Distribution Of Elements Research Articles

Pitting behavior of austenitic stainless-steel welded joints with dense inclusions and methods to enhance pitting resistance

Purpose This study aims to assess the pitting resistance of austenitic stainless steel welded joints fusion zone (FZ) with high density of inclusions before and after surface treatment, including potentiostatic pulse technique (PPT) and pickling. Design/methodology/approach The potentiodynamic polarization tests and critical pitting temperature tests were carried out for estimating pitting resistance. The PPT and pickling were performed as surface treatment. Scanning electron microscope (SEM) and energy dispersive spectrometer were used for characterize the microstructure and elemental distribution. Electron back-scattered diffraction (EBSD) was used to assess the portion of phases and morphology of grains. Findings The weld metal exhibits a higher degree of alloying compared to the base metal, and it contains d-phase and sulfur-containing inclusions. Sulfur-containing inclusions serve as initiation sites for pitting, and they diminish the pitting resistance of weld metal. Both PPT and pickling can remove sulfur-containing inclusions, but PPT causes localized dissolution of the weld metal matrix around the inclusions, while pickling does not. Because of the high density of inclusions, certain pits initiated by PPT are significantly deeper, which makes the formation of stable pitting easier. Because of the high density of inclusions, certain pits initiated by the PPT are deeper. This characteristic facilitates the progression of these initial defects into fully developed, stable pits. Originality/value Analysis of pitting initiation in shielded metal arc welding FZ with PPT and ex situ SEM tracking observation. Explanation of why the PPT surface treatment is not able to enhance the pitting resistance of stainless steel with a high inclusion density.

Structural Evolution of Manganese Prussian Blue Analogue in Aqueous ZnSO4 Electrolyte.

Among different Prussian Blue Analogues (PBAs), manganese hexacyanoferrate (MnHCF), with open framework and two abundant electroactive metal sites, exhibits high potential for the grid-scale aqueous rechargeable zinc-ion batteries (ARZIBs) application. Until now, the intercalation mechanism of Zn2+ into MnHCF has not been clearly illustrated. In this work, combining different synchrotron X-ray techniques, the structural and microscopic evolution of MnHCF in 3 m ZnSO4 electrolyte is comprehensively studied, and a thorough understanding of the intercalation/release dynamic, in terms of local and long-range domain, is provided. The elemental distribution and structural information of Fe, Mn, Zn inside MnHCF electrodes is obtained from the X-ray fluorescence (XRF) elemental maps and X-ray absorption spectroscopy (XAS). The in-depth analysis of extended X-ray absorption fine structure (EXAFS) signals confirm that the rearrangement of Mn site, evidencing the cleavage of the Mn─N bond with the formation of a Mn─O bond, in an octahedral environment. The phase transformation of MnHCF takes place exclusively during the 1st cycle, and a mixture of rhombohedral and cubic zinc hexacynoferrate (ZnHCF) phases are formed during the first charge process. Thereafter, the newly formed cubic ZnHCF phase becomes the only stable one, existing in the subsequent cycles and exhibiting excellent electrochemical stability.

Fibre-reinforced geopolymer (FRG) cemented aeolian sand flexural properties and microproduct evolutionary processes

To reveal the flexural behaviour and microproduct evolution mechanism of FRG cemented aeolian sand, four factors, namely, sodium hydroxide dosage, water-solid ratio, fibre dosage, and fibre length, were classified into mutually independent levels and combined to form a set of test matrices for the design of orthogonal tests. Using DIC digital scattering technology to analyze the evolutionary process of specimen ring-breaking and employing scanning electron microscopy to explore the polymerization product micro-morphology, evolutionary process, pore defects, and analyze the fiber endowment morphology and the destruction mode; the use of EDS spectroscopy, X-ray diffraction, Fourier IR spectroscopy, and other technical means to analyze the polymerization product chemical composition, elemental distribution, and evolutionary characteristics. The results of the study show that the 28-day flexural performance of FRG cemented wind-blown sand as a filling material is significantly affected by various factors in the following order of magnitude: sodium hydroxide dosage > water-solid ratio > fibre dosage > fibre length. The optimal combination from the local test is: sodium hydroxide dosage of 1.4 %, the water-solid ratio of 0.32, the fibre dosage of 0.5 %, and the fibre length of 12 mm. With the increase in load, the value of the displacement field increases continuously, indicating a greater degree of specimen damage. As the reaction proceeds, the polymerization product's morphology evolves from rod-like to flaky, ultimately stabilizing into a network structure. The main elements in the product include C, O, Si, Al, and Ca, indicating that the polymerization product is a C-(A)-S-H gel. A reasonable distribution of discrete ductile fibers can play a positive role inside the specimen, acting as a bridge. The damage behavior under bridging can be divided into fiber debonding, producing slippage behavior, and fiber damage, leading to fracture behavior. The results of the study provide a scientific basis for the design, preparation, and application of solid waste filling materials, thereby promoting the development of materials science and engineering.

