Electronic Metal-support Interactions Research Articles

Band gap effect of TiO2 on supported Ru single-atom catalysts for CO2 methanation by DFT calculations

The influence of TiO2 band gap on structure and reactivity of the supported single ruthenium (Ru1) atom was studied by density functional theory calculations, utilizing Ru1/2L-TiO2 and Ru1/3L-TiO2 as model catalysts for CO2 methanation. The supports have band gaps of 2.39 eV and 1.48 eV, respectively. The band gap plays a significant role in electronic metal-support interactions (EMSIs) and the position of the d-band center of the Ru1 on the TiO2. The Ru1/3L-TiO2, the Ru1 catalyst supported on the 3L-TiO2 with a narrower band gap, shows enhanced EMSIs and a d-band center that is positioned farther from Fermi level, leading to lower charge density on the Ru1 and weaker adsorption of H2, CO2, and CO compared to the Ru1/2L-TiO2. CO2 methanation followed CO pathway, with the hydrogenation of CO* to HCO* identified as the rate-determining step on the Ru1/nL-TiO2. The Ru1 catalyst supported on TiO2 with a narrower band gap is more favorable kinetically and thermodynamically for CO2 methanation, despite the band gap not altering the reaction pathway. Enhanced hydrogen mobility and a pronounced promotional effect of hydrogen on CO adsorption, due to the narrower band gap support, are key factors facilitating the easier hydrogenation of CO* on the Ru1/3L-TiO2.

Strong Metal-Support Interaction between Pt and TiO2 over High-temperature CO2 Hydrogenation.

The catalytic activities and stability of oxide-supported metal catalysts are significantly affected by metal-support interactions (MSI) between oxidic supports and supported metals. The surface properties of the support, such as its phase and defects, are crucial in MSI, including both the strong metal-support interaction (SMSI) and electronic metal-support interaction (EMSI). In this study, modulation of SMSI was achieved on rutile-supported Pt nanoparticles (NP) over high-temperature CO2 hydrogenation. The encapsulation of Pt NP surfaces with TiO2-x overlayers is precisely controlled by the defects. It is found that oxygen vacancy defects significantly enhance the catalytic stability of Pt/rutile under high-temperature reverse water-gas shift (RWGS) reaction by inhibiting the occurrence of SMSI. Pt/rutile with oxygen vacancies achieves a 301 molCO×gM-1×h-1 space time yield and considerably catalytic stability (decreased by 8%) at 800 °C over 100 h time-on-stream. Density functional theory (DFT) calculations suggest that the adsorption capacity of Pt NP on the rutile overlayer can be reduced by increasing electron density. Experimental results combined with DFT calculations show that electron transfer from Pt NP to rutile is reduced by the oxygen vacancy defects on Pt/R, preserving the metallic nature of Pt species during CO2 hydrogenation, thereby preventing the formation of SMSI.

Strong Metal‐Support Interaction between Pt and TiO2 over High‐temperature CO2 Hydrogenation

The catalytic activities and stability of oxide‐supported metal catalysts are significantly affected by metal‐support interactions (MSI) between oxidic supports and supported metals. The surface properties of the support, such as its phase and defects, are crucial in MSI, including both the strong metal‐support interaction (SMSI) and electronic metal‐support interaction (EMSI). In this study, modulation of SMSI was achieved on rutile‐supported Pt nanoparticles (NP) over high‐temperature CO2 hydrogenation. The encapsulation of Pt NP surfaces with TiO2−x overlayers is precisely controlled by the defects. It is found that oxygen vacancy defects significantly enhance the catalytic stability of Pt/rutile under high‐temperature reverse water‐gas shift (RWGS) reaction by inhibiting the occurrence of SMSI. Pt/rutile with oxygen vacancies achieves a 301 molCO×gM‐1×h‐1 space time yield and considerably catalytic stability (decreased by 8%) at 800 °C over 100 h time‐on‐stream. Density functional theory (DFT) calculations suggest that the adsorption capacity of Pt NP on the rutile overlayer can be reduced by increasing electron density. Experimental results combined with DFT calculations show that electron transfer from Pt NP to rutile is reduced by the oxygen vacancy defects on Pt/R, preserving the metallic nature of Pt species during CO2 hydrogenation, thereby preventing the formation of SMSI.

