Electrophilic Oxidation Research Articles

Proton vs Electron: The Dual Role of Redox-Inactive Metal Ions in Permanganate Oxidation Kinetics.

Redox-inactive metal-ion-driven modulation of the oxidation behavior of high-valent metal-oxo complex has garnered significant interest in biological and chemical synthesis; however, their role in permanganate (Mn(VII)) oxidation for the removal of organic pollutants has been largely neglected. Here, we uncover the impact of six metal ions (i.e., Ca2+, Mg2+, Ni2+, Zn2+, Al3+, and Sc3+) presenting in water environments on Mn(VII) activity. These ions uniformly boost the electron and oxygen transfer capabilities of Mn(VII) while impeding proton transfer, as evidenced by electrochemical tests, thioanisole probe analysis, and the kinetic isotope effect. The observed effects are intricately linked to the Lewis acidity of the metal ions. Further mechanistic insights reveal that Mn(VII) can interact with metal ions without direct reduction. Such interactions modify the electronic configuration of Mn(VII) and create an acidic microenvironment, thus increasing its electrophilicity and the energy barrier for the abstraction of proton from organic substrates. More importantly, the efficacy of Mn(VII) in removing phenolic pollutants is regulated by these ions through changing the driving force for proton and electron transfer, i.e., facilitated at pH > 4.5 and inhibited at lower pH. The contribution of active Mn intermediates is also discussed to reveal the oxidative mechanism of the metal ion/Mn(VII) system. These findings not only facilitate the rational design of Mn(VII) oxidation conditions in the presence of metal ions for water decontamination but also offer an alternative paradigm for enhancing electrophilic oxidation.

Bifunctional 0D carbon quantum dot cathode electrocatalyst coupled with atomic hydrogen and hydroxyl radicals for efficient removal of oxytetracycline hydrochloride

Efficient removal of antibiotics is difficult to achieve by conventional single-oxidation or reduction processes. Herein, a bifunctional cathodic electrocatalyst coupling atomic hydrogen (H*) reduction with hydroxyl radical (·OH) oxidation in an efficient electrocatalytic process was developed for the effective degradation of oxytetracycline hydrochloride (OTC). Pd particles were dispersed on B-doped carbon quantum dots to prepare a Pd-B-doped carbon quantum dots/titanium (Pd-BCQD/Ti) electrode as a bifunctional cathode catalyst. The electrode can simultaneously generate H* through the H2O/H+ reduction process, H2O2 through the oxygen reduction process, and then generate ·OH. H* performs nucleophilic hydrogenation reduction of OTC molecules, and ·OH performs electrophilic oxidation of the carbon skeleton, and both act synergistically with the active chlorine species (HClO) generated at the anode. The experimental results showed that the electrode achieved 90.50 % removal of OTC within 60 min. In addition, the Pd-BCQD/Ti electrode reduces energy consumption while increasing current efficiency. The degradation effect was more than 85.80 % in the pH range of 3∼9, indicating fairly stable catalytic activity over a wide pH range. The degradation efficiency was basically unchanged after ten cycles, and the reactivity was still high in the actual water. Intermediates were analyzed based on LC-MS to explore the degradation pathways of OTC. The toxicity of the intermediates generated during OTC degradation was predicted based on quantitative conformational relationships. This study provides a feasible strategy for the preparation of bifunctional catalysts based on zero-dimensional BCQD for efficient green antibiotic wastewater treatment.