Levels of potentially toxic and essential elements in Tocantins River sediment: health risks at Brazil’s Savanna-Amazon interface

The field study aims to address identified research gaps by providing valuable information on the concentration, spatial distribution, pollution levels, and source apportionment of toxic and essential elements in sediment samples from four sampling sites (P1: Beira Rio (urban area), P2: Bananal (rural area), P3: Embiral (rural area), P4: Cidelândia (rural area) distributed along the middle Tocantins River, Brazil. Samples were collected in 2023 from river sections and analyzed using various contamination índices (geoaccumulation index, contamination factor, enrichment factor, pollution load index, sediment pollution index, potential ecological risk coefficients, and integrated risk index). Results indicated that the levels of aluminum, iron, manganese, and selenium exceeded legal standards in that year. Chromium, nickel, copper, zinc, and lead exceeded guidelines, mainly in section P1 for aluminum and section P3 for nickel and lead. Rainy months showed increased presence, indicating seasonal variability. The geoaccumulation index indicated low pollution levels, with lead and nickel notably present near urban and industrial areas. The enrichment factor highlighted elevated concentrations of lead and zinc in industrial areas. Both PLI and SPI indices raise concerns regarding Pb (P4) and Zn (P3) concentrations at specific times of the year. Overall, potential ecological risks were deemed low for most sites. Continuous monitoring and interventions are crucial to preserve water and environmental quality in the region.

Twin Peaks: Interrogating Otolith Pairs to See Whether They Keep Their Stories Straight

To tackle the question of the reliability of otoliths as recorders of individual life events, we compared the information enclosed in otolith pairs: the sagittae pair and the sagitta/lapillus pair. We used the synchrotron XRF scanning imaging method, which enabled the comparison of this information at both global and hyperfine scales. Using otoliths of diadromous pipefish, we compared element incorporation in each pair with a focus on (i) environment and transition between water bodies with strontium (Sr) and heavy metals, (ii) temporal information and age estimation based on sulphur (S) incorporation, and (iii) otolith growth and biomineralization processes with zinc (Zn). Results show that the global information in terms of Sr and heavy metals given by both otoliths of a pair is the same and that any otolith may be used to retrieve such global data. In terms of S-based growth increment counts, the numbers are the same between two otoliths of the same kind, but the sagitta/lapillus pairs show a significant difference. Hyperfine-scale analysis of element distribution reveals that a given otolith is under the control of specific growth mechanisms, which can lead to heterogeneous elemental incorporation. The present results lead us to consider otolith growth dynamics and biomineralization processes in the context of a fluid mosaic perspective.

Placental Element Content Assessed via Synchrotron-Based X-ray Fluorescence Microscopy Identifies Low Molybdenum Concentrations in Foetal Growth Restriction, Postdate Delivery and Stillbirth

