Electron Reorganization Energies Research Articles

Tuning optical and electronic properties of indanthrene derivatives with electron-withdrawing groups (-Cl, -NO₂ and -C≡N) for enhanced organic solar cell performance: a DFT approach

Abstract In this study, we focused on improving the electronic and optical properties of the reference compound indanthrene (R) by introducing electron-withdrawing groups (−Cl, −C≡N, −NO₂). density functional theory and time-dependent density functional theory calculations were performed using Gaussian 16 software to study indanthrene derivatives as electron acceptor materials. The electronic and optical properties of the designed molecules (M1-M8) were investigated through frontier molecular orbital analysis, UV-visible absorption spectra, density of states, and transition density matrix analysis, utilizing GaussView 6.0 and Multiwfn 3.8 software. The designed molecules exhibit absorption across the entire visible spectrum, with maxima extending up to ~737 nm. Their electron affinity values range from 3.0 to 4.0 eV, surpassing the fullerene-based acceptor material. Among the designed molecules, M5 stands out with superior photovoltaic parameters, including a narrow optical band gap (~1.68 eV), exciton binding energy (0.25 eV), higher electron affinity (3.35 eV), an extended excited state lifetime (17.0 ns) owing to its low electron and hole reorganization energies (λe ~ 0.190 eV, and λh ~ 0.134 eV), and improved short-circuit current density of ~ 15.7 mA/cm². The photovoltaic parameters and power conversion efficiency were assessed using the Scharber and Alharbi models. The calculated device parameters, including light harvesting energy and photovoltaic characteristics (Voc, FF, Jsc, and PCE), suggest that these molecules, with electron-withdrawing groups, show great potential for use as acceptors in organic solar cells, particularly in terms of stability and power conversion efficiency. Notably, M2 and M5, with their PCE values exceeding 16%, emerge as outstanding candidates for device performance, impressively outperforming the other designed molecules.

Design and analysis of diisobutoxybenzodithiophene based donor for application in organic solar cell: DFT and TD-DFT Study

The newly designed chromophores (BT1-BT7) of the highly unsaturated donor-acceptor (D-A) were theoretically analyzed and recommended for applications in organic solar cells (OSCs). Conjugated A-groups have been replaced in the reference (BTR) during its design. The structural and optoelectronic properties of designed molecules were calculated using density functional theory (DFT) and Time-dependent DFT (TD-DFT) techniques. The frontier molecular orbitals (FMO) study revealed that BT7 has the lowest energy gap of 2.01 eV, which has significantly less than BTR (2.34 eV), and a significant amount of charge transfer (CT) between HOMO and LUMO has been observed. Out of all the newly designed chromophores in chloroform, the highest absorption spectra were found in the visible region with a bathochromic shift up to 768 nm. The dipole moment values of all the new chromophores (BT1-BT7) were significantly higher than the BTR (5.46 D), which resulted in good solvation. ESP analysis revealed electron distribution on various parts of the molecules by colored maps that are found to be effective for better ICT. The electron transition density resulting from light absorption at different chemical sites was shown using TDM plots. The electron and hole reorganization energy (RE) values were proved as highly efficient in promoting charge mobility and hindered charge recombination for new compounds. By scaling our designed donor to the recognized acceptor Y6, which has demonstrated the creation of OSCs, the open circuit voltage of each molecule was ascertained. The designed molecules exhibited higher open circuit voltages than the reference, indicating improved and fine-tuned optoelectronic properties that would aid in the development of solar cell devices in the future.

Molecular Design of n-Type Organic Semiconductors with Ultralow Electron Reorganization Energies.

