Electronic Density Of States Research Articles

Hydrogenation-induced superconductivity in monolayer

Here, we construct a new two-dimensional hydrogenated transition metal dichalcogenide material, the Janus WSH monolayer, which is created by replacing the top-layer S atoms in the 2H-WS2 monolayer with H atoms. Then we use first-principles calculations to investigate its electronic structure, phonon dispersion, and superconductivity. The results show that hydrogenation breaks the reflection symmetry, which helps orbital hybridization and to flatten the electronic bands. Thus, it leads to a high electronic density of states near the Fermi level. Additionally, the electron-phonon coupling is enhanced by the softening of phonon modes from the in-plane vibrations of W. The strong interactions between electrons and phonons result in phonon-mediated superconductivity in Janus WSH monolayer. The calculated critical temperature (T c ) is approximately 23.1 K at atmospheric pressure. This T c is about twice higher than that of existing WS2-based materials.

First-principles study of structural, electronic and magnetic properties of diluted magnetic semiconductor and superlattices based‏ on Cr-doped ZnS and ZnSe compounds in wurtzite-type crystal

We performed first-principle calculations to investigate the structural, electronic, and magnetic properties of ZnS and ZnSe binary compounds, Zn0.5Cr0.5S and Zn0.5Cr0.5Se DMS alloys and (ZnS)2/Zn0.5Cr0.5Se and (ZnSe)2/Zn0.5Cr0.5S superlattices in the wurtzite structure using the full potential linear muffin–tin orbital (FP-LMTO) method. Features such as lattice constant, modulus of compressibility and its first derivative, spin-polarized band structures, total and local or partial electronic densities of states and magnetic properties were calculated. The electronic structure shows that Zn0.5Cr0.5S and Zn0.5Cr0.5Se DMS alloys and (ZnS)2/Zn0.5Cr0.5Se and (ZnSe)2/Zn0.5Cr0.5S superlattices are half-metallic ferromagnetic with 100% complete spin polarization. The total magnetic moments calculated show the same integer value of 4 µB, which confirms the ferromagnetic half-metallic behavior of these compounds. We found that the ferromagnetic state is stabilized by the p-d exchange associated with the double-exchange mechanism. Zn0.5Cr0.5S and Zn0.5Cr0.5Se DMS alloys and (ZnS)2/Zn0.5Cr0.5Se and (ZnSe)2/Zn0.5Cr0.5S superlattices are shown to be promising new candidates for applications in the fields of spintronics.

En route to superhard and 1D conductive carbon allotropes via unusual sp 2–sp 3 bonding configuration

Carbon structures with sp 2–sp 3 hybrid bonds were expected to exhibit both excellent mechanical and electronic properties. Here, we theoretically design several unique carbon structures, which contain unusual sp 2–sp 3 hybrid bonds. We found that the introduction of sp 2 bonding units into carbon structure with sp 3 bonding can tune the electronic densities of state at Fermi level, especially resulting in 1D conductive channels in 3D structures. Further simulations indicate that Vickers hardness of these structures is close to diamond via the increase in sp 3 building blocks. Our current work provides insights into the design of carbon structures with both excellent superhard and remarkably metallic properties.

First-principles study on the effect of pressure on the adsorption of H2O on the Mg-montmorillonite (010) surface

The effect of pressure on H2O adsorption on the montmorillonite surface is a crucial issue in geomechanics and high-pressure physics. In this paper, the effect of pressure on adsorption capability were calculated based on density-functional theory (DFT) for pressures ranging from 0 to 18 GPa, and the adsorption energies and structures of the H2O molecules were analyzed with different surface coverages (0 < Θ ≤ 1.0 ML). Firstly, the clean (010) surface of Mg-montmorillonite was modelled at different pressures from an atomic perspective, then the calculations demonstrated that single H2O molecules were stably adsorbed on the top, bridge, hollow and interlayer bridge sites, independent of pressure. However, the adsorption energies at different sites were significantly influenced by the pressure and showed different trends. For the hollow and bridge sites, the adsorption energy increased within the pressure range 0–2 GPa but decreased within the pressure range 2–18 GPa. Conversely, for the top sites, the adsorption energy decreased with increasing pressure within the range 0–2 GPa but increased with increasing pressure within the range 2–18 GPa. For increasing coverage with H2O molecules, the adsorption energy was almost constant at 0 GPa but decreased within the range 0 < Θ ≤ 1.0 ML at 2, 10, and 18 GPa. Furthermore, the adsorption energies for the bridge sites all increased with increasing coverage but decreased with increasing coverage for the interlayer bridge sites at the four pressures. In addition, other characteristics of the H2O and Mg-montmorillonite (010) surface were discussed, including bonding, changes in the electronic density of states, the charge distribution, and the structure of the atomic interlayer at different pressures.