Placental health and foetal development are dependent upon element homeostasis. Analytical techniques such as mass spectroscopy can provide quantitative data on element concentrations in placental tissue but do not show spatial distribution or co-localisation of elements that may affect placental function. The present study used synchrotron-based X-ray fluorescence microscopy to elucidate element content and distribution in healthy and pathological placental tissue. The X-ray fluorescence microscopy (XFM) beamline at the Australian Synchrotron was used to image trace metal content of 19 placental sections from healthy term (n = 5, 37–39 weeks), foetal growth-restricted (n = 3, <32 weeks, birth weight <3rd centile), postdate (n = 7, >41 completed weeks), and stillbirth-complicated pregnancies (n = 4, 37–40 weeks). Samples were cryo-sectioned and freeze-dried. The concentration and distribution of fourteen elements were detected in all samples: arsenic, bromine, calcium, chlorine, copper, iron, molybdenum, phosphorous, potassium, rubidium, selenium, strontium, sulphur, and zinc. The elements zinc, calcium, phosphorous, and strontium were significantly increased in stillbirth placental tissue in comparison to healthy-term controls. Strontium, zinc, and calcium were found to co-localise in stillbirth tissue samples, and calcium and strontium concentrations were correlated in all placental groups. Molybdenum was significantly decreased in stillbirth, foetal growth-restricted, and postdate placental tissue in comparison to healthy-term samples (p < 0.0001). Synchrotron-based XFM reveals elemental distribution within biological samples such as the placenta, allowing for the co-localisation of metal deposits that may have a pathological role. Our pilot study further indicates low concentrations of placental molybdenum in pregnancies complicated by foetal growth restriction, postdate delivery, and stillbirth.

Tissue Distribution and Toxicological Risk Assessment of Mercury and Other Elements in Northern Populations of Wolverine (Gulo gulo).

Wolverines are facultative scavengers that feed near the top of terrestrial food chains. We characterized concentrations of mercury and other trace elements in tissues of wolverine from a broad geographic area, representing much of their contemporary distribution in northwestern North America. We obtained tissues from 504 wolverines, from which mercury was measured on muscle (n = 448), kidney (n = 222), liver (n = 148), hair (n = 130), and brain (n = 52). In addition, methylmercury, seven trace elements (arsenic, cadmium, chromium, cobalt, lead, nickel, selenium), and arsenic compounds were measured on a subset of samples. Concentrations of mercury and other trace elements varied between tissues and were generally highest in kidney compared to brain, liver and muscle. Mercury was predominately as methylmercury in brain and muscle, but largely as inorganic mercury in liver and kidney. Mercury concentrations of hair were moderately correlated with those of internal tissues (Pearson r = 0.51-0.75, p ≤ 0.004), making hair a good non-lethal indicator of broad spatial or temporal differences in mercury exposure to wolverine. Arsenobetaine was the dominant arsenic compound identified in tissues, and arsenite, arsenocholine and dimethylarsinic acid were also detected. A preliminary risk assessment suggested the cadmium, lead, mercury, and selenium concentrations in our sample of wolverines were not likely to pose a risk of overt toxicological effects. This study generated acomprehensive dataset on mercury and other trace elements in wolverine, which will support future contaminants study of this northern terrestrial carnivore.

Investigation of effective parameters on Fe/Ta thin films by plasma focus device: number of shots and distance from tip anode

This experimental investigation is the first to generate a surface iron-tantalum (Fe/Ta) alloy as a sublayer-layer using a plasma focus device. Examining how ion beams from a plasma focus device alloy iron and tantalum with varying melting points is one of the key objectives of this study. Fe/Ta thin film nanostructure and surface morphology were also examined. The distance from the tip anode and the varied number of shots are the experimental variables. Although tantalum's melting point (3020 ∘C\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ{\\rm C}$$\\end{document}) is generally known to be near to that of iron (2862 ∘C\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ{\\rm C}$$\\end{document}), it is possible that iron vaporizes and partial alloying of iron with tantalum occurs before tantalum reaches its melting point. Fe/Ta thin film identification techniques include scanning electron microscopy, mapping of cross-section, energy dispersive X-ray spectroscopy, and X-ray diffraction pattern. Additionally, the composition of multilayer structures is examined using EDS. In conclusion, the results of the X-ray diffraction pattern showed that the number of shots had a significant impact on the residual strain degree of the thin films that were deposited. Furthermore, structures made of FeTa and Fe2Ta were produced. Additionally, photos from scanning electron microscopy and cross-section mapping verify that the sample with five shots at an 8 cm distance from the tip anode formed a uniform Fe/Ta alloy structure. The sample with five shots at a distance of 4 cm from the tip anode formed micro-island structures, as seen by scanning electron microscopy, with decreasing distance. Furthermore, depth elemental distribution revealed that the optimal depth of penetration in a homogenous material to develop alloying is best determined by number of PF shots.