Bottom-up design of n-type organic semiconductors with salient electron-transport properties is of fundamental importance. Here, with the aid of density functional theory, we demonstrate that condensing odd-membered carbon rings (5MR/7MR) to small polycyclic aromatic hydrocarbons (PAHs) can endow molecules with ultralow electron reorganization energies (λ < 100 meV). Studying 60 molecules, we find that introducing polycyclic fragments with built-in 5MR and 7MR to linear PAHs at the Cα,β positions or to nonlinear PAHs in D2h symmetry constitutes molecules with λ as low as 65 meV. A joint ACID and NICS analysis proves that the stronger the molecular aromaticity, the lower the λ will be. This is contrary to what has been previously found for p-type molecules. Furthermore, we propose "acupoints" on molecules for N-doping and cyanation, which can be used to precisely locate the substitution sites to reduce the LUMO energies (in favor of electron injection and air stability) of low-λ molecules while it does not elevate λ. These findings would help to reduce the synthetic blindness/cost and contribute to the bottom-up design of n-type small-molecule organic semiconductors.

Development of cost-effective diphenylamine substituted hole transporting materials for organic and perovskite solar cells

In recent years, material developments have continued to increase the performances of organic and perovskite solar cells (PSCs). Therefore, herein, we designed (HRN1-HRN11) and characterized eleven new hole transport materials (HTM) for PSCs. A systematic investigation has been conducted to investigate the optoelectrical characteristics of these HTMs. The optical characteristics and structure of these modeled HTMs have been analyzed using density functional theory (DFT) and time-dependent (TD-DFT). Ionization potential, electron density difference (EDD), electron and hole reorganizational energies, charge transfer analysis, transition density matrix, and molecular electrostatic potential analysis were performed to investigate the potential of these designed series (HRN1-HRN11) for PSCs. In comparison to the synthetic reference molecule (HRN), which has a band gap of 3.64 eV and a wavelength of 388.69 nm, the newly developed compounds (HRN1-HRN11) show promising optoelectronic qualities with much lower energy gaps (up to 2.01 eV) and absorbed maximum absorption wavelength (940.99 nm). Together with their excellent hole and electron transport capabilities, improved open-circuit voltage values of 1.06–1.34 eV are calculated. The acceptor and donor regions of HRN2, HRN7, and HRN1 exhibit great charge mobility and have the lowest electron reorganization energy. HRN9 has the greatest reorganization energy of hole (λh) value among all designed molecules. The work emphasizes designing suitable photovoltaic materials to produce highly efficient solar cell devices.

The Buddleja globosa (Matico) as natural Dye Sensitized Solar Cell: An experimental and theoretical studies based in TD-DFT/ periodic-DFT

The dye sensitizers coming from Buddleja Globosa, a Chilean regional flora, were analyzed and evaluated as a natural dye for the assembly of DSSC. The behavior toward the photoexcitation and electron injection steps was analyzed using time dependent functional theory (TD-DFT) and periodic (Periodic-DFT) calculations using a dye@(TiO2)48 model. The molecules analyzed present in the leaves were verbascoside, luteolin 7-O-glucoside, apigenin 7-O-glucoside, luteolin and gallic acid. The photoexcitation is driven by a π−π* transition localized in the frontier orbitals. These exhibit a ΔEHOMO−LUMO of approximately 4.0 eV which is very broad to facilitate an efficient photoexcitation process even though the LUMO density is localized in the acceptors group. In the adsorption and electron injection was found that the gallic acid and verbascoside facilitate a greater electron transport toward the metallic surface than the other dyes (ΔGinj = -1.52 and -1.03 eV, respectively). This was explained due to a low electron and hole reorganization energy in the gallic acid and verbacoside, respectively. Therefore, the greatest electron injection is originated due to a fast electron-hole transfer. Experimentally, a low overall conversion efficiency (η) was found. Thus, based in the computational discussion, this low efficiency is governed by the behaviour of the photoexcitation and not by the electron injection response.

