Elevated Areas Research Articles

A new species of Centrozoros Kukalová-Peck & Peck, 1993 (Zoraptera: Spiralizoridae) from high elevations in the northwestern Andes of Colombia.

This study aims to expand the knowledge of angel insects in Colombia. A new species of Centrozoros Kukalová-Peck & Peck, 1993 (Zoraptera: Spiralizoridae) from a high elevation area of Colombia is described. Centrozoros mesenia Lima, Oliveira & Rafael sp. nov. was collected from Andean cloud forest at the Mesenia-Paramillo Nature Reserve. The new species is described based on a male specimen and is characterized mainly by the presence of a leaf-like sclerotized projection at the base of the aedeagus. We present digital images of the new species and a distribution map of the species of Zoraptera registered for Colombia until now.

Telescopic forklift selection through a novel interval-valued Fermatean fuzzy PIPRECIA–WISP approach

Telescopic forklifts stand apart from other forklift types, boasting numerous benefits. They offer notable advantages, such as enhanced manoeuvrability, accessibility to elevated areas, versatility, and the capacity to operate at high speeds. Choosing appropriate telescopic forklifts can substantially enhance operational efficiency and efficacy within the industry. Concurrently, it can bolster business competitiveness by expediting logistical processes, yielding notable cost reductions. Nonetheless, the intricacy and specificity inherent in these machines complicate the decision-making process for stakeholders. Furthermore, conflicting criteria, the continuous evolution of manufacturers’ models, and the industry’s intricate nature compound the selection challenges. Hence, there is a pressing need for a resilient, dependable, and practical decision-making framework capable of adeptly navigating uncertainties to yield reliable and coherent outcomes. This study aimed to develop an integrated decision-making model based on interval-valued Fermatean fuzzy (IVFF) sets to respond to these requirements and address this critical decision-making problem in the relevant industry, which is also significantly affected by complex uncertainties. This work, therefore, introduces an integrated methodology for decision-making, IVFF–PIPRECIA and IVFF–WISP techniques. IVFF–PIPRECIA determines criteria importance weights, whereas IVFF–WISP identifies optimal alternatives. A case study in the textile industry validates the framework’s practicality. Purchase price emerges as the primary criterion, exceeding 500 thousand euros for telescopic forklifts, followed closely by load-carrying capacity. The second alternative proves to be the best option. Comparative and sensitivity analyses confirm the model’s credibility. The approach effectively handles decision-making uncertainties, yielding competitive outcomes. It can be applied to diverse engineering problems. Insights from this study assist users in selecting optimal equipment and may inform forklift manufacturers in improving machinery. Future research could focus on establishing real-time operational data collection frameworks for these vehicles.

Interleukin-5 alleviates cardiac remodelling via the STAT3 pathway in angiotensin II-infused mice.

Interleukin-5 (IL-5) has been reported to be involved in cardiovascular diseases, such as atherosclerosis and cardiac injury. This study aimed to investigate the effects of IL-5 on cardiac remodelling. Mice were infused with angiotensin II (Ang II), and the expression and source of cardiac IL-5 were analysed. The results showed that cardiac IL-5 expression was time- and dose-dependently decreased after Ang II infusion, and was mainly derived from cardiac macrophages. Additionally, IL-5-knockout (IL-5-/-) mice were used to observe the effects of IL-5 knockout on Ang II-induced cardiac remodelling. We found knockout of IL-5 significantly increased the expression of cardiac hypertrophy markers, elevated myocardial cell cross-sectional areas and worsened cardiac dysfunction in Ang II-infused mice. IL-5 deletion also promoted M2 macrophage differentiation and exacerbated cardiac fibrosis. Furthermore, the effects of IL-5 deletion on cardiac remodelling was detected after the STAT3 pathway was inhibited by S31-201. The effects of IL-5 on cardiac remodelling and M2 macrophage differentiation were reversed by S31-201. Finally, the effects of IL-5 on macrophage differentiation and macrophage-related cardiac hypertrophy and fibrosis were analysed invitro. IL-5 knockout significantly increased the Ang II-induced mRNA expression of cardiac hypertrophy markers in myocardial cells that were co-cultured with macrophages, and this effect was reversed by S31-201. Similar trends in the mRNA levels of fibrosis markers were observed when cardiac fibroblasts and macrophages were co-cultured. In conclusions, IL-5 deficiency promote the differentiation of M2 macrophages by activating the STAT3 pathway, thereby exacerbating cardiac remodelling in Ang II-infused mice. IL-5 may be a potential target for the clinical prevention of cardiac remodelling.

