Electronic Transitions Research Articles

Dramatic enhancement in lithium-ion battery capacity through synergistic effects of electronic transitions in light-assisted organic coordination cathode material Co(bpy)(dhbq)2

Integration of photoactive and lithium storing units into a single cathode endows it with notable capacity in the presence of suitable light. However, the interfacial effect between the two materials causes significant loss of photogenerated electrons during their transfer which is one of the biggest obstacles in the development of current photo-assisted rechargeable batteries. In this paper, a bifunctional cobalt-coordinated organic cathode is fabricated by combining 2,2′-bpy and DHBQ via Co by adopting the spin evaporation technique. It optimizes the pristine interfaces of photoactive and lithium storage units into a photoactive unit-metal interface and a metal-lithium storage unit interface through application of Co. In the presence of light, Co causes a strong metal-ligand charge transfer. Meanwhile, ligand-ligand charge transfer also takes place between the multi-ligands. The synergistic effect of these two phenomena offers a discharge capacity of 387 mAh g -1 which is significantly higher than that of 316 mAh g -1 recorded in the absence of light. The demonstrated design of bifunctional metal-ligand cathode by incorporation of photoactive ligands into lithium storage ligands through applications of metal centers can open the pathways for establishing a new type of photo-assisted lithium-ion batteries with higher efficiency and lower cost.

Synthesis of CuOQDs/g-C3N4/C Composites Via Stem Template Induction and their Photocatalytic Properties

Introduction: The synthesis of bio-templated porous CuOQDs/g-C3N4/C composites with controllable morphology and suitable energy band structure was successfully carried out via a simple thermal condensation and hydrothermal method. Method: Dicyandiamide and cadmium chloride were selected as starting materials, while Hollyhock stem was chosen as the biological template. The results indicated that, in comparison to pure g-C3N4, g-C3N4/C had a rich porous structure and better-photogenerated carrier separation efficiency. The CuOQDs were anchored evenly on the surface of the g-C3N4, thus resulting in the formation of a greater number of reactive sites. Results: The type-Z heterojunction formed between the CuOQDs and g-C3N4/C reduced the energy required for electron transition, thereby facilitating the separation of photo-generated electronhole pairs. The highest photocatalytic degradation efficiency of CuOQDs/g-C3N4/C for tetracycline (TC) was 65.1%, which was 3.3 times that of pure g-C3N4. Conclusion: In the photocatalytic process, the main reactive species is O2−. The CuOQDs/g- C3N4/C synthesized by stem induction in multi-phase heterojunction form has a stable microstructure to improve the charge separation efficiency. Further, it represents practical photocatalytic environmental protection.

Structural and optical features improvement of Tm3+–doped B2O3 – BaSO4 – TeO2 – Na2O glasses

Highly transparent sodium-telluro-sulphate-borate glasses doped with thulium (Tm3+) were useful for variety of purposes. Thus, a new type of glass system composed of (57- x)B2O3 – 20BaSO4 – 13TeO2 – 10Na2O – (x)Tm2O3 (x = 0.2 to 0.8 mol%) was produced via standard melt-quenching route. The impacts of different Tm3+ contents on the glasses’ physical and optical characteristics were ascertained for the first time. The amorphous nature of the samples was validated by their XRD patterns, and Raman analysis revealed the presence of various chemical functional groups. These samples exhibited Urbach energy, direct band gap and indirect band gap between 0.088 – 0.262 eV, 2.458 – 2.545 eV and 2.098 – 2.425 eV respectively. UV-Vis-NIR absorbance displayed six prominent peaks at 464, 657, 686, 795, 1210 and 1680 nm characteristics to various electronic transitions of Tm3+. The prepared glass composition could be effective in the production of solid-state lasers with a narrow wavelength range.

