Elemental Mapping Analysis Research Articles

An Oxygen‐Self‐Produced Nanoplatform Based on MnO2 for Relieving Hypoxia

AbstractManganese dioxide (MnO2) nanoparticles are increasingly recognized for their potential in biomedical applications, particularly in the realm of hypoxic cancer therapy, due to their unique physicochemical characteristics. This investigation introduces a novel, template‐free synthesis strategy. The reducing groups inherent in bovine serum albumin (BSA) facilitate a redox reaction with potassium permanganate (KMnO4), while the abundance of functional groups in BSA is instrumental in the formation of MnO2. The transmission electron microscopy (TEM) analysis has characterized the synthesized MnO2 nanoparticles, termed BM NPs, as spherical particles with a mean diameter of 210 nm and zeta potential of −40.1 mV measured by dynamic light scattering (DLS). The Fourier transform infrared (FT‐IR) spectrum of BM NPs exhibits the characteristic peak of MnO2 at 1113 cm−1 and 620 cm−1. Furthermore, the elemental composition of BM NPs has been ascertained through energy‐dispersive X‐ray (EDX) elemental mapping analysis. Though concentration of BM NPs up to 200 μg/mL, the survival rate of 4T1 cells remained approximately 75 %. Given that BM NPs at a concentration of 100 μg/mL significantly alleviate cellular hypoxia, the high oxygen‐generating capacity of these nanoparticles is proved, suggesting their suitability as a drug delivery system, especially in the context of hypoxic tumor microenvironments.

Supported phenylalanine on core-shell mesoporous microsphere as a catalyst for the synthesis of triazolo[1,2-a] indazole-triones and spiro triazolo[1,2-a] indazole-tetraones

In recent years, mesoporous silica materials have gained attention due to their unique properties, such as high surface area, pore volume, size, and chemical stability. These characteristics make them effective in various fields, particularly efficient supports in heterogeneous catalytic reactions. The present study developed a novel type of core-shell mesoporous microsphere material by anchoring phenylalanine on a core-shell SiO2@NiO@MS support. The catalyst support (SiO2@NiO@MS) was synthesized through homogeneous precipitation and sol-gel methods, with NiO encapsulated within the porous silica. The catalyst was characterized using various techniques, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS), Elemental mapping analysis, N2 adsorption-desorption, Transmission electron microscopy (TEM), Vibrating sample magnetometer (VSM), and Thermogravimetric analysis (TGA). It was then employed for the synthesis of triazolo[1,2-a]indazole-trione and spiro triazolo[1,2-a]indazole-tetraones compounds from 4-phenyl urazole, dimedone, and aromatic aldehydes or isatin derivatives. This synthetic approach offers multiple advantages, including high yields, faster reaction times, low catalyst requirements, and environmentally sustainable conditions.

1,4-Bis(pyridin-1-ium)benzene trifluoroacetate coordinated to chloropropyl functionalized SiO2-nano-NiFe2O4 (BPBTCSF): as a novel and effectual mesoporous bi-functional magnetic catalyst for the synthesis pyrido[2,3-d:6,5-d']dipyrimidines

Here in, we report the synthesis of 1,4-Bis(pyridin-1-ium)benzene trifluoroacetate coordinated to chloropropyl functionalized SiO2-nano-NiFe2O4 (BPBTCSF). Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), elemental mapping analysis, Brunauer-Emmett-Teller (BET), thermal gravimetric analysis (TGA), vibrating-sample magnetometry (VSM) and X-ray diffraction (XRD) techniques characterized the framework of this catalyst. The catalytic activity of this nano-composite was then examined in the one-pot four-component reaction of 2-thiobarbituric acid, NH4OAc, and aldehyde for synthesis of pyrido[2,3-d:6,5-d']dipyrimidines under optimal conditions (5 mg of BPBTCSF, H2O, 25°C). BPBTCSF exhibits benefits as a heterogeneous catalyst, such as exciting performance in the production of derivatives (2 to 5 min, 90% to 98%), six times reproducibility with a slight decrease in catalytic activity, the simultaneous presence of acidic and basic sites (Hydrogen attached to the electronegative nitrogen atom and CF3COOˉ, respectively), convenient purification and separation from the reaction mixture.