Urban Metamorphosis: Enhancing Imageability through Vertical Hybrids

To create a vertical ecosystem of hybrid urban forms to enhance imageability. This paper proposes a transformativeapproach to elevate the imageability of cities through a fusion of innovative urban forms, vertical ecosystems, andsustainability principles. Drawing inspiration from theories of vertical urbanism and universal design, the researchemphasizes the strategic utilization of vertical space to optimize land use in densely populated areas. The approachstrategically suggests constructing new high-rises on existing risk-prone structures slated for demolition. The designincorporates an elevated green area functioning as a recreational zone, fostering a healthier and more sustainable urbanenvironment. The paper emphasizes Transit-Oriented Development in the design process, aiming to integrate publictransportation with urban development to reduce private vehicle dependency, promote sustainable mobility, and enhanceaccessibility. The objective is to craft a dynamic urban experience that encourages connectivity and a sense of belongingwithin the existing fabric.

Effects of Human Harvesting, Residences, and Forage Abundance on Deer Spatial Distribution.

It has been known that harvesting by humans strongly influences individual within-home range habitat selection of many deer species; however, little is known about the effect of harvesting on coarse-scale habitat selection (i.e., spatial distribution). We examined the summer spatial distribution of sika deer Cervus nippon in relation to human harvesting and other factors, such as human residences, forage abundance, and cover, using pellet group counts at Mount Fuji, central Japan, in 2018. In the study area, harvesting is conducted at medium elevation areas throughout the year, but not at high or low elevation areas where access is difficult or harvesting is prohibited. Spatial distribution of deer was significantly biased to non-harvesting areas and far from residential areas, suggesting that they avoid riskier spaces by establishing a landscape of fear. High-quality food resources (deciduous broad-leaved trees and forbs) were more abundant in harvesting areas than in non-harvesting areas, suggesting that foraging pressure by deer reduce them. However, there were no differences in abundances of more fibrous dwarf bamboo between harvesting and non-harvesting areas, and spatial distribution of deer was significantly biased to higher dwarf bamboo abundance areas, suggesting that the dwarf bamboo is an alternative food resource in non-harvesting areas where supplies of high-quality food were limited. Our results suggest that human harvesting pressure and residences shifted the spatial distribution of deer from the montane forests to subalpine/alpine zones, which may increase damage to vulnerable ecosystems due to severe foraging pressure.

Biobased Activated Carbon from Palm Biomass Enhancing with Acid Treatment as Supercapacitor Electrode Material

