Electronic Bridge Research Articles

Construction of Conjugated Organic Polymers for Efficient Photocatalytic Hydrogen Peroxide Generation with Adequate Utilization of Water Oxidation.

The visible-light-driven photocatalytic production of hydrogen peroxide (H2O2) is currently an emerging approach for transforming solar energy into chemical energy. In general, the photocatalytic process for producing H2O2 includes two pathways: the water oxidation reaction (WOR) and the oxygen reduction reaction (ORR). However, the utilization efficiency of ORR surpasses that of WOR, leading to a discrepancy with the low oxygen levels in natural water and thereby impeding their practical application. Herein, we report a novel donor-bridge-acceptor (D-B-A) organic polymer conjugated by the Sonogashira-Hagihara coupling reaction with tetraphenylethene (TPE) units as the electron donors, acetylene (A) as the connectors and pyrene (P) moieties as the electron acceptors. Notably, the resulting TPE-A-P exhibits a remarkable solar-to-chemical conversion of 1.65% and a high BET-specific surface area (1132 m2·g-1). Furthermore, even under anaerobic conditions, it demonstrates an impressive H2O2 photosynthetic efficiency of 1770 μmol g-1 h-1, exceeding the vast majority of previously reported photosynthetic systems of H2O2. The outstanding performance is attributed to the effective separation of electrons and holes, along with the presence of sufficient reaction sites facilitated by the incorporation of alkynyl electronic bridges. This protocol presents a successful method for generating H2O2 via a water oxidation reaction, signifying a significant advancement towards practical applications in the natural environment.

Construction of direct-Z-scheme heterojunction photocatalyst of g-C3N4/Ti3C2/TiO2 composite and its degradation behavior for dyes of Rhodamine B

Direct-Z-scheme g-C3N4/Ti3C2/TiO2 photocatalyst with giant internal electric field were prepared by one-step aqueous sonication self-assembly method using g-C3N4 and MXene of Ti3C2 as the source materials. The chemical composition and structure of the catalysts was characterized by FT-IR, XRD, SEM, TEM and XPS. The XPS characterization indicated that Ti3C2 was partially oxidized to TiO2 during the composite process. As a result, an efficient direct-Z-scheme heterojunction structure consisting of the g-C3N4 and TiO2 with Ti3C2 as an electron bridge was constructed. The photocatalytic performance of the prepared catalysts was evaluated by degrading the rhodamine B (RhB) wastewater. Compared with the single g-C3N4, the g-C3N4/Ti3C2/TiO2 composite photocatalyst exhibited efficient and stable photocatalytic degradation ability, with a degradation efficiency as high as 99.2% for RhB under optimal conditions (2% Ti3C2, pH=3). The high degradation performance of g-C3N4/Ti3C2/TiO2 for RhB was attributed to the combination of Ti3C2, TiO2, and g-C3N4 components, forming a direct-Z-scheme heterojunction with a high-speed electron transport channel structure. The role of Z-scheme heterojunctions in electron transport is verified by photoelectrochemical characterization, along with photoluminescence (PL). Our research provides a simple method to design photocatalysts by constructing direct-Z-scheme electron transport channels for highly efficient treatment of dye wastewater.

Surface vacancy engineering powered reverse cation exchange in preparing CuZnS hollow nanoboxs for efficient photocatalytic hydrogen evolution

The cation exchange technology plays a significant role in designing high-performance photocatalysts at atomic scale. However, the chemical kinetic energy barrier greatly limits the application of cation exchange strategies. Herein, an effective surface vacancy engineering powered reverse cation exchange strategy was exploited to realize energy-unfavored cation exchange reactions. Cu vacancies are created on the surface of Cu2-xS nanoboxs (Cu2-xS NBs), which are subsequently occupied by Zn2+ ions. A hollow CuZnS nanoboxs (CuZnS NBs) were successfully prepared for photocatalytic hydrogen evolution. The prepared CuZnS NBs has abundant interfacial Zn-S bonds, which promote interfacial charge transfer (IFCT) as a rapidly electron bridge. In particular, the photocatalytic hydrogen evolution rate of CuZnS NBs under visible light is 2.06 mmol·g−1·h−1, which is 5.9 times higher than that of Cu2-xS. The synthetic mechanism and photocatalytic mechanism of the CuZnS was investigated from experiment and theoretical calculations. The surface vacancy powered reverse cation exchange strategy offers a new opportunity for the rational tailoring new-generation photocatalysts at the atomic scale.