Investigating the acceptor tuned effect on INPOD-based efficient D-π-A organic chromophores for optoelectronic utilization through quantum chemical analysis

In this study, the dye-sensitized solar cells and non-linear optical capabilities of newly designed ((E)-2-amino-5-((5-(4-p-tolyl-1,2,3,3a, 4,8 b-hexahydrocyclopenta [b]indol-7-yl)thiophen-2-yl)methylene)thiazol-4(5H)-one (INPOD)-based A1-A6 organic chromophores were examined. To create a D-π-A structure, the A1-A6 molecules were positioned on the electron donor, spacer, and acceptor, respectively. The use of hybrid functionals including PBEPBE, CAM-B3LYP, and MPW1PW91 was evaluated for the maximum absorption wavelength of INPOD. According to the calculated outcomes, MPW1PW91 exhibited λmax closest to INPOD. Consequently, the optical absorption spectra of A1-A6 were employed by this method to identify the key factors. The photovoltaic characteristics of these compounds in dye-sensitized solar cells were studied theoretically. The acceptor category affected the photovoltaic performance of A1-A6. Through the quantum chemical technique in time-dependent density functional theory methods, the electronic charge distribution and intramolecular charge transfer inside the A1-A6 were found. Time-dependent density functional theory calculations revealed that all A1-A6 had a λmax, that was greater than the INPOD (437 nm) in the range of 564–806 nm. A6 demonstrated an electron reorganization energy of 0.2340 eV, while a hole reorganization energy of 0.1006 eV. These values represent the maximum mobility of holes and electrons among all values. Additionally, the open circuit voltage was calculated after coupling each compound with a PTB7-Th. By the Voc of 2.10, 2.06, 2.22, and 2.08 eV, the A1, A3, A4, and A5 dyes produced the best results, respectively. The A1-A6 sensitizers were used to derive the non-linear optical properties of the dipole moment, polarizability, and first-order hyperpolarizability. It was noticed from the calculated results that the A2 and A6 molecules have the best options for non-linear optical activity. It tested how well the A1-A6 dyes performed in terms of charge transfer, dye regeneration, electron injection driving force, light harvesting efficiency, transition density matrix, molecular electro-potential, and density of states. The computed result showed that A2 and A6 chromophores are excellent candidates for dye-sensitized solar cells. Finally, those dye derivatives would certainly work effectively as tuning-A in optoelectronic applications.

Tuning optoelectronic properties of indandione-based D-A materials by malononitrile group acceptors: A DFT and TD-DFT approach.

Indandione-based materials are promising candidates for organic electronics, offering high electron mobility and tunable optoelectronic properties. In this study, we explore the optoelectronic and photovoltaic properties of indandione-based donor-acceptor (D-A) materials, specifically (R1) and (R2), by introducing malononitrile group acceptors into their molecular structure. These strong electron-withdrawing acceptors are designed to enhance charge transfer and overall material performance. The designed molecules (DM1-DM4) exhibit a low optical band gap of approximately 1.77eV, significantly lower than the reference materials (R1 and R2) at around 2.24eV in a solvent environment. Among the designed molecules, DM4 stands out with superior photovoltaic parameters, including a narrow optical band gap (1.77eV), higher electron affinity (3.49eV), an extended excited state lifetime (10.0ns) owing to its low electron and hole reorganization energies (λe ~ 0.13eV and λh ~ 0.24eV), and improved short-circuit current density (Jsc) of ~ 15.73mA/cm2. Notably, DM4 achieves a power conversion efficiency (PCE) of ~ 18.5%, making it an excellent candidate for device applications. A comprehensive computational investigation was carried out on indandione-based D-A materials with malononitrile group acceptors (DM1-DM4) using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods, as implemented in Gaussian 16 software. We examined the electronic and optical properties of the proposed molecules through frontier molecular orbital (FMO) analysis, UV-Vis absorption spectra, density of states (DOS), exciton binding energy (Eb), and transition density matrix (TDM) analysis, utilizing GaussView 6.0 and Multiwfn 3.8 software. The photovoltaic parameters and power conversion efficiency (PCE) were evaluated using the Scharber and Alharbi models.

Theoretical investigation of benzodithiophene-based donor molecules in organic solar cells: from structural optimization to performance metrics.

