Elliptical Structure Research Articles

Synthesis of π-Extended [1.1]Paracyclophanes, [1.1][n]PCP (n=2, 3, and 4), and Their Through-Space Conjugation.

[1.1][n]Paracyclophanes ([1.1][n]PCPs) (3) with n=2, 3, and 4, which consist of two [n]paraphenylene units connected by methylene bridges, were synthesized using short synthetic pathways with good overall yields. Single-crystal X-ray diffraction analyses reveal that the paraphenylene unit in 3 is bent, resulting in an elliptic core structure of 3. The facing bridgehead carbons of the paraphenylene units are separated by a distance much shorter than the sum of the van der Waals radii of sp2-carbon atoms. UV-vis absorption spectra, fluorescence spectra, electrochemical measurements, and theoretical calculations were used to demonstrate the presence of through-space (TS) conjugation in 3. Furthermore, host-guest complex formation between 3D (n=3) and tetracyanoquinodimethane in the solid state was revealed.

Design and investigation of UWB antenna with triple notched band for 5G wireless communication

ABSTRACT Two novel antennas are presented in this article. UWB and UWB antenna with triple notched band are designed using an elliptical array structure. To improve the gain and the impedance bandwidth, a new methodology for optimization of an elliptical array UWB antenna with an uncentered feedline model is presented. Based on the Response Surface Modelling, two parameters (Wopt1 and Wopt2) control the return loss of UWB antenna. The mathematical models of S11 is developed using non-regression analysis, and this antenna can be used for various applications such as Wi-Fi, 5 G, 4 G LTE, X-Band application, C-Band application. The band rejection technique is implemented to designed triple notched UWB antenna to reduce the cost of the UWB channel. The first band (2–3 GHz) is rejected by embedding a rectangular stub on the modified partial ground plane on UWB antenna. By etching a three rectangular slot on the elliptical array radiator, two notched bands 2–3 GHz and 5–6 GHz bands are rejected. By embedding two arcs on the elliptical array radiator, triple interfacing bands 2–3 GHz, 5–6 GHz, and 7.8–8.4 GHz are rejected. Two proposed antennas are designed using FR4 substrate and fabricated and verified experimentally. This antenna offers excellent performance and is well-suited for 5 G wireless communications.

Design of a compact quad-port wideband printed MIMO antenna for vehicular communication environment

ABSTRACT A wideband quad-port Multiple Input Multiple Output (MIMO) antenna with efficient isolation characteristics for 5 G New Radio (5 G-NR) applications is presented. The proposed antenna works in the span of 3–6 GHz frequency covering the n77/n78/n79 bands also covering the 5 G-V2X band (3300–5000 MHz), LTE-46 band (5150–5925 MHz) and Dedicated Short Range Communication (DSRC) at 5.9 GHz band. The single element of the MIMO antenna structure is modelled by an elliptical structure stacked on a rectangular patch along with the feedline on the conducting plane. The ground plane is modelled as a rhombic design providing a Defected Ground Structure (DGS) to provide the resonance at the desired frequency band. Later, the antenna is evolved as a four-element MIMO system by arranging the antenna elements orthogonal to each other with a distance of separation between the adjacent antenna elements considered to be 10 mm. The all-inclusive dimension of the proposed antenna is 65 × 65 mm2. The simulated MIMO structure is fabricated and measured for antenna parameters and MIMO parameters such as isolation characteristics and MIMO diversity performances. The simulated values are obtained at acceptable limits with the measured values for the proposed wideband frequency range of operation. The compact, wideband antenna is found to be suitable for various 5 G-NR applications, especially Wi-Fi-assisted Vehicular Communication in the sub-6 GHz frequency range.