Boosting photocatalytic activity in ternary lamellar hierarchical structured ZnFe2O4/polymeric carbon nitride by constructing an electronic bridge

Photocatalytic technology is one of the ideal approaches for clean energy production and environmental pollution control in the future. However, the rapid recombination of photo-generated charge carriers is a bottleneck problem of low solar energy conversion efficiency. Herein, a magnetic ZnFe2O4/Pt/polymeric carbon nitride (PCN) semiconductor catalyst is designed and prepared for high-performance photocatalytic hydrogen production reaction and photocatalytic degradation rate of RhB. It exhibits 339.31 μmol·g−1·h−1 hydrogen production rate and 96.08 % photocatalytic degradation rate of RhB within 120 min under visible light. The introduction of Pt, constructing an electronic bridge, accelerated the transfer of photo-generated carriers, meanwhile, the smaller band gap of the ternary composites enabled the generation of more photo-generated electrons. The internal electric field accelerated the accumulation of electrons and holes in the conduction band of ZnFe2O4 and valence band of PCN, thus photocatalytic activity is greatly enhanced. The electron-hole separation is also improved and the transport of photo-generated electrons is facilitated by the special structure of the heterojunction and the unique morphology of PCN. In addition, the used catalyst can be recovered through magnetic fields, and this magnetic catalytic system has great application prospects in the fields of photocatalytic hydrogen production and pollutant degradation.

Carbon bridge effects regulate TiO2-acrylate fluoroboron coatings for efficient marine antifouling

Synergy strategy of photocatalysts and polymer resins are promising technology for marine antifouling. However, it is still a main challenge to obtain a green, safe, and efficient antifouling coatings. Herein, carbon (graphene or CNT) modified TiO2 photocatalyst was synthesized via hydrothermal and annealing process and has successfully applied in acrylate fluoroboron polymer (ABFP) composite coating. Morphology and chemical composition were detailed characterized. The graphene or CNT acted as a bridge with supplemental spatial structures (petal gaps, entanglement) and new functional groups (C-O, C-Ti-O, etc.) on TiO2 particle. Carbon nanotube (CNT) modified TiO2-ABFP coatings (BTCP) achieved excellent antibacterial and anti-diatom adhesion rate of 89.33%-96.70% and 99.00%-99.50%, which was 1.84-4.94-fold more than that of the single ABFP. CNT or graphene served as electronic bridges was considered as the crucial mechanism, which significantly improved the light absorption range and capacity, conductivity, and photoelectric response of TiO2, and further accelerated the generation and transfer of free radicals to the surface of BTCP or FTGP. Moreover, the improvement of catalyst activity synergizes with the smooth surface, hydrophilicity, and slow hydrolysis of composite coatings, achieved long-term and efficient antifouling performance. This work provides a new insight into the modification of TiO2 and antifouling mechanism of polymer coating.

Constructing N-Pd-O electron bridge between In2O3 nanotubes and g-C3N4 nanosheets to boost explosive gas sensing performance

Portable sensing systems can benefit greatly from low-temperature gas sensors for monitoring low-ppm volatile organic compounds (VOCs), flammable, and explosive gases in enclosed environments. Here, we developed a gas sensor for efficient detection of ethanol and low-concentration H2 at low temperatures, using exfoliated graphitic carbon nitride (g-C3N4) homogeneously loaded with mixed phases of palladium oxide (PdOx) on indium oxide (In2O3) nanotubes to reduce the operating temperature of the sensor and improve the sensitivity, response speed, and detection limit. The optimal working temperature for the sensor based on the heterojunction of g-C3N4/PdOx and In2O3 nanotubes (ECN-PdOx/In2O3) is reduced from 220 °C to 180 °C as a result of logical catalytic state regulation and the introduction of electronic and chemical sensitization by constructing N-Pd-O electron bridge between In2O3 nanotubes and g-C3N4 nanosheets to boost explosive gas sensing performance. Additionally, the gas-sensitive performance investigation revealed that the response of ECN-PdOx/In2O3 to 100 ppm ethanol was up to 320, which was 17 times higher than that of pristine In2O3 and 3.2 times greater than that of PdO-modified In2O3 (PdO/In2O3). Moreover, the sensor based on ECN-PdOx/In2O3 also showed a clear response of 1.56 to 100 ppb H2, while no obvious response of pristine In2O3 and further calculation and analysis obtained that the detection limit of ECN-PdOx/In2O3 for H2 is as low as 23 ppb.