Self-Reconstruction Induced Electronic Metal-Support Interaction for Modulated Cu+ Sites on TiO2 Nanofibers in Electrocatalytic Nitrate Conversion.

The Cu+ active sites have gained great attention in electrochemical nitrate reduction, offering a highly promising method for nitrate removal from water bodies. However, challenges arise from the instability of the Cu+ state and microscopic structure over prolonged operation, limiting the selectivity and durability of Cu+-based electrodes. Herein, a self-reconstructed Cu2O/TiO2 nanofibers (Cu2O/TiO2 NFs) catalyst, demonstrating exceptional stability over 50 cycles (12 h per cycle), a high NO3 --N removal rate of 90.2%, and N2 selectivity of 98.7% is reported. The in situ electrochemical reduction contributes to the self-reconstruction of Cu2O/TiO2 nanofibers with stabilized Cu+ sites via the electronic metal-support interaction between TiO2 substrates, as evidenced by in situ characterizations and theoretical simulations. Additionally, density functional theory (DFT) calculations also indicate that the well-retained Cu+ sites enhance catalytic capability by inhibiting the hydrogen evolution reaction and optimizing the binding energy of *NO on the Cu2O/TiO2 NFs heterostructure surface. This work proposes an effective strategy for preserving low-valence-state Cu-based catalysts with high intrinsic activity for nitrate reduction reaction (NO3RR), thereby advancing the prospects for sustainable nitrate remediation technologies.

Highly active ternary Ir/In2O3-ZrO2 catalyst for CO2 hydrogenation towards methanol: The role of zirconia

Indium oxide supported iridium catalyst has been verified to be highly active and selective for CO2 hydrogenation to methanol. In this work, zirconia is introduced into the Ir/In2O3 system as a novel Ir/In2O3-ZrO2 ternary catalyst. The solid solution generated between ZrO2 and In2O3 exhibits a strong electronic metal-support interaction with iridium, rendering the supported iridium species highly dispersed in a form of clusters. Thereout, an active interface between iridium and the solid-solution carrier is thus generated, on which electron transport is more feasible with a stronger CO2 adsorption than that of on the Ir−In2O3 interfacial site. Moreover, compared to Ir/In2O3, this ternary catalyst exhibits better catalytic activity as well as the stability. Density functional theory (DFT) simulations, combined with the in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) studies, further demonstrate the CO-hydrogenation pathway is the most favored for methanol synthesis, providing a rationale for the superior methanol selectivity of the Ir/In2O3-ZrO2 catalyst during CO2 hydrogenation.

Regulating Atomically-Precise Pt Sites for Boosting Light-Driven Dry Reforming of Methane.

Light-driven dry reforming of methane is a promising and mild route to convert two greenhouse gas into valuable syngas. However, developing facile strategy to atomically-precise regulate the active sites and realize balanced and stable syngas production is still challenging. Herein, we developed a spatial confinement approach to precisely control over platinum species on TiO2 surfaces, from single atoms to nanoclusters. The configuration comprising single atoms and sub-nanoclusters engenders pronounced electronic metal-support interactions, with resultant interfacial states prompting surface charge rearrangement. The unique geometric and electronic properties of these atom-cluster assemblies facilitate effective activation of CH4 and CO2, accelerating intermediate coupling and minimizing side reactions. Our catalyst exhibits an outstanding syngas generation rate of 34.41 mol gPt -1 h-1 with superior durability, displaying high apparent quantum yield of 9.1 % at 365 nm and turnover frequency of 1289 h-1. This work provides insightful understanding for exploring more multi-molecule systems at an atomic scale.

