Management Of Electronic Equipment Research Articles

Extended producer responsibility in e‐waste recycling: A secure path to a sustainable future for UAE

AbstractThe effective waste management of electrical and electronic equipment gains increasing importance in the modern world. This issue is particularly relevant for the countries of the Middle East region, including the United Arab Emirates (UAE). According to the research objectives, this study employs the method of political and legal analysis. The paper investigates the features of legal regulation and implementation of Extended Producer Responsibility (EPR) policies in the waste management of electrical and electronic equipment (WEEE) in the UAE. At the same time, the study aims to analyze the current environmental protection policy and assess the prospects for its development. The research also determines the development directions for the profile environmental policy regarding general priorities in the field of economic development of the country. The results of the study indicate that the country's current policy and legislative regulation in the implementation of EPR are complex and meet modern challenges.

Design of CuS composite carbon-based Ni Al-LDH multifunctional phase change composite with electromagnetic shielding performance and heat storage capacity

CuS-based composites are widely used in the fields related to photothermal energy storage and electromagnetic shielding and are excellent candidates for composites with phase change materials. To meet the requirements of micro-integration and electromagnetic resistance of electronic products and optimize the thermal management of electronic products, it is necessary to prepare new flexible composite phase change materials. In this paper, through the design of MPC@Ni Al-LDH/CuS double-layer structure, two-step vacuum filtration method is used, and the highly conductive materials CuS and MPC are introduced into the manufacture of PCM films. With the help of Ni Al-LDH, flame retardancy is introduced. The electromagnetic wave absorption performance is enhanced, and the existence of nano-cellulose (CNF) makes the film have excellent mechanical properties. Ni Al-LDH/MPC and CuS substrates with stable and high mechanical properties are prepared by ultrasonic treatment. According to scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC) and thermogravimetry (TG) characterizations, PEG successfully entered the MPC/CuS skeleton by vacuum filtration, and flexible phase change composite bilayers (MLPC) were obtained. Due to the synergistic effect of structure and components, the obtained composite film has many different excellent functions. Specifically, when MPC@Ni Al-LDH is 15 wt%, the phase transition enthalpy, thermal conductivity, electromagnetic shielding, and electrical conductivity are 146.8 J/g, 1.07 W/m·K, 38.8 dB and 126.4 S/m, respectively. The 3600 s infrared temperature measurement results show that the sample has stable thermal properties. Due to the presence of CuS, when MPC@Ni Al-LDH is 5 wt%, its absorbance can be kept at 1.51 L/(g·cm), and its photothermal conversion efficiency can reach 90.6 %. The MPC/CuS structure in the composite film provides many heat transfer channels, which reduces the phonon scattering in the heat transfer process and significantly increases thermal conductivity. Therefore, this multifunctional flexible phase change film can be used in photothermal conversion devices and for thermal management of electronic equipment, and it has broad application prospects in wearable equipment design due to its excellent electromagnetic shielding ability and infrared thermal stealth ability.

Application of IoT technology for enhancing the consumer willingness to return E-waste for achieving circular economy: A Lagrangian relaxation approach

Poor management of waste electronic and electrical equipment (e-waste) has resulted in serious challenges to the environment and, consequently, to living organisms. Increasing consumer willingness to return household e-waste is a practical solution for better e-waste management. In this paper, for the first time, a circular supply chain network is structured by applying internet of things (IoT) technology to increase consumer willingness to return household e-waste and to manage the network more effectively. For this purpose, we formulate a mixed-integer linear programming model whose objective is to minimize strategic costs (setup costs and IoT deployment costs) and operational costs (transportation costs, costs associated with IoT, and processing costs in centers), simultaneously. In addition, we developed a heuristic algorithm based on Lagrangian relaxation to solve the proposed MILP model. The performance of the proposed algorithm is evaluated by comparing its results with GAMS results using eight small-sized simulated problems. Furthermore, eight large-size problems are simulated and solved by the proposed algorithm. Finally, the data of an Iranian knowledge-based company is employed to validate the presented mathematical model and algorithm, and the sensitivity analysis process is used to examine the accuracy of the obtained results.

Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Porous carbon network-based phase change composites have been widely used in energy storage and thermal management related fields. At present, the demand of energy crisis for photothermal energy storage and the prevention and management of thermal abuse of electronic equipment constantly promote the development of carbon-based composite phase change materials (PCMs). Therefore, a series of new composite materials filled with PCMs and polyethylene glycol (PEG) and added with flame-retardant magnesium hydroxide were developed, which makes the composites show certain flame-retardant ability in high-temperature environments. The results show that the thermal conductivity increases from 0.25 to 0.94 W/m·K, and the latent heat of phase change remains at 142.7 J/g. In addition, due to the capillary effect caused by the synergistic effect of multi-pore carbon (MPC) structure and cellulose macromolecular chain, the composite material has good shape stability, which effectively prevents the leakage behavior of PCMs during solid-liquid phase change. Moreover, the absorbance of the composite material can reach 1.28 L/(g cm) in the ultraviolet–visible light range of 200 nm–800 nm, and its photothermal conversion efficiency can reach 90.8 %. Therefore, this material has a broad application prospect in the thermal management of electronic equipment and photothermal energy storage devices.

A graphene nanoflake-based flexible composite phase change material for enhanced heat dissipation in chip cooling

Efficient heat dissipation is a key requirement for stable performance retention and failure prevention of microelectronic components. In practical applications, the interface thermal resistance between the component and the heat dissipation unit affects the heat dissipation effect. Thermal interface materials (TIM) are used to fill the voids at the solid interface between the device and the heat sink to create a thermally conductive path for heat dissipation. Phase change materials (PCMs) are candidates as TIM for next-generation electronic devices due to their excellent latent heat storage. However, some inherent problems of PCMs, such as low thermal conductivity, high solid-state rigidity, and easy leakage, also limit their application in the thermal management of electronic equipment. This study prepared a biomass cotton cloth substrate with a woven structure attached to graphite nanosheets and further constructed a thermally conductive matrix through drying or high-temperature carbonization. Through the composite of thermally conductive matrix and paraffin wax (PW), a flexible phase change thermal interface composite material was obtained. The phase change enthalpy of composite materials is as high as 157.7 J/g. The thermal conductivity of the composite material is 293.7 % higher than that of pure PW. On its excellent flexibility and structural strength, the composite material can better adapt to the thermal interface, reduce contact thermal resistance, and thus achieve good leakage resistance. The flexible phase-change TIM developed in this study have broad application prospects in the fields of chip heat dissipation and thermal management of wearable electronic devices.

Integrated Face Recognition and IoT-Based Electronic Equipment Management System

This research explores the development of an Integrated Face Recognition and IoT-Based Electronic Equipment Management System, aiming to enhance security and efficiency in equipment lending processes. Utilizing face recognition technology integrated with IoT, the system is designed to automate and secure the return of borrowed electronic equipment. The methodology includes a detailed study of existing management practices, development of a prototype system, and analysis of its effectiveness in a real-world setting. Results indicate a significant improvement in the management and security of equipment lending. The system demonstrates potential for broader application in similar contexts.

Preparation and performance evaluation of graphene-based waterborne thermal conductive coatings

Thermal management of electronic products and communication equipment is a key bottleneck restricting the integration of products, and high-performance thermal management materials are an effective means to solve this problem. In this study, graphene prepared by liquid phase exfoliation was used as a functional additive material to successfully prepare a graphene high-thermal-conductivity coating material on stainless steel substrates for enhanced cooling performance. The research found that the thermal conductivity of different coating materials with different graphene contents significantly varies, and when the graphene content is 15 %, the thermal conductivity can reach as high as 9.499 W/(m·K), which can rapidly achieve heat dissipation. Considering the actual working conditions of the thermal coating, the comprehensive performance of the coating was tested, and it has excellent corrosion resistance and excellent temperature cycling resistance. Under experimental conditions, after adding the thermal coating to the stainless steel substrate, its cooling effect significantly improved. Compared with uncoated blank samples, the maximum temperature difference during heat transfer under room temperature can reach 11 °C, and the maximum temperature difference under −80 °C can reach 19 °C. This study's coating has potential application prospects in the field of thermal management.