Efficient electrochemical degradation of ranitidine by a novel Bi-coated titanium oxide electrode: Performance and mechanism

Ranitidine (RAN) is a commonly prescribed medication that poses ecological risks due to its potential to transform into the carcinogenic byproduct N-nitrosodimethylamine (NDMA) in the environment. Herein, we synthesized a novel bismuth-coated titanium oxide (Bi-Ti4O7) electrode using a straightforward coating method and evaluated its effectiveness in the electrochemical oxidation of RAN. The Bi-Ti4O7 electrode achieved a degradation efficiency of 90.41 % for an initial RAN concentration of 10 mg/L within 120 min, greatly outperforming the pristine Ti4O7 electrode. The incorporation of Bi enhances the oxygen vacancies and charge transfer characteristics, facilitating direct electron transfer between RAN and the Bi-Ti4O7 electrode. The potential degradation pathways of RAN by the Bi-Ti4O7 electrode included C–S bond cleavage, C–N bond cleavage, and electrophilic oxidation. No NDMA was generated during the oxidation process, and the toxicity of RAN oxidation intermediates was greatly reduced. The Bi-Ti4O7 electrode demonstrated excellent stability, maintaining over 90 % degradation efficiency across 30 cycles, and showed wide applicability across different pH levels and wastewater types with negligible Bi ion release (0.148 µg/L). These results underscore the potential of Bi-Ti4O7 as an effective and sustainable solution for RAN-polluted wastewater treatment.

Synergy of atomic hydrogen reduction and reactive oxygen species oxidation over confined Mn bifunctional site for electrocatalytic deep mineralization

Traditional reduction or oxidation processes generating one−component free radicals face challenges in deep dechlorination and mineralization of chlorophenols from wastewater. Herein, an efficient electrocatalytic process has been developed, which couples atomic H* reduction with reactive oxidation species (•OH and 1O2) oxidation on a bifunctional cathode for 4 −chlorophenol (4 −CP) removal. The N − doped carbon nanotubes encapsulated manganese nanoparticles was fabricated as cathode, which could generate atomic H* , initiating nucleophilic hydrodechlorination in presence of confined MnO sites. Subsequently, electrophilic oxidation by generating mainly 1O2 on confined Mn7C3 sites and •OH on confined MnO sites, facilitating the oxidative processes. Experimental results and theory calculations demonstrated that reductive dechlorination and oxidative mineralization processes could mutually promote each other, resulting in an enhancement factor of 2.90. At pH 7, this process achieved 100 % removal for 4 −CP, 84 % dechlorination, 76 % total organic carbon (TOC) removal and low energy consumption (0.76 kWh g−1TOC) within 120 min. Notably, TOC for chlorophenols containing Cl substituents at different positions and real lake water containing 4 −CP could be almost completely removed. This research establishes confined non−noble bifunctional active sites that synergistically enhance reductive dechlorination and oxidative degradation processes, holding significant treatment potential for application in deep mineralization of organochlorine from water/wastewater.

Amino- and Alkoxybenziodoxoles: Facile Preparation and Use as Arynophiles.

We report here on the facile synthesis of amino- and alkoxy-λ3-iodanes supported by a benziodoxole (BX) template and their use as arynophiles. The amino- and alkoxy-BX derivatives can be readily synthesized by reacting the respective amines or alcohols with chlorobenziodoxole in the presence of a suitable base. Unlike previously known nitrogen- and oxygen-bound iodane compounds, which have primarily been employed as electrophilic group transfer agents or oxidants, the present amino- and alkoxy-BX reagents manifest themselves as nucleophilic amino and alkoxy transfer agents toward arynes. This reactivity leads to the aryne insertion into the N-I(III) or O-I(III) bond to afford ortho-amino- and ortho-alkoxy-arylbenziodoxoles, iodane compounds nontrivial to procure by existing methods. The BX group in these insertion products exhibits excellent leaving group ability, enabling diverse downstream transformations.

Cooperative Cu/azodiformate system-catalyzed allylic C–H amination of unactivated internal alkenes directed by aminoquinoline

Aliphatic allylic amines are common in natural products and pharmaceuticals. The oxidative intermolecular amination of C(sp3)-H bonds represents one of the most straightforward strategies to construct these motifs. However, the utilization of widely internal alkenes with amines in this transformation remains a synthetic challenge due to the inefficient coordination of metals to internal alkenes and excessive coordination with aliphatic and aromatic amines, resulting in decreasing the reactivity of the catalyst. Here, we present a regioselective Cu-catalyzed oxidative allylic C(sp3)-H amination of internal olefins with azodiformates to these problems. A removable bidentate directing group is used to control the regiochemistry and stabilize the π-allyl-metal intermediate. Noteworthy is the dual role of azodiformates as both a nitrogen source and an electrophilic oxidant for the allylic C-H activation. This protocol features simple conditions, remarkable scope and functional group tolerance as evidenced by >40 examples and exhibits high regioselectivity and excellent E/Z selectivity.