Electronic, thermodynamic, NLO, and spectroscopic properties of OAFLC compounds via DFT: A focus on 1F6B, 1F6Bi, 1F6BiN, and 1F6BN

This study presents a comprehensive quantum mechanical investigation of four novel liquid crystalline compounds: 1F6B, 1F6Bi, 1F6BiN, and 1F6BN. Using Density Functional Theory (DFT) with the B3LYP functional and 6-311G(d,p) basis set, we optimized the molecular geometries and analyzed their electronic and vibrational properties. Atomic Polar Tensor (APT) charge analysis showed significant charge distributions. Electrostatic potential (ESP) mapping identified potential reactive sites, while Electron Localization Function (ELF) and Localized Orbital Locator (LOL) analyses depicted the electron density distributions. Thermodynamic parameters indicated the compounds’ vibrational stability and responsiveness to thermal changes. Non-linear optical (NLO) properties were characterized by significant dipole moments and polarizabilities, suggesting potential in optoelectronic applications. Frontier molecular orbital analysis indicated stability with HOMO-LUMO gaps ranging from 4.15 to 4.64 eV. UV–Vis spectra revealed key electronic transitions, while Raman spectroscopy detailed various vibrational modes. The study offers valuable insights into the molecular behavior of these compounds, laying the groundwork for their future applications in material science and advanced technologies.

Supramolecular architectures, Hirshfeld surfaces analysis, spectroscopic, computational and photovoltaic properties of nickel(II) binary and ternary complexes of N-phenethyl-iminodiacetate (2-) chelate

The bluish-green color nickel(II) binary and/or ternary compounds have been isolated from the solution of stoichiometric reaction between Ni(II) hydroxy-carbonate and N-phenethyl-iminodiacetic acid (H2pheida) chelating ligand in aqueous media with compound (2); [Ni(pheida)(Him)3]·4H2O and without imidazole compound (1); [Ni(pheida)(H2O)3]. The crystal pattern of binary compound [Ni(pheida)(H2O)3] (1) differs from the related tetra-hydrated ternary complex of [Ni(pheida)(Him)3]·4H2O (2) can be attributed to the presence of stronger N-(Him) spacer of imidazole ligand. The compounds reported herein, have been characterized by means of elemental analysis, FTIR, UV–vis, TGA and X-ray crystallography. Moreover, the distinctive inter-molecular forces particularly H-bonding interactions, 2D fingerprint plots and supramolecular architecture have been studied using Hirshfeld surface analysis. The nickel(II) binary and ternary complexes (1) and (2) show distorted octahedral geometry around the Ni(II) ion of the type 1 + 2 + 2 + 1 imposed by 3d8 electronic configuration with degenerate fully and half occupied t2g6 and eg2 orbitals respectively. The higher John-Teller distortion has been observed for complex (2) than that of complex (1). The IDA arm of chelate adopted fac-NO2 conformation in both complexes (1) and (2). Moreover, the photovoltaic properties as semiconducting nature for ligand and their corresponding Ni(II) complexes were estimated using Tauc’s equation, αhν = A(hν-Eg)r, where r = ½ for indirect and 2 for direct electronic transitions through UV–vis absorption data. The indirect and direct electronic transition bandgap (Eg) calculated for complex (1) is 2.0 and 3.07 eV respectively. Similarly, 2.55 and 4.39 eV respectively measured for complex (2).

Vibrational assignments and energy analyses of 3,4-difluorophenylacetylene using resonance-enhanced multiphoton ionization and slow electron velocity-map imaging techniques

Here, we report spectroscopic investigations of 3,4-difluorophenylacetylene applying two-color resonant two-photon ionization (2C-R2PI) and slow electron velocity-map imaging (SEVI) techniques. With the assistance of density functional theory (DFT) calculations, vibrational modes of the S0 neutral ground state, S1 first electronic excited state, and D0 cationic ground state were assigned. The adiabatic excitation energy of the S1 ← S0 electronic transition was determined to be 35639 ± 5 cm−1 from the resonance-enhanced multiphoton ionization (REMPI) spectroscopy. Additionally, the adiabatic ionization potential was found to be 72398 ± 5 cm−1 based on the SEVI spectra.

Ultrafast Time-Domain Spectroscopy Reveals Coherent Vibronic Couplings upon Electronic Excitation in Crystalline Organic Thin Films.

