Electrophilic Aromatic Substitution Research Articles

An Exceptional Valorization of CuO Nanoparticles in Ionic Liquids as an Efficient Medium for the Electrophilic Substitution of Indole Towards the Formation of Bis(indolyl)methanes

Aim: Ionic liquids are promising green solvents with simple but unique structure-related physical properties such as negligible vapour pressure, exceptional thermal conductivity, remarkable thermal stability and their suitability and inertness towards a broad range of catalytic applications. CuO NPs have been addressed as a cost-effective and a reagent of a choice that necessitates only mild reaction conditions to offer a high yield of the desired products with exceptional selectivity in a short duration of time. Therefore, in the present work, attempts have been made to explore the catalytic potentials of CuO NPs in an ionic liquid medium to synthesize biologically important bis(indolyl)methanes. Background: Catalytic explorations of metal oxide nanoparticles in ionic liquids offers a cooperative effect that has a significant impact on the kinetics as well as on the outcome of the reaction. Therefore, such catalytic systems in the present times have seized the scientific community's interest from the perspectives of sustainable development in synthetic organic chemistry. The combination of metal oxide nanoparticles with highly tunable ionic liquids is not only used to synthesize simple organic molecules but also explored in the synthesis of complex organic molecules of high commercial and biological relevance. Objectives: The current work offers a rapid and robust protocol for synthesizing bis(indolyl)methanes via electrophilic substitution reaction between indole and various aldehydes in the presence of a CuO nanoparticles-ionic liquid system. The discussion focuses on the high tolerance of different functionalities by the catalytic system leading to the synthesis of bis(indolyl)methanes. Methods: CuO NPs have been synthesized via the co-precipitation method using ionic liquid. The applicability of metal oxide nanoparticles-IL matrix was further investigated in synthesizing bis(indolyl)methanes. Results: The FT-IR absorption below 600 cm-1 and the XRD pattern showing all the peaks in the diffraction diagram revealed the formation of CuO NPs. FESEM images show the flake-shaped morphology of CuO NPs and are found to be separated from the agglomerated clusters Conclusion: Ionic liquid-CuO NPs matrix reveals good to exceptional catalytic properties, and their advancements as a catalytic system at room temperature open new avenues for synthetic organic chemists.

Two-Step Synthesis of 4-Hydroxy-3,5-dimethylphenyl Benzoate: Undergraduate Organic Laboratory of Electrophilic Aromatic Substitution and Nucleophilic Aromatic Substitution

Two-Step Synthesis of 4-Hydroxy-3,5-dimethylphenyl Benzoate: Undergraduate Organic Laboratory of Electrophilic Aromatic Substitution and Nucleophilic Aromatic Substitution

Pd‐Catalyzed [3+6+3+6] Macrocyclizations of Aryl α‐Diazo‐β‐Ketoesters

Thanks to Pd(II)‐catalysis, an efficient synthesis of unsaturated macrocycles is achieved by [3+6+3+6] condensation of cyclic ethers with aryl α‐diazo‐β‐ketoesters. The presence of the electron‐rich aryl ester moieties forbids the use of dirhodium complexes as these diazo decomposition catalysts provoke unforeseen intermolecular C<sub>sp2</sub>‐H insertion reactions that derail the targeted reactivity. However, with Pd(acac)<sub>2</sub>, using high concentration conditions (1 M), a variety of 18‐membered macrocycles (16 examples) is afforded with both aryl and alkyl diazo reagents. Catalyst selection for either electrophilic aromatic substitution (Rh) or ylide (Pd) pathways are explained by computational approaches

Electrochemical C-H Mono-/Multi-Bromination Regulation of N-Sulfonylanilines on a Cost-Effective Carbon Fiber Electrode and Its Prospective Electroactive Molecule Screening.

