Encapsulation Of Nanoparticles Research Articles

In vitro evaluation and in situ intestinal absorption characterisation of paeoniflorin nanoparticles in a rat model.

Purpose: the aim of this study was to improve the stability and bioavailability of paeoniflorin (PF) by using nanoparticle encapsulation technology. Methods: paeoniflorin nanoparticles (PF NPs) were prepared with PLGA as the carrier using the compound emulsion method. The nanoparticles were characterised by using a Malvern laser particle sizer, transmission electron microscope (TEM), X-ray diffraction (XRD) analyser, and Fourier-transform infrared (FT-IR) spectrometry. The PF NPs were subjected to a series of stability investigations (such as for 4 °C storage stability, pH stability, and thermal stability), lyophilisation protection technology investigations, and in vitro release studies. Finally, the intestinal absorption properties of PF and PF NPs were studied by the in situ single-pass intestinal perfusion (SPIP) rat model, using the effective permeability coefficient (P eff) and the absorption rate constant (K a) as relevant indexes. Results: the prepared nanoparticles had a particle size of 105.0 nm with blue opalescent, rounded morphology, uniform size, good stability and slow release. We found that 4% alginate was the best lyoprotectant for the PF NPs. In the intestinal absorption experiments, P eff was higher for the PF NPs group compared with the original PF material drug group in all intestinal segments (P < 0.05), and the absorption rate constant K a increased with the increase in the drug concentration. Conclusion: the nanoparticles produced by this method have good stability and a slow-release effect; they can thus improve the absorption of PF in rat intestines, helping improve the stability and bioavailability of PF and enhancing its pharmacological effects.

Near Infrared Biomimetic Hybrid Magnetic Nanocarrier for MRI-Guided Thermal Therapy.

Cell-membrane hybrid nanoparticles (NPs) are designed to improve drug delivery, thermal therapy, and immunotherapy for several diseases. Here, we report the development of distinct biomimetic magnetic nanocarriers containing magnetic nanoparticles encapsulated in vesicles and IR780 near-infrared dyes incorporated in the membranes. Distinct cell membranes are investigated, red blood cell (RBC), melanoma (B16F10), and glioblastoma (GL261). Hybrid nanocarriers containing synthetic lipids and a cell membrane are designed. The biomedical applications of several systems are compared. The inorganic nanoparticle consisted of Mn-ferrite nanoparticles with a core diameter of 15 ± 4 nm. TEM images show many multicore nanostructures (∼40 nm), which correlate with the hydrodynamic size. Ultrahigh transverse relaxivity values are reported for the magnetic NPs, 746 mM-1s-1, decreasing respectively to 445 mM-1s-1 and 278 mM-1s-1 for the B16F10 and GL261 hybrid vesicles. The ratio of relaxivities r2/r1 decreased with the higher encapsulation of NPs and increased for the biomimetic liposomes. Therapeutic temperatures are achieved by both, magnetic nanoparticle hyperthermia and photothermal therapy. Photothermal conversion efficiency ∼25-30% are reported. Cell culture revealed lower wrapping times for the biomimetic vesicles. In vivo experiments with distinct routes of nanoparticle administration were investigated. Intratumoral injection proved the nanoparticle-mediated PTT efficiency. MRI and near-infrared images showed that the nanoparticles accumulate in the tumor after intravenous or intraperitoneal administration. Both routes benefit from MRI-guided PTT and demonstrate the multimodal theranostic applications for cancer therapy.

Near Infrared Biomimetic Hybrid Magnetic Nanocarrier for MRI-Guided Thermal Therapy.

Cell-membrane hybrid nanoparticles (NPs) are designed to improve drug delivery, thermal therapy, and immunotherapy for several diseases. Here, we report the development of distinct biomimetic magnetic nanocarriers containing magnetic nanoparticles encapsulated in vesicles and IR780 near-infrared dyes incorporated in the membranes. Distinct cell membranes are investigated, red blood cell (RBC), melanoma (B16F10), and glioblastoma (GL261). Hybrid nanocarriers containing synthetic lipids and a cell membrane are designed. The biomedical applications of several systems are compared. The inorganic nanoparticle consisted of Mn-ferrite nanoparticles with a core diameter of 15 ± 4 nm. TEM images show many multicore nanostructures (∼40 nm), which correlate with the hydrodynamic size. Ultrahigh transverse relaxivity values are reported for the magnetic NPs, 746 mM-1s-1, decreasing respectively to 445 mM-1s-1 and 278 mM-1s-1 for the B16F10 and GL261 hybrid vesicles. The ratio of relaxivities r2/r1 decreased with the higher encapsulation of NPs and increased for the biomimetic liposomes. Therapeutic temperatures are achieved by both, magnetic nanoparticle hyperthermia and photothermal therapy. Photothermal conversion efficiency ∼25-30% are reported. Cell culture revealed lower wrapping times for the biomimetic vesicles. In vivo experiments with distinct routes of nanoparticle administration were investigated. Intratumoral injection proved the nanoparticle-mediated PTT efficiency. MRI and near-infrared images showed that the nanoparticles accumulate in the tumor after intravenous or intraperitoneal administration. Both routes benefit from MRI-guided PTT and demonstrate the multimodal theranostic applications for cancer therapy.