The coherent coupling between electronic excitations and vibrational modes of molecules largely affects the optical and charge transport properties of organic semiconductors and molecular solids. To analyze these couplings by means of ultrafast spectroscopy, highly ordered crystalline films with large domains are particularly suitable because the domains can be addressed individually, hence allowing azimuthal polarization-resolved measurements. Impressive examples of this are highly ordered crystalline thin films of perfluoropentacene (PFP) molecules, which adopt different molecular orientations on different alkali halide substrates. Here, we report polarization-resolved time-domain vibrational spectroscopy with 10 fs time resolution and Raman spectroscopy of crystalline PFP thin films grown on NaF(100) and KCl(100) substrates. Coherent oscillations in the time-resolved spectra reveal vibronic coupling to a high-frequency, 25 fs, in-plane deformation mode that is insensitive to the optical polarization, while the coupling to a lower-frequency, 85 fs, out-of-plane ring bending mode depends significantly on the crystalline and molecular orientation. Comparison with calculated Raman spectra of isolated PFP molecules in vacuo supports this interpretation and indicates a dominant role of solid-state effects in the vibronic properties of these materials. Our results represent a first step toward uncovering the role of anisotropic vibronic couplings for singlet fission processes in crystalline molecular thin films.

Mott resistive switching initiated by topological defects

Avalanche resistive switching is the fundamental process that triggers the sudden change of the electrical properties in solid-state devices under the action of intense electric fields. Despite its relevance for information processing, ultrafast electronics, neuromorphic devices, resistive memories and brain-inspired computation, the nature of the local stochastic fluctuations that drive the formation of metallic regions within the insulating state has remained hidden. Here, using operando X-ray nano-imaging, we have captured the origin of resistive switching in a V2O3-based device under working conditions. V2O3 is a paradigmatic Mott material, which undergoes a first-order metal-to-insulator phase transition together with a lattice transformation that breaks the threefold rotational symmetry of the rhombohedral metallic phase. We reveal a new class of volatile electronic switching triggered by nanoscale topological defects appearing in the shear-strain based order parameter that describes the insulating phase. Our results pave the way to the use of strain engineering approaches to manipulate such topological defects and achieve the full dynamical control of the electronic Mott switching. Topology-driven, reversible electronic transitions are relevant across a broad range of quantum materials, comprising transition metal oxides, chalcogenides and kagome metals.

Synthesis, spectroscopic, computational, topology, and molecular docking studies on N,N'-(4-methyl-1,3-phenylene)bis(1-(2,4-dichlorophenyl)methanimine)

The study extensively examined N,N'-(4-methyl-1,3-phenylene)bis(1-(2,4-dichlorophenyl)methanimine) (6D). Advanced spectroscopic techniques, including IR, Raman, NMR, and UV-VIS spectroscopies, were employed to analyse the molecule. The Schiff base was ultimately confirmed using NMR spectrum analysis. The UV-VIS study revealed a notable bathochromic change in the compound, indicating their electronic transitions. By using the HOMO–LUMO bond gap the titled compound reactivity sites were identified. The compound 6D HOMO–LUMO band gap is 3.70 eV. Various wave function investigations like MESP, HOMO–LUMO, RDG, ELF, LOL, and ALIE were conducted to elucidate the distribution of electronic charge, providing valuable insights into the behaviour of molecules. The biological probability of the synthesised compound was extensively assessed using a docking study. Using MEP and HOMO–LUMO investigations, we confirm nucleophilic and electrophilic attacking sites. In the docking study, the protein Bovine cytochrome bc1 complex stigma Tellin bound (PDB ID–1PP9) was downloaded. The docking study identified the most stable minimum binding energy is –6.26 kcal/mol.

Optimization of Ultrafast Singlet Fission in One-Dimensional Rings Towards Unit Efficiency

Singlet fission (SF) is an electronic transition that in the last decade has been under the spotlight for its applications in optoelectronics, from photovoltaics to spintronics. Despite considerable experimental and theoretical advancements, optimizing SF in materials like multichromophoric systems and molecular crystals remains a challenge, due to the complexity of its analysis beyond perturbative methods. Here, we tackle the case of one-dimensional rings, aiming to promote singlet fission and prevent its backreaction. We study ultrafast SF nonperturbatively, by numerically solving a spin-boson model, via exact propagation and tensor network methods. By optimizing over a parameter space relevant to organic molecular materials, we identify two classes of solutions that can take SF efficiency beyond 85% in the nondissipative (coherent) regime, and to 99% when exciton-phonon interactions can be tuned. After discussing the experimental feasibility of the optimized solutions, we conclude by proposing that this approach can be extended to a wider class of optoelectronic optimization problems. Published by the American Physical Society 2024

High-pressure phase transitions of series of catenated nitrogen energetic crystals Nx (x = 4, 8, 10): A comparative DFT-D study.