Fluorescent probe to quantify lipid-derived electrophiles in edible oils.

In the presence of molecular oxygen, edible oils can be oxidized to form a multitude of α,β-unsaturated carbonyl products collectively called 'lipid-derived electrophiles'. These molecules affect the taste of fat-containing foods but also act as electrophiles by covalently binding to protein amines/thiols and DNA nucleotides. The chemical modification of proteins by lipid-derived electrophiles appears to play an important role in human health, but the quantification of this diverse class of compounds remains a challenge. In this study, we describe a method capable of measuring the relative content of α,β-unsaturated carbonyls in food containing edible oils by using a "turn-on" fluorescent probe. The detection of electrophiles is based on a pre-fluorescent probe, 7-mercapto-4-methyl-coumarin (C-SH). The fluorescence of C-SH increases after nucleophilic addition to electrophilic lipid oxidation products. Since different lipid-derived electrophiles will react at a different rate with our fluorescent probe, we expressed the probe's response against a standard electrophile: trans-2-nonenal. In this assay, electrophiles which react more quickly will have a more dominant weight in the measurements carried out. Using this analytical technique, we can compare electrophilic content in French fries from several restaurants, and find they have lower amounts of lipid-derived electrophiles versus frozen fries baked at home. We also demonstrate that potato chips sealed in a reduced oxygen atmosphere will have a low 'electrophilic content' that increases over time, whereas chips in oxygen-permeable packaging initially have a higher 'electrophilic content' that does not increase as much over time. The relative ease of fluorescence measurements using microplate readers coupled with a simple oil extraction protocol should allow this method to quantify 'electrophilic content' in several food sources.

Highly Selective Thioether Oxidation with H2O2 Catalyzed by Zr‐Substituted Keggin Phosphotungstate: Mechanistic Insights

AbstractThe Zr‐monosubstituted phosphotungstate (Bu4N)8[{PW11O39Zr(μ‐OH)(H2O)}2] (1) is a highly active and selective catalyst for thioether sulfoxidation with aqueous H2O2 in acetonitrile or acetonitrile/ethanol. The reaction proceeds unprecedentedly fast and completes within seconds at room temperature. Various sulfides produce corresponding sulfoxides with selectivity of 98–99 % and oxidant utilization efficiency of 92–99 %. The reaction mechanism was investigated using test substrates, kinetic, isotopic labeling, and spectroscopic tools. The oxidation of thianthrene‐5‐oxide and competitive sulfide‐sulfoxide oxidation point to an electrophilic oxidation mechanism, but a V‐shaped Hammett plot found for oxidation of p‐substituted thioanisoles may suggest a biphilic nature of active species. Kinetic studies revealed that the rate‐limiting step of the reaction is the interaction of a peroxo zirconium intermediate with organic substrates. ATR‐FT‐IR and 31P NMR spectroscopic studies coupled with stoichiometric experiments indicated that peroxo species capable of transferring an oxygen atom to thioethers are dimeric side‐on mono‐ and diperoxo complexes, [Zr2(μ‐η2 : η2‐O2){PW11O39}2(H2O)x]]8− (I) and [{Zr(μ‐η2‐O2)}2(PW11O39)2(H2O)y]10− (II), and monomeric Zr‐hydroperoxo [Zr(η2‐OOH)PW11O39]4− (III) and peroxo [Zr(η2‐O2)PW11O39]5− (IV) species, which dominate at high excess of H2O2. While I and III are endowed with electrophilic oxygen, which can be transferred to electron‐rich sulfides, more negatively charged II and IV preferably react with thioethers comprising electron‐withdrawing substituents.