Electrochemical C-H mono/multi-bromination regulation of N-sulfonylanilines on the cost-effective CF electrode is described. This reaction proceeds smoothly under mild conditions with a broad substrate scope, affording diverse mono/multi-brominated anilines in moderate to good yields. Mechanism study reveals that this transformation involves anodic oxidation, aromatic electrophilic substitution, and deprotonation. Preliminary electroactive molecule screening results in its prospective application in electroactive MBs for electrochemical biosensors.

Browning reactions of hydroxycinnamic acids and heterocyclic Maillard reaction intermediates – Formation of phenol-containing colorants

Non-enzymatic conversion of phenolic compounds plays an important role during thermal processing of plant-based food such as coffee, cocoa, and peanuts. However, the more prominent Maillard reaction is mainly studied at a mechanistic level for carbohydrates and amino compounds to clarify reactions that contribute to (‘classic') melanoidin formation, but the role of phenolic compounds in such reactions is rarely discussed yet. To understand their contribution to non-enzymatic browning, reactions between ubiquitous phenolic acids, such as caffeic acid and ferulic acid, and prominent heterocyclic Maillard intermediates, namely furfural, hydroxymethylfurfural, and pyrrole-2-carbaldehyde were investigated. Following incubation under roasting conditions (220 °C, 0–30 min), heterogenous products were characterized by high-resolution mass spectrometry, and, after isolation, by nuclear magnetic resonance spectroscopy. By this, color precursors were identified, and it was shown that in addition to aromatic electrophilic substitution, nucleophilic and condensation reactions are key mechanisms contributing to the formation of phenol-containing melanoidins.

Preparation of novel zwitterionic polysulfone ultrafiltration membranes for the dual-enhanced antifouling and antibacterial properties by in-situ one pot crosslinking reaction

Zwitterionic polysulfone (PSf) ultrafiltration membranes were fabricated by non-solvent phase separation (NIPS) method. Herein, a casting solution at 45 °C was developed by using chloromethylated polysulfone (CMPSf), N, N-dimethylacetamide (DMAc) as a solvent, 4-amino-benzenesulfonic acid monosodium salt (ABS) as a cross-linking agent, and Na2CO3 as an acid binder. Simultaneously, the occurrence of the electrophilic substitution reaction between ABS and CMPSf caused the formation of ABS grafting CMPSf (CMPSf-g-ABS). After a specific reaction time, the casting solution was applied to cast membranes, which were subsequently submerged in coagulation bath. A zwitterionic ultrafiltration (ZUF) membrane was obtained using NIPS following the treatment of hydrochloric acid (HCl) solution (1 M mol). Because of the formation of cross-linked CMPSf-g-ABS, the results revealed that the casting solution's viscosity increased sharply from 425.4 mPa s at the initial stage (0 h) to 4810.8 mPa s (22 h). Interestingly, the morphology of the membranes with an asymmetric finger-like structure at 0 h gradually transformed to a gradient sponge-like structure after 22 h. Specifically, the ZUF membrane (M22-H) with the gel fraction of 72.1% procured after the reaction of 22 h demonstrated a low water contact angle (40.17°) and a high pure water permeance (420.4 L m−2 h−1 bar−1). The M22-H also exhibited a high flux recovery rate (FRR) (90.2%), bovine serum albumin (BSA) rejection (>95%), and Escherichia coli (E. coli) antibacterial rate (96.2%). The surface of the ZUF membrane with numerous zwitterionic groups enhances the hydration layer's energy (i region <16 nm) and creates a thick hydration layer (ii region >16 nm), causing a significant improvement in the antifouling performance. This research opens new avenues for preparing zwitterionic functional membranes.

