Element Insertion Sites Research Articles

Transposase expression, element abundance, element size, and DNA repair determine the mobility and heritability of PIF/Pong/Harbinger transposable elements.

Introduction: Class II DNA transposable elements account for significant portions of eukaryotic genomes and contribute to genome evolution through their mobilization. To escape inactivating mutations and persist in the host genome over evolutionary time, these elements must be mobilized enough to result in additional copies. These elements utilize a "cut and paste" transposition mechanism that does not intrinsically include replication. However, elements such as the rice derived mPing element have been observed to increase in copy number over time. Methods: We used yeast transposition assays to test several parameters that could affect the excision and insertion of mPing and its related elements. This included development of novel strategies for measuring element insertion and sequencing insertion sites. Results: Increased transposase protein expression increased the mobilization frequency of a small (430bp) element, while overexpression inhibition was observed for a larger (7,126bp) element. Smaller element size increased both the frequency of excision and insertion of these elements. The effect of yeast ploidy on element excision, insertion, and copy number provided evidence that homology dependent repair allows for replicative transposition. These elements were found to preferentially insert into yeast rDNA repeat sequences. Discussion: Identifying the parameters that influence transposition of these elements will facilitate their use for gene discovery and genome editing. These insights in to the behavior of these elements also provide important clues into how class II transposable elements have shaped eukaryotic genomes.

Ongoing transposition in cell culture reveals the phylogeny of diverse Drosophila S2 sublines.

Cultured cells are widely used in molecular biology despite poor understanding of how cell line genomes change in vitro over time. Previous work has shown that Drosophila cultured cells have a higher transposable element content than whole flies, but whether this increase in transposable element content resulted from an initial burst of transposition during cell line establishment or ongoing transposition in cell culture remains unclear. Here, we sequenced the genomes of 25 sublines of Drosophila S2 cells and show that transposable element insertions provide abundant markers for the phylogenetic reconstruction of diverse sublines in a model animal cell culture system. DNA copy number evolution across S2 sublines revealed dramatically different patterns of genome organization that support the overall evolutionary history reconstructed using transposable element insertions. Analysis of transposable element insertion site occupancy and ancestral states support a model of ongoing transposition dominated by episodic activity of a small number of retrotransposon families. Our work demonstrates that substantial genome evolution occurs during long-term Drosophila cell culture, which may impact the reproducibility of experiments that do not control for subline identity.

Transposon insertion profiling by sequencing (TIPseq) for mapping LINE-1 insertions in the human genome

BackgroundTransposable elements make up a significant portion of the human genome. Accurately locating these mobile DNAs is vital to understand their role as a source of structural variation and somatic mutation. To this end, laboratories have developed strategies to selectively amplify or otherwise enrich transposable element insertion sites in genomic DNA.ResultsHere we describe a technique, Transposon Insertion Profiling by sequencing (TIPseq), to map Long INterspersed Element 1 (LINE-1, L1) retrotransposon insertions in the human genome. This method uses vectorette PCR to amplify species-specific L1 (L1PA1) insertion sites followed by paired-end Illumina sequencing. In addition to providing a step-by-step molecular biology protocol, we offer users a guide to our pipeline for data analysis, TIPseqHunter. Our recent studies in pancreatic and ovarian cancer demonstrate the ability of TIPseq to identify invariant (fixed), polymorphic (inherited variants), as well as somatically-acquired L1 insertions that distinguish cancer genomes from a patient’s constitutional make-up.ConclusionsTIPseq provides an approach for amplifying evolutionarily young, active transposable element insertion sites from genomic DNA. Our rationale and variations on this protocol may be useful to those mapping L1 and other mobile elements in complex genomes.

Molecular characteristic of stable and unstable white gene alleles in highly mutable lines from natural Drosophila melanogaster populations