Hypolipidemic activity of phytochemical combinations: A mechanistic review of preclinical and clinical studies

Hyperlipidemia, a condition characterized by elevated levels of lipids in the blood, poses a significant risk factor for various health disorders, notably cardiovascular diseases. Phytochemical compounds are promising alternatives to the current lipid-lowering drugs, which cause many undesirable effects. Based on in vivo and clinical studies, combining phytochemicals with other phytochemicals, prebiotics, and probiotics and their encapsulation in nanoparticles is more safe and effective for managing hyperlipidemia than monotherapy. To this end, the results obtained and the mechanisms of action of these combinations were examined in detail in this review.

Pectin Film Fortified with Zein Nanoparticles and Fe3+-Encapsulated Propolis Extract for Enhanced Fruit Preservation

In this study, pectin served as the film matrix while propolis extract (PPE) acted as both an antibacterial agent and antioxidant. Utilizing the encapsulation of zein nanoparticles and cross-linking of Fe3+ with pectin molecules, a dual encapsulation system of PPE in the pectin film was successfully achieved, resulting in antibacterial and antioxidant pectin films. The effects of incorporating PPE, zein, and Fe3+ on various properties of the pectin films were investigated. Additionally, the impact of zein nanoparticle encapsulation and Fe3+ dual encapsulation systems on the release characteristics of PPE in the pectin films was examined. Characterization techniques including FTIR, SEM, XRD crystal diffraction, and thermogravimetric analysis were employed to analyze the interactions, microstructure, crystal structure, and thermal stability of the films. The results showed that the double cross-linking of zein and Fe3+ led to a reduction in the moisture content of the pectin film by approximately 46%, a decrease in water vapor permeability by about 19%, an almost doubling of tensile strength and antioxidant activity, and a significant improvement in antibacterial properties. Additionally, the incorporation of zein and Fe3+ enhanced the release characteristics of PPE in the pectin films. Notably, the developed composite coating demonstrated improved preservation properties during the storage of strawberry fruits.

Pectin film fortified with zein nanoparticles and Fe3+-Encapsulated propolis extract for enhanced fruit preservation

In this study, pectin served as the film matrix while propolis extract (PPE) acted as both an antibacterial agent and antioxidant. Utilizing the encapsulation of zein nanoparticles and cross-linking of Fe3+ with pectin molecules, a dual encapsulation system of PPE in the pectin film was successfully achieved, resulting in antibacterial and antioxidant pectin films. The effects of incorporating PPE, zein, and Fe3+ on various properties of the pectin films were investigated. Additionally, the impact of zein nanoparticle encapsulation and Fe3+ dual encapsulation systems on the release characteristics of PPE in the pectin films was examined. Characterization techniques including FTIR, SEM, XRD crystal diffraction, and thermogravimetric analysis were employed to analyze the interactions, microstructure, crystal structure, and thermal stability of the films. The results showed that the double cross-linking of zein and Fe3+ led to a reduction in the moisture content of the pectin film by approximately 46%, a decrease in water vapor permeability by about 19%, an almost doubling of tensile strength and antioxidant activity, and a significant improvement in antibacterial properties. Additionally, the incorporation of zein and Fe3+ enhanced the release characteristics of PPE in the pectin films. Notably, the developed composite coating demonstrated improved preservation properties during the storage of strawberry fruits.

Biodegradation by Cancer Cells of Magnetite Nanoflowers with and without Encapsulation in PS-b-PAA Block Copolymer Micelles.