B-COPNA resin formation from ethylene tar light fractions: Process development and mechanical exploration by molecular simulation

Efficient utilization strategy of ethylene tar (ET), the main by-product of ethylene cracking unit, is urgently required to meet demands for modern petrochemical industry. On the other hand, condensed polynuclear aromatic resin of moderate condensation degree (B-COPNA) is a widely used carbon material due to its superb processability, the production of which is however seriously limited by high cost of raw materials. Under such context, an interesting strategy was proposed in this study for producing B-COPNA resin using crosslinked light fractions of ethylene tar (ETLF, boiling point < 260 °C) facilitated by molecular simulation. 1,4-Benzenedimethanol (PXG) was first selected as the crosslinking agent according to the findings of molecular simulation. The effects of operating conditions, including reaction temperature, crosslinking agent and catalyst content, on the softening point and yield of B-COPNA resin products were then investigated to optimize the process. The reaction mechanism of resin production was studied by analyzing the molecular structure and transition state of ETLF and crosslinking agent. It was shown that PXG exhibited a superior capacity of withdrawing electrons and higher electrophilic reactivity than other crosslinking agents. In addition to the highest yield and greatest heat properties, PXG-prepared resin contained most condensed aromatics. The corresponding optimized conditions of resin preparation were 180 °C, 1:1.9 (PXG:ETLF) and 3% (mass) of catalyst content with a resin yield of 78.57%. It was the electrophilic substitution reaction occurred between the ETLF and crosslinking agent molecules that was responsible for the resin formation according to the experimental characterization and molecular simulation. Hence, it was confirmed that the proposed strategy and demonstrated process can achieve a clean and high value-added utilization of ETLF via B-COPNA resin preparation, bringing huge economic value to the current petrochemical industry.

Synthesis and Structure of Unsymmetrical Anthracenyl-Isoxazole Antitumor Agents Via the Diastereoselective Bromination of 3-(9′-Anthryl)-Isoxazole Esters

In pursuit of unsymmetrical precursors for the novel series of anthracenyl-isoxazole amide (AIM) antitumor agents, a series of substituted anthracenes were subjected to bromination and re-aromatization in our study, during which we solved four single crystal X-ray diffractometry (Sc-xrd) structures which we report herein. The C-9 nitrile oxide, after its reaction with bromine, was isolated, but when subjected to re-aromatization, it returned to the starting 10-bromo nitrile oxide 1, which did provide an accurate crystal structure, with R = 0.018. The 10-halogenated 3-(9’-anthryl)-isoxazole esters were subjected to bromination and re-aromatization. Surprisingly, the yields obtained in the presence of the isoxazole were reasonably good (62–68% isolated yields), and the major diastereomers allowed for the characterization using Sc-xrd. The penta bromo product 2 showed a trans, trans, cis relationship for the four bromines on the A-ring of the anthracene, and we observed that for the unit cell, the atropisomers displayed a 1:1 ratio at the chiral axis between the isoxazole and anthrancene rings. Similarly, the 10-chloro 3 indicated a ratio of 1:1 at the chiral axis in the crystal structure. A base-induced re-aromatization afforded 3,10-dihalogenated analogues selectively in very good yields (X = Cl, 89%; X = Br 92%), of which the dibromo 4 was characterized using Sc-xrd. The improved yields of the unique diastereomeric bromination products suggested the consideration of a novel electrophilic aromatic substitution mechanism driven by the stereo-electronic environment, imposed by the isoxazole ester substituent. The promise of the application of this chemistry in the future development of AIM antitumor agents is suggested.

Bromopyrene Symphony: Synthesis and Characterisation of Isomeric Derivatives at Non-K Region and Nodal Positions for Diverse Functionalisation Strategies.