Electronic Metal‐Support Interaction Induces Hydrogen Spillover and Platinum Utilization in Hydrogen Evolution Reaction

The substantial promotion of hydrogen evolution reaction (HER) catalytic performance relies on the breakup of the Sabatier principle, which can be achieved by the alternation of the support and electronic metal support interaction (EMSI) is noticed. Due to the utilization of tungsten disulfides as support for platinum (Pt@WS2), surprisingly, Pt@WS2 demands only 31 mV overpotential to attain 10 mA cm‐2 in acidic HER test, corresponding to a 2.5‐fold higher mass activity than benchmarked Pt/C. The pH dependent electrochemical measurements associated with H2‐TPD and in‐situ Raman spectroscopy indicate a hydrogen spillover involved HER mechanism is confirmed. The WS2 support triggers a higher hydrogen binding strength for Pt leading to the increment in hydrogen concentration at Pt sites proved by upshifted d band center as well as lower Gibbs free energy of hydrogen, favourable for hydrogen spillover. Besides, the WS2 shows a comparably lower effect on Gibbs free energy for different Pt layers (‐0.50 eV layer‐1) than carbon black (‐0.88 eV layer‐1) contributing to a better Pt utilization. Also, the theoretical calculation suggests the hydrogen spillover occurs on the 3rd Pt layer in Pt@WS2; moreover, the energy barrier is lowered with increment in hydrogen coverage on Pt.

Electronic Metal-Support Interaction Induces Hydrogen Spillover and Platinum Utilization in Hydrogen Evolution Reaction.

The substantial promotion of hydrogen evolution reaction (HER) catalytic performance relies on the breakup of the Sabatier principle, which can be achieved by the alternation of the support and electronic metal support interaction (EMSI) is noticed. Due to the utilization of tungsten disulfides as support for platinum (Pt@WS2), surprisingly, Pt@WS2 demands only 31 mV overpotential to attain 10 mA cm-2 in acidic HER test, corresponding to a 2.5-fold higher mass activity than benchmarked Pt/C. The pH dependent electrochemical measurements associated with H2-TPD and in-situ Raman spectroscopy indicate a hydrogen spillover involved HER mechanism is confirmed. The WS2 support triggers a higher hydrogen binding strength for Pt leading to the increment in hydrogen concentration at Pt sites proved by upshifted d band center as well as lower Gibbs free energy of hydrogen, favourable for hydrogen spillover. Besides, the WS2 shows a comparably lower effect on Gibbs free energy for different Pt layers (-0.50 eV layer-1) than carbon black (-0.88 eV layer-1) contributing to a better Pt utilization. Also, the theoretical calculation suggests the hydrogen spillover occurs on the 3rd Pt layer in Pt@WS2; moreover, the energy barrier is lowered with increment in hydrogen coverage on Pt.

Application of catalyst Cu-t-ZrO2 based on the electronic metal-support interaction in electrocatalytic nitrate reduction

A novel Cu-t-ZrO2 catalyst with enhanced electronic metal-support interaction (EMSI) is designed for efficient electrocatalytic conversion of nitrate (NO3−) to ammonia (NH3), achieving a remarkable Faradaic efficiency and yield rate of 97.54% and 33.64 mg h−1 mgcat−1, respectively. Electrons are more likely to be transferred from Cu to t-ZrO2 at the electron-rich interface due to the lower work function, which promotes the formation of highly active Cu species and facilitates NO3− adsorption, ensuring selective conversion into NH3.