Unravelling the Flotation Performance of 1-Hydroxy-2-naphthyl hydroxamic Acid and Styrene Phosphonic Acid Collectors on Monazite Using Experiments and DFT Calculations.

The atomic-level structure and electronic properties of monazite were investigated using a first-principles method based on density functional theory (DFT). First, the geometric structure of monazite was optimized, followed by calculations of its Mulliken population, electron density, and density of states, which were subsequently analyzed. The findings of this analysis suggest that monazite is highly susceptible to cleavage along the {100} plane during crushing and grinding. When SPA was utilized as the collector, the recovery rate of monazite was higher than that when LF-P8 was used. The zeta potential and adsorption energy results indicated that the zeta potential after SPA adsorption tended towards negativity, and the adsorption energy was smaller, indicating that SPA exhibited stronger adsorption performance. LF-P8 was stably adsorbed on the monazite (100) surface via mononuclear double coordination. SPA was stably adsorbed on the surface of monazite (100) via binuclear double coordination. The results of this study provide valuable insights into the adsorption of monazite by commonly used flotation collectors. These findings are of substantial importance for future endeavors in designing flotation collectors capable of achieving selective monazite flotation.

Electronic structure and composition of tin oxide thin epitaxial and magnetron layers according to synchrotron XANES studies

The materials of the tin-oxygen system and thin-film structures based on them are modern and actual for the creation of a wide range of electronic devices, for example, resistive gas sensors of high sensitivity and short response time with low energy consumption and high manufacturability. An important direction in the study of such materials and structures is the control of properties with variations in technological formation regimes. Information on the composition, local atomic and electronic structure of thin layers of the tin-oxygen system with varying approaches to their production is in demand. The work is devoted to the study of the electronic structure of thin layers of tin oxides obtained by modern methods of molecular beam epitaxy and magnetron sputtering. A study of the local partial density of electronic states in the conduction band by X-ray absorption near edge structure spectroscopy of tin and oxygen has been carried out. The data were obtained using high-intensity synchrotron radiation, which allows varying the monochromatized radiation quantum energy without loss in intensity, that is necessary to obtain high-resolution X-ray spectral data. It is shown that the composition, local atomic surrounding, electronic spectrum and their features depend on the technology of formation and storage conditions of the studied structures. Synchrotron X-ray spectroscopy data show the presence of intermediate oxides of the tin-oxygen system in the studied materials after prolonged storage in laboratory conditions. The data obtained indicate the possibility of controlled variation in the composition, local atomic surrounding and electronic spectrum of thin-film structures of tin oxides of small thickness. The results of the work can be used in the formation and subsequent modification of thin and ultrathin layers of tin oxides by magnetron sputtering and molecular beam epitaxy, as well as in their further application as active layers of microelectronics devices

Tailoring Interfacial Electric Field by Gold Nanoparticles Enable Electrocatalytic Lithium Polysulfides Conversion for Lithium-Sulfur Batteries.

Although lithium-sulfur batteries (LSBs) are considered as the promising next rechargeable storage system ascribing to their decent specific capacity of inorganic sulfur, the development is partially impeded by inferior electronic conductivity, severe shuttle effect, and large volume variation. To tackle the issues above, a great deal of effort is made on sulfur-containing polymer (SCP) that shows better electrochemical performance. Nevertheless, sluggish conversion of lithium polysulfides (LiPSs) obstructs battery performance yet. Herein, electrocatalytic LiPSs with full conversion by tailoring the interfacial electric field are discovered based on gold nanoparticles (AuNPs) anchored on sulfurized polyaniline (SPANI). A downhill path of Gibbs free energy from organosulfur polymer to intermediate product means more spontaneously and favorable for full conversion, as the significant enhancement of electron density of state in the vicinity of the HOMO level for the AuNPs increase the electron transition probability rate. This composite delivers satisfactory electrochemical performance, especially increased rate capacity of >300 mAh g-1. Furthermore, catalyst mechanism on molecule level is proposed that AuNPsdominate chemical enhancement and higher electron delocalizablility betweenAuNPs and LiPSs molecules. These results can erect a promising strategy for enhancing lithium polysulfides full conversion.

