The biopolymer material, lignin, was recovered from the black liquor by acidification of the black liquor using sulfuric acid. Several purification techniques were carried out to produce the high purity of lignin such as gradual precipitation of lignin from black liquor (first stage: precipitation at pH 7, second stage: precipitation at pH 2) and the diluting of crude lignin by sodium hydroxide then followed by re-precipitation at different temperature. Subsequently, the impurities of lignin product resulted from each purification techniques was determined as ash content that analyzed using temperature program furnace; and the content of lignin was investigated using spectrophotometer UV-Vis. The result showed that the content of lignin of material produced from gradual precipitation was approximately 77.6%. It was higher than the content of lignin about 3.4% of material produced from direct precipitation to pH 2. In addition, the elevating of temperature from 40 to 60°C was no considerably affect to the content of lignin in precipitate produced from re-precipitation of crude lignin solution in sodium hydroxide. Nonetheless, the content of lignin of precipitate improved 15% when the temperature of re-precipitation of crude lignin solution in sodium hydroxide was raised from room temperature to 40-60°C.