Electrospun Nanofiber Membranes Research Articles

Morphological effect of fabricated surfaces obtained from fluorinated porphyrin based copolymer for oxygen and pressure sensing applications

Good oxygen sensitivity and fast response of oxygen probe is primary requirement for pressure sensing applications. Therefore in this study, porphyrin based new fluorinated oxygen probe (OP) monomer was synthesized and copolymerized with 2-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)ethyl methacrylate (SCMHBMA), octafluoropentyl methacrylate (OCFPM) and butyl acrylate (BA). SCMHBMA may play important biological role in cell adhesion. OCFPM and BA were used as fluorinated and non-fluorinated monomers, respectively. The synthesized oxygen sensitive copolymer (OSC) was used to fabricate spin coated film and membranes of electrospun beaded nanofibers and only nanofibers. Morphological effect of fabricated surfaces was evaluated in terms of oxygen sensitivity, response time and pressure sensitivity. The surface of beaded nanofibers was considered transition state between plain spin coated films surface and fibrous membrane. Nanofibers membrane showed highest oxygen sensitivity (I0/I 36.7) and pressure sensitivity (0.92 %) among all the surfaces. Moreover, nanofibers membrane exhibited fast response to oxygen (t95% 0.6 s). Moreover, the electrospun nanofiber membrane was found biocompatible by inherent culture of HeLa cells. Hence, the fabricated membranes may find applications in pressure mapping of biological systems and unsteady surfaces.

Electrospun Nanofiber Membrane: An Efficient and Environmentally Friendly Material for the Removal of Metals and Dyes.

With the rapid development of nanotechnology, electrospun nanofiber membranes (ENM) application and preparation methods have attracted attention. With many advantages such as high specific surface area, obvious interconnected structure, and high porosity, ENM has been widely used in many fields, especially in water treatment, with more advantages. ENM solves the shortcomings of traditional means, such as low efficiency, high energy consumption, and difficulty in recycling, and it is suitable for recycling and treatment of industrial wastewater. This review begins with a description of electrospinning technology, describing the structure, preparation methods, and factors of common ENMs. At the same time, the removal of heavy metal ions and dyes by ENMs is introduced. The mechanism of ENM adsorption on heavy metal ions and dyes is chelation or electrostatic attraction, which has excellent adsorption and filtration ability for heavy metal ions and dyes, and the adsorption capacity of ENMs for heavy metal ions and dyes can be improved by increasing the metal chelation sites. Therefore, this technology and mechanism can be exploited to develop new, better, and more effective separation methods for the removal of harmful pollutants to cope with the gradually increasing water scarcity and pollution. Finally, it is hoped that this review will provide some guidance and direction for research on wastewater treatment and industrial production.

Preparation of Electrospun Membranes and Their Use as Separators in Lithium Batteries

In this work, electrospun nanofiber membranes are investigated as separators for lithium batteries. Membrane consisting of polyacrylonitrile-polycaprolactone mixtures were produced following a combinatorial approach inspired by design of experiments to identify the relationships between process parameters and microstructural properties. The microstructure of the non-woven fibrous mats was characterized by scanning electron microscopy to measure thickness and fiber distribution. Temperature and relative humidity during membrane deposition were also tracked to include them in the statistical analysis and highlight their influence on the properties of the resulting membranes. The functional evaluation of the membranes was conducted by electrochemical impedance spectroscopy, after soaking the membrane in the electrolyte, to measure ion transport properties. All the separators showed specific conductivities higher than 1.5 × 10−3 S. The electrochemical performance was also evaluated when the membranes were used as actual separators in coin-cells assembled in-house, stacking the electrolyte-soaked membranes between a lithium anode and a LiFePO4-based cathode. Among all, the PAN/PCL 50:50 showed excellent cycling stability, with a high initial capacity of 150 mAhg−1 and a coulombic efficiency of 99.6%.