Strong electronic metal-support interaction of Ni4Mo/N-SrMoO4 promotes alkaline hydrogen electrocatalysis

Ni4Mo electrocatalyst stands out as the promising candidate for hydrogen evolution/oxidation reaction (HER/HOR), yet the intensive hydrogen adsorption leads to sluggish kinetics, decreasing hydrogen catalysis efficiency. Herein, the structure of Ni4Mo nanoparticles anchored on wafer-biscuit-like N-SrMoO4 nanorods (Ni4Mo/N-SrMoO4) is developed to accelerate reaction kinetics by modulating electronic structure. The designed N-SrMoO4 support enables strong electronic metal-support interaction with Ni4Mo, resulting in a downward shift of d-band center and achieving thermally neutral hydrogen adsorption. Ni4Mo/N-SrMoO4 exhibits HER performance with an ultralow overpotential of 15 mV at 10 mA cm−2, superior to Pt/C (η10=18 mV). The outstanding exchange current density of 10.2 mA cm−2 for HOR is three times higher than that of Pt/C (3.5 mA cm−2). Ni4Mo/N-SrMoO4 is further assembled in anion exchange membrane water electrolyzer (AEMWE), resulting in a current density of 100 mA cm−2 at voltage of 1.71 V and the excellent stability of 300 hours. Theoretical calculations and in-situ spectroscopy indicate that the introduction of Sr in N-SrMoO4 effectively enhances electronic metal-support interaction, facilitates the enrichment of adsorbed hydroxyl (OHads) on active sites and weakens hydrogen adsorption on Ni4Mo, thereby accelerating reaction kinetics of hydrogen electrocatalysis.

Strong Electronic Metal-Support Interactions Enable the Increased Spin State of Co-N4 Active Sites and Performance for Acidic Oxygen Reduction Reaction.

Nonprecious metal catalysts, particularly M-N-C catalysts, are widely recognized as promising contenders for the oxygen reduction reaction (ORR). However, a notable performance gap persists between M-N-C catalysts and Pt-based catalysts under acidic conditions. In this study, hybrid catalysts comprising single Co atoms and ultralow concentrations of Pt3Co intermetallic nanoparticles (NPs) are introduced to enhance ORR performance. Under acidic conditions, these hybrid catalysts demonstrate ORR efficiency with a half-wave potential of 0.895 V, negligible decay even after 80 000 cycles, and a high maximum power density of 1.34 W cm-2 in fuel cells. This performance surpasses those of Co-N-C and Pt/Co-N-C catalysts. Both experimental findings and theoretical computations suggest that the heightened ORR activity stems from an increase in the spin density of Co sites induced by noble metal NPs, facilitating the activation of O-O bonds via side-on overlapping and enabling a transition in the reaction pathway from associative to dissociative processes. This research offers a promising avenue for the systematic design of M-N-C cathodes with an enhanced performance for acidic fuel cells.

Selective hydrogenation of acetylene over Pd/β-Mo2C catalyst: Experimental and theoretical studies

Molybdenum carbide is a promising support to tune the metal reactivity, which originates from the interaction between metal and support. In this work, Pd/β-Mo2C was prepared using a deposition-precipitation method for selective hydrogenation of acetylene. The high temperature calcination is employed to modulate the interaction between Pd and β-Mo2C. The Pd/β-Mo2C catalyst calcined at 600 °C exhibits significant promotion in selective hydrogenation, which shows 100 % acetylene conversion and 81.4 % ethylene selectivity at 160 °C. The activity promotion originates from the enhanced electronic metal-support interaction, which induces a shift of Pd 3d to higher binding energy. Besides, the Pd species become atomically dispersed after calcination. The changes in geometric and electronic structure suppress the formation of Pd hydrides, which consequently inhibits the excessive hydrogenation capacity of Pd. The structure variation also affects the adsorption of ethylene. No strong adsorbed ethylene (di-σ bonded ethylene) can be identified, which is conducive to the improvement of ethylene selectivity. Density functional theoretical (DFT) calculations confirm that Pd on β-Mo2C is positively charged. The desorption energy of C2H4* (0.78 eV) is significantly lower than that of further hydrogenation (1.45 eV), which explains the improved ethylene selectivity of the calcinated catalyst. The present study indicates calcination is an effective method to tune the activity of Pd/β-Mo2C for reactions beyond selective hydrogenation of acetylene.