Mutations in the white locus emerged in highly mutable isofemale Drosophila melanogaster lines from the populations of Novosibirsk 2013 (NS3 line), Nalchik 2014 (N119 line), and Sakhalin Island 2014 (S46 line). A single white-eyed male found in the NS3 line was sterile. Phenotypically mutant derivatives (white gene alleles) differing in eye color (pure white, different shades of yellow (honey), orange (apricot), cherry, and red (wild type)) emerged during the N119 and S46 line breeding in the laboratory. Molecular genetic study of the structure of wild type white locus in initial lines and white-mutant derivatives de novo emerging from them, as well as other white lines from the fund of the Laboratory of Population Genetics of the Institute of Cytology and Genetics (Siberian Branch, Russian Academy of Sciences), was conducted. The pairs of primers flanking different white gene regions were selected. Six such pairs overlapped the coding part of the gene. Molecular genetic analysis demonstrated that most DNA defects were limited to the region which includes the first exon (34 lines). Among them, four mutant events were accompanied by an insertion of DNA fragments of approximately 800 bp; one mutation event was accompanied by a deletion of approximately 200 bp; in 29 cases, no PCR product was obtained (this can indicate that as a minimum one of the primer binding sites is damaged). The inserted DNA fragments have no homology with known D. melanogaster sequences presented in the NCBI database. The complete white gene deletion with the manifestation of mutant “white eyes” phenotype was registered in four cases (and only in the N119 line derivatives). Normal PCR product was obtained in 22 cases for all six DNA fragments. Among them, there are both alleles phenotypically mutant by the eye color (white, cherry, or orange) and revertants to the wild type (red). The abundance of defects in the beginning of the gene can indicate a multiplicity of mobile genetic element insertion sites in this part of the white gene in D. melanogaster.

EpiTEome: Simultaneous detection of transposable element insertion sites and their DNA methylation levels

The genome-wide investigation of DNA methylation levels has been limited to reference transposable element positions. The methylation analysis of non-reference and mobile transposable elements has only recently been performed, but required both genome resequencing and MethylC-seq datasets. We have created epiTEome, a program that detects both new transposable element insertion sites and their methylation states from a single MethylC-seq dataset. EpiTEome outperforms other split-read insertion site detection programs, even while functioning on bisulfite-converted reads. EpiTEome characterizes the previously discarded fraction of DNA methylation at sites of new insertions, enabling future investigation into the epigenetic regulation of non-reference and transposed elements.

RelocaTE2: a high resolution transposable element insertion site mapping tool for population resequencing.

BackgroundTransposable element (TE) polymorphisms are important components of population genetic variation. The functional impacts of TEs in gene regulation and generating genetic diversity have been observed in multiple species, but the frequency and magnitude of TE variation is under appreciated. Inexpensive and deep sequencing technology has made it affordable to apply population genetic methods to whole genomes with methods that identify single nucleotide and insertion/deletion polymorphisms. However, identifying TE polymorphisms, particularly transposition events or non-reference insertion sites can be challenging due to the repetitive nature of these sequences, which hamper both the sensitivity and specificity of analysis tools.MethodsWe have developed the tool RelocaTE2 for identification of TE insertion sites at high sensitivity and specificity. RelocaTE2 searches for known TE sequences in whole genome sequencing reads from second generation sequencing platforms such as Illumina. These sequence reads are used as seeds to pinpoint chromosome locations where TEs have transposed. RelocaTE2 detects target site duplication (TSD) of TE insertions allowing it to report TE polymorphism loci with single base pair precision.Results and DiscussionThe performance of RelocaTE2 is evaluated using both simulated and real sequence data. RelocaTE2 demonstrate high level of sensitivity and specificity, particularly when the sequence coverage is not shallow. In comparison to other tools tested, RelocaTE2 achieves the best balance between sensitivity and specificity. In particular, RelocaTE2 performs best in prediction of TSDs for TE insertions. Even in highly repetitive regions, such as those tested on rice chromosome 4, RelocaTE2 is able to report up to 95% of simulated TE insertions with less than 0.1% false positive rate using 10-fold genome coverage resequencing data. RelocaTE2 provides a robust solution to identify TE insertion sites and can be incorporated into analysis workflows in support of describing the complete genotype from light coverage genome sequencing.

Jitterbug: somatic and germline transposon insertion detection at single-nucleotide resolution.