Loading and identifying various charged thorium ions in a linear ion trap with a time-of-flight mass spectrometer

Various charged thorium ions such as singly charged, doubly charged, and triply charged thorium ions trapped in the ion trap can be used to excite the Th-229 first nuclear excited state via the electronic bridge process. We present an integration of a linear ion trap with a time-of-flight mass spectrometer to investigate trapped Th-232 ions. Various charged thorium ions are produced by laser ablation and dynamically loaded into the ion trap. After sufficient collisional cooling, thorium ions are extracted along one of the radial directions for time-of-flight mass spectrometry by rapidly quenching the trapping potential and applying high-voltage extracting pulses. The charge states of thorium ions are identified and the maximum mass resolutions of thorium ions reach ∼100 with initial 300 K collisional cooling. The velocity distributions of ablated various charged thorium ions are measured, and the results agree well with Monte Carlo simulation. Lifetimes of thorium ions are determined to be a few tens of seconds in the ion trap, which are helpful for further spectroscopic studies of Th-229 nuclear transition.

Non-trivial topological surface states regulation of 1 T-OsCoTe2 enables selective C―C coupling for highly efficient photochemical CO2 reduction toward C2+ hydrocarbons

Despite ongoing research, the rational design of non-trivial topological semimetal surface states for the selective photocatalytic CO2 conversion into valuable products remains full of challenges. Herein, we present the synthesis of lattice-matched 1 T-OsCoTe2 for the photoreduction upgrading of CO2 to tri-carbon (C3) alkane (propane, C3H8) by the integration of experimental work and theory prediction/calculation. Experimental studies suggested a high electron-based selectivity of 71.2 % for C3H8 and an internal quantum efficiency of 54.6 % at 380 nm. In-situ X-ray photoelectron spectroscopy and X-ray absorption fine structure spectroscopy demonstrated that Co and Os atoms coordinated with Te atoms enable an efficient Os―Te―Co electron transfer to activate the generation of *CH3, *CHOCO and *CH2OCOCO. Density functional theory calculations further confirmed Os―Te―Co electron bridging on the improved CO2 conversion kinetics. To our knowledge, this is the first report suggesting the role of Os atoms in accelerating the photocatalytic CO2 conversion activity of the topological semimetal 1 T-OsCoTe2.

Key role of carbon as an efficient electron bridge in CuO@C@Fe2O3 for enhancing H2O2 activation during photo-assisted Fenton-like reaction

The Fe3+/Fe2+ cycle has been identified as the rate-limiting step in the Fenton system, and many efforts have been made to promote the Fe3+ reduction via external electrons provided by various electron donors. However, how to design an efficient electron transport pathway and then inhibit the invalid electron shuttle has been largely underestimated. In this study, two kinds of heterogeneous Fenton catalysts of CuO@Fe2O3 and CuO@C@Fe2O3 were prepared. The key role of carbon in transporting electrons as an electron bridge and its enhancement mechanism in photo-assisted Fenton-like performances were explored in detail. Compared with CuO@Fe2O3, the removal efficiency of tetracycline (TC) and the corresponding pseudo-first order reaction rate constants over CuO@C@Fe2O3 increased significantly from 88.6 % and 0.1054 min−1 to 99.7 % and 0.2058 min−1, respectively. Based on a series of probe experiments, visible light irradiation can promote the reduction of Cu2+ to Cu+, then the carbon in CuO@C@Fe2O3 can effectively transfer electrons from Cu+ to Fe3+, enhancing the Fe3+/Fe2+ cycle and the following Fenton-like efficiency. Since more ·OH while less ∙O2- was produced over CuO@C@Fe2O3, which further supports the fact that the enhanced Fe3+/Fe2+ cycle was due to the transfer electron from Cu+ to Fe3+ instead of the Haber-Wiss mechanism. Hence, this study provides new insight for effectively improving the transfer efficiency and effective utilization of electrons in Fenton systems.