Comparative investigation of exosome extraction from rat bone marrow mesenchymal stem cells using three different methodologies

AbstractExosomes have been identified as crucial mediators in numerous physiological and pathological processes, emerging as a focal point of scientific inquiry. This study aims to compare three methods for isolating exosomes from rat bone marrow mesenchymal stem cells: ultracentrifugation (UC), ultrafast separation system (EXODUS), and commercial precipitation kit (EXO‐kit). First, the investigation compared exosomal morphology, particle size distribution, and expression of marker proteins. Subsequently, the RNA content, protein concentration, and purity of exosomes were evaluated. Finally, the impact of these exosomes on cellular metabolic viability and migration capacity was assessed. Results indicated that exosomes exhibited spherical or elliptical membrane structures, and most of the exosomes extracted by the three methods were in the range of 30to 200 nm. UC‐extracted exosomes demonstrated the least impurities and clearest background, followed by EXODUS‐extracted exosomes, and lastly EXO‐kit‐extracted exosomes. The EXO‐kit‐extracted exosomes yielded the highest RNA and protein content, whereas those isolated through UC exhibited superior purity. Furthermore, exosomes extracted from EXODUS and EXO‐kit methods effectively enhanced the metabolic viability and migratory ability of osteoblast precursor cells compared to UC‐extracted exosomes. In conclusion, each of the three methodologies presents advantages and limitations. Therefore, the selection of an appropriate exosome extraction technique should be based on specific experimental objectives and requirements.

Analysis of composite honeycomb sandwich panels under blast loads

ABSTRACT This paper presents a novel isogeometric model to analyze the static bending, fre, and forced vibration characteristics of a sandwich of two-layer plates made of auxetic honeycomb core and laminated three-phase polymer/GNP/fiber skin subjected to a double blast load. The two layers are restricted from vertical movement by elastic pins but they can still move in the horizontal plane. The unique feature of the refined first-order shear plate theory with a distribution function g(z) is used to replace the shear correction factor, thereby allowing the shear stress at the top and bottom surfaces to be accurately calculated. The results are derived by the exact Navier solutions for rectangular plates and the IGA method with arbitrary boundary conditions for elliptical and rectangular plate structures. A comprehensive investigation was conducted to evaluate the influence of some parameters on the oscillation of sandwich two-layer plates subjected to double blast load.

Study on the Flow and Heat Transfer Performance of Microchannel Heat Exchangers With Different Elliptical Concave Cavities

AbstractEllipticity has a significant impact on the flow and heat transfer performance of microchannel heat exchangers (MHEs) with elliptical concave cavities. In this study, five types of MHEs with different elliptical concave cavities (ellipticities of 0.4, 0.6, 0.8, 1.0, and 1.2) were designed. The influence of ellipticity on the flow and heat transfer performance of MHEs was numerically investigated using ANSYS Fluent 21.0 R1. Moreover, MHEs with corresponding elliptical concave cavities structures were processed and manufactured, and then an experimental platform was designed and built for experimental verification. The results showed that the fluid velocity distribution in MHEs with elliptical concave cavities was symmetrical, and the formation of secondary flow in the elliptical concave cavities led to the continuous destruction and reconstruction of the flow and thermal boundary layer in the microchannel, which is conducive to mass and heat transfer in the MHEs with elliptical concave cavities. The inlet and outlet pressure drop of MHEs with elliptical concave cavities increased as the inlet flow rate increased. At the same inlet flow rate, the inlet and outlet pressure drop of the MHE with elliptical concave cavities first increased and then decreased with increasing ellipticity. At an ellipticity of 1.0, the inlet and outlet of MHE exhibited the lowest pressure drop indicating that the MHE with an ellipticity of 1.0 featured the highest pressure drop performance. The cold‐water outlet temperature of the MHEs with elliptical concave cavities first decreased and then increased as the inlet flow rate increased. At the same inlet flow rate, the cold‐water outlet temperature of the MHEs with elliptical concave cavities first increased and then decreased with increasing ellipticity, while the hot‐water outlet temperature of the MHEs first decreased and then increased with increasing flow rate. This indicated that the MHE with an ellipticity of 1.0 exhibited excellent heat transfer performance.