BackgroundTransposable elements are major players in genome evolution. Transposon insertion polymorphisms can translate into phenotypic differences in plants and animals and are linked to different diseases including human cancer, making their characterization highly relevant to the study of genome evolution and genetic diseases.ResultsHere we present Jitterbug, a novel tool that identifies transposable element insertion sites at single-nucleotide resolution based on the pairedend mapping and clipped-read signatures produced by NGS alignments. Jitterbug can be easily integrated into existing NGS analysis pipelines, using the standard BAM format produced by frequently applied alignment tools (e.g. bwa, bowtie2), with no need to realign reads to a set of consensus transposon sequences. Jitterbug is highly sensitive and able to recall transposon insertions with a very high specificity, as demonstrated by benchmarks in the human and Arabidopsis genomes, and validation using long PacBio reads. In addition, Jitterbug estimates the zygosity of transposon insertions with high accuracy and can also identify somatic insertions.ConclusionsWe demonstrate that Jitterbug can identify mosaic somatic transposon movement using sequenced tumor-normal sample pairs and allows for estimating the cancer cell fraction of clones containing a somatic TE insertion. We suggest that the independent methods we use to evaluate performance are a step towards creating a gold standard dataset for benchmarking structural variant prediction tools.Electronic supplementary materialThe online version of this article (doi:10.1186/s12864-015-1975-5) contains supplementary material, which is available to authorized users.

Detection of Transposable Element Insertion Site Polymorphisms by Sequence-Specific Amplification Polymorphism (SSAP)

Transposable elements represent a major part of any eukaryotic genomes. Notably in plants they can account for more than 80% of the whole genomic sequence (such as in maize). Due to their mobility across the genome, they can act as mutagens but can also be considered as an important source of genetic diversity. It has been shown that they may be activated following various stresses, and it has been assumed that they may contribute to genome evolution and adaptation. Molecular methods have thus been proposed to allow identification of new transposition events, or more generally to tag transposable element insertion site polymorphisms. Sequence-Specific Amplification Polymorphism (SSAP) is a high throughput method derived from AFLP, which has been first tested on the barley genome (Waugh et al., 1997). Its efficiency in tagging TEs in comparison to AFLP is based on the use of specific primers anchored in the TE sequences of interest, requiring the TEs under survey to be previously characterized. SSAP can thus be used to identify any genomic reorganization in the vicinity of TE insertion sites, and still represents an efficient approach to analyse evolutionary dynamics of TEs.

Small RNAs, big impact: small RNA pathways in transposon control and their effect on the host stress response

Transposons are mobile genetic elements that are a major constituent of most genomes. Organisms regulate transposable element expression, transposition, and insertion site preference, mitigating the genome instability caused by uncontrolled transposition. A recent burst of research has demonstrated the critical role of small non-coding RNAs in regulating transposition in fungi, plants, and animals. While mechanistically distinct, these pathways work through a conserved paradigm. The presence of a transposon is communicated by the presence of its RNA or by its integration into specific genomic loci. These signals are then translated into small non-coding RNAs that guide epigenetic modifications and gene silencing back to the transposon. In addition to being regulated by the host, transposable elements are themselves capable of influencing host gene expression. Transposon expression is responsive to environmental signals, and many transposons are activated by various cellular stresses. TEs can confer local gene regulation by acting as enhancers and can also confer global gene regulation through their non-coding RNAs. Thus, transposable elements can act as stress-responsive regulators that control host gene expression in cis and trans.

Genetic heterogeneity revealed by sequence analysis of Mycobacterium tuberculosis isolates from extra-pulmonary tuberculosis patients

BackgroundTuberculosis remains a major public health problem. Clinical tuberculosis manifests often as pulmonary and occasionally as extra-pulmonary tuberculosis. The emergence of drug resistant tubercle bacilli and its association with HIV is a formidable challenge to curb the spread of tuberculosis. There have been concerted efforts by whole genome sequencing and bioinformatics analysis to identify genomic patterns and to establish a relationship between the genotype of the organism and clinical manifestation of tuberculosis. Extra-pulmonary TB constitutes 15–20 percent of the total clinical cases of tuberculosis reported among immunocompetent patients, whereas among HIV patients the incidence is more than 50 percent. Genomic analysis of M. tuberculosis isolates from extra pulmonary patients has not been explored.ResultsThe genomic DNA of 5 extra-pulmonary clinical isolates of M. tuberculosis derived from cerebrospinal fluid, lymph node fine needle aspirates (FNAC) / biopsies, were sequenced. Next generation sequencing approach (NGS) was employed to identify Single Nucleotide Variations (SNVs) and computational methods used to predict their consequence on functional genes. Analysis of distribution of SNVs led to the finding that there are mixed genotypes in patient isolates and that many SNVs are likely to influence either gene function or their expression. Phylogenetic relationship between the isolates correlated with the origin of the isolates. In addition, insertion sites of IS elements were identified and their distribution revealed a variation in number and position of the element in the 5 extra-pulmonary isolates compared to the reference M. tuberculosis H37Rv strain.ConclusionsThe results suggest that NGS sequencing is able to identify small variations in genomes of M. tuberculosis isolates including changes in IS element insertion sites. Moreover, variations in isolates of M. tuberculosis from non-pulmonary sites were documented. The analysis of our results indicates genomic heterogeneity in the clinical isolates.