Core–shell CoN@Co ultra-stable nanoparticles on biochar for contamination remediation in water and soil

Nanomaterials have been extensively employed in various applications over the past several decades, however, the stability of functional nanoparticle catalysts (NPCs) for effective degradation of organic contaminants remains a significant challenge. Herein, we present a cost-effective biochar loaded uniformly dispersed ultra-stable Co nanoparticles with an average diameter of 8 nm as a highly efficient peroxymonosulfate (PMS) activation catalyst. The reactive radicals produced from the catalyst/PMS system are able to degrade several model organic pollutants of environmental and public health concerns, including trichlorobiphenyl, bisphenol A and diethyl phthalate, with less pH limitation and Co2+ leaching. Mechanism investigation demonstrates that the CoN plays the key role in the catalyst stability and PMS activation via acid resistance and electron bridging effects, respectively. Meanwhile, the incorporation of nitrogen (N) and sulfur (S) atoms within the substrate is considered to bolster the adhesion strength between metal nanoparticles and the carbon matrix via strong metal-support interaction. The catalyst was further applied in practical treatment of water and soil polluted by organic pollutants, exhibiting a satisfactory degradation efficiency (> 90% in 60 min) for environmental applications.

Analysis of Arch Bridge Condition Data to Identify Network-Wide Controls and Trends

This paper outlines an initial analysis of 20 years of data held on an electronic bridge management database for approximately 3500 arch bridges across Northern Ireland (NI) by the Department for Infrastructure. Arch bridges represent the largest group of bridge types, making up nearly 56% of the total bridge stock in NI. This initial analysis aims to identify trends that might help inform maintenance decisions in the future. Consideration of the Bridge Condition Indicator (BCI) average value for the overall arch bridge stock indicates the potential for regional variations in the overall condition and the potential for human bias in inspections. The paper presents the most prevalent structural elements and associated defects recorded in the inspections of arch bridges. This indicated a link to scour and undermining for the worst-conditioned arch bridges. An Analysis of Variance (ANOVA) analysis identified function, number of spans, and deck width as significant factors during the various deterioration stages in a bridge’s lifecycle.

Pop-up Langmuir probe diagnostic in the water cooled divertor of Wendelstein 7-X.

The design, development, and successful implementation of pop-up Langmuir probes installed in the water-cooled divertor of W7-X are described. The probes are controlled by drive coils (actuators) installed behind the divertor plates. These drive coils make use of the magnetic field in W7-X to move the probe tips into and out of the plasma. The drive coils were installed in the vacuum vessel after extensively testing the durability of the coils and analyzing the criteria for safe operation. The probe design is carefully tailored for each of the 36 probe tips in order to be suitable for the different magnetic field configurations used in W7-X and ensure that the probes do not present leading edges to the magnetic flux tubes. An electronic bridge circuit is used for measurement to compensate for the effects of signal propagation time on the long cable lengths used. The diagnostic is integrated with the segment control of W7-X for automated operation and control of the diagnostic. The evaluation of the results from the plasma operation is presented after accounting for appropriate sheath expansion for negative bias voltage on the probes.

0D/2D Bi2MoO6 quantum dots /rGO heterojunction boosting full solar spectrum-driven photothermal catalytic CO2 reduction to solar fuels

The photothermal-catalyzed CO2 reduction is severely limited by the low carrier transport capacity. In this paper, the in-situ construction of 0D/2D Bi2MoO6 (BMO)/reduced Graphene Oxide (rGO) heterojunction was synthesized. The excellent photothermal conversion ability of rGO promotes the high dispersion of BMO quantum dots (QDs). The size of synthesized BMO QDs is about 4.26 nm and the temperature of the catalysts can quickly rise to 68.0 °C. XPS results show that the C–O–Bi interfacial electronic bridge between surface oxygen-containing groups and BMO QDs was successfully induced by modulating the degree of GO reduction. Electrons generated by BMO QDs migrate to the rGO surface rapidly, inducing rGO as a new electron-rich surface for rapid activation of CO2. The 1:5 BMO/rGO (NaBH4) CO yield reaches 186.87 μmol/g, which is 4.64 times as much as BMO QDs.