Fluorescence sensor based on Methionine-Modified silver nanoparticles located on Fe-BTC metal–organic framework (Meth-AgNPs@Fe-BTC) for trace detection of fenitrothion pesticide in aqueous samples

This research introduces a new “turn-on mode” fluorescence sensor for the detection of fenitrothion (FNT) pesticide in various samples. The sensor is constructed using a porous metal–organic framework (Fe-BTC) as a template to locate silver nanoparticles (AgNPs) and methionine amino acid (Meth). Methionine acts as a bridge, facilitating the interaction between FNT and AgNPs, which subsequently results in the release of AgNPs from the composite structure. The physicochemical properties of the synthesized Meth-AgNPs@Fe-BTC composite were analyzed by Fourier-transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDAX), Transmission electron microscopy (TEM), and elemental mapping (MAP) analysis. The sensing system is based on tracking the fluorescence of the synthetic composite in such a way that the intensity of the fluorescence of the composite increases in the presence of different concentrations of fenitrothion (FNT). The effective parameters on the sensor signal, including composite dosage, pH, sonication and reaction time were investigated and optimized. The calibration graph, under optimal conditions, exhibited linearity in the concentration range of 2–95 nM for FNT, with a limit of detection of 1.9 nM. The suggested sensor was successfully validated by analyzing FNT in several real water samples and fruit juices. This research presents a significant technical achievement in the development of a fluorescence sensor for the detection of FNT, offering a sensitive and reliable method for environmental monitoring and public health preservation.

One Pot Green Synthesis of Zr doped NiO Nanoparticles using Annona squamosa Seed Extract: Characterization and Biological Properties

Pure and Zr-doped NiO nanoparticles were successfully synthesized through green synthesis using extract of Annona squamosa seeds. The synthesized nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-vis spectroscopy, field emission scanning electron microscopy (FESEM), EDAX (energy dispersive X-ray analysis) and elemental mapping analysis. The addition of zirconium dopant has been integrated into the single-phase NiO lattice structure as indicated by characterization findings. Furthermore, the antibacterial, antifungal and antioxidant properties of Zr-doped and undoped NiO NPs were thoroughly examined. As a result of the strong Zr-doped NiO NPs synergistic effect, the results showed that the Zr-doped NiO NPs have improved the biomedical properties when compared to the undoped NiO NPs. The optimized size and shape of the nanoparticles contributed significantly to their improved effectiveness against the microorganisms and oxidative stress.

Revolutionizing acridine synthesis: novel core-shell magnetic nanoparticles and Co-Zn zeolitic imidazolate framework with 1-aza-18-crown-6-ether-Ni catalysts

Nanoparticles have emerged as a critical catalyst substrate due to their exceptional features, such as catalytic efficiency, high stability, and easy recovery. In our research, we have developed an innovative and environmentally friendly magnetic mesoporous nanocatalyst. Using the co-precipitation method, we produced magnetic nanoparticles (Fe3O4) and coated them with Zeolitic imidazolate frameworks (ZIFs) to enhance their surface area and chemical stability. The resulting substrate was functionalized with 1-aza-18-crown-6-ether and nickel metal. Our prepared catalyst has been rigorously evaluated using advanced techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmet-Teller (BET), vibrating sample magnetometry (VSM), scanning electron microscopy and energy dispersive X-ray (SEM-EDS), inductively coupled plasma (ICP), elemental mapping analysis (EMA), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). By synthesizing acridine derivatives, we have demonstrated the exceptional efficiency of our catalyst in organic compound synthesis. Through optimization, we have established the ideal parameters for catalytic processes, including catalyst amount, temperature, time, and ultrasonic use. Our catalyst has been proven to exhibit remarkable physical and chemical properties, such as porosity, temperature resistance, and recyclability. Notably, our heterogeneous nanocatalyst has shown outstanding performance and can be recycled six times without any loss in efficiency, affirming its potential in acridine.