Magnetomicelles were produced by the self-assembly of magnetite iron oxide nanoflowers and the amphiphilic poly(styrene)-b-poly(acrylic acid) block copolymer to deliver a multifunctional theranostic agent. Their bioprocessing by cancer cells was investigated in a three-dimensional spheroid model over a 13-day period and compared with nonencapsulated magnetic nanoflowers. A degradation process was identified and monitored at various scales, exploiting different physicochemical fingerprints. At a collective level, measurements were conducted using magnetic, photothermal, and magnetic resonance imaging techniques. At the nanoscale, transmission electron microscopy was employed to identify the morphological integrity of the structures, and X-ray absorption spectroscopy was used to analyze the degradation at the crystalline phase and chemical levels. All of these measurements converge to demonstrate that the encapsulation of magnetic nanoparticles in micelles effectively mitigates their degradation compared to individual nonencapsulated magnetic nanoflowers. This protective effect consequently resulted in better maintenance of their therapeutic photothermal potential. The structural degradation of magnetomicelles occurred through the formation of an oxidized iron phase in ferritin from the magnetic nanoparticles, leaving behind empty spherical polymeric ghost shells. These results underscore the significance of encapsulation of iron oxides in micelles in preserving nanomaterial integrity and regulating degradation, even under challenging physicochemical conditions within cancer cells.

Revolutionizing Cardiovascular Health with Nano Encapsulated Omega-3 Fatty Acids: A Nano-Solution Approach.

Omega-3 polyunsaturated fatty acids (ω-3 PUFAs) offer diverse health benefits, such as supporting cardiovascular health, improving cognitive function, promoting joint and musculoskeletal health, and contributing to healthy aging. Despite their advantages, challenges like oxidation susceptibility, low bioavailability, and potential adverse effects at high doses persist. Nanoparticle encapsulation emerges as a promising avenue to address these limitations while preserving stability, enhanced bioavailability, and controlled release. This comprehensive review explores the therapeutic roles of omega-3 fatty acids, critically appraising their shortcomings and delving into modern encapsulation strategies. Furthermore, it explores the potential advantages of metal-organic framework nanoparticles (MOF NPs) compared to other commonly utilized nanoparticles in improving the therapeutic effectiveness of omega-3 fatty acids within drug delivery systems (DDSs). Additionally, it outlines future research directions to fully exploit the therapeutic benefits of these encapsulated omega-3 formulations for cardiovascular disease treatment.

Simple, and highly efficient edge-effect surface acoustic wave atomizer

Conventional surface acoustic wave (SAW) atomizers require a direct water supply on the surface, which can be complex and cumbersome. This paper presents a novel SAW atomizer that uses lateral acoustic wetting to achieve atomization without a direct water supply. The device works by simply pressing a piece of wetted paper strip against the bottom of an excited piezoelectric transducer. The liquid then flows along the side to the unmodified surface edge, where it is atomized into a well-converging mist in a stable and sustainable manner. We identified this phenomenon as the edge effect, using numerical simulation results of surface displacement mode. The feasibility of the prototype design was demonstrated by observing and investigating the integrated process of liquid extraction, transport, and atomization. We further explored the hydrodynamic principles of the change and breakup in liquid film geometry under different input powers. Experiments demonstrate that our atomizer is capable of generating high-quality fine liquid particles stably and rapidly even at very high input power. Compared to conventional SAW atomizer, the dispersion of mist width can be scaled down by 70%, while the atomization rate can be increased by 37.5%. Combined with the advantages of easy installation and robustness, the edge effect-based atomizer offers an attractive alternative to current counterparts for applications requiring high efficiency and miniaturization, such as simultaneous synthesis and encapsulation of nanoparticles, pulmonary drug delivery and portable inhalation therapy.

Optimization, characterization and evaluation of sodium alginate nanoparticles for Ganoderic acid DM encapsulation: Inhibitory activity on tyrosinase activity and melanin formation

The efficacy of nanoencapsulation as a technology for enhancing the solubility of active substances has been demonstrated. In this particular investigation, Ganoderic acid DM (GA-DM) was encapsulated within sodium alginate nanoparticles (NPs) using the ionic crosslinking method. The confirmation of the successful loading of GA-DM was ascertained through the analysis of Fourier transform infrared spectrum (FTIR). Empirical evidence derived from the examination of scanning electron microscope (SEM) images, transmission electron microscope (TEM) images, atomic force microscope (AFM) images, and dynamic light scattering (DLS) demonstrated a regular distribution and spherical morphology, with an average particle size of approximately 133 nm. The investigation yielded an encapsulation efficiency of 95.27 ± 0.11 % and a drug loading efficiency of 21.17 ± 0.02 % for the prepared sample. The release kinetics of SGPN was fitted with the Korsmeyer-Peppas kinetic model corresponding to diffusion-controlled release. The incorporation of GA-DM into sodium alginate nanocarriers exhibited a mitigating effect on the cytotoxicity of HaCat and B16, while also demonstrating inhibitory properties against tyrosinase activity and melanin formation.