Controllable Modulation of Third‐Order NLO Properties by Polymer‐Modified MOFs Core@Shell Nanoarchitecture

AbstractThe delocalization and rearrangement of π electron clouds in space is the crucial source of regulating nonlinear optical (NLO) performance. Herein, a core‐shell metal organic framework (MOF)‐heterojunction is constructed to achieve the effect of tuning NLO properties by promoting charge transfer through multiple interactions between heterogeneous interfaces. [Cd(L)(4,4′‐bpy)(H2O)]n (Cd‐MOF) is selected to coat on polyaniline (PANI) surface to form PANI@Cd‐MOF. The constructed heterojunction displays an enhanced reverse saturation absorption (RSA) signal compared with Cd‐MOF, and it should be noted that the third‐order NLO refractive behavior changes from the self‐defocusing of Cd‐MOF to the self‐focusing of PANI@Cd‐MOF. It is proposed that high‐speed electronic communication bridges established via the rich hydrogen bond network (O… H‐N) and π–π interactions between heterogeneous interfaces can effectively modify the π electron cloud density that finally regulates the NLO properties. This work is believed to provide new avenues and insights for the design of third‐order NLO materials.

Constructing Nano-Heterostructure with Dual-Site to Boost H2O2 Activation and Regulate the Transformation of Free Radicals.

A major issue with Fenton-like reaction is the excessive consumption of H2O2 caused by the sluggish regeneration rate of low-valent metal, and how to improve the activation efficiency of H2O2 has become a key in current research. Herein, a nano-heterostructure catalyst (1.0-MnCu/C) based on nano-interface engineering is constructed by supporting Cu and MnO on carbon skeleton, and its kinetic rate for the degradation of tetracycline hydrochloride is 0.0436 min-1, which is 2.9 times higher than that of Cu/C system (0.0151 min-1). The enhancement of removal rate results from the introduced Mn species can aggregate and transfer electrons to Cu sites through the electron bridge Mn-N/O-Cu, thus preventing Cu2+ from oxidizing H2O2 to form O2 •-, and facilitating the reduction of Cu2+ and generating more reactive oxygen species (1O2 and ·OH) with stronger oxidation ability, resulting in H2O2 utilization efficiency is 1.9 times as much as that of Cu/C. Additionally, the good and stable practical application capacity in different bodies demonstrates that it has great potential for practical environmental remediation.

Biomimetic Design of a Dynamic M-O-V Pyramid Electron Bridge for Enhanced Nitrogen Electroreduction.

Electrochemical nitrogen reduction reaction (eNRR) offers a sustainable route for ammonia synthesis; however, current electrocatalysts are limited in achieving optimal performance within narrow potential windows. Herein, inspired by the heliotropism of sunflowers, we present a biomimetic design of Ru-VOH electrocatalyst, featuring a dynamic Ru-O-V pyramid electron bridge for eNRR within a wide potential range. In situ spectroscopy and theoretical investigations unravel the fact that the electrons are donated from Ru to V at lower overpotentials and retrieved at higher overpotentials, maintaining a delicate balance between N2 activation and proton hydrogenation. Moreover, N2 adsorption and activation were found to be enhanced by the Ru-O-V moiety. The catalyst showcases an outstanding Faradaic efficiency of 51.48% at -0.2 V (vs RHE) with an NH3 yield rate exceeding 115 μg h-1 mg-1 across the range of -0.2 to -0.4 V (vs RHE), along with impressive durability of over 100 cycles. This dynamic M-O-V pyramid electron bridge is also applicable to other metals (M = Pt, Rh, and Pd).

Graphene-decorated novel Z-scheme Bi@MOF composites promote high performance photocatalytic desulfurization

The Z-scheme photocatalyst constructed based on bismuth-based metal oxides (BMO) and metal–organic frameworks (MOF) holds significant potential for effectively degrading odorous Reduced Sulfur Compounds (RSC) due to its robust redox capabilities. However, challenges such as lattice mismatch, interface defects, and rapid recombination of photogenerated charges substantially impede the Z- scheme charge transfer in BMO@MOF photocatalysts. In this research, graphene was introduced into the BiVO4@NH2-UiO-66 system as an electron bridge and co-catalyst to reduce the interfacial transfer resistance and increase the absorption of near-infrared light, resulting in superior degradability of RSCs compared to both the individual components and BiVO4@NH2-UiO-66. The incorporated graphene not only serves as the growth substrate for BiVO4 and NH2-UiO-66 but also plays a crucial role as an electron mediator in enhancing the vectorial charge transfer from BiVO4 to NH2-UiO-66. This strengthens the Z-scheme charge transfer pathway, suppressing bulk charge recombination, increasing overall carrier density, and maintaining robust redox capabilities. Additionally, the investigation of active species and key intermediate products was conducted to explore potential degradation pathways of RSCs. This work demonstrates a novel approach in promoting photocatalytic degradation of RSCs by harnessing the synergistic effects between doping and heterogeneous structures within the photocatalyst.