Electroanalytical Studies on Codeposition of Cobalt with Ruthenium from Acid Chloride Baths

The aim of this study was to systematically analyze the influence of potential and the Co(II)–Ru(III) molar ratio on the electrochemical behavior of the Co–Ru system during codeposition from acidic chloride electrolytes. The equilibrium speciation of the baths was investigated spectrophotometrically and compared with theoretical calculations based on the stability constants of Co(II) and Ru(III) complexes. The codeposition of the metals was characterized using electroanalytical methods, including cyclic voltammetry, chronoamperometry, and anodic stripping linear voltammetry. The alloys obtained at different potentials were analyzed for their elemental composition (EDS, mapping), phase composition (XRD), and surface morphology (SEM). The morphology and composition of the alloys were mainly dependent on the deposition potential, which controlled the cobalt incorporation. Ruthenium–rich alloys were produced at potentials of −0.6 V and −0.7 V (vs. SCE). In these conditions, cobalt anomalously codeposited due to the formation of the CoOH+ intermediate, triggered by the intense hydrogen evolution on the ruthenium sublayer. Bulk cobalt electrodeposition began at a potential of around −0.8 V, resulting in the formation of cobalt-rich alloys. The early stages of the electrodeposition were investigated using different nucleation models. A transition from 2D progressive nucleation to 3D instantaneous nucleation at around −0.8 V was identified as being caused by cobalt incorporation. This was well correlated with electroanalytical data, partial polarization curves of alloy deposition, elemental mapping analysis, and the structure of the deposits.

Improving thermoelectric performance of Nickel substituted ZnSb alloy through carrier engineering and nanostructuring

Zn1-xNixSb (0 ≤ x ≤ 0.08) nanostructures were prepared by the planetary Ball milling technique. XRD analysis confirms the phase purity and orthorhombic crystal structure of the samples. FESEM analysis shows the spherical morphology of the Zn1-xNixSb samples. The EDX and elemental mapping analysis confirms the composition and elemental distribution of Zn1-xNixSb (0 ≤ x ≤ 0.08) alloys. HRTEM images clearly show the interfaced grains with grain boundaries. DRS-UV analysis revealed the narrowing of bandgap while increasing the Ni content in Zn site due to alloying effect. The synthesized Zn1-xNixSb alloys show low resistivity compared to pure samples due to high carrier concentrations. Seebeck coefficient of Zn1-xNixSb alloys were measured from room temperature to 635 K. A high-power factor of 1344 µW/m K2 was obtained for the Zn0.98Ni0.02Sb sample at 533 K compared to pristine ZnSb (574 µW/m K2 at 533 K). High thermoelectric figure of merit (zT) of 0.69 was achieved for Zn0.98Ni0.02Sb sample at 533 K compared to pristine ZnSb (zT of 0.34 at 533 K). The experimental results illustrated that Nickel substitution is a one of the possible ways to improve the thermoelectric figure of merit of ZnSb alloys.

Assembly of Fe@Zn-Coordination Polymer Composite: Iron Doping Foster the Luminescent Detection for Tetracycline, Uric Acid and Cr2O72− and Crystal Violet Degradation Efficiency

Coordination polymers exhibit a diverse array of applications across various fields, and through the development of composite materials, their utility and versatility are further enhanced, broadening their impact on our world. In this work We synthesized the first coordination polymer (CP) based on Zn and doped with Fe composites (Fe@Zn-CP Composite), which exhibit enhanced photocatalytic activity triggered by visible light. Using mixed ligands orotic acid potassium salt, 1,3 di (4-pyridyl) propane (dpp), and FeSO4 in a simple method at ambient temperature, the Zn-CP [Zn8(Or)8(dpp)4(H2O)8] was resynthesized here to form the Fe@Zn-CP composites. Zn-CP and Fe@Zn-CP Composite were both characterized by powder X-ray diffraction, FT-IR spectra analysis, and SEM-EDX analysis and elemental mapping analysis. It has been observed that Fe@Zn-CP Composite is as multi-functional luminescence sensor for MnO4−, Cr2O72− and Tetracycline with high sensitivity. In-depth research has also been done on the recyclable nature, and photocatalytic efficiency of Zn-CP and Fe@Zn-CP Composite for the decomposition of organic dyes Crystal Violet and Rose Bengal (RB) in contaminated water under the sunlight irradiation.