Metal-acid synergistic catalysis accelerates the hydrogen borrowing amination of alcohols by confining Ru sites in Beta zeolite

Direct hydrogen transfer amination of alcohols with amines is an environmentally friendly and atom-economical route for the synthesis of N-alkylamines. Noble metal species are highly catalytic active sites, but the exorbitant price makes the urgency to boost the atom efficiency with stable recyclability. Herein, we demonstrated that encapsulation of Ru nanoparticles (NPs) within BEA zeolite through direct hydrothermal approach greatly promoted the catalytic efficiency in the N-alkylation of aromatic alcohols and amines under additive- and solvent-free conditions, resulting in the high yield (∼93 %), maximum turnover number (TON) of 12,822 and turnover frequency (TOF) of 9012 h−1, with stable recyclability and extendable substrate scope. The kinetic studies and in-situ characterizations revealed that the synergy of confined Ru NPs and adjacent acid sites of BEA zeolite significantly promoted the C–H bond activation in the rate-determining step of alcohol dehydrogenation into aldehydes. Besides, the acid sites also accelerated the condensation of aldehyde intermediates and anilines to promote the kinetic equilibrium, while the moderate strength of the Ru–H bond resulting from the confined Ru NPs is advantageous to balance the dehydrogenation and hydrogenation steps to reach the fascinating H-transfer process.

N-doped C encapsulated Li2TiSiO5 nanoparticles for high-rate highly stable lithium storage

Achieving high charging rates (≤ 15 min) in lithium-ion batteries (LIBs) is imperative for their widespread implementation in all-electric vehicles. However, the pursuit of elevated charging rates often leads to compromises in capacity and cycling stability. In this manuscript, we present a groundbreaking approach utilizing a composite material composed of nitrogen-doped carbon-encapsulated Li2TiSiO5 nanoparticles (LTSO@C-N) as the anode material for LIBs, offering rapid and exceptionally stable lithium storage. The encapsulation of Li2TiSiO5 nanoparticles by nitrogen-doped carbon is realized via a facile liquid-phase polymerization and the following pyrolysis route. The uniformly deposited nitrogen-doped carbon layer on the surface of Li2TiSiO5 nanoparticles within LTSO@C-N serves a dual purpose: enhancing the conductive properties of Li2TiSiO5 to ensure efficient charge transfer and Li+ transport, while concurrently inhibiting grain pulverization over extended cycling periods. The deliberate incorporation of nitrogen-doped carbon optimizes Li2TiSiO5 anode electrochemical performance, simultaneously reducing structural degradation during prolonged cycling. This enhances the lithium-ion battery system's long-term stability and reliability. While exhibiting an average operational potential of approximately 0.28 V in comparison to Li+/Li, the LTSO@C-N electrode manifests a commendable specific capacity of 345 mAh g-1 at a current density of 0.1 A g-1. Notably, it attains a robust lithium storage capability even under high-rate conditions, exemplified by a sustained capacity of 205 mAh g-1 over 1000 cycles at 2 A g-1, devoid of any discernible decay. The electrode's impressive electrochemical performance highlights its potential as an advanced anode for high-performance lithium-ion batteries, ensuring stability.

Promoting tissue repair using deferoxamine nanoparticles loaded biomimetic gelatin/HA composite hydrogel