Terahertz bandpass and bandstop filter based on the babinet complementary metamaterials

In this study, we experimentally investigate the terahertz (THz) bandpass and bandstop filters based on the elliptical Babinet complementary structure, including an elliptical hole structure (EHS) and an elliptical ring structure (ERS). The experimental results indicate that the monolayer structure exhibits an obvious polarization selectivity with consistent filtering curves under TE and TM mode excitation, but the spectral line has an apparent shift of 0.1 THz. Based on Babinet's principle, the filtering mode matching is experimentally verified between bandpass and bandstop under a 90° change in polarization. Furthermore, we propose a double-layer filter by integrating EHS and ERS on both sides of the silicon substrate, and realize the bandpass and bandstop filtering simultaneously. The simulation results show that the isolation degree of bandpass and bandstop filtering has a maximum of nearly 40 dB based on the angle-tunable filtering performance, and the Q-value of the filter is further improved than that of the single-layer structure. The filter designed based on the Babinet principle has the advantages of simple structure, easy processing, and sharper filtering effect, and shows great applications in THz communication, imaging, and sensing systems.

Effects of air gap eccentricity on different rotor structures for PMSM in electric vehicles

In addition to research related to static eccentricity and dynamic eccentricity examining fault and diagnostic methods in various types of motors, there are also studies conducted for motors with non-uniform air gaps similar to the condition. In these studies, improvements and changes in motor performance for such types of motors can be observed. In this study, the effects of the rotor structures determined in the study and the air gap shape, which is effective by changing the eccentricity ratio, on the motor performance of the interior permanent magnet synchronous motor designed for electric vehicle applications are examined. Besides the elliptical rotor structure, which is widely researched in dynamic eccentricity studies, these eccentric motor structures also include novel rectangular and polygonal eccentric rotor structures. Motor models with non-uniform air gap structures are designed in two dimensions and subjected to simulation and analysis studies using the finite element method. At the end of the study, along with the parameters identified for motor performance, the harmonic components of the stator current, radial air gap flux density and the output torque obtained through Fast Fourier Transform analysis have been provided.

Compressive Behavior of Novel Additively Manufactured Ti-6Al-4V Lattice Structures: Experimental and Numerical Studies.

This paper presents novel configurations for additively manufactured lattice structures, including helical and elliptic designs, in addition to the pyramid base model. Functionally graded versions of the pyramid and elliptic lattice structures are developed by considering desirable relative densities in each layer. The lattice structures were manufactured using Ti-6Al-4V powder in a three-dimensional selective laser melting printer. The averaged porosities are 0.86, 0.91, 0.916, 0.93 and 0.74 for pyramid, functionally graded pyramid, elliptic, functionally graded elliptic and helical, respectively. The mechanical behavior of the lattice structures was characterized through compression tests using a universal testing machine and computationally analyzed using finite element code. The results indicate that the elliptic and functionally graded elliptic lattices have elastic moduli of 0.76 and 0.67 GPa, while the yield strengths are 41.32 and 32.24 MPa, respectively, in comparison to cancellous bone. Moreover, pyramid, functionally graded pyramid, and helical lattices show relatively lower elastic moduli of 0.57, 0.65 and 0.41 GPa and higher yield strengths of 54.1, 52.15 and 61.02 MPa, respectively. This could be an indication that they are fit for cortical bones. All samples have low elastic moduli coupled with high yield strengths. This could reduce or eliminate stress shielding, making them suitable for some load-bearing bio-inspired applications. A comparative study utilizing experimental and numerical models was conducted to evaluate the performance of the proposed designs.

Dynamics modeling and fault diagnosis of flexible thin-walled elliptical bearings in harmonic reducers

Harmonic reducers, crucial in industrial robots for their high load capacity and low friction, often rely on Flexible Thin-Walled Bearings (FTWBs). However, these bearings are particularly prone to failure due to the cyclic alternating stress loads they experience, stemming from their unique elliptical structure. This study presents a dynamic model for the Flexible Thin-Walled Bearing (FTWB) using a finite element approach. Stress distribution and motion characteristics were analyzed, revealing maximum stress at major and minor axis positions during operation. The model was tested under three conditions: normal, outer ring fault, and inner ring fault. A vibration test rig was constructed to gather real vibration signals, enabling model validation and analysis of vibration signal characteristics under different conditions. This research sheds light on the mechanisms of impact and fault signal generation in FTWBs, offering valuable insights for dynamic analysis and fault diagnosis in FTWBs and harmonic drives.

