. The average atomic ratios of 240Pu/239Pu (0.20 ± 0.02 and 0.21 ± 0.01) and 241Am/239+240Pu activity ratios (3.32 ± 2.76 and 0.45 ± 0.17) in the two sediment cores indicated that the sources of Pu and Am in this area are global fallout and the Pacific Proving Grounds through the movement of prevailing ocean currents, and no measurable release of Np, Pu and Am from the local K-431 nuclear submarine incident was observed. The extremely low 237Np/239Pu atomic ratios ((2.0–2.5) × 10−4) in this area are mainly attributed to the discrepancy of their different chemical behaviors in the ocean due to the relatively higher solubility of 237Np compared to particle active plutonium isotopes. It was estimated using two end members model that 23% ± 6% of transuranium radionuclides originated from the Pacific Proving Grounds tests, and the rest (ca. 77%) from global fallout.

Multi-Scale Analysis of Grain Size in the Component Structures of Sediments Accumulated along the Desert-Loess Transition Zone of the Tengger Desert and Implications for Sources and Aeolian Dust Transportation

Aeolian sediments accumulated along the desert-loess transition zone of the Tengger Desert include heterogeneous textures and complex component structures in their grain-size distributions (GSD). However, the sources of these aeolian sediments have not been resolved due to the lack of large reference GSD sample datasets from adjacent regions that contain various types of sediments; such datasets could be used for fingerprinting based on grain-size properties. This lack of knowledge hinders our understanding of the mechanism of aeolian dust releases in these regions and the effects of forcing of atmospheric circulations on the transportation and accumulation of sediments in this region. In this study, we employed a multi-scale grain-size analysis method, i.e., a combination of the single-sample unmixing (SSU) and the parametric end-member modelling (PEMM) techniques, to resolve the component structures of sediments that had accumulated along the desert-loess transition zone of the Tengger Desert. We have also analyzed the component structures of GSDs of various types of sediments, including mobile and fixed sand dunes, lake sediments, and loess sediments from surrounding regions. Our results demonstrate that the patterns observed in coarser fractions of sediments (i.e., sediments with a mode grain size of >100 μm) from the transition zone match well with the patterns of component structures of several types of sediments from the interior of the Tengger Desert, and the patterns seen in the finer fractions (i.e., fine, medium, and coarse silts with a modal size of <63 μm) were broadly consistent with those of loess sediments from the Qilian Mountains. The deflation/erosion of loess from the Qilian Mountains by wind was the most important mechanism underlying the production of these finer grain-size fractions. The East Asia winter monsoon (EAWM) played a key role in transportation of the aeolian dust from these source regions to the desert-loess transition zone of the desert.

Origin of Crystals in Mafic to Intermediate Magmas from Circum-Pacific Continental Arcs: Transcrustal Magmatic Systems Versus Transcrustal Plutonic Systems

Abstract Complex zoning in crystals including repeated resorption and overgrowth is characteristic for arc magmas and occurs in response to closed-system changes in magmatic P–T–fO2 conditions and open system processes such as magma mixing and degassing or regassing. However, over which time frame do such changes occur? Do zoning patterns record changes occurring during the polybaric ascent of magmas that carry crystals or glomerocrysts sourced from variably mushy magma reservoirs, or alternatively indicate the uptake of antecrysts that experienced long periods of cold storage in plutonic precursors? A priori, these scenarios are endmember models, with the former transcrustal magmatic systems, where the crystals record changing conditions during magma ascent or changing interstitial melt compositions, traditionally preferred over the latter, which we here term transcrustal plutonic systems. In subsolidus plutonic systems, aphyric parental melts would acquire their entirely antecrystic crystal cargo during ascent from plutonic protoliths, and only crystal rims may be related to the host magma. We discuss the evidence for dominantly plutonic antecrystic cargo in some continental arc magmas, identified by considering mineral phase proportions, hydration of crystal rims that indicate hydrothermally altered cargo picked up by fresh melts, and uranium isotope disequilibria between crystals and matrix. We then turn to two-pyroxene thermobarometry and review the evidence for plutonic antecryst dominance revealed by this method in southwest Japan and the southern Taupo Volcanic Zone. We provide additional two-pyroxene data from the Andes, the Cascades, and the Tatun Volcano Group in northern Taiwan, corroborating that the uptake of crystals by aphyric to scarcely phyric melts is prevalent in continental arc magmatic systems. Thus, in many cases transcrustal plutonic systems seem to dominate, implying that a significant proportion of parental melts of continental arc magmas are variably enriched in silica, too hot to carry crystals, and typically too hot and not hydrous enough to be generated by differentiation in frequently postulated lower crustal hot zones, as we will demonstrate here. Our data indicate that in continental subduction zones, the mantle wedge is the source of a diversity of melt compositions (low- to high-silica), irrespective of the age and temperature of the subducting slab. Before discussing some of the implications of the prevalence of non-canonical transcrustal plutonic systems for the thermal structure of the crust, magma ascent processes, volcano monitoring, economic geology, as well as the evolution of continental crustal growth and recycling through deep time, we critically evaluate this novel perspective in terms of published data that might favour more traditional supersolidus transcrustal magmatic systems. This contribution provides the community with the opportunity to consider significantly colder crustal environments than typically accepted, and outlines avenues of future research.