Pressure-induced superconductivity in SnSb2Te4

Owing to their unique compositional and structural characteristics, layered van der Waals solids in binary and ternary chalcogenide families provide a fertile testbed for exploring novel exotic structures and states, e.g., topological insulators and superconductors. Herein, a comprehensive study on the structural variations and correlated electrical transport behavior of SnSb2Te4, a ternary member, has been carried out considering elevated pressures. Under 45.6 GPa, three distinct structural phase transitions have been observed, with strong evidence from the variations of high-pressure X-ray diffraction patterns. The onsets of phase II (monoclinic, C2/m ) at 6.3 GPa, phase III (monoclinic, C2/c ) at 15.5 GPa, and phase IV (body-centered cubic with substitutional disorder, Im-3m ) at 17.2 GPa have been observed owing to the emergence of new diffractions. Based on electrical measurements at low temperature and high pressure conditions, two pressure-induced superconducting states have been distinguished in SnSb2Te4. The first state occurs in the range of 12.3-17.1 GPa. The positive pressure dependence on Tc indicates that the aforementioned state is related to the monoclinic C2/m phase. At &gt; 17.1 GPa, the second superconducting state emerges, with the negative pressure dependence on Tc . It relates to the body-centered cubic solid solution phase, which is characteristic of a substitutional disordered crystal structure. The discovery that the pressure-induced superconductivity in SnSb2Te4 is affected by structural phase transitions under pressure may help understand the universal relationship between the ambient condition topological insulating state and derived superconductivity. Ab initio theoretical calculations reveal that an electronic topological transition takes place at approximately 2.0 GPa, which is featured by the obvious changes in the distribution of electronic density of states near the Fermi level.

Physical origin of enhanced electrical conduction in aluminum-graphene composites

The electronic and transport properties of aluminum-graphene composite materials were investigated using the ab initio plane wave density functional theory. The interfacial structure is reported for several configurations. In some cases, the face-centered aluminum (111) surface relaxes in a nearly ideal registry with graphene, resulting in a remarkably continuous interface structure. The Kubo–Greenwood formula and space-projected conductivity were employed to study electronic conduction in aluminum single- and double-layer graphene-aluminum composite models. The electronic density of states at the Fermi level is enhanced by the graphene for certain aluminum–graphene interfaces, thus improving electronic conductivity. In double-layer graphene composites, conductivity varies non-monotonically with temperature, showing an increase between 300 and 400 K at short aluminum-graphene distances, unlike the consistent decrease in single-layer composites.

Laser-field-mediated Rashba and Dresselhaus spin–orbit control in GaInAs/AlInAs quantum wells

For more possibilities in exploring the spin–orbit (SO) control in two-dimensional (2D) semiconductor quantum wells, we resort to the laser field by constructing a generic model including both the axial and transverse field components relative to the well-growth direction, with the axial one primarily modifying the structural potential of the well and the transverse one mainly altering the electron density of states and so the Hartree potential. For GaInAs/AlInAs quantum wells with two-subband occupation, we obtain the full scenario of the laser-field response of the Rashba and Dresselhaus SO couplings, including both the intrasubband (αν and βν with ν = 1,2 denoting the subband index) and intersubband (η and Γ) types, by solving the Poisson–Schrödinger equations. Remarkably, for the Dresselhaus coupling, which is insensitive to the electrical manipulation, we demonstrate that it can be substantially tuned by the laser field and unified SO control of different subbands is possible, suggesting that the optical manner is an effective supplement to the electrical means. Moreover, symmetric (α1=−α2) and selective (α1=0, α2≠0) control of the Rashba coupling of different subbands are also observed with the interplay of the two laser components, which are desirable for the realization of skyrmion lattice and the suppression of spin relaxation of given subbands. Besides, for the intersubband coupling, the Rashba term η is optically tunable while the Dresselhaus term Γ is basically immune to the laser field, i.e., selective control of the intersubband coupling by virtue of optical means. These diverse laser-field-mediated SO features offer exciting possibilities in incorporating 2D quantum wells for new applications in the field of spintronics.

Earth Mover's Charge Transfer Distance: A General and Robust Approach for Describing Excited State Locality.