Intervention timing of H* and •OH determines the catalytical degradation of tribromophenol by palladium(II) doped green rust in redox-alternating environments

Atomic hydrogen (H*) and hydroxyl radicals (•OH) can synergistically realize efficient mineralization of halogenated organic pollutants, but it requires an electrocatalytic or photoelectrocatalytic system. In this work, we developed a simple synergetic reduction-oxidation system for the degradation of tribromophenol (TBP) using Pd(II) doped green rust (GR). GR reduced Pd(II) to Pd(0) which catalyzed H2O/H+ to produce H* . H* completely reduced TBP to phenol. Meanwhile, excess H* involved in the generation of •OH under oxic conditions. The synergistic involvement of H* and •OH realized the mineralization of TBP, which could not be achieved by H* or •OH alone. Furthermore, the diffusion rate of dioxygen into solution determined sequential or synchronous involvement of H* and •OH, which significantly affected the mineralization efficiency of TBP. We proposed that the most efficient way to mineralize TBP was initiating H*-involved nucleophilic hydrodebromination first and then initiating •OH-involved electrophilic oxidation.

New Insights into Selective Singlet Oxygen Production via the Typical Electroactivation of Oxygen for Water Decontamination.

Selective production of singlet oxygen (1O2) as an electrophilic oxidant is crucial for the precise control of chemical targets in environmental fields. Herein, we proposed a strategy to construct a redox interface on electrodes, which can in situ produce inorganic metal hydroperoxides with appropriate oxidative ability during oxygen activation. Benefiting from atomic Cu sites (CuN4) in a copper-carbon aerogel electrode, almost complete production of 1O2 was achieved, thereby refraining the competitive formation of other reactive oxygen species. The fast electron transfer rate between CuN4 and electrogenerated H2O2 promoted the in situ formation of copper hydroperoxide (N4-Cu-OOH), thereby selectively and efficiently oxidizing intermediate O2•- to 1O2. The optimized production of 1O2 was up to 2583 μmol L-1 without additional chemical reagents. We further considered the high production of 1O2 for efficiently removing electron-rich organic pollutants from a complex water matrix. Fast kinetics was achieved and considered for removing various pollutants with electron-donating substituents in a nonradical oxidation pathway. The BPA degradation efficiency is less susceptible to the coexisting natural organic matter (NOM) and inorganic ions. Specifically, the kinetic constant for BPA removal is 34 times higher than that for a nanoparticle of a copper-carbon electrode while producing a hydroxyl radical. Our findings highlight the innovative interfacial surface engineering of an electrocatalytic O2 activation system to selectively generate 1O2 for future potential applications.

Mechanistic insight into the role of typical microplastics in chlorination disinfection: Precursors and adsorbents of both MP-DOM and DBPs

Microplastics (MPs) in drinking water are predominantly < 10 µm. The leaching of MPs derived dissolved organic matters (MP-DOM) from 5 µm polypropylene MPs (PP-MPs) and polystyrene MPs (PS-MPs) and the formation of MP-DOM derived disinfection byproducts during chlorination disinfection were first investigated. Comparably, PS-MPs are more vulnerable to chlorination and the primary attacks are on para C in aromatic side-chains via electrophilic Cl-substitution and oxidation by two-electron transfer. The O/C and Cl/C ratio of polystyrene MPs was linear and exponential versus initial available Cl2 concentrations, respectively. The significant PS-DOM leaching was observed with initial available Cl2 of 4.0 mg/L (USEPA recommended upper dose). As the initial available Cl2 concentration increased to 8.0 mg/L, the adsorption of chloro-phenolic-components of 200 Daltons in PS-DOM by 5 µm PS-MPs was observed for the first time. Trichloromethane (TCM) was identified as the dominant disinfection byproduct with a formation potential of 60.3 ± 7.8 and 73.7 ± 9.8 μg/mg for PS-DOM and PP-DOM, respectively. The derived TCM could adsorb onto PS-MPs followed the pseudo-second-order kinetic and Langmuir isotherm models. Extreme chlorination could reduce the maximal adsorption capacity of TCM on 5 µm PS-MPs from 196.68 ± 48.66 to 146.02 ± 32.98 μg/g. Thus, PS-MPs act as precursors and carriers of TCM in chlorination.