Achieving high power conversion efficiency (PCE) remains a significant challenge in the advancement of organic solar cells (OSCs). In the field of organic photovoltaics (OPVs), considerable progress has been made in optimizing molecular structures to improve the PCE. However, innovative material design strategies specifically aimed at enhancing PCE are still needed. Here, we have designed BDTS-2DPP-based molecules and propose a molecular design approach to develop donor materials that can significantly improve the PCE of OSCs. Density functional theory (DFT) and time-dependent DFT (TD-DFT) methods have been adopted in both gas and solvent phases. Our newly designed molecule M1 shows the highest absorption value (λ max = 846 nm), highest electron reorganization energy (λ e = 0.18 eV), and the lowest energy gap (E g = 1.81 eV) among all the designed molecules. M1 molecule also exhibits the highest dipole moment in both gas (10.62 D) and solvent phase (13.62 D), and their ground and excited state dipole moment difference is also higher (μ e - μ g = 2.99 D), which enhances its separation to make it a suitable candidate for charge transfer between HOMO-LUMO (97%). Newly designed molecule M3 is observed to have the highest voltage when the current is zero (V oc = 1.15 V) highest PCE value (21.90%) and highest fill factor (FF) value (89.42%). The lowest excitation binding energy is estimated by newly designed molecule M2 (E b = 0.30 eV), which indicates a higher rate of dissociation during the excitation as observed in transition density matrix (TDM) plots. Utilizing electron density difference maps, the newly designed molecules in dichloromethane solvent exhibited consistent intramolecular charge transfer (ICT). The designed molecules were evaluated against reference molecule R to determine if they exhibit superior optoelectronic capabilities. It is found that all designed molecules (M1-M5) exhibit reduced band gaps, are red-shifted in wavelength in comparison to a reference molecule R, and have remarkable charge motilities in terms of reorganisation energies.

Advancements in optical and optoelectronic characteristics of benzotriazole-based asymmetric non-fullerene acceptors for organic photovoltaics

The development of energy-efficient non-fullerene acceptors (NFAs) has attracted much attention in producing efficient organic solar cells (OSCs). These innovative materials are considered a promising alternative to traditional fullerene acceptors because they absorb a broader light range and potentially enhance the OSC performance. Herein, we engineered eleven new asymmetric caterpillar-shaped materials with an A1-D-A2-A1 core as NFAs for OSCs. These efficient materials offer a high absorption efficiency, wide energy level range, and efficient charge transport capabilities. To engineer these caterpillar-shaped NFAs (FT1-FT11), we performed various synergistic modulations of end-capped electron-withdrawing moieties and side-chain engineering on the synthetic reference molecule (FT). The electron and hole reorganization energies, binding energy, transition energy, transition density analysis, electrostatic potential, and photovoltaic characterizations have been performed for these designed caterpillar-shaped (FT1–FT11) series. The designed materials (FT1–FT11) showed a lower binding energy of 0.45 eV, a narrower bandgap (2.11 eV), higher absorption (ranges from 700.44 nm to 781.05), and low electron and hole mobilities (0.0029 and 0.0031) compared to reference molecule FT. To investigate the charge transport process, we employed polymer donor PTB7-Th and efficient NFA acceptor FT11 to establish a donor:acceptor complex (FT11:PTB7-Th). The complex study demonstrates a significant charge transformation at the donor-acceptor interface. As a result, the developed compounds (FT1–FT11), with their superior optoelectronic capabilities, could be viewed as a viable and sustainable choice to fabricate next-generation efficient OSCs.

The impact of hetero-aromatic rings on optoelectronic and charge transport properties of fused polycyclic compounds

The structural, optoelectronic, and charge-transport properties of linearly fused polycyclic hydrocarbon molecules with heteroatoms (NH, O, S, and Se) in five-membered rings have been investigated using the DFT approach. The hybrid functional B3LYP in combination with the 6–311 + G (d,p) basis set is utilized in the Gaussian 16 W software package for all the calculations. The absorption and emission energies are investigated by using time-dependent density functional theory (TD-DFT) at the same level of theory. To investigate the stability of each molecule concerning its aromaticity, nucleus-independent chemical shift (NICS) values are computed. Electron affinity (EA), hole extraction potential (HEP), ionization potential (IP), and electron extraction potential (EEP) are also reported. The simulated hole (λ h) and electron (λ e) reorganization energies for the majority of the molecules are lower than the characteristics hole and electron-transporting materials. The reported fused polycyclic compounds may have potential applications in optoelectronic devices.