A novel approach for assessing the extent of electron displacement in optical transitions is proposed by implementing the Earth Mover's Distance (EMD) method, which quantifies the spatial dissimilarity between ground and excited state electron density distributions. In contrast to previous descriptors, this index provides a representative and intuitively understandable distance under a robust and computationally efficient scheme for all possible forms of locality, even in the most difficult to dissect topological cases. The theoretical differences among the existing indices and our method are first illustrated with the help of a simplified model system, followed by a benchmarking of several partial atomic charge models using experimentally relevant push-pull compounds with diverse symmetries. These same molecules are finally employed to further demonstrate the principal advantages of the EMD index and its capabilities in rationalizing charge transfer phenomena.

Vestigial singlet pairing in a fluctuating magnetic triplet superconductor and its implications for graphene superlattices

Stacking and twisting graphene layers allows to create and control a two-dimensional electron liquid with strong correlations. Experiments indicate that these systems exhibit strong tendencies towards both magnetism and triplet superconductivity. Motivated by this phenomenology, we study a 2D model of fluctuating triplet pairing and spin magnetism. Individually, their respective order parameters, d and N, cannot order at finite temperature. Nonetheless, the model exhibits a variety of vestigial phases, including charge-4e superconductivity and broken time-reversal symmetry. Our main focus is on a phase characterized by finite d ⋅ N, which has the same symmetries as the BCS state, a Meissner effect, and metastable supercurrents, yet rather different spectral properties: most notably, the suppression of the electronic density of states at the Fermi level can resemble that of either a fully gapped or nodal superconductor, depending on parameters. This provides a possible explanation for recent tunneling experiments in the superconducting phase of graphene moiré systems.

The generation of noise-like pulses and various solitons with CuO nanorods as a broadband saturable absorber

Copper oxide (CuO) nanorods exhibit unique photoelectric properties due to their high surface area, excellent volume effect, and quantum confinement effect, which have also attracted wide attention in the application of ultrafast photonics. In the present work, CuO nanorods were successfully prepared by a simple synthesis strategy and characterized in detail. The density of electron states (DOS) and the band structure of CuO were predicted by the first principles simulation method. The nonlinear optical response parameters of CuO nanorods were determined by a twin-balanced detector system. Based on the excellent nonlinear optical response, CuO nanorods were exploited as saturable absorbers (SAs) to achieve the noise-like pulse (NLP) mode-locking operation in the erbium (Er)-doped fiber laser (EDFL) at 1552 nm and ytterbium (Yb)-doped fiber laser (YDFL) at 1038.5 nm. Additionally, by shortening the cavity length of EDFL and finely optimizing the intracavity polarization, various solitons, and dual-wavelength solitons were also observed. Moreover, the dynamic evolution of spectra and pulses in YDFL was simulated using scalar nonlinear Ginzburg-Laudau equation (GLE). Our work well demonstrated the broadband and high-efficiency saturable absorption in CuO nanorods, paving the path for investigating multi-soliton dynamics and broadband ultrafast photonics.

Electronic, optical, and thermoelectric characteristics of (Ae)xFBiS2 (Ae=Sr, Ba, and x=1.7) layered materials useful in optical modulator devices

The recent discovery of superconductivity behavior in the mother BiS2-layered compounds has captivated the attention of several physicists. The crystal structure of superconductors with alternate layers of BiS2 is homologous to that of cuprates and Fe-based superconductors. The full-potential linearized augmented plane-wave (FP-LAPW) technique was utilized to investigate the electronic structures and density of states in the vicinity of the Fermi energy of SrFBiS2 and BaFBiS2 compounds under the electron carriers doping. The introduction of electron doping (carries doping) reveals that the host compounds SrFBiS2 and BaFBiS2 exhibit features indicative of superconductivity. This carrier doping of SrFBiS2 and BaFBiS2 compounds (electron-doped) has a significant impact on the lowest conduction states near the Fermi level for the emergence of the superconducting aspect. The electron doping modifies and induces changes in the electronic structures with superconducting behavior in (Ae)1.7FBiS2(Ae=Sr,Ba) compounds. A Fermi surface nesting occurred under the modification of electrons (carriers) doping in the host compounds SrFBiS2 and BaFBiS2. Furthermore, the optical characteristics of the carrier-doped SrFBiS2 and BaFBiS2 compounds are simulated. Due to the anisotropic behavior, the optical properties of these materials based on BiS2 demonstrate a pronounced polarization dependency. The starting point at zero photon energy in the infrared region is elucidated by considering the Drude features in the optical conductivity spectra of SrFBiS2 and BaFBiS2 compounds, when the electron carriers doping is applied. It was clearly noticed that the spin-orbit coupling (SOC) influences the electronic band structures, density of states, Femi surface, and optical features because of the heavy Bismuth atom, which may disclose fascinating aspects. Further, we conducted simulations to assess the thermoelectric properties of these mother compounds. The two BiS2-layered compounds could be suitable for practical thermoelectric purposes and are highlighted through assessment of electrical conductivity, thermal conductivity, Seebeck coefficient, and power factor. As a result, we propose that the mechanisms of superconducting behavior in BiS2 family may pave new avenues for investigating the field of unconventional superconductivity. It may also provide new insights into the origin of high-Tc superconductivity nature.