In-depth insights into Fe(III)-doped g-C3N4 activated peracetic acid: Intrinsic reactive species, catalytic mechanism and environmental application

In this study, we demonstrate that Fe(III)-doped g-C3N4 can efficiently activate peracetic acid (PAA) to degrade electron-rich pollutants (e.g., sulfamethoxazole, SMX) over a wide pH range (3−7). Almost ∼100% high-valent iron-oxo species (Fe(V)) was generated and acted as the dominant reactive species responsible for the micropollutants oxidation based on the analysis result of quenching experiments, 18O isotope-labeling examination and methyl phenyl sulfoxide (PMSO) probe method. Electrochemical testing (e.g., amperometric i−t and linear sweep voltammetry (LSV)) and density functional theory (DFT) calculations illustrated that the main active site Fe atom and PAA underwent electron transfer to form Fe(V) for attacking SMX. Linear free energy relationship (LFER) between the pseudo-first-order rates of different substituted phenols (SPs) and the Hammett constant σ+ depicted the electrophilic oxidation properties. The selective oxidation of Fe(V) endows the established system remarkable anti-interference capacity against water matrices, while the Fe(V) lead to the formation of iodinated disinfection by-products (I-DBPs) in the presence of I−. Fe(III)-doped g-C3N4/PAA system showed excellent degradation efficiency of aquaculture antibiotics. This study enriches the knowledge and research of high-valent iron-oxo species and provides a novel perspective for the activation of PAA via heterogeneous iron-based catalysts and practical environmental applications.

Vimentin single cysteine residue acts as a tunable sensor for network organization and as a key for actin remodeling in response to oxidants and electrophiles

Cysteine residues can undergo multiple posttranslational modifications with diverse functional consequences, potentially behaving as tunable sensors. The intermediate filament protein vimentin has important implications in pathophysiology, including cancer progression, infection, and fibrosis, and maintains a close interplay with other cytoskeletal structures, such as actin filaments and microtubules. We previously showed that the single vimentin cysteine, C328, is a key target for oxidants and electrophiles. Here, we demonstrate that structurally diverse cysteine-reactive agents, including electrophilic mediators, oxidants and drug-related compounds, disrupt the vimentin network eliciting morphologically distinct reorganizations. As most of these agents display broad reactivity, we pinpointed the importance of C328 by confirming that local perturbations introduced through mutagenesis provoke structure-dependent vimentin rearrangements. Thus, GFP-vimentin wild type (wt) forms squiggles and short filaments in vimentin-deficient cells, the C328F, C328W, and C328H mutants generate diverse filamentous assemblies, and the C328A and C328D constructs fail to elongate yielding dots. Remarkably, vimentin C328H structures resemble the wt, but are strongly resistant to electrophile-elicited disruption. Therefore, the C328H mutant allows elucidating whether cysteine-dependent vimentin reorganization influences other cellular responses to reactive agents. Electrophiles such as 1,4-dinitro-1H-imidazole and 4-hydroxynonenal induce robust actin stress fibers in cells expressing vimentin wt. Strikingly, under these conditions, vimentin C328H expression blunts electrophile-elicited stress fiber formation, apparently acting upstream of RhoA. Analysis of additional vimentin C328 mutants shows that electrophile-sensitive and assembly-defective vimentin variants permit induction of stress fibers by reactive species, whereas electrophile-resistant filamentous vimentin structures prevent it. Together, our results suggest that vimentin acts as a break for actin stress fibers formation, which would be released by C328-aided disruption, thus allowing full actin remodeling in response to oxidants and electrophiles. These observations postulate C328 as a “sensor” transducing structurally diverse modifications into fine-tuned vimentin network rearrangements, and a gatekeeper for certain electrophiles in the interplay with actin.