Allopolyploidy has a moderate impact on restructuring at three contrasting transposable element insertion sites in resynthesized Brassica napus allotetraploids

The role played by whole-genome duplication (WGD) in evolution and adaptation is particularly well illustrated in allopolyploids, where WGD is concomitant with interspecific hybridization. This 'Genome Shock', usually accompanied by structural and functional modifications, has been associated with the activation of transposable elements (TEs). However, the impact of allopolyploidy on TEs has been studied in only a few polyploid species, and not in Brassica, which has been marked by recurrent polyploidy events. Here, we developed sequence-specific amplification polymorphism (SSAP) markers for three contrasting TEs, and compared profiles between resynthesized Brassica napus allotetraploids and their diploid Brassica progenitors. To evaluate restructuring at TE insertion sites, we scored changes in SSAP profiles and analysed a large set of differentially amplified SSAP bands. No massive structural changes associated with the three TEs surveyed were detected. However, several transposition events, specific to the youngest TE originating from the B. oleracea genome, were identified. Our study supports the hypothesis that TE responses to allopolyploidy are highly specific. The changes observed in SSAP profiles lead us to hypothesize that they may partly result from changes in DNA methylation, questioning the role of epigenetics during the formation of a new allopolyploid genome.

Transposing from the Laboratory to the Classroom to Generate Authentic Research Experiences for Undergraduates

Large lecture classes and standardized laboratory exercises are characteristic of introductory biology courses. Previous research has found that these courses do not adequately convey the process of scientific research and the excitement of discovery. Here we propose a model that provides beginning biology students with an inquiry-based, active learning laboratory experience. The Dynamic Genome course replicates a modern research laboratory focused on eukaryotic transposable elements where beginning undergraduates learn key genetics concepts, experimental design, and molecular biological skills. Here we report on two key features of the course, a didactic module and the capstone original research project. The module is a modified version of a published experiment where students experience how virtual transposable elements from rice (Oryza sativa) are assayed for function in transgenic Arabidopsis thaliana. As part of the module, students analyze the phenotypes and genotypes of transgenic plants to determine the requirements for transposition. After mastering the skills and concepts, students participate in an authentic research project where they use computational analysis and PCR to detect transposable element insertion site polymorphism in a panel of diverse maize strains. As a consequence of their engagement in this course, students report large gains in their ability to understand the nature of research and demonstrate that they can apply that knowledge to independent research projects.

Detecting motifs and patterns at mobile genetic element insertion site

Mobile genetic elements (MGEs) occupy major proportion of eukaryotic genomes and are present in significant numbers in prokaryote genomes also. Here we report a new method which extracts a motif at the site of insertion of MGE using tools such as DNA SCANNER. The flanking region of the insertion site is extracted and is analyzed in DNA Scanner for physiochemical properties like protein-interaction measures, energy profiles as well as structural parameters. In case significant signals are observed, the most frequently occurring n-mer (5<n<20) is identified. We observed signals between 9-12 base pairs (bps) upstream in pre-insertion site of Alu element in Human and most frequently occurring motif is found to be TTAAAA. The similar signals and motif is observed at insertion site of B1 element. In lower eukaryotes such as E. histolytica, signals for EhSine1 are found at around 5 bps upstream of insertion and most frequently occurring motif is found to be AAGGT and TCGAA. Signals for Ty3 element in S. cerevisiae are found at 0-3 bps upstream of tRNA, and most frequent motif is GTTCGA (6 bps), GGTTCGA (7 bps) and GGTTCGAT (8 bps). P-element of Drosophila showed remarkable dyad peaks suggesting palindromic site of insertion.