Fabrication and Properties of the Multifunctional Rapid Wound Healing Panax notoginseng@Ag Electrospun Fiber Membrane

The Panax notoginseng@Ag core/shell electrospun fiber membrane was prepared by coaxial electrospinning combined with the UV reduction method (254 nm). The prepared Panax notoginseng@Ag core/shell nanofiber membrane has a three-dimensional structure, and its swelling ratio could reach as high as 199.87%. Traditional Chinese medicine Panax notoginseng can reduce inflammation, and the silver nanoparticles have antibacterial effects, which synergistically promote rapid wound healing. The developed Panax notoginseng@Ag core/shell nanofiber membrane can effectively inhibit the growth of the Gram-negative bacteria Escherichia coli and the Gram-positive bacteria Staphylococcus aureus. The wound healing experiments in Sprague Dawley mice showed that the wound residual area rate of the Panax notoginseng@Ag core/shell electrospun nanofiber membrane group was only 1.52% on day 9, and the wound of this group basically healed on day 12, while the wound residual area rate of the gauze treatment group (control group) was 16.3% and 10.80% on day 9 and day 12, respectively. The wound of the Panax notoginseng@Ag core/shell electrospun nanofiber membrane group healed faster, which contributed to the application of the nanofiber as Chinese medicine rapid wound healing dressings.

Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing

Electrospun nanofiber membranes show high potential in various application fields (e.g., filtration, catalysis, and sensing). Nevertheless, knowledge of the mechanical behavior, and more specifically, the deformation of nanofiber membranes is still limited today which can complicate the appliance of nanofiber membranes in applications where they are mechanically loaded. In this paper, we, therefore, analyzed the mechanical behavior of polymeric nanofiber membranes with different fiber orientations (random and aligned) extensively. Polyamide 6 was used as a representative reference polymer for proof-of-concept. Mechanical tests show that all membranes have a coherent deformation behavior at the macroscale up to the point of fracture. Large variations in stiffness, ultimate strength, and ultimate strain were observed between membranes with different fiber orientations (Random: E-mod: 370 ± 34 MP; UTS: 38.5 ± 6.0 MPa; εmax: 30.0 ± 2.8%; Parallel aligned: E-mod: 753 ± 11 MPa; UTS: 55.4 ± 0.8 MPa; εmax: 12.0 ± 0.1%; Perpendicular aligned: E-mod: 24.1 ± 3.7 MPa; UTS:/; εmax: >40%). This shows the versatility and tunability of the mechanical behavior of these nanofiber membranes. At the microscale, the fibrous structure results in deformation mechanisms that resist failure formation and progression when the membrane is mechanically loaded. This results in a high fracture resistance, even for pre-damaged membranes. Realignment of the fibers along the loading direction causes crack tip blunting, locally reinforcing the membrane.

Curcumin-stabilized silver nanoparticles encapsulated in biocompatible electrospun nanofibrous scaffold for sustained eradication of drug-resistant bacteria

Due to the misuse of antibiotics, the emerging drug-resistance of pathogenic microbes has aroused considerable concerns for the public health, which demands the continuous search for safe and efficient antimicrobial treatment. In this study, curcumin reduced and stabilized silver nanoparticles (C-Ag NPs) were successfully encapsulated into electrospun nanofiber membranes consisted of polyvinyl alcohol (PVA) cross-linked by citric acids (CA), which exhibited desirable biocompatibility and broad-spectrum antimicrobial activities. The homogeneously distributed and sustained release of C-Ag NPs in the constructed nanofibrous scaffolds yield prominent killing effect against Escherichia coli, Staphylococcus aureus and Methicillin-resistant Staphylococcus aureus (MRSA), which involved the reactive oxygen species (ROS) generation. Outstanding elimination of bacterial biofilms and excellent antifungal activity against Candida albicans was also identified after treated with PVA/CA/C-Ag. Transcriptomic analysis on MRSA treated by PVA/CA/C-Ag revealed the antibacterial process is related to disrupting carbohydrate and energy metabolism, as well as destroying bacterial membranes. Significant down-regulation of the expression of multidrug-resistant efflux pump gene sdrM was observed pointing to the role of PVA/CA/C-Ag to overcome the bacterial resistance. Therefore, the constructed ecofriendly and biocompatible nanofibrous scaffolds provide a robust and versatile nanoplatform of reversal potential to eradicate drug-resistant pathogenic microbe in environmental as well as healthcare applications.