B&lt;sub&gt;5&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt; Nanocarrier Functionalized with Al, C, Si Atoms: A Drug Delivery Method for Infectious Disease Remedy

As proof has recommended a close connection between COVID-19 and neurodegenerative disorders, this article aims to investigate the chloroquine (CLQ) drug as the SARS-CoV-2’s primary protease, which can prevent in vitro viral duplication of all diverse experiments to present. CLQ is an anti-viral drug enlarged by Pfizer, which can operate as an orally effective 3C-like protease inhibitor. In this study, CLQ has been assessed for its effectiveness against coronavirus by trapping it within a boron nitride nanocage (B&lt;sub&gt;5&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt;_NC) functionalized with specific atoms for drug delivery. This procedure relies on the principle of direct electron transfer and can be elucidated using density functional theory (DFT) in quantum mechanics methods. It was performed the theoretical method of the B3LYP/6-311+G(d,p) to account for the aptitude of B&lt;sub&gt;5&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt;_NC for grabbing CLQ drug via density of electronic states, nuclear quadrupole resonance, nuclear magnetic resonance, and thermodynamic specifications. Finally, the resulting amounts illustrated that using B&lt;sub&gt;5&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt;_NC functionalized with aluminum (Al), carbon (C), and silicon (Si) for adsorbing CLQ drug towards formation of CLQ@Al–B&lt;sub&gt;4&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt;_NC, CLQ@C–B&lt;sub&gt;4&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt;_NC, CLQ@Si–B&lt;sub&gt;4&lt;/sub&gt;N&lt;sub&gt;10&lt;/sub&gt;_NC might provide the reasonable formula in drug delivery technique which can be fulfilled by quantum mechanics computations due to physicochemical properties of PDOS, NMR, NQR, and IR spectrum. An overview of recent developments in nanocage-based drug delivery systems will be provided, including the design of nanocages and atom-doped nanocages.

Tuning the thermoelectric and optoelectronic attributes of lead-free novel fluoroperovskites Cs2BB'F6 (B = Rb, In, Na and B'=Ir, As, Rh): A first-principles investigation

Cesium-based double perovskite materials have generated significant interest because of their fascinating prospects in various optoelectronic and thermoelectric uses. In this manuscript, the physical characteristics of Cs2BB'F6 (B = Rb, In, Na and B' = Ir, As, Rh) are investigated in detail. Volume optimization curves, negative formation energies, tolerance factor and octahedral tilting are used to evaluate the structural stability. Pugh's ratio, Cauchy pressure and Poisson's ratio endorses the ductile character of all studied perovskites. Debye temperature shows that Cs2NaRhF6 is a stiffer material in comparison to Cs2InAsF6 and Cs2RbIrF6. The electronic bandgap and total density of states of Cs2InAsF6, Cs2RbIrF6, and Cs2NaRhF6 reveal a direct band gap of 2.76 eV, 3.78 eV and 3.6 eV, respectively. Furthermore, Kramer-Kronig equations are used to examine the interaction of studied double perovskites with electromagnetic radiation. The optical parameters reveal the absorption in UV region, which show their potential for laser and UV-shields applications. In Addition, thermoelectric characteristics are calculated using the semi-classical Boltzmann theory, extending the investigation up to 800 K. The large ZT value of 0.92 is achieved for Cs2RbIrF6 at 800K, while Cs2InAsF6 and Cs2NaRhF6 exhibit 0.76 and 0.82 at 800K, respectively. Their high ZT values and electrical conductivity enhance their suitability for use in renewable energy devices.

Influence of the Quantum Capacitance on Electrolyte Conductivity through Carbon Nanotubes.