To effectively address underlying issues and enhance the healing process of hard-to-treat soft tissue defects, innovative therapeutic approaches are required. One promising strategy involves the incorporation of bioactive substances into biodegradable scaffolds to facilitate synergistic tissue regeneration, particularly in vascular regeneration. In this study, we introduce a composite hydrogel design that mimics the extracellular matrix by covalently combining gelatin and hyaluronic acid (HA), with the encapsulation of deferoxamine nanoparticles (DFO NPs) for potential tissue regeneration applications. Crosslinked hydrogels were fabricated by controlling the ratio of HA in the gelatin-based hydrogels, resulting in improved mechanical properties, enhanced degradation ability, and optimised porosity, compared with hydrogel formed by gelatin alone. The DFO NPs, synthesized using a double emulsion method with poly (D,L-lactide-co-glycolide acid), exhibited a sustained release of DFO over 12 d. Encapsulating the DFO NPs in the hydrogel enabled controlled release over 15 d. The DFO NPs, composite hydrogel, and the DFO NPs loaded hydrogel exhibited excellent cytocompatibility and promoted cell proliferation in vitro. Subcutaneous implantation of the composite hydrogel and the DFO NPs loaded hydrogel demonstrated biodegradability, tissue integration, and no obvious adverse effects, evidenced by histological analysis. Furthermore, the DFO NPs loaded composite hydrogel exhibited accelerated wound closure and promoted neovascularisation and granular formation when tested in an excisional skin wound model in mice. These findings highlight the potential of our composite hydrogel system for promoting the faster healing of diabetes-induced skin wounds and oral lesions through its ability to modulate tissue regeneration processes.

Encapsulation of Nanoparticles with Statistical Copolymers with Different Surface Charges and Analysis of Their Interactions with Proteins and Cells.

Encapsulation with polymers is a well-known strategy to stabilize and functionalize nanomaterials and tune their physicochemical properties. Amphiphilic copolymers are promising in this context, but their structural diversity and complexity also make understanding and predicting their behavior challenging. This is particularly the case in complex media which are relevant for intended applications in medicine and nanobiotechnology. Here, we studied the encapsulation of gold nanoparticles and quantum dots with amphiphilic copolymers differing in their charge and molecular structure. Protein adsorption to the nanoconjugates was studied with fluorescence correlation spectroscopy, and their surface activity was studied with dynamic interfacial tensiometry. Encapsulation of the nanoparticles without affecting their characteristic properties was possible with all tested polymers and provided good stabilization. However, the interaction with proteins and cells significantly depended on structural details. We identified statistical copolymers providing strongly reduced protein adsorption and low unspecific cellular uptake. Interestingly, different zwitterionic amphiphilic copolymers showed substantial differences in their resulting bio-repulsive properties. Among the polymers tested herein, statistical copolymers with sulfobetaine and phosphatidylcholine sidechains performed better than copolymers with carboxylic acid- and dimethylamino-terminated sidechains.

Magnetic targeting and pH-microwave dual responsive Janus mesoporous silica nanoparticles for drug encapsulation and delivery

In this paper, a new Janus-structured nano drug delivery carrier Fe3O4@TiO2&mSiO2 was designed and synthesized, which consisted of a spherical head and a closely connected rod. The head was a nanocomposite of core/shell structure with magnetic spinel ferric tetraoxide core and anatase titanium dioxide shell (Fe3O4@TiO2), and the rod was ordered mesoporous silica (mSiO2). The nanocarriers showed excellent magnetic targeting capability (saturation magnetization, 25.18 emu g−1). The core/shell heads endowed the carriers with fine microwave responsiveness. The pore volume of mesoporous nanocarriers was 0.101 cm3 g−1, and the specific surface area was 489.0 m2 g−1. Anticancer drug doxorubicin could be loaded in the mesoporous of the carriers to form Fe3O4@TiO2&mSiO2-DOX. The drug loading capacity was 10.4%. Fe3O4@TiO2&mSiO2-DOX exhibited acid-sensitive and microwave-sensitive release properties along with good bio-compatibility. Fe3O4@TiO2&mSiO2 Janus nanoparticles are expected to be ideal drug carriers.

Development and characterization of lipid nanocapsules loaded with iron oxide nanoparticles for magnetic targeting to the blood-brain barrier.

Brain drug delivery is severely hindered by the presence of the blood-brain barrier (BBB). Its functionality relies on the interactions of the brain endothelial cells with additional cellular constituents, including pericytes, astrocytes, neurons, or microglia. To boost brain drug delivery, nanomedicines have been designed to exploit distinct delivery strategies, including magnetically driven nanocarriers as a form of external physical targeting to the BBB. Herein, a lipid-based magnetic nanocarrier prepared by a low-energy method is first described. Magnetic nanocapsules with a hydrodynamic diameter of 256.7 ± 8.5nm (polydispersity index: 0.089 ± 0.034) and a ξ-potential of -30.4 ± 0.3mV were obtained. Transmission electron microscopy-energy dispersive X-ray spectroscopy analysis revealed efficient encapsulation of iron oxide nanoparticles within the oily core of the nanocapsules. Both thermogravimetric analysis and phenanthroline-based colorimetric assay showed that the iron oxide percentage in the final formulation was 12 wt.%, in agreement with vibrating sample magnetometry analysis, as the specific saturation magnetization of the magnetic nanocapsules was 12% that of the bare iron oxide nanoparticles. Magnetic nanocapsules were non-toxic in the range of 50-300μg/mL over 72h against both the human cerebral endothelial hCMEC/D3 and Human Brain Vascular Pericytes cell lines. Interestingly, higher uptake of magnetic nanocapsules in both cell types was evidenced in the presence of an external magnetic field than in the absence of it after 24h. This increase in nanocapsules uptake was also evidenced in pericytes after only 3h. Altogether, these results highlight the potential for magnetic targeting to the BBB of our formulation.