Current research on energy storage systems, batteries, and supercapacitor devices is aimed to enhance efficiency and improve environmental sustainability. Supercapacitors offer remarkable attributes such as high transient response and power density. Typically, supercapacitor electrode is made from highly porous carbon material, activated carbon. Commercial activated carbon could be produced from coal, peat, or coconut shell. This study focused on utilization of palm biomass, palm empty fruit bunch (EFB), as raw material to produce activated carbon electrode. The highly porous activated carbon from EFB was synthesized via a low-temperature hydrothermal process and chemical activation. The resulting EFB activated carbon demonstrates favorable characteristics in terms of elevated surface area and porosity. This research investigates the enhancement of activated carbon with acid treatment during hydrothermal process. Two types of acid, citric acid, and phosphoric acid, at different concentrations, were added to biomass. The acid-treated activated carbon from palm biomass was characterized for the specific surface area (BET), pore size distribution and pore volume using the N2 adsorption/desorption technique. The acid-treated activated carbon was fabricated into carbon electrodes and assembled in a symmetrical supercapacitor with 1M H2SO4 as an electrolyte. The supercapacitor performance of acid-treated activated carbon was tested in a symmetrical Swagelok cell to assess specific capacitance using cyclic voltammetry and galvanostatic charge-discharge methods. The acid-treated activated carbon has higher specific capacitance than the activated carbon without acid treatment. This superior performance is attributed to the reduced internal resistance as revealed by the Electrochemical Impedance Spectroscopy (EIS) result. This is possibly due to the formation of micropores in the range of 0.6−0.7 nm which is a suitable pore size for ion transportation in H2SO4 electrolytes. This research has shown that biobased activated carbon from palm oil biomass with acid treatment has a high potential to be used as supercapacitor electrode material. Keywords: Activated carbon, Palm biomass, Hydrothermal, Energy storage, Supercapacitor

Nanomolar detection of organic pollutant -tartrazine in food samples using zinc-metal organic framework/carbon nano fiber - composite modified screen-printed electrode

In this study, we achieved a significant breakthrough by applying a binder-free Zn-MOF@CNF composite as a modifier on a screen-printed electrode (SPE) to achieve highly sensitive and selective detection of tartrazine (TRZ). This composite, with its unique rod-like structure for Zn-MOF and a curl thread-like morphology for carbon nanofibers (CNF), demonstrated a remarkable threefold increase in the sensing current of TRZ at a lower anodic oxidation potential (0.92 V) compared to the bare SPE. The Zn-MOF@CNF/SPE also exhibited a reduced charge transfer resistance of 61.9 Ω, elevated electrochemical active surface area of 0.416 cm2, and high heterogeneous electron transfer rate constant (k0) of 9.77×10−5 cm s−1. Furthermore, it displayed a broad linear range from 0.2 μM to 1000 μM with a remarkable sensitivity of 0.136 µAµM−1cm−2 and an impressive detection limit of 54 nM. Ultimately, the developed Zn-MOF@CNF/SPE sensor demonstrated excellent selectivity amidst various structurally similar overlapping species, outstanding repeatability, reproducibility, and stability in TRZ detection. The practical applicability of Zn-MOF@CNF/SPE was validated through 97 – 100.9 % recovery results in food samples such as jelly, ice cream, soft drinks, and candies.

Spatiotemporal patterns, sustainability, and primary drivers of NDVI-derived vegetation dynamics (2003-2022) in Nepal.

Understanding the vegetation dynamics and their drivers in Nepal has significant scientific reference value for implementing sustainable ecological policies. This study provides a comprehensive analysis of the spatio-temporal variations in vegetation cover in Nepal from 2003 to 2022 using MODIS NDVI data and explores the effects of climatic factors and anthropogenic activities on vegetation. Mann-Kendall test was used to assess the significant trend in NDVI and was integrated with the Hurst exponent to predict future trends. The driving factors of NDVI dynamics were analyzed using Pearson's correlation, partial derivative, and residual analysis methods. The results indicate that over the last 20 years, Nepal has experienced an increasing trend in NDVI at 0.0013 year-1, with 80% of the surface area (vegetation cover) showing an increasing vegetation trend (~ 28% with a significant increase in vegetation). Temperature influenced vegetation dynamics in the higher elevation areas, while precipitation and human interventions influenced the lower elevation areas. The Hurst exponent analysis predicts an improvement in the vegetation cover (greening) for a larger area compared to vegetation degradation (browning). A significantly increased area of NDVI residuals indicates a positive anthropogenic influence on vegetation cover. Anthropogenic activities have a higher relative contribution to NDVI variation followed by temperature and then precipitation. The results of residual trend and Hurst analysis in different regions of Nepal help identify degraded areas, both in the present and future. This information can assist relevant authorities in implementing appropriate policies for a sustainable ecological environment.