Genome-wide analysis of mobile genetic element insertion sites

Mobile genetic elements (MGEs) account for a significant fraction of eukaryotic genomes and are implicated in altered gene expression and disease. We present an efficient computational protocol for MGE insertion site analysis. ELAN, the suite of tools described here uses standard techniques to identify different MGEs and their distribution on the genome. One component, DNASCANNER analyses known insertion sites of MGEs for the presence of signals that are based on a combination of local physical and chemical properties. ISF (insertion site finder) is a machine-learning tool that incorporates information derived from DNASCANNER. ISF permits classification of a given DNA sequence as a potential insertion site or not, using a support vector machine. We have studied the genomes of Homo sapiens, Mus musculus, Drosophila melanogaster and Entamoeba histolytica via a protocol whereby DNASCANNER is used to identify a common set of statistically important signals flanking the insertion sites in the various genomes. These are used in ISF for insertion site prediction, and the current accuracy of the tool is over 65%. We find similar signals at gene boundaries and splice sites. Together, these data are suggestive of a common insertion mechanism that operates in a variety of eukaryotes.

The Drosophila Inhibitor of Apoptosis (IAP) DIAP2 Is Dispensable for Cell Survival, Required for the Innate Immune Response to Gram-negative Bacterial Infection, and Can Be Negatively Regulated by the Reaper/Hid/Grim Family of IAP-binding Apoptosis Inducers

Many inhibitor of apoptosis (IAP) family proteins inhibit apoptosis. IAPs contain N-terminal baculovirus IAP repeat domains and a C-terminal RING ubiquitin ligase domain. Drosophila IAP DIAP1 is essential for the survival of many cells, protecting them from apoptosis by inhibiting active caspases. Apoptosis initiates when proteins such as Reaper, Hid, and Grim bind a surface groove in DIAP1 baculovirus IAP repeat domains via an N-terminal IAP-binding motif. This evolutionarily conserved interaction disrupts DIAP1-caspase interactions, unleashing apoptosis-inducing caspase activity. A second Drosophila IAP, DIAP2, also binds Rpr and Hid and inhibits apoptosis in multiple contexts when overexpressed. However, due to a lack of mutants, little is known about the normal functions of DIAP2. We report the generation of diap2 null mutants. These flies are viable and show no defects in developmental or stress-induced apoptosis. Instead, DIAP2 is required for the innate immune response to Gram-negative bacterial infection. DIAP2 promotes cytoplasmic cleavage and nuclear translocation of the NF-kappaB homolog Relish, and this requires the DIAP2 RING domain. Increasing the genetic dose of diap2 results in an increased immune response, whereas expression of Rpr or Hid results in down-regulation of DIAP2 protein levels. Together these observations suggest that DIAP2 can regulate immune signaling in a dose-dependent manner, and this can be regulated by IBM-containing proteins. Therefore, diap2 may identify a point of convergence between apoptosis and immune signaling pathways.

Dynamic Genetic Interactions Determine Odor-Guided Behavior inDrosophila melanogaster

Understanding the genetic architecture of complex traits requires identification of the underlying genes and characterization of gene-by-gene and genotype-by-environment interactions. Behaviors that mediate interactions between organisms and their environment are complex traits expected to be especially sensitive to environmental conditions. Previous studies on the olfactory avoidance response of Drosophila melanogaster showed that the genetic architecture of this model behavior depends on epistatic networks of pleiotropic genes. We performed a screen of 1339 co-isogenic p[GT1]-element insertion lines to identify novel genes that contribute to odor-guided behavior and identified 55 candidate genes with known p[GT1]-element insertion sites. Characterization of the expression profiles of 10 p[GT1]-element insertion lines showed that the effects of the transposon insertions are often dependent on developmental stage and that hypomorphic mutations in developmental genes can elicit profound adult behavioral deficits. We assessed epistasis among these genes by constructing all possible double heterozygotes and measuring avoidance responses under two stimulus conditions. We observed enhancer and suppressor effects among subsets of these P-element-tagged genes, and surprisingly, epistatic interactions shifted with changes in the concentration of the olfactory stimulus. Our results show that the manifestation of epistatic networks dynamically changes with alterations in the environment.