ЦИФРОВІ РІШЕННЯ В УПРАВЛІННІ ЕЛЕКТРОННИМИ ВІДХОДАМИ

The article is devoted to the actual problem of substantiating directions for the use of innovative digital solutions in the management of waste electrical and electronic equipment. The structure of e-waste in developed countries in 2022, which includes IT and telecommunications devices, consumer devices and solar panels, power tools and medical devices, was analyzed and it was found that the largest share is household large-sized appliances (52.7%). Analysis of the dynamics of electronic waste generation per capita in industrialized countries in 2013–2022 showed that in 2022, each resident of Australia – 22.42 kg, Canada – 20.58 kg, Israel – 14.56 kg of electronic waste was generated, Japan – 20.55 kg, Korea – 16.80 kg, Great Britain – 24.63 kg, USA – 21.50 kg, EU – 28.54 kg. Considered the practice of waste management in industrially developed countries. For example, Japan (18–25%) is most actively involved in the processing of electronic waste. The EU has developed a strategy - an action plan for the closed cycle economy, in which the reduction of electrical and electronic waste is a key priority, and a number of proposals have been submitted to promote the repair of goods. The well-founded role of digitalization in the management of electronic waste, which consists in increasing the speed of waste processing and increasing its economic efficiency. The areas of use of innovative digital solutions in electronic waste management are defined, such as: robotics, artificial intelligence and neural networks, the Internet of Things, cloud solutions and data analytics. The advantages of digitization in waste management are disclosed, which includes: automation in waste disposal; improvement of the recycling process; ensuring waste minimization and saving natural resources; creating opportunities to identify problem areas and assess the efficiency of electronic waste disposal; helps to save money, energy and time for waste collection and disposal. The directions for handling electrical and electronic equipment waste have been defined, which consist in preventing the generation of waste, its collection, separation, processing, extraction of secondary raw materials through reuse, recycling and other forms of recovery, which will contribute to the realization of the goals of sustainable production and consumption and the improvement of environmental indicators.

The role of BRICS metropolises in the management of Waste Electrical and Electronic Equipment

The role of BRICS metropolises in the management of Waste Electrical and Electronic Equipment

Towards Sustainable WEEE Management:Challenges, Insights and a Strategic Framework

Waste Electrical and Electronic Equipment (WEEE) management presents profound environmental challenges worldwide. In locales like Huila, Colombia, devising effective strategies is paramount for fostering sustainable trajectories. This investigation aims to identify the salient elements essential for developing a proficient approach to WEEE management in this region. Employing a predominantly qualitative mixed-methods approach, the study intertwines inductive, deductive, and abductive rationales, applying an interpretative perspective. Our sample encompassed 72 stakeholders active in WEEE management, extending from urban households to WEEE-focused businesses and environmental entities. Comprehensive questionnaires gathered data on socio-demographics, WEEE awareness, comprehension of relevant regulations, and associated practices. An exhaustive descriptive statistical analysis examined each variable's behavior, supplemented by visual representations and pivotal statistical parameters. These findings were further augmented by a SWOT analysis. Results emphasize the cardinal challenges in sculpting a strategic WEEE management pathway, yielding insights indispensable for policymakers intent on refining WEEE procedures. Moreover, the investigation introduces a methodical framework for secure, effective electronic waste handling, transportation, precious metal extraction, and disposal. Fundamentally, this research enriches the discourse on WEEE management, proffering pragmatic solutions with extensive ramifications. Received: 15 August 2023 / Accepted: 21 October 2023 / Published: 5 November 2023

A review of various strategies in e-waste management in line with circular economics.