Analysis of the nonlinear optical properties, vibrational spectra, DFT method and photovoltaic performance of cyanidin-3-rutinoside chloride

This study aims to identify a cyanidin-3-rutinoside chloride that exhibits both photovoltaic performance and nonlinear optical properties, which may be utilized in the field of optoelectronics. Prior to investigating these properties, the stable structure must be determined. For this purpose, its conformational analysis is performed by the Molecular Force Field method with the spartan program. The exact nature of the stable configuration has been ascertained by empirical evidence. The energy of the stable configuration is -1654184.76 kcal/mol, and its dipole moment is 9.94 Debye. Cyanidin-3-rutinoside chloride has been investigated using experimental FT-IR and Raman spectroscopies. Meanwhile, the DFT method at the B3LYP/6-311 + + G(d, p) level was employed in order to study the simulated FT-IR and Raman spectra, the HOMO-LUMO analysis, the molecular electrostatic potentials (MEP), and the non-linear optical (NLO) characteristics of the title molecule. The HOMO and LUMO energies are − 6.45 and − 3.64 electron volts (eV), respectively, with a gap value of 2.81 eV. Additionally, the title compound’s open-circuit voltage, the transition density matrix light-harvesting efficiency, driving force, and binding energy were calculated with by taking photovoltaic cell properties into account. Furthermore, investigations of hole reorganization energy, electron reorganization energy, and total reorganization energy were carried out at the B3LYP/6-31G(d, p) level for the cyanidin-3-rutinoside chloride of interest. In addition, density of state calculations and NBO were made at the B3LYP/6-31G(d, p) level. We calculated the following values for LHE, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{V}_{oc}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{{\\Delta\\:}\ ext{G}}_{\ ext{i}\ ext{n}\ ext{j}\ ext{e}\ ext{c}\ ext{t}}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{E}_{b}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{\\lambda\\:}_{h}$$\\end{document}, \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{\\lambda\\:}_{e}$$\\end{document} and \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\:{\\lambda\\:}_{total}$$\\end{document} : 0.06, 2.45 eV, 0.20 eV, 0.56 eV, 0.50 eV, 0.57 eV and 1.06 eV, respectively.

Styrene monomer as potential material for design of new optoelectronic and nonlinear optical polymers: density functional theory study.

Using density functional theory, we have studied the intrinsic properties of styrene. First, we determine the optimized structures, structural parameters and thermodynamic properties to make our simulations more realistic to experimental results and check the stability. Second, we investigate optoelectronic, electronic and global descriptors, transport properties of holes and electrons, natural bond orbital analysis, absorption and fluorescence properties. Finally, we study nonlinear optical (NLO) properties: first- and second-order hyperpolarizability, second and third-order optical susceptibilities, hyper-Rayleigh scattering hyperpolarizability, electro-optical Pockel effect, direct current Kerr effects and quadratic refractive index. The bandgap energy E g = 5.146 eV and dielectric constant show that styrene is a good insulator with an average electric field value of 4.43 × 108 Vm-1. Thermodynamic findings show that our molecule is thermodynamically and chemically stable. Electron and hole reorganization energies of 0.393 and 0.295 eV, respectively, show that styrene is more favourable to hole transport than electron transport. Styrene is transparent with linear refractive index n = 1.750 and quadratic n 2 = 1.748 × 10-20 m2 W-1. At the NLO, styrene has a non-zero value of which confirms the existence of first-order NLO activity. Globally the study shows that the styrene monomer is suitable for the architecture design of new polymer materials for NLO applications and optoelectronic by functionalization.