Pyrene, a renowned aromatic hydrocarbon, continues to captivate researchers due to its versatile properties and potential applications across various scientific domains. Among its derivatives, bromopyrenes stand out for their significance in synthetic chemistry, materials science, and environmental studies. The strategic functionalisation of pyrene at non-K region and nodal positions is crucial for expanding its utility, allowing for diverse functionalisation strategies. Bromo-substituted precursors serve as vital intermediates in synthetic routes; however, the substitution pattern of bromoderivatives significantly impacts their subsequent functionalisation and properties, posing challenges in synthesis and purification. Understanding the distinct electronic structure of pyrene is pivotal, dictating the preferential electrophilic aromatic substitution reactions at specific positions. Despite the wealth of literature, contradictions and complexities persist in synthesising suitably substituted bromopyrenes due to the unpredictable nature of substitution reactions. Building upon historical precedents, this study provides a comprehensive overview of bromine introduction in pyrene derivatives, offering optimised synthesis conditions based on laboratory research. Specifically, the synthesis of mono-, di-, tri-, and tetrabromopyrene isomers at non-K positions (1-, 3-, 6-, 8-) and nodal positions (2-, 7-) is systematically explored. By elucidating efficient synthetic methodologies and reaction conditions, this research contributes to advancing the synthesis and functionalisation strategies of pyrene derivatives, unlocking new possibilities for their utilisation in various fields.

A universal model to predict yields of THMs and HAAs based on UV–Visible absorption spectra

Differential absorption spectroscopy (DAS) quantifies changes in the UV–Visible absorbance of dissolved organic matter (DOM) caused by reactions of its chromophores. As a result of its precision and sensitvity, DAS serves as a powerful tool for characterizing the formation of disinfection by-products (DBPs) in generated in DOM chlorination reactions. However, the nonlinear relationship between the intensity of DAS and DBP concentrations as well as the need to develop site-specific fitting parameters limit its practical applications. This study investigated the physico-chemical nature of DAS of chlorinated DOM through experimental measurements and theoretical calculations. Results of this study provide molecular-level evidence that electrophilic substitution reactions involving DOM reactive sites result in the emergence of DAS feaures ascribed to the "fast" chromophores. The ring opening in the cyclic enones-like structures which can be present either in the original DOM or are generated as intermediates in its chlorination, leads to the emergence of DAS features associated with the "slow" chromophores and high yields of DBPs. The kinetic study of chlorination of real waters reveals a strong linear relationship (R2 > 0.91) between ln([DBP]) and the long-wavelength (λ > 325 nm) parameter of the DAS, notably (ln(-DA350)). This relationship varies among different water sources due to the differences in the heterogeneity of Band A3 whose maximum is near 350 nm. Band A3 is one of the Gaussian bands that comprise the overall UV–Visible spectrum of DOM. A new function (f(−DA350)) is proposed in this study to quantify DBP formation. This function, which is determined by the Band A3's area, allows establishing a universal linear relationship between f(−DA350) and ln([THMs]), as well as f(−DA350) and ln([HAAs]), across various water sources. The findings of this study will stimulate further development of spectroscopy-based DBP monitoring technology for monitoring and optimization of water disinfection processes.

Ferrate(VI) assists in reducing cytotoxicity and genotoxicity to mammalian cells and organic bromine formation in ozonated wastewater

Ozonation of wastewater containing bromide (Br−) forms highly toxic organic bromine. The effectiveness of ozonation in mitigating wastewater toxicity is minimal. Simultaneous application of ozone (O3) (5 mg/L) and ferrate(VI) (Fe(VI)) (10 mg-Fe/L) reduced cytotoxicity and genotoxicity towards mammalian cells by 39.8% and 71.1% (pH 7.0), respectively, when the wastewater has low levels of Br−. This enhanced reduction in toxicity can be attributed to increased production of reactive iron species Fe(IV)/Fe(V) and reactive oxygen species (•OH) that possess higher oxidizing ability. When wastewater contains 2 mg/L Br−, ozonation increased cytotoxicity and genotoxicity by 168%-180% and 150%-155%, respectively, primarily due to the formation of organic bromine. However, O3/Fe(VI) significantly (p < 0.05) suppressed both total organic bromine (TOBr), BrO3−, as well as their associated toxicity. Electron donating capacity (EDC) measurement and precursor inference using Orbitrap ultra-high resolution mass spectrometry found that Fe(IV)/Fe(V) and •OH enhanced EDC removal from precursors present in wastewater, inhibiting electrophilic substitution and electrophilic addition reactions that lead to organic bromine formation. Additionally, HOBr quenched by self-decomposition-produced H2O2 from Fe(VI) also inhibits TOBr formation along with its associated toxicity. The adsorption of Fe(III) flocs resulting from Fe(VI) decomposition contributes only minimally to reducing toxicity. Compared to ozonation alone, integration of Fe(VI) with O3 offers improved safety for treating wastewater with varying concentrations of Br−.