Waste management of electrical and electronic equipment has become a key challenge for electronics manufacturers due to globalization and the rapid expansion of information technology. As the volume of e-waste grows, legal departments lack the infrastructure, technology, and ability to collect and manage it environmentally soundly. Government laws, economic reasons, and social issues are important considerations in e-waste management. The circular economy concept is built on reusing and recycling goods and resources. A novel idea called the circular economy might prevent the negative consequences brought on by the exploitation and processing of natural resources while also having good effects such as lowering the demand for raw materials, cutting down on the use of fundamental resources, and creating jobs. To demonstrate the significance of policy implementation, the necessity for technology, and the need for societal awareness to build a sustainable and circular economy, the study intends to showcase international best practices in e-waste management. This study uses circular economy participatory implementation methods to provide a variety of possible approaches to assist decision-makers in e-waste management. The purpose of this article is to review the most accepted methods for e-waste management to emphasize the importance of implementing policies, technology requirements, and social awareness in creating a circular economy. To conclude, this paper highlights the necessity of a common legal framework, reform of the informal sector, the responsibility of different stakeholders, and entrepreneurial perspectives.

Enhanced interface heat transfer based on gallium-based liquid metal infiltrated into vertically aligned copper nanowire arrays

Owing to the high aspect ratio and thermal conductivity, copper nanowires have great potential as novel thermal conductivity fillers. However, the thermal conductivity of thermal interface materials (TIMs) prepared by copper nanowires with polymer matrices is low. In contrast, gallium-based liquid metal has a higher thermal conductivity than polymer, while it is difficult to wet copper nanowires with liquid metal to prepare the TIMs. In this study, TIMs with a thickness of 53 µm were prepared by forming a galvanic cell between gallium-based liquid metal and vertically aligned copper nanowire arrays to improve wettability, and the heat transfer performance of the TIMs was experimentally investigated. The results show that the total thermal contact resistance of the composite thermal interface material is as low as 3.20 ± 0.24 mm2K/W. Compared with commercial thermal grease, the total thermal contact resistance is reduced by 86.30 %. The total thermal contact resistance increases with the surface roughness as the actual contact area decreases. In HCl/CuSO4 solution, the wettability of gallium-based liquid metal on the surface of vertically aligned copper nanowire arrays was improved, and the contact angle was 10.1 ± 0.9°. Furthermore, after 360 h of ageing, the total thermal contact resistance of the sample increased by 0.57 mm2K/W. This study provides new directions for designing high-performance TIMs with excellent overall heat transfer properties for the thermal management of electronic equipment.

Characterization and Assessment of Household Waste from Electrical and Electronic Devices (WEEE) in Chile. A Proposal Towards a More Eco-Efficient Product Design

The aim of this study is to propose a protocol for incorporating procedures to evaluate, characterize and establish general parameters applicable to the management of Waste Electrical and Electronic Equipment (WEEE). This protocol can be applied within the framework of common product design and development processes. The proposed protocol provides key information for design projects, with emphasis on the potential future recovery of parts, components and raw materials.To achieve this objective, this article first addresses the general problem and defines the objectives, focusing on Chile as a valid case study in Latin America. The method used was applied to ten small household appliances, yielding promising results. Additionally, a user-friendly and easily applicable method is proposed, suitable for training new designers and working with small companies and relevant stakeholders in recycling and recovery processes. In conclusion, this study contributes relevant results aimed at promoting projects of technological and economic interest, with a focus on the sustainable management of waste at the end of its lifespan.

Environmental and Social Life Cycle Assessment of Waste Electrical and Electronic Equipment Management in Italy According to EU Directives

The current Waste Electrical and Electronic Equipment (WEEE) management system of the European Union to be applied in all member states was introduced in 2002 by the first WEEE directive (2002/96/EC). Since the beginning, the system was intended to improve the management of WEEE and promote circular economy principles in the sector. This study aims at evaluating the environmental and social impacts of the WEEE management system in Italy, with a special focus on collection and recycling in Campania Region (the third more populated Italian Region, Southern Italy). The Life Cycle Assessment (LCA) is jointly applied with the Social Life Cycle Assessment (S-LCA). All five categories of WEEE (R1 to R5) are considered in the assessment. The LCA results show that the extraction of metals and materials from 1 tonne of WEEE collection and recycling generates much lower environmental impacts than the extraction and refining of an equivalent amount of virgin resources. In particular, the results of the environmental LCA highlight that the treatment of 1 tonne of WEEE collected in the Campania Region provides the opportunity to recover several metals such as Aluminum, Iron, Steel and ferrous materials, Copper, Nickel, Lead, and precious metals (Gold, Silver, and Palladium). According to S-LCA, the collection and recycling of 1 tonne of WEEE provides positive impacts to the investigated sub-categories of recipients (i.e., local community and society), except in some cases where the collection may potentially generate negative impacts, expressed by a lower “safe and healthy living conditions” indicator in the local community sub-category. In particular, much more must be done to support small Municipalities towards better collection procedures and integration within the largest Regional and national WEEE valorization networks. Solutions are suggested to improve the transition of the WEEE management system towards a more just environmental and social circular economy model.