Theoretical investigation of the electronic and second-order non-linear optical properties of [n]helicene derivatives

Designing and synthesizing nonlinear optical materials with excellent performance has always been a persistent goal pursued by material chemists. In paper, based on the reported [6]heliceno-bis(naphthalimides) 2, four new molecules are designed by introducing 2-dicyanomethylene-1,3-dithiole on the two middle benzene rings of the naphthalimide unit and replacing CH3 units on the R1 and R2 substituents with NH2/NO2 moieties, or their combination. The electronic spectra, reorganization energy and second-order nonlinear optical properties of the reported derivatives 1 and 2, as well as four newly designed derivatives, have been systematically investigated by means of (time-dependent) density functional theory calculations. Frontier molecular orbital analysis, electron excitation analysis, reorganization energy, and the calculation of the static and dynamic first hyperpolarizability all indicate that the studied system is greatly influenced by the number of benzene rings in helicene core and the terminal substituents attached at both ends of helicene core. Further analysis of depolarization, hyperpolarizability density and unit sphere representation reveals the nature of the nonlinear optical response of the studied system. Considering that the studied derivatives all have large static first hyperpolarizabilities (e.g., 210 × 10-30 esu for derivative 5) and small reorganization energy (e.g., 0.092 eV of hole reorganization energy and 0.118 eV of electron reorganization energy for derivative 3), they are expected to become potential nonlinear optical materials with excellent performance and bipolar transport materials. This work contributes to the rational design of high-performance molecules based on [n]helicenes derivatives and further explores their potential applications in optical materials.

Benzotrifuran based organic molecules for optoelectronic and charge transport properties for organic electronic devices

AbstractThe key motive of the current work is the detailed study of charge transport and optoelectronic properties of Benzotrifuran based organic molecules for organic electronic device applications. Density functional theory (DFT) and time dependent‐DFT simulations were executed on studied organic molecules. The absorption characteristics are ascertained and the results are compared with corresponding known experimental results. Frontier molecular orbitals, that is; highest occupied molecular orbital and lowest unoccupied molecular orbital, electron extraction potential, electron affinities, ionization potentials, reorganization energies (Z), and hole extraction potential of all the studied molecules are explored. In contrast, all of the examined organic compounds are with low hole (Zh) and electron (Ze) reorganization energies, making them suitable for use in organic electrical devices.

Theoretical screening of N-[5'-methyl-3'-isoxasolyl]-N-[(E)-1-(-2-thiophene)] methylidene]amine and its isoxazole based derivatives as donor materials for bulk heterojunction organic solar cells: DFT and TD-DFT investigation.

In the present work, the influence of aromatic ring substitution on a series of small-donor organic molecules (A, B, C, D, and E) with isoxazole cores was investigated for photovoltaic applications in organic solar cells. Frontier molecular orbital analysis, chemical reactivity descriptors, dipole moment, and population analysis showed that all the organic materials have intramolecular charge transfer abilities capable of donating electrons to the acceptor material (PCBM). The required photovoltaic parameters such as Voc, FF, Jsc, LHE, and other associated optoelectronic parameters are reported. The results demonstrate that aromatic ring substitution influences charge transfer and power conversion efficiencies of solar cells. That is, an increase in the aromatic character of a material increases its charge transfer, and as a result, its photovoltaic properties are increased. Additionally, all the investigated derivatives are good charge transporters with suitable electron reorganization energies, which are beneficial for minimizing energy loss. Hence, these organic derivatives with isoxazole backbones are promising materials and may provide fresh insights into the design of new materials for organic solar cell applications. All calculations were performed using DFT and the ORCA 4.1.0 program package as the main tool for geometry optimization and frequency calculations. The Avogadro 1.2.1 visualization tool was used to prepare all input files executed by ORCA 4.1.0. The BP86, B3LYP, and wB97M series of functionals coupled with the def2/TZVP basis set were employed for geometry optimization. All energy-related calculations were carried out using the M06-2x functional. Multiwfn version 3.7 was used for aromaticity and population analysis. Excited state and UV-visible spectra were simulated using the TD-DFT method at the CAM-B3LYP-D3, wB97X-D3, and PBE0-D3 coupled with the ma-def2-TZVP basis set. Moreover, solvent effects were incorporated using the SMD scheme as incorporated in the ORCA software. Lastly, the RIJCOSX approximations were used to speed up calculations while maintaining accuracy.