A proposed Fuzzy logic model for Electrospun nanofiber pressurised membranes for water treatment- A review

Electrospun nanofiber membranes and nanocomposites for water treatment is an emerging concept growing faster in science, gaining more prominence among various scientists, and creating attention to improve water quality. The familiarity with fabricating these materials is increased, and researchers worldwide target more nanomaterial manufacturing and synthesis for several applications. The electrospinning process for nanofibers' preparation allows polymers to incorporate various functionalized materials. Scientists have recently proposed electrospun membranes using fluorinated compounds and polymers with hydrocarbons. The membranes prepared by the electrospun nanofiber to purify water created a primary research axis, and various laboratory experiments proved efficient. In recent years, the usage of fuzzy analysis in industries has increased, and these logics are applied in every unit process of the water industry. The present review primarily discusses the recent pressurized electrospun membrane technologies utilized in the water industries and machine learning methods that can be applied in the water industries. Further, it suggests a new novel way of integrating options to connect the fuzzy with water treatment to enhance the electrospun nanofiber prospects in the water industry. Implementing these fuzzy models in future by water industries might reduce maintenance costs and help in understanding the characteristics of the effluent quality in detail.

Synthesis of transparent electrospun composite nanofiber membranes by asymmetric solvent evaporation process

Currently, transparent and flexible electrospun nanofiber membranes have attracted considerable attention due to their potential use in electronic displays, solar cells, air filtration, and medical and health fields (i.e., transparent wound dressings). Developing transparent nanofibrous membranes is still very intriguing because of severe light reflection and absorption into the fibrous membranes. Herein, we report a successful fabrication technique of transparent composite nanofibrous membranes by combining electrospinning and a particular post-treatment of the prepared membranes. Firstly, randomly organized polyurethane (PU) nanofibers were prepared via electrospinning. These PU nanofibers mats were then impregnated into different concentrations (i.e., 5, 10, and 15 wt%) and embedded time (i.e., 30 and 60 min) of poly (methyl methacrylate) (PMMA) and polydimethylsiloxane (PDMS) solutions to prepare transparent composite nanofibrous membrane using solution immersion technique. The resulting composite nanofibrous membranes exhibit excellent performance, including optical transparency (i.e., up to 82% for PMMA and ∼ 6% for PDMS), lacking affinity to water, mechanically robust, reasonable water vapor transmission rate (WVTR, ∼ 1 kg/m2 day), and good thermal stability. The composite nanofiber membranes have promising optical transparency, suitable mechanical strength, and high hydrophobicity. Therefore, they have the potential in various applications, including windshields for highly moving objects, displays, and particularly as transparent wound dressings in medicine.

Sustained Release of Dicumarol via Novel Grafted Polymer in Electrospun Nanofiber Membrane for Treatment of Peritendinous Adhesion.

The prevention and treatment of post-traumatic peritendinous adhesion (PA) have always been a great difficulty for orthopedic surgeons. Current treatments include resecting surgery, non-steroidal anti-inflammatory drugs (NSAIDs) usage and implantable membranes, often target single disease pathogenic processes, resulting in unfavorable therapeutic outcomes. Here a polylactic acid (PLA)-dicumarol conjugates-electrospun nanofiber membrane (ENM) (PCD) is generated, which can achieve spatial accuracy and temporal sustainability in drug release. It is further demonstrated that PCD possesses a significantly higher and more sustainable drug release profile than traditional drug-loading ENM. By providing a physical barrier and continuous releasing of dicumarol, PCD implantation significantly reduces tissue adhesion by 25%, decreases fibroblasts activity and inhibits key fibrogenic cytokine transforming growth factor beta (TGFβ) production by 30%, and improves the biomechanical tendon property by 14.69%. Mechanistically, PCD potently inhibits the connexin43 (Cx43) and thereby tunes down the fibroblastic TGFβ/Smad3 signaling pathway. Thus, this approach leverages the anti-adhesion effect of dicumarol and drug release properties of grafted copolymer ENM by esters to provide a promising therapeutic strategy for patients who suffer from PA.