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies.

This study investigates the removal efficiency of Cu2+ from wastewater using a composite hydrogel made of carbon nanotubes (CNTs), sodium alginate (SA), and polyacrylic acid (PAA) prepared by free radical polymerization. The CNTs@SA/PAA hydrogel's structure and properties were characterized using SEM, TEM, FTIR, XRD, rheology, DSC, EDS, elemental mapping analysis, and swelling. The adsorption performance for Cu2+ was tested in batch adsorption experiments, considering the pH, dosage, initial concentration, and contact time. The optimal conditions for Cu2+ removal were pH 5.0, an adsorbent dosage of 500 mg/L, and a contact time of 360 min. The adsorption followed pseudo-second order kinetics. Isotherm analyses (Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Sips, Toth, and Khan) revealed that the Freundlich isotherm best described the adsorption, with a maximum capacity of 358.52 mg/g. A thermodynamic analysis indicated that physical adsorption was the main interaction, with the spontaneity of the process also demonstrated. This study highlights the high efficiency and environmental friendliness of CNT@SA/PAA composites for Cu2+ removal from wastewater, offering a promising approach for water treatment.

Use of carbon black powder for surface treatment of stainless steel substrates via a low-cost CO2 laser

Nowadays, AISI 304 stainless steel plays a crucial role in industry. However, stainless steel exhibits limited wear resistance as it is used in parts with relative motion. Laser treatment emerges as a promising approach to improve its superficial properties. Using a laser as a heat source presents unique properties for heating surfaces, as the first atomic layers of the material absorb the radiation from the laser beam. In this study, we used a low-cost 100 W CO2 laser with carbon black powder to treat the surface of AISI 304 steels. In addition, the reflectance of irradiation on steel is 90%. We used carbon black powder as a photo-absorbing material for radiation to overcome this obstacle. The characterization included field emission gun–scanning electron microscopy, energy dispersive x ray, microhardness, and pin-on reciprocation tribometer. The results showed a significant increase in surface hardness after laser treatment compared to the untreated substrate at a magnitude of 3.8 times. Elemental mapping analysis revealed carbon's presence on the substrate's surface. In addition to increasing surface hardness, we observed a decrease in the friction coefficient of the laser-treated samples compared to the reference substrate. Finally, it could be concluded that carbon black powder had a triple function; it acted as a photo-absorbent material, a carbon source to increase surface hardness, and a solid lubricant. These results show the predictions of using a low-cost CO2 laser with carbon black powder as an efficient, versatile, and fast alternative.

Folic acid-conjugated bovine serum albumin-coated selenium-ZIF-8 core/shell nanoparticles for dual target-specific drug delivery in breast cancer.

Methotrexate (MTX), a frequently used chemotherapeutic agent, has limited water solubility, leading to rapid clearance even in local injections. In the present study, we developed folic acid-conjugated BSA-stabilized selenium-ZIF-8 core/shell nanoparticles for targeted delivery of MTX to combat breast cancer. FT-IR, XRD, SEM, TEM, and elemental mapping analysis confirmed the successful formation of FA-BSA@MTX@Se@ZIF-8. The developed nano-DDS had a mean diameter, polydispersity index, and zeta potential of 254.8nm, 0.17, and - 16.5 mV, respectively. The release behavior of MTX from the nanocarriers was pH-dependent, where the cumulative release percentage at pH 5.4 was higher than at pH 7.4. BSA significantly improved the blood compatibility of nanoparticles so that after modifying their surface with BSA, the percentage of hemolysis decreased from 12.67 to 5.12%. The loading of methotrexate in BSA@Se@ZIF-8 nanoparticles reduced its IC50 on 4T1 cells from 40.29µg/mL to 16.54µg/mL, and by conjugating folic acid on the surface, this value even decreased to 12.27µg/mL. In vivo evaluation of the inhibitory effect in tumor-bearing mice showed that FA-BSA@MTX@Se@ZIF-8 caused a 2.8-fold reduction in tumor volume compared to the free MTX, which is due to the anticancer effect of selenium nanoparticles, the pH sensitivity of ZIF-8, and the presence of folic acid on the surface as a targeting agent. More importantly, histological studies and animal body weight monitoring confirmed that developed nano-DDS does not have significant organ toxicity. Taking together, the incorporation of chemotherapeutics in folic acid-conjugated BSA-stabilized selenium-ZIF-8 nanoparticles may hold a significant impact in the field of future tumor management.