Constructing ultralow-loading Cu single atoms/Fe2O3 particles on Nb2C MXenes for efficient utilization of atomic H to boost electrochemical debromination

Bromate is a commonly identified carcinogenic and genotoxic disinfection byproduct in water. Electrochemical debromination is an environmentally friendly and effective approach but it often suffers the limited reducing atomic H (H*) ability and high metal catalyst dosage. In this study, a unique composite catalyst comprised of ultra-low loading Cu single atoms (0.016 wt%) and Fe2O3 nanoparticles supported on a Nb2C MXene (denoted as Cu0.2/Fe0.1/Nb2C) was synthesized by one-step high-temperature molten salt method. The Cu0.2/Fe0.1/Nb2C significantly outperformed the Nb2C, Cu0.2/Nb2C and Fe0.1/Nb2C counterparts in the electrochemical debromination with a 94.2 % removal efficiency of bromate. It is revealed that the introducing of Cu single atoms, efficiently promotes the adsorption of H* and inhibition of competitive H2 evolution. The incorporation of Fe2O3 nanoparticles significantly increased the electronic metal-support interaction effect between the metal components and Nb2C, thereby forming a noticeable electronic cloud bridge to facilitate efficient charge transfer. Ultimately, the synergistic interplay between Cu single atoms and Fe2O3 nanoparticles plays a crucial role in achieving the remarkable removal performance of bromate. This work not only presents a significant instance of a synergistic catalyst involving metal single atoms and metal nanoparticles for effective electrochemical debromination but also advances the understanding of the electronic metal-support interaction.

Support work-function dependent Fenton-like catalytic activity of Co single atoms for selective cobalt(IV)=O generation

In Fenton-like reactions, high-valent cobalt-oxo (CoIV=O) has attracted increasing interests due to high redox potential, long lifetime, and anti-interference properties, but its generation is hindered by the electron repulsion between the electron rich oxo- and cobalt centers. Here, we demonstrate CoIV=O generation from peroxymonosulfate (PMS) activation over cobalt single-atom catalysts (Co-SACs) using in-situ Co K-edge X-ray absorption spectra, and discern that CoIV=O generation is dependent on the support work-function (WF) due to the strong electronic metal-support interaction (EMSI). Supports with a high WF value like anatase-TiO2 facilitate the binding of PMS-terminal oxo-ligand to Co sites by extracting Co-d electrons, thus decreasing the generation barrier for the critical intermediate (Co-OOSO32−). The Co atoms anchored on anatase-TiO2 (Co-TiO2) exhibited enhanced CoIV=O generation and superior activity for sulfamethoxazole (SMX) degradation during PMS activation. The normalized steady-state concentration of CoIV=O in Co-TiO2/PMS system was three orders of magnitude higher than that of free radicals, and 1.3- to 11-fold higher than that generated in other Co-SACs/PMS systems. Co-TiO2/PMS sustained efficient removal of SMX with minimal Co2+ leaching under continuous flow operation, suggesting its attractive water purification potential. Overall, these results underscore the significance of support selection for enhanced generation of high-valent metal-oxo species and efficient PMS activation in supported metal SACs.

Sustainable catalytic pathways for biofuel precursors: quantitative conversion of glucose to gluconic acid using Pt-Zn biochar catalyst