Formulation and Evaluation of Albumin-Stabilized Silver Nanoparticles Loaded with Methotrexate: Anticancer Activity and DNA Binding Analysis with Molecular Modeling

Nano-metal technology has emerged recently as an exceptional biological targeted field with numerous advantages like small size and high surface charge. In this report, we described our research on the stabilization of prepared silver nanocores coated with bovine serum albumin and further loaded with methotrexate (MTX) drug. The prepared nanoparticles were characterized by using UV-Visible, X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning electron microscopy (SEM) and cyclic voltammetry (CV). The UV spectra of AgNP showed a prominent peak at 400 nm. The presence of MTX was confirmed by the FT-IR and EDX analysis. The AgNP-BSA-MTX particles resembled elliptical shape like structures in the SEM images. In-vitro drug release for free drug MTX occurred rapidly in a period of 12 hrs (85%), whereas a sustained release of MTX greater than 85% from the AgNP-BSA-MTX nanoparticles was observed for 48 hrs. The AgNP-BSA-MTX demonstrated a five-fold higher cytotoxic activity compared to free MTX drug alone against PC-3 cell lines, performed by the 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay method. DNA binding studies were performed for the AgNP-BSA-MTX with calf thymus DNA (ct-DNA). In-silico studies were performed for MTX with DNA (Protein Data Bank ID-IZ3F) and a prominent interaction with the nucleotides was noted. Molecular Dynamics (MD) simulation studies were also performed for the docked MTX-DNA complex. The average of the Root mean square deviation (RMSD) values for the DNA backbone was calculated to be 5.71 ± 0.48 nm.

Advancements in diabetic foot insoles: a comprehensive review of design, manufacturing, and performance evaluation.

The escalating prevalence of diabetes has accentuated the significance of addressing the associated diabetic foot problem as a major public health concern. Effectively offloading plantar pressure stands out as a crucial factor in preventing diabetic foot complications. This review comprehensively examines the design, manufacturing, and evaluation strategies employed in the development of diabetic foot insoles. Furthermore, it offers innovative insights and guidance for enhancing their performance and facilitating clinical applications. Insoles designed with total contact customization, utilizing softer and highly absorbent materials, as well as incorporating elliptical porous structures or triply periodic minimal surface structures, prove to be more adept at preventing diabetic foot complications. Fused Deposition Modeling is commonly employed for manufacturing; however, due to limitations in printing complex structures, Selective Laser Sintering is recommended for intricate insole designs. Preceding clinical implementation, in silico and in vitro testing methodologies play a crucial role in thoroughly evaluating the pressure-offloading efficacy of these insoles. Future research directions include advancing inverse design through machine learning, exploring topology optimization for lightweight solutions, integrating flexible sensor configurations, and innovating new skin-like materials tailored for diabetic foot insoles. These endeavors aim to further propel the development and effectiveness of diabetic foot management strategies. Future research avenues should explore inverse design methodologies based on machine learning, topology optimization for lightweight structures, the integration of flexible sensors, and the development of novel skin-like materials specifically tailored for diabetic foot insoles. Advancements in these areas hold promise for further enhancing the effectiveness and applicability of diabetic foot prevention measures.

Osteon shape variation in the femoral diaphysis: A geometric-morphometric approach on human cortical bone microstructure in an elderly sample.

Geometric morphometrics (GMM) have been applied to understand morphological variation in biological structures. However, research studying cortical bone through geometric histomorphometrics (GHMM) is scarce. This research aims to develop a landmark-based GHMM protocol to depict osteonal shape variation in the femoral diaphysis, exploring the role of age and biomechanics in bone microstructure. Proximal, midshaft, and distal anatomical segments from the femoral diaphysis of six individuals were assessed, with 864 secondary intact osteons from eight periosteal sampling areas being manually landmarked. Observer error was tested using Procrustes ANOVA. Average osteonal shape and anatomical segment-specific variation were explored using principal component analysis. Osteon shape differences between segments were examined using canonical variate analysis (CVA). Sex differences were assessed through Procrustes ANOVA and discriminant function analysis (DFA). The impact of osteonal size on osteonal shape was investigated. High repeatability and reproducibility in osteon shape landmarking were reported. The average osteon shape captured was an elliptical structure, with PC1 reflecting more circular osteons. Significant differences in osteon shape were observed between proximal and distal segments according to CVA. Osteon shape differed between males and females, with DFA showing 52% cross-validation accuracies. No effect of size on shape was reported. Osteonal shape variation observed in this study might be explained by the elderly nature of the sample as well as biomechanical and physiological mechanisms playing different roles along the femoral diaphysis. Although a larger sample is needed to corroborate these findings, this study contributes to the best of our knowledge on human microanatomy, proposing a novel GHMM approach.