In recent experiments, unprecedentedly large values for the conductivity of electrolytes through carbon nanotubes (CNTs) have been measured, possibly owing to flow slip and a high pore surface charge density whose origin remains debated. Here, we model the coupling between the CNT quantum capacitance and the classical electrolyte-filled pore one and study how electrolyte transport is modulated when a gate voltage is applied to the CNT. Our work shows that under certain conditions the quantum capacitance is lower than the pore one due to the finite quasi-1D CNT electronic density of states and therefore controls the CNT surface charge density that dictates the confined electrolyte conductivity. The dependence of the computed surface charge and conductivity on reservoir salt concentration and gate voltage is thus intimately related to the electronic properties of the CNT. This approach provides key insight into why metallic CNTs have larger experimentally measured conductivities than semiconducting ones.

Quantum capacitance, structural, optical and electronic properties of Zr2CT2 (T = F, P, Cl, Se, Br, O, S, OH) MXenes: A DFT study

Surface functionalization with termination functional groups plays a crucial role in the design of supercapacitors and electrode materials, whereas the understanding of the relevant mechanisms is still rather limited. Here, the quantum capacitance, work function and the related electronic and optical properties of eight functionalized MXenes Zr2CT2 monolayers (with functional group T = O, F, S, Cl, Br, OH, P and Se) are comprehensively investigated, by employing the first-principle calculations. All systems except Zr2CP2 are found to exhibit good stability. Modification with oxygen functional groups makes Zr2C change from metal to semiconductors. Surface functionalization modifies the work function of the MXenes by altering the Fermi level and the associated electron transfers. Particularly, the extremely low work function of Zr2C(OH)2 may enhance its power efficiency in optoelectronic fields. Introduction of functional groups may tune the density of electronic states near the Fermi level and effectively modulate the quantum capacitance and type of electrode materials. Zr2C suitable for symmetric supercapacitors and the modified systems applicable for potential anode or cathode materials are illustrated. The types of these electrode materials would not change in a wide voltage range. Further analyses on the optical properties and Bader charge are conducted for these materials.

Influence of electronic transport mechanism optimization on the thermoelectric properties of ZnO based functional ceramics

ZnO is one of the most promising mid-high temperature thermoelectric materials because of low cost, easy preparation and favorable chemical stability. Herein, the influence mechanism of Alkaline earth metal Ba doping on the thermoelectric properties of ZnO was studied. It is found that Ba doping can effectively improve the carrier mobility and electrical conductivity for that Ba doping can shorten the Zn–O bond and enhance the overlap and hybridization of electron orbitals. The electronic density of states of Zn and O is significantly enhanced. The highest power factor of ∼7.95 μWcm−1K−2 was obtained at 873 K, which is ∼1.4 times higher than that of the undoped sample. Due to the decrease of Young’s modulus caused by Ba doping and the enhancement of phonon scattering of heavy element, the thermal conductivity decreases obviously in the whole temperature range. Ba doping enhanced the effect of phonon glass-electron crystal, and the ZT value of ∼0.345 was obtained at 873 K, which is ∼3.52 times as that of the pristine ZnO. The results indicated that alkaline earth metal doping is an effective way to improve the thermoelectric properties of ZnO functional materials.

A first-principles investigation of internal energy and entropy of formation of charged defects in Th1−xUxO2 (x ≤ 0.5)

Mixed thorium/uranium dioxide, (Th,U)O2, is under consideration for advanced nuclear fuel applications. Investigating the point defect structure and energy in this oxide is important for predicting its behavior as fuel. In this work, we use first-principles calculations based on the generalized gradient approximation (GGA)+Hubbard U approach to investigate the internal energy and entropy of the formation of point defects in Th1−xUxO2 at various compositions below x ≤ 0.5. Point defects including O vacancies, O interstitials, Th vacancies, Th interstitials, U vacancies, and U interstitials have all been considered with their charges ranging from neutral to the maximum nominal values. The observed trends have been explained in terms of electronic density of states. The valence band maxima of crystals that contain defects play a crucial role and exhibit variations depending on the U content and the applied charge. The temperature dependence of internal energy and entropy of formation of defects have also been examined. The internal energy of formation of defects was found to exhibit slowly varying or constant values with respect to changes in the U content, except at low values of x and low temperatures. The entropy of formation of defects was observed to decrease with increasing U content. It was additionally observed that the entropy of formation of vacancies increases with temperature, while that of interstitials decreases. This investigation further revealed that at 0 K, the cation vacancies and anion interstitials become increasingly favorable with increasing U content, while cation interstitials and anion vacancies become less favorable.