Cu2O/WO3 S-scheme heterojunctions for photocatalytic degradation of levofloxacin based on coordination activation

Heterogeneous photocatalytic degradation of antibiotic involves the activation of antibiotic molecules and the photocatalytic oxidation process. However, the simultaneous improvement of these processes is still a challenge. Herein, S-scheme heterojunctions consisted of Cu2O nanocluster with defective WO3 nanosheets were constructed for efficient photocatalytic degradation of levofloxacin (LVX). The typical CNS-5 composite (5 wt% Cu2O/WO3) achieves an optimal LVX degradation efficiency of 97.9% within 80 min. The spatial charge separation and enhancement of redox capacity were realized by the formation of S-scheme heterojunction between Cu2O and WO3. Moreover, their interfacial interaction would lead to the loss of lattice oxygen and the generation of W5+ sites. It is witnessed that the C–N of piperazine ring and CO of carboxylic acid in LVX are coordinated with W5+ sites to build the electronic bridge to activate LVX, greatly promoting the further degradation. This work highlights the important role of selective coordination activation cooperated with S-type heterojunctions for the photocatalytic degradation and offers a new view to understand the degradation of antibiotics at molecular level.

Engineering Co-N-Cr Cross-Interfacial Electron Bridges to Break Activity-Stability Trade-Off for Superdurable Bifunctional Single Atom Oxygen Electrocatalysts.

Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts have exhibited encouraging oxygen reduction reaction (ORR) activity. Nevertheless, the insufficient long-term stability remains a widespread concern owing to the inevitable 2-electron byproducts, H2O2. Here, we construct Co-N-Cr cross-interfacial electron bridges (CIEBs) via the interfacial electronic coupling between Cr2O3 and Co-N-C, breaking the activity-stability trade-off. The partially occupied Cr 3d-orbitals of Co-N-Cr CIEBs induce the electron rearrangement of CoN4 sites, lowering the Co-OOH* antibonding orbital occupancy and accelerating the adsorption of intermediates. Consequently, the Co-N-Cr CIEBs suppress the two-electron ORR process and approach the apex of Sabatier volcano plot for four-electron pathway simultaneously. As a proof-of-concept, the Co-N-Cr CIEBs is synthesized by the molten salt template method, exhibiting dominant 4-electron selectively and extremely low H2O2 yield confirmed by Damjanovic kinetic analysis. The Co-N-Cr CIEBs demonstrates impressive bifunctional oxygen catalytic activity (▵E=0.70 V) and breakthrough durability including 100 % current retention after 10 h continuous operation and cycling performance over 1500 h for Zn-air battery. The hybrid interfacial configuration and the understanding of the electronic coupling mechanism reported here could shed new light on the design of superdurable M-N-C catalysts.

Se-p Orbitals Induced "Strong d-d Orbitals Interaction" Enable High Reversibility of Se-Rich ZnSe/MnSe@C Electrode as Excellent Host for Sodium-Ion Storage.

The heterostructure of transition-metal chalcogenides is a promising approach to boost alkali ion storage due to fast charge kinetics and reduction of activation energy. However, cycling performance is a paramount challenge that is suffering from poor reversibility. Herein, it is reported that Se-rich particles can chemically interact with local hexagonal ZnSe/MnSe@C heterostructure environment, leading to effective ions insertion/extraction, enabling high reversibility. Enlightened by theoretical understanding, Se-rich particles endow high intrinsic conductivities in term of low energy barriers (1.32eV) compared with those without Se-rich particles (1.50eV) toward the sodiation process. Moreover, p orbitals of Se-rich particles may actively participate and further increase the electronegativity that pushes the Mn d orbitals (dxy and dx2-y2) and donate their electrons to dxz and dyz orbitals, manifesting strong d-d orbitals interaction between ZnSe and MnSe. Such fundamental interaction will adopt a well-stable conducive electronic bridge, eventually, charges are easily transferred from ZnSe to MnSe in the heterostructure during sodiation/desodiation. Therefore, the optimized Se-rich ZnSe/MnSe@C electrode delivered high capacity of 576 mAhg-1 at 0.1 Ag-1 after 100 cycles and 384 mAhg-1 at 1 Ag-1 after 2500 cycles, respectively. In situ and ex situ measurements further indicate the integrity and reversibility of the electrode materials upon charging/discharging.