Holocene climatic and tectonic forcing of decadal hydroclimate variation on the north-eastern Tibetan Plateau

A better understanding of past climate and landscape variability in high resolution on the Tibetan Plateau is of critical importance for the understanding of fundamental mechanisms and interactions in the global climate system. However, due to relatively few datasets in decadal-resolution available for analyzing possible seasonal effects and seismic activity on the northeastern Tibetan Plateau, further high-resolution lake records as an integration need to be explored to test the significance of the seasonal variations of surface processes and climatic phenomena as well as tectonic impact on a decadal scale. The rhomb-shaped pull-apart Lake Donggi Cona along the modern monsoon marginal zone on the north-eastern TP is considered an excellent archive that monitors neotectonic and climatic changes through time. We obtained new high-resolution (mean 20 yr) proxy records from a 488 cm-long sediment core from the lake and compare them directly with paleoclimate records from nearby lakes. A decadal-resolution oxygen stable isotope (δ18O) record co-varies positively with carbonate content and demonstrates the profound and varying contribution of glacier/snow melt (winter/spring moisture) to lake hydrology at different lake evolution stages. This is also indicated by the grain size composition and related endmember modelling (EMMA) results. During 11.8–9.4 cal Ka BP, the lake experienced a swamp status, apart from the major lake body followed by water rise towards the littoral zone until 7.5 cal Ka BP. Glacier melt water supply started to be active since the late Younger Dryas and led to the strong excursions of carbonate contents and δ18O values according to insolation increase. This phase was dominated by the westerlies and characterized as low seasonality with long winter duration. Water rose to its highest level during 7.5–6.5 cal Ka BP and fluctuated with deep water phases until 4.7 cal Ka BP, due to glacier melt maxima and potential increase of summer (convective) moisture preserved in the oxygen isotopic signals. Water cover dropped and remained low until 2.9 cal Ka BP due to the reduced glacier melt and colder climate. However, the low δ18O values at a reduced water budget points to the still active contribution of spring glacier/snow melt that kept the lake not dry-up unlike other lakes with no glacier melt water supply. After 2.9 cal Ka BP water level dropped towards a pond/lagoon situation until 2.0 cal Ka BP, albeit temperature rise after a long cold climatic interlude. It might be caused by another phase of lake deepening triggered by subsidence and related sediment relocation from the shore, rather than by climatic factors. However, water level increased again afterwards and fluctuated towards the present level due to non-summer moisture supply in long freezing winters. We assume profound signatures of high seasonality in climate after 7.5 cal Ka BP and the lake became open since1.3 cal Ka BP. We suggest that combined thermal forcing by glacier/snow melt and tectonics play a significant role together with solar forcing, governing hydroclimate changes on the north-eastern Tibetan Plateau with decadal to millennial cycles.