Late Devonian felsic magmatism in southern New Brunswick and its association with a large igneous province that may have contributed to the Frasnian-Famennian extinction

Felsic rocks of the Piskahegan Group and coeval plutons form a major part of a Late Paleozoic epicontinental caldera in southwestern New Brunswick, Canada. The caldera forms an elliptical structure with a length of ∼34 km and a width of ∼13 km. It hosts a significant polymetallic deposit of tin, molybdenum, indium and bismuth associated with mid-sequence granitic intrusions. The caldera formed in the aftermath of the late Early to Middle Devonian Acadian Orogeny during the opening of the late Paleozoic Maritimes Basin in the Northern Appalachian Belt. Its surrounding successions are largely composed of bimodal igneous rocks that were derived from two distinct sources: upper mantle-derived mafic magma and lower crust-derived felsic magma. The rocks that marked the beginning of volcanic activity in the caldera are no younger than 374.2 ± 2 Ma, whereas the uppermost dated volcanic unit in the complex yielded an age of 364.6 ± 0.7 Ma. The latter is conformably overlain by a succession of red beds and undated basalts that also overlie penecontemporaneous felsic volcanic rocks adjacent to the caldera. The post-orogenic felsic rocks are fractionated, peraluminous A-2 type rocks with silica contents ranging from ∼70 to ∼79 wt% along with high K2O contents and ɛNd(t) ranging from −0.10 to +1.05. They were generated by the melting of lower crustal basement rocks linked to a lithospheric plate that was metasomatized during the Neoproterozoic. Based on available geochemical, geophysical and structural data on Late Paleozoic rocks of southeastern Canada, the melting may have been triggered by the injection of profuse mafic magma that eventually formed a thick underplating at the base of the crust in association with heat derived from an underlying mantle plume and conveyed by transtensional structures. Basal rocks of the Piskahegan Group (the Intracaldera Sequence) and penecontemporaneous volcanic rocks in Nova Scotia are interpreted as small erosional remnants of a Large Igneous Province (LIP) based on the extensive exposure of large coeval plutons throughout southeastern Canada. The new geochronological data suggests that profuse late Frasnian magmatism in this LIP could have contributed to the environmental deterioration that led to a significant extinction at the Frasnian-Famennian boundary (the Kellwasser Event).

Numerous bidirectionally propagating plasma blobs near the reconnection site of a solar eruption

A current sheet is a common structure involved in solar eruptions. However, it is observed in a minority of the events, and the physical properties of its fine structures during a solar eruption are rarely investigated. Here, we report an on-disk observation that displays 108 compact, circular, or elliptic bright structures, presumably plasma blobs, propagating bidirectionally along a flare current sheet during a period of ∼24 min. Using extreme ultraviolet images, we investigated the temporal variation of the blob number around the flare’s peak time. The current sheet connects the flare loops and the erupting filament. The width, duration, projected velocity, temperature, and density of these blobs are ∼1.7 ± 0.5 Mm, ∼79 ± 57 s, ∼191 ± 81 km s−1, ∼106.4 ± 0.1 K, and ∼1010.1 ± 0.3 cm−3, respectively. The reconnection site rises with a velocity of ≤69 km s−1. The observational results suggest that plasmoid instability plays an important role in the energy-release process of solar eruptions.