High-pressure chemistry has advantages in exploring novel energetic materials and is the key to the development of new high-energy materials. The complexity and danger of experimental processes require a deeper understanding by advanced simulation techniques. Therefore, a high-precision comparative DFT-D study was performed to investigate the effect of pressure on series of catenated nitrogen energetic crystals. The results show that there exist phase transitions for N4, N8, and N10 at 4 GPa, 3 GPa, and 2 GPa respectively, which are embodied in various properties of these crystals. Studies on band gap and DOS indicate pressure-induced improvement on the ability for electrons transition from occupied orbitals to empty ones. Hirshfeld surface analysis qualitatively suggests that hydrogen bonding interactions are becoming dominant inter-molecular interactions. The topological analysis quantitatively reveals that pressure is beneficial to enhancing the inter-molecular hydrogen bonding energy, thereby playing an important role in the stability of high-pressure phases. The discussions on mechanical properties imply that pressure can improve the rigidity of these energetic systems and enhance their mechanical properties. Our findings evidence the high-pressure phase transitions for catenated nitrogen energetic crystals, which lay the theoretical foundation for the development of novel energetic materials. Series of catenated nitrogen energetic crystals N4, N8 and N10 were obtained from experiments. Optimizations were performed by GGA/PBE functional and G06 dispersion correction within the framework of CASTEP code, and the cutoff energies of the plane waves were set to 700 eV. The particular moiety in the crystals was extracted by Multiwfn 3.6 and subsequent analysis was conducted by Gaussian 09W package.

Demonstration of efficient Thomson cooler by electronic phase transition.

In the 1850s, Lord Kelvin predicted the existence of a thermoelectric cooling effect inside a whole material (the Thomson effect) according to thermodynamics1, in addition to the Peltier effect that enables cooling at the junction between dissimilar materials. However, the Thomson effect is usually negligible (ΔT/T < 2%) in conventional thermoelectric materials because the entropy change in charge carriers is fairly small2, leading to the guiding principles for advancing thermoelectric cooling to be based on the framework of the Peltier effect and that the figure of merit ZT should be maximized to optimize performance. Here, we demonstrate a Thomson-effect-enhanced thermoelectric cooler using a large Thomson coefficient (τ) induced by the direct manipulation of charge entropy through an electronic phase transition in YbInCu4. The devices achieve a steady temperature span (ΔT) of >5 K from T = 38 K. Our findings suggest not only another approach to advance thermoelectric coolers in addition to improving ZT but also technologically opens opportunities for solid-state cryogenic cooling applications.

Superorders and terahertz acoustic modes in multiferroic BiFeO3/LaFeO3 superlattices

Superlattices are materials created by the alternating growth of two chemically different materials. The direct consequence of creating a superlattice is the folding of the Brillouin zone, which gives rise to additional electronic bands and phonon modes. This phenomenon has been successfully exploited to achieve new transport and optical properties in semiconductor superlattices. Here, we show that multiferroic BiFeO3/LaFeO3 superlattices exhibit several structural orders parallel and perpendicular to the growth direction, not existing in individual bulk materials. Using transmission electron microscopy, x-ray diffraction, and first-principles calculations, we reveal in particular a new long-range order of tilted FeO6 octahedra, with a period along the growth direction about twice that of the chemical supercell, i.e., a superorder. The effect of this new structural order on the phonon dynamics is studied with ultrafast optical pump-probe experiments. While a folded-mode at 1.2 THz is attributed solely to the chemical modulation of the superlattice, the existence of another 0.7 THz mode seems to be explained only by a double Brillouin zone folding in agreement with the structural out-of-plane superorder. Our work shows that multiferroic BiFeO3/LaFeO3 superlattices can be used to tune the spectrum of coherent THz phonons, and potentially that of magnons or electromagnons.