Exploring the effects of mono-bromination on hole-electron transport and distribution in dibenzofuran and dibenzothiophene isomers: a first-principles study.

This study delves into hole-electron transport and distribution properties inherent in mono-brominated dibenzofuran (DBF) and dibenzothiophene (DBT) isomers. As determined by frontier molecular orbitals, all brominated structures have narrower bandgaps than their primary structures. The TD-DFT calculation showed that 2BDBT had the highest absorption wavelength of all molecules at 315.35nm. Notably, the study unveils remarkably low electron and hole reorganization energies due to bromine substitution in DBF and DBT molecules. Specifically, the 4BDBF has the lowest hole reorganization energy of all DBF configurations, 0.229eV. In addition, 3BDBF has 0.226eV less electron reorganization energy than all other molecules. Compared to DBT, 3BDBT has the lowest electron reorganization energy of 0.254eV. Overall, this research sheds significant light on the fundamental electronic and hole transport characteristics of bromine-substituted DBF and DBT isomers, highlighting their promising role in polymer design as donors/acceptors for advanced organic electronic applications. Molecular structures were optimized using Density Functional Theory (DFT) B3LYP/6-311 + + G (d, p) level of theory, and the study further elucidates these molecules' energy levels and absorption spectra through Time-Dependent Density Functional Theory TD-DFT; these calculations were performed using Gaussian 09W software package. The key parameters such as reorganization energies, Electron Localization Function map, Laplacian Bond Order, and NCI-RDG were meticulously examined for the molecules with the results of DFT calculations were analyzed and displayed by utilizing the software packages VMD 1.9.4 and Multiwfn 3.8, aiming to comprehend their charge transport and distribution properties.

Multi‐Selenophene Strategy Enables Dimeric Acceptors‐Based Organic Solar Cells with over 18.5% Efficiency

AbstractDimeric acceptor (DMA) becomes a promising alternative to small‐molecular and polymeric acceptor‐based organic solar cells (OSCs) due to its well‐defined chemical structure, high batch‐to‐batch reproducibility, and low molecular diffusion properties. However, DMAs usually exhibit blueshifted absorptions, limiting their photon utilization abilities. Herein, multi‐selenophene strategies are adopted to develop redshifted DMAs. From monomer (YSe) to dimers (DYSe‐1 and DYSe‐2), reduced electron reorganization energies and exciton binding energies enable the efficient charge dynamics in the DMAs‐based OSCs. Together with their effective absorption extending to ≈920 nm, DYSe‐1‐ and DYSe‐2‐ based OSCs exhibit outstanding short‐circuit current densities (JSCs) over 27 mA cm−2, which are the best among DMAs. Besides, compared with the YSe‐based device, both DMA‐based devices have higher electroluminescence quantum efficiencies and thus reduce nonradiative recombination loss (ΔE3), contributing to their reduced energy losses. The resultant open‐circuit voltages (VOCs) of DYSe‐1‐ and DYSe‐2‐ based OSCs are ≈0.88 V, which, combining their super JSC values, lead to the promising power conversion efficiencies of 18.56% and 18.22%, respectively. These results are among the best in DMAs‐based OSCs and highlight the great potential of the multi‐selenophene strategy for the development of redshifted DMAs with high performance.