Phase evolution in Ni-based superalloy K439B during thermal process

Based on the difference in element distribution and diffusion in various regions, the phase transformation of the as-cast, heat-treated and long-term aged K439B superalloys was investigated. Ti, Nb, Ta and Al elements segregated to the interdendritic regions, whereas W, Co and Cr elements segregated to the dendrite core regions in the as-cast alloy. During thermal process, the γ/γ' eutectic and the irregular γ' phase formed in the as-cast alloy completely dissolved into γ matrix. Subsequently, the reprecipitated spherical γ' phase gradually grew up and tended to be cubic. γ' phase was surrounded by the dislocations and a few stacking faults, which reduced the elastic strain energy in the long-term aged alloy. In addition, the degeneration of MC carbide was caused by a discrepancy in element diffusion rate and driving force in the interdendritic and grain boundary regions. The degeneration of MC carbide promoted the precipitation of γ' phase, M23C6 carbide and η phase, M23C6 carbide precipitated from γ matrix and γ' phase transformed into η phase. The preferential precipitation of M23C6 carbide was related to the difference in crystal structure, precipitation temperature range and Gibbs free energy.

Distributions of nutrients, trace metals, phytoplankton composition, and elemental consumption in the Ross and Amundsen Seas

The Southern Ocean (SO) not only functions as a critical carbon sink but also serves as a crucial source of intermediate and deep waters to lower latitudes. The Ross Sea and Amundsen Sea in the West Antarctic are highly productive regions of the Southern Ocean, critically vulnerable to climate change. Hence, comprehending the source-sink patterns of nutrients, particularly trace metals, in these regions is of paramount significance for understanding their ecological effect and the effect on elemental distribution in global ocean. Here, we reported the surface and vertical distributions of phytoplankton composition, Chlorophyll-a (Chl-a), particulate organic carbon (POC), macronutrients, and trace metals (TMs) in the Ross and Amundsen Seas. Deplete dissolved iron concentrations were observed in surface waters averaging 0.17 ± 0.09 nM. High POC and Chl-a were observed that corresponded to elevated Fe in shallow subsurface water (100–300 m), while low POC and Chl-a were found to associate with depleted iron (~0.1 nM) throughout the upper water column down to 300 m. Sea-ice melting and islands were found to be possible external TMs sources in the Amundsen Sea offshore. Phytoplankton act as a sink for trace metals and regulate the elemental concentration and composition of water bodies, while also being influenced by environmental conditions such as temperature, salinity, and the mixing layer depth. Elemental consumptions in surface water were associated with diatom abundance in both Ross and Amundsen Seas. Based on elemental drawndown ratios in the surface mixed layer, the stoichiometries of the two major phytoplankton functional groups, diatoms and haptophytes, were estimated. Our observations offered insights into elemental distribution patterns and the regulation of iron supply to phytoplankton and export potential in the Southern Ocean.

Assessing spatial distribution of bioindicator elements in various cutaneous tumors using correlative imaging with laser-ablation-based analytical methods

Correlative imaging of cutaneous tumors provides additional information to the standard histopathologic examination. However, the joint progress in the establishment of analytical techniques, such as Laser-Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) in clinical practice is still limited. Their combination provides complementary information as it is also shown in our study in terms of major biotic (Ca, Mg, and P) and trace (Cu and Zn) elements. To elucidate changes in the elemental composition in tumors, we have compiled a set of malignant tumors (Squamous Cell Carcinoma, Basal Cell Carcinoma, Malignant Melanoma, and Epithelioid Angiosarcoma), one benign tumor (Pigmented Nevus) and one healthy-skin sample. The data processing was based on a methodological pipeline involving binary image registration and affine transformation. Thus, our paper brings a feasibility study of a practical methodological concept that enables us to compare LIBS and LA-ICP-MS results despite the mutual spatial distortion of original elemental images. Moreover, we also show that LIBS could be a sufficient pre-screening method even for a larger number of samples according to the speed and reproducibility of the analyses. Whereas LA-ICP-MS could serve as a ground truth and reference technique for preselected samples.

A real-world study of the differences in Traditional Chinese Medicine diagnosis and treatment rules for coronavirus disease 2019 between Northern and Southern China.