An electrospun scaffold functionalized with a ROS-scavenging hydrogel stimulates ocular wound healing.

Ocular alkali burn is a serious ophthalmic emergency. Highly penetrative alkalis cause strong inflammatory responses leading to persistent epithelial defects, acute corneal perforation and severe scarring, and thereby persistent pain, loss of vision and cicatricial sequelae. Early and effective anti-inflammation management is vital in reducing the severity of injury. In this study, a double network biomaterial was prepared by compounding electrospinning nanofibres of thioketal-containing polyurethane (PUTK) with a reactive oxygen species (ROS)-scavenging hydrogel (RH) fabricated by crosslinking poly(poly(ethylene glycol) methyl ether methacrylate-co-glycidyl methacrylate) with thioketal diamine and 3,3'-dithiobis(propionohydrazide). The developed PUTK/RH patch exhibited good transparency, high tensile strength and increased hydrophilicity. Most importantly, it demonstrated strong antioxidant activity against H2O2 and 2,2-di(4-tert-octylphenyl)-1-picryl-hydrazyl (DPPH). Next, a rat corneal alkali burn model was established, and the PUTK/RH patch was transplanted on the injured cornea. Reduced inflammatory cell infiltration was revealed by confocal microscopy, and lower expression levels of genes relative to inflammation, vascularization and scarring were identified by qRT-PCR and western blot. Fluorescein sodium dyeing, hematoxylin and eosin (H&E) staining and immunohistochemicalstaining confirmed that the PUTK/RH patch could accelerate corneal wound healing by inhibiting inflammation, promoting epithelial regeneration and decreasing scar formation. STATEMENT OF SIGNIFICANCE: Ocular alkali burn is a serious ophthalmic emergency, characterized with persistent inflammation and irreversible vision loss. Oxidative stress is the main pathological process at the acute inflammatory stage, during which combined use of glucocorticoids and amniotic membrane transplantation is the most widely accepted treatment. In this study, we fabricated a polyurethane electrospun nanofiber membrane functionalized with a ROS-scavenging hydrogel. This composite patch could be a promising amniotic membrane substitute, possessing with a transparent appearance, elasticity and anti-inflammation effect. It could be easily transplanted onto the alkali-burned corneas, resulting in a significant inhibition of stromal inflammation and accelerating the recovery of corneal transparency. The conception of ROS-scavenging wound patch may offer a new way for ocular alkali burn.

Immobilization of Actinobacillus succinogenes on nano- and micro-fiber membranes for efficient and robust production of succinic acid.

This work aimed to study the efficiency of nano- and micro- fiber membranes in immobilizing Actinobacillus succinogenes CCTCC M2012036 for succinic acid production. Among the four kinds of electrospun nanofiber membranes of cellulose acetate, chitosan, poly(vinyl alcohol) (PVA) and chitosan-PVA, the cellulose acetate nanofiber membrane-immobilized cells performed the best with a succinic acid concentration and yield to be 27.3 ± 3.5g/L and 70.9 ± 5.8%. The cell-immobilized viscose microfiber membrane presented good reuse stability, and 17 batches of fermentation without activity loss were realized with the highest succinic acid yield of 83.20%. A microfiber membrane bioreactor was further constructed with the cell-immobilized viscose microfiber membrane to perform fermentation on a larger scale, and the concentration, yield and productivity of succinic acid were 73.20g/L, 86.50% and 1.49g/(L⋅h) using a fed-batch strategy, which were 124.30%, 127.60% and 124.2% of those obtained in the traditional fermenter. This study provided an approach for improving the practicality of biological succinic acid production.