Novel alkyne chromophore of the isophorone derivatives: synthesis, electrochemical evaluation, DFT, and processable bottom contact/top-gate OFET applications

Fused alkyne molecules are important in organic semiconductors due to their desirable properties. Here, we report the design and synthesis of a new series of A–π–D molecules (III–VII) that can serve as mild electron acceptors to generate wide-bandgap p-type small compounds for use in organic field-effect transistors. The incorporation of donor units into fused isophorone frameworks can be used to tune the frontier molecular orbital energies. The electrochemical, optical, and thermal properties of the compounds were characterized. Compound VI, which has a fused phenyl-substituted alkyne moiety, had the highest occupied molecular orbital energy level as determined by optical and electrochemical analysis. Density functional theory calculations revealed that compounds VI and III had lower hole reorganization energy (λh) than the corresponding isophorone extended conjugated-based compounds (I–II). Conversely, compounds I and II had lower electron reorganization energy (λe) than the corresponding fused alkyne compounds. This is in line with the observed adiabatic ionization potential and electron affinity values. Consequently, devices fabricated with compound VI exhibited high mobility and low threshold voltage.

5‐Bromosalicylaldehyde: Theoretical, Experimental and Spectroscopic (FT‐IR, Raman, H1and C13‐NMR, UV‐Vis) Studies and Their Photovoltaic Parameters

AbstractThis study aims to identify a 5‐bromosalicylaldehyde (5BSA) and assess its performance for application in organic solar cells. In the current work, the 5BSA was investigated using various techniques such as FT‐IR, Raman, NMR, and UV‐Vis spectroscopy to characterize the title molecule. The possible conformers of the 5BSA were studied using the MMFF methodology in Spartan software. The geometry optimization of modifications for each conformation was computed using the DFT approach for the B3LYP/6‐311++G(d,p) functional. The energy and dipole moment of most stable form were determined −1879057.42 kcal/mol and 1.455 Debye, respectively. The FT‐IR and Raman vibrational frequencies, the H1and C13NMR chemical shift values (in vacuum and in DMSO‐d6), the UV spectrum calculations (both in vacuum and in the solvent ethanol), the HOMO‐LUMO energy, and the map of MEP. Meanwhile, by considering the properties of organic photovoltaic cells, the open‐circuit voltage (VOC), hole reorganization energy (λh) and electron reorganization energy (λe), light‐harvesting efficiency (LHE), total reorganization energy (λtotal), the short‐circuit current density (Jsc), the driving force (ΔGinject), binding energy (Eb) were also computed for the title compound. In addition, transition density matrix (TDM) and density of states (DOS) analyses were conducted for the 5BSA molecule.

Estimation of the Charge Mobility of Phenanthroline derivatives with the view of Density Functional Theory: Reorganization Energy and Charge Transfer Integral are in play

Molecular arrangement and noncovalent interactions in organic materials greatly influence the charge mobility in organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), and organic field-effect transistors (OFETs). In the light of the this argument, we examined the electronic properties of the phenanthroline derivatives by considering the charge mobility with the combination of density functional theory and Marcus Charge Transfer Theory. The drift electron mobility of the molecule 1 and 2 were determined to 21.13 cm2 V-1 s-1 and 18.00 cm2 V-1 s-1, respectively through J type π⋯π stacking interactions created by small perpendicular distances between the adjacent rings. The effective charge pathways of the molecules were generated with strong π⋯π stacking interactions consolidated by noncovalent interactions in their solid phases. The electron reorganization energy for both molecules were determined smaller than that of holes which means they have n-type semiconductor properties. The charge transfer integrals were calculated with the optimization of molecules’ dimer configurations that the theoretical results demonstrate the charge transfer integral depends on the distance between the stacking rings. High charge transfer integral and small reorganization energy give the high charge mobility fort he semiconductor molecules. Beside the mobility, energy band gap, ionization potential, electron and hole injection barriers of the molecules were interpreted to further understand their electronic properties. Due to the small LUMO values which provide n-type molecule and small electron injection barrier. From the our work both molecules can be effective n type organic semiconductor devices with the high mobility and can be modified for more efficient charge transport in phenanthroline derivatives.