To explore the differences in Traditional Chinese Medicine (TCM) diagnosis and treatment rules for coronavirus disease 2019 (COVID-19) between Northern and Southern China based on the real-world data from 982 COVID-19 patients. All consecutive cases of COVID-19 admitted to the TCM department of designated COVID-19 hospitals in eight provinces and cities were retrospectively analyzed. Patients were divided into a Northern and a Southern group according to the location of the admitting hospital. The symptoms, syndrome elements, syndrome distribution and herbal treatments were analyzed. The core prescriptions were extracted using the multiscale backbone-based network comparison algorithm (msbNC). The distribution of syndrome elements showed that dampness was common in Northern and Southern China, wind and heat were more often present in the South, while fire toxin and spleen deficiency were more often encountered in the North. The distribution of syndromes showed that the South was dominated by heat dampness accumulating in the lung (55.69%), while the North was dominated by dampness-toxin stagnating in the lung (44.90%).The results of core prescription mining showed that dispelling dampness, dispersing wind, clearing heat and strengthening spleen were the common treatment methods in Northern and Southern China. For mild cases, Jinyinhua (Flos Lonicerae) and Lianqiao (Fructus Forsythiae Suspensae) were often used in the South to clear heat and relieve exterior symptoms, while Chaihu (Radix Bupleuri Chinensis) and Huangqin (Radix Scutellariae Baicalensis) were often used in the North to relieve muscles by expelling heat. For moderate cases, Chaihu (Radix Bupleuri Chinensis), Qinghao (Herba Artemisiae Annuae), and Shigao (Gypsum Fibrosum) were often used to clear heat of Tri-jiao Channel and stomach in the South, while Fuling (Poria), Chenpi (Pericarpium Citri Reticulatae), and Dangshen (Radix Codonopsis) were often used to invigorate spleen and remove dampness in the North. For severe cases, spleen invigoration and dampness removal as well as relaxing the bowels and discharging heat were often used in the North. There were certain North-South differences in terms of symptoms, syndrome elements and syndrome distribution of COVID-19, as well as differences in core prescriptions during different periods of the disease. The regional differences in the rules of TCM diagnosis and treatment for COVID-19 should be further considered in the process of optimization and revision of relevant treatment guidance.

Effect of T6I6 tempering on the coherence between core/shell precipitates and a solid solution in the 2024 aluminium alloy

Heat treatment of materials, including—in particular—two-stage T6I6 treatment, enables the nucleation of precipitates with a two-phase structure: core and shell. The above-mentioned treatment can be used to harden materials by selecting suitable treatment parameters and the chemical composition of the material that initiates a selective diffusion of the alloying elements. In this paper, tests of the T6I6 treatment were carried out on the EN AW-2024 alloy. The aluminium alloy was subjected to T6I6 treatment, and then the element distribution map was examined within the precipitate using the EDS method. The mechanical properties of the precipitate were tested using the nanoindentation method, and the kinetics of the formation of the precipitate were analysed using DSC. The impact of two-phase precipitates on the mechanical properties was determined through a static strength test, whereas the impact of the structure on the above-mentioned mechanical properties was determined based on HR-TEM observations. The results of the study confirmed the formation of a precipitate with a two-phase structure (shell; core) in the EN AW-2024 alloy, as well as the kinetics of their formation as a function of the parameters of the T6I6 process, such as temperature, duration and cooling rate. Strength tests confirmed an increase in the strength of the alloy to Rm = 520 MPa, with elongation remaining the same at A = 13.2%. HR-TEM observations, in turn, proved that the shell forming on the core is coherent with solid solution α, which means that the hardening of the alloy may occur as a sum of the Mott-Nabarro, Friedel and Ashby-Orowan mechanisms.