TARTESSUS: A Customized Electrospun Drug Delivery System Loaded with Irinotecan for Local and Sustained Chemotherapy Release in Pancreatic Cancer.

Post-surgical chemotherapy in pancreatic cancer has notorious side effects due to the high dose required. Multiple devices have been designed to tackle this aspect and achieve a delayed drug release. This study aimed to explore the controlled and sustained local delivery of a reduced drug dose from an irinotecan-loaded electrospun nanofiber membrane (named TARTESSUS) that can be placed on the patients' tissue after tumor resection surgery. The drug delivery system formulation was made of polycaprolactone (PCL). The mechanical properties and the release kinetics of the drug were adjusted by the electrospinning parameters and by the polymer ratio between 10 w.t.% and 14 w.t.% of PCL in formic acid:acetic acid:chloroform (47.5:47.5:5). The irinotecan release analysis was performed and three different release periods were obtained, depending on the concentration of the polymer in the dissolution. The TARTESSUS device was tested in 2D and 3D cell cultures and it demonstrated a decrease in cell viability in 2D culture between 72 h and day 7 from the start of treatment. In 3D culture, a decrease in viability was seen between 72 h, day 7 (p < 0.001), day 10 (p < 0.001), 14 (p < 0.001), and day 17 (p = 0.003) as well as a decrease in proliferation between 72 h and day 10 (p = 0.030) and a reduction in spheroid size during days 10 (p = 0.001), 14 (p < 0.001), and 17 (p < 0.001). In conclusion, TARTESSUS showed a successful encapsulation of a chemotherapeutic drug and a sustained and delayed release with an adjustable releasing period to optimize the therapeutic effect in pancreatic cancer treatment.

Research Progress of Water Treatment Technology Based on Nanofiber Membranes.

In the field of water purification, membrane separation technology plays a significant role. Electrospinning has emerged as a primary method to produce nanofiber membranes due to its straightforward, low cost, functional diversity, and process controllability. It is possible to flexibly control the structural characteristics of electrospun nanofiber membranes as well as carry out various membrane material combinations to make full use of their various properties, including high porosity, high selectivity, and microporous permeability to obtain high-performance water treatment membranes. These water separation membranes can satisfy the fast and efficient purification requirements in different water purification applications due to their high filtration efficiency. The current research on water treatment membranes is still focused on creating high-permeability membranes with outstanding selectivity, remarkable antifouling performance, superior physical and chemical performance, and long-term stability. This paper reviewed the preparation methods and properties of electrospun nanofiber membranes for water treatment in various fields, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis, forward osmosis, and other special applications. Lastly, various antifouling technologies and research progress of water treatment membranes were discussed, and the future development direction of electrospun nanofiber membranes for water treatment was also presented.

Chitosan-Graphene Oxide Dip-Coated Polyacrylonitrile-Ethylenediamine Electrospun Nanofiber Membrane for Removal of the Dye Stuffs Methylene Blue and Congo Red.

Textile wastewater accommodates many toxic organic contaminants that could potentially threaten the ecosystem if left untreated. Methylene blue is a toxic, non-biodegradable, cationic dye that is reportedly observed in significant amounts in the textile effluent stream as it is widely used to dye silk and cotton fabrics. Congo red is a carcinogenic anionic dye commonly used in the textile industry. This study reports an investigation of methylene blue and Congo red removal using a chitosan-graphene oxide dip-coated electrospun nanofiber membrane. The fabricated nanocomposite was characterized using Scanning Electron Microscopy (SEM), FT-IR Spectroscopy, Raman Spectroscopy, UV-vis Spectroscopy, Drop Shape Analyzer, and X-ray Diffraction. The isotherm modeling confirmed a maximum adsorptive capacity of 201 mg/g for methylene blue and 152 mg/g for Congo red, which were well fitted with a Langmuir isotherm model indicating homogenous monolayer adsorption.