Palaeoenvironmental and Palaeoclimatic Conditions in the Bhimtal Valley, Kumaun Lesser Himalaya, Between 40 and 24 ka Using Granulometric Analysis

In this research, we conducted a detailed granulometric analysis of 9.5 m thick palaeolake succession, exposed at Bilaspur (Bhimtal) in the Kumaun Lesser Himalaya to reconstruct the palaeoenvironmental and palaeoclimatic conditions. We carried out statistical parameters of grain-size data (i.e., standard deviation, kurtosis, and skewness, bivariate plots), and end member modelling analysis (EMMA) and our study reveal sediment’s unimodal and bimodal nature, deposited via fluvial action under low to high energy environmental conditions since the origin of the lake. Some parts of the deposit show poorly sorted and mixed character (leptokurtic to platykurtic) of sediments, indicating that the sediments were primarily transported from the proximal area of the lake basin under low-energy environmental conditions. The finely skewed and poorly sorted sediments show different modes of grain size distribution, which are attributed to fluctuations in the hydrodynamic conditions of the lake. The arid climatic conditions prevailed in the valley from ca. 42 to 40 ka BP, followed by warm and moist conditions from ca. 40 to 39 ka BP. The arid conditions under the low rainfall regime were experienced by the valley from ca. 39 to 30 ka BP, while it exercised another episode of moist and warmer conditions from ca. 30 to 24 ka BP. Further, the end-Member Modelling Analysis (EMMA) shows four end members (EM1-EM4) with different climatic conditions during the deposition, e.g., clay to fine silt-size particles reflecting higher lake levels under warm-wet climatic conditions, coarse silt fraction representing moderate energy conditions, and fine to coarse sand fractions indicating shallow lake-level conditions in the arid climatic conditions as well higher energy flow. The interpretation of energy conditions in the lake and catchment area by using various methods reveals different palaeoenvironmental conditions during the sediment deposition.

Quantitative provenance study of sediments in the coastal tidal flats of central Jiangsu based on grain-size End-Member analysis

The coastal mudflats in central Jiangsu Province are influenced by the sediment supply from the Yangtze River and the abandoned Yellow River. However, the sources of sediment in this area have yet to be confirmed, and quantitative studies have been limited. In this study, we addressed this gap by obtaining sediment core samples with lengths of approximately 100 cm from Dongtai and Sheyang, respectively, on the central coast of Jiangsu Province in 2018. The sediment sources were identified and quantitatively evaluated using a grain-size end-member(EM) model. The findings revealed that (1) Sheyang was decomposed into five EMs, with EMs 1-3 originating from the abandoned Yellow River, EM 4 originating from the Yangtze River and the North Jiangsu radial sand ridges (NJRSR), and EM 5 originating from the NJRSR. Over a century scale, the abandoned Yellow River contributed 73.91% to sediment deposition in Sheyang, while the Yangtze River and the NJRSR contributed 26.09%. (2) Dongtai was decomposed into six EMs, with EMs 1-4 originating from the abandoned Yellow River, EM 5 originating from the Yangtze River, and EM 6 originating from the Yangtze River and the NJRSR. Over a century scale, the abandoned Yellow River contributed 70.55% to sediment deposition in Dongtai, and the Yangtze River and the NJRSR contributed 29.45%. (3) On a temporal scale, the contribution of the abandoned Yellow River to sediment deposition on the central mudflats of Jiangsu Province showed an increasing trend. Spatially, the contribution of the abandoned Yellow River to sediment deposition decreased from north to south. (4) There were significant changes in the sediment sources of Sheyang and Dongtai at the depths of 56 cm and 60 cm, respectively, which both experiencing an increased sediment supply from the abandoned Yellow River. In Dongtai, the sediment on the southern side had increased contributions from the abandoned Yellow River due to a reduction in the sediment supply from the Yangtze River. In Sheyang, the sediment on the northern side had increased contributions from the abandoned Yellow River due to the introduction of Spartina alterniflora, despite no actual changes in the sediment sources.

Identification of sandy nourished sediments using end-member analysis (EMMAgeo) applied to particle shapes distributions, Sylt Island, North Sea

Sediments occurring in clastic depositional coastal and marine environments share similar sedimentary characteristics despite their different provenances. Identifying the deposits' origin found at a specific site may be essential, but also a challenging task. This paper discusses a fast methodology to recognise the primary source of sediments using end-member modelling, applied specifically to particle shape distributions instead of the classical approach of using grain-size distributions only. Artificial mixtures of coastal cliff and nourished sediments from Sylt Island (North Sea) were measured with a dynamic image analyser. Roundness, sphericity, convexity, and aspect ratio shape descriptors were analysed using the EMMAgeo R-based algorithm to compare mixtures to original sediments. Roundness distribution appeared to be a useful shape descriptor for distinguishing nourished sediments and their content in mixed samples. This method may be applied for future sediment pathway analyses, e.g., for tracking nourishment materials.