Nanoarchitectonics of vanadium nanoparticles decorated mesoporous carbon nitride in photocatalytic systems: A study on ethylbenzene oxidation reaction

In this work, we have described the synthesis of vanadium (V) nanoparticles (NPs) anchored on mesoporous graphitic carbon nitride (V@mpg-C3N4) and their uses in photocatalytic ethylbenzene oxidation to the respective acetophenones. The mpg-C3N4 serves as the support for the decoration of V NPs, through a simple impregnation method. Various advanced techniques, such as XRD, UV–vis spectrometry, HRTEM, HAADF-STEM, AC-STEM, elemental mapping, and BET surface area analysis, were employed for the characterization of V@mpg-C3N4. The detailed characterization studies reveal that the V@mpg-C3N4 catalyst has a medium band gap (2.78 eV), a high surface area (76.7 m2g−1), and a mesoporous nature. The V@mpg-C3N4 photocatalysts demonstrated excellent performance in the light-assisted oxidation of ethylbenzene, achieving over 99 % conversion and selectivity for acetophenone in an environmentally friendly solvent (water) using a domestic light source (50 W white light). This developed synthesis strategy will be useful for synthesizing various noble and non-noble metal-based catalysts and their applications in organic transformation and environmental remediation.

The Xilaokou carbonate-sulfide vein type gold deposit: A distinct mineralization in the giant Jiaodong gold province, North China

The Xilaokou gold deposit with ca. 50 t of gold reserve @ 2.7 g/t represents a novel type (carbonate-sulfide vein type) of gold mineralization within the Jiaodong gold province. However, its mineralization age and metallogenic mechanism remain poorly constrained, hindering a comprehensive understanding of the ore-forming processes in the Jiaodong gold province. In this study, we employ syn-ore stage hydrothermal monazite in situ U-Pb geochronology to determine the ore-forming age of the Xilaokou gold deposit. Additionally, we conduct in situ LA-(MC)-ICP-MS elemental mapping and sulfur isotope analysis in ore-related pyrite to unravel the sulfur source(s) and provide new insights into the ore-forming processes of the Xilaokou gold deposit. Our findings reveal the following key points: (1) U-Pb dating of hydrothermal monazite in Au-bearing pyrite yields an ore-forming age of119.9 ± 3.0 Ma. This age is consistent with the mineralization ages (around 120 ± 5 Ma) of other gold deposits in the region, including Liaoshang-, Jiaojia-, and Linglong-type deposits. (2) Gold in pyrite primarily occurs as micro-grains (5–20 μm) within pyrite fissures associated with sphalerite and galena. (3) Elemental mapping and sulfur isotope analysis indicate that major Au mineralization is linked to elevated concentrations of As, Sb, and Tl, along with heavy sulfur isotope values (δ34S∼24.7 ‰). (4) Early-stage Au mineralization is characterized by enrichment of As, Cu, and Bi, with normal sulfur isotopic composition (δ34S∼8 ‰). We propose that the carbonate-sulfide vein type gold deposits represented by the Liaoshang and Xilaokou gold deposits in the Jiaodong gold province are genetically linked to quartz-sulfide vein and disseminated type deposits. The major ore-forming stage involved the addition of S and Au from a metamorphic massif at slightly lower temperatures. These findings highlight a new exploration direction within the North China Craton. In summary, the Xilaokou gold deposit provides valuable insights into gold mineralization processes in Jiaodong, emphasizing the importance of considering diverse deposit types and their genetic relationships in the region.

Cobalt-Doped ZnO Nanocomposits for Efficient Dye Degradation: Charge Transfer.