Pressure induced tunable physical properties of cubic KHgF3 fluoro-perovskite: A first principle study

The structural, electronic, optical, mechanical, and thermodynamic properties of KHgF3 perovskite under various hydrostatic pressures are examined in this study in the frameworkof Density Functional Theory (DFT) with the Generalized Gradient Approximation (GGA) Perdew-Burke-Ernzerhof (PBE) exchange–correlation function. Tunable physical properties have been observed in KHgF3 as pressure is incrementally applied. The investigated compound displays mechanical instability beyond the pressure range of 0 to –10 GPa, as confirmed by the elastic constant analysis. Under ambient pressure, the lattice constants of KHgF3 closely align with theoretically calculated values, affirming the accuracy of this investigation. In addition, the bandgap of KHgF3 narrows with increasing pressure, facilitating easier electron transition from the valence band to the conduction band. The study reveals that when subjected to different hydrostatic pressures, fluctuations are observed in the peaks of the conductivity spectrum, loss spectrum, and absorption spectrum, particularly shifting towards higher photon energies, as analyzed through the optical properties. Moreover, KHgF3 exhibits ductile behavior at 0 GPa pressure, and this ductility rises with pressure. Thermodynamic analysis reveals a decrease in Debye temperature with increasing pressure, while the melting temperature rises correspondingly. The findings of this investigation also imply that KHgF3 can be a good candidate for optoelectronic device application under different hydrostatic pressures.

Investigating the Potential of Cr3+-Doped Pyroxene for Highly Sensitive Optical Pressure Sensing.

Luminescent manometry has gained significant popularity in recent years due to its capability to provide in situ pressure measurements in a remote manner. Therefore, there is a growing need to identify phosphors with pressure-dependent spectroscopic properties that can be utilized to develop highly sensitive pressure sensors operating over a wide pressure range. Hence, we present a novel temperature-invariant luminescent manometer based on Cr3+ ion emission in pyroxene Ca0.8Sr0.2MgSi2O6:Cr3+. We utilized two readout modes, including an innovative luminescent pressure sensing ratiometric approach based on the broad emission band associated with the 4T2g → 4A2g electronic transition of Cr3+ ions. This approach provided an exceptionally high sensitivity of SR = 50.7 ± 0.5% GPa-1 and ensured temperature-independent pressure measurements, thus offering highly reliable readouts. Furthermore, the proposed readout mode, which leverages changes in luminescence kinetics, demonstrated high sensitivity at high pressure at around 5 GPa (SR ∼ 8 ± 0.2% GPa-1) surpassing the performance of luminescence kinetics-based manometers reported to date. Consequently, Ca0.8Sr0.2MgSi2O6:Cr3+ emerges as a highly promising phosphor with significant application potential for pressure sensing across a broad pressure range.

A Discovery of Pressure-Induced New Semiconductor Electronic Phase Transitions by DFT Calculations: Introducing a Glimpse of a Novel Semiconductor Family.

This study introduces a discovery of pressure-induced new semiconductor electronic phase transitions. A novel semiconductor family that exhibits pressure-induced nonmonotonic changes in band gaps was found and meets the definition of phase transitions, challenging the traditional understanding of linear and monotonic band gap modification through pressurization. Our findings suggest a complex interplay of atomic spacing and electron orbital contributions under varying pressure conditions, resulting in the variation of band gaps. This behavior, which includes three distinct steps: first, narrowing, second, broadening, and third, narrowing again and ultimately metalizing; some compounds could bypass step 1, has potential applications in piezoelectric and semiconductor technologies. We propose two new semiconductor electronic phase transitions (SEPT) associated with specific inflection points in the pressure-dependent band gap curve. Our results open avenues for further research into the electronic properties of crystals under high pressure, with the ultimate goal of uncovering the more profound physical principles governing these phenomena.

Synthesis, characterization, and color performance of bis-azo and bis-pyrazole derivatives for dyeing of polyester