Oxygenation of Phenols with Water as the Oxygen Source and Oxoammonium Salt as the Oxidant.

Aromatic C-H oxygenation is important in both industrial production and organic synthesis. Here we report a metal-free approach for phenol oxygenation with water as the oxygen source using oxoammonium salts as the renewable oxidant. Employing this protocol, various alkyl-substituted phenols were converted into benzoquinones in yields of 59-98%. On the basis of 18O-labeling and kinetic studies, the hydroxy-oxoammonium adduct was proposed to attack the aromatic ring similarly to electrophilic aromatic substitution. We suppose that the findings described here not only provide an efficient and highly selective protocol for aromatic C-H oxygenation but also may encourage further developments of possible transition-metal-free catalytic methods.

Synthesis of 1,3,5-Triazepines and Benzo[f][1,3,5]triazepines and Their Biological Activity: Recent Advances and New Approaches.

This review article discusses the recent progress in synthesizing seven-membered ring 1,3,5-triazepine and benzo[f][1,3,5]triazepine derivatives. These derivatives can be either unsaturated, saturated, fused, or separated. This review covers strategies and procedures developed over the past two decades, including cyclo-condensation, cyclization, methylation, chlorination, alkylation, addition, cross-coupling, ring expansions, and ring-closing metathesis. This review discusses the synthesis of 1,3,5-triazepine derivatives using nucleophilic or electrophilic substitution reactions with various reagents such as o-phenylenediamine, 2-aminobenzamide, isothiocyanates, pyrazoles, thiazoles, oxadiazoles, oxadiazepines, and hydrazonoyl chloride. This article systematically presents new approaches and techniques for preparing these compounds. It also highlights the biological importance of benzo[f][1,3,5]triazepine derivatives, which have been used as drugs for treating nervous system diseases. This review aims to provide researchers with the necessary information to create and develop new derivatives of these compounds as quickly as possible.

Novel chemical tyrosine functionalization of adeno-associated virus improves gene transfer efficiency in liver and retina

Decades of biological and clinical research have led to important advances in recombinant adeno-associated viruses rAAV-based gene therapy gene therapy. However, several challenges must be overcome to fully exploit the potential of rAAV vectors. Innovative approaches to modify viral genome and capsid elements have been used to overcome issues such as unwanted immune responses and off-targeting. While often successful, genetic modification of capsids can drastically reduce vector yield and often fails to produce vectors with properties that translate across different animal species, such as rodents, non-human primates, and humans. Here, we describe a chemical bioconjugation strategy to modify tyrosine residues on AAV capsids using specific ligands, thereby circumventing the need to genetically engineer the capsid sequence. Aromatic electrophilic substitution of the phenol ring of tyrosine residues on AAV capsids improved the in vivo transduction efficiency of rAAV2 vectors in both liver and retinal targets. This tyrosine bioconjugation strategy represents an innovative technology for the engineering of rAAV vectors for human gene therapy.

Contribution of Hydroxycinnamic Acids to Color Formation in Nonenzymatic Browning Reactions with Key Maillard Reaction Intermediates.