Gradients of the Drosophila Chinmo BTB-Zinc Finger Protein Govern Neuronal Temporal Identity

Many neural progenitors, including Drosophila mushroom body (MB) and projection neuron (PN) neuroblasts, sequentially give rise to different subtypes of neurons throughout development. We identified a novel BTB-zinc finger protein, named Chinmo (Chronologically inappropriate morphogenesis), that governs neuronal temporal identity during postembryonic development of the Drosophila brain. In both MB and PN lineages, loss of Chinmo autonomously causes early-born neurons to adopt the fates of late-born neurons from the same lineages. Interestingly, primarily due to a posttranscriptional control, MB neurons born at early developmental stages contain more abundant Chinmo than their later-born siblings. Further, the temporal identity of MB progeny can be transformed toward earlier or later fates by reducing or increasing Chinmo levels, respectively. Taken together, we suggest that a temporal gradient of Chinmo (Chinmo(high) --> Chinmo(low)) helps specify distinct birth order-dependent cell fates in an extended neuronal lineage.

A Taste Receptor Required for the Caffeine Response In Vivo

Caffeine is a methylxanthine present in the coffee tree, tea plant, and other naturally occurring sources and is among the most commonly consumed drugs worldwide. Whereas the pharmacological action of caffeine has been studied extensively, relatively little is known concerning the molecular mechanism through which this substance is detected as a bitter compound. Unlike most tastants, which are detected through cell-surface G protein-coupled receptors, it has been proposed that caffeine and related methylxanthines activate taste-receptor cells through inhibition of a cyclic nucleotide phosphodiesterase (PDE) . Here, we show that the gustatory receptor Gr66a is expressed in the dendrites of Drosophila gustatory receptor neurons and is essential for the caffeine response. In a behavioral assay, the aversion to caffeine was specifically disrupted in flies missing Gr66a. Caffeine-induced action potentials were also eliminated, as was the response to theophylline, the methylxanthine in tea. The Gr66a mutant exhibited normal tastant-induced action potentials upon presentation of theobromine, a methylxanthine in cocoa. Given that theobromine and caffeine inhibit PDEs with equal potencies , these data further support the role of Gr66a rather than a PDE in mediating the caffeine response. Gr66a is the first gustatory receptor shown to be essential for caffeine-induced behavior and activity of gustatory receptor cells in vivo.

Quantitative Trait Loci for Locomotor Behavior inDrosophila melanogaster

Locomotion is an integral component of most animal behaviors and many human diseases and disorders are associated with locomotor deficits, but little is known about the genetic basis of natural variation in locomotor behavior. Locomotion is a complex trait, with variation attributable to the joint segregation of multiple interacting quantitative trait loci (QTL), with effects that are sensitive to the environment. We assessed variation in a component of locomotor behavior (locomotor reactivity) in a population of 98 recombinant inbred lines of Drosophila melanogaster and mapped four QTL affecting locomotor reactivity by linkage to polymorphic roo transposable element insertion sites. We used complementation tests of deficiencies to fine map these QTL to 12 chromosomal regions and complementation tests of mutations to identify 13 positional candidate genes affecting locomotor reactivity, including Dopa decarboxylase (Ddc), which catalyzes the final step in the synthesis of serotonin and dopamine. Linkage disequilibrium mapping in a population of 164 second chromosome substitution lines derived from a single natural population showed that polymorphisms at Ddc were associated with naturally occurring genetic variation in locomotor behavior. These data implicate variation in the synthesis of bioamines as a factor contributing to natural variation in locomotor reactivity.

A Genetic Screen for Suppressors of Drosophila NSF2 Neuromuscular Junction Overgrowth

The Drosophila larval neuromuscular system serves as a valuable model for studying the genes required for synaptic development and function. N-Ethylmaleimide sensitive factor (NSF) is a molecule known to be important in vesicular trafficking but neural expression of a dominant negative form of NSF2 induces an unexpected overgrowth of the Drosophila larval neuromuscular synapse. We have taken a genetic approach to understanding this novel phenotype by conducting a gain-of-function modifier screen to isolate genes that interact with the overgrowth phenotype. Our approach was to directly visualize the neuromuscular junction (NMJ) using a GFP transgene and screen for suppressors of NMJ overgrowth using the Gene Search collection of P-element insertions. Of the 3000 lines screened, we identified 99 lines that can partially restore the normal phenotype. Analysis of the GS element insertion sites by inverse PCR and comparison of the flanking DNA sequence to the Drosophila genome sequence revealed nearby genes for all but 10 of the 99 lines. The recovered genes, both known and predicted, include transcription factors, cytoskeletal elements, components of the ubiquitin pathway, and several signaling molecules. This collection of genes that suppress the NSF2 neuromuscular junction overgrowth phenotype is a valuable resource in our efforts to further understand the role of NSF at the synapse.