In this study, a novel series of bis-azo dyes 3–10 were synthesized via a two-step process. Initially, benzene-1,4-bis(diazonium) chloride was reacted with several active methylene compounds, such as ethyl acetoacetate, acetyl acetone, ethyl cyanoacetate, and malononitrile. yielding the corresponding bis-azo dyes 3–6. Subsequently, these dyes were cyclized through condensation with phenylhydrazine, resulting in the formation of bis-pyrazole derivatives 7–10. Comprehensive spectroscopic characterization, employing techniques like infrared (IR), nuclear magnetic resonance (NMR), and ultraviolet-visible (UV–Vis) spectroscopy, along with elemental analysis, elucidated the structural features, and electronic transitions of the synthesized dyes. The electronic absorption properties were investigated experimentally and computationally, revealing bathochromic and hypsochromic shifts influenced by substituents and tautomeric forms. The dyes showcased excellent dyeing performance on polyester fabrics, exhibiting notable color strength, perspiration fastness, light fastness, and wash fastness. Theoretical investigations of the electronic properties were conducted utilizing Density Functional Theory (DFT) methodology, employing the B3LYP functional with the 6–31G(d,p) basis set, enabling a comprehensive understanding of the structure-performance relationships governing the dyeing behavior of these dyes on polyester.

The Role of Spacers as a Probe in Variation of Photoluminescence Properties of Mono- and Bi-Nuclear Boron Compounds.

A series of N,O donor-based mono- and binuclear four-coordinated boron complexes were synthesized. Depending on the substitution and spacer, these complexes exhibit intense blue, green and yellow emission in solution states. Notably, the fluorescence quantum yields (ΦF) and fluorescence decay (lifetime, τ) of mononuclear boron complexes (2 a-2 e) were higher than the binuclear boron complexes (2 f-2 k). The lowest lifetime and quantum yield in binuclear boron complexes were due to intramolecular rotation induced non radiative processes. The disulphide spacer-based boron complexes 2 i-2 k showed aggregation-caused quenching in the THF/H2O mixture whereas no other complexes were ACQ responsive. These complexes show large Stokes shift, one of them i. e. 2 e has the highest Stokes shift of 130 nm. Further, the electrochemical study suggests the presence of two redox incidences. Theoretical studies show close corroboration between the TD-DFT computed and experimentally measured absorption maxima as well as DFT (GIAO) calculated and experimentally measured 11B NMR values. This complements the appropriate selection of the theoretical methods to shed light on the electronic transitions in the mono- and binuclear BF2 complexes.

MPS@BWO with High Adsorption Capacity for Efficient Photocatalytic Reduction of CO2

Photocatalysis can reduce CO2 to available energy by means of light energy, which is considered to be an effective solution to alleviate energy and environmental problems. In this paper, an MPS@Bi2WO6 composite photocatalyst was prepared by in situ hydrothermal method. BWO grew on the surface of MPS, which increased the CO2 absorption capacity of the photocatalyst and improved the microstructure. Under the synergistic effect of the two aspects, BWS achieves the enhancement of light energy absorption capacity and can effectively excite electron-hole pairs. The transition electrons with high reduction ability migrate to the surface and contact with high concentrations of CO2, achieving efficient CO2 reduction under visible light. Among the photocatalysts in this paper, BWS-1 (BWO: MPS = 1:1) has efficient CO2 gas phase reduction ability under visible light, and the CO yield reaches 29.51 μmol/g. The MPS@BWO photocatalyst is a low-cost and efficient CO2 photoreduction catalyst with broad application prospects.

Unraveling the reaction mechanism of alkali-activated materials through multi-scale modeling

As an environmentally friendly alternative to cement-based materials, alkali-activated materials (AAM) have attracted much attention due to their significant ability to reduce greenhouse gas emissions and effectively utilize industrial waste. Three Si-Al monomers ([SiO2(OH)2]2-, [SiO(OH)3]-, and [Al(OH)4]-) serve as the fundamental building blocks for the formation of AAM gels. Simulating their polycondensation reactions (PR) among these monomers is of paramount importance but faces a delicate balance between precision and efficiency. To unravel the PR mechanisms, we have integrated reactive force field molecular dynamics (MD) simulations with first-principles calculations based on density functional theory. Our 100ps MD simulations reveal that Al monomers exhibit faster reaction rates and lead to the formation of Si-Al oligomers with diverse structures. Subsequent first-principles calculations on transition state models derived from MD results uncover that PR pathways involving Al monomers possess lower energy barriers, which are correlated with changes in chemical bond strength arising from electronic orbital transitions. Our study, for the first time, establishes an intrinsic link among five hierarchical levels: electronic orbital structure, chemical bond strength, reaction energy barrier, reaction rate, and reaction scale. This provides invaluable theoretical guidance for designing energy-efficient and low-barrier reaction pathways for AAM gel formation.