Circular Economy Management of Waste Electrical and Electronic Equipment (WEEE) in Italian Urban Systems: Comparison and Perspectives

This study evaluates the current collection and recycling of Waste Electrical and Electronic Equipment (WEEE) in Italy by means of the analysis of national and regional data from EUROSTAT and the Italian WEEE Coordination Centre database, as well as through qualitative interviews with key stakeholders of the WEEE management system of the Campania region (Southern Italy). Urban systems, among which the metropolitan city of Naples in the Campania region, are the main users of Electrical and Electronic Equipment (EEE) and, as a consequence, the main generators of WEEE, which must be managed and recovered properly in order to prevent the loss of valuable resources and the associated environmental impacts. In addition to analysing the current state of WEEE collection and recycling in Italy and its regions and urban systems, the study aims to improve our understanding of the WEEE reverse supply chain and the main barriers and drivers to collection and recycling. The results reveal that the main barriers to the collection/delivery/recycling of WEEE resulted in the low awareness of the citizens about the importance of WEEE recovery, the lack of trust towards administrators, the lack of certified first treatment plants, the aversion of the citizens to the opening of new plants due to past inefficient solutions in solid waste management, the exploitation of high value materials only (so-called “cannibalization”, the illegal trade of WEEE, the influence of the market on the valorization of secondary materials), and, finally, the dominance of economic efficiency over the proximity advantage for the disposal of solid waste. On the other hand, the main drivers for collection emerged to be the adoption of education programmes in schools and constant communication campaigns directed to citizens in order to improve WEEE collection and recycling behaviour; the adoption of economic and non-economic incentives; the availability of municipal collection points (ecological islands) and other collection centres characterised by easy access by citizens for the delivery of their WEEE.

Closed-loop supply network of electrical and electronic equipment under carbon tax policy.

Waste electrical and electronic equipment is one of the essential pollutants with significant negative impacts on the environment and human health. In this study, a multi-period mixed-integer linear programming model is developed to design a closed loop supply network for the management of electrical and electronic equipment by explicitly considering the economic and environmental sustainability with a budget constraint. Different recycling options like refurbishing, disassembling, remanufacturing, and disposal centers are considered in the design of the network. The model minimizes the total costs of the network and the total carbon emission tax. The literature review shows that the introduced model is more comprehensive than the other existing models because it simultaneously determines the location of facilities, the capacity of facilities, type of manufacturing technologies, variety of vehicles, and the allocation and transportation of materials and products. The model was applied to a real-life case study in Iran and could provide a profit of IRR 245,509,165M during the planning periods. The carbon tax policy with different echelons is applied to control the environmental impacts in which the carbon tax increases as carbon emissions increase. The results show a nearly linear relationship between the total costs of the network and the carbon tax. The carbon tax of equal to or more than 10,800 IRR/t CO2 can be a deterrent factor for the electrical and electronic equipment manufacturer in Iran to diminish emissions through investment in green technologies.