Ayurvedic management for Sirajpidaka w.s.r. to nodular episcleritis: A Case Report

Nodular episcleritis is characterized by a discrete, elevated area of inflamed episcleral tissue. In simple episcleritis, vascular congestion is present in the absence of an obvious nodule. The episclera is a fibroelastic structure consisting of two layers loosely joined together. By appearance it looks similar to conjunctivitis, but there is no mucoid discharge. It typically affects young adults. There are many treatments available for nodular episcleritis but all include the use of corticosteroids which on long run produces side effects like posterior subcapsular cataract, glaucoma, allergic conjunctivitis. Development of a treatment protocol devoid of corticosteroids is the need of today`s era. In Ayurveda, the signs and symptoms of episcleritis can be compared with the Lakshanas of Sirajpidaka, described in Shuklagatroga. The present paper discusses a case of Nodular episcleritis management with Ayurvedic principles.

THE INFLUENCE OF THE CAUSES OF INTENTIONALLY SELF-INFLICTED INJURIES IN THE REGIONS OF BRAZIL IN 2015 AND 2020

Suicide is a growing public health issue in Brazil, with patterns and causes of self-inflicted injuries varying between regions and local cultures. This study analyzes the causes of self-inflicted injuries in the 27 federal units of Brazil in 2015 and 2020. Using data from DATASUS, variables of intentional self-harm injuries were identified, classified in the ICD-10 group. Analyses were conducted using the NeatMap and Psych packages, generating heatmaps and tables that allow visualization of the distribution and intensity of cases over the years. The results indicate an increase in suicides in 2020 compared to 2015, influenced by the pandemic period, during which many cases were not reported, yet there was still an increase. Hanging was the most common method in both years, reflecting the easy accessibility of this means in everyday life. States like São Paulo, Minas Gerais, and Rio Grande do Sul showed a higher association with the studied variables, indicating regional concern that demands specific public policies. Rio de Janeiro stood out with a significant increase in injuries related to cliffs and high places in 2020, due to specific geographical and cultural factors of the state. These injuries are associated with easy access to elevated areas and exacerbated social and economic pressure during the pandemic. It is concluded that patterns of self-inflicted injuries remained consistent, with some significant regional variations. These results are crucial for associating regions and causes of self-inflicted injuries, assisting in the development of future preventive measures, such as psychological support programs and specific community interventions for each region.

The snow cover is more important than other climatic variables on the prediction of vegetation dynamics in the Pyrenees (1981–2014)

The dynamics of the mountain vegetation is governed by multiple climatic drivers including temperature, precipitation, radiation and snow cover variability. However, in the Mediterranean environment, little is known about the relative importance of each variable. In this study we assess how different snowpack indices (the maximum annual accumulation, the length of the snow season, and the melt-out date) and key climate variables (precipitation, temperature and shortwave solar radiation) control the interannual variability of the maximum Normalized Difference Vegetation Index (peak NDVI) in the Pyrenees. We use a 33 year long remote sensing dataset (1981–2014) to build a statistical model relating the annual peak NDVI with snow and climate variables. In elevated areas characterized by a well developed seasonal snowpack the melt-out date was the most important climatic variable for predicting the annual peak NDVI. However, at lower elevations where snow presence is ephemeral, shortwave solar radiation was the most important variable. This change in the relative importance of climatic variables occurs around 1300 m a.s.l. The results do not show a significant contribution of maximum snow accumulation, suggesting that indicators of snow presence (i.e. melt-out date or snow season duration), which are significantly easier to obtain than snow mass indicators from remote sensing, could be used to model the influence of the snowpack on peak NDVI at regional scale.