Development of robust superhydrophobic PFA/TMI/PVDF membrane by electrospinning/electrospraying techniques for air gap membrane distillation

AbstractIn this present study, the fabrication of electrospun nanofiber membranes with various hydrophobic polymers containing varying ratios of TMI &amp; PFA (a, a‐dimethyl meta‐isopropenylbenzyl isocyanate‐perfluoroalkoxy alkane) and styrene or polyacrylonitrile (PAN) was conducted to enhance air gap membrane distillation (AGMD) performance. Electrospinning and electrospraying were combined to fabricate an electrospun nanofiber membrane. Different membrane properties such as contact angle, thickness, liquid entry pressure (LEP) and mechanical strength were examined for the evaluation of nanofiber membranes. The performance of fabricated electrospun membranes was examined in AGMD application for 2 h using 0.1 wt% NaCl solution. Then, the optimized membrane was further tested for 2 h using synthetic and real geothermal water. Results demonstrated that a fabricated membrane with 20 wt% TMI &amp; PFA and 80 wt% styrene increased the contact angle to 154.8° and the LEP to 77.6 kPa. The salt rejection was 99.7% and permeate water boron concentration was 0.108 mg B/L for modified membrane (M1) compared with 98.01% and 0.305 mg B/L for pure PVDF membrane. These results indicate that this superhydrophobic membrane, fabricated by a combined electrospin/electrospray technique, shows high promise for MD applications.

Mechanically robust conjugated microporous polymer membranes prepared using polyvinylpyrrolidone (PVP) electrospun nanofibers as a template for efficient PM capture

Air pollution has become a challenging environmental problem worldwide due to rapid industrial development and excessive emissions of vehicle exhaust. Herein, we report a preparation of conjugated microporous polymer membranes (CMPM) with a hierarchical porous structure by electrospun polyvinylpyrrolidone (PVP) nanofibers as a template for effective removal of PM from airborne and vehicle exhaust. CMP membranes have hierarchical holes, where the macropores are from electrospun nanofiber membranes and the mesopores are from polymer synthesis. Taking advantage of its inherent physicochemical and thermal stability and hierarchical hole characteristics, the CMPM-based filter can work continuously for up to 36 h and still maintains a high removal efficiency (>99.56%), and also has a high filtration efficiency in the treatment of vehicle exhausts, with 95.18% for PM0.3, 98% for PM0.5 and >99% for PM2.5-10.0. The superior mechanical properties of CMPM allow the filter to be cleaned and reused. After three cycles, the filtration effectiveness of CMPM is still 94.83% for respirable particulate matter. Under high humidity (RH ≥ 95%) conditions, the CMPM-based filter showed higher than 95.37% filtration of PM0.3-10, and the oil adsorption rate could be maintained at 284% at high speed, proving the great potential of CMPM to clean air in complex situations.

Electrospun nanofiber composite membranes for geothermal brine treatment with lithium enrichment via membrane distillation

In this study, a composite electrospun nanofiber membrane was fabricated and used to treat a geothermal brine source with lithium enrichment. An in-situ growth technique was applied to incorporate silica nanoparticles on the surface of nanofibers with (3-Aminopropyl) triethoxysilane as the nucleation site. The fabricated composite nanofiber membrane was heat pressed to enhance the integration of the membrane and its mechanical stability. The fabricated membranes were tested to evaluate their performance in feedwater containing different concentrations of NaCl in the range of 0–100 g/L, and the wetting resistivity of the membranes was examined. Finally, the optimal membrane was applied to treat the simulated geothermal brine. The experimental results revealed that the in-situ growth of nanoparticles and coating of flourosilane agent dramatically improved the separation performance of the membrane with high salt rejection, and adequate flux was achieved. The heat-pressed membrane obtained >99% salt rejection and flux of 14–19 L/m2h at varying feedwater salinity (0–100 g/L), and the concentration of the Li during the 24 h test reached >1100 ppm from the initial 360 ppm. Evaluation of the energy efficiency of the membranes showed that the heat-pressed membrane obtained the optimum energy efficiency in the high concentration of salts. Additionally, the economic analysis indicated that MD could achieve a levelized cost of 2.9 USD/m3 of lithium brine concentration as the heat source is within the feed. Overall, this technology would represent a viable alternative to the solar pond to concentrate Li brine, enabling a compact, efficient, and continuous operating system.