Achieving quantitative conversion of biomass-derived feedstocks under ambient environmental conditions (20°C, atmospheric air, 0.1 MPa) is a critical milestone for sustainability in chemical processes. Herein, the quantitative conversion of glucose to gluconic acid was accomplished under ambient environmental conditions without any additives using a Pt-Zn intermetallic nanoparticle-supported biochar catalyst prepared from raw rice straw (Pt-Zn/strawC) via a straightforward one-pot solvothermal reaction with ethylene glycol solvent. Spectroscopic analyses verified the formation of the Pt-Zn intermetallic alloy and confirmed strong electronic metal-support interactions. The Pt-Zn/strawC catalyst (Pt:Zn molar ratio of 1:6) was highly selective for the conversion of glucose to gluconic acid, whereas yields as high as 99.9% (98.9% gluconic acid, 1.0% glucaric acid) were reached at 20 oC under base-free and additive-free conditions. Isotope measurements and density functional theory revealed synergistic interactions in the Pt-Zn alloy, wherein the alloy tended to absorb glucose and active O2 into superoxide radical (O2·). This work demonstrates a chemocatalytic method that is practical for environmental conditions and provides a new avenue for sustainable conversion of lignocellulosic biomass to chemical products.

Rational design of Co sub-nano clusters by electronic metal-support interaction for inducing Li2O2 growth

The cathodic electrocatalyst for Li-O2 battery with rich and effective active sites was significant to optimize the formation and decomposition of Li2O2, improve the discharge-charge kinetics. Herein, we develop a novel strategy to controllably prepare sub-nano clusters modified carbon materials. The sub-nano cluster of Co was anchored on the Ketjen Black (KB) substrate and achieved electrocatalytic performance promotion via rational design of the electronic metal-support interaction (EMSI), where the numerous sites in KB with large specific area and geometric space were activated. The experimental and theoretical results indicated that the substrate of the carbon plane could be strongly coupled with the metal atoms and optimized the electronic structure of carbon, leading to effective tuning for Li2O2 growth. The composite exhibited superior performance with high specific capacity of 15311 mAh g−1, low overpotential of 0.88 V and long-term durability of more than 140 cycles with 1000 mAh g−1, strongly related with the optimized Li2O2 growth and decomposition in battery operation. It provides a new strategy for novel electrocatalyst design to tuning the Li2O2 related process.

Modulating dual-active sites within one ruthenium nanocluster by engineering electronic metal-support interactions for efficient hydrogen electro-oxidation

Designing non-Pt metal electrocatalysts for alkaline hydrogen oxidation reaction (HOR) is highly desirable to address the unsustainable use of high-cost and scarce Pt. Although challenging, this study introduces an ultrasmall Ruthenium nanoclusters (Ru NCs)-based electrocatalyst with dual active sites for efficient alkaline HOR. While the selection of Ru is based on its cost-effectiveness, smaller atomic number, and comparable physicochemical properties to Pt, the employment of Mo2C as the support is mainly for establishing strong electronic metal-support interaction (EMSI) within the catalyst. This EMSI effect facilitates significant charge redistribution and the formation of efficient dual-active sites within a single Ru NC. Experiments and simulations confirm that the EMSI effect modulates the d-band centers of the Ru NCs at both H-adsorption and OH-adsorption sites, endowing the Ru/Mo2C catalyst with up to 16.6 times and 29.7 times higher mass activity than commercial Pt/C and Ru/C, respectively, as well as enhanced long-term stability and CO resistance. This work provides a paradigm in designing non-Pt metal NCs for alkaline HOR electrocatalysis, underscoring the significance of adjusting the EMSI effect for performance escalation of HOR catalysis.

Edge-Rich Pt-O-Ce Sites in CeO2 Supported Patchy Atomic-Layer Pt Enable a Non-CO Pathway for Efficient Methanol Oxidation.

Rational design of efficient methanol oxidation reaction (MOR) catalyst that undergo non-CO pathway is essential to resolve the long-standing poisoning issue. However, it remains a huge challenge due to the rather difficulty in maximizing the non-CO pathway by the selective coupling between the key *CHO and *OH intermediates. Here, we report a high-performance electrocatalyst of patchy atomic-layer Pt epitaxial growth on CeO2 nanocube (Pt ALs/CeO2) with maximum electronic metal-support interaction for enhancing the coupling selectively. The small-size monolayer material achieves an optimal geometrical distance between edge Pt-O-Ce sites and *OH absorbed on CeO2, which well restrains the dehydrogenation of *CHO, resulting in the non-CO pathway. Meanwhile, the *CHO/*CO intermediate generated at inner Pt-O-Ce sites can migrate to edge, inducing the subsequent coupling reaction, thus avoiding poisoning while promoting reaction efficiency. Consequently, Pt ALs/CeO2 exhibits exceptionally catalytic stability with negligible degradation even under 1000 s pure CO poisoning operation and high mass activity (14.87 A/mgPt), enabling it one of the best-performing alkali-stable MOR catalysts.