Analysis of CeO2/SiO2 double-layer thin film stack with antireflection effect for silicon solar cells

This study introduces CeO2/SiO2 double-layer film stacks and its antireflection coating effect. Optical properties were analyzed by spectrophotometer measurements; surface morphology and cross-sections were observed by Scanning Electron Microscopy (SEM); elemental distributions and crystallographic properties were determined by Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD) measurements. Average reflectance of single-layer 0.3MSiO2, 0.6MSiO2, and 0.3MCeO2 thin films were 30.54%, 20.12%, and 14.23%, respectively. Average reflectance was decreased significantly down to 5.9% by 0.3MCeO2/0.6MSiO2 double-layer thin films comparing to those of the results of single-layer films and bare silicon surface reflection (~40%). Antireflective effect of the films on solar cells was estimated by simulation using the measured reflection data. Simulated solar cells indicate that 0.3MCeO2/0.6MSiO2 double-layer antireflective coatings are capable to increase the efficiency significantly and conversion efficiency of 21.7% could be achieved.

Pulsed directed energy deposition-arc technology for depositing stainless steel 309L: Microstructural, elements distribution, and mechanical characteristics

In recent years, additive manufacturing has increased in prominence as a primary method of manufacturing around the globe. Modern metal additive manufacturing presents an innovative approach to manufacturing complex structures for the aerospace, energy, and construction sectors, due to technological advancements. In the present study, the austenitic stainless steel 309L (SS-309L) thick wall component was manufactured employing pulsed current gas tungsten arc welding (PC-GTAW) WAAM technology. The metallurgical characteristics of the as-deposited SS-309L thick wall part were evaluated. The investigation of material characteristics in the manufactured areas encompasses a study of cross-sectional (CS) and transverse-sectional (TS) regional portions, specifically the upper, middle, and lower regions. The microstructures of the CS and TS planes showed austenite, columnar, and delta ferrite dendrites in the upper, middle, and lower regions, respectively. The CS sample reveals the greatest grain size at 159.4 μm, following the EBSD investigation. The average size of the grains across the TS is 127.09 μm. The thermal cycles in multi-layer production result in changes in grain size. The microhardness in the transverse sectional regions is higher than in the CS regions, measuring average values of 257 HV, 253 HV, and 251 HV for the upper, middle, and lower sections, respectively. The ultimate tensile strengths (UTS) in the cross-sectional parts are 656 MPa, whereas in the transverse regions it was 661 MPa for the topmost regions. This study investigates the correlation among the mechanical and metallurgical properties of wire arc additively fabricated SS-309L austenite steel material.

Dual‐gradient Concentration Distribution in Sb‐Cu Alloy Nanoarrays for Robust Sodium‐ionStorage

Alloy‐type materials are attractive for anodes in sodium‐ion batteries (SIBs) owing to their high theoretical capacities and overall performance. However, the accumulation of stress/strain during repeated cycling results in electrode pulverization, leading to rapid capacity decay and eventual disintegration, thus hindering their practical applications. Herein, we report a 3D coral‐like Sb‐Cu alloy nanoarray with gradient distribution of both elements. The array features a Sb‐rich bottom and a Cu‐rich top with increasing Sb and decreasing Cu concentrations from top to bottom. The former is the active component that provides the high capacity, whereas the latter serves as an inert additive that acts against volume variation. The gradual transition in composition within the electrode introduces a ladder‐type volume expansion effect, facilitating a smooth distribution and effective release of stress, thereby ensuring the wanted mechanical stability and structural integrity. The as‐developed nanoarray affords a high reversible capacity (460 mAh g−1 at 0.5 C), stable cycling (89% retention over 120 cycles at 1.0 C), and superior rate capability (354 mAh g−1 at 10 C). The concentration dual‐gradient strategy paves a new pathway of designing alloy‐type materials for SIBs.

Dual-gradient Concentration Distribution in Sb-Cu Alloy Nanoarrays for Robust Sodium-ionStorage.

Alloy-type materials are attractive for anodes in sodium-ion batteries (SIBs) owing to their high theoretical capacities and overall performance. However, the accumulation of stress/strain during repeated cycling results in electrode pulverization, leading to rapid capacity decay and eventual disintegration, thus hindering their practical applications. Herein, we report a 3D coral-like Sb-Cu alloy nanoarray with gradient distribution of both elements. The array features a Sb-rich bottom and a Cu-rich top with increasing Sb and decreasing Cu concentrations from top to bottom. The former is the active component that provides the high capacity, whereas the latter serves as an inert additive that acts against volume variation. The gradual transition in composition within the electrode introduces a ladder-type volume expansion effect, facilitating a smooth distribution and effective release of stress, thereby ensuring the wanted mechanical stability and structural integrity. The as-developed nanoarray affords a high reversible capacity (460 mAh g-1 at 0.5 C), stable cycling (89% retention over 120 cycles at 1.0 C), and superior rate capability (354 mAh g-1 at 10 C). The concentration dual-gradient strategy paves a new pathway of designing alloy-type materials for SIBs.