Doping enhances the optical properties of high-band gap zinc oxide nanoparticles (ZnO NPs), essential for their photocatalytic activity. We used the combustion approach to synthesize cobalt-doped ZnO heterostructure (CDZO). By creating a mid-edge level, it was possible to tune the indirect band gap of the ZnO NPs from 3.1 eV to 1.8 eV. The red shift and reduction in the intensity of the photoluminescence (PL) spectra resulted from hindrances in electron-hole recombination and sp-d exchange interactions. These improved optical properties expanded the absorption of solar light and enhanced charge transfer. The field emission scanning electron microscopy (FESEM) image and elemental mapping analysis confirmed the CDZO's porous nature and the dopant's uniform distribution. The porosity, nanoscale size (25-55 nm), and crystallinity of the CDZO were further verified by high-resolution transmission electron microscopy (HRTEM) and selected area electron image analysis. The photocatalytic activity of the CDZO exhibited much greater efficiency (k=0.131 min-1) than that of ZnO NPs (k=0.017 min-1). Therefore, doped heterostructures show great promise for industrial-scale environmental remediation applications.

Evaluation of formation of solubility-limited solid phase of calcium- and magnesium-bearing immobilizers by microscopic observation and element mapping analysis.

Evaluation of formation of solubility-limited solid phase of calcium- and magnesium-bearing immobilizers by microscopic observation and element mapping analysis.

MPC@But-SO3H a mesoporous heterogeneous organocatalyst in one-pot tandem synthesis of dihydroindeno[1,2-b]pyrrole derivatives

A sustainable, metal-free, and highly efficient protocol for the synthesis of dihydroindeno[1,2-b]pyrrole derivatives via a tandem one-pot three-component reaction in aqueous medium at room temperature using an effective and reusable mesoporous heterogeneous organocatalyst, MPC@But-SO3H has been developed. MPC@But-SO3H was easily synthesized using a melamine-based covalent organic polymer and 1,4-butane sultone. The organocatalyst was well characterized by numerous spectroscopic techniques such as Fourier Transform Infrared (FTIR), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), Powder X-ray diffraction (PXRD), Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX), elemental mapping, and Thermal Gravimetric (TG) analyses. The catalyst displayed excellent catalytic potential, high thermochemical stability, and reusability for up to eight catalytic cycles. It offered the title compounds in excellent yields (˃90%) in a short reaction time (9-14 min). The synthesized compounds were characterized through FTIR, 1H, and 13C Nuclear Magnetic Resonance (NMR), and the molecular structure of 2-(benzylamino)-3a,8b-dihydroxy-1-methyl-3-nitro-3a,8b-dihydroindeno[1,2-b]pyrrol-4(1H)-one (4a) was confirmed by the Single Crystal XRD (SC-XRD) analysis. The key features of the present protocol include the use of water as a green solvent, zero involvement of any metal, sustainable reaction conditions, easy catalyst recovery, and a simple work-up procedure. The calculations for green metrics parameters further supported the greenness and sustainability of the protocol.

An eco-friendly convenient approach for the synthesis of guar gum integrated copper nanoparticles: Investigation of its catalytic activity in the C[sbnd]N Ullmann coupling reactions and study of its anti-human kidney cancer effects

We carried out this research was in order to evaluate the potency of guar gum (GG) hydrogel to conduct CuO NPs synthesis by adopting an eco-friendly approach as well as to study its role as catalyst and in relieving cancerous cell lines. In this context, we accomplished the CuO NPs/GG synthesis by employing a simple one-step approach and identified its characters through UV–Visible (UV–Vis) spectroscopy, X-ray diffraction (XRD), transmission electronic microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-rays spectroscopy (EDS), elemental mapping and ICP-OES analysis. XRD and TEM results of CuO NPs/GG showed the face centered cubic (fcc) structures and predominantly spherical shaped with a size of 20–30 nm. After the characterization, the prepared CuO NPs/GG nanocatalyst was used as catalyst in the N-arylation of amines (indole and imidazoles) through C(aryl)-N chemical bond arrangement from the related aryl halides (I, Br, Cl) by Ullmann-type coupling reactions. It is worth mentioning that the novel catalyst has the potential of being recycled seven times without much change in activity. Furthermore, the anti-kidney cancer properties of CuO NPs/GG nanocomposite were assessed by MTT assay about the cytotoxicity and anti-human on normal (HUVEC) and human kidney cell lines i.e. ACHN, CaKi-2 and HEC293. The corresponding IC50 values were 18.5, 17.2, and 15.6 µg/mL, respectively. The viability of malignant human kidney cell line reduced dose-dependently in the presence of the nano bio-composite. After clinical study, CuO NPs/GG nano bio-composite can be utilized as an efficient drug in the treatment of human kidney cancer in human.