Synthesis and Properties of a Strained Triple Nanohoop.

A strained triple nanohoop with a shared central benzene unit is synthesized using a threefold intramolecular ring-closing approach. Among the five possible constitutional isomers, the isomer with the highest D3h symmetry is isolated, the structure of which contains three nanohoop blades and a central hexaphenylbenzene unit. The structure is elucidated using NMR spectroscopy and mass spectrometry. The optical and electrochemical properties are investigated, revealing a moderate fluorescence quantum yield of 40 %. A water-soluble nanomaterial is prepared using a nanoparticle encapsulation method, and a fluorescence quantum yield of 10 % is retained, which demonstrates the potential of the nanomaterial in biological systems.

Fabrication and Optimization of Pickering Emulsion Stabilized by Lignin Nanoparticles for Curcumin Encapsulation.

To develop reversible pH-responsive emulsifiers of natural origin, alkali lignin (AL) was used to develop oil-in-water Pickering emulsions. AL was first modified to synthesize quaternized alkali lignin (QAL), which displayed pH-responsive properties and demonstrated solubility in both acidic and alkaline solutions. In contrast, QAL exhibited insolubility and formed particles in neutral solutions, thereby making it a suitable candidate for utilization as an emulsifier in doubly pH-responsive Pickering emulsions. At pH 5-9, the emulsions were stable. Above or below this pH range, the system demulsifies, resulting in a reversible Pickering emulsifier with two pH-controlled transitions. On the basis of this pH-dependent behavior, lignin-based Pickering emulsions (LPE) could be subjected to several cycles of emulsification-demulsification by alternating the pH of the aqueous phase between basic and acidic, while the droplet size and storage stability were maintained. Curcumin was used as a drug model to study the loading/release behavior of LPE, finding that 50.08% of curcumin could be encapsulated in LPE. The in vitro release of curcumin was pH-dependent. In addition, LPE exhibited an outstanding protective effect against the ultraviolet-induced degradation of curcumin.

In Situ Encapsulation of Cobalt Selenide Nanoparticles in N-Doped Carbon Nanotubes with a Full Sulfiphilic Surface as a Catalytic Interlayer for Lithium–Sulfur Batteries

In Situ Encapsulation of Cobalt Selenide Nanoparticles in N-Doped Carbon Nanotubes with a Full Sulfiphilic Surface as a Catalytic Interlayer for Lithium–Sulfur Batteries

Donor-Acceptor Modulating of Ionic AIE Photosensitizers for Enhanced ROS Generation and NIR-II Emission.

Photosensitizers (PSs) with aggregation-induced emission (AIE) characteristics are competitive candidates for bioimaging and therapeutic applications. However, their short emission wavelength and nonspecific organelle targeting hinder their therapeutic effectiveness. Herein, a donor-acceptor modulation approach is reported to construct a series of ionic AIE photosensitizers with enhanced photodynamic therapy (PDT) outcomes and fluorescent emission in the second near-infrared (NIR-II) window. By employing dithieno[3,2-b:2',3'-d]pyrrole (DTP) and indolium (In) as the strong donor and acceptor, respectively, the compound DTP-In exhibits a substantial redshift in absorption and fluorescent emission reach to NIR-II region. The reduced energy gap between singlet and triplet states in DTP-In also increases the reactive oxygen species (ROS) generation rate. Further, DTP-In can self-assemble in aqueous solutions, forming positively charged nanoaggregates, which are superior to conventional encapsulated nanoparticles in cellular uptake and mitochondrial targeting. Consequently, DTP-In aggregates show efficient photodynamic ablation of 4T1 cancer cells and outstanding tumor theranostic in vivo under 660nm laser irradiation. This work highlights the potential of molecular engineering of donor-acceptor AIE PSs with multiple functionalities, thereby facilitating the development of more effective strategies for cancer therapy.