Enhancing multi-channel electrode structures in ceramic fuel cells: Influence of channel geometry on mass transport and electrochemical performance

Solid oxide fuel cell (SOFC) is a promising electrochemical power generation technology that contributes to the decarbonization of the energy field. The electrode-supported design enables the use of thinner electrolytes, but inevitably brings additional gas diffusion resistance, which in turn leads to higher anodic concentration polarization. Therefore, additional structural design of the electrodes is necessary to ensure efficient operation and mass transport resistance minimization. In this study, anode-supported micro-tubular SOFCs with different multi-channel geometries have been attempted, during which samples with 4 channels exhibit unique elliptical structure due to meticulous manipulation. In addition, the 4-channel samples have been compared to the single-channel and 7-channel counterparts, exploring the influential mechanism of the anode micro-structure on gas transfer and electrochemical performances. The study found that the 4-channel cell has the best geometric controllability, with its minimum gas diffusion path reduced to below 50 μm, such thin electrochemical active region (EAR) accounts for >50 % of the entire external surface. Efficient utilization of the geometric surface area considerably facilitates the fuel transport to reach anode/electrolyte interface. By enhancing the mass transport efficiency, the maximum power density of the 4-channel cell reached 1.40 W cm−2 (750 °C), which is 22.8 % and 102.9 % higher than that of the 7-channel and single-channel cells under the same conditions. The highly efficient anode design additionally exhibited exceptional structural integrity and mechanical robustness, thereby ensuring the steady operation of the cell.

Enigmatic Discoid and Elliptical Structures from Brioverian (Ediacaran-Fortunian) Deposits of Brittany (Armorican Massif, NW of France)

Enigmatic Discoid and Elliptical Structures from Brioverian (Ediacaran-Fortunian) Deposits of Brittany (Armorican Massif, NW of France)

Topology optimization of an elliptical parabolic shell structure: effect of penalty factor and load type

Topology optimization of an elliptical parabolic shell structure: effect of penalty factor and load type

A flexible dual-band 4 × 4 MIMO antenna for 5G mm-wave 28/38 GHz wearable applications

This paper presents a novel, dual-band, four-port multi-input–multi-output (MIMO) antenna for 28/38 GHz millimeter wave 5G wearable applications. In the proposed work, we have used a novel design approach to get the dual-band behavior from a MIMO design with a small footprint of 18 × 8.5 × 0.25 mm3. For this purpose, each MIMO element is designed as a composite form of a circular and elliptical structure connected with a narrow strip and fed by a tapered feedline. The peak realized gains and total efficiencies of the antenna, evaluated in free space, are 4.15 dBi, 7.73 dBi and 80.13%, 85.44% at 28 GHz and 38 GHz frequencies, respectively. To appraise the thorough behavior of the MIMO antenna, we have evaluated all the parameters of the antenna: Envelope Correlation Coefficient (ECC), Diversity Gain (DG), Mean Effective Gain (MEG), Channel Capacity Loss (CCL), and Total Active Reflection Coefficient (TARC), and found them satisfactory. Channel capacity of the antenna at SNR = 20 dB is found to be 21.61 bps/Hz. For wearable applications, the proposed 4-port MIMO antenna is designed on a flexible Rogers 3003 substrate, and the performance is checked by evaluating bending analysis. The safety of the antenna is verified by analyzing the 1 g/10 g SAR at 28/38 GHz and the corresponding average SAR values are 0.11/0.08 W/kg and 0.05/0.04 W/kg, respectively. All the average SAR values for the proposed MIMO antenna are within the acceptable limits according to FCC/ICNIRP standards.

Anti-Resonant Hollow-Core Fibers with High Birefringence and Low Loss for Terahertz Propagation

A new type of anti-resonant hollow-core fiber for terahertz waveguides is proposed. By introducing central support pillars and an elliptical structure, the fiber achieves high birefringence while maintaining low confinement loss and low material absorption loss. The fiber structure is optimized through simulation using the finite element method. The optimized fiber exhibits a birefringence of up to 1.22 × 10−2 at a frequency of 1 THz, with a confinement loss of 8.34 × 10−6 dB/cm and a material absorption loss of 7.17 × 10−3 dB/cm. Furthermore, when the bending radius of the fiber is greater than 12 cm, the bending loss of the anti-resonant optical fiber at 1 THz is less than 1.36 × 10−4 dB/cm, demonstrating good bending resistance and high practical value. It is expected to play a significant role in optical communication systems.