A New Thiolate-Bound Dimanganese Cluster as a Structural and Functional Model for Class Ib Ribonucleotide Reductases.

In class Ib ribonucleotide reductases (RNRs) a dimanganese(II) cluster activates superoxide (O2 ⋅- ) rather than dioxygen (O2 ), to access a high valent MnIII -O2 -MnIV species, responsible for the oxidation of tyrosine to tyrosyl radical. In a biomimetic approach, we report the synthesis of a thiolate-bound dimanganese complex [MnII 2 (BPMT)(OAc)2 ](ClO)4 (BPMT=(2,6-bis{[bis(2-pyridylmethyl)amino]methyl}-4-methylthiophenolate) (1) and its reaction with O2 ⋅- to form a [(BPMT)MnO2 Mn]2+ complex 2. Resonance Raman investigation revealed the presence of an O-O bond in 2, while EPR analysis displayed a 16-line St =1/2 signal at g=2 typically associated with a MnIII MnIV core, as detected in class Ib RNRs. Unlike all other previously reported Mn-O2 -Mn complexes, generated by O2 ⋅- activation at Mn2 centers, 2 proved to be a capable electrophilic oxidant in aldehyde deformylation and phenol oxidation reactions, rendering it one of the best structural and functional models for class Ib RNRs.

Generation of Ru(III)-hypochlorite with resemblance to the heme-dependent haloperoxidase enzyme.

The reaction of [(Me/BnTPEN)RuII(NCCH3)]2+ (BnTPEN = N1-benzyl-N1,N2,N2-tris(pyridine-2-ylmethyl)ethane-1,2-diamine and MeTPEN = N1-methyl-N1,N2,N2-tris(pyridine-2-ylmethyl)ethane-1,2-diamine) with mCPBA in the presence of chloride ions in CH3CN : H2O generated a novel (Me/BnTPEN)RuIII-OCl species at room temperature. This hypochlorite adduct could also be obtained by the direct reaction of NaOCl and HClO4 with (L)RuII complexes. The current study mimics the synthesis of a metal hypochlorite adduct in a similar fashion as in the heme-dependent haloperoxidase enzyme. As an electrophilic oxidant, the ruthenium hypochlorite adduct catalyzes hydrogen atom abstraction reactions of phenols and their derivatives.

Formation of iodinated aromatic DBPs at different molar ratios of chlorine and nitrogen in iodide-containing water

Variations in iodinated aromatic disinfection byproducts (DBPs) in the presence of I− and organic compounds as a function of reaction time in different molar ratios (MRs) of HOCl:NH3-N were investigated. Up to 17 kinds of iodinated aromatic DBPs were identified in the breakpoint chlorination of iodide (I−)/organic (phenol, bisphenol S (BPS) and p-nitrophenol (p-NP)) systems, and the possible pathways for the formation of iodinated aromatic DBPs were proposed. The reaction pathways include HOCl/HOI electrophilic substitution and oxidation, while the dominant iodinated DBPs were quantified. In the I−/phenol system (pH = 7.0), the sum of the concentrations of four iodinated aliphatic DBPs ranged from 0.32 to 1.04 μM (triiodomethane (TIM), dichloroiodomethane (DCIM), diiodochloromethane (DICM) and monoiodoacetic acid (MIAA)), while the concentration of 4-iodophenol ranged from 2.99 to 12.87 μM. The concentration of iodinated aromatic DBPs remained stable with an MR = 1:1. When the MR was 6:1, iodinated aromatic DBPs decreased with increasing reaction time, in which the main disinfectant in the system was active chlorine. This study proposed the formation mechanism of iodinated aromatic DBPs during the breakpoint chlorination of iodide-containing water. These results can be used to control the formation of hazardous iodinated aromatic DBPs in the disinfection of iodine containing water.