The Maillard reaction is a vital part of food processing, involving a vast number of complex reaction pathways, resulting in high-molecular-weight colorants. So far, studies have been focused on the conversion of carbohydrates and amino compounds, but the literature elaborating the contribution of phenolic compounds to the formation of the colored end-products is still rare. The aim of this study was to characterize early reactions, underlying the formation of phenol-containing melanoidins. For this purpose, binary model systems of the prominent phenolic compounds caffeic acid and ferulic acid combined with α-dicarbonyl compounds typically formed in the Maillard reaction such as glyoxal, methylglyoxal, and diacetyl were analyzed after heat treatment. High-resolution mass spectrometry revealed that decarboxylation, aromatic electrophilic substitution, and nucleophilic addition are important reaction steps that lead to colored heterogeneous oligomers. Polymerization was favored for phenolic compounds with a high electron density in the aromatic system and for α-dicarbonyl compounds carrying aldehyde functions.

N-dealkylation of amines during water disinfection – Revealing a new direction in the formation of disinfection by-products

Among numerous disinfection by-products (DBP) forming during aqueous chlorination nitrogen containing species are of special concern due to their toxicological properties. Nevertheless, corresponding reaction products of these natural and anthropogenic compounds are not sufficiently studied so far. An interesting reaction involves dealkylation of the substituted amine moiety. Here we present the results of the comparative study of one-electron oxidation and aqueous chlorination of several aliphatic and aromatic amines. The reaction products were reliably identified with gas chromatography – high resolution mass spectrometry (GC-HRMS), high pressure liquid chromatography – electrospray ionization high resolution mass spectrometry HPLC-ESI/HRMS), and electrochemistry - electrospray ionization high resolution mass spectrometry (EC-ESI/HRMS). Certain similarities dealing with the formation of the corresponding aldehydes and substitution of alkyl groups at the nitrogen atom for hydrogen were shown for the studied processes. The mechanism of the substituted amines’ aqueous chlorination involving one-electron oxidation is proposed and confirmed by the array of the observed reaction products. Alternative reactions taking place in conditions of aqueous chlorination, i.e. aromatic electrophilic substitution, may successfully compete with dealkylation and produce major products.

Electrophilic aromatic substitution in eutectic-type mixtures: from an old concept to new sustainable horizons

This review provides a critical overview on the use of sustainable eutectic mixtures in SEAr transformations.

Facile Friedel-Crafts alkylation of arenes under solvent-free conditions.

The Friedel-Crafts alkylation of arenes is an important part of electrophilic aromatic substitution reactions. However, the reactivity of arenes is weakened by electron-withdrawing substituents, leading to limited substrate scopes and applications. Herein, we developed an efficient HOTf-promoted Friedel-Crafts alkylation reaction of broad arenes with α-aryl-α-diazoesters under metal-free and solvent-free conditions.

Iodine-mediated oxidative triple functionalization of indolines with azoles and diazonium salts.

We report an innovative synthetic strategy for the generation of polysubstituted indoles from indolines, aryldiazonium salts, and azoles. The methodology encompasses an electrophilic substitution reaction affording C5-indoline intermediates which undergo an iodine-mediated oxidative transformation coupled with C-H functionalization to yield the indole derivatives.

Semi-fluorinated (6F) polyaryl ethers and polyphenylenes via interfacial electrophilic condensation polymerization with hexafluoroacetone hydrate

A series of semi-fluorinated polymers were obtained by Friedel-Crafts polymerization of hexafluoroacetone trihydrate (HFAH) with a variety of activated and non-activated aromatic monomers. Interfacial (water/dichloroethane) electrophilic aromatic substitution (EAS) polymerizations were carried out with trifluoromethanesulfonic anhydride (Tf2O) and Aliquat® 336 as phase transfer catalyst. This versatile and straightforward method achieved the synthesis of moderate to high molecular weight (12.0–29.6 kDa) polyaryl ethers and polyphenylenes with 1,1,1,3,3,3-hexafluoroisopropylene (6F) main chain linkages. Predominantly amorphous film-forming materials were obtained with low branching, high solubilities in common organic solvents, thermo-oxidative stabilities up to 500 °C, and glass transitions (Tg) ranging from 157 to 250 °C. The optical and dielectric properties of these materials were also studied from which high visible region transmittance and low dielectric constant values comparable with commercial materials were found.