Dewetted Nanoparticles – a Platform to Study Nanoscale Effects in Electrocatalysis

To obtain interpretable electrochemical responses and define design criteria for electrocatalysts with enhanced performance, it is crucial to minimize the chemical and material complexity of electrodes [1]. Wet chemical methods are often applied in research to produce high surface area electrocatalysts, typically in the form of inks and coatings, including additives, binders, ionomers, etc., hence featuring complex, often unknown, structure, morphology, and chemical composition. This complexity might also lead to undesired mass transfer limitations and make it difficult to assess intrinsic catalytic properties of electrocatalysts.This contribution is on designing and nanostructuring binder- and ionomer-free electrodes by solid-state dewetting [2,3], i.e., the heat-induced agglomeration of sputtered thin metal films into nanoparticles (NPs) with tunable loading, size, structure, and composition.In this context, I discuss the following aspects: i) How dewetting can be steered to produce model, spatially separated and coherently oriented metal NPs with defined exposed facets [4]; ii) The use of dewetted electrodes to study nanoscale effects such as electronic metal support interactions (EMSI) in electrocatalytic reactions [5]; and iii) possibilities to apply scanning electrochemical techniques, in-situ spectroscopic tools or single-particle probes to investigate surface and interfacial phenomena of dewetted NP electrocatalysts.[1] A.R. Akbashev, ACS Catal. 2022, 12, 8, 4296.[2] C.V. Thompson, Annu. Rev. Mater. Res. 2012, 42, 399.[3] Altomare et al., Chem. Sci. 2016, 7, 6865.[4] Sharma et al., ECS 2023 https://ecs.confex.com/ecs/244/meetingapp.cgi/Paper/180073[5] Harsha et al., ECS 2023 https://ecs.confex.com/ecs/244/meetingapp.cgi/Paper/179874

Oxygen Vacancy Enabled Electronic Structure Engineering of Pt-WO3 Nanosheets toward Highly Efficient BTEX Sensing.

A Pt nanoparticle-immobilized WO3 material is a promising candidate for catalytic reactions, and the surface and electronic structure can strongly affect the performance. However, the effect of the intrinsic oxygen vacancy of WO3 on the d-band structure of Pt and the synergistic effect of Pt and the WO3 matrix on reaction performance are still ambiguous, which greatly hinders the design of advanced materials. Herein, Pt-decorated WO3 nanosheets with different electronic metal-support interactions are successfully prepared by finely tuning the oxygen vacancy structure of WO3 nanosheets. Notably, Pt-modified WO3 nanosheets annealed at 400 °C exhibit excellent benzene series (BTEX) sensing performance (S = 377.33, 365.21, 348.45, and 319.23 for 50 ppm ethylbenzene, benzene, toluene, and xylene, respectively, at 140 °C), fast response and recovery dynamics (10/7 s), excellent reliability (σ = 0.14), and sensing stability (φ = 0.08%). Detailed structural characterization and DFT results reveal that interfacial Ptδ+-Ov-W5+ sites are recognized as the active sites, and the oxygen vacancies of the WO3 matrix can significantly affect the d-band structure of Pt nanoparticles. Notably, Pt/WO3-400 with improved surface oxygen mobility and medium electronic metal-support interaction facilitates the activation and desorption of BTEX, which contributes to the highly efficient BTEX sensing performance. Our work provides a new insight for the design of high-performance surface reaction materials for advanced applications.