Ecosystem Services Supply from Peri-Urban Watersheds in Greece: Soil Conservation and Water Retention

The main objective of this study is to investigate the supply of ecosystem services (ESs) within peri-urban watersheds (PUWs) across Greece, utilizing earth observation (EO) data and empirical models. To achieve these goals, several open-access geospatial datasets were utilized and processed within a GIS environment. Specifically, the supply of soil conservation and water retention services was assessed at the watershed scale. The results indicates that the supply soil conservation service withing the examined PUWs range from 44.41 t ha−1 y−1 to 441.33 t ha−1 y−1 with an average value of 161.99 t ha−1 y−1. Water retention services vary from 35.09 to 154.63 mm within the PUWs, with an average of 91.45 mm. Additionally, the variation in ES values across distinct altitudinal zones and ecosystem types provides useful insights for implementing protection and management measures. It is evident from the analysis that the soil conservation service gradually increases with elevation, with alpine and subalpine areas exhibiting the highest values. Moreover, mountainous and semi-mountainous regions demonstrate higher values compared to the estimated average soil conservation services of the entire study area. Furthermore, the provision of water retention services varies across different altitudinal zones. Specifically, the mountainous and semi-mountainous areas exhibit the highest values, followed by the subalpine and hilly regions, while lower values are observed in the lowland and alpine regions. The analysis also reveals distinct patterns in ecosystem services across various ecosystem types within the PUWs. Woodland and forest, along with heathland and shrubs, demonstrate higher values in terms of both soil conservation and water retention services. Our findings contribute to understanding the dynamics of ESs in PUWs, highlighting their significance for sustainable land management, and informing policy decisions aimed at preserving ecosystem health and resilience.

The Southern African Heat Low: Structure, Seasonal and Diurnal Variability, and Climatological Trends

Abstract Heat lows are key features of subtropical climates and monsoon systems. In southern Africa, they are pivotal to understanding divergent climate change projections, in particular the veracity of future rainfall decline. Compared to other heat lows, including in West Africa and Australia, the southern African heat low remains poorly documented. Here, we analyze the diurnal cycle, seasonal variability, and trends of the heat low in reanalysis data. In ERA5, 462 strong heat low days are detected between September and March from 1990 to 2019, equating to 7.3% of days sampled. These events feature ascent (exceeding −0.2 Pa s−1) at low levels (strongest between 800 and 600 hPa) and subsidence aloft, generating low-level cyclonic flow with anticyclonic flow above. This flow exhibits strong diurnal variability, with peak windspeeds between 0600 and 0900 UTC and maximum ascent at ∼2300 UTC. Heat lows form preferentially over Angola in September (∼14°S) and October (15°–20°S), and in Namibia from November to March (∼20°–26°S). Strongest ascent occurs over areas of high elevation. Finally, we show a rapidly increasing frequency of strong heat low days, with a 175% increase between 1960–89 and 1990–2019. The greatest increase (459%) has occurred in the early summer months of September and October, consistent with projections of delayed rainfall onset. Strikingly, more strong heat lows are detected in the most recent 5 years of analysis (2014–19) than in the 30-yr period from 1960 to 1989. These results suggest the heat low is an important feature in determining drying trends over southern Africa and is a vital indicator of climate model accuracy. Significance Statement This work documents the heat low that forms in southern Africa in the lowest levels of the atmosphere. The feature is present during austral summer (from September to March) and is associated with below average rainfall across much of the subcontinent. The frequency of strong heat lows has rapidly increased in line with regional amplified warming trends. The heat low is identified as an important control on circulation and precipitation patterns and changes in the frequency or intensity of the feature in the future are likely to influence the strength of declining rainfall trends across southern Africa.