Biodegradable Electrospun Nanofiber Membranes as Promising Candidates for the Development of Face Masks.

Aerosol particles, such as the widespread COVID-19 recently, have posed a great threat to humans. Combat experience has proven that masks can protect against viruses; however, the epidemic in recent years has caused serious environmental pollution from plastic medical supplies, especially masks. Degradable filters are promising candidates to alleviate this problem. Degradable nanofiber filters, which are developed by the electrospinning technique, can achieve superior filtration performance. This review focuses on the basic introduction to air filtration, the general aspects of face masks, and nanofibers. Furthermore, the progress of the state of art degradable electrospun nanofiber filters have been summarized, such as silk fibroin (SF), polylactic acid (PLA), chitosan, cellulose, and zein. Finally, the challenges and future development are highlighted.

Recovery of Extracellular Polymeric Substances from Excess Sludge Using High-Flux Electrospun Nanofiber Membranes.

The recycling of extracellular polymeric substances (EPSs) from excess sludge in wastewater treatment plants has received increasing attention in recent years. Although membrane separation has great potential for use in EPS concentration and recovery, conventional membranes tend to exhibit low water flux and high energy consumption. Herein, electrospun nanofiber membranes (ENMs) were fabricated using polyvinylidene fluoride (PVDF) and used for the recovery of EPSs extracted from the excess sludge using the cation exchange resin (CER) method. The fabricated ENM containing 14 wt.% PVDF showed excellent properties, with a high average water flux (376.8 L/(m2·h)) and an excellent EPS recovery rate (94.1%) in the dead-end filtration of a 1.0 g/L EPS solution at 20 kPa. The ENMs displayed excellent mechanical strength, antifouling properties, and high reusability after five recycles. The filtration pressure had a negligible effect on the average EPS recovery rate and water flux. The novel dead-end filtration with an EPS filter cake on the ENM surface was effective in removing heavy-metal ions, with the removal rates of Pb2+, Cu2+, and Cr6+ being 89.5%, 73.5%, and 74.6%, respectively. These results indicate the potential of nanofiber membranes for use in effective concentration and recycling of EPSs via membrane separation.

Preparation of fluffy bimodal conjugated electrospun poly(lactic acid) air filters with low pressure drop.

Electrospun nanofiber membranes have been extensively studied as air filters. However, their limited filtration efficiency for submicron inhalable particulate matter (PM), high resistance to filtration, and limited capacity to hold dust have hindered their widespread use. The majority of materials come from petroleum, and the use of organic solvents during the spinning process has a significant negative impact on the environment. In this work, a sustainable method has been proposed for producing filters using poly(lactic acid) (PLA) with a bimodal diameter distribution through conjugated electrospinning. This technique allows for the continuous production of interconnected micro/nano hybrid porous membranes, resulting in reduced resistance and improved dust holding capacity. The filtration efficiency, pressure drop, long-term filtration performance, and actual performance of the conjugated bimodal membrane (CBM) were extensively investigated. The results indicate that the filter has a high capacity for retaining particles, with filtration efficiencies of 99.94% for PM 0.3 and 99.96% for PM 2.5. It also demonstrates a high quality factor (0.078 Pa-1 for PM 0.3 and 0.084 Pa-1 for PM 2.5), long-term stability (a decrease of 2.35% for PM 0.3 and 0.05% for PM 2.5 over a period of 60 days) and outstanding dust holding capacity (9.17 g m-2). The conjugated bimodal membrane (CBM) shows a 22.64% decrease in resistance compared to the non-conjugated bimodal membrane (BM). In general, the approach outlined in this work provides valuable insights into the development of high-performance biodegradable air filters. These filters have improved filtration efficiency and reduced resistance.