A discovery of nanoscale sulfide droplets in MORB glasses: implications for the immiscibility of sulfide and silicate melts

Sulfur forms an immiscible liquid upon saturation in magma, and sulfide droplets are commonly found in fresh mid-ocean ridge basalt (MORB). Scanning electron microscopy (SEM) analysis revealed that the fine-grained and weakly phyric MORB samples exhibited hypocrystalline to vitreous textures. Transmission electron microscopy (TEM) of MORB glasses exhibits nanoscale sulfide droplets (10–15 nm) with rounded shapes and smooth edges, showing crystalline and homogeneous composition. Elemental distribution included S, Fe, Cu, and Ni, while Si, Al, and O were lacking. Prior research clarified the immiscibility between sulfide and silicate melts, impacting the size distribution of sulfide droplets. This is the first report on nanoscale sulfide droplets within MORB glasses, and these results suggest that nanoscale sulfide droplets represent the initial phase of sulfide saturation. Such an insight may prove useful in understanding how siderophile and chalcophile elements behaved during sulfide crystallization. In addition, this study determines the immiscibility of sulfides and silicate melts that occur in the early nanometer stage. Therefore, it is speculated that immiscibility phenomena may occur in the nanometer stage during magma evolution.

Temperature-Sensitive Template for Preparation of ZnO/CeO2 Composite Photocatalytic Materials and Its Catalytic Performance

In this work, a series of thermosensitive ionic liquid functionalized polymers, PNx(IL)y, with controllable morphology and particle size were prepared by free radical polymerization. Then, using the polymer PN64(IL)8 with uniform morphology as a templating agent, the ZnO composite photocatalytic materials doped with rare earth metal Ce were prepared in combination with a microwave-assisted and templated hydrothermal reaction method. Series different Ce-doping amount photocatalytic materials ZnO-Ce-x‰ were characterized by XRD, SEM, TEM, XPS, and other methods. The results demonstrated that the templated materials PN64(IL)8 can prepare ZnO-Ce-2‰ with uniform petaloid ambulacra shape, good distribution of elements, and excellent photocatalytic performance. Photocatalytic degradation experiments of methyl orange (MO) showed that when the Ce-doping amount is only 2‰, the degradation rate of organic dyes can reach 96.5% by reacting the photocatalytic materials in water for 1 h. In addition, this kind of photocatalyst can be used for the degradation of high-concentration MO, as well as being easily recovered and effectively reused by simple filtration. Therefore, the structure of this kind of photocatalyst is controllable in the preparation process with an extremely low Ce-doping amount compared with current reports, and it has a good application prospect in the field of wastewater treatment technology.

Multi-layer structured AlN/Er2O3 coating: Enhanced thermal stability and hydrogen isotope permeation resistance

AlN/Er2O3 multi-layer coatings, as a novel hydrogen isotope permeation barrier for nuclear reactor and hydrogen energy field, were prepared by magnetron sputtering coupled with metal-organic decomposition on the surface of reduced activation ferrite/martensitic steel. The thickness of the Er2O3 layers was adjusted by spin coating several times, the adhesion of the layers was tested with a micron scratch tester, and the microstructure and surface composition of the layers were analyzed by TEM and XPS. The results indicate the absence of evident crack holes on the coating surface, uniform distribution of elements without segregation, and satisfactory densification. In comparison with the individual Er2O3 coating, the multi-layer coating incorporating AlN as the interlayer exhibits enhanced adhesion strength, which could effectively mitigate the thermal mismatch phenomenon of Er2O3 under high temperature conditions. Electrochemical hydrogen permeation and high temperature gas pressure driven deuterium permeation tests demonstrated that the permeability resistance of the AlN/Er2O3 coating does not linearly increase with its thickness. The hydrogen permeation reduced factor of the coating reaches its maximum value when the thickness of the Er2O3 coating is 1500 nm.