Structural architecture of the Mapimí Biosphere Reserve and its surroundings, north-central Mexico: New insights from U–Pb geochronology and interpreted structural data

The Mapimí Biosphere Reserve is in northeastern México, near the boundary between the Mesozoic Coahuila platform and the Mexican central basin. A large portion of the Reserve is a broad bolson where isolated mountains are surrounded by flat terrain. Two slightly elevated areas (benches) are subtle topographic features in the Reserve. There, in rolling hills occur folded, Upper Cretaceous – Paleogene, poorly-lithified and -exposed transitional and continental sediments and tilted Paleogene volcanic and subvolcanic rocks. Each bench occupies a band that is ∼75 × 20 km. A land strip where playa lakes and salt-flats occur separates the benches. Deformation style within the benches differ from those in regions where platform carbonates or Mexican central basin rocks dominate. Structures within the benches are gentle, open folds and medium sized (15 - 3 km in diameter) structural domes and basins. Furthermore, orientation of the fold axes shows a wide scatter. There is at least one folded structure in the Reserve that displays an interference pattern that indicates refolding. Post-Oligocene normal faults bound the benches and overprinted on the folded structures. However, the most important normal fault, which cuts in half two domes and one structural basin, lacks a clear topographic scarp. The occurrence of broad exposures of the Upper Cretaceous Indidura Formation in flat areas, interpreted as the footwall block of a major normal fault, is consistent with the interpretation that the benches are rocky pediments partially covered by alluvium and/or eolian sediments. Thus, it appears that Cenozoic extension has been inactive for a long period of time in this portion of the Mexican Basin and Range province. The best evidence of NNW, down to the SW normal faults within the Reserve is in the Sierra de Mohóvano. There, an array of domino-style normal faults cut Oligocene volcanic rocks and gravel deposits. The master fault of the domino array is adjacent and parallel to a fold in Mesozoic marine rocks.We attribute the unusual characteristic of the folds in the Reserve to 1) the region is near the boundary among the large calcareous platform and the basin, and the boundary had a significant curvature, concave toward the W. This geometry caused complex deformation during crustal shortening, as tectonic transport associated with the Mexican orogen is toward the NE, 2) a significant difference in competence between the poorly consolidated transitional and continental deposits and the more competent rocks in the carbonate platform also played a role in the formation of the structures, as folds in the benches formed during the waning stage of the Mexican orogen, as suggested by the detrital zircon U–Pb ages, which are as young as ∼30 Ma, 3) Oligocene magmatic activity caused the emplacement of laccoliths, which locally modified older folds forming domes, 4) finally, Basin and Range extension (<27 Ma) cut across the folded sediments and overlying volcanic rocks. Evidence of extension in the Reserve is subtle as normal faults have remained inactive for a long time, while isostatic uplift and erosion developed the pediment, effectively masked most fault scarps.

Visceral Fat Area and Subcutaneous Fat Area Increase in Hyperthyroidism Patients After Treatment-A Single-Group Repeated-Measures Trial.

There is evidence that long-term vascular risk remains increased in patients with hyperthyroidism even after normalization of thyroid function, and the mechanisms that regulate this risk are unclear. The aim of this study was to assess how visceral fat area and subcutaneous fat area change after hyperthyroidism treatment, and to further explore the relationship between thyroid hormones, abdominal fat area (visceral fat area and subcutaneous fat area), and lipids. 50 patients with newly diagnosed Graves' disease were selected. Anthropometric parameters (weight, height, body mass index, waist circumference, neck circumference), laboratory parameters (thyroid hormones, lipid metabolism indices), abdominal fat area (visceral fat area and subcutaneous fat area), and drug dose were collected. Measurements were made at baseline, 6 and 12 months after treatment. We used linear mixed-effects models for analysis. The results showed that the following indexes changed significantly at different time points: visceral fat area, subcutaneous fat area, free triiodothyronine, free thyroxine, thyroid stimulating hormone, total cholesterol, high-density lipoprotein, low-density lipoprotein, body weight, neck circumference, body mass index, waist circumference, and drug dose (All P<0.001). We found that free triiodothyronine and free thyroxine were significantly negatively associated with abdominal fat area (P<0.01). There was no significant correlation between drug dose and abdominal fat area (P>0.05). Total cholesterol and low-density lipoprotein were significantly positively associated with abdominal fat area (P<0.01). However, high-density lipoprotein (P=0.06) was not correlated with abdominal fat area. Moreover, the results showed a significant negative correlation between thyroid hormones and lipids (P<0.001). After anti-thyroid medicine treatment, patients had elevated visceral fat area and subcutaneous fat area and altered lipid profiles. These changes may be one of the reasons why metabolic and cardiovascular diseases remain increased after thyroid function is restored.

Chronic wasting disease alters the movement behavior and habitat use of mule deer during clinical stages of infection.

Integrating host movement and pathogen data is a central issue in wildlife disease ecology that will allow for a better understanding of disease transmission. We examined how adult female mule deer (Odocoileus hemionus) responded behaviorally to infection with chronic wasting disease (CWD). We compared movement and habitat use of CWD-infected deer (n = 18) to those that succumbed to starvation (and were CWD-negative by ELISA and IHC; n = 8) and others in which CWD was not detected (n = 111, including animals that survived the duration of the study) using GPS collar data from two distinct populations collared in central Wyoming, USA during 2018-2022. CWD and predation were the leading causes of mortality during our study (32/91 deaths attributed to CWD and 27/91 deaths attributed to predation). Deer infected with CWD moved slower and used lower elevation areas closer to rivers in the months preceding death compared with uninfected deer that did not succumb to starvation. Although CWD-infected deer and those that died of starvation moved at similar speeds during the final months of life, CWD-infected deer used areas closer to streams with less herbaceous biomass than starved deer. These behavioral differences may allow for the development of predictive models of disease status from movement data, which will be useful to supplement field and laboratory diagnostics or when mortalities cannot be quickly retrieved to assess cause-specific mortality. Furthermore, identifying individuals who are sick before predation events could help to assess the extent to which disease mortality is compensatory with predation. Finally, infected animals began to slow down around 4 months prior to death from CWD. Our approach for detecting the timing of infection-induced shifts in movement behavior may be useful in application to other disease systems to better understand the response of wildlife to infectious disease.

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength.

Aerogels, as a new type of high-temperature-resistant insulation material, find extensive application in aerospace, high-temperature industrial furnaces, new energy batteries, and various other domains, yet still face some limitations such as inadequate temperature resistance and pronounced brittleness. In this work, SiC/HfC composite aerogels were prepared through a combination of sol-gel method, atmospheric pressure drying technique, and carbothermal reduction reaction. The effects of different molar ratios, calcination time, and temperatures on the microstructural features and physicochemical properties of the resulting SiC/HfC composite aerogels were investigated. The aerogel exhibited an elevated BET-specific surface area of 279.75 m2/g, while the sample displayed an extraordinarily low thermal conductivity of 0.052 W/(m·K). Most notably, the compressive strength reached an outstanding 5.93 MPa after a carbonization temperature of 1500 °C, far exceeding the values reported in prior aerogel studies. This research provided an innovative approach for advancing the development of carbide aerogels in the realm of high-temperature applications.