Dynamic IGBT Three-Dimensional Thermal Network Model Considering Base Solder Degradation and Thermal Coupling Between IGBT Chips

With the development of power electronic technology, the thermal characteristics of high-power insulated gate bipolar transistor (IGBT) module are vital information for thermal management of power electronic equipment, reliability analysis, and thermal design of power electronic system. However, the present commonly used lumped thermal network model based on thermal resistance and heat capacity still has some limitations in accurately predicting the junction temperature of IGBT modules, significantly once considering the degradation of base solder in high-power IGBT modules. In this paper, the thermal behavior of high-power IGBT chips under different base solder degradation is studied by the finite element method (FEM). The results show that the degradation of the base solder has effects on the thermal impedance between the junction and the case, which should be fastidiously thought about within the thermal network model modeling. As a result, a dynamic three-dimensional thermal network model that takes into account the thermal interaction between IGBT chips, as well as the degradation of the base solder, is proposed in this paper. The proposed thermal network model can estimate the junction temperature of a high-power IGBT module correctly and fast based on the real degradation of the base solder. Finally, finite element simulation and experimental findings are used to validate the proposed dynamic three-dimensional thermal network model. The results show that the dynamic three-dimensional thermal network model has comparable accuracy to finite element simulation and test results. At the same time, the dynamic three-dimensional thermal network model responds faster than the finite element simulation.

Analysis of the thermal management of electronic equipment byemploying silicon carbide nano-pcm-based heat sink.

Electrical and electronic equipment like light bulbs, computing systems, gaming systems, DVD players, and drones experiences heat generation during extensive use. The heat energy should be liberated to ensure uninterrupted performance and prevent premature failure of the devices. This study uses an experimental setup of the heat sink, phase change material, silicon carbide nanoparticles, thermocouple, and data acquisition system to control heat generation and increase heat lost to the surroundings in electronic equipment. The silicon carbide nanoparticles are mixed in varying compositions, i.e., 1wt.%, 2wt.%, and 3wt.%, in paraffin wax as the phase change material. The influence of the heat input (15W, 20W, 35W, and 45W) through the plate heater is also studied. The operating temperature of the heat sink was allowed to fluctuate between 45 and 60°C while experimenting. The fluctuation in the temperature of the heat sink was recorded to monitor and compare the charging, dwell, and discharging periods in the heat sink. It is observed that increasing the percentage composition of silicon carbide nanoparticles in the paraffin wax resulted in increasing the peak temperature and the dwell period of the heat sink. Increasing the heat input above 15W benefited in controlling the duration of the thermal cycle. It is inferred that high heat input is beneficial in enhancing the heating period, while the percentage composition of silicon carbide in the PCM benefits by increasing the heat sink's peak temperature and dwell period. It is concluded that high heat input, i.e., 45W, is beneficial in enhancing the heating period, while the percentage composition of silicon carbide in the PCM benefits by increasing the heat sink's peak temperature and dwell period.

Engaging the End User in Waste from Electrical and Electronic Equipment Management: An Action Research Study

Engaging the End User in Waste from Electrical and Electronic Equipment Management: An Action Research Study

Performance Degradation Modeling and Its Prediction Algorithm of an IGBT Gate Oxide Layer Based on a CNN-LSTM Network.

The problem of health status prediction of insulated-gate bipolar transistors (IGBTs) has gained significant attention in the field of health management of power electronic equipment. The performance degradation of the IGBT gate oxide layer is one of the most important failure modes. In view of failure mechanism analysis and the easy implementation of monitoring circuits, this paper selects the gate leakage current of an IGBT as the precursor parameter of gate oxide degradation, and uses time domain characteristic analysis, gray correlation degree, Mahalanobis distance, Kalman filter, and other methods to carry out feature selection and fusion. Finally, it obtains a health indicator, characterizing the degradation of IGBT gate oxide. The degradation prediction model of the IGBT gate oxide layer is constructed by the Convolutional Neural Network and Long Short-Term Memory (CNN-LSTM) Network, which show the highest fitting accuracy compared with Long Short-Term Memory (LSTM), Convolutional Neural Network (CNN), Support Vector Regression (SVR), Gaussian Process Regression (GPR), and CNN-LSTM models in our experiment. The extraction of the health indicator and the construction and verification of the degradation prediction model are carried out on the dataset released by the NASA-Ames Laboratory, and the average absolute error of performance degradation prediction is as low as 0.0216. These results show the feasibility of the gate leakage current as a precursor parameter of IGBT gate oxide layer failure, as well as the accuracy and reliability of the CNN-LSTM prediction model.