Wet-chemical synthesis of solution-processible porous graphene via defect-driven etching

Etching pores in the basal plane of graphene by wet-chemical methods with a certain size-control reflects a synthetic challenge. Here, a facile and controllable method is presented to produce solution-processible porous-graphene derivatives. The derivative of graphene oxide, here oxo-functionalized graphene (oxo-G) with a controlled density of in-plane vacancy defects is chosen as a precursor. Hydroxyl radicals are generated, which etch pores into the basal plane of oxo-G, preferably starting at defect sites. Thereby, solution-processible flakes of oxo-G with μm-size lateral dimensions and pores with tunable diameters between 5 nm and 500 nm are accessible. Moreover, a plausible mechanism for the growth of pores is proposed based on AFM, TEM, UV–vis spectroscopy, FTIR spectroscopy, XPS, solid-state NMR spectroscopy and statistical Raman spectroscopy. In first approximation, the electrophilic addition and oxidation reaction between hydroxyl radicals and oxo-G close to defect-sites is the basis for etching. The porous graphene materials may act as membranes or tunable two-dimensional materials.

Determination of paracetamol and its metabolites via LC-MS/MS in dried blood volumetric absorptive microsamples: A tool for pharmacokinetic studies

Paracetamol (acetaminophen, APAP) is the most frequently used analgesic and antipyretic worldwide. Nonetheless, APAP induced hepatotoxicity is the most common cause of acute liver failure in the western world. This hepatotoxicity is related to the metabolism of APAP, via the formation of the electrophilic oxidation product N-acetyl-para-benzoquinone imine. To investigate differences in APAP metabolism in specific patient populations and to optimize dosing regimens, quantification of metabolites from the different metabolic pathways is needed to perform pharmacokinetic (PK) studies. For this purpose, sensitive and short liquid chromatography-tandem mass spectrometry methods were developed for the quantitation of APAP and four of its metabolites (APAP-glucuronide, APAP-sulfate, APAP-mercapturate, and APAP-cysteine) in plasma, whole blood and dried blood microsamples collected via 10 µL volumetric absorptive microsampling (VAMS) devices. The methods were successfully validated based on internationally accepted guidelines (EMA, FDA), encompassing selectivity, evaluation of the calibration model, matrix effect and recovery, accuracy and precision, stability, and dilution integrity. In addition, for the VAMS samples, the effect of the hematocrit on the recovery was evaluated. Successful application on whole blood and plasma, as well as on VAMS samples prepared from venous or capillary blood of patients, demonstrated that the methods were fit-for-purpose and can be used for future PK studies.

Total Synthesis of Stemarene and Betaerene Diterpenoids: Divergent Ring-Formation Strategy and Late-Stage C–H Functionalization

A unified protecting group-free approach to two stemarene and two betaerene diterpenoids through a bioinspired two-phase strategy has been developed, and three of them were obtained for the first t...

Zefirov's reagent and related hypervalent iodine triflates

This minireview describes chemistry of hypervalent organoiodine triflates, which have received wide synthetic application as powerful electrophilic reagents and oxidants. The first representative of these compounds, μ-oxo-bis[(trifluoromethanesulfonato)(phenyl)iodine], was originally prepared and investigated in N. S. Zefirov's laboratory at Moscow State University in the early 1980s. This compound, now commonly known as Zefirov's reagent, is a useful reagent for the synthesis of various iodonium salts from the corresponding organic precursors. Recently, thermally stable and highly reactive triflates derived from cyclic hypervalent iodine compounds, benziodoxoles, have been reported and utilized in organic synthesis. The strongest iodine(V) oxidant, IBX-ditriflate, has been prepared from 2-iodoxybenzoic acid (IBX) and triflic acid. IBX-ditriflate can readily oxidize organic substrates that are generally resistant to oxidation.