Tasmanian devil (Sarcophilus harrisii) gene flow and source-sink dynamics

Increased access to genetic data has substantially improved how we manage threatened species. The Tasmanian devil (Sarcophilus harrisii) is listed as endangered due to the ongoing threat of a highly contagious cancer, devil facial tumour disease (DFTD), causing more than 80% population reductions. To assist future management interventions (e.g. releases into wild sites) we expanded upon previous studies of gene flow for the devil by assessing more recent and broad-scale patterns. We use genome-wide single nucleotide polymorphisms generated via DArTSeq across 21 devil sites to delineate source-sink dynamics across the species’ range. Our findings revealed gene flow is stronger on the northeast and central regions of Tasmania, with high rates of bidirectional gene flow among central sites. The northwest exhibits weaker connectivity relative to other regions of Tasmania, while gene flow appears to be non-existent between the southwest and other areas. Northeast coastal sites tend to serve as ‘sources’ for inland central sites, whereas gene flow appears restricted to the coastline in the northwest. These results are consistent with genetic structure of devil sites and spatial spread of DFTD, which has yet to arrive in the southwest region of Tasmania. Southwest isolation is probably due to mountain ranges and lack of roadways. Interestingly, some waterbodies did not appear to restrict devil movement among sites. Conversely, areas of high elevation act as apparent barriers, as evidenced by limited gene flow observed between eastern and western sites. Integrating source-sink dynamics into conservation management planning will be crucial in developing effective strategies to safeguard the Tasmanian devil and other threatened species facing similar threats (i.e. disease, habitat loss).

The Effect of Lower Limb Alignment on Tibiofemoral Joint Contact Biomechanics after Medial Meniscus Posterior Root Repair: A Finite-Element Analysis.

The purpose of this study was to determine how variations in lower limb alignment affect tibiofemoral joint contact biomechanics in the setting of medial meniscus posterior root tear (MMPRT) and associated root repair. A finite-element model of an intact knee joint was developed. Limb alignments ranging from 4° valgus to 8° varus were simulated under a 1,000 N compression load applied to the femoral head. For the intact, MMPRT, and root repair conditions, the peak contact pressure (PCP), total contact area, mean and maximum local contact pressure (LCP) elevation, and total area of LCP elevation of the medial tibiofemoral compartment were quantified. The PCP and total contact area of the medial compartment in the intact knee increased from 2.43 MPa and 361 mm 2 at 4° valgus to 9.09 MPa and 508 mm 2 at 8° of varus. Compared with the intact state, in the MMPRT condition, medial compartment PCP was greater and the total contact area smaller for all alignment conditions. Root repair roughly restored PCPs in the medial compartment; however, this ability was compromised in knees with increasing varus alignment. Specifically, elevations in PCP relative to the intact state increased with increasing varus, as did the total contact area with LCP elevation. After root repair, medial compartment PCP remained elevated above the intact state at all degrees tested, ranging from 0.05 MPa at 4° valgus to 0.27 MPa at 8° of varus, with overall PCP values increasing from 2.48 to 9.09 MPa. For varus alignment greater than 4°, root repair failed to reduce the total contact area with LCP elevation relative to the MMPRT state. Greater PCPs and areas of LCP elevation in varus knees may reduce the clinical effectiveness of root repair in delaying or preventing the development of tibiofemoral osteoarthritis.

Age estimation model for individual tree in natural Larix gmelinii forest based on random forest model

To accurately estimate the age of individual tree and to achieve full-cycle sustainable management of natural Larix gmelinii forest in Great Xing'an Mountains of northeastern China, we constructed individual tree age prediction model using stepwise regression and random forest algorithms based on 44 fixed plots data and 280 stan-dard tree cores obtained from the Pangu Forest Farm. We analyzed the influence of stand structure, site conditions, and competition index on the accuracy of model prediction. The model was evaluated by the coefficient of determination (R2), root mean square error (RMSE), and mean absolute error (MAE). The results showed that the random forest model had the highest prediction accuracy when number of decision trees was 1500 and number of node con-tention variables was 8. The random forest model had better accuracy and prediction ability than the stepwise regression model, with R2, RMSE and MAE of 0.5882, 9.9259 a, 8.1155 a. Diameter at breast height was the most important factor affecting age prediction (83.8%), followed by tree height (34.4%), elevation (17.9%), and basal area per hectare (17.5%). The random forest algorithm exhibited better adaptability and modeling effect on constructing a predictive model for individual tree age. This research contributed to improving the accuracy of growth and harvest estimation for L. gmelinii, and could provide a reference for other scientific studies related to tree age estimation in forests.