Copper-loaded ZIF-8-based immunosensor for early diagnosis of chronic kidney disease by detecting neutrophil gelatinase-associated lipocalin (NGAL) biomarker

Metal-organic frameworks (MOFs) is a promising contender among the nanomaterials for biosensors due to their special properties, including high surface area, tunable porosity, and adaptable functionalization competences. Zeolitic imidazolate frameworks (ZIFs), a subclass of MOFs, have drawn precise attention for their excellent chemical stability and ease of synthesis. This study, for the first time, concentrates on the preparation and characterization of a Cu-loaded ZIF-8-based immunosensor for the detection of neutrophil gelatinase-associated lipocalin (NGAL), a crucial biomarker for chronic kidney disease (CKD). Loading copper (Cu) into the ZIF-8 framework improves its electrochemical properties, conductivity, and surface area, leading it an ideal platform for antibody immobilization and NGAL detection. The immunosensor utilized Staphylococcal Protein A (SPA) IgG binding protein for antibody immobilization, providing an alternative to traditional crosslinking chemistry, enhancing biosensor functionality. Structural analysis, morphological assessment, elemental mapping, and stoichiometric analysis confirmed the successful synthesis of Cu-loaded ZIF-8 nanocomposite. Assessment of the electrochemical performance of the immunosensor demonstrated sufficiently low limit of detection (80 pg mL−1) over a wide range of 0.1 ng mL−1 to 1000 ng mL−1 of NGAL along with superior selectivity, reproducibility, stability, and clinical feasibility. This advancement contributes to the rising knowledge on MOF-based biosensors and holds promise for future applications in disease diagnosis and healthcare monitoring.

Graphene Oxide Covalently Functionalized with 5-Methyl-1,3,4-thiadiazol-2-amine for pH-Sensitive Ga3+ Recovery in Aqueous Solutions.

A novel graphene-based composite, 5-methyl-1,3,4-thiadiazol-2-amine (MTA) covalently functionalized graphene oxide (GO-MTA), was rationally developed and used for the selective sorption of Ga3+ from aqueous solutions, showing a higher adsorption capacity (48.20 mg g-1) toward Ga3+ than In3+ (15.41 mg g-1) and Sc3+ (~0 mg g-1). The adsorption experiment's parameters, such as the contact time, temperature, initial Ga3+ concentration, solution pH, and desorption solvent, were investigated. Under optimized conditions, the GO-MTA composite displayed the highest adsorption capacity of 55.6 mg g-1 toward Ga3+. Moreover, a possible adsorption mechanism was proposed using various characterization methods, including scanning electron microscopy (SEM) equipped with X-ray energy-dispersive spectroscopy (EDS), elemental mapping analysis, Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Ga3+ adsorption with the GO-MTA composite could be better described by the linear pseudo-second-order kinetic model (R2 = 0.962), suggesting that the rate-limiting step may be chemical sorption or chemisorption through the sharing or exchange of electrons between the adsorbent and the adsorbate. Importantly, the calculated qe value (55.066 mg g-1) is closer to the experimental result (55.60 mg g-1). The well-fitted linear Langmuir isothermal model (R2 = 0.972~0.997) confirmed that an interfacial monolayer and cooperative adsorption occur on a heterogeneous surface. The results showed that the GO-MTA composite might be a potential adsorbent for the enrichment and/or separation of Ga3+ at low or ultra